1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: used machinery auction RESALE 12.500 €
Ubicación: Land-mini excavators bobcat e85
construction year: 2015, serial number: b34s12576, 44.4 kw, weight 8,600 kg, hours approx. 1.250 h facilities: 2,300 mm levelling. 450 mm-rubber tracks, 5.7 "- lcd-monitor, engine - and hydraulic control with switch-off, additional hydraulic control with finger pressure actuation, control console lock, hydraulic joystick operation, working headlights, automatic speed control," drive operation with automatic switching, extra hydraulic lines (1st and 2nd cycle) driving motion alarm, parts: 1 bucket 900 mm sw020, 1 bucket 600 mm sw020, 1 bucket 400 mm sw020, 1 spoon of embankment (rigid) 1,500 mm sw020, 1 hydraulic powertilt () auger) 180 Ⱐwith quick comments about the state: maintenance-poor general condition, various abrasions is pointed out explicitly that no complete inventory and verification of the functionality of the auction object has been performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. MINI EXCAVATORS BOBCAT E85 CONSTRUCTION YEAR: 2015, SERIAL NUMBER: B34S12576, 44.4 KW, WEIGHT 8,600 KG, HOURS APPROX. 1.250 H FACILITIES: 2,300 MM LEVELLING. 450 MM-RUBBER TRACKS, 5.7 "- LCD-MONITOR, ENGINE - AND HYDRAULIC CONTROL WITH SWITCH-OFF, ADDITIONAL HYDRAULIC CONTROL WITH FINGER PRESSURE ACTUATION, CONTROL CONSOLE LOCK, HYDRAULIC JOYSTICK OPERATION, WORKING HEADLIGHTS, AUTOMATIC SPEED CONTROL," DRIVE OPERATION WITH AUTOMATIC SWITCHING, EXTRA HYDRAULIC LINES (1ST AND 2ND CYCLE) DRIVING MOTION ALARM, PARTS: 1 BUCKET 900 MM SW020, 1 BUCKET 600 MM SW020, 1 BUCKET 400 MM SW020, 1 SPOON OF EMBANKMENT (RIGID) 1,500 MM SW020, 1 HYDRAULIC POWERTILT () AUGER) 180 ° WITH QUICK COMMENTS ABOUT THE STATE: MAINTENANCE-POOR GENERAL CONDITION, VARIOUS ABRASIONS IS POINTED OUT EXPLICITLY THAT NO COMPLETE INVENTORY AND VERIFICATION OF THE FUNCTIONALITY OF THE AUCTION OBJECT HAS BEEN PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION.
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: 22.000 EU€
Ubicación: Land-the machine is designed for eco-friendly removal of paints and contaminants using a spray of baking soda in various granulations. possibility to use other cleaners - glass, corundum, sand, etc. from the smallest grain granulation (baking soda) to the thickest 2-3 mm. smooth regulation of cleaning power, with surface smooth and rough, without damage. waste throws dry and in water-free modes, hydrodynamically and in a water mix. round nozzles from size # 3 to # 4 and flat nozzles are possible. construction of a carbon and brass steel cleaner, grooved palette. THE MACHINE IS DESIGNED FOR ECO-FRIENDLY REMOVAL OF PAINTS AND CONTAMINANTS USING A SPRAY OF BAKING SODA IN VARIOUS GRANULATIONS. POSSIBILITY TO USE OTHER CLEANERS - GLASS, CORUNDUM, SAND, ETC. FROM THE SMALLEST GRAIN GRANULATION (BAKING SODA) TO THE THICKEST 2-3 MM. SMOOTH REGULATION OF CLEANING POWER, WITH SURFACE SMOOTH AND ROUGH, WITHOUT DAMAGE. WASTE THROWS DRY AND IN WATER-FREE MODES, HYDRODYNAMICALLY AND IN A WATER MIX. ROUND NOZZLES FROM SIZE # 3 TO # 4 AND FLAT NOZZLES ARE POSSIBLE. CONSTRUCTION OF A CARBON AND BRASS STEEL CLEANER, GROOVED PALETTE.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-software: flexa version 4.14, connected load: 3kva, compressed air supply: 50l/min, length: 1712mm, width: 2252mm, height: 1530mm, weight: 2.3t, operational hours: ca. 15000h, including various accessories.  SOFTWARE: FLEXA VERSION 4.14, CONNECTED LOAD: 3KVA, COMPRESSED AIR SUPPLY: 50L/MIN, LENGTH: 1712MM, WIDTH: 2252MM, HEIGHT: 1530MM, WEIGHT: 2.3T, OPERATIONAL HOURS: CA. 15000H, INCLUDING VARIOUS ACCESSORIES.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 29.200 EU€
Ubicación: Land-cnc lathe - a numerically controlled machine tool designed for machining objects most often with a surface of solids (shafts, cones, balls, internal and external threads). the machining tool is most often a turning tool, a drill bit or threading tools, additionally two tools with a separate one drive. the gang tool system consists in the application of many tools permanently installed in the lathe and their use during the production process. machining on a lathe is called turning. turning is performed by turning the workpiece into a rotary motion, and then cutting its surface with a machining tool. the workpiece is fastened for this purpose in the holder with the use of various frames, provided that the workpiece has a diameter of no more than 32 mm. CNC LATHE - A NUMERICALLY CONTROLLED MACHINE TOOL DESIGNED FOR MACHINING OBJECTS MOST OFTEN WITH A SURFACE OF SOLIDS (SHAFTS, CONES, BALLS, INTERNAL AND EXTERNAL THREADS). THE MACHINING TOOL IS MOST OFTEN A TURNING TOOL, A DRILL BIT OR THREADING TOOLS, ADDITIONALLY TWO TOOLS WITH A SEPARATE ONE DRIVE. THE GANG TOOL SYSTEM CONSISTS IN THE APPLICATION OF MANY TOOLS PERMANENTLY INSTALLED IN THE LATHE AND THEIR USE DURING THE PRODUCTION PROCESS. MACHINING ON A LATHE IS CALLED TURNING. TURNING IS PERFORMED BY TURNING THE WORKPIECE INTO A ROTARY MOTION, AND THEN CUTTING ITS SURFACE WITH A MACHINING TOOL. THE WORKPIECE IS FASTENED FOR THIS PURPOSE IN THE HOLDER WITH THE USE OF VARIOUS FRAMES, PROVIDED THAT THE WORKPIECE HAS A DIAMETER OF NO MORE THAN 32 MM.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 1.140 €
Ubicación: Land-<b>properties:</b>

used belt conveyor
color: orange green
material: steel
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
incl. motor and guide <b>specifications:

mass of the belt conveyor</b>
overall length: 1,860 mm
total width: 475 mm

<b>information on the belt</b>
belt width: 400 mm

<b>information on the guide</b>
height: 30mm

<b>information on the motor</b>
type: tp63b4

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to. take advantage of our many years of experience and our excellent network of professionals.

for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED BELT CONVEYOR COLOR: ORANGE GREEN MATERIAL: STEEL IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL INCL. MOTOR AND GUIDE <B>SPECIFICATIONS: MASS OF THE BELT CONVEYOR</B> OVERALL LENGTH: 1,860 MM TOTAL WIDTH: 475 MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 400 MM <B>INFORMATION ON THE GUIDE</B> HEIGHT: 30MM <B>INFORMATION ON THE MOTOR</B> TYPE: TP63B4 <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 7.800 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 900 €
Ubicación: Land-sharping machine for endless abrasive belts.
the subsequent endless abrasive belts be sloping ground at the various stations.
at the last station of the contact cement is then applied. SHARPING MACHINE FOR ENDLESS ABRASIVE BELTS. THE SUBSEQUENT ENDLESS ABRASIVE BELTS BE SLOPING GROUND AT THE VARIOUS STATIONS. AT THE LAST STATION OF THE CONTACT CEMENT IS THEN APPLIED.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 5000 x 2000 x 1500 mm<br/>description: lot composed of suction tubes of various diameters and lengths, see photos WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2000 X 1500 MM
DESCRIPTION: LOT COMPOSED OF SUCTION TUBES OF VARIOUS DIAMETERS AND LENGTHS, SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-sharping machine for endless abrasive belts.
the subsequent endless abrasive belts be sloping ground at the various stations.
at the last station of the contact cement is then applied.
 SHARPING MACHINE FOR ENDLESS ABRASIVE BELTS. THE SUBSEQUENT ENDLESS ABRASIVE BELTS BE SLOPING GROUND AT THE VARIOUS STATIONS. AT THE LAST STATION OF THE CONTACT CEMENT IS THEN APPLIED.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-industrial fans in various power ranges and sizes, hall ventilation extraction, etc. great items available in stock. contact us for more information or questions.  INDUSTRIAL FANS IN VARIOUS POWER RANGES AND SIZES, HALL VENTILATION EXTRACTION, ETC. GREAT ITEMS AVAILABLE IN STOCK. CONTACT US FOR MORE INFORMATION OR QUESTIONS.
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 700 mm<br/>description: see photo WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 700 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-max. bending length: 2160mm, max. bending part height: 203mm, sheet thickness: 1.5-3mm, controls: ras, length: 5350mm, width: 7300mm, height: 2450mm, weight: 6.1t, machines has various defects, but is functional, available after october 2019.  MAX. BENDING LENGTH: 2160MM, MAX. BENDING PART HEIGHT: 203MM, SHEET THICKNESS: 1.5-3MM, CONTROLS: RAS, LENGTH: 5350MM, WIDTH: 7300MM, HEIGHT: 2450MM, WEIGHT: 6.1T, MACHINES HAS VARIOUS DEFECTS, BUT IS FUNCTIONAL, AVAILABLE AFTER OCTOBER 2019.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-there is one press brake amada hds-1030 nt with one industrial robot amada astro 100 nt available, pressing force: 980kn, working length: 3110mm, frame opening: 2700mm, throat depth: 415mm, stroke: 200mm, installation height: 500mm, number of axis: 7, controls: amada amnc ii-as1000 ce, length: 2250mm, width: 4345mm, height: 3325mm, weight: 8.7t, operational hours: ca. 40.000h, the manipulators, equalizer valves and axes have various defects and are in need of overhauling, available after october 2019.  THERE IS ONE PRESS BRAKE AMADA HDS-1030 NT WITH ONE INDUSTRIAL ROBOT AMADA ASTRO 100 NT AVAILABLE, PRESSING FORCE: 980KN, WORKING LENGTH: 3110MM, FRAME OPENING: 2700MM, THROAT DEPTH: 415MM, STROKE: 200MM, INSTALLATION HEIGHT: 500MM, NUMBER OF AXIS: 7, CONTROLS: AMADA AMNC II-AS1000 CE, LENGTH: 2250MM, WIDTH: 4345MM, HEIGHT: 3325MM, WEIGHT: 8.7T, OPERATIONAL HOURS: CA. 40.000H, THE MANIPULATORS, EQUALIZER VALVES AND AXES HAVE VARIOUS DEFECTS AND ARE IN NEED OF OVERHAULING, AVAILABLE AFTER OCTOBER 2019.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of construction: approx. 1985
workspace in x 420 mm
workspace in y: 175 mm
workspace in z: 380 mm
table size: 775 x 205 mm
tool holder: sk 30
speed range: 90-2750 rpm
total power: 1,5 kw / 400 v
machine weight: approx. 700 kg

equipment / accessories:

swivelling vertical milling head
coolant system
various accessories (still unlisted)

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine in advance in our factory under power.
 YEAR OF CONSTRUCTION: APPROX. 1985 WORKSPACE IN X 420 MM WORKSPACE IN Y: 175 MM WORKSPACE IN Z: 380 MM TABLE SIZE: 775 X 205 MM TOOL HOLDER: SK 30 SPEED RANGE: 90-2750 RPM TOTAL POWER: 1,5 KW / 400 V MACHINE WEIGHT: APPROX. 700 KG EQUIPMENT / ACCESSORIES: SWIVELLING VERTICAL MILLING HEAD COOLANT SYSTEM VARIOUS ACCESSORIES (STILL UNLISTED) ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE IN ADVANCE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-"digifold" machine nail morgana digifold 5000p-creasing/folding machine.
various accessories "DIGIFOLD" MACHINE NAIL MORGANA DIGIFOLD 5000P-CREASING/FOLDING MACHINE. VARIOUS ACCESSORIES
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cutting plotter m-12
year 2010, fabr. no. mo120783, surface approx. 1.450 x 1,300 mm, with lateral entry panel with digital display and keyboard, as well as related side loading roller containers with various small accessories CUTTING PLOTTER M-12 YEAR 2010, FABR. NO. MO120783, SURFACE APPROX. 1.450 X 1,300 MM, WITH LATERAL ENTRY PANEL WITH DIGITAL DISPLAY AND KEYBOARD, AS WELL AS RELATED SIDE LOADING ROLLER CONTAINERS WITH VARIOUS SMALL ACCESSORIES
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-weight approx.: 10000 kg<br/>dimensions (l x w x h) approx.: 3000 x 2500 x 2100 mm<br/>description: with bend protection,<br> several bending tool diameters,<br> accessories:<br> -various of bending tools and bending rollers<br> see the screenshot from the manufacturer page(details are not guaranteed)<br> WEIGHT APPROX.: 10000 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2500 X 2100 MM
DESCRIPTION: WITH BEND PROTECTION,
SEVERAL BENDING TOOL DIAMETERS,
ACCESSORIES:
-VARIOUS OF BENDING TOOLS AND BENDING ROLLERS
SEE THE SCREENSHOT FROM THE MANUFACTURER PAGE(DETAILS ARE NOT GUARANTEED)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-complete dairy dairy plant

plant is in the europe

most equipments is unsued, same use it few monhts.

manufacture of year : 2017 to 2011
no.1 cip-line
no.2 milk reception line
n0. 3 pasteurization line
n0. 4 brine (salamura) line
no. 5 yogurt line
no. 6 cheese line
no. 7 mozzarella line
no. 8 fat whey line  (riccota line)
no. 9 packaging line- for finished products
no. 10 steam line
no. 11 ice water line 
no. 12 air line
no. 13 fermentation chamber -system
no. 14 other equipment- -currently out of use or not install.
-polivent cheese vats capacity 3000 lit whit pre presse
and automatic process control
- modular fresh water tank(aisi 304) capacit 12000 lit new equipment 
-tank capacity 3500 lit whit agitator-nord 1,5 kw  - 
-tunnel  for washing plastik molds -1 pieces 
-cutters for small cheese cubes new equipment 
- pump for fresh water apw +55/35  5,5 kw new equipment 
-- heat exchanger (cooler) apw phe-h rk-17 6/1 (aisi 316 -5000 l/h milk—8000 l/h ice water) new equipment-2017 
-- heat exchanger (cooler) apw phe-t4 rgs-16/1(2200 l/h ( various media for example brine 2200 l/h –4000 l/h ice water) approximately 7/8hour from 36¨c—4¨ c- new equipment-2017 year


ask it for more details and video / wetransfer

rgds
atilla
   COMPLETE DAIRY DAIRY PLANT PLANT IS IN THE EUROPE MOST EQUIPMENTS IS UNSUED, SAME USE IT FEW MONHTS. MANUFACTURE OF YEAR : 2017 TO 2011 NO.1 CIP-LINE NO.2 MILK RECEPTION LINE N0. 3 PASTEURIZATION LINE N0. 4 BRINE (SALAMURA) LINE NO. 5 YOGURT LINE NO. 6 CHEESE LINE NO. 7 MOZZARELLA LINE NO. 8 FAT WHEY LINE (RICCOTA LINE) NO. 9 PACKAGING LINE- FOR FINISHED PRODUCTS NO. 10 STEAM LINE NO. 11 ICE WATER LINE NO. 12 AIR LINE NO. 13 FERMENTATION CHAMBER -SYSTEM NO. 14 OTHER EQUIPMENT- -CURRENTLY OUT OF USE OR NOT INSTALL. -POLIVENT CHEESE VATS CAPACITY 3000 LIT WHIT PRE PRESSE AND AUTOMATIC PROCESS CONTROL - MODULAR FRESH WATER TANK(AISI 304) CAPACIT 12000 LIT NEW EQUIPMENT -TANK CAPACITY 3500 LIT WHIT AGITATOR-NORD 1,5 KW - -TUNNEL FOR WASHING PLASTIK MOLDS -1 PIECES -CUTTERS FOR SMALL CHEESE CUBES NEW EQUIPMENT - PUMP FOR FRESH WATER APW +55/35 5,5 KW NEW EQUIPMENT -- HEAT EXCHANGER (COOLER) APW PHE-H RK-17 6/1 (AISI 316 -5000 L/H MILK—8000 L/H ICE WATER) NEW EQUIPMENT-2017 -- HEAT EXCHANGER (COOLER) APW PHE-T4 RGS-16/1(2200 L/H ( VARIOUS MEDIA FOR EXAMPLE BRINE 2200 L/H –4000 L/H ICE WATER) APPROXIMATELY 7/8HOUR FROM 36¨C—4¨ C- NEW EQUIPMENT-2017 YEAR ASK IT FOR MORE DETAILS AND VIDEO / WETRANSFER RGDS ATILLA PLANTA LECHERA LECHERA COMPLETA Mayoría de los equipos es desuso, mismo utilizarlo sacar algunos. Fabricación del año: 2017-2011 LÍNEA DE CIP N º 1 LÍNEA DE RECEPCIÓN DE LECHE NO.2 N0. LÍNEA DE PASTEURIZACIÓN 3 N0. LÍNEA DE LA SALMUERA 4 (SALAMURA) LÍNEA DE YOGUR Nº 5 LÍNEA DE QUESO Nº 6 LÍNEA DE MOZZARELLA Nº 7 NO. 8 SUERO GRASA (LÍNEA DE RICCOTA) NO. 9 EMPAQUE LÍNEA-PARA PRODUCTOS TERMINADOS NO. 10 TUBERÍA DE VAPOR NO. 11 HIELO AGUA LÍNEA AIRE DE Nº 12 NO. 13 FERMENTACIÓN CÁMARA - SISTEMA No. 14 otro equipo lo pregunte para más detalles y Video / WeTransfer Rgds
Vendedor: Ozbek Machinery Trade

Líneas de producción more

Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-bending length: 5100 mm
pressing force: 4000kn
hydraulic crowning
cybelec modeva 12s control
700mm stroke
weight: 48t
2 front attacks with parking position right and x + r axle
3 rear attacks with x + r axis.
2 front arms with r axis.
upper beam with scroll bars in t- and hydraulic. clamp, for various swords
incl. two different swords BENDING LENGTH: 5100 MM PRESSING FORCE: 4000KN HYDRAULIC CROWNING CYBELEC MODEVA 12S CONTROL 700MM STROKE WEIGHT: 48T 2 FRONT ATTACKS WITH PARKING POSITION RIGHT AND X + R AXLE 3 REAR ATTACKS WITH X + R AXIS. 2 FRONT ARMS WITH R AXIS. UPPER BEAM WITH SCROLL BARS IN T- AND HYDRAULIC. CLAMP, FOR VARIOUS SWORDS INCL. TWO DIFFERENT SWORDS "STRAIGHT" + "DEER FOOT" PTUVFE SWORDS WITH T-RECORDING FOR DIFFERENT RADIUS INSERTS TABLE WITH BAKER S RECORDING TABLE WITH PNEUMATICALLY RETRACTABLE SCROLL BARS FOR A LIGHT ROLL OF HEAVY DIES
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 850 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 850 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--bend tube dimensions 70 x 2 mm (material strength 400 n/mm2)
-bending sequence automatically
-maximum bending angle 180 degrees + on suspension - bending radius max 250 mm / min. 40 mm pipe inner edge
-right and left turn - bending speed max. 9.5 k rpm, adjustable
-length of pipe decking approx. 4,300 mm
-fence
-8 bending angle programmable, on decadent aster, autom. forwarding
-autom. mandrel
-counter
-repelling device for bending of frame-closed
-autom. central lubrication system
-electro-hydraulic drive 11,5 kw
-incl. bending tool (26, 9 x 2, 6 mm rm 65 mm / 33, 7 x 2, 9 mm rm 70 mm / 42, 4 x 2, 9 mm rm 75 mm / 48, 3 x 2, 9 mm rm 80 mm / 60, 3 x 2, 9 mm rm 130 mm - various arbors) - incl. steel system links spike hardened and coated for rohrdurchm. 3/4 "/ 26,44 x 1.75 mm manufactured 2017
available from april 2019
 -BEND TUBE DIMENSIONS 70 X 2 MM (MATERIAL STRENGTH 400 N/MM2) -BENDING SEQUENCE AUTOMATICALLY -MAXIMUM BENDING ANGLE 180 DEGREES + ON SUSPENSION - BENDING RADIUS MAX 250 MM / MIN. 40 MM PIPE INNER EDGE -RIGHT AND LEFT TURN - BENDING SPEED MAX. 9.5 K RPM, ADJUSTABLE -LENGTH OF PIPE DECKING APPROX. 4,300 MM -FENCE -8 BENDING ANGLE PROGRAMMABLE, ON DECADENT ASTER, AUTOM. FORWARDING -AUTOM. MANDREL -COUNTER -REPELLING DEVICE FOR BENDING OF FRAME-CLOSED -AUTOM. CENTRAL LUBRICATION SYSTEM -ELECTRO-HYDRAULIC DRIVE 11,5 KW -INCL. BENDING TOOL (26, 9 X 2, 6 MM RM 65 MM / 33, 7 X 2, 9 MM RM 70 MM / 42, 4 X 2, 9 MM RM 75 MM / 48, 3 X 2, 9 MM RM 80 MM / 60, 3 X 2, 9 MM RM 130 MM - VARIOUS ARBORS) - INCL. STEEL SYSTEM LINKS SPIKE HARDENED AND COATED FOR ROHRDURCHM. 3/4 "/ 26,44 X 1.75 MM MANUFACTURED 2017 AVAILABLE FROM APRIL 2019
Vendedor: Reinhard Klein Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 660 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 660 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-well-preserved krumbein plate pie machine in stainless steel.
power
various sheet sizes possible
different programs can be stored.
sale under exclusion of any warranty

inspection by buyer would be good WELL-PRESERVED KRUMBEIN PLATE PIE MACHINE IN STAINLESS STEEL. POWER VARIOUS SHEET SIZES POSSIBLE DIFFERENT PROGRAMS CAN BE STORED. SALE UNDER EXCLUSION OF ANY WARRANTY INSPECTION BY BUYER WOULD BE GOOD
Vendedor: Bäckereimaschinen An - und Verkauf
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 900 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 900 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine is overtaken at the time finished from december 2018

data:

-year of construction: 2009
-6 spindles: 2 x diamond, polishing 2 x, 2 x
-machine is ready for use
-with various spare parts

price for outdated machine: â?¬8.500 MACHINE IS OVERTAKEN AT THE TIME FINISHED FROM DECEMBER 2018 DATA: -YEAR OF CONSTRUCTION: 2009 -6 SPINDLES: 2 X DIAMOND, POLISHING 2 X, 2 X -MACHINE IS READY FOR USE -WITH VARIOUS SPARE PARTS PRICE FOR OUTDATED MACHINE: &ACIRC;?&NOT;8.500
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 500 mm<br/>description: lot composed of electrical heaters of various types, see photo WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 500 MM
DESCRIPTION: LOT COMPOSED OF ELECTRICAL HEATERS OF VARIOUS TYPES, SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-drais mill for scrap. 3 roller 500-600-400, various happle austragung floors under the flour silos, etc. for more information on anfrage.tel.  49 (0) 172 8345457bilder available    DRAIS MILL FOR SCRAP. 3 ROLLER 500-600-400, VARIOUS HAPPLE AUSTRAGUNG FLOORS UNDER THE FLOUR SILOS, ETC. FOR MORE INFORMATION ON ANFRAGE.TEL. 49 (0) 172 8345457BILDER AVAILABLE
Vendedor: Silo- und Förderanlagen H. Schüler
Año de construcción: usado
Precio: used machinery auction RESALE 880 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 150 mm<br/>description: approx 100 pieces, 27 kelch modular cones, 24 modular reductions ø63 to ø64 mm, 19 modular adaptators for tenon cutter holder, 9 modular mandrels weldon with various diameters, 2 clamps modular mandrels er, 2 clamps modular mandrels oz, 2 eccentric clamps modular mandrels for drilling, 12 modular adaptators for boring with various ø, 3 modular drilling mandrels (see pictures for details) WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 150 MM
DESCRIPTION: APPROX 100 PIECES, 27 KELCH MODULAR CONES, 24 MODULAR REDUCTIONS ø63 TO ø64 MM, 19 MODULAR ADAPTATORS FOR TENON CUTTER HOLDER, 9 MODULAR MANDRELS WELDON WITH VARIOUS DIAMETERS, 2 CLAMPS MODULAR MANDRELS ER, 2 CLAMPS MODULAR MANDRELS OZ, 2 ECCENTRIC CLAMPS MODULAR MANDRELS FOR DRILLING, 12 MODULAR ADAPTATORS FOR BORING WITH VARIOUS ø, 3 MODULAR DRILLING MANDRELS (SEE PICTURES FOR DETAILS)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-high pressure pump with compact design for each installation, ceramic piston for durability, integrated soft starter (save power, interface connection box

options for advanced users

drive power kw 37
max flow max pressure bar 4.130
pressure translator concept 4.1 l/min

marking. ec machinery directive ce.

equipment of the machine
standard equipment as hx (water cooling) or oa (oil / air cooling. siemens and eathon control
proportional valve

optionally, various spare parts which has the customer in the store, can be purchased.
 HIGH PRESSURE PUMP WITH COMPACT DESIGN FOR EACH INSTALLATION, CERAMIC PISTON FOR DURABILITY, INTEGRATED SOFT STARTER (SAVE POWER, INTERFACE CONNECTION BOX OPTIONS FOR ADVANCED USERS DRIVE POWER KW 37 MAX FLOW MAX PRESSURE BAR 4.130 PRESSURE TRANSLATOR CONCEPT 4.1 L/MIN MARKING. EC MACHINERY DIRECTIVE CE. EQUIPMENT OF THE MACHINE STANDARD EQUIPMENT AS HX (WATER COOLING) OR OA (OIL / AIR COOLING. SIEMENS AND EATHON CONTROL PROPORTIONAL VALVE OPTIONALLY, VARIOUS SPARE PARTS WHICH HAS THE CUSTOMER IN THE STORE, CAN BE PURCHASED.
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Precio: used machinery auction RESALE 210 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 2500 x 1400 x 1800 mm<br/>description: various lenses and accessories WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 2500 X 1400 X 1800 MM
DESCRIPTION: VARIOUS LENSES AND ACCESSORIES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-high pressure pump with compact design for each installation, ceramic piston for durability, integrated soft starter (save power, interface connection box

options for advanced users

drive power kw 37
max flow max pressure bar 3,800
pressure translator concept 4.1 l/min

marking. gem. ec machine directive hsec 20-c
manufacturer's declaration

equipment of the machine
standard equipment as hx (water cooling) or oa (oil / air cooling. siemens and eathon control
proportional valve

optionally, various spare parts which has the customer in the store, can be purchased.
 HIGH PRESSURE PUMP WITH COMPACT DESIGN FOR EACH INSTALLATION, CERAMIC PISTON FOR DURABILITY, INTEGRATED SOFT STARTER (SAVE POWER, INTERFACE CONNECTION BOX OPTIONS FOR ADVANCED USERS DRIVE POWER KW 37 MAX FLOW MAX PRESSURE BAR 3,800 PRESSURE TRANSLATOR CONCEPT 4.1 L/MIN MARKING. GEM. EC MACHINE DIRECTIVE HSEC 20-C MANUFACTURER'S DECLARATION EQUIPMENT OF THE MACHINE STANDARD EQUIPMENT AS HX (WATER COOLING) OR OA (OIL / AIR COOLING. SIEMENS AND EATHON CONTROL PROPORTIONAL VALVE OPTIONALLY, VARIOUS SPARE PARTS WHICH HAS THE CUSTOMER IN THE STORE, CAN BE PURCHASED.
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 800 mm<br/>description: see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 800 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-2001
work is to dive in and passed, precious thing, it has an automatic loader for both the machining
the maximum working length of 500 mm is to dip
it is equipped with various equipment including mole and dime of various sizes
bath for processing waste with a filter for the separation of metals from
it has all the documents / original manuals.
the machine is in good condition 2001 WORK IS TO DIVE IN AND PASSED, PRECIOUS THING, IT HAS AN AUTOMATIC LOADER FOR BOTH THE MACHINING THE MAXIMUM WORKING LENGTH OF 500 MM IS TO DIP IT IS EQUIPPED WITH VARIOUS EQUIPMENT INCLUDING MOLE AND DIME OF VARIOUS SIZES BATH FOR PROCESSING WASTE WITH A FILTER FOR THE SEPARATION OF METALS FROM IT HAS ALL THE DOCUMENTS / ORIGINAL MANUALS. THE MACHINE IS IN GOOD CONDITION
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 740 x 600 x 800 mm<br/>description: hydraulic, for pipe sizes from 0.5 to 2, various bending dies WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 740 X 600 X 800 MM
DESCRIPTION: HYDRAULIC, FOR PIPE SIZES FROM 0.5 TO 2, VARIOUS BENDING DIES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 of used magna-torque capping head, make crown obrist, type mkeu34 for 28 mm pre-threaded closures. with m52x1.5 adapter (to fit for example zalkin capping machines). with 5 chucks for various types of ribbed closures. 1 OF USED MAGNA-TORQUE CAPPING HEAD, MAKE CROWN OBRIST, TYPE MKEU34 FOR 28 MM PRE-THREADED CLOSURES. WITH M52X1.5 ADAPTER (TO FIT FOR EXAMPLE ZALKIN CAPPING MACHINES). WITH 5 CHUCKS FOR VARIOUS TYPES OF RIBBED CLOSURES.
Vendedor: ERMI HOLLAND B.V.
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 1500 x 900 x 1300 mm<br/>description: for holding collets, speeds from 71 to 900 rpm or 180 to 2240 rpm, turning diameter max. 200 mm, turning length max. 450 mm, tool changing system similar to multifix, accessories: various collets, drill chuck, emergency stop WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 900 X 1300 MM
DESCRIPTION: FOR HOLDING COLLETS, SPEEDS FROM 71 TO 900 RPM OR 180 TO 2240 RPM, TURNING DIAMETER MAX. 200 MM, TURNING LENGTH MAX. 450 MM, TOOL CHANGING SYSTEM SIMILAR TO MULTIFIX, ACCESSORIES: VARIOUS COLLETS, DRILL CHUCK, EMERGENCY STOP
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-code: 0471
brand: lar
model: 180

vertical roller  sanding machine 

table  mm 600 x 500
cast iron structure
tilting table +/- 25 degrees
motor   hp 2   three-phase 
series of rolls, various interchangeable diameters
roller height 180 mm
suction hood
overall dimensions: mm 600 x500 x1050 h
weight kg 180


 CODE: 0471 BRAND: LAR MODEL: 180 VERTICAL ROLLER SANDING MACHINE TABLE MM 600 X 500 CAST IRON STRUCTURE TILTING TABLE +/- 25 DEGREES MOTOR HP 2 THREE-PHASE SERIES OF ROLLS, VARIOUS INTERCHANGEABLE DIAMETERS ROLLER HEIGHT 180 MM SUCTION HOOD OVERALL DIMENSIONS: MM 600 X500 X1050 H WEIGHT KG 180
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 400 kg<br/>dimensions (l x w x h) approx.: 2000 x 510 x 1200 mm<br/>description: with 2 sliding doors, each with 3 insertable compartments (adjustable), accessories various steady rests, 4-jaw chuck, accessories can be used with lot no. 10 WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 510 X 1200 MM
DESCRIPTION: WITH 2 SLIDING DOORS, EACH WITH 3 INSERTABLE COMPARTMENTS (ADJUSTABLE), ACCESSORIES VARIOUS STEADY RESTS, 4-JAW CHUCK, ACCESSORIES CAN BE USED WITH LOT NO. 10
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pot grinder delta lf - 350 -.
14-10-071

shipping time: immediately
number: 14-10-071

manufacturer: delta
type: lf - 350

machine data
year of construction: approx. 1990
l x w x h: approx. 800 x 800 x 1800 mm
weight: approx. 400 kg

very good condition

technical data
control: conventional

loop scope:
grinding length: approx. 360 mm

grinding width: 155 mm

grinding height: approx. 280 mm

magnetic clamping surface: approx. 300 x 150 mm

grinding spindle:
grinding wheel dimensions: approx. ã? 200 x 80 x 78 mm

grinding spindle - speed: approximately 2840 rpm

power: approx. 3,0 kw

z - delivery: manual

grinding movement: manual

accessories
â?¢ permanent - magnet

â?¢ honing device

â?¢ wet grinding device

â?¢ machine housing

â?¢ operating instructions

â?¢ grinding wheels - protection

â?¢ cup grinding wheel

â?¢ various wrenches

â?¢ machine feet

other accessories on request
price and other specifications on request POT GRINDER DELTA LF - 350 -. 14-10-071 SHIPPING TIME: IMMEDIATELY NUMBER: 14-10-071 MANUFACTURER: DELTA TYPE: LF - 350 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1990 L X W X H: APPROX. 800 X 800 X 1800 MM WEIGHT: APPROX. 400 KG VERY GOOD CONDITION TECHNICAL DATA CONTROL: CONVENTIONAL LOOP SCOPE: GRINDING LENGTH: APPROX. 360 MM GRINDING WIDTH: 155 MM GRINDING HEIGHT: APPROX. 280 MM MAGNETIC CLAMPING SURFACE: APPROX. 300 X 150 MM GRINDING SPINDLE: GRINDING WHEEL DIMENSIONS: APPROX. &ATILDE;? 200 X 80 X 78 MM GRINDING SPINDLE - SPEED: APPROXIMATELY 2840 RPM POWER: APPROX. 3,0 KW Z - DELIVERY: MANUAL GRINDING MOVEMENT: MANUAL ACCESSORIES &ACIRC;?&CENT; PERMANENT - MAGNET &ACIRC;?&CENT; HONING DEVICE &ACIRC;?&CENT; WET GRINDING DEVICE &ACIRC;?&CENT; MACHINE HOUSING &ACIRC;?&CENT; OPERATING INSTRUCTIONS &ACIRC;?&CENT; GRINDING WHEELS - PROTECTION &ACIRC;?&CENT; CUP GRINDING WHEEL &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; MACHINE FEET OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 30 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1500 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1500 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-vertical stoã?maschine rai &
ebrahim st iii a - 18-11-008
shipping time: immediately

number: 18-11-008

manufacturer: roscher & eichler
type: st iii a

machine data
year of construction: approx. 1965
l x w x h: approx. 1500 x 1200 x 1800 mm
weight: approx. 1000 kg

very good condition

technical data
control: manual / conventional

shock length (hub): approx. 220 mm

power: approx. 2,0 kw

round table - diameter: approx. ã? 300 mm

round table - turning range: 360 degrees

stroke rate: approx. 45-125 stroke/min

angle plunger head: approx. 10 degrees

throat depth: 350 mm

maximum height: 475 mm

cross table travel range:
x - axis: approx. 420 mm

y - axis: 150 mm

feed range: approx. 0.10; 0.20 / 0.30 mm stroke

part set up round table: manual / automatic

feeds: x & y - axis

accessories
â?¢ various stoã?meisel hss

â?¢ various hss blade

â?¢ various knife holder

â?¢ machine feet

â?¢ 3 - bake - chuck ã? 270 mm

â?¢ operating instructions

â?¢ various wrenches

other accessories on request
price and other specifications on request VERTICAL STO&ATILDE;?MASCHINE RAI & EBRAHIM ST III A - 18-11-008 SHIPPING TIME: IMMEDIATELY NUMBER: 18-11-008 MANUFACTURER: ROSCHER & EICHLER TYPE: ST III A MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1965 L X W X H: APPROX. 1500 X 1200 X 1800 MM WEIGHT: APPROX. 1000 KG VERY GOOD CONDITION TECHNICAL DATA CONTROL: MANUAL / CONVENTIONAL SHOCK LENGTH (HUB): APPROX. 220 MM POWER: APPROX. 2,0 KW ROUND TABLE - DIAMETER: APPROX. &ATILDE;? 300 MM ROUND TABLE - TURNING RANGE: 360 DEGREES STROKE RATE: APPROX. 45-125 STROKE/MIN ANGLE PLUNGER HEAD: APPROX. 10 DEGREES THROAT DEPTH: 350 MM MAXIMUM HEIGHT: 475 MM CROSS TABLE TRAVEL RANGE: X - AXIS: APPROX. 420 MM Y - AXIS: 150 MM FEED RANGE: APPROX. 0.10; 0.20 / 0.30 MM STROKE PART SET UP ROUND TABLE: MANUAL / AUTOMATIC FEEDS: X & Y - AXIS ACCESSORIES &ACIRC;?&CENT; VARIOUS STO&ATILDE;?MEISEL HSS &ACIRC;?&CENT; VARIOUS HSS BLADE &ACIRC;?&CENT; VARIOUS KNIFE HOLDER &ACIRC;?&CENT; MACHINE FEET &ACIRC;?&CENT; 3 - BAKE - CHUCK &ATILDE;? 270 MM &ACIRC;?&CENT; OPERATING INSTRUCTIONS &ACIRC;?&CENT; VARIOUS WRENCHES OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-l + z lathe weiler matador vs 2
04-03-239
shipping time: on request

number: 04-03-239

manufacturer: weiler
type: matador vs 2

machine data
year of construction: approx. 1985
l x w x h: approx. 1500 x 800 x 1500 mm
weight: approx. 550 kg

good general condition

technical data
digital display (plan & o sled): 2 - axes - digital display (fagor)

dimensions:
maximum turning diameter over bed: approx. ã? 280 mm

maximum turning diameter over support: approx. ã? 160 mm

maximum turning length: 500 mm

bar passage: approx. ã? 36 mm

spindle:
speed range: approx. 15-3550 rpm

spindle nose: a 2 - 5

power: approx. 3,0 kw

automatic longitudinal & plan vorschuebe:
feed range: 0.005 1,184 mm / rev

suitable for threads: - metric 0.25-12 mm

"- inch 80-2 gg /"

-diametral - pitch threaded 160-6 dp

-module 0.1-4

tailstock: mk 3

accessories
â?¢ clamping collet fixture 386 s

â?¢ various collets

â?¢ quick change toolpost + 3 inserts

â?¢ work light

â?¢ complete machine documentation

â?¢ drill chuck for tailstock

tip â?¢ ongoing with for tailstock

â?¢ various wrenches

â?¢ motor with motor brake (brake)

other accessories on request
price and other specifications on request L + Z LATHE WEILER MATADOR VS 2 04-03-239 SHIPPING TIME: ON REQUEST NUMBER: 04-03-239 MANUFACTURER: WEILER TYPE: MATADOR VS 2 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1985 L X W X H: APPROX. 1500 X 800 X 1500 MM WEIGHT: APPROX. 550 KG GOOD GENERAL CONDITION TECHNICAL DATA DIGITAL DISPLAY (PLAN & O SLED): 2 - AXES - DIGITAL DISPLAY (FAGOR) DIMENSIONS: MAXIMUM TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 280 MM MAXIMUM TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 160 MM MAXIMUM TURNING LENGTH: 500 MM BAR PASSAGE: APPROX. &ATILDE;? 36 MM SPINDLE: SPEED RANGE: APPROX. 15-3550 RPM SPINDLE NOSE: A 2 - 5 POWER: APPROX. 3,0 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: FEED RANGE: 0.005 1,184 MM / REV SUITABLE FOR THREADS: - METRIC 0.25-12 MM "- INCH 80-2 GG /" -DIAMETRAL - PITCH THREADED 160-6 DP -MODULE 0.1-4 TAILSTOCK: MK 3 ACCESSORIES &ACIRC;?&CENT; CLAMPING COLLET FIXTURE 386 S &ACIRC;?&CENT; VARIOUS COLLETS &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 3 INSERTS &ACIRC;?&CENT; WORK LIGHT &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; DRILL CHUCK FOR TAILSTOCK TIP &ACIRC;?&CENT; ONGOING WITH FOR TAILSTOCK &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; MOTOR WITH MOTOR BRAKE (BRAKE) OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1200 mm<br/>description: see photo WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1200 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)