1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-autom. cassette for warehouse, approximately 489 cassettes, cassette length 6, 60 m, 1, 000 kg/kasstte - used -:
 
price from site: â?¬189.000.-(net), excluding disassembly, transport, etc.!
 
suitable for aluminium or pvc-provile, pipes and steel reinforcement, last for automatic optimised storage of pvc profiles used!
 
manufacturer: remmert
year of 1994/1995, improvements in 2004, 2010
cassette courses: 489 st
cassette payload up to 1000 dan
speed: drive: 80, lifting: 60, telescoping: 18/36 m / min
capacity:
cassettes, small: 150,.
dimensions: 800 x 300 x 6740 mm
internal dimensions: 670 x 220 x 6600 mm.
cassettes, size: 339.
kassettenaussenmasse: 800 x 800 x 6740 mm.
cassette inside dimensions: 670 x 720 x 6600 mm.
control, including lagervervaltung and optimization program, link via an interface with your sawing or processing machine possible. can be used manually.
100% manufacturer-independent, flexible integration of machinery; 100% future-proof through a modular system
mass:
length: 50,546 mm
height: shelf 12.735. mm, overall: 12828 mm, min. height of roof: 12953 mm
width: shelf: 6920 mm., with safety fence: 9163 mm. (+ 1121 x 2) mm.
incl. arrival and removal (4 exchange stations)
l about 15200 mm.,.
in addition adapted acceptance of blank cassettes (crane runway length 28500 mm., producer: fa. univeyor as, denmark)
condition: good, inspection and functional testing after arrangement.
available: available now
site: d AUTOM. CASSETTE FOR WAREHOUSE, APPROXIMATELY 489 CASSETTES, CASSETTE LENGTH 6, 60 M, 1, 000 KG/KASSTTE - USED -: PRICE FROM SITE: Â?¬189.000.-(NET), EXCLUDING DISASSEMBLY, TRANSPORT, ETC.! SUITABLE FOR ALUMINIUM OR PVC-PROVILE, PIPES AND STEEL REINFORCEMENT, LAST FOR AUTOMATIC OPTIMISED STORAGE OF PVC PROFILES USED! MANUFACTURER: REMMERT YEAR OF 1994/1995, IMPROVEMENTS IN 2004, 2010 CASSETTE COURSES: 489 ST CASSETTE PAYLOAD UP TO 1000 DAN SPEED: DRIVE: 80, LIFTING: 60, TELESCOPING: 18/36 M / MIN CAPACITY: CASSETTES, SMALL: 150,. DIMENSIONS: 800 X 300 X 6740 MM INTERNAL DIMENSIONS: 670 X 220 X 6600 MM. CASSETTES, SIZE: 339. KASSETTENAUSSENMASSE: 800 X 800 X 6740 MM. CASSETTE INSIDE DIMENSIONS: 670 X 720 X 6600 MM. CONTROL, INCLUDING LAGERVERVALTUNG AND OPTIMIZATION PROGRAM, LINK VIA AN INTERFACE WITH YOUR SAWING OR PROCESSING MACHINE POSSIBLE. CAN BE USED MANUALLY. 100% MANUFACTURER-INDEPENDENT, FLEXIBLE INTEGRATION OF MACHINERY; 100% FUTURE-PROOF THROUGH A MODULAR SYSTEM MASS: LENGTH: 50,546 MM HEIGHT: SHELF 12.735. MM, OVERALL: 12828 MM, MIN. HEIGHT OF ROOF: 12953 MM WIDTH: SHELF: 6920 MM., WITH SAFETY FENCE: 9163 MM. (+ 1121 X 2) MM. INCL. ARRIVAL AND REMOVAL (4 EXCHANGE STATIONS) L ABOUT 15200 MM.,. IN ADDITION ADAPTED ACCEPTANCE OF BLANK CASSETTES (CRANE RUNWAY LENGTH 28500 MM., PRODUCER: FA. UNIVEYOR AS, DENMARK) CONDITION: GOOD, INSPECTION AND FUNCTIONAL TESTING AFTER ARRANGEMENT. AVAILABLE: AVAILABLE NOW SITE: D
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-amtec vertiwrap weigher 14-head (2.5 liter) stick shaped products<br><br>weighing unit with 14 weighing heads (containers) for very precise weigh checking, with 2.5-liter volume each. special design to suit stick shaped products | reversible vibration motor and v-shaped feeder allows control of product movement. <br><br>- specifications: max. speed of the machine in neutral: 80 cycles/minute | weighing range: 10-1000g | accuracy +/-0.1-2.0g | touchscreen operation | stagger dump | double door hopper to allow faster dropping | stainless steel | 220v, 2.0kw | l1602xw1136xh1561 | 600/650kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP WEIGHER 14-HEAD (2.5 LITER) STICK SHAPED PRODUCTS

WEIGHING UNIT WITH 14 WEIGHING HEADS (CONTAINERS) FOR VERY PRECISE WEIGH CHECKING, WITH 2.5-LITER VOLUME EACH. SPECIAL DESIGN TO SUIT STICK SHAPED PRODUCTS | REVERSIBLE VIBRATION MOTOR AND V-SHAPED FEEDER ALLOWS CONTROL OF PRODUCT MOVEMENT.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MINUTE | WEIGHING RANGE: 10-1000G | ACCURACY +/-0.1-2.0G | TOUCHSCREEN OPERATION | STAGGER DUMP | DOUBLE DOOR HOPPER TO ALLOW FASTER DROPPING | STAINLESS STEEL | 220V, 2.0KW | L1602XW1136XH1561 | 600/650KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-amtec vertiwrap weigher 10-head (2.5 liter) stick shaped products<br><br>weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 2.5-liter volume each. special design to suit stick shaped products | reversible vibration motor and v-shaped feeder allows control of product movement. <br><br>- specifications: max. speed of the machine in neutral: 50 cycles/minute | weighing range: 10-1000g | accuracy +/-0.1-2.0g | touchscreen operation | stagger dump | double door hopper to allow faster dropping | stainless steel | 220v, 1.5kw | l1436xw1086xh1388 | 600/650kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP WEIGHER 10-HEAD (2.5 LITER) STICK SHAPED PRODUCTS

WEIGHING UNIT WITH 10 WEIGHING HEADS (CONTAINERS) FOR VERY PRECISE WEIGH CHECKING, WITH 2.5-LITER VOLUME EACH. SPECIAL DESIGN TO SUIT STICK SHAPED PRODUCTS | REVERSIBLE VIBRATION MOTOR AND V-SHAPED FEEDER ALLOWS CONTROL OF PRODUCT MOVEMENT.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | WEIGHING RANGE: 10-1000G | ACCURACY +/-0.1-2.0G | TOUCHSCREEN OPERATION | STAGGER DUMP | DOUBLE DOOR HOPPER TO ALLOW FASTER DROPPING | STAINLESS STEEL | 220V, 1.5KW | L1436XW1086XH1388 | 600/650KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-vertical - rotary table -.
flat grinding machine lodi dormac
rv 600-14-10-073
shipping time: immediately

number: 14-10-073

manufacturer: lodi dormac
type: rv 600

machine data
year of construction: approx. 2001
l x w x h: approx. 1700 x 1500 x 1900 mm
weight: 1800 kg

very good condition

technical data
control: conventional

loop scope:
grinding diameter: approx. ã? 600 mm

grinding height: approx. 350 mm

grinding spindle:
grinding wheel dimensions: approx. ã? 325 mm

power: approx. 6,0 kw

powered rotary table: approx. 10-20 rpm

z - delivery: manual

grinding movement: manual

accessories
â?¢ splash guard housing
â?¢ vertical rapid traverse
â?¢ manual truing device with 0.75 carats diamond
â?¢ adjustable feet
automatic vertical feed synchronize with table rotation â?¢

other accessories on request
price and other specifications on request VERTICAL - ROTARY TABLE -. FLAT GRINDING MACHINE LODI DORMAC RV 600-14-10-073 SHIPPING TIME: IMMEDIATELY NUMBER: 14-10-073 MANUFACTURER: LODI DORMAC TYPE: RV 600 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 2001 L X W X H: APPROX. 1700 X 1500 X 1900 MM WEIGHT: 1800 KG VERY GOOD CONDITION TECHNICAL DATA CONTROL: CONVENTIONAL LOOP SCOPE: GRINDING DIAMETER: APPROX. &ATILDE;? 600 MM GRINDING HEIGHT: APPROX. 350 MM GRINDING SPINDLE: GRINDING WHEEL DIMENSIONS: APPROX. &ATILDE;? 325 MM POWER: APPROX. 6,0 KW POWERED ROTARY TABLE: APPROX. 10-20 RPM Z - DELIVERY: MANUAL GRINDING MOVEMENT: MANUAL ACCESSORIES &ACIRC;?&CENT; SPLASH GUARD HOUSING &ACIRC;?&CENT; VERTICAL RAPID TRAVERSE &ACIRC;?&CENT; MANUAL TRUING DEVICE WITH 0.75 CARATS DIAMOND &ACIRC;?&CENT; ADJUSTABLE FEET AUTOMATIC VERTICAL FEED SYNCHRONIZE WITH TABLE ROTATION &ACIRC;?&CENT; OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-dreh-Øüber bett:             260 mm<br/>spindle passage:              38 mm<br/>turning length:             350 mm<br/>swing diameter over slide rest: 125 mm<br/>spannzangen-Øfür werkstück:         max. 26 mm<br/>movement of the upper support:     von hand 95 mm<br/>longitudinal slide travel:    von hand 100 mm<br/>turret (x-stations):        6 - fach <br/>aufnahme-Ø:  19,05 mm = 3/4 zoll<br/>feed range:        50 - 750 mm/min<br/>spindle turning speed range: 125 - 2800 u/min<br/>number of spindle speeds: 12 <br/>distance spindle-turret slide: max. 350 mm<br/>bed width: 200 mm<br/>bed length: 1020 mm<br/>power capacity:       1,1 / 2,2 kw<br/>weight of the machine ca.: 0,360 t<br/>dimensions of the machine ca.: 1,3 x 0,6 x 1,2 m<br/>? tongs of 2 - 38 mm,<br/>? chucks Ø 160 mm<br/><br/><br/><br/><br/> DREH-ØüBER BETT: 260 MM
SPINDLE PASSAGE: 38 MM
TURNING LENGTH: 350 MM
SWING DIAMETER OVER SLIDE REST: 125 MM
SPANNZANGEN-ØFüR WERKSTüCK: MAX. 26 MM
MOVEMENT OF THE UPPER SUPPORT: VON HAND 95 MM
LONGITUDINAL SLIDE TRAVEL: VON HAND 100 MM
TURRET (X-STATIONS): 6 - FACH
AUFNAHME-Ø: 19,05 MM = 3/4 ZOLL
FEED RANGE: 50 - 750 MM/MIN
SPINDLE TURNING SPEED RANGE: 125 - 2800 U/MIN
NUMBER OF SPINDLE SPEEDS: 12
DISTANCE SPINDLE-TURRET SLIDE: MAX. 350 MM
BED WIDTH: 200 MM
BED LENGTH: 1020 MM
POWER CAPACITY: 1,1 / 2,2 KW
WEIGHT OF THE MACHINE CA.: 0,360 T
DIMENSIONS OF THE MACHINE CA.: 1,3 X 0,6 X 1,2 M
? TONGS OF 2 - 38 MM,
? CHUCKS Ø 160 MM




Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-box washer is designed for semi-automatic washing kistenów and wooden containers, standard. the use of washers in the process helps to reduce the consumption of water, detergent and energy. once the toll is one case has, the process consists of successive stages automatically washing and rinsing.
high performance and power washing, in conjunction with a professional detergent washing guarantee receipt of the highest quality cleaning items in the continuous washing system with closed circuit washing and rinsing, and technological transfer. thanks to the use of high-pressure fans and to optimize the construction of drying tunnel, it is possible to achieve best drying effects in continuous movement. using additional regulation of flows it is possible to economical setting machines for minimize the consumption of water, energy and detergents.   BOX WASHER IS DESIGNED FOR SEMI-AUTOMATIC WASHING KISTENóW AND WOODEN CONTAINERS, STANDARD. THE USE OF WASHERS IN THE PROCESS HELPS TO REDUCE THE CONSUMPTION OF WATER, DETERGENT AND ENERGY. ONCE THE TOLL IS ONE CASE HAS, THE PROCESS CONSISTS OF SUCCESSIVE STAGES AUTOMATICALLY WASHING AND RINSING. HIGH PERFORMANCE AND POWER WASHING, IN CONJUNCTION WITH A PROFESSIONAL DETERGENT WASHING GUARANTEE RECEIPT OF THE HIGHEST QUALITY CLEANING ITEMS IN THE CONTINUOUS WASHING SYSTEM WITH CLOSED CIRCUIT WASHING AND RINSING, AND TECHNOLOGICAL TRANSFER. THANKS TO THE USE OF HIGH-PRESSURE FANS AND TO OPTIMIZE THE CONSTRUCTION OF DRYING TUNNEL, IT IS POSSIBLE TO ACHIEVE BEST DRYING EFFECTS IN CONTINUOUS MOVEMENT. USING ADDITIONAL REGULATION OF FLOWS IT IS POSSIBLE TO ECONOMICAL SETTING MACHINES FOR MINIMIZE THE CONSUMPTION OF WATER, ENERGY AND DETERGENTS.
Vendedor: Machine-For-Sale.com
Año de construcción: usado
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 3500 x 2000 x 2100 mm<br/>description: according to seller machine was overhauled in 2009, with 2 tool cabinets, 1 x dimensions 750 x 610 x 900 mm, 7 drawers, content of cutting tools, allen keys, 1 x dimensions 710 x 750 x 1700 mm, 18 drawers, content of clamping devices, machine dimensions 2150 x 1100 x 2100 mm,with documentation, max. ram stroke 250 mm, ram adjustment 250 mm, inclined position of ram to front up to 7°, jib length 425 mm, height of table until ram guide 450 mm, table diameter 440 mm, table bore 100 mm, longitudinal movement of table 375 mm, cross movement 350 mm, ram strokes 33 up to 110/min, feed rate of each ram stroke longitudinal 0,08 up to 8 mm, cross 0,07 up to 0,7 mm WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2000 X 2100 MM
DESCRIPTION: ACCORDING TO SELLER MACHINE WAS OVERHAULED IN 2009, WITH 2 TOOL CABINETS, 1 X DIMENSIONS 750 X 610 X 900 MM, 7 DRAWERS, CONTENT OF CUTTING TOOLS, ALLEN KEYS, 1 X DIMENSIONS 710 X 750 X 1700 MM, 18 DRAWERS, CONTENT OF CLAMPING DEVICES, MACHINE DIMENSIONS 2150 X 1100 X 2100 MM,WITH DOCUMENTATION, MAX. RAM STROKE 250 MM, RAM ADJUSTMENT 250 MM, INCLINED POSITION OF RAM TO FRONT UP TO 7°, JIB LENGTH 425 MM, HEIGHT OF TABLE UNTIL RAM GUIDE 450 MM, TABLE DIAMETER 440 MM, TABLE BORE 100 MM, LONGITUDINAL MOVEMENT OF TABLE 375 MM, CROSS MOVEMENT 350 MM, RAM STROKES 33 UP TO 110/MIN, FEED RATE OF EACH RAM STROKE LONGITUDINAL 0,08 UP TO 8 MM, CROSS 0,07 UP TO 0,7 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cutting capacities 
round	260mm
square	260mm x 260mm
blade size	4115mm x 41mm x 1.3mm
blade speeds	variable
material feed stroke (max in one movement)	680mm
main motor	7 hp
dimentions (l x d x h)	1800mm x 1800mm x 2300mm
weight (approx)	2200 kg
feed table size (l x d x h)	3800mm x 1300mm x 1800mm
weight feed table (approx)	400 kg CUTTING CAPACITIES ROUND 260MM SQUARE 260MM X 260MM BLADE SIZE 4115MM X 41MM X 1.3MM BLADE SPEEDS VARIABLE MATERIAL FEED STROKE (MAX IN ONE MOVEMENT) 680MM MAIN MOTOR 7 HP DIMENTIONS (L X D X H) 1800MM X 1800MM X 2300MM WEIGHT (APPROX) 2200 KG FEED TABLE SIZE (L X D X H) 3800MM X 1300MM X 1800MM WEIGHT FEED TABLE (APPROX) 400 KG
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-weight approx.: 5200 kg<br/>dimensions (l x w x h) approx.: 3000 x 2950 x 2550 mm<br/>description: table clamping surface 400 x 1600 mm, max. table load 1600 kg, table movement longitudinal 1170 mm, cross 510 mm, vertical 400 mm, tool holder iso 50 (tgl 7836), max. cutter head diameter 315 mm, 18 main spindle speeds from 45 up to 2240 rpm, feet rates continuously longitudinal and cross 3 up to 2000 mm/min, vertical 1,5 up to 1000 mm/min, rapid traverse longitudinal and cross 10000 mm/min, vertical 5000 mm/min, with point- and linear control heidenhain tnc 131, lateral slewable vertical milling head, counter holder for horizontal milling, machine light, swivel arm for vertical milling head and german documentation for machine and control system, 2 tool cabinets, 1 x with 2 sliding doors, each 1440 x 800 x 1030 mm, each with 7 and 8 drawers WEIGHT APPROX.: 5200 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2950 X 2550 MM
DESCRIPTION: TABLE CLAMPING SURFACE 400 X 1600 MM, MAX. TABLE LOAD 1600 KG, TABLE MOVEMENT LONGITUDINAL 1170 MM, CROSS 510 MM, VERTICAL 400 MM, TOOL HOLDER ISO 50 (TGL 7836), MAX. CUTTER HEAD DIAMETER 315 MM, 18 MAIN SPINDLE SPEEDS FROM 45 UP TO 2240 RPM, FEET RATES CONTINUOUSLY LONGITUDINAL AND CROSS 3 UP TO 2000 MM/MIN, VERTICAL 1,5 UP TO 1000 MM/MIN, RAPID TRAVERSE LONGITUDINAL AND CROSS 10000 MM/MIN, VERTICAL 5000 MM/MIN, WITH POINT- AND LINEAR CONTROL HEIDENHAIN TNC 131, LATERAL SLEWABLE VERTICAL MILLING HEAD, COUNTER HOLDER FOR HORIZONTAL MILLING, MACHINE LIGHT, SWIVEL ARM FOR VERTICAL MILLING HEAD AND GERMAN DOCUMENTATION FOR MACHINE AND CONTROL SYSTEM, 2 TOOL CABINETS, 1 X WITH 2 SLIDING DOORS, EACH 1440 X 800 X 1030 MM, EACH WITH 7 AND 8 DRAWERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-with digital display for lateral axis.
clamping surface of the solid table 195 x 605 mm
table movement along autom. and hand 290/300 mm
table motion vertical machine. and hand 330/340 mm
spindle stock cross movement by hand 150 mm
spindle carrier isa 40
spindle speeds of 40-2000 rpm.
spindle drive 1/1.4 kw
weight approx. 660 kg.
accessories: separate control cabinet. WITH DIGITAL DISPLAY FOR LATERAL AXIS. CLAMPING SURFACE OF THE SOLID TABLE 195 X 605 MM TABLE MOVEMENT ALONG AUTOM. AND HAND 290/300 MM TABLE MOTION VERTICAL MACHINE. AND HAND 330/340 MM SPINDLE STOCK CROSS MOVEMENT BY HAND 150 MM SPINDLE CARRIER ISA 40 SPINDLE SPEEDS OF 40-2000 RPM. SPINDLE DRIVE 1/1.4 KW WEIGHT APPROX. 660 KG. ACCESSORIES: SEPARATE CONTROL CABINET.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 3000 x 1200 x 1600 mm<br/>description: fabrication no. 0298, machine no. uws 30 cz 2 cy, centre height over table 135 mm, distance between centres 480 mm, max. grinding diameter 265 mm, max. grinding length 400 mm, table clamping surface 890 x 130 mm, max. longitudinal movement 400 mm, adjustment cross 220 mm, slewability to 2 sides 90° and 45°, grinding spindle min/max distance between centre of grinding spindle up to upper edge of table 120/350 mm, grinding disc 200 x 80 x 20 mm, with separate tool cabinet 720 x 770 x 1050 mm, without content, euro pallet with special grinding device, further devices, part devices and tool holders as well as large documentation, pallet size 800 x 1200 x 500 mm. for further data, please refer to the copy of the machine card attached as pdf. WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1200 X 1600 MM
DESCRIPTION: FABRICATION NO. 0298, MACHINE NO. UWS 30 CZ 2 CY, CENTRE HEIGHT OVER TABLE 135 MM, DISTANCE BETWEEN CENTRES 480 MM, MAX. GRINDING DIAMETER 265 MM, MAX. GRINDING LENGTH 400 MM, TABLE CLAMPING SURFACE 890 X 130 MM, MAX. LONGITUDINAL MOVEMENT 400 MM, ADJUSTMENT CROSS 220 MM, SLEWABILITY TO 2 SIDES 90° AND 45°, GRINDING SPINDLE MIN/MAX DISTANCE BETWEEN CENTRE OF GRINDING SPINDLE UP TO UPPER EDGE OF TABLE 120/350 MM, GRINDING DISC 200 X 80 X 20 MM, WITH SEPARATE TOOL CABINET 720 X 770 X 1050 MM, WITHOUT CONTENT, EURO PALLET WITH SPECIAL GRINDING DEVICE, FURTHER DEVICES, PART DEVICES AND TOOL HOLDERS AS WELL AS LARGE DOCUMENTATION, PALLET SIZE 800 X 1200 X 500 MM. FOR FURTHER DATA, PLEASE REFER TO THE COPY OF THE MACHINE CARD ATTACHED AS PDF.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-multirip saw at one moving saw cosmec sm 400 lm
power main motor kw 30 (hp 40) (tot installed kw 33)
max thickness of cutting : 140 mm ( suggested up to 120 mm )
min pieces length 550 mm
board passing width 1000 mm
saws diameter 300 - 400 mm
saws hole diameter  70 mm
nr. saws tours 3400 rpm
max external distance between the two saws 360 mm
distance between the column and feeder center 290 mm
feeder width 400 mm
speed of feeder advance 0 - 36 m/min
power motor-reducer advance 2,2 kw
height worktop from groung 830 mm  
 
unit of 1 moving saw activated by pedal

axle drive mounted on ball bearings. the blade movement is carried out by motor. the cut is visualized by optical lasers positioned at the front of the machine, one displaying the position of the fixed blade and the other moving at the same time as the blade movement

machine equipped with entrance roller conveyor with aligning system, unloading mechanization and pieces return MULTIRIP SAW AT ONE MOVING SAW COSMEC SM 400 LM POWER MAIN MOTOR KW 30 (HP 40) (TOT INSTALLED KW 33) MAX THICKNESS OF CUTTING : 140 MM ( SUGGESTED UP TO 120 MM ) MIN PIECES LENGTH 550 MM BOARD PASSING WIDTH 1000 MM SAWS DIAMETER 300 - 400 MM SAWS HOLE DIAMETER 70 MM NR. SAWS TOURS 3400 RPM MAX EXTERNAL DISTANCE BETWEEN THE TWO SAWS 360 MM DISTANCE BETWEEN THE COLUMN AND FEEDER CENTER 290 MM FEEDER WIDTH 400 MM SPEED OF FEEDER ADVANCE 0 - 36 M/MIN POWER MOTOR-REDUCER ADVANCE 2,2 KW HEIGHT WORKTOP FROM GROUNG 830 MM UNIT OF 1 MOVING SAW ACTIVATED BY PEDAL AXLE DRIVE MOUNTED ON BALL BEARINGS. THE BLADE MOVEMENT IS CARRIED OUT BY MOTOR. THE CUT IS VISUALIZED BY OPTICAL LASERS POSITIONED AT THE FRONT OF THE MACHINE, ONE DISPLAYING THE POSITION OF THE FIXED BLADE AND THE OTHER MOVING AT THE SAME TIME AS THE BLADE MOVEMENT MACHINE EQUIPPED WITH ENTRANCE ROLLER CONVEYOR WITH ALIGNING SYSTEM, UNLOADING MECHANIZATION AND PIECES RETURN
Vendedor: Dumbo S.r.l.
Año de construcción: usado
Ubicación: Land-new hot press, hydraulically\r\nbrand: italpresse \r\ntype xl/6 30-13 pe\r\n\r\n- electrical - heating plates: 3000 x 1300 mm \r\n- total pressure: 120 to. \r\n- number of hot plates: 2 pc. \r\n- number of floors: 1 pc. \r\n- stroke: 350 mm \r\n- day light opening: 350 mm \r\n- all-round feeding \r\n- number of cylinders: 6 pc. \r\n- diameter of cylinder: 85 mm \r\n- power consumption (hydraulic unit): 3 kw\r\n- electric hot plates of solid hard aluminium with installed heating elements \r\n- heating power 22 kw \r\n- high pressure isolation plates  \r\n- operating temperature: 90° c. \r\n- max. temperature: 120° c. \r\n- supply: 400v/50 hz \r\n- safety accordance with ce standard \r\n\r\nstandard equipment:\r\n- movement of the press table with rack and pinion parallel guidance at two corners of the press table made from self-lubricating material \r\n- electronic control unit for controlling and monitoring the machine \r\n- digital timer for setting the pressing time and automatic opening \r\n- digital input and monitoring of the pressing pressure \r\n- timer for programming the starting time of heater\r\n- digital display of diagnosis and fault messages \r\n- safety circuit with two-hand control \r\n- emergency strip wire \r\n- safety holder for the lower press table \r\n\r\noptional for an extra charge:\r\n- opening / cylinder stroke 600 mm \r\n- electrical inactivation of the left cylinder bank \r\n- additional charge for ?gold-anodised? heating plates\r\n NEW HOT PRESS, HYDRAULICALLY\R\NBRAND: ITALPRESSE \R\NTYPE XL/6 30-13 PE\R\N\R\N- ELECTRICAL - HEATING PLATES: 3000 X 1300 MM \R\N- TOTAL PRESSURE: 120 TO. \R\N- NUMBER OF HOT PLATES: 2 PC. \R\N- NUMBER OF FLOORS: 1 PC. \R\N- STROKE: 350 MM \R\N- DAY LIGHT OPENING: 350 MM \R\N- ALL-ROUND FEEDING \R\N- NUMBER OF CYLINDERS: 6 PC. \R\N- DIAMETER OF CYLINDER: 85 MM \R\N- POWER CONSUMPTION (HYDRAULIC UNIT): 3 KW\R\N- ELECTRIC HOT PLATES OF SOLID HARD ALUMINIUM WITH INSTALLED HEATING ELEMENTS \R\N- HEATING POWER 22 KW \R\N- HIGH PRESSURE ISOLATION PLATES \R\N- OPERATING TEMPERATURE: 90° C. \R\N- MAX. TEMPERATURE: 120° C. \R\N- SUPPLY: 400V/50 HZ \R\N- SAFETY ACCORDANCE WITH CE STANDARD \R\N\R\NSTANDARD EQUIPMENT:\R\N- MOVEMENT OF THE PRESS TABLE WITH RACK AND PINION PARALLEL GUIDANCE AT TWO CORNERS OF THE PRESS TABLE MADE FROM SELF-LUBRICATING MATERIAL \R\N- ELECTRONIC CONTROL UNIT FOR CONTROLLING AND MONITORING THE MACHINE \R\N- DIGITAL TIMER FOR SETTING THE PRESSING TIME AND AUTOMATIC OPENING \R\N- DIGITAL INPUT AND MONITORING OF THE PRESSING PRESSURE \R\N- TIMER FOR PROGRAMMING THE STARTING TIME OF HEATER\R\N- DIGITAL DISPLAY OF DIAGNOSIS AND FAULT MESSAGES \R\N- SAFETY CIRCUIT WITH TWO-HAND CONTROL \R\N- EMERGENCY STRIP WIRE \R\N- SAFETY HOLDER FOR THE LOWER PRESS TABLE \R\N\R\NOPTIONAL FOR AN EXTRA CHARGE:\R\N- OPENING / CYLINDER STROKE 600 MM \R\N- ELECTRICAL INACTIVATION OF THE LEFT CYLINDER BANK \R\N- ADDITIONAL CHARGE FOR ?GOLD-ANODISED? HEATING PLATES\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-11.0 general description of the basic machine:

1.1 basic machine:
the machine basic frame as well as the travelling column are statically and dynamically as a rigid welded construction.

the central plate of the editing support serves to accommodate of the processing units.
the control cabinet is right on the operator's side.

1.2 management system:
the movement of the axes (x - y - z) is carried out on all sides sealed linear guide systems.

1.3. propulsion system:
all the axes position position-controlled. the axis of movement is through hardened ball screw spindles, and per a brushless three-phase servomotor.

1.4 workpiece clamping:
6 pads are with two large-area vacuum cleaners available for clamping of the workpieces.

1.5 aggregate technique:
a vertical drilling unit, a horizontal boring unit, a pivoting nutsã¤ge and a upper end mill with tool changer are used as processing units.

1.6 electronics:
as a control system, all weeke machining centres are equipped with homatic 2000 system and the easy to use programming software woodwop.

1.7 safety equipment:
a dust - and soundproofing hood, as well as light barrier in the operating area secure the operating staff. rear or side guards are available depending on the requirement.

1.8 extraction:
a suction nozzle mounted centrally on the editing support allows for an easy connection to the central extraction system.

1.9 documentation:
a comprehensive and clear documentation of the machine is enclosed in simple design of the machine.

2.0 technical specification

2.0.1 machine

procedures
x 3350 mm
y axis 1200 mm
z axle 140 mm

work table
length 2750 mm
width 900 mm
document height 90 mm
(the processing amount may vary by the length of the tool)

travel speeds
x-axis 65 m / min
y axis 50 m / min
z axis 15 m / min

2.0.2 workpiece clamping
-4 adjustable in x direction adjustable work-piece supports, pneumatic relaxed - regulations on dust-protected, hardened and ground round management system
-2 copies of the workpiece is firmly fixed (left and right)
-8 programmatic work piece stops
-6 werkstã¼ckeinlegehilfen
-automatic cleaners and pad clamp
-vacuum pump 100 m3/h

2.1 aggregate technique:

1 vertical drilling unit with 18 programmatic spindles

travel range:
x direction 2750 mm with all spindles
y direction 914 mm all spindles
y direction to 1106 mm
-vorlegehub z-direction 40 mm
-drilling depth 38 mm
-direction of rotation left / right
-speed 1/min. 4250
-drive 1.5 kw, 50 hz, helical gears
-recording of drill 10 mm
-drilling diameter of 20 mm (18 spindles)
35 mm (2 shafts with reinforced execution)
-spindle distance 32 mm (16 spindles)
-spindles individually controllable
-arrangement 10 spindles x-direction (holes)
6 spindles y-direction (construction)
2 spindles x-direction (heavy duty)
-extraction central

1 horizontal boring unit with 4 screws (phillips)

travel range:
x direction 2750 mm with all spindles
y direction of 840 mm for the front side drilling
y direction of 710 mm for front drilling
-drilling height z-direction 38 mm
-drilling depth of 38 mm
-direction of rotation right
-speed 6050 rpm.
-drive 1.5 kw, 50 hz
-recording of drill 10 mm
-drilling diameter of 20 mm
-arrangement phillips

1 nutsã¤ge automatically swivel 90 degrees

travel range:

x direction 2750 mm (plus outlet)
y direction 1179 mm (at x position)
1099 mm (at y position)
-depth of cut: z direction 20 mm
-cutting cross-section: max. 60 mm2
-direction of rotation: right
-speed: 5590 u/min
-drive: 1.5 kw, 50 hz
-blade holder: 30 mm
-diameter: 150 mm
-blade thickness: max 8 mm
-rotation: 0 degrees and 90 degrees programmatically
-extraction: central

1 tool change spindles 7.5 kw
with tool change magazine

travel range:
x direction 2750 mm
y direction 1091 mm (minus wz wheel.)
-z direction per tool up to 85 mm (sep. list of tools)
-sleeve: for sk 30 - taper
-tool diameter: 100 mm
-tool weight: 3.5 kg incl. sleeve
-tool collection: automatically
-direction of rotation: right / left programmable
-speed: stepless 1250-18000 u/min programmable
-drive: frequency-controlled three-phase motor
-power: 7,5 kw
-spindle lubrication: grease, permanently lubricated
-cooling: liquid circulation cooling
-security: spindle prompt for sk 30 cone
-extraction: central
-magazine places: 6
-layout: on the right side of the engine (pickup-system)

2.2 general technical data:

machine dimensions:
machine length 4390 mm
machine width 3500 mm
machine height 2100 mm

dimensions:
length 5800 mm
6550 mm min. dimensions
width 3500 mm

connections:

pneumatic:
-compressed air 6 bar, r 1/2 inch with compressed air servicing unit
-air consumption approx. 10 nl

extraction:
-diameter d = 200
-consumption approx. 3400 m3/h
-air velocity 30 m/s
-vacuum 150 mm ws

electrics:
-installation according to the regulations of the vde
-protection class ip 54
-operating voltage 3 400 volts +/-5%,.
frequency 50 hz (this power not be respected, so a constant voltage transformers must be installed at the expense of the buyer.)
-connected load approx. 14 kw
machine weight: approximately 4250 kg
floor load: 200 n/cm2

2.3 control homatic 2000

2.3.1 hardware
industrial multi computer system
cnc path control is equipped with three position-controlled axes (x, y, and z). in the axes x, y, and z can be interpolated simultaneously, with each with 2 axes circular interpolation can be performed. the 3rd can axis as a linear axis are switched on. the integrated
plc takes over the control of all machine functions. all state messages (inputs and outputs) are indicated by leds

industrial pc (ipc)
the standard ipc takes over the tasks of the user guidance. all entries and the programming of the machine are made here to the ipc.
-486 ipc
-8 mb ram memory
-170 mbyte harddisk storage
-3 1/2 inch floppy drive
-serial interface rs 232 for serial data transmission up to 15 m
-free slot for network
14 inch, vga monitor, colour graphics

2.3.2 software
-automatic reference point driving all axes
-tool management with speed control and automatic tool compensation settlement
woodwop 2.5: the workshop-oriented programming system for trades and industry
-8-digit alphanumeric program and under program designation
-options (parameters) programming technology
-icon technology
-fault diagnosis
-block functions and sub-routine techniques with local and global parameters allocation
-zoom functions
-integration of algorithmic formulas in the workpiece programming
-zero offset
-automatic mirroring of the editors
-copying, duplicating and deleting editing types
-locking individual edits through allocation of conditions (and, or, equally, larger, smaller, etc...)
-graphical representation of workpiece the workpiece in 3 levels
-item search function
-bag cycle (circle, slot and rectangular pocket)
-ellipse function (inner - and outer ellipse)
-programming and presentation of the work-piece supports and vacuum cleaner
-optimization of the editor

g. 0001 number: 0036 1 piece
vakuumanschluã? f. templates re. side of the machine
vacuum connection for stencils incl. filter. with this facility, home-made vacuum stencils can be connected to the machine by means of hoses and couplings vacuum circuit.
 11.0 GENERAL DESCRIPTION OF THE BASIC MACHINE: 1.1 BASIC MACHINE: THE MACHINE BASIC FRAME AS WELL AS THE TRAVELLING COLUMN ARE STATICALLY AND DYNAMICALLY AS A RIGID WELDED CONSTRUCTION. THE CENTRAL PLATE OF THE EDITING SUPPORT SERVES TO ACCOMMODATE OF THE PROCESSING UNITS. THE CONTROL CABINET IS RIGHT ON THE OPERATOR'S SIDE. 1.2 MANAGEMENT SYSTEM: THE MOVEMENT OF THE AXES (X - Y - Z) IS CARRIED OUT ON ALL SIDES SEALED LINEAR GUIDE SYSTEMS. 1.3. PROPULSION SYSTEM: ALL THE AXES POSITION POSITION-CONTROLLED. THE AXIS OF MOVEMENT IS THROUGH HARDENED BALL SCREW SPINDLES, AND PER A BRUSHLESS THREE-PHASE SERVOMOTOR. 1.4 WORKPIECE CLAMPING: 6 PADS ARE WITH TWO LARGE-AREA VACUUM CLEANERS AVAILABLE FOR CLAMPING OF THE WORKPIECES. 1.5 AGGREGATE TECHNIQUE: A VERTICAL DRILLING UNIT, A HORIZONTAL BORING UNIT, A PIVOTING NUTS&ATILDE;&CURREN;GE AND A UPPER END MILL WITH TOOL CHANGER ARE USED AS PROCESSING UNITS. 1.6 ELECTRONICS: AS A CONTROL SYSTEM, ALL WEEKE MACHINING CENTRES ARE EQUIPPED WITH HOMATIC 2000 SYSTEM AND THE EASY TO USE PROGRAMMING SOFTWARE WOODWOP. 1.7 SAFETY EQUIPMENT: A DUST - AND SOUNDPROOFING HOOD, AS WELL AS LIGHT BARRIER IN THE OPERATING AREA SECURE THE OPERATING STAFF. REAR OR SIDE GUARDS ARE AVAILABLE DEPENDING ON THE REQUIREMENT. 1.8 EXTRACTION: A SUCTION NOZZLE MOUNTED CENTRALLY ON THE EDITING SUPPORT ALLOWS FOR AN EASY CONNECTION TO THE CENTRAL EXTRACTION SYSTEM. 1.9 DOCUMENTATION: A COMPREHENSIVE AND CLEAR DOCUMENTATION OF THE MACHINE IS ENCLOSED IN SIMPLE DESIGN OF THE MACHINE. 2.0 TECHNICAL SPECIFICATION 2.0.1 MACHINE PROCEDURES X 3350 MM Y AXIS 1200 MM Z AXLE 140 MM WORK TABLE LENGTH 2750 MM WIDTH 900 MM DOCUMENT HEIGHT 90 MM (THE PROCESSING AMOUNT MAY VARY BY THE LENGTH OF THE TOOL) TRAVEL SPEEDS X-AXIS 65 M / MIN Y AXIS 50 M / MIN Z AXIS 15 M / MIN 2.0.2 WORKPIECE CLAMPING -4 ADJUSTABLE IN X DIRECTION ADJUSTABLE WORK-PIECE SUPPORTS, PNEUMATIC RELAXED - REGULATIONS ON DUST-PROTECTED, HARDENED AND GROUND ROUND MANAGEMENT SYSTEM -2 COPIES OF THE WORKPIECE IS FIRMLY FIXED (LEFT AND RIGHT) -8 PROGRAMMATIC WORK PIECE STOPS -6 WERKST&ATILDE;&FRAC14;CKEINLEGEHILFEN -AUTOMATIC CLEANERS AND PAD CLAMP -VACUUM PUMP 100 M3/H 2.1 AGGREGATE TECHNIQUE: 1 VERTICAL DRILLING UNIT WITH 18 PROGRAMMATIC SPINDLES TRAVEL RANGE: X DIRECTION 2750 MM WITH ALL SPINDLES Y DIRECTION 914 MM ALL SPINDLES Y DIRECTION TO 1106 MM -VORLEGEHUB Z-DIRECTION 40 MM -DRILLING DEPTH 38 MM -DIRECTION OF ROTATION LEFT / RIGHT -SPEED 1/MIN. 4250 -DRIVE 1.5 KW, 50 HZ, HELICAL GEARS -RECORDING OF DRILL 10 MM -DRILLING DIAMETER OF 20 MM (18 SPINDLES) 35 MM (2 SHAFTS WITH REINFORCED EXECUTION) -SPINDLE DISTANCE 32 MM (16 SPINDLES) -SPINDLES INDIVIDUALLY CONTROLLABLE -ARRANGEMENT 10 SPINDLES X-DIRECTION (HOLES) 6 SPINDLES Y-DIRECTION (CONSTRUCTION) 2 SPINDLES X-DIRECTION (HEAVY DUTY) -EXTRACTION CENTRAL 1 HORIZONTAL BORING UNIT WITH 4 SCREWS (PHILLIPS) TRAVEL RANGE: X DIRECTION 2750 MM WITH ALL SPINDLES Y DIRECTION OF 840 MM FOR THE FRONT SIDE DRILLING Y DIRECTION OF 710 MM FOR FRONT DRILLING -DRILLING HEIGHT Z-DIRECTION 38 MM -DRILLING DEPTH OF 38 MM -DIRECTION OF ROTATION RIGHT -SPEED 6050 RPM. -DRIVE 1.5 KW, 50 HZ -RECORDING OF DRILL 10 MM -DRILLING DIAMETER OF 20 MM -ARRANGEMENT PHILLIPS 1 NUTS&ATILDE;&CURREN;GE AUTOMATICALLY SWIVEL 90 DEGREES TRAVEL RANGE: X DIRECTION 2750 MM (PLUS OUTLET) Y DIRECTION 1179 MM (AT X POSITION) 1099 MM (AT Y POSITION) -DEPTH OF CUT: Z DIRECTION 20 MM -CUTTING CROSS-SECTION: MAX. 60 MM2 -DIRECTION OF ROTATION: RIGHT -SPEED: 5590 U/MIN -DRIVE: 1.5 KW, 50 HZ -BLADE HOLDER: 30 MM -DIAMETER: 150 MM -BLADE THICKNESS: MAX 8 MM -ROTATION: 0 DEGREES AND 90 DEGREES PROGRAMMATICALLY -EXTRACTION: CENTRAL 1 TOOL CHANGE SPINDLES 7.5 KW WITH TOOL CHANGE MAGAZINE TRAVEL RANGE: X DIRECTION 2750 MM Y DIRECTION 1091 MM (MINUS WZ WHEEL.) -Z DIRECTION PER TOOL UP TO 85 MM (SEP. LIST OF TOOLS) -SLEEVE: FOR SK 30 - TAPER -TOOL DIAMETER: 100 MM -TOOL WEIGHT: 3.5 KG INCL. SLEEVE -TOOL COLLECTION: AUTOMATICALLY -DIRECTION OF ROTATION: RIGHT / LEFT PROGRAMMABLE -SPEED: STEPLESS 1250-18000 U/MIN PROGRAMMABLE -DRIVE: FREQUENCY-CONTROLLED THREE-PHASE MOTOR -POWER: 7,5 KW -SPINDLE LUBRICATION: GREASE, PERMANENTLY LUBRICATED -COOLING: LIQUID CIRCULATION COOLING -SECURITY: SPINDLE PROMPT FOR SK 30 CONE -EXTRACTION: CENTRAL -MAGAZINE PLACES: 6 -LAYOUT: ON THE RIGHT SIDE OF THE ENGINE (PICKUP-SYSTEM) 2.2 GENERAL TECHNICAL DATA: MACHINE DIMENSIONS: MACHINE LENGTH 4390 MM MACHINE WIDTH 3500 MM MACHINE HEIGHT 2100 MM DIMENSIONS: LENGTH 5800 MM 6550 MM MIN. DIMENSIONS WIDTH 3500 MM CONNECTIONS: PNEUMATIC: -COMPRESSED AIR 6 BAR, R 1/2 INCH WITH COMPRESSED AIR SERVICING UNIT -AIR CONSUMPTION APPROX. 10 NL EXTRACTION: -DIAMETER D = 200 -CONSUMPTION APPROX. 3400 M3/H -AIR VELOCITY 30 M/S -VACUUM 150 MM WS ELECTRICS: -INSTALLATION ACCORDING TO THE REGULATIONS OF THE VDE -PROTECTION CLASS IP 54 -OPERATING VOLTAGE 3 400 VOLTS +/-5%,. FREQUENCY 50 HZ (THIS POWER NOT BE RESPECTED, SO A CONSTANT VOLTAGE TRANSFORMERS MUST BE INSTALLED AT THE EXPENSE OF THE BUYER.) -CONNECTED LOAD APPROX. 14 KW MACHINE WEIGHT: APPROXIMATELY 4250 KG FLOOR LOAD: 200 N/CM2 2.3 CONTROL HOMATIC 2000 2.3.1 HARDWARE INDUSTRIAL MULTI COMPUTER SYSTEM CNC PATH CONTROL IS EQUIPPED WITH THREE POSITION-CONTROLLED AXES (X, Y, AND Z). IN THE AXES X, Y, AND Z CAN BE INTERPOLATED SIMULTANEOUSLY, WITH EACH WITH 2 AXES CIRCULAR INTERPOLATION CAN BE PERFORMED. THE 3RD CAN AXIS AS A LINEAR AXIS ARE SWITCHED ON. THE INTEGRATED PLC TAKES OVER THE CONTROL OF ALL MACHINE FUNCTIONS. ALL STATE MESSAGES (INPUTS AND OUTPUTS) ARE INDICATED BY LEDS INDUSTRIAL PC (IPC) THE STANDARD IPC TAKES OVER THE TASKS OF THE USER GUIDANCE. ALL ENTRIES AND THE PROGRAMMING OF THE MACHINE ARE MADE HERE TO THE IPC. -486 IPC -8 MB RAM MEMORY -170 MBYTE HARDDISK STORAGE -3 1/2 INCH FLOPPY DRIVE -SERIAL INTERFACE RS 232 FOR SERIAL DATA TRANSMISSION UP TO 15 M -FREE SLOT FOR NETWORK 14 INCH, VGA MONITOR, COLOUR GRAPHICS 2.3.2 SOFTWARE -AUTOMATIC REFERENCE POINT DRIVING ALL AXES -TOOL MANAGEMENT WITH SPEED CONTROL AND AUTOMATIC TOOL COMPENSATION SETTLEMENT WOODWOP 2.5: THE WORKSHOP-ORIENTED PROGRAMMING SYSTEM FOR TRADES AND INDUSTRY -8-DIGIT ALPHANUMERIC PROGRAM AND UNDER PROGRAM DESIGNATION -OPTIONS (PARAMETERS) PROGRAMMING TECHNOLOGY -ICON TECHNOLOGY -FAULT DIAGNOSIS -BLOCK FUNCTIONS AND SUB-ROUTINE TECHNIQUES WITH LOCAL AND GLOBAL PARAMETERS ALLOCATION -ZOOM FUNCTIONS -INTEGRATION OF ALGORITHMIC FORMULAS IN THE WORKPIECE PROGRAMMING -ZERO OFFSET -AUTOMATIC MIRRORING OF THE EDITORS -COPYING, DUPLICATING AND DELETING EDITING TYPES -LOCKING INDIVIDUAL EDITS THROUGH ALLOCATION OF CONDITIONS (AND, OR, EQUALLY, LARGER, SMALLER, ETC...) -GRAPHICAL REPRESENTATION OF WORKPIECE THE WORKPIECE IN 3 LEVELS -ITEM SEARCH FUNCTION -BAG CYCLE (CIRCLE, SLOT AND RECTANGULAR POCKET) -ELLIPSE FUNCTION (INNER - AND OUTER ELLIPSE) -PROGRAMMING AND PRESENTATION OF THE WORK-PIECE SUPPORTS AND VACUUM CLEANER -OPTIMIZATION OF THE EDITOR G. 0001 NUMBER: 0036 1 PIECE VAKUUMANSCHLU&ATILDE;? F. TEMPLATES RE. SIDE OF THE MACHINE VACUUM CONNECTION FOR STENCILS INCL. FILTER. WITH THIS FACILITY, HOME-MADE VACUUM STENCILS CAN BE CONNECTED TO THE MACHINE BY MEANS OF HOSES AND COUPLINGS VACUUM CIRCUIT.
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 18000 x 3000 x 2000 mm<br/>description: bar straighteners with 3 rolls, bar length max. approx. 6000 mm possible, roll diameter 3 x 300 mm, including gear drive and electric motor, max. bar diameter approx. 20 to 80 mm, speeds at 3° roll inclination 6 to 15 m/min, dimensions of the straightening machine approx. 4500 x 2200 x 1700 mm, 5000 kg, including a bar loading magazine, magazine width approx. 1000 mm, dimensions of the loading magazine approx. 9000 x 2000 x 1200 mm, including bar ejector with tilting movement, including new and overhauled rolls, diameter approx. 350 mm and 2 x 200 mm, ball bearings from skfas new, type 3 x 24026 cc/w 33 and 1 x 51226 WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 18000 X 3000 X 2000 MM
DESCRIPTION: BAR STRAIGHTENERS WITH 3 ROLLS, BAR LENGTH MAX. APPROX. 6000 MM POSSIBLE, ROLL DIAMETER 3 X 300 MM, INCLUDING GEAR DRIVE AND ELECTRIC MOTOR, MAX. BAR DIAMETER APPROX. 20 TO 80 MM, SPEEDS AT 3° ROLL INCLINATION 6 TO 15 M/MIN, DIMENSIONS OF THE STRAIGHTENING MACHINE APPROX. 4500 X 2200 X 1700 MM, 5000 KG, INCLUDING A BAR LOADING MAGAZINE, MAGAZINE WIDTH APPROX. 1000 MM, DIMENSIONS OF THE LOADING MAGAZINE APPROX. 9000 X 2000 X 1200 MM, INCLUDING BAR EJECTOR WITH TILTING MOVEMENT, INCLUDING NEW AND OVERHAULED ROLLS, DIAMETER APPROX. 350 MM AND 2 X 200 MM, BALL BEARINGS FROM SKFAS NEW, TYPE 3 X 24026 CC/W 33 AND 1 X 51226
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-center height: 232mm, max. swing over bed/ support: 485/ 270mm, bed width: 360mm, quill diameter: 70mm, quill stroke: 180mm, spindle diameter: 100mm, spindle bore: 62mm, length: 3800mm, width: 1200mm, height: 1800mm, weight: 2.9t, available after november 2019.  CENTER HEIGHT: 232MM, MAX. SWING OVER BED/ SUPPORT: 485/ 270MM, BED WIDTH: 360MM, QUILL DIAMETER: 70MM, QUILL STROKE: 180MM, SPINDLE DIAMETER: 100MM, SPINDLE BORE: 62MM, LENGTH: 3800MM, WIDTH: 1200MM, HEIGHT: 1800MM, WEIGHT: 2.9T, AVAILABLE AFTER NOVEMBER 2019.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 46.900 €
Ubicación: Land-weight approx.: 12000 kg<br/>dimensions (l x w x h) approx.: 7000 x 2600 x 2100 mm<br/>description: - machine no.: 170<br> - centre height: 550 mm<br> - distance between centres: 3000 mm<br> - max. turning length: 3020 mm<br> - max. swing diameter over bed: 1100 mm<br> - max. swing diameter over cross slide: 730 mm<br> - max. swing diameter at cranking: 1130 mm<br> - length of cranking in front of face plate: 230 mm<br> - max. workpiece weight: 6000 kg<br> - spindle head according to din 55026: size 11<br> - inner taper: 140 (metrical)<br> - spindle diameter at front bearing: 178 mm<br> - spindle nbore: 128 mm<br> - face plate diameter: 1000 mm<br> - max. chuck diameter: 500 mm<br> - max. torque value: 6000 nm<br> - longitudinal stroke of support: 3020 mm<br> - cross stroke: 590 mm<br> - quill taper: mk 6<br> - quill diameter: 140 mm<br> - max. quill stroke (hydraulical): 300 mm<br> - max. tailstock movement (by hand): 3000 mm<br> - with weiler control system<br> - operating voltage: 400 v<br> - control voltage: dc 24 v<br> - connected load: 55 kva<br> - nominal current: 80 a<br> - frequency: 50 hz<br> - main fuses: 100 a<br> - machine is equipped with a three-jaw chuck, one tailstock as well as chip conveyor mayfran, serial no.: p52 04m3099 01<br> - included in delivery is a big lot of machine accessories, consisting of two steady rests - different sizes, several multifix holders as well as tips, spare jaws and different devices.<br> - the machine has to be picked up on 13th or 14th of may 2019 WEIGHT APPROX.: 12000 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 2600 X 2100 MM
DESCRIPTION: - MACHINE NO.: 170
- CENTRE HEIGHT: 550 MM
- DISTANCE BETWEEN CENTRES: 3000 MM
- MAX. TURNING LENGTH: 3020 MM
- MAX. SWING DIAMETER OVER BED: 1100 MM
- MAX. SWING DIAMETER OVER CROSS SLIDE: 730 MM
- MAX. SWING DIAMETER AT CRANKING: 1130 MM
- LENGTH OF CRANKING IN FRONT OF FACE PLATE: 230 MM
- MAX. WORKPIECE WEIGHT: 6000 KG
- SPINDLE HEAD ACCORDING TO DIN 55026: SIZE 11
- INNER TAPER: 140 (METRICAL)
- SPINDLE DIAMETER AT FRONT BEARING: 178 MM
- SPINDLE NBORE: 128 MM
- FACE PLATE DIAMETER: 1000 MM
- MAX. CHUCK DIAMETER: 500 MM
- MAX. TORQUE VALUE: 6000 NM
- LONGITUDINAL STROKE OF SUPPORT: 3020 MM
- CROSS STROKE: 590 MM
- QUILL TAPER: MK 6
- QUILL DIAMETER: 140 MM
- MAX. QUILL STROKE (HYDRAULICAL): 300 MM
- MAX. TAILSTOCK MOVEMENT (BY HAND): 3000 MM
- WITH WEILER CONTROL SYSTEM
- OPERATING VOLTAGE: 400 V
- CONTROL VOLTAGE: DC 24 V
- CONNECTED LOAD: 55 KVA
- NOMINAL CURRENT: 80 A
- FREQUENCY: 50 HZ
- MAIN FUSES: 100 A
- MACHINE IS EQUIPPED WITH A THREE-JAW CHUCK, ONE TAILSTOCK AS WELL AS CHIP CONVEYOR MAYFRAN, SERIAL NO.: P52 04M3099 01
- INCLUDED IN DELIVERY IS A BIG LOT OF MACHINE ACCESSORIES, CONSISTING OF TWO STEADY RESTS - DIFFERENT SIZES, SEVERAL MULTIFIX HOLDERS AS WELL AS TIPS, SPARE JAWS AND DIFFERENT DEVICES.
- THE MACHINE HAS TO BE PICKED UP ON 13TH OR 14TH OF MAY 2019
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-facilities
-hot melt glue gluing part a20 for rolls
up to 3 mm and strip material up to 20 mm
-hl83 facet/straight unit
-extension running 500 mm
-workpiece support in a scissor version,
extendable up to 1000 mm
-autom. adjustment of the pressure zone
-pneum.. adjustment cap motor
-pneum.. adjustment of chamfer/straight
-milling unit 1.5 kw
-pneum.. adjustment before milling unit
-contour trimming unit fk 11 manual
i-wechelkopfsatz for profile milling
slide bevel cutter set for fk11 20 degrees (1st movement)
slide radius cutter set for fk11 r2 (2nd movement)
-for plasters in direction profile
-pneum.. adjustment for cleaning
-for plasters in direction glue joint
-use control glue grout scraper
-buffing unit up and down
-electr. height adjustment

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-pneumatic connection 7-8 bar FACILITIES -HOT MELT GLUE GLUING PART A20 FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -HL83 FACET/STRAIGHT UNIT -EXTENSION RUNNING 500 MM -WORKPIECE SUPPORT IN A SCISSOR VERSION, EXTENDABLE UP TO 1000 MM -AUTOM. ADJUSTMENT OF THE PRESSURE ZONE -PNEUM.. ADJUSTMENT CAP MOTOR -PNEUM.. ADJUSTMENT OF CHAMFER/STRAIGHT -MILLING UNIT 1.5 KW -PNEUM.. ADJUSTMENT BEFORE MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL I-WECHELKOPFSATZ FOR PROFILE MILLING SLIDE BEVEL CUTTER SET FOR FK11 20 DEGREES (1ST MOVEMENT) SLIDE RADIUS CUTTER SET FOR FK11 R2 (2ND MOVEMENT) -FOR PLASTERS IN DIRECTION PROFILE -PNEUM.. ADJUSTMENT FOR CLEANING -FOR PLASTERS IN DIRECTION GLUE JOINT -USE CONTROL GLUE GROUT SCRAPER -BUFFING UNIT UP AND DOWN -ELECTR. HEIGHT ADJUSTMENT TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -PNEUMATIC CONNECTION 7-8 BAR
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 1.200 €
Ubicación: Land-weight approx.: 850 kg<br/>dimensions (l x w x h) approx.: 1300 x 1100 x 2100 mm<br/>description: serial number 2102-2588, speed range 40 to 2000 rpm, tool holder iso 40, feed range steplessly adjustable from 5 to 500 mm/min, rapid traverse 1200 mm/min, longitudinal table movement motor-driven/manual 290/300 mm, headstock cross movement motor-driven/manual 150/160 mm, support vertical movement motor-driven/manual 330/340 mm, clamping surface approx. 600 x 210 mm, including 4 t-slots width approx. 16 mm, distance between the slots approx. 34 mm, 1 heidenhain-cnc control with digital readout, 1 tool cabinet with 2 drawers and 1 pull-out drawer, contents: various tool holders, accessories for machines and miscellaneous WEIGHT APPROX.: 850 KG
DIMENSIONS (L X W X H) APPROX.: 1300 X 1100 X 2100 MM
DESCRIPTION: SERIAL NUMBER 2102-2588, SPEED RANGE 40 TO 2000 RPM, TOOL HOLDER ISO 40, FEED RANGE STEPLESSLY ADJUSTABLE FROM 5 TO 500 MM/MIN, RAPID TRAVERSE 1200 MM/MIN, LONGITUDINAL TABLE MOVEMENT MOTOR-DRIVEN/MANUAL 290/300 MM, HEADSTOCK CROSS MOVEMENT MOTOR-DRIVEN/MANUAL 150/160 MM, SUPPORT VERTICAL MOVEMENT MOTOR-DRIVEN/MANUAL 330/340 MM, CLAMPING SURFACE APPROX. 600 X 210 MM, INCLUDING 4 T-SLOTS WIDTH APPROX. 16 MM, DISTANCE BETWEEN THE SLOTS APPROX. 34 MM, 1 HEIDENHAIN-CNC CONTROL WITH DIGITAL READOUT, 1 TOOL CABINET WITH 2 DRAWERS AND 1 PULL-OUT DRAWER, CONTENTS: VARIOUS TOOL HOLDERS, ACCESSORIES FOR MACHINES AND MISCELLANEOUS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-retrofitted in 1998 and revised in 2012 by sirmu

technical datas:

stroke: 2000 mm
inclination of the platform: 0-60 â°
rotation: 360â°
table diameter: 4.500 mm
maximum table load: 50,000 kg
plate diameter: 2.250 mm
movement 4 stages
  1 28 mm / min
  2 100 mm / min 3 280 mm / min
  4 560 mm / min tilting of the table: 0-60 â°
4 stages 2 0.7 â° / min
3 2 â° / min
4 4 â° / min
5 7 â° / min

rotation of the table 4 stages
1 270 mm / min
referring to a diameter of 3,500 mm 2 890 mm / min
3 2,700 mm / min
4 5,400 mm / min

total weight: 90,000 kg

RETROFITTED IN 1998 AND REVISED IN 2012 BY SIRMU TECHNICAL DATAS: STROKE: 2000 MM INCLINATION OF THE PLATFORM: 0-60 &ACIRC;&DEG; ROTATION: 360&ACIRC;&DEG; TABLE DIAMETER: 4.500 MM MAXIMUM TABLE LOAD: 50,000 KG PLATE DIAMETER: 2.250 MM MOVEMENT 4 STAGES 1 28 MM / MIN 2 100 MM / MIN 3 280 MM / MIN 4 560 MM / MIN TILTING OF THE TABLE: 0-60 &ACIRC;&DEG; 4 STAGES 2 0.7 &ACIRC;&DEG; / MIN 3 2 &ACIRC;&DEG; / MIN 4 4 &ACIRC;&DEG; / MIN 5 7 &ACIRC;&DEG; / MIN ROTATION OF THE TABLE 4 STAGES 1 270 MM / MIN REFERRING TO A DIAMETER OF 3,500 MM 2 890 MM / MIN 3 2,700 MM / MIN 4 5,400 MM / MIN TOTAL WEIGHT: 90,000 KG
Vendedor: HILGERT AG
Año de construcción: usado
Precio: used machinery auction RESALE 15.000 €
Ubicación: Land-weight approx.: 12640 kg<br/>dimensions (l x w x h) approx.: 14800 x 12750 x 2800 mm<br/>description: panel saw homag<br> max. table dimensions: 3660 x 1220 mm. min. table dimensions: 1800 x 120 mm.<br> máx. cutting capacity: 1600 x 4300 mm.<br> cutting feed: 1 to 150 m/min.<br> main motor power: 13,5 kw.<br> air compressed: 6 bar.<br> <br> handling robot berriak<br> transfer bogey for lateral and vertical movements.<br> max. dimensions workpiece: 1200 x 3800 x 50mm. min. dimensions workpiece: 240 x 2400 x 10 mm.<br> tranfer motor power: 5,5 kw.<br> <br> roller transfer included. dimensions: 4500 x 1000 x 250 mm. work speed: 5m/min. motor power: 0,75 cv. WEIGHT APPROX.: 12640 KG
DIMENSIONS (L X W X H) APPROX.: 14800 X 12750 X 2800 MM
DESCRIPTION: PANEL SAW HOMAG
MAX. TABLE DIMENSIONS: 3660 X 1220 MM. MIN. TABLE DIMENSIONS: 1800 X 120 MM.
MáX. CUTTING CAPACITY: 1600 X 4300 MM.
CUTTING FEED: 1 TO 150 M/MIN.
MAIN MOTOR POWER: 13,5 KW.
AIR COMPRESSED: 6 BAR.

HANDLING ROBOT BERRIAK
TRANSFER BOGEY FOR LATERAL AND VERTICAL MOVEMENTS.
MAX. DIMENSIONS WORKPIECE: 1200 X 3800 X 50MM. MIN. DIMENSIONS WORKPIECE: 240 X 2400 X 10 MM.
TRANFER MOTOR POWER: 5,5 KW.

ROLLER TRANSFER INCLUDED. DIMENSIONS: 4500 X 1000 X 250 MM. WORK SPEED: 5M/MIN. MOTOR POWER: 0,75 CV.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-f 45 evodrive
in basic equipment
equipment package 2
-power 5,5 kw (7,5 hp) with three speeds 3/4/5 000 rpm, manual
adjustable
-angle guide fence (wga) with length compensation and digit l
-cnc rip fence, cutting width 1 000 mm
-original holder
advanced cutting height unilateral rotation, only in connection with at least 5.5 kw
(7,5 hp) drive performance
power 5,5 kw (7,5 hp) with vario (infinitely variable speed control, 2 000 -
6 000 rpm), single-sided wheel
3-axis - ritz unit (ra pido plus): with electromotive height, side and
furrow-width adjustment, including blade, ritzer sheet height with programmable
quick reduction and quick increase, blade width display, drive motor
0.75 of kw (1 hp) at 8 200 rpm upgrades only on machines with preparation for
before scoring unit. for single-sided wheel
led lighting: with particularly energy-efficient led technology, it is
danger zone of the scoring marks clearly visible.
double trolleys: the old village double trolley is famous for its
freedom of movement and the precise rotation. hold the large castors
superstructure in connection to the carrier absolutely exactly in the respective
guide rods. the car is easy with little force in motion
bring up and running safely as if on rails. this running quality is even at
maintain decades of pollution and pollution. length 3 200 mm.
on / off switch on the double trolley
cnc angle stop un 90
cnc fence, cutting width 1 300 mm F 45 EVODRIVE IN BASIC EQUIPMENT EQUIPMENT PACKAGE 2 -POWER 5,5 KW (7,5 HP) WITH THREE SPEEDS 3/4/5 000 RPM, MANUAL ADJUSTABLE -ANGLE GUIDE FENCE (WGA) WITH LENGTH COMPENSATION AND DIGIT L -CNC RIP FENCE, CUTTING WIDTH 1 000 MM -ORIGINAL HOLDER ADVANCED CUTTING HEIGHT UNILATERAL ROTATION, ONLY IN CONNECTION WITH AT LEAST 5.5 KW (7,5 HP) DRIVE PERFORMANCE POWER 5,5 KW (7,5 HP) WITH VARIO (INFINITELY VARIABLE SPEED CONTROL, 2 000 - 6 000 RPM), SINGLE-SIDED WHEEL 3-AXIS - RITZ UNIT (RA PIDO PLUS): WITH ELECTROMOTIVE HEIGHT, SIDE AND FURROW-WIDTH ADJUSTMENT, INCLUDING BLADE, RITZER SHEET HEIGHT WITH PROGRAMMABLE QUICK REDUCTION AND QUICK INCREASE, BLADE WIDTH DISPLAY, DRIVE MOTOR 0.75 OF KW (1 HP) AT 8 200 RPM UPGRADES ONLY ON MACHINES WITH PREPARATION FOR BEFORE SCORING UNIT. FOR SINGLE-SIDED WHEEL LED LIGHTING: WITH PARTICULARLY ENERGY-EFFICIENT LED TECHNOLOGY, IT IS DANGER ZONE OF THE SCORING MARKS CLEARLY VISIBLE. DOUBLE TROLLEYS: THE OLD VILLAGE DOUBLE TROLLEY IS FAMOUS FOR ITS FREEDOM OF MOVEMENT AND THE PRECISE ROTATION. HOLD THE LARGE CASTORS SUPERSTRUCTURE IN CONNECTION TO THE CARRIER ABSOLUTELY EXACTLY IN THE RESPECTIVE GUIDE RODS. THE CAR IS EASY WITH LITTLE FORCE IN MOTION BRING UP AND RUNNING SAFELY AS IF ON RAILS. THIS RUNNING QUALITY IS EVEN AT MAINTAIN DECADES OF POLLUTION AND POLLUTION. LENGTH 3 200 MM. ON / OFF SWITCH ON THE DOUBLE TROLLEY CNC ANGLE STOP UN 90 CNC FENCE, CUTTING WIDTH 1 300 MM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 40.000 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 5700 x 3300 x 3000 mm<br/>description: machine suitable for the palletizing of cartons or cases in layers at crossed planes and not with processing from the bottom. solid and sturdy portal framework in painted steel. horizontal and vertical movements of the machine controlled by inverter for precise and soft starts and stops. pneumo-mechanical contrast system positioned on the transport of the cartons arriving in a position need being turned.<br> <br> motorized transport on board of the machine where the configuration of the layers in made row by row with the possibility of creating, if necessary, spaces through the step by step system.<br> <br> the descent and lifting movements of the gripping head are guided and solidly stabilized by devices on the side of the chariot equipped with rollers sliding on wide-section guides of hardened steel, fixed inside the columns building the main framework of the machine. the palletizing head is equipped with adjustable compactors for the squaring of every single layer before and during the laying-down. touch screen for the creation and modification of palletizing program directly from the machine.<br> <br> model suitable for lines with capacities up to 1.200 cartons/hour. WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 5700 X 3300 X 3000 MM
DESCRIPTION: MACHINE SUITABLE FOR THE PALLETIZING OF CARTONS OR CASES IN LAYERS AT CROSSED PLANES AND NOT WITH PROCESSING FROM THE BOTTOM. SOLID AND STURDY PORTAL FRAMEWORK IN PAINTED STEEL. HORIZONTAL AND VERTICAL MOVEMENTS OF THE MACHINE CONTROLLED BY INVERTER FOR PRECISE AND SOFT STARTS AND STOPS. PNEUMO-MECHANICAL CONTRAST SYSTEM POSITIONED ON THE TRANSPORT OF THE CARTONS ARRIVING IN A POSITION NEED BEING TURNED.

MOTORIZED TRANSPORT ON BOARD OF THE MACHINE WHERE THE CONFIGURATION OF THE LAYERS IN MADE ROW BY ROW WITH THE POSSIBILITY OF CREATING, IF NECESSARY, SPACES THROUGH THE STEP BY STEP SYSTEM.

THE DESCENT AND LIFTING MOVEMENTS OF THE GRIPPING HEAD ARE GUIDED AND SOLIDLY STABILIZED BY DEVICES ON THE SIDE OF THE CHARIOT EQUIPPED WITH ROLLERS SLIDING ON WIDE-SECTION GUIDES OF HARDENED STEEL, FIXED INSIDE THE COLUMNS BUILDING THE MAIN FRAMEWORK OF THE MACHINE. THE PALLETIZING HEAD IS EQUIPPED WITH ADJUSTABLE COMPACTORS FOR THE SQUARING OF EVERY SINGLE LAYER BEFORE AND DURING THE LAYING-DOWN. TOUCH SCREEN FOR THE CREATION AND MODIFICATION OF PALLETIZING PROGRAM DIRECTLY FROM THE MACHINE.

MODEL SUITABLE FOR LINES WITH CAPACITIES UP TO 1.200 CARTONS/HOUR.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gas turbine
manufacturer: bbc
setting into operation: 10/1974
hours of operation: 2733
normal startup: approx. 2800 (2742-13.09.2011)
quickstart: approx. 19
turbinenein - and outlet temperature: 13.0 445,0 gas amount: 3800 m â³/h
gas pressure: 13.8 bar
water injection: 6.6 m â³/h
water pressure: 50 bar
generator gas turbine
performance: 63.7 mw / 3000 rpm
power: 3515 a
voltage: 10.7 k.
revisions per year by the the company alstom power service gmbh until november 2012 detectable.
repair bucket damage 16.06.2009 amounting to â?¬5.368.239,24
implementation a - inspection 2012 amounting to â?¬18.147,50
shovel carrier
gt levels: 3,4,5
new delivery turbine running series: 2
repair heating housing / u: 09/2011
 GAS TURBINE MANUFACTURER: BBC SETTING INTO OPERATION: 10/1974 HOURS OF OPERATION: 2733 NORMAL STARTUP: APPROX. 2800 (2742-13.09.2011) QUICKSTART: APPROX. 19 TURBINENEIN - AND OUTLET TEMPERATURE: 13.0 445,0 GAS AMOUNT: 3800 M &ACIRC;&SUP3;/H GAS PRESSURE: 13.8 BAR WATER INJECTION: 6.6 M &ACIRC;&SUP3;/H WATER PRESSURE: 50 BAR GENERATOR GAS TURBINE PERFORMANCE: 63.7 MW / 3000 RPM POWER: 3515 A VOLTAGE: 10.7 K. REVISIONS PER YEAR BY THE THE COMPANY ALSTOM POWER SERVICE GMBH UNTIL NOVEMBER 2012 DETECTABLE. REPAIR BUCKET DAMAGE 16.06.2009 AMOUNTING TO &ACIRC;?&NOT;5.368.239,24 IMPLEMENTATION A - INSPECTION 2012 AMOUNTING TO &ACIRC;?&NOT;18.147,50 SHOVEL CARRIER GT LEVELS: 3,4,5 NEW DELIVERY TURBINE RUNNING SERIES: 2 REPAIR HEATING HOUSING / U: 09/2011
Vendedor: Christoph Sattler
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 1450 x 1400 x 1350 mm<br/>description: ? horizontal chisel mortiser<br> ? table size 1000 x 310 mm<br> ? table longitudinal travel 400 mm<br> ? maximum head travel approx. 150 mm<br> ? working depth max. approx. 130 mm<br> ? height max. adjustment approx. 100 mm<br> ? head motor 2.20 kw<br> ? hydraulic pump motor 0.75 kw<br> ? automatic and manual mode with movements by a joystick WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 1450 X 1400 X 1350 MM
DESCRIPTION: ? HORIZONTAL CHISEL MORTISER
? TABLE SIZE 1000 X 310 MM
? TABLE LONGITUDINAL TRAVEL 400 MM
? MAXIMUM HEAD TRAVEL APPROX. 150 MM
? WORKING DEPTH MAX. APPROX. 130 MM
? HEIGHT MAX. ADJUSTMENT APPROX. 100 MM
? HEAD MOTOR 2.20 KW
? HYDRAULIC PUMP MOTOR 0.75 KW
? AUTOMATIC AND MANUAL MODE WITH MOVEMENTS BY A JOYSTICK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-300 tons tie-bar-less imm built in 2008 with cc 200 control, integrated engel robot erc 33/2-f, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. plastizising screw bimetalic.

description

   	
technical details	
daylight max	1.300 mm
min. mould hight	400 mm
year of building	2008
working hours	73506
injection pressure	1.616/2.053 bar
injection volumen	511 cm3
nominal capacity of pump motor	45 kw
travel opening	900 mm
screw diameter	55 mm
platen size	1.100 x 1.000 mm
clamping force	3.000 kn 300 TONS TIE-BAR-LESS IMM BUILT IN 2008 WITH CC 200 CONTROL, INTEGRATED ENGEL ROBOT ERC 33/2-F, CRANE FOR MOULD FIXING (2TONS), 16 HOT CHANEL, ACCUMULATOR FOR FAST INJECTION AND PARALLEL MOVEMENTS. 2 CORE PULLER FIX PLATEN, FLOW METER, TRANSPORT BELT. PLASTIZISING SCREW BIMETALIC. DESCRIPTION TECHNICAL DETAILS DAYLIGHT MAX 1.300 MM MIN. MOULD HIGHT 400 MM YEAR OF BUILDING 2008 WORKING HOURS 73506 INJECTION PRESSURE 1.616/2.053 BAR INJECTION VOLUMEN 511 CM3 NOMINAL CAPACITY OF PUMP MOTOR 45 KW TRAVEL OPENING 900 MM SCREW DIAMETER 55 MM PLATEN SIZE 1.100 X 1.000 MM CLAMPING FORCE 3.000 KN
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Precio: used machinery auction RESALE 5.400 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 6800 x 7600 x 2300 mm<br/>description: max. panel length 2500 mm panel stack station no. stations 2 station unloading panel stack ejection panel stack ejection with motorised roller table movement system with frame system suction cups control system homatic nc 21 safety standard ce mark yes WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 6800 X 7600 X 2300 MM
DESCRIPTION: MAX. PANEL LENGTH 2500 MM PANEL STACK STATION NO. STATIONS 2 STATION UNLOADING PANEL STACK EJECTION PANEL STACK EJECTION WITH MOTORISED ROLLER TABLE MOVEMENT SYSTEM WITH FRAME SYSTEM SUCTION CUPS CONTROL SYSTEM HOMATIC NC 21 SAFETY STANDARD CE MARK YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-description:
machine allowing the positioning of the various ingredients and their plug-in.
number of foods can be considered such as meat, fish, vegetables, fruit and other processed products.
the ingredients are prepared, potentially cut and positioned manually into a custom footprint. the plug-in is automatic.

the study of the footprint is customized: it is specific to your machine.

benefits:
manufactured skewers are identical to those made hands.
adjustable rate.
ergonomics of station optimizing the gestures and movements of operators.
easy to clean design taking into account the constraints of food-related.
a touch screen facilitates the man/machine communication with a very intuitive interface equipped with troubleshooting assistance.

technical features:
maximum productivity of the machine: 1200 cycles/hour or 1200 skewers/hour. the number of operators defines the length of the loading of the ingredients area.
the length of the loading area is variable depending on the complexity of the skewer and the number of ingredients.

battery life: 4 hours (storage of approximately 5000 dives)
energy: electric control and pneumatic power
materials: stainless steel and polymers DESCRIPTION: MACHINE ALLOWING THE POSITIONING OF THE VARIOUS INGREDIENTS AND THEIR PLUG-IN. NUMBER OF FOODS CAN BE CONSIDERED SUCH AS MEAT, FISH, VEGETABLES, FRUIT AND OTHER PROCESSED PRODUCTS. THE INGREDIENTS ARE PREPARED, POTENTIALLY CUT AND POSITIONED MANUALLY INTO A CUSTOM FOOTPRINT. THE PLUG-IN IS AUTOMATIC. THE STUDY OF THE FOOTPRINT IS CUSTOMIZED: IT IS SPECIFIC TO YOUR MACHINE. BENEFITS: MANUFACTURED SKEWERS ARE IDENTICAL TO THOSE MADE HANDS. ADJUSTABLE RATE. ERGONOMICS OF STATION OPTIMIZING THE GESTURES AND MOVEMENTS OF OPERATORS. EASY TO CLEAN DESIGN TAKING INTO ACCOUNT THE CONSTRAINTS OF FOOD-RELATED. A TOUCH SCREEN FACILITATES THE MAN/MACHINE COMMUNICATION WITH A VERY INTUITIVE INTERFACE EQUIPPED WITH TROUBLESHOOTING ASSISTANCE. TECHNICAL FEATURES: MAXIMUM PRODUCTIVITY OF THE MACHINE: 1200 CYCLES/HOUR OR 1200 SKEWERS/HOUR. THE NUMBER OF OPERATORS DEFINES THE LENGTH OF THE LOADING OF THE INGREDIENTS AREA. THE LENGTH OF THE LOADING AREA IS VARIABLE DEPENDING ON THE COMPLEXITY OF THE SKEWER AND THE NUMBER OF INGREDIENTS. BATTERY LIFE: 4 HOURS (STORAGE OF APPROXIMATELY 5000 DIVES) ENERGY: ELECTRIC CONTROL AND PNEUMATIC POWER MATERIALS: STAINLESS STEEL AND POLYMERS
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 4100 x 1100 x 1350 mm<br/>description: ? milling machine for window shutter grooves, shutter slot mortiser<br> ? serial number 884603<br> ? pneumatic drive movements<br> ? maximum length of the mortises approx. 100 mm<br> ? maximum depth of the mortises approx. 25 mm<br> ? for more details see the photos WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 4100 X 1100 X 1350 MM
DESCRIPTION: ? MILLING MACHINE FOR WINDOW SHUTTER GROOVES, SHUTTER SLOT MORTISER
? SERIAL NUMBER 884603
? PNEUMATIC DRIVE MOVEMENTS
? MAXIMUM LENGTH OF THE MORTISES APPROX. 100 MM
? MAXIMUM DEPTH OF THE MORTISES APPROX. 25 MM
? FOR MORE DETAILS SEE THE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-description:
in addition to the skewers (eab01, elb01) machine and charger with pikes kap, the line is composed of a set: positions of online preparation of different length based on the number of operators to the loading of molds.

each operator has one or more layers of ingredients. the last operator controls the filling of the mold and possibly its weight (the ability to have a weigh end-of-line station).

the kap machine allows loading in automatic door-spades before their provision on a filled mold and with its lid.
 all pan/lid/door-spades is transferred using conveyors and a lift to the level of the loading of the machine eab01/elb01 station.

end of the cycle, the operator transfers the mold to the demoulding station, stores the empty door spades and the cover near the machine.
 the skewers are mould, the empty mold is arranged on the conveyors ensuring their return to the picking stations.

benefits:
emsens production lines have an easy to clean a design taking into account the constraints of food-related.
emsens production lines are optimized on the ergonomics of station plan to limit movements and repetitive movements of the operators.

emsens offers solutions with conveyors motorized modular belt which may include options of ergonomics such as the angular predisposition of mussels filling, the intermediate pressings...
we also offer transfers by non-motorized roller conveyor, requiring a push, or playing on the slope of the elements.

technical features:
productivity: depends on the number of operators, the organization of the line, the number of tools and the characteristics of the manufactured kebab. DESCRIPTION: IN ADDITION TO THE SKEWERS (EAB01, ELB01) MACHINE AND CHARGER WITH PIKES KAP, THE LINE IS COMPOSED OF A SET: POSITIONS OF ONLINE PREPARATION OF DIFFERENT LENGTH BASED ON THE NUMBER OF OPERATORS TO THE LOADING OF MOLDS. EACH OPERATOR HAS ONE OR MORE LAYERS OF INGREDIENTS. THE LAST OPERATOR CONTROLS THE FILLING OF THE MOLD AND POSSIBLY ITS WEIGHT (THE ABILITY TO HAVE A WEIGH END-OF-LINE STATION). THE KAP MACHINE ALLOWS LOADING IN AUTOMATIC DOOR-SPADES BEFORE THEIR PROVISION ON A FILLED MOLD AND WITH ITS LID. ALL PAN/LID/DOOR-SPADES IS TRANSFERRED USING CONVEYORS AND A LIFT TO THE LEVEL OF THE LOADING OF THE MACHINE EAB01/ELB01 STATION. END OF THE CYCLE, THE OPERATOR TRANSFERS THE MOLD TO THE DEMOULDING STATION, STORES THE EMPTY DOOR SPADES AND THE COVER NEAR THE MACHINE. THE SKEWERS ARE MOULD, THE EMPTY MOLD IS ARRANGED ON THE CONVEYORS ENSURING THEIR RETURN TO THE PICKING STATIONS. BENEFITS: EMSENS PRODUCTION LINES HAVE AN EASY TO CLEAN A DESIGN TAKING INTO ACCOUNT THE CONSTRAINTS OF FOOD-RELATED. EMSENS PRODUCTION LINES ARE OPTIMIZED ON THE ERGONOMICS OF STATION PLAN TO LIMIT MOVEMENTS AND REPETITIVE MOVEMENTS OF THE OPERATORS. EMSENS OFFERS SOLUTIONS WITH CONVEYORS MOTORIZED MODULAR BELT WHICH MAY INCLUDE OPTIONS OF ERGONOMICS SUCH AS THE ANGULAR PREDISPOSITION OF MUSSELS FILLING, THE INTERMEDIATE PRESSINGS... WE ALSO OFFER TRANSFERS BY NON-MOTORIZED ROLLER CONVEYOR, REQUIRING A PUSH, OR PLAYING ON THE SLOPE OF THE ELEMENTS. TECHNICAL FEATURES: PRODUCTIVITY: DEPENDS ON THE NUMBER OF OPERATORS, THE ORGANIZATION OF THE LINE, THE NUMBER OF TOOLS AND THE CHARACTERISTICS OF THE MANUFACTURED KEBAB.
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 1450 x 1450 x 1350 mm<br/>description: ? horizontal chisel mortiser<br> ? serial number 900602<br> ? table size 1000 x 280 mm<br> ? table longitudinal travel 400 mm<br> ? maximum head travel approx. 150 mm<br> ? working depth max. approx. 130 mm<br> ? height max. adjustment approx. 100 mm<br> ? head motor 2.20 kw<br> ? hydraulic pump motor 0.75 kw<br> ? automatic and manual mode with movements by a joystick WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 1450 X 1450 X 1350 MM
DESCRIPTION: ? HORIZONTAL CHISEL MORTISER
? SERIAL NUMBER 900602
? TABLE SIZE 1000 X 280 MM
? TABLE LONGITUDINAL TRAVEL 400 MM
? MAXIMUM HEAD TRAVEL APPROX. 150 MM
? WORKING DEPTH MAX. APPROX. 130 MM
? HEIGHT MAX. ADJUSTMENT APPROX. 100 MM
? HEAD MOTOR 2.20 KW
? HYDRAULIC PUMP MOTOR 0.75 KW
? AUTOMATIC AND MANUAL MODE WITH MOVEMENTS BY A JOYSTICK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-hedelius machining centre cb 60 3-axis machine with 4 axes control - built in 1999
numerical control heidenhain tnc 426
22.0 kw main spindle drive 30-6000 min-1
november 2018 usage new spindle
30-fach tool magazine iso 40
fixed machine table
traverse paths: x axis: 2100 mm
y-axis: 620 mm
z-axis: 520 mm
reciprocating motion: 800 x 620 mm
spindle &gt; &lt; table: 140-660 mm
operation handset 410/426/430
spindle speed 8000
torque 50-100
scratch band promotion 60 x 2100
internal coolant supply / ikz
-central coolant supply through the work spindle
-complete with separately-standing band filter system & additional
duplex filter
pistols abblas
working space partition 60
 HEDELIUS MACHINING CENTRE CB 60 3-AXIS MACHINE WITH 4 AXES CONTROL - BUILT IN 1999 NUMERICAL CONTROL HEIDENHAIN TNC 426 22.0 KW MAIN SPINDLE DRIVE 30-6000 MIN-1 NOVEMBER 2018 USAGE NEW SPINDLE 30-FACH TOOL MAGAZINE ISO 40 FIXED MACHINE TABLE TRAVERSE PATHS: X AXIS: 2100 MM Y-AXIS: 620 MM Z-AXIS: 520 MM RECIPROCATING MOTION: 800 X 620 MM SPINDLE &GT; &LT; TABLE: 140-660 MM OPERATION HANDSET 410/426/430 SPINDLE SPEED 8000 TORQUE 50-100 SCRATCH BAND PROMOTION 60 X 2100 INTERNAL COOLANT SUPPLY / IKZ -CENTRAL COOLANT SUPPLY THROUGH THE WORK SPINDLE -COMPLETE WITH SEPARATELY-STANDING BAND FILTER SYSTEM & ADDITIONAL DUPLEX FILTER PISTOLS ABBLAS WORKING SPACE PARTITION 60
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 5000 x 1500 x 2550 mm<br/>description: work capacity 16 cicli/min, lifting capacity 300 kg, arm extension 3140 mm, no. axes 4, movement system with frame system collet, safety standard ce mark, rollers not included WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 1500 X 2550 MM
DESCRIPTION: WORK CAPACITY 16 CICLI/MIN, LIFTING CAPACITY 300 KG, ARM EXTENSION 3140 MM, NO. AXES 4, MOVEMENT SYSTEM WITH FRAME SYSTEM COLLET, SAFETY STANDARD CE MARK, ROLLERS NOT INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-year of manufacture 2010
-production of polish

technical parameters:

-grinding width 300 mm
-height grinding 120 mm

-adjustable head speed on the inverter
-adjustable feed speed on the inverter
-three heads

-top head 0.75 kw
-head lower 0.75 kw
head of law 0.37 kw
-feed engine 0.37 kw

-full adjustment heads
– the seven bottom rollers
-five rows of the upper rollers
-nozzle diameter 3 x 100 mm

overall dimensions of the machine:
-length of 200 cm
width 110 cm
-height 155 cm
-weight of ~ 300 kg

grinders shaped l-series are designed for grinding surfaces of wood and mdf milling shape. can also be used to dull the surface between the lakierowaniami. it is possible to processing both shaped and flat surfaces.
the machine body is welded from closed steel profiles, primer and paint. the machine consists of sanding station, modules or combination of stations and modules. the feed is passed through the transport rollers placed between the additional frame profiles. the rollers are driven by an electric motor via worm gears and toothed belt. the feed is regulated smoothly (limit values) via the potentiometer. team dociskaj?cych roller is mounted to the machine body. rollers are embedded in the spring. control of thrust roller dociskaj?cych roller is done by hand, by turning the crank. the working team of the upper grinding is located on the back of the pole. the movement of the team by the feed screw motor plate, two guides. each working spindle is placed in the suction casing with outlet to the exhaust with a diameter of 100 mm. -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF MANUFACTURE 2010 -PRODUCTION OF POLISH TECHNICAL PARAMETERS: -GRINDING WIDTH 300 MM -HEIGHT GRINDING 120 MM -ADJUSTABLE HEAD SPEED ON THE INVERTER -ADJUSTABLE FEED SPEED ON THE INVERTER -THREE HEADS -TOP HEAD 0.75 KW -HEAD LOWER 0.75 KW HEAD OF LAW 0.37 KW -FEED ENGINE 0.37 KW -FULL ADJUSTMENT HEADS – THE SEVEN BOTTOM ROLLERS -FIVE ROWS OF THE UPPER ROLLERS -NOZZLE DIAMETER 3 X 100 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH OF 200 CM WIDTH 110 CM -HEIGHT 155 CM -WEIGHT OF ~ 300 KG GRINDERS SHAPED L-SERIES ARE DESIGNED FOR GRINDING SURFACES OF WOOD AND MDF MILLING SHAPE. CAN ALSO BE USED TO DULL THE SURFACE BETWEEN THE LAKIEROWANIAMI. IT IS POSSIBLE TO PROCESSING BOTH SHAPED AND FLAT SURFACES. THE MACHINE BODY IS WELDED FROM CLOSED STEEL PROFILES, PRIMER AND PAINT. THE MACHINE CONSISTS OF SANDING STATION, MODULES OR COMBINATION OF STATIONS AND MODULES. THE FEED IS PASSED THROUGH THE TRANSPORT ROLLERS PLACED BETWEEN THE ADDITIONAL FRAME PROFILES. THE ROLLERS ARE DRIVEN BY AN ELECTRIC MOTOR VIA WORM GEARS AND TOOTHED BELT. THE FEED IS REGULATED SMOOTHLY (LIMIT VALUES) VIA THE POTENTIOMETER. TEAM DOCISKAJ?CYCH ROLLER IS MOUNTED TO THE MACHINE BODY. ROLLERS ARE EMBEDDED IN THE SPRING. CONTROL OF THRUST ROLLER DOCISKAJ?CYCH ROLLER IS DONE BY HAND, BY TURNING THE CRANK. THE WORKING TEAM OF THE UPPER GRINDING IS LOCATED ON THE BACK OF THE POLE. THE MOVEMENT OF THE TEAM BY THE FEED SCREW MOTOR PLATE, TWO GUIDES. EACH WORKING SPINDLE IS PLACED IN THE SUCTION CASING WITH OUTLET TO THE EXHAUST WITH A DIAMETER OF 100 MM.
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 2200 kg<br/>dimensions (l x w x h) approx.: 3750 x 2250 x 2450 mm<br/>description: x axis work area 2200 mm y axis work area 1000 mm x axis movement speed 60 m/min y axis movement speed 50 m/min z axis movement speed 20 m/min working table working table pod and rail no. of rails 6 vacuum cups to secure piece being processed vacuum pump no. pumps 1 single capacity 100 m3/h boring units unit top vertical boring spindles 5 horizontal boring spindles in x 4 router spindles unit top no. controlled axes 3 automatic tool change grooving unit unit top unit fixed for grooving in x tool magazine no. positions 4 safety standard ce mark safety system tools non included WEIGHT APPROX.: 2200 KG
DIMENSIONS (L X W X H) APPROX.: 3750 X 2250 X 2450 MM
DESCRIPTION: X AXIS WORK AREA 2200 MM Y AXIS WORK AREA 1000 MM X AXIS MOVEMENT SPEED 60 M/MIN Y AXIS MOVEMENT SPEED 50 M/MIN Z AXIS MOVEMENT SPEED 20 M/MIN WORKING TABLE WORKING TABLE POD AND RAIL NO. OF RAILS 6 VACUUM CUPS TO SECURE PIECE BEING PROCESSED VACUUM PUMP NO. PUMPS 1 SINGLE CAPACITY 100 M3/H BORING UNITS UNIT TOP VERTICAL BORING SPINDLES 5 HORIZONTAL BORING SPINDLES IN X 4 ROUTER SPINDLES UNIT TOP NO. CONTROLLED AXES 3 AUTOMATIC TOOL CHANGE GROOVING UNIT UNIT TOP UNIT FIXED FOR GROOVING IN X TOOL MAGAZINE NO. POSITIONS 4 SAFETY STANDARD CE MARK SAFETY SYSTEM TOOLS NON INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-built in 1965 - go 2003
table clamping surface: 200 x 630 mm.
dimensions of the grinding wheel:
external - 250 mm
inner - 76 mm
width - 18 mm
minimum wheel diameter: 130 mm.
table movement in the longitudinal direction: 690 mm.
cross table movement: 225 mm.
vertical movement of spindle: 350 mm.
table feed rate: 1-18 m / min.
speed: 2800 rpm.
machine dimensions: 1350 x 2460 mm.
machine weight: 1 500 kg. BUILT IN 1965 - GO 2003 TABLE CLAMPING SURFACE: 200 X 630 MM. DIMENSIONS OF THE GRINDING WHEEL: EXTERNAL - 250 MM INNER - 76 MM WIDTH - 18 MM MINIMUM WHEEL DIAMETER: 130 MM. TABLE MOVEMENT IN THE LONGITUDINAL DIRECTION: 690 MM. CROSS TABLE MOVEMENT: 225 MM. VERTICAL MOVEMENT OF SPINDLE: 350 MM. TABLE FEED RATE: 1-18 M / MIN. SPEED: 2800 RPM. MACHINE DIMENSIONS: 1350 X 2460 MM. MACHINE WEIGHT: 1 500 KG.
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 21.500 €
Ubicación: Land-weight approx.: 12950 kg<br/>dimensions (l x w x h) approx.: 2210 x 3640 x 2885 mm<br/>description: - serial number.: 885446<br> - operating hours: 79700 h<br> - pressure force: 1300 kn<br> - bending length: 3060 mm<br> - installation height: 535 mm<br> - stroke: 365 mm<br> - distance between uprights: 2690 mm<br> - upright outreach: 410 mm<br> - table height: 1050 mm<br> - table width: 120 mm<br> - connected load: 23 kva<br> - oil contents: 250 l<br> - rapid traverse: 200 mm/s<br> - working speed: 1-10 mm/s<br> - withdrawal speed: 135 mm/s<br> - speed x-axis: 500 mm/s<br> - speed r-axis: 300 mm/s<br> - speed z-axis: 1000 mm/s<br> - positioning accuracy y-axis: 0.01 mm<br> - positioining accuracy x-axis: 0.04 mm<br> - positioning accuracy r-axis: 0,08 mm<br> - positioniergenauigkeit z-axis: 0,06 mm<br> - travel x-axis: 600 mm<br> - travel r-axis: 250 mm<br> - travel z-axis: 2310 mm<br> - inclination: +/- 10 mm<br> <br> accessories:<br> control delem da 65t cnc<br> 4 axes backgauge<br> bend guard<br> support console<br> wila tool clamping on top and at the bottom<br> lazer safe<br> safety doors<br> crowning motor-driven<br> die movement pneumatic<br> bending aid available<br> WEIGHT APPROX.: 12950 KG
DIMENSIONS (L X W X H) APPROX.: 2210 X 3640 X 2885 MM
DESCRIPTION: - SERIAL NUMBER.: 885446
- OPERATING HOURS: 79700 H
- PRESSURE FORCE: 1300 KN
- BENDING LENGTH: 3060 MM
- INSTALLATION HEIGHT: 535 MM
- STROKE: 365 MM
- DISTANCE BETWEEN UPRIGHTS: 2690 MM
- UPRIGHT OUTREACH: 410 MM
- TABLE HEIGHT: 1050 MM
- TABLE WIDTH: 120 MM
- CONNECTED LOAD: 23 KVA
- OIL CONTENTS: 250 L
- RAPID TRAVERSE: 200 MM/S
- WORKING SPEED: 1-10 MM/S
- WITHDRAWAL SPEED: 135 MM/S
- SPEED X-AXIS: 500 MM/S
- SPEED R-AXIS: 300 MM/S
- SPEED Z-AXIS: 1000 MM/S
- POSITIONING ACCURACY Y-AXIS: 0.01 MM
- POSITIOINING ACCURACY X-AXIS: 0.04 MM
- POSITIONING ACCURACY R-AXIS: 0,08 MM
- POSITIONIERGENAUIGKEIT Z-AXIS: 0,06 MM
- TRAVEL X-AXIS: 600 MM
- TRAVEL R-AXIS: 250 MM
- TRAVEL Z-AXIS: 2310 MM
- INCLINATION: +/- 10 MM

ACCESSORIES:
CONTROL DELEM DA 65T CNC
4 AXES BACKGAUGE
BEND GUARD
SUPPORT CONSOLE
WILA TOOL CLAMPING ON TOP AND AT THE BOTTOM
LAZER SAFE
SAFETY DOORS
CROWNING MOTOR-DRIVEN
DIE MOVEMENT PNEUMATIC
BENDING AID AVAILABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
edge bander scm holzkraft me 35 preliminary milling

easy to use with all optional equipment: edge bander me 35, oklejaniem corners, also with oklejaniem solid wood strips to a thickness of 5 mm, it offers the best performance in okleiniarkach at this level.

these features, combined ease of use make me 35 the ideal machine for the companies manufacturing furniture.

advantages:

panel system: designed for a perfect finish. the best finish is guaranteed by a team move, which prevents the influence of feed rate on the covering, ensuring smooth movement of the disc.

an adhesive:

excellent performance when used with all types of wood. allows you to stick panels heights from 8 to 50 mm: a true record in its category!

high-frequency motors:

maximum reliability and accuracy. these motors provide the optimal level of trim. in addition, the lack of tape or other conventional propulsion systems prevents the effect of vibration on the quality of the finish.

access to all units.

precise and easy to use: one hand wheel with a numeric readout raises and leaves the pressure by allowing the automatic positioning of operating units depending on the thickness of the plate.

pre-milling unit (diamond cutter)
    power cutting front
    glue unit
    indexing roller team
    cutting unit 2 balls
    top-down milling unit
    unit radial scraper planes
    electrical adhesive scraper planes

manufacturer: holzkraft
technical data
veneer thickness 0.4-3 mm
max. the thickness of the veneer (tape) 5 mm
min. ÷ max. the height of the panel 8 ÷ 50 mm
min length/width panel 190/110 mm
feed speed 7 m/min
weight 540 kg EDGE BANDER SCM HOLZKRAFT ME 35 PRELIMINARY MILLING EASY TO USE WITH ALL OPTIONAL EQUIPMENT: EDGE BANDER ME 35, OKLEJANIEM CORNERS, ALSO WITH OKLEJANIEM SOLID WOOD STRIPS TO A THICKNESS OF 5 MM, IT OFFERS THE BEST PERFORMANCE IN OKLEINIARKACH AT THIS LEVEL. THESE FEATURES, COMBINED EASE OF USE MAKE ME 35 THE IDEAL MACHINE FOR THE COMPANIES MANUFACTURING FURNITURE. ADVANTAGES: PANEL SYSTEM: DESIGNED FOR A PERFECT FINISH. THE BEST FINISH IS GUARANTEED BY A TEAM MOVE, WHICH PREVENTS THE INFLUENCE OF FEED RATE ON THE COVERING, ENSURING SMOOTH MOVEMENT OF THE DISC. AN ADHESIVE: EXCELLENT PERFORMANCE WHEN USED WITH ALL TYPES OF WOOD. ALLOWS YOU TO STICK PANELS HEIGHTS FROM 8 TO 50 MM: A TRUE RECORD IN ITS CATEGORY! HIGH-FREQUENCY MOTORS: MAXIMUM RELIABILITY AND ACCURACY. THESE MOTORS PROVIDE THE OPTIMAL LEVEL OF TRIM. IN ADDITION, THE LACK OF TAPE OR OTHER CONVENTIONAL PROPULSION SYSTEMS PREVENTS THE EFFECT OF VIBRATION ON THE QUALITY OF THE FINISH. ACCESS TO ALL UNITS. PRECISE AND EASY TO USE: ONE HAND WHEEL WITH A NUMERIC READOUT RAISES AND LEAVES THE PRESSURE BY ALLOWING THE AUTOMATIC POSITIONING OF OPERATING UNITS DEPENDING ON THE THICKNESS OF THE PLATE. PRE-MILLING UNIT (DIAMOND CUTTER) POWER CUTTING FRONT GLUE UNIT INDEXING ROLLER TEAM CUTTING UNIT 2 BALLS TOP-DOWN MILLING UNIT UNIT RADIAL SCRAPER PLANES ELECTRICAL ADHESIVE SCRAPER PLANES MANUFACTURER: HOLZKRAFT TECHNICAL DATA VENEER THICKNESS 0.4-3 MM MAX. THE THICKNESS OF THE VENEER (TAPE) 5 MM MIN. ÷ MAX. THE HEIGHT OF THE PANEL 8 ÷ 50 MM MIN LENGTH/WIDTH PANEL 190/110 MM FEED SPEED 7 M/MIN WEIGHT 540 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 2000 x 1100 x 1500 mm<br/>description: tenoner with drilling unit<br> serial number 508<br> 1 x end cutting saw unit, motor 2.20 kw, blade saw diameter 350 mm<br> 1 x vertical spindle unit, motor 4 kw-2800 rpm<br> 1 x drilling unit with 6 spindles, motor 1.10 kw-2800 rpm<br> table size 580 x 350 mm<br> automatic table movement<br> tilting table<br> 2 vertical pneumatic clamps WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 1100 X 1500 MM
DESCRIPTION: TENONER WITH DRILLING UNIT
SERIAL NUMBER 508
1 X END CUTTING SAW UNIT, MOTOR 2.20 KW, BLADE SAW DIAMETER 350 MM
1 X VERTICAL SPINDLE UNIT, MOTOR 4 KW-2800 RPM
1 X DRILLING UNIT WITH 6 SPINDLES, MOTOR 1.10 KW-2800 RPM
TABLE SIZE 580 X 350 MM
AUTOMATIC TABLE MOVEMENT
TILTING TABLE
2 VERTICAL PNEUMATIC CLAMPS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-300 tons tie-bar-less imm built in 2008 with cc 200 control, integrated engel robot erc 33/2-f, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. plastizising screw bimetalic.

technical details	
daylight max	1.300 mm
min. mould hight	400 mm
year of building	2008
working hours	73506
injection pressure	1.616/2.053 bar
injection volumen	511 cm3
nominal capacity of pump motor	45 kw
travel opening	900 mm
screw diameter	55 mm
platen size	1.100 x 1.000 mm
clamping force	3.000 kn 300 TONS TIE-BAR-LESS IMM BUILT IN 2008 WITH CC 200 CONTROL, INTEGRATED ENGEL ROBOT ERC 33/2-F, CRANE FOR MOULD FIXING (2TONS), 16 HOT CHANEL, ACCUMULATOR FOR FAST INJECTION AND PARALLEL MOVEMENTS. 2 CORE PULLER FIX PLATEN, FLOW METER, TRANSPORT BELT. PLASTIZISING SCREW BIMETALIC. TECHNICAL DETAILS DAYLIGHT MAX 1.300 MM MIN. MOULD HIGHT 400 MM YEAR OF BUILDING 2008 WORKING HOURS 73506 INJECTION PRESSURE 1.616/2.053 BAR INJECTION VOLUMEN 511 CM3 NOMINAL CAPACITY OF PUMP MOTOR 45 KW TRAVEL OPENING 900 MM SCREW DIAMETER 55 MM PLATEN SIZE 1.100 X 1.000 MM CLAMPING FORCE 3.000 KN
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Precio: used machinery auction RESALE 4.500 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 2000x2100x2000 mm<br/>description: the machine was not used except for a few test runs. possible applications processing of wood and plastic materials production of moulded parts (prototype construction) series production by working with templates on the copying pen electronic measurement of all 4 movements with led display duplicating pencils double-sided, tool holder morse taper mk2 or collet clamping cross table on precision linear guide system (ball guided carriage and ball roller spindle) pivoting control panel ensures optimum operability projection (distance spindle centre - machine stand) 1000 mm cross table with t-slots 750x750 mm height adjustment 150 mm traverse path in x-axisdirection 1000 mm travel in y direction 800 mm motorised height adjustment of the table 150 mm pneumatic stroke of the milling support with 5 adjustable fixed stops 45° inclination of the milling head on both sides zero locking voltage 400v milling spindle drive with special three-phase motor 5 kw infinitely variable speed up to 24.000 rpm automatic brake (brake force regulator) suction nozzle diameter 100 mm WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 2000X2100X2000 MM
DESCRIPTION: THE MACHINE WAS NOT USED EXCEPT FOR A FEW TEST RUNS. POSSIBLE APPLICATIONS PROCESSING OF WOOD AND PLASTIC MATERIALS PRODUCTION OF MOULDED PARTS (PROTOTYPE CONSTRUCTION) SERIES PRODUCTION BY WORKING WITH TEMPLATES ON THE COPYING PEN ELECTRONIC MEASUREMENT OF ALL 4 MOVEMENTS WITH LED DISPLAY DUPLICATING PENCILS DOUBLE-SIDED, TOOL HOLDER MORSE TAPER MK2 OR COLLET CLAMPING CROSS TABLE ON PRECISION LINEAR GUIDE SYSTEM (BALL GUIDED CARRIAGE AND BALL ROLLER SPINDLE) PIVOTING CONTROL PANEL ENSURES OPTIMUM OPERABILITY PROJECTION (DISTANCE SPINDLE CENTRE - MACHINE STAND) 1000 MM CROSS TABLE WITH T-SLOTS 750X750 MM HEIGHT ADJUSTMENT 150 MM TRAVERSE PATH IN X-AXISDIRECTION 1000 MM TRAVEL IN Y DIRECTION 800 MM MOTORISED HEIGHT ADJUSTMENT OF THE TABLE 150 MM PNEUMATIC STROKE OF THE MILLING SUPPORT WITH 5 ADJUSTABLE FIXED STOPS 45° INCLINATION OF THE MILLING HEAD ON BOTH SIDES ZERO LOCKING VOLTAGE 400V MILLING SPINDLE DRIVE WITH SPECIAL THREE-PHASE MOTOR 5 KW INFINITELY VARIABLE SPEED UP TO 24.000 RPM AUTOMATIC BRAKE (BRAKE FORCE REGULATOR) SUCTION NOZZLE DIAMETER 100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.250 €
Ubicación: Land-universal tool milling machine lid fp3
    xyz travel: 500-300-380 mm
    spindle retainer: iso 40 s20x2
    spindle speeds: 40 dead 2000
    table size: 800 x 375
with 3-axis digital display heidenhain
fixed table 800x420mm
drilling tailstock hor and vert
engine power 3 kw
feed rate and rapid traverse on all 3 movements
central lubrication manuel
original finish
the machine has been cleaned and functionsã¼berprã¼ft
top condition
 UNIVERSAL TOOL MILLING MACHINE LID FP3 XYZ TRAVEL: 500-300-380 MM SPINDLE RETAINER: ISO 40 S20X2 SPINDLE SPEEDS: 40 DEAD 2000 TABLE SIZE: 800 X 375 WITH 3-AXIS DIGITAL DISPLAY HEIDENHAIN FIXED TABLE 800X420MM DRILLING TAILSTOCK HOR AND VERT ENGINE POWER 3 KW FEED RATE AND RAPID TRAVERSE ON ALL 3 MOVEMENTS CENTRAL LUBRICATION MANUEL ORIGINAL FINISH THE MACHINE HAS BEEN CLEANED AND FUNCTIONS&ATILDE;&FRAC14;BERPR&ATILDE;&FRAC14;FT TOP CONDITION
Vendedor: Veltman Machines BV
Año de construcción: usado
Precio: used machinery auction RESALE 1.700 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 3500 x 2500 x 2200 mm<br/>description: cnc control bahmÜller<br> center height 150 mm<br> max. table movement 850 mm<br> max. grinding diameter: 100 mm<br> max. grinding length: 650 mm<br> workpiece speed 50 ­ 1000 1/min.<br> machine is suitable for series and small parts<br> several diameters in one voltage<br> see also pdf document<br> installation dimensions approx. 3.5 x 2.5 m<br> weight approx. 3 t<br> WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2500 X 2200 MM
DESCRIPTION: CNC CONTROL BAHMÜLLER
CENTER HEIGHT 150 MM
MAX. TABLE MOVEMENT 850 MM
MAX. GRINDING DIAMETER: 100 MM
MAX. GRINDING LENGTH: 650 MM
WORKPIECE SPEED 50 ­ 1000 1/MIN.
MACHINE IS SUITABLE FOR SERIES AND SMALL PARTS
SEVERAL DIAMETERS IN ONE VOLTAGE
SEE ALSO PDF DOCUMENT
INSTALLATION DIMENSIONS APPROX. 3.5 X 2.5 M
WEIGHT APPROX. 3 T
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-universal tool milling machine manufacturer: klopp-werke korrad
 type: uw1

technical data:

x 700 mm
 y axis 350 mm
 z axis 400 mm
 pivotable milling head
 2 x 45 degree
 spindle retainer for sk 4
 2-axis digital display
 beh0jrdo07
 pilonenverstellung 0-70 mm
 2 milling spindles horizontal and vertical
 2 tables, a swivel 700 x 330 mm and a solid 700x260mm

spindle drive motor:
 1.5/2,6 kw

horizontal and vertical table slide:
 835 x 200 mm clamping surface
 number of auspann grooves 4
 smallest and largest distance from lower edge of the top of the vertical milling head, rigid angle 50-455 mm

movement spindles:
 table horizontal movement 1 turn of the scale disc 4 mm

pivot table:
 auspannflã¤che 330x700mm
 7 t-slots UNIVERSAL TOOL MILLING MACHINE MANUFACTURER: KLOPP-WERKE KORRAD TYPE: UW1 TECHNICAL DATA: X 700 MM Y AXIS 350 MM Z AXIS 400 MM PIVOTABLE MILLING HEAD 2 X 45 DEGREE SPINDLE RETAINER FOR SK 4 2-AXIS DIGITAL DISPLAY BEH0JRDO07 PILONENVERSTELLUNG 0-70 MM 2 MILLING SPINDLES HORIZONTAL AND VERTICAL 2 TABLES, A SWIVEL 700 X 330 MM AND A SOLID 700X260MM SPINDLE DRIVE MOTOR: 1.5/2,6 KW HORIZONTAL AND VERTICAL TABLE SLIDE: 835 X 200 MM CLAMPING SURFACE NUMBER OF AUSPANN GROOVES 4 SMALLEST AND LARGEST DISTANCE FROM LOWER EDGE OF THE TOP OF THE VERTICAL MILLING HEAD, RIGID ANGLE 50-455 MM MOVEMENT SPINDLES: TABLE HORIZONTAL MOVEMENT 1 TURN OF THE SCALE DISC 4 MM PIVOT TABLE: AUSPANNFL&ATILDE;&CURREN;CHE 330X700MM 7 T-SLOTS
Vendedor: RM-Industrieservice Lager und Büro
Año de construcción: usado
Precio: used machinery auction RESALE 34.000 €
Ubicación: Land-weight approx.: 18500 kg<br/>dimensions (l x w x h) approx.: 8000 x 4000 x 3200 mm<br/>description: cnc control siemens 840 d<br> technical data<br> max. turning diameter 610 mm<br> max. turning length 1850 mm<br> travel y-axis (slide 1) 210 mm<br> travel b-axis (slide 1) 240 mm<br> cross path (slide 1/slide 2) 605/267 mm<br> longitudinal path (slide 1/slide 2) 1470/1440 mm<br> longitudinal path (slide 3) 1490 mm<br> spindle bore 118 mm<br> tool spindle speed 4000 1/min<br> speed range stepless 20 - 3.200 rpm.<br> torque at the spindle 650/1080 nm<br> speed range c-axis 3200 rpm<br> rapid traverse (slide 1) 46/24 n/min.<br> rapid traverse (slide 2) 24/60 m/min<br> total power requirement 130/180 kw<br> weight approx. 18.5 t<br> space requirement lt aw card (lx wx h) 8000 x 4000 x 3200 mm<br> <br> equipment<br> main and counter spindle as integrated spindle motor<br> differential clamping pressure for main and counter spindle<br> drive power each 69 kw (56 - 40% duty cycle)<br> separate speed limitation unit for power chuck<br> tool magazine 40-fold (permitted expansion of tool magazine by a second chain with further 40 places)<br> three-jaw power chuck with bore and jaw quick-changing system fnc 250-72  forkardt, incl. attachment parts for main spindle<br> holder for counter spindle<br> spindle flange with mks (holder and revolving tailstock center<br> in-process probe marposs<br> blower air controllable alternative to the coolant<br> double clamping cylinder<br> the adjustable setting force of the counter spindle for the tailstock operation is made with the programming function 11 traversing to a fixed stop<br> measuring cycles: there is the possibility of measuring with probes at the c-axis.<br> the 5-axis-simultaneous movement programs the axes: x, y, z, c and b.<br> 4-path bed - roller guides<br> kuehlmittelspritzpistole<br> compact filter system lnterlit<br> additional coolant pump 80 bar, for upper tool carrier<br> chip conveyor<br> ethernet interface<br> WEIGHT APPROX.: 18500 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 4000 X 3200 MM
DESCRIPTION: CNC CONTROL SIEMENS 840 D
TECHNICAL DATA
MAX. TURNING DIAMETER 610 MM
MAX. TURNING LENGTH 1850 MM
TRAVEL Y-AXIS (SLIDE 1) 210 MM
TRAVEL B-AXIS (SLIDE 1) 240 MM
CROSS PATH (SLIDE 1/SLIDE 2) 605/267 MM
LONGITUDINAL PATH (SLIDE 1/SLIDE 2) 1470/1440 MM
LONGITUDINAL PATH (SLIDE 3) 1490 MM
SPINDLE BORE 118 MM
TOOL SPINDLE SPEED 4000 1/MIN
SPEED RANGE STEPLESS 20 - 3.200 RPM.
TORQUE AT THE SPINDLE 650/1080 NM
SPEED RANGE C-AXIS 3200 RPM
RAPID TRAVERSE (SLIDE 1) 46/24 N/MIN.
RAPID TRAVERSE (SLIDE 2) 24/60 M/MIN
TOTAL POWER REQUIREMENT 130/180 KW
WEIGHT APPROX. 18.5 T
SPACE REQUIREMENT LT AW CARD (LX WX H) 8000 X 4000 X 3200 MM

EQUIPMENT
MAIN AND COUNTER SPINDLE AS INTEGRATED SPINDLE MOTOR
DIFFERENTIAL CLAMPING PRESSURE FOR MAIN AND COUNTER SPINDLE
DRIVE POWER EACH 69 KW (56 - 40% DUTY CYCLE)
SEPARATE SPEED LIMITATION UNIT FOR POWER CHUCK
TOOL MAGAZINE 40-FOLD (PERMITTED EXPANSION OF TOOL MAGAZINE BY A SECOND CHAIN WITH FURTHER 40 PLACES)
THREE-JAW POWER CHUCK WITH BORE AND JAW QUICK-CHANGING SYSTEM FNC 250-72 FORKARDT, INCL. ATTACHMENT PARTS FOR MAIN SPINDLE
HOLDER FOR COUNTER SPINDLE
SPINDLE FLANGE WITH MKS (HOLDER AND REVOLVING TAILSTOCK CENTER
IN-PROCESS PROBE MARPOSS
BLOWER AIR CONTROLLABLE ALTERNATIVE TO THE COOLANT
DOUBLE CLAMPING CYLINDER
THE ADJUSTABLE SETTING FORCE OF THE COUNTER SPINDLE FOR THE TAILSTOCK OPERATION IS MADE WITH THE PROGRAMMING FUNCTION 11 TRAVERSING TO A FIXED STOP
MEASURING CYCLES: THERE IS THE POSSIBILITY OF MEASURING WITH PROBES AT THE C-AXIS.
THE 5-AXIS-SIMULTANEOUS MOVEMENT PROGRAMS THE AXES: X, Y, Z, C AND B.
4-PATH BED - ROLLER GUIDES
KUEHLMITTELSPRITZPISTOLE
COMPACT FILTER SYSTEM LNTERLIT
ADDITIONAL COOLANT PUMP 80 BAR, FOR UPPER TOOL CARRIER
CHIP CONVEYOR
ETHERNET INTERFACE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-vertical - rotary table -.
flat grinding machine delta lc - 400 -.
14-10-072
shipping time: immediately
number: 14-10-072
manufacturer: delta
type: lc - 400

machine data
construction year: ca 1992
l x w x h: approx. 800 x 800 x 1800 mm
weight: approx. 400 kg

very good condition

technical data
control: conventional

loop scope:
grinding diameter: approx. ã? 400 mm
grinding height: approx. 220 mm

grinding spindle:
grinding wheel dimensions: approx. ã? 200 x 80 x 78 mm
grinding spindle - speed: approximately 2840 rpm

power: approx. 3,0 kw
powered rotary table: approx. 20 & 40 rpm
z - delivery: manual
grinding movement: manual

accessories
â?¢ permanent - magnet
â?¢ wet grinding device
â?¢ machine housing
â?¢ operating instructions
â?¢ grinding wheels - protection
â?¢ cup grinding wheel
â?¢ various wrenches

other accessories on request
price and other specifications on request VERTICAL - ROTARY TABLE -. FLAT GRINDING MACHINE DELTA LC - 400 -. 14-10-072 SHIPPING TIME: IMMEDIATELY NUMBER: 14-10-072 MANUFACTURER: DELTA TYPE: LC - 400 MACHINE DATA CONSTRUCTION YEAR: CA 1992 L X W X H: APPROX. 800 X 800 X 1800 MM WEIGHT: APPROX. 400 KG VERY GOOD CONDITION TECHNICAL DATA CONTROL: CONVENTIONAL LOOP SCOPE: GRINDING DIAMETER: APPROX. &ATILDE;? 400 MM GRINDING HEIGHT: APPROX. 220 MM GRINDING SPINDLE: GRINDING WHEEL DIMENSIONS: APPROX. &ATILDE;? 200 X 80 X 78 MM GRINDING SPINDLE - SPEED: APPROXIMATELY 2840 RPM POWER: APPROX. 3,0 KW POWERED ROTARY TABLE: APPROX. 20 & 40 RPM Z - DELIVERY: MANUAL GRINDING MOVEMENT: MANUAL ACCESSORIES &ACIRC;?&CENT; PERMANENT - MAGNET &ACIRC;?&CENT; WET GRINDING DEVICE &ACIRC;?&CENT; MACHINE HOUSING &ACIRC;?&CENT; OPERATING INSTRUCTIONS &ACIRC;?&CENT; GRINDING WHEELS - PROTECTION &ACIRC;?&CENT; CUP GRINDING WHEEL &ACIRC;?&CENT; VARIOUS WRENCHES OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-:omicron et6 1000 | omicron et6 1500 | omicron et6 2000 | omicron et6 3000 <br/>grinding diameter:595 / 695 mm<br/>grinding length:1000 | 1600 | 2100 | 3000  mm<br/>centre height:300 / 350 mm<br/>distance between centres:1150 | 1750 | 2250 | 3150  mm<br/>swing over bed:595 / 695 mm<br/>max. workpiece weight:1200 (1800 opt.) kg<br/>grinding headstock:_________________________________________________ __<br/>grinding wheel size:610 mm x 230 x min. 50-max.120 mm<br/>grinding spindle speed:600-1250 (stufenlos) 1/min<br/>feed per revolution of handwheel:0,001/ 0,01 / 0,1  mm<br/>grinding head swivellable +/-:±180 °<br/>grinding spindle movement:480 mm<br/>automatic feeds:0,2-3000 mm/min<br/>workhead:________________________________________________ __<br/>workhead - spindle speed:0-300 (stufenlos) 1/min<br/>swiveling workpiece drive:±90 °<br/>workhead - center taper:6 mk<br/>tailstock:__________________________________________________ __<br/>tailstock quill adjustment:70 mm<br/>tailstock quill diameter:80 mm<br/>taper in tailstock:5 mk<br/>table:__________________________________________________ __<br/>table speeds:1-5000 mm/min<br/>swivellable angle of table:+8°/-° | +7°/-3° |  +6°/-2° |  +5°/-1° °<br/>table adjustment - longitudinal:1150 | 1650 | 2150 | 3050  mm<br/>motors:_________________________________________________________ __<br/>grinding wheel motor:11 (15 opt.) kw<br/>workhead motor:4 (5,5 opt.) kw<br/>hydraulic motor:0,75 kw<br/>coolant pump:0,18 kw<br/>machine dimensions:________________________________________________ __<br/>weight of the machine ca.:6800 | 8100 | 9300 | 11000  kg<br/>machine size (lxwxh):5200x1950x2100 |  5700x1950x2100 |  6850x1950 x2100 |9000 x1950x2100  mm<br/>sps machine control:von siemens mit diversen schleifzyklen und touchscreen <br/>grinding wheel with flange: <br/>grinding wheel extractor: <br/>balancing mandrel: <br/>complete cooling system:mit auffangbecken für kühlmittel  <br/>levellig elements: <br/>tools: <br/>dead centers: <br/>:montiert auf dem reitstock (ohne diamant) <br/>counter for table turning: <br/>technical documentation in german language: <br/>ce-design: <br/>telescope cover for guideways:für den tisch aus stoff <br/>machine lubrication:5l für die spindel <br/>frequency converter:für den spindelmotor und werkstückantrieb (stufenlos) <br/>hydraulic unit:zur steuerung der reitstockpinole <br/>central lubrication: <br/>ball screw in axes:x und z <br/>pneumatic unit: <br/>automatic workpiece measurement: <br/>3-jaw chuck: <br/>: <br/>: <br/>dust suction: <br/>internal grinding device: <br/>automatic wheel balancing system : <br/>touch probe: <br/>automatic workpiece measurement: <br/>linear scales: <br/>oil mist collector: <br/>air condition for the cabinet: <br/>steady rests: <br/>collet closer: <br/>crash control: <br/><br/> :OMICRON ET6 1000 | OMICRON ET6 1500 | OMICRON ET6 2000 | OMICRON ET6 3000
GRINDING DIAMETER:595 / 695 MM
GRINDING LENGTH:1000 | 1600 | 2100 | 3000 MM
CENTRE HEIGHT:300 / 350 MM
DISTANCE BETWEEN CENTRES:1150 | 1750 | 2250 | 3150 MM
SWING OVER BED:595 / 695 MM
MAX. WORKPIECE WEIGHT:1200 (1800 OPT.) KG
GRINDING HEADSTOCK:_________________________________________________ __
GRINDING WHEEL SIZE:610 MM X 230 X MIN. 50-MAX.120 MM
GRINDING SPINDLE SPEED:600-1250 (STUFENLOS) 1/MIN
FEED PER REVOLUTION OF HANDWHEEL:0,001/ 0,01 / 0,1 MM
GRINDING HEAD SWIVELLABLE +/-:±180 °
GRINDING SPINDLE MOVEMENT:480 MM
AUTOMATIC FEEDS:0,2-3000 MM/MIN
WORKHEAD:________________________________________________ __
WORKHEAD - SPINDLE SPEED:0-300 (STUFENLOS) 1/MIN
SWIVELING WORKPIECE DRIVE:±90 °
WORKHEAD - CENTER TAPER:6 MK
TAILSTOCK:__________________________________________________ __
TAILSTOCK QUILL ADJUSTMENT:70 MM
TAILSTOCK QUILL DIAMETER:80 MM
TAPER IN TAILSTOCK:5 MK
TABLE:__________________________________________________ __
TABLE SPEEDS:1-5000 MM/MIN
SWIVELLABLE ANGLE OF TABLE:+8°/-° | +7°/-3° | +6°/-2° | +5°/-1° °
TABLE ADJUSTMENT - LONGITUDINAL:1150 | 1650 | 2150 | 3050 MM
MOTORS:_________________________________________________________ __
GRINDING WHEEL MOTOR:11 (15 OPT.) KW
WORKHEAD MOTOR:4 (5,5 OPT.) KW
HYDRAULIC MOTOR:0,75 KW
COOLANT PUMP:0,18 KW
MACHINE DIMENSIONS:________________________________________________ __
WEIGHT OF THE MACHINE CA.:6800 | 8100 | 9300 | 11000 KG
MACHINE SIZE (LXWXH):5200X1950X2100 | 5700X1950X2100 | 6850X1950 X2100 |9000 X1950X2100 MM
SPS MACHINE CONTROL:VON SIEMENS MIT DIVERSEN SCHLEIFZYKLEN UND TOUCHSCREEN
GRINDING WHEEL WITH FLANGE:
GRINDING WHEEL EXTRACTOR:
BALANCING MANDREL:
COMPLETE COOLING SYSTEM:MIT AUFFANGBECKEN FüR KüHLMITTEL
LEVELLIG ELEMENTS:
TOOLS:
DEAD CENTERS:
:MONTIERT AUF DEM REITSTOCK (OHNE DIAMANT)
COUNTER FOR TABLE TURNING:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
TELESCOPE COVER FOR GUIDEWAYS:FüR DEN TISCH AUS STOFF
MACHINE LUBRICATION:5L FüR DIE SPINDEL
FREQUENCY CONVERTER:FüR DEN SPINDELMOTOR UND WERKSTüCKANTRIEB (STUFENLOS)
HYDRAULIC UNIT:ZUR STEUERUNG DER REITSTOCKPINOLE
CENTRAL LUBRICATION:
BALL SCREW IN AXES:X UND Z
PNEUMATIC UNIT:
AUTOMATIC WORKPIECE MEASUREMENT:
3-JAW CHUCK:
:
:
DUST SUCTION:
INTERNAL GRINDING DEVICE:
AUTOMATIC WHEEL BALANCING SYSTEM :
TOUCH PROBE:
AUTOMATIC WORKPIECE MEASUREMENT:
LINEAR SCALES:
OIL MIST COLLECTOR:
AIR CONDITION FOR THE CABINET:
STEADY RESTS:
COLLET CLOSER:
CRASH CONTROL:

Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-model: dure

brand: pemal, poland

-machine in stock
-after reviewing the technical
-vg condition-ready to work
-production of polish pemal

technical parameters:

-the maximum length of the ostrzonych: 640 mm
-supply voltage: 3 x 400 v; 50 hz

– the largest working shift the bottom bracket tool: 660 mm
-the biggest movement of bottom bracket cross: 160 mm
-the biggest movement of the grinding head in the horizontal plane: 140 mm
is the largest knife thickness 14 mm

-the grinding head rotation in the horizontal plane: 360 °
-turn the grinding head in the vertical plane: ± 30 °

– the largest vertical travel of the grinding head: 240 mm
-spindle speed: 3500 or 6000 min-1

-overall dimensions:

-the length of the 1380mm
-width-830 mm
-height 1460mm

-the mass of 515 kg MODEL: DURE BRAND: PEMAL, POLAND -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION-READY TO WORK -PRODUCTION OF POLISH PEMAL TECHNICAL PARAMETERS: -THE MAXIMUM LENGTH OF THE OSTRZONYCH: 640 MM -SUPPLY VOLTAGE: 3 X 400 V; 50 HZ – THE LARGEST WORKING SHIFT THE BOTTOM BRACKET TOOL: 660 MM -THE BIGGEST MOVEMENT OF BOTTOM BRACKET CROSS: 160 MM -THE BIGGEST MOVEMENT OF THE GRINDING HEAD IN THE HORIZONTAL PLANE: 140 MM IS THE LARGEST KNIFE THICKNESS 14 MM -THE GRINDING HEAD ROTATION IN THE HORIZONTAL PLANE: 360 ° -TURN THE GRINDING HEAD IN THE VERTICAL PLANE: ± 30 ° – THE LARGEST VERTICAL TRAVEL OF THE GRINDING HEAD: 240 MM -SPINDLE SPEED: 3500 OR 6000 MIN-1 -OVERALL DIMENSIONS: -THE LENGTH OF THE 1380MM -WIDTH-830 MM -HEIGHT 1460MM -THE MASS OF 515 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-grinding length:7000 mm<br/>grinding width:1450 mm<br/>workpiece height:1000 mm<br/>distance between columns:1510 mm<br/>clamping area:7.270 x 1.250 mm<br/>table load:35 t<br/>table speeds:1-50 m/min<br/>grinding wheel dia. x width:horizontaler stößel: 630x180 mm<br/>spindle drive:horizontaler stößel: 22 kw<br/>vertical movement:250 mm<br/>grinding wheel dia. x width:universal stößel: 500x50 mm<br/>spindle drive:universal stößel: 7 kw<br/>vertical movement:450 mm<br/>spindle motor:7,5 kw<br/>pivoting angle:universal stößel: 45 grad<br/>weight of the machine ca.:65 t<br/>machine size (lxwxh):20.200 x 8.150 x 4.920  mm<br/>grinding wheel dresser: <br/>:plc siemens simatic op 27 <br/>grinding wheel with flange:diverse <br/>electronic wheel balancing device: <br/>levellig elements: <br/><br/>used surface grinding machine, elb, type swn 8 npc-k.  machine cleaned and tested by qualified technician functionality tested.  surface grinding machine in perfect condition, ready for production.  payment: 100% before loading the machine warranty: none GRINDING LENGTH:7000 MM
GRINDING WIDTH:1450 MM
WORKPIECE HEIGHT:1000 MM
DISTANCE BETWEEN COLUMNS:1510 MM
CLAMPING AREA:7.270 X 1.250 MM
TABLE LOAD:35 T
TABLE SPEEDS:1-50 M/MIN
GRINDING WHEEL DIA. X WIDTH:HORIZONTALER STößEL: 630X180 MM
SPINDLE DRIVE:HORIZONTALER STößEL: 22 KW
VERTICAL MOVEMENT:250 MM
GRINDING WHEEL DIA. X WIDTH:UNIVERSAL STößEL: 500X50 MM
SPINDLE DRIVE:UNIVERSAL STößEL: 7 KW
VERTICAL MOVEMENT:450 MM
SPINDLE MOTOR:7,5 KW
PIVOTING ANGLE:UNIVERSAL STößEL: 45 GRAD
WEIGHT OF THE MACHINE CA.:65 T
MACHINE SIZE (LXWXH):20.200 X 8.150 X 4.920 MM
GRINDING WHEEL DRESSER:
:PLC SIEMENS SIMATIC OP 27
GRINDING WHEEL WITH FLANGE:DIVERSE
ELECTRONIC WHEEL BALANCING DEVICE:
LEVELLIG ELEMENTS:

USED SURFACE GRINDING MACHINE, ELB, TYPE SWN 8 NPC-K. MACHINE CLEANED AND TESTED BY QUALIFIED TECHNICIAN FUNCTIONALITY TESTED. SURFACE GRINDING MACHINE IN PERFECT CONDITION, READY FOR PRODUCTION. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NONE
Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)