11909 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-veolia elga berkenfeld reverse osmosis water treatment   (170m3/hr) plants - machine list				
1	veolia/brekenfeld	water treatment ro plant
2	veolia/brekenfeld	water treat cub ro 1 high pressure pump#1 37kw s2
3	veolia/brekenfeld	water treat cub ro 1 high pressure pump#2  45kw s2
4	veolia/brekenfeld	water treat cub ro 1 control panel s2
5	veolia/brekenfeld	water treat cub ro 2 high pressure pump#1 37kw s2
6	veolia/brekenfeld	water treat cub ro 2 high pressure pump#2 45kw s2
7	veolia/brekenfeld	water treat cub ro 2 control panel s2
8	veolia/brekenfeld	water treat cub ro 3 high pressure pump#1 18kw s2
9	veolia/brekenfeld	water treat cub ro 3 high pressure pump#2 18kw s2
10	veolia/brekenfeld	water treat cub ro 3 control panel s2
11	veolia/brekenfeld	water treat cub ro dosing station s2
12	veolia/brekenfeld	water treat cub ro sand filter 1 assy s2
13	veolia/brekenfeld	water treat cub ro sand filter 2 assy s2
14	veolia/brekenfeld	water treat cub ro sand filter 3  assy s2
15	veolia/brekenfeld	water treat cub ro main control panel s2
16	veolia/brekenfeld	water treat cub ro raw water pump 1  assy s2
17	veolia/brekenfeld	water treat cub ro raw water pump 2  assy s2
18	veolia/brekenfeld	water treat cub ro intermediate water tank assy s2
19	veolia/brekenfeld	water treat cub reclamation tank s2
20	veolia/brekenfeld	water treat cub raw water storage tank metito s2
 VEOLIA ELGA BERKENFELD REVERSE OSMOSIS WATER TREATMENT (170M3/HR) PLANTS - MACHINE LIST 1 VEOLIA/BREKENFELD WATER TREATMENT RO PLANT 2 VEOLIA/BREKENFELD WATER TREAT CUB RO 1 HIGH PRESSURE PUMP#1 37KW S2 3 VEOLIA/BREKENFELD WATER TREAT CUB RO 1 HIGH PRESSURE PUMP#2 45KW S2 4 VEOLIA/BREKENFELD WATER TREAT CUB RO 1 CONTROL PANEL S2 5 VEOLIA/BREKENFELD WATER TREAT CUB RO 2 HIGH PRESSURE PUMP#1 37KW S2 6 VEOLIA/BREKENFELD WATER TREAT CUB RO 2 HIGH PRESSURE PUMP#2 45KW S2 7 VEOLIA/BREKENFELD WATER TREAT CUB RO 2 CONTROL PANEL S2 8 VEOLIA/BREKENFELD WATER TREAT CUB RO 3 HIGH PRESSURE PUMP#1 18KW S2 9 VEOLIA/BREKENFELD WATER TREAT CUB RO 3 HIGH PRESSURE PUMP#2 18KW S2 10 VEOLIA/BREKENFELD WATER TREAT CUB RO 3 CONTROL PANEL S2 11 VEOLIA/BREKENFELD WATER TREAT CUB RO DOSING STATION S2 12 VEOLIA/BREKENFELD WATER TREAT CUB RO SAND FILTER 1 ASSY S2 13 VEOLIA/BREKENFELD WATER TREAT CUB RO SAND FILTER 2 ASSY S2 14 VEOLIA/BREKENFELD WATER TREAT CUB RO SAND FILTER 3 ASSY S2 15 VEOLIA/BREKENFELD WATER TREAT CUB RO MAIN CONTROL PANEL S2 16 VEOLIA/BREKENFELD WATER TREAT CUB RO RAW WATER PUMP 1 ASSY S2 17 VEOLIA/BREKENFELD WATER TREAT CUB RO RAW WATER PUMP 2 ASSY S2 18 VEOLIA/BREKENFELD WATER TREAT CUB RO INTERMEDIATE WATER TANK ASSY S2 19 VEOLIA/BREKENFELD WATER TREAT CUB RECLAMATION TANK S2 20 VEOLIA/BREKENFELD WATER TREAT CUB RAW WATER STORAGE TANK METITO S2
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Precio: 68.500 €
Ubicación: Land-; power [ps]: 246; front tyre size: 650/75-32; rear tyre size: 480/80-28; accessories: ertrags- und feuchtigkeitsmessung, motorhersteller:john deere, schüttleranzahl (6 stck.), bordcomputer / monitor, durchsatzkontrolle, häcksler, haspelhorizontalverstellung, hydrostatischer antrieb, kabine, reversiereinrichtung, verlustmessung, feuchtemess ; POWER [PS]: 246; FRONT TYRE SIZE: 650/75-32; REAR TYRE SIZE: 480/80-28; ACCESSORIES: ERTRAGS- UND FEUCHTIGKEITSMESSUNG, MOTORHERSTELLER:JOHN DEERE, SCHüTTLERANZAHL (6 STCK.), BORDCOMPUTER / MONITOR, DURCHSATZKONTROLLE, HäCKSLER, HASPELHORIZONTALVERSTELLUNG, HYDROSTATISCHER ANTRIEB, KABINE, REVERSIEREINRICHTUNG, VERLUSTMESSUNG, FEUCHTEMESS
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-chriwa minimal water treatment  (150m3/hr)machine list	
			
1	chriwa	water treatment-chriwa
2	chriwa	water treatment receiving station
3	chriwa	water treat cub turbidity monitor s2
4	chriwa	water treat cub sand filter 1 chriwa asy s2
5	chriwa	water treat cub sand filter 2 chriwa asy s2
6	chriwa	water treat cub sand filter 3 chriwa asy s2
7	chriwa	water treat cub sand filter  pipings & acc s2
8	chriwa	water treat cub air blower s2
9	chriwa	water treat cub backwash pump s2
10	chriwa	water treat cub semi treated pump 1 s2
11	chriwa	water treat cub  semi treated pump 2 s2
12	chriwa	water treat cub sand filter control panel s2
13	chriwa	major equipment cub raw water receiving area
14	chriwa	water treat cub receiving bisulfite dosing s2
15	chriwa	water treat cub receiving chlorine dosing stn s2
16	chriwa	water treat cub receiving pipings & accessories s2
17	chriwa	water treat cub receiving area pump 1 s2
18	chriwa	water treat cub receiving area pump 2  s2
19	chriwa	water treat cub receiving area pump 3  s2
20	chriwa	water treat cub receiving area pump 4  s2
21	chriwa	water treat cub receiving area pump 5  s2
22	chriwa	water treat cub receiving area pump 6  cl tower s2
23	chriwa	water treat cub receiving area pump 7 co2 s2
24	chriwa	water treat cub receiving area control panel s2
25	chriwa	water treat caustic dosing asy for s2
26	chriwa	water treat heat exchanger for s2
27	chriwa	water treat carbon filter 1 assy for s2
28	chriwa	water treat carbon filter 2 assy for s2
29	chriwa	water treat carbon filter 3 assy for s2
30	chriwa	water treat carbon fil pipings & acc for s2
31	chriwa	water treat filter rec one bag for s2
32	chriwa	water treat rec pipings&acc for s2
33	chriwa	water treat filter rec 20 microns for s2
34	chriwa	water treat polisher 1-3 10 mic for s2
35	chriwa	water treat polisher 2-5 1 mic for s2
36	chriwa	water treat polisher 6-8 1 mic for s2
37	chriwa	water treat backwash rec pump1 for s2
38	chriwa	water treat backwash rec pump2 for s2
39	chriwa	water treat rinser water pump 1 for s2
40	chriwa	water treat rinser water pump 2 for s2
41	chriwa	water treat treatedwater booster pump 1 for s2
42	chriwa	water treat treatedwater booster pump 2 for s2
43	chriwa	water treat plant panel  for s2
44	chriwa	water treat rinser tank asy for s2
45	chriwa	water treat rins tnk pping&acc for s2
46	chriwa	water treat storage tank chriwa for s2
47	hanovia	water treat hanovia uv lamp sys 2 asy for s2
48	hanovia	water treatment uv hanovia ctrl panel for s2
49	hanovia	water treatment uv hanovia sleeve quartz for s2
50	hanovia	water treat hanovia uv lamp sys  2 asy for s2
51	hanovia	water treatment hanovia ctrl panel for s2
52	hanovia	water treatment uv hanovia sleeve quartz for s2
53	hanovia	water treat hanovia uv paa for s2
54		waste water pump control panel for s2
55		waste water pump safety supervision for s2
56		waste water submersible pump for s2
 CHRIWA MINIMAL WATER TREATMENT (150M3/HR)MACHINE LIST 1 CHRIWA WATER TREATMENT-CHRIWA 2 CHRIWA WATER TREATMENT RECEIVING STATION 3 CHRIWA WATER TREAT CUB TURBIDITY MONITOR S2 4 CHRIWA WATER TREAT CUB SAND FILTER 1 CHRIWA ASY S2 5 CHRIWA WATER TREAT CUB SAND FILTER 2 CHRIWA ASY S2 6 CHRIWA WATER TREAT CUB SAND FILTER 3 CHRIWA ASY S2 7 CHRIWA WATER TREAT CUB SAND FILTER PIPINGS & ACC S2 8 CHRIWA WATER TREAT CUB AIR BLOWER S2 9 CHRIWA WATER TREAT CUB BACKWASH PUMP S2 10 CHRIWA WATER TREAT CUB SEMI TREATED PUMP 1 S2 11 CHRIWA WATER TREAT CUB SEMI TREATED PUMP 2 S2 12 CHRIWA WATER TREAT CUB SAND FILTER CONTROL PANEL S2 13 CHRIWA MAJOR EQUIPMENT CUB RAW WATER RECEIVING AREA 14 CHRIWA WATER TREAT CUB RECEIVING BISULFITE DOSING S2 15 CHRIWA WATER TREAT CUB RECEIVING CHLORINE DOSING STN S2 16 CHRIWA WATER TREAT CUB RECEIVING PIPINGS & ACCESSORIES S2 17 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 1 S2 18 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 2 S2 19 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 3 S2 20 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 4 S2 21 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 5 S2 22 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 6 CL TOWER S2 23 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 7 CO2 S2 24 CHRIWA WATER TREAT CUB RECEIVING AREA CONTROL PANEL S2 25 CHRIWA WATER TREAT CAUSTIC DOSING ASY FOR S2 26 CHRIWA WATER TREAT HEAT EXCHANGER FOR S2 27 CHRIWA WATER TREAT CARBON FILTER 1 ASSY FOR S2 28 CHRIWA WATER TREAT CARBON FILTER 2 ASSY FOR S2 29 CHRIWA WATER TREAT CARBON FILTER 3 ASSY FOR S2 30 CHRIWA WATER TREAT CARBON FIL PIPINGS & ACC FOR S2 31 CHRIWA WATER TREAT FILTER REC ONE BAG FOR S2 32 CHRIWA WATER TREAT REC PIPINGS&ACC FOR S2 33 CHRIWA WATER TREAT FILTER REC 20 MICRONS FOR S2 34 CHRIWA WATER TREAT POLISHER 1-3 10 MIC FOR S2 35 CHRIWA WATER TREAT POLISHER 2-5 1 MIC FOR S2 36 CHRIWA WATER TREAT POLISHER 6-8 1 MIC FOR S2 37 CHRIWA WATER TREAT BACKWASH REC PUMP1 FOR S2 38 CHRIWA WATER TREAT BACKWASH REC PUMP2 FOR S2 39 CHRIWA WATER TREAT RINSER WATER PUMP 1 FOR S2 40 CHRIWA WATER TREAT RINSER WATER PUMP 2 FOR S2 41 CHRIWA WATER TREAT TREATEDWATER BOOSTER PUMP 1 FOR S2 42 CHRIWA WATER TREAT TREATEDWATER BOOSTER PUMP 2 FOR S2 43 CHRIWA WATER TREAT PLANT PANEL FOR S2 44 CHRIWA WATER TREAT RINSER TANK ASY FOR S2 45 CHRIWA WATER TREAT RINS TNK PPING&ACC FOR S2 46 CHRIWA WATER TREAT STORAGE TANK CHRIWA FOR S2 47 HANOVIA WATER TREAT HANOVIA UV LAMP SYS 2 ASY FOR S2 48 HANOVIA WATER TREATMENT UV HANOVIA CTRL PANEL FOR S2 49 HANOVIA WATER TREATMENT UV HANOVIA SLEEVE QUARTZ FOR S2 50 HANOVIA WATER TREAT HANOVIA UV LAMP SYS 2 ASY FOR S2 51 HANOVIA WATER TREATMENT HANOVIA CTRL PANEL FOR S2 52 HANOVIA WATER TREATMENT UV HANOVIA SLEEVE QUARTZ FOR S2 53 HANOVIA WATER TREAT HANOVIA UV PAA FOR S2 54 WASTE WATER PUMP CONTROL PANEL FOR S2 55 WASTE WATER PUMP SAFETY SUPERVISION FOR S2 56 WASTE WATER SUBMERSIBLE PUMP FOR S2
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Ubicación: Land-; power [ps]: 200; front tyre size: 800/65-32; rear tyre size: 16.5/80-24; rear tyres remaining: 70; front tyres remaining: 60; accessories: automatischer mähbalkenheber, betriebsstunden:2380, schüttleranzahl (5 stck.), bordcomputer / monitor, durchsatzkontrolle, häcksler, haspelhorizontalverstellung, hydrostatischer antrieb, kabine, reversiereinrichtung, schüttler; working width [cm]: 540 ; POWER [PS]: 200; FRONT TYRE SIZE: 800/65-32; REAR TYRE SIZE: 16.5/80-24; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 60; ACCESSORIES: AUTOMATISCHER MäHBALKENHEBER, BETRIEBSSTUNDEN:2380, SCHüTTLERANZAHL (5 STCK.), BORDCOMPUTER / MONITOR, DURCHSATZKONTROLLE, HäCKSLER, HASPELHORIZONTALVERSTELLUNG, HYDROSTATISCHER ANTRIEB, KABINE, REVERSIEREINRICHTUNG, SCHüTTLER; WORKING WIDTH [CM]: 540
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-max cutting height: 165 mm
radius: 305 mm
table size: 400 x 400 mm
schnittgeschwidigkeiten: 300 - 700 rpm - infinitely variable
total power: 0.55 kw / 400 v
machine weight: approx. 100 kg

equipment / accessories:

adjustable belt speed
swivel machine table
material stop
mobile machine base
1 replacement blade

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine in advance under power.
 MAX CUTTING HEIGHT: 165 MM RADIUS: 305 MM TABLE SIZE: 400 X 400 MM SCHNITTGESCHWIDIGKEITEN: 300 - 700 RPM - INFINITELY VARIABLE TOTAL POWER: 0.55 KW / 400 V MACHINE WEIGHT: APPROX. 100 KG EQUIPMENT / ACCESSORIES: ADJUSTABLE BELT SPEED SWIVEL MACHINE TABLE MATERIAL STOP MOBILE MACHINE BASE 1 REPLACEMENT BLADE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE IN ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-; power [ps]: 95; front tyre size: 380/85-24; rear tyre size: 600/65-34; accessories: fronthydraulik, hydraulische lenkung ; POWER [PS]: 95; FRONT TYRE SIZE: 380/85-24; REAR TYRE SIZE: 600/65-34; ACCESSORIES: FRONTHYDRAULIK, HYDRAULISCHE LENKUNG
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 18.500 €
Ubicación: Land-salam ,
we sale a shirink wrapper machine (film and pad) kister year 1991 in good condition , at 35 pack/min
fomat 0.33 litre 3x4 , 1.5litre 3x2 , 1 litre 3x2.  SALAM , WE SALE A SHIRINK WRAPPER MACHINE (FILM AND PAD) KISTER YEAR 1991 IN GOOD CONDITION , AT 35 PACK/MIN FOMAT 0.33 LITRE 3X4 , 1.5LITRE 3X2 , 1 LITRE 3X2.
Vendedor: LPFC SRL
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 12.000 €
Ubicación: Land-salame ,
we sale a ocme platizer (palettiseur) dismentling , for speed of 19000 b/h of 1.5 litre .  SALAME , WE SALE A OCME PLATIZER (PALETTISEUR) DISMENTLING , FOR SPEED OF 19000 B/H OF 1.5 LITRE .
Vendedor: LPFC SRL
Año de construcción: usado
Precio: 27.800 €
Ubicación: Land-; power [ps]: 275; front tyre size: 30.5l32; rear tyre size: 500/60-22.5; rear tyres remaining: 50; front tyres remaining: 500; accessories: kornkopf, betriebsstunden:2597, schüttleranzahl (6 stck.), bordcomputer / monitor, durchsatzkontrolle, häcksler, hydrostatischer antrieb, kabine, reversiereinrichtung, schüttler, hektarzähler; working width [cm]: 550 ; POWER [PS]: 275; FRONT TYRE SIZE: 30.5L32; REAR TYRE SIZE: 500/60-22.5; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 500; ACCESSORIES: KORNKOPF, BETRIEBSSTUNDEN:2597, SCHüTTLERANZAHL (6 STCK.), BORDCOMPUTER / MONITOR, DURCHSATZKONTROLLE, HäCKSLER, HYDROSTATISCHER ANTRIEB, KABINE, REVERSIEREINRICHTUNG, SCHüTTLER, HEKTARZäHLER; WORKING WIDTH [CM]: 550
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-salam
we sale a twinpack handle applicator inn verry good condition characteristics: handle applicator machine for easy speed of up to 45 packages per minute, automatic machine for the application of self-adhesive handles in a variety of grouped products.   SALAM WE SALE A TWINPACK HANDLE APPLICATOR INN VERRY GOOD CONDITION CHARACTERISTICS: HANDLE APPLICATOR MACHINE FOR EASY SPEED OF UP TO 45 PACKAGES PER MINUTE, AUTOMATIC MACHINE FOR THE APPLICATION OF SELF-ADHESIVE HANDLES IN A VARIETY OF GROUPED PRODUCTS.
Vendedor: LPFC SRL
Año de construcción: usado
Ubicación: Land-x-travel: 400 mm<br/>y-travel: 254 mm<br/>workpiece height: 250 mm<br/>table-size: 650 x 300 mm<br/>vertical movement: 340 mm<br/>passage: lkb: 505 / lks: 370 mm<br/>planetary speed: 40-500 u/min<br/>spindle throat: lkb: 270 / lks 300 mm<br/>spindle stroke: lkb: 100 / lks: 5 - 75 mm<br/>speeds infinitely variable: lks: 15.000-60.000 u/min.<br/>speeds: lkb: 40 - 3.150 u/min<br/>tool taper: sk 40 <br/>feeds: 1-2-4 und 3-6-12 mm/wu<br/>min./max. hole to grind: 0,8-125 mm<br/>drive: 2 kw<br/>weight of the machine ca.: 1,15 t<br/>dimensions of the machine ca.: 1,5 x 1,5 x 1,9 m<br/>condition: very good:  <br/>electric 380 volt:  <br/>seperate control cabinet: 2 x lkb/lks <br/>2 axis digital readout: heidenhain <br/>diverse accessories: 2 werkzeugschränke <br/>miller ( diverse ):  <br/>tool receiving divers:  <br/>coordinate grinding and drilling machine = combined machine<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> X-TRAVEL: 400 MM
Y-TRAVEL: 254 MM
WORKPIECE HEIGHT: 250 MM
TABLE-SIZE: 650 X 300 MM
VERTICAL MOVEMENT: 340 MM
PASSAGE: LKB: 505 / LKS: 370 MM
PLANETARY SPEED: 40-500 U/MIN
SPINDLE THROAT: LKB: 270 / LKS 300 MM
SPINDLE STROKE: LKB: 100 / LKS: 5 - 75 MM
SPEEDS INFINITELY VARIABLE: LKS: 15.000-60.000 U/MIN.
SPEEDS: LKB: 40 - 3.150 U/MIN
TOOL TAPER: SK 40
FEEDS: 1-2-4 UND 3-6-12 MM/WU
MIN./MAX. HOLE TO GRIND: 0,8-125 MM
DRIVE: 2 KW
WEIGHT OF THE MACHINE CA.: 1,15 T
DIMENSIONS OF THE MACHINE CA.: 1,5 X 1,5 X 1,9 M
CONDITION: VERY GOOD:
ELECTRIC 380 VOLT:
SEPERATE CONTROL CABINET: 2 X LKB/LKS
2 AXIS DIGITAL READOUT: HEIDENHAIN
DIVERSE ACCESSORIES: 2 WERKZEUGSCHRäNKE
MILLER ( DIVERSE ):
TOOL RECEIVING DIVERS:
COORDINATE GRINDING AND DRILLING MACHINE = COMBINED MACHINE
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 250 €
Ubicación: Land-app. 1500 pcs. new fuses neozed, diazed, sleeves, match insets
types: list of all fuses and accessories - see photo
2a, 4a, 6a, 10a, 16a, 20a, 25a, 35a, 36a, 50a, 63a,

new!
the fuses were bought from a spare parts store of a company in the course of a bankruptcy and are completely new.

sales price in the total package of € 250 excl. vat (*70%) APP. 1500 PCS. NEW FUSES NEOZED, DIAZED, SLEEVES, MATCH INSETS TYPES: LIST OF ALL FUSES AND ACCESSORIES - SEE PHOTO 2A, 4A, 6A, 10A, 16A, 20A, 25A, 35A, 36A, 50A, 63A, NEW! THE FUSES WERE BOUGHT FROM A SPARE PARTS STORE OF A COMPANY IN THE COURSE OF A BANKRUPTCY AND ARE COMPLETELY NEW. SALES PRICE IN THE TOTAL PACKAGE OF € 250 EXCL. VAT (*70%)
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 570 mm<br/>turning length: 635 mm<br/>control: heidenhain cnc <br/>swing diameter over slide rest: 420 mm<br/>cross movement: 220 mm<br/>main spindle:  <br/>spindle bore: 79 mm<br/>chucking diameter: 225 mm<br/>power capacity at 100 % load: 21 kw<br/>max. torque: 240 nm<br/>turning speed range: 25-5000 u/min<br/>c-axis (main spindle:  <br/>turning speeds: 100 u/min<br/>feed drive cross slide:  <br/>rapid travel speed x-axis: 20 m/min<br/>rapid travel speed z-axis: 24 m/min<br/>universal disc revolver with driven tools:  <br/>number of tool stations: 12 <br/>therefrom driven tools: max. 6 <br/>power requirement: 5 kw<br/>tail stock:  <br/>tailstock diameter in the front section: 80 mm<br/>tailstock adjustment: 550 mm<br/>tailstock taper: mk 4 <br/>overall size of machine without chip conveyor/-tub: 3210x1750x1750 mm<br/>weight of the machine without chip conveyor/-tub: ca. 5300 kg<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>very good condition - with c - axis and driven tools, inspection under power in our stock possible<br/><br/>connection hours 28404 h<br/><br/><br/>equipment / accessories:<br/><br/>- power chuck rota ncw 225 - 7<br/>- 40 standard tool holders<br/>- 7 driven tool holders<br/>- 1 hydraulical steady rest<br/>- tailstock<br/>- chip conveyor<br/>- documentation<br/><br/><br/><br/><br/> TURNING DIAMETER: 570 MM
TURNING LENGTH: 635 MM
CONTROL: HEIDENHAIN CNC
SWING DIAMETER OVER SLIDE REST: 420 MM
CROSS MOVEMENT: 220 MM
MAIN SPINDLE:
SPINDLE BORE: 79 MM
CHUCKING DIAMETER: 225 MM
POWER CAPACITY AT 100 % LOAD: 21 KW
MAX. TORQUE: 240 NM
TURNING SPEED RANGE: 25-5000 U/MIN
C-AXIS (MAIN SPINDLE:
TURNING SPEEDS: 100 U/MIN
FEED DRIVE CROSS SLIDE:
RAPID TRAVEL SPEED X-AXIS: 20 M/MIN
RAPID TRAVEL SPEED Z-AXIS: 24 M/MIN
UNIVERSAL DISC REVOLVER WITH DRIVEN TOOLS:
NUMBER OF TOOL STATIONS: 12
THEREFROM DRIVEN TOOLS: MAX. 6
POWER REQUIREMENT: 5 KW
TAIL STOCK:
TAILSTOCK DIAMETER IN THE FRONT SECTION: 80 MM
TAILSTOCK ADJUSTMENT: 550 MM
TAILSTOCK TAPER: MK 4
OVERALL SIZE OF MACHINE WITHOUT CHIP CONVEYOR/-TUB: 3210X1750X1750 MM
WEIGHT OF THE MACHINE WITHOUT CHIP CONVEYOR/-TUB: CA. 5300 KG
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
VERY GOOD CONDITION - WITH C - AXIS AND DRIVEN TOOLS, INSPECTION UNDER POWER IN OUR STOCK POSSIBLE

CONNECTION HOURS 28404 H


EQUIPMENT / ACCESSORIES:

- POWER CHUCK ROTA NCW 225 - 7
- 40 STANDARD TOOL HOLDERS
- 7 DRIVEN TOOL HOLDERS
- 1 HYDRAULICAL STEADY REST
- TAILSTOCK
- CHIP CONVEYOR
- DOCUMENTATION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Precio: 1.996 €
Ubicación: Land-583 pcs. new nh fuses
manufacturer: euro fuse, nsp, siemens, mertens, siba, sprecher und schuh
types: list of all fuses - see photo
sizes 000, 00, 0, 1, 2, 3, 4,
6a, 10a, 16a, 20a, 25a, 35a, 50a, 63a, 80a, 100a, 160a, 200a, 224a, 250a, 315a, 400a, 500a, 630a, 1250a, 1600a

new!
the fuses were bought from a spare parts store of a company in the course of a bankruptcy and are completely new.

sales price in the complete package around € 1996 excl. vat.  583 PCS. NEW NH FUSES MANUFACTURER: EURO FUSE, NSP, SIEMENS, MERTENS, SIBA, SPRECHER UND SCHUH TYPES: LIST OF ALL FUSES - SEE PHOTO SIZES 000, 00, 0, 1, 2, 3, 4, 6A, 10A, 16A, 20A, 25A, 35A, 50A, 63A, 80A, 100A, 160A, 200A, 224A, 250A, 315A, 400A, 500A, 630A, 1250A, 1600A NEW! THE FUSES WERE BOUGHT FROM A SPARE PARTS STORE OF A COMPANY IN THE COURSE OF A BANKRUPTCY AND ARE COMPLETELY NEW. SALES PRICE IN THE COMPLETE PACKAGE AROUND € 1996 EXCL. VAT.
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 250 mm<br/>grinding length: 1500 mm<br/>centre height: 125 mm<br/>grinding wheel diameter: 400 mm<br/>grinding wheel width: 50 mm<br/>bore: 127 mm<br/>: mk5 <br/>work piece spindle speed: 20-600 u/min<br/>workpiece spindle - bore:  mm<br/>grinding head swivelling: 360 °<br/>grinding spindle head - swivable: 180 + - °<br/>grinding spindle speed: 1500,1700,2200 u/min<br/>: 0,001-0,030 mm/Ø<br/>: 0-0,95 mm/Ø<br/>: ± 6 °<br/>longitudinal feed of the table: 1750 mm<br/>table speeds: 0,02-6 m/min<br/>: 130 kg<br/>: 130 inkl. spannugkg kg<br/>:  mm<br/>grinding depth:  mm<br/>: 80 mm<br/>total power requirement: 6,5 kw<br/>weight of the machine ca.: 2,9 t<br/>dimensions of the machine ca.: 5,6 x 2,0 m<br/>with 2 axis digital read out<br/>with new dgs cooling unit with paper filter<br/><br/>die werkzeugmaschine entspricht zum derzeitigen zeitpunkt nicht den grundlegenden sicherheits- und schutzanforderungen wie in der betrsichv 2015 genannt.<br/>eine anhebung des erforderlichen mindest-schutzzieles ist mittels einer gefährdungsbeurteilung nach betrsichv zu ermitteln.<br/><br/><br/><br/> GRINDING DIAMETER: 250 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 125 MM
GRINDING WHEEL DIAMETER: 400 MM
GRINDING WHEEL WIDTH: 50 MM
BORE: 127 MM
: MK5
WORK PIECE SPINDLE SPEED: 20-600 U/MIN
WORKPIECE SPINDLE - BORE: MM
GRINDING HEAD SWIVELLING: 360 °
GRINDING SPINDLE HEAD - SWIVABLE: 180 + - °
GRINDING SPINDLE SPEED: 1500,1700,2200 U/MIN
: 0,001-0,030 MM/Ø
: 0-0,95 MM/Ø
: ± 6 °
LONGITUDINAL FEED OF THE TABLE: 1750 MM
TABLE SPEEDS: 0,02-6 M/MIN
: 130 KG
: 130 INKL. SPANNUGKG KG
: MM
GRINDING DEPTH: MM
: 80 MM
TOTAL POWER REQUIREMENT: 6,5 KW
WEIGHT OF THE MACHINE CA.: 2,9 T
DIMENSIONS OF THE MACHINE CA.: 5,6 X 2,0 M
WITH 2 AXIS DIGITAL READ OUT
WITH NEW DGS COOLING UNIT WITH PAPER FILTER

DIE WERKZEUGMASCHINE ENTSPRICHT ZUM DERZEITIGEN ZEITPUNKT NICHT DEN GRUNDLEGENDEN SICHERHEITS- UND SCHUTZANFORDERUNGEN WIE IN DER BETRSICHV 2015 GENANNT.
EINE ANHEBUNG DES ERFORDERLICHEN MINDEST-SCHUTZZIELES IST MITTELS EINER GEFäHRDUNGSBEURTEILUNG NACH BETRSICHV ZU ERMITTELN.



Vendedor: BEMA
Año de construcción: usado
Ubicación: Land-special offer:6 col uv used gidue label flexopress 370 mm 
used gidue narrow web flexo printing press
in operation


machine offered subject to unsold

please let us know if you need other machines or if you have your used machines for sale

  SPECIAL OFFER:6 COL UV USED GIDUE LABEL FLEXOPRESS 370 MM USED GIDUE NARROW WEB FLEXO PRINTING PRESS IN OPERATION MACHINE OFFERED SUBJECT TO UNSOLD PLEASE LET US KNOW IF YOU NEED OTHER MACHINES OR IF YOU HAVE YOUR USED MACHINES FOR SALE
Vendedor: Flexo
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 2400 x 2300 x 2300 mm<br/>description: 2 slides. maximum diameter 250 mm. WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 2300 X 2300 MM
DESCRIPTION: 2 SLIDES. MAXIMUM DIAMETER 250 MM.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc hydraulic press brake ultima uad 400 t x 6100 mm year 2016
linear cnc measurement for the deep y1-y2
esa 550, 2d graphical cnc control, x-r back gauge on heavily built
cnc controlled hydraulic crowning
1 set of upper tools rolleri p. 97-85-t.s.c.i.aces.r08
1 set of sub-tools or assistants rolleri m460-r
2 auflegearme on linear guide
ce with lazersafe dual beam
touch screen panel 2d: esa-550 2-d type pc including workstation software motor-driven adjustment z1-z2 buttons. 
2 cnc bending aids including parking difficult integrated backgauge x-r back gauge 1500 mm 1 chuck up to 160 t pressure adsorption/m above 1 tool holder up to 160 t pressure adsorption/m below
1 manual fast clamping top 1 m95-80-100 80â° v = 100 mm, 7x835mm 1x415mm 1 photocell 1 narrow higher table clamp plug matrices and pm
1 automatic sheet thickness measurement
 CNC HYDRAULIC PRESS BRAKE ULTIMA UAD 400 T X 6100 MM YEAR 2016 LINEAR CNC MEASUREMENT FOR THE DEEP Y1-Y2 ESA 550, 2D GRAPHICAL CNC CONTROL, X-R BACK GAUGE ON HEAVILY BUILT CNC CONTROLLED HYDRAULIC CROWNING 1 SET OF UPPER TOOLS ROLLERI P. 97-85-T.S.C.I.ACES.R08 1 SET OF SUB-TOOLS OR ASSISTANTS ROLLERI M460-R 2 AUFLEGEARME ON LINEAR GUIDE CE WITH LAZERSAFE DUAL BEAM TOUCH SCREEN PANEL 2D: ESA-550 2-D TYPE PC INCLUDING WORKSTATION SOFTWARE MOTOR-DRIVEN ADJUSTMENT Z1-Z2 BUTTONS. 2 CNC BENDING AIDS INCLUDING PARKING DIFFICULT INTEGRATED BACKGAUGE X-R BACK GAUGE 1500 MM 1 CHUCK UP TO 160 T PRESSURE ADSORPTION/M ABOVE 1 TOOL HOLDER UP TO 160 T PRESSURE ADSORPTION/M BELOW 1 MANUAL FAST CLAMPING TOP 1 M95-80-100 80&ACIRC;&DEG; V = 100 MM, 7X835MM 1X415MM 1 PHOTOCELL 1 NARROW HIGHER TABLE CLAMP PLUG MATRICES AND PM 1 AUTOMATIC SHEET THICKNESS MEASUREMENT
Vendedor: VVB-Concept UG
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 9000 kg<br/>dimensions (l x w x h) approx.: 9000 x 4000 x 2500 mm<br/>description: 2 oxicutting heads. 1 plasma head. cutting capacity 6000x3500 mm. machine disassembled in warehouse WEIGHT APPROX.: 9000 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X 4000 X 2500 MM
DESCRIPTION: 2 OXICUTTING HEADS. 1 PLASMA HEAD. CUTTING CAPACITY 6000X3500 MM. MACHINE DISASSEMBLED IN WAREHOUSE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-structural steel frame with a footprint of round approx. hl110.3 m * hb60.4 m * h10.3 m and a covered gross floor area of approx. 6.661 square meters. in its second life cycle, this structure could be used for the construction of a  logistics warehouse, production hall with overhead cranes and many others. 
 
approximate dimensions: 
built surface: approx. 6661 square meters; 
length: approx.  110.30 meters; 
width:   approx.    60.39 meters; 
height:  approx.    10.25 meters; 
 
snow load: 
because the previous roofing (cement fiberboard, mineral fibre insulation, trapezoidal steel panels) was quite heavy, the snow load by use of st-pir-st sandwich panels is likely to be higher. the exact static value must be calculated by a structural engineer. 
 
structural steel work: 
bolted steel frame structure made of hot-rolled and primed / coated euro profiles. the longitudinal stiffness of the hall is achieved by wind bracings in the roof level and vertical bracings in the side walls. the roof substructure consists from trapezoidal load bearing steel shells. 
 
roofing: 
the corrugated asbestos roof panels together with mineral fibre insulation will be disposed of locally. 
 
facade: 
the cladding of the building comprises of masonry and sandwich wall panels that shall be disposed locally. 
 
documentation: the original structural engineering calculations could not be found. 
location: border region of germany and netherlands. viewing by appointment. 
availability: the structure can be deconstructed immediately. 
export price: upon written request with full company / contact information.  STRUCTURAL STEEL FRAME WITH A FOOTPRINT OF ROUND APPROX. HL110.3 M * HB60.4 M * H10.3 M AND A COVERED GROSS FLOOR AREA OF APPROX. 6.661 SQUARE METERS. IN ITS SECOND LIFE CYCLE, THIS STRUCTURE COULD BE USED FOR THE CONSTRUCTION OF A LOGISTICS WAREHOUSE, PRODUCTION HALL WITH OVERHEAD CRANES AND MANY OTHERS. APPROXIMATE DIMENSIONS: BUILT SURFACE: APPROX. 6661 SQUARE METERS; LENGTH: APPROX. 110.30 METERS; WIDTH: APPROX. 60.39 METERS; HEIGHT: APPROX. 10.25 METERS; SNOW LOAD: BECAUSE THE PREVIOUS ROOFING (CEMENT FIBERBOARD, MINERAL FIBRE INSULATION, TRAPEZOIDAL STEEL PANELS) WAS QUITE HEAVY, THE SNOW LOAD BY USE OF ST-PIR-ST SANDWICH PANELS IS LIKELY TO BE HIGHER. THE EXACT STATIC VALUE MUST BE CALCULATED BY A STRUCTURAL ENGINEER. STRUCTURAL STEEL WORK: BOLTED STEEL FRAME STRUCTURE MADE OF HOT-ROLLED AND PRIMED / COATED EURO PROFILES. THE LONGITUDINAL STIFFNESS OF THE HALL IS ACHIEVED BY WIND BRACINGS IN THE ROOF LEVEL AND VERTICAL BRACINGS IN THE SIDE WALLS. THE ROOF SUBSTRUCTURE CONSISTS FROM TRAPEZOIDAL LOAD BEARING STEEL SHELLS. ROOFING: THE CORRUGATED ASBESTOS ROOF PANELS TOGETHER WITH MINERAL FIBRE INSULATION WILL BE DISPOSED OF LOCALLY. FACADE: THE CLADDING OF THE BUILDING COMPRISES OF MASONRY AND SANDWICH WALL PANELS THAT SHALL BE DISPOSED LOCALLY. DOCUMENTATION: THE ORIGINAL STRUCTURAL ENGINEERING CALCULATIONS COULD NOT BE FOUND. LOCATION: BORDER REGION OF GERMANY AND NETHERLANDS. VIEWING BY APPOINTMENT. AVAILABILITY: THE STRUCTURE CAN BE DECONSTRUCTED IMMEDIATELY. EXPORT PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Precio: used machinery auction RESALE 5.000 €
Ubicación: Land-weight approx.: 4150 kg<br/>dimensions (l x w x h) approx.: 4800 x 2000 x 1700 mm<br/>description: distance between centres 1600 mm. maximum grinding diameter 348 mm. grinding wheel dimensions 500x203x100 mm. internal spindle WEIGHT APPROX.: 4150 KG
DIMENSIONS (L X W X H) APPROX.: 4800 X 2000 X 1700 MM
DESCRIPTION: DISTANCE BETWEEN CENTRES 1600 MM. MAXIMUM GRINDING DIAMETER 348 MM. GRINDING WHEEL DIMENSIONS 500X203X100 MM. INTERNAL SPINDLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 qty. 13 second-hand bell annealing furnaces
mfc.:	matthias ludwig 	type:	hugf185-320	built:	1954 – 1965
modernisation in 1967	modification to h2 in 1990	2-4 coils/base		
no. of base:	26	base relationship:	1 : 2.0	annealing temp.: 620-700 °c
coil dia.:	1850 mm	max. stack height:	3200 mm
2 qty. 13 second-hand bell annealing furnaces
mfc.:	matthias ludwig 	type:	hugf185-390	built:	1956 – 1988
modernisation in 1970	modification to h2 in 1990	2-4 coils/base		
no. of base:	30	base relationship:	1 : 2.3	annealing temp.:  620-700 °c
coil od dia.:	1850 mm	max. stack height:	3900 mm
3 qty. 5 second-hand bell annealing furnaces
mfc.:	loi	type:	hugf 185-420 hph		built:	1987
no. of base:	3	coil od dia.:	1850 mm		max. stack height:4200 mm
charge weight:	75 t		annealing temp.:	620 – 700 °c
 1 QTY. 13 SECOND-HAND BELL ANNEALING FURNACES MFC.: MATTHIAS LUDWIG TYPE: HUGF185-320 BUILT: 1954 – 1965 MODERNISATION IN 1967 MODIFICATION TO H2 IN 1990 2-4 COILS/BASE NO. OF BASE: 26 BASE RELATIONSHIP: 1 : 2.0 ANNEALING TEMP.: 620-700 °C COIL DIA.: 1850 MM MAX. STACK HEIGHT: 3200 MM 2 QTY. 13 SECOND-HAND BELL ANNEALING FURNACES MFC.: MATTHIAS LUDWIG TYPE: HUGF185-390 BUILT: 1956 – 1988 MODERNISATION IN 1970 MODIFICATION TO H2 IN 1990 2-4 COILS/BASE NO. OF BASE: 30 BASE RELATIONSHIP: 1 : 2.3 ANNEALING TEMP.: 620-700 °C COIL OD DIA.: 1850 MM MAX. STACK HEIGHT: 3900 MM 3 QTY. 5 SECOND-HAND BELL ANNEALING FURNACES MFC.: LOI TYPE: HUGF 185-420 HPH BUILT: 1987 NO. OF BASE: 3 COIL OD DIA.: 1850 MM MAX. STACK HEIGHT:4200 MM CHARGE WEIGHT: 75 T ANNEALING TEMP.: 620 – 700 °C
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 1600 kg<br/>dimensions (l x w x h) approx.: 1700 x 1400 x 1700 mm<br/>description: distance between centres 500 mm. height of centres 100 mm. grinding wheel diameter 300 mm. maximum width of grinding wheel 50 mm. cone of centres 3 and 4 m. power of the main engine 3 hp. tilt angle of grinding wheel 80º WEIGHT APPROX.: 1600 KG
DIMENSIONS (L X W X H) APPROX.: 1700 X 1400 X 1700 MM
DESCRIPTION: DISTANCE BETWEEN CENTRES 500 MM. HEIGHT OF CENTRES 100 MM. GRINDING WHEEL DIAMETER 300 MM. MAXIMUM WIDTH OF GRINDING WHEEL 50 MM. CONE OF CENTRES 3 AND 4 M. POWER OF THE MAIN ENGINE 3 HP. TILT ANGLE OF GRINDING WHEEL 80º
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
gr. sã¤geblattdurchm.: 400 mm
maximum cutting width: 2500 mm
max cutting height: 130 mm
table - or rail length: 2700 mm
total power: 2 x 4 kw / 400 v
machine weight: 950 kg

equipment / accessories:

45 â° swiveling saw blades
saw unit electr. adjustable

all technical data are created according to our best knowledge and existing documentation; expressly reserved by mistake.
each party has the opportunity to test the saw before making a purchase in our factory under power.
 GR. S&ATILDE;&CURREN;GEBLATTDURCHM.: 400 MM MAXIMUM CUTTING WIDTH: 2500 MM MAX CUTTING HEIGHT: 130 MM TABLE - OR RAIL LENGTH: 2700 MM TOTAL POWER: 2 X 4 KW / 400 V MACHINE WEIGHT: 950 KG EQUIPMENT / ACCESSORIES: 45 &ACIRC;&DEG; SWIVELING SAW BLADES SAW UNIT ELECTR. ADJUSTABLE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTATION; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE SAW BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 5000 x 2300 x 2560 mm<br/>description: grinding length maximum 1200 mm. grinding width maximum 550 mm. grinding height maximum 450 mm. table size 1200x450 mm. grinding wheel dimensions 400x127x100 mm. maximum transversal travel 500 mm. cnc fagor. grinding wheel power 10 hp WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2300 X 2560 MM
DESCRIPTION: GRINDING LENGTH MAXIMUM 1200 MM. GRINDING WIDTH MAXIMUM 550 MM. GRINDING HEIGHT MAXIMUM 450 MM. TABLE SIZE 1200X450 MM. GRINDING WHEEL DIMENSIONS 400X127X100 MM. MAXIMUM TRANSVERSAL TRAVEL 500 MM. CNC FAGOR. GRINDING WHEEL POWER 10 HP
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-extraction arm festo asa2500 as wall swing arm

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

swivel arm with power supply unit and druckluftexcenterschleifer
aluminium tube approx. 1700 x 50mm
flexible connection hose 50 mm
height approx. 1300 mm power unit of uk port to uk boom
power supply unit with 2 sockets and 5 compressed air connections, as well as pressure reducer and oiler
new ias2 connection unit
ias2 hose blue
grinder festo let 150-7
the suspension on the swivel unit was obviously changed and new welded, see photos
very good condition of vocational school

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". EXTRACTION ARM FESTO ASA2500 AS WALL SWING ARM THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. SWIVEL ARM WITH POWER SUPPLY UNIT AND DRUCKLUFTEXCENTERSCHLEIFER ALUMINIUM TUBE APPROX. 1700 X 50MM FLEXIBLE CONNECTION HOSE 50 MM HEIGHT APPROX. 1300 MM POWER UNIT OF UK PORT TO UK BOOM POWER SUPPLY UNIT WITH 2 SOCKETS AND 5 COMPRESSED AIR CONNECTIONS, AS WELL AS PRESSURE REDUCER AND OILER NEW IAS2 CONNECTION UNIT IAS2 HOSE BLUE GRINDER FESTO LET 150-7 THE SUSPENSION ON THE SWIVEL UNIT WAS OBVIOUSLY CHANGED AND NEW WELDED, SEE PHOTOS VERY GOOD CONDITION OF VOCATIONAL SCHOOL PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-max. 240 kg dough, safty device\r\n2 speeds, 2 timers, hydraulic fixing the bowl\r\ndoughhook stainless steel\r\n1 moveable stainless steel bowls\r\n MAX. 240 KG DOUGH, SAFTY DEVICE\R\N2 SPEEDS, 2 TIMERS, HYDRAULIC FIXING THE BOWL\R\NDOUGHHOOK STAINLESS STEEL\R\N1 MOVEABLE STAINLESS STEEL BOWLS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-complete used  ice cream plant  & ice cream line

ice cream cups , capacity per hour
200cs/hr
ice cream cones, capacity per hour
250cs/hr 
ice cream stick line capacity per hour ?
300cs/hr crunch


production equipment

•           ice-cream freezers – tetra pak hoyer 'kf 1000 n. 1997, tetra pak hoyer 'kf
•           1150 n' 1997 and hoyer 'kf 1150xc'
•           ice-cream stick line (6 lanes) - simampolo, year: 2012
•           ice cream bulk filling machine - omari 2014
•           cup & cone filling machine (2 lanes) - gp  2003
•           ice-cream cup filling machine
•           hardening tunnel
•           ice cream flavor swirler
•           metal detector -loma 'iq2', loma 'iq3'1998
•           drum mobile stainless steel mixer
•           (2) tape dispensers - better packages, '333'
•           heat exchanger & pump -apv
laboratory equipment
•           water bath -memmert 'wb14'
•           viscometer -brookfield 'dv1+'
•           hand refractometers –atago.
•           refractometer - atago 'pr301' COMPLETE USED ICE CREAM PLANT & ICE CREAM LINE ICE CREAM CUPS , CAPACITY PER HOUR 200CS/HR ICE CREAM CONES, CAPACITY PER HOUR 250CS/HR ICE CREAM STICK LINE CAPACITY PER HOUR ? 300CS/HR CRUNCH PRODUCTION EQUIPMENT • ICE-CREAM FREEZERS – TETRA PAK HOYER 'KF 1000 N. 1997, TETRA PAK HOYER 'KF • 1150 N' 1997 AND HOYER 'KF 1150XC' • ICE-CREAM STICK LINE (6 LANES) - SIMAMPOLO, YEAR: 2012 • ICE CREAM BULK FILLING MACHINE - OMARI 2014 • CUP & CONE FILLING MACHINE (2 LANES) - GP 2003 • ICE-CREAM CUP FILLING MACHINE • HARDENING TUNNEL • ICE CREAM FLAVOR SWIRLER • METAL DETECTOR -LOMA 'IQ2', LOMA 'IQ3'1998 • DRUM MOBILE STAINLESS STEEL MIXER • (2) TAPE DISPENSERS - BETTER PACKAGES, '333' • HEAT EXCHANGER & PUMP -APV LABORATORY EQUIPMENT • WATER BATH -MEMMERT 'WB14' • VISCOMETER -BROOKFIELD 'DV1+' • HAND REFRACTOMETERS –ATAGO. • REFRACTOMETER - ATAGO 'PR301' "PALETTE" • GLASS HUMIDIFIERS. • FUME HOOD -SAFELAB AND LABCRAFT 'AIR XIS BRIS SAC' • EYE-WASH & SHOWER STATION • STAINLESS STEEL LABORATORY OVEN -MEMMERT 'INB 500' AND MEMMERT 'UNB 500' CONVEYORS • INCLINED BELT CONVEYORS • BELT CONVEYORS • ROLLER CONVEYOR AND GRAVITY-TYPE ROLLER CONVEYORS TANKS • STAINLESS STEEL ELEVATED MIXING TANK - APV • STAINLESS STEEL HOT WATER TANK • (2) HORIZONTAL ST STEEL PALM OIL TANK - 1000MM DIA X 1500MM LONG AND 1000MM DIA X 1500MM • PALM OIL MIXING TANK - 1800MM DIA X 1500MM HIGH • STAINLESS STEEL DE-CHLORINISED WATER TANK - 1800MM X 1600MM • STAINLESS STEEL JACKETED HOT WATER TANK - 1800MM DIA X 1600MM • STAINLESS STEEL HYDRATION TANKS - 1500MM DIA X 1400MM HIGH • CONDENSATE RETURN TANK - 1600MM DIA X 1400MM PLANT SUPPORT EQUIPMENT • COOLING TOWER • CHILLED WATER HEAT EXCHANGER - ALFA LAVAL 'M10 BWFG' • EVAPORATIVE CONDENSERS -EVAPCO AND DESCA 'CFRC 042' • DEMOUNTABLE CHILLER ROOM • (2) STEEL LOADING DOCKS - 2250MM X 2400MM • INFLATABLE DOCK SHELTER • (2) CHILLERS - INSUFLEX • AIR HANDLING UNIT - TRANE 'DWAA 1008 HA 4 A' WAREHOUSING • BOLTLESS STEEL RACKING • PALLET TRUCK & PLATFORM TROLLEY –EUROLIFTER PLEASE ASK FOR MORE PICTURES FOR FACTORY/ WE TRANSFER AND EQUIPMENT LIST DOCUMENTS ICE-CREAM STICK LINE (6 LANES) - SIMAMPOLO, YEAR:2012, C/W LAIF WRAPPER; JAMIE INK JET PRINTER; CARTON SEALING M/C MODEL EXC 103 SD; BELT CONVEYOR ; OPERATOR PLATFORM PHOTOS ARE ATTACHED
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-max. 180 kg dough, 2 speeds, timer\r\ninclude 2 moveable bowls stainless steel\r\nsafety device,\r\n MAX. 180 KG DOUGH, 2 SPEEDS, TIMER\R\NINCLUDE 2 MOVEABLE BOWLS STAINLESS STEEL\R\NSAFETY DEVICE,\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 800 €
Ubicación: Land-for sale a alstom pg851 generator protection
in good working condition for sale.

the system run by a mtu 10,5 kv diesel generator.

stromerzeuger-discount.com
 kürtener straße 13
 d-51465 bergisch gladbach 
 mobile: 00491635263546
 telefon: 0049 2202 2492256 
 fax: 0049 2202 2492257
 email: info@stromerzeuger-discount.de


  FOR SALE A ALSTOM PG851 GENERATOR PROTECTION IN GOOD WORKING CONDITION FOR SALE. THE SYSTEM RUN BY A MTU 10,5 KV DIESEL GENERATOR. STROMERZEUGER-DISCOUNT.COM KüRTENER STRAßE 13 D-51465 BERGISCH GLADBACH MOBILE: 00491635263546 TELEFON: 0049 2202 2492256 FAX: 0049 2202 2492257 EMAIL: INFO@STROMERZEUGER-DISCOUNT.DE
Vendedor: Kandlin Stromerzeuger-Ankauf GmbH
Año de construcción: usado
Ubicación: Land-length cylinder 250 mm\r\nmachine is working without belt\r\nproduct range: crescents, beer sticks, salt sticks\r\n LENGTH CYLINDER 250 MM\R\NMACHINE IS WORKING WITHOUT BELT\R\NPRODUCT RANGE: CRESCENTS, BEER STICKS, SALT STICKS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-control system :	
sinumeric 840d without shop turn	
turning over bed: 535 mm	
turning over carriage: 290 mm	
turning diameter: 180 mm	
spindle bore: 51 (76) mm	
spindle speeds: 60-6000 rpm	
tool changer positions: 12	
spindle passage: max Ø 58 mm	
machine dimensions:	
2800 x 1505 x 1920 mm	
machine weight: 4300 kg	
accessories:	
feeder magazine spacesaver:	
2200 s a18- Ø 6 - 65 length 1000 mm	
container of the cooling liquid	
cooling 7 bar	
chip conveyor	
cylinder- smw-autoblok vnk 150/67	
sets of collets	
availability: 30.03.2019   CONTROL SYSTEM : SINUMERIC 840D WITHOUT SHOP TURN TURNING OVER BED: 535 MM TURNING OVER CARRIAGE: 290 MM TURNING DIAMETER: 180 MM SPINDLE BORE: 51 (76) MM SPINDLE SPEEDS: 60-6000 RPM TOOL CHANGER POSITIONS: 12 SPINDLE PASSAGE: MAX Ø 58 MM MACHINE DIMENSIONS: 2800 X 1505 X 1920 MM MACHINE WEIGHT: 4300 KG ACCESSORIES: FEEDER MAGAZINE SPACESAVER: 2200 S A18- Ø 6 - 65 LENGTH 1000 MM CONTAINER OF THE COOLING LIQUID COOLING 7 BAR CHIP CONVEYOR CYLINDER- SMW-AUTOBLOK VNK 150/67 SETS OF COLLETS AVAILABILITY: 30.03.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear SIZES FROM 5 KG DOUGH/7 LTR. UNTIL 60 KG/75 LTR.\R\N1 SPEED (OPTIONAL WITH 2 SPEEDS), WHITE PAINTED STEEL BODY, BOWL + SPIRAL + DOUGH DEFLECTOR + SAFETY RACK MADE OF STAINLESS STEEL\R\NBOWL IS COUNTERROTATING (OPTIONAL WITH REMOVABLE BOWL)\R\NCHAIN DRIVE, SELF-OILING STEP-DOWN-GEAR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-machine type cnc lathe - inclined bed machine make biglia type b 1000 cnc model year 1997 control type cnc storage france country of origin italy delivery immediately cargo base free technical details loaded

turning diameter 560 mm turning length 1045 mm control fanuc ot bar passage: 70 mm speed range - spindle 3000 rev/min feed range - revolver / infinitely 1200 mm / min rapid traverse 12/12 m / min number of turret: 1 piece turret - places: 12 stations w erkzeugaufnahme 25 x 25 tailstock mk 5 kw total power consumption 26 machine weight 6 tons of space requirement approx. 3500 x 1800 x 1800 mm accessories 3 - bake - feed yes complete machine documentation yes conveyors yes electronic handwheel kã¼hlmitteleinrichtung

additional information

cnc fanuc ot

315 slide feed
 with lot off tools MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE BIGLIA TYPE B 1000 CNC MODEL YEAR 1997 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN ITALY DELIVERY IMMEDIATELY CARGO BASE FREE TECHNICAL DETAILS LOADED TURNING DIAMETER 560 MM TURNING LENGTH 1045 MM CONTROL FANUC OT BAR PASSAGE: 70 MM SPEED RANGE - SPINDLE 3000 REV/MIN FEED RANGE - REVOLVER / INFINITELY 1200 MM / MIN RAPID TRAVERSE 12/12 M / MIN NUMBER OF TURRET: 1 PIECE TURRET - PLACES: 12 STATIONS W ERKZEUGAUFNAHME 25 X 25 TAILSTOCK MK 5 KW TOTAL POWER CONSUMPTION 26 MACHINE WEIGHT 6 TONS OF SPACE REQUIREMENT APPROX. 3500 X 1800 X 1800 MM ACCESSORIES 3 - BAKE - FEED YES COMPLETE MACHINE DOCUMENTATION YES CONVEYORS YES ELECTRONIC HANDWHEEL K&ATILDE;&FRAC14;HLMITTELEINRICHTUNG ADDITIONAL INFORMATION CNC FANUC OT 315 SLIDE FEED WITH LOT OFF TOOLS
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-continuos workingwize\r\ncap. approx. 3.500 breads/h\r\naccessories: suction unit, conveyor (inside of \r\n                     the machine) for tins and bread \r\ncondition as it is CONTINUOS WORKINGWIZE\R\NCAP. APPROX. 3.500 BREADS/H\R\NACCESSORIES: SUCTION UNIT, CONVEYOR (INSIDE OF \R\N THE MACHINE) FOR TINS AND BREAD \R\NCONDITION AS IT IS
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-bench wood construction

format: 12 x 2,5 m with extract 3.4 m
hydraulic vertical standing
press unit in the direction of 12 m
weight approx. 2200 kg
built in 1985

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      

 BENCH WOOD CONSTRUCTION FORMAT: 12 X 2,5 M WITH EXTRACT 3.4 M HYDRAULIC VERTICAL STANDING PRESS UNIT IN THE DIRECTION OF 12 M WEIGHT APPROX. 2200 KG BUILT IN 1985 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-max. 80 kg flour, 2 speeds, 2 timers\r\n2 stainless steel bowls, protection device\r\ndoughhook stainless steel\r\ncomputersteuerung ungebraucht\r\n MAX. 80 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\N2 STAINLESS STEEL BOWLS, PROTECTION DEVICE\R\NDOUGHHOOK STAINLESS STEEL\R\NCOMPUTERSTEUERUNG UNGEBRAUCHT\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-l + z lathe hamlet can
b ac 04-03-120
shipping time: on request

number: 04-03-120

manufacturer: weiler
type: can b ac

machine data
year of construction: 2000
l x w x h: approx. 2600 x 1500 x 1500 mm
weight: 1500 kg

very good condition

technical data
digital display: 2 - axes - digital display

dimensions:
maximum turning diameter over bed: approx. ã? 380 mm
maximum turning diameter over support: approx. ã? 190 mm
maximum turning length: approx. 1000 mm
bar passage: approx. ã? 56 mm

spindle:
speed range: approx. 25-2000 rpm
spindle nose: d 1-8 camlock
power: approx. 7,5 kw

automatic longitudinal & plan vorschuebe:
longitudinal feed range: approximately 0.022 - 0.80 mm / rev
feed area plan: about 0.011 - 0.4 mm / rev

suitable for threads: - metric 0.30 mm-10 mm
"- 80-2 3/4 inch gg /"
-diametral - pitch thread 80-5.5 dp
-module 0.2-5

tailstock: mk 4

accessories
â?¢ 3 - bake - feed
â?¢ quick change toolpost + 1
â?¢ electric chuck guard
â?¢ work light
â?¢ coolant system
â?¢ complete machine documentation
â?¢ emergency
â?¢ drill chuck for tailstock new * optional *.
tailstock new tip â?¢ ongoing with * optional *.
â?¢ various wrenches
â?¢ machine feet * optional *.

other accessories on request
price and other specifications on request L + Z LATHE HAMLET CAN B AC 04-03-120 SHIPPING TIME: ON REQUEST NUMBER: 04-03-120 MANUFACTURER: WEILER TYPE: CAN B AC MACHINE DATA YEAR OF CONSTRUCTION: 2000 L X W X H: APPROX. 2600 X 1500 X 1500 MM WEIGHT: 1500 KG VERY GOOD CONDITION TECHNICAL DATA DIGITAL DISPLAY: 2 - AXES - DIGITAL DISPLAY DIMENSIONS: MAXIMUM TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 380 MM MAXIMUM TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 190 MM MAXIMUM TURNING LENGTH: APPROX. 1000 MM BAR PASSAGE: APPROX. &ATILDE;? 56 MM SPINDLE: SPEED RANGE: APPROX. 25-2000 RPM SPINDLE NOSE: D 1-8 CAMLOCK POWER: APPROX. 7,5 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: LONGITUDINAL FEED RANGE: APPROXIMATELY 0.022 - 0.80 MM / REV FEED AREA PLAN: ABOUT 0.011 - 0.4 MM / REV SUITABLE FOR THREADS: - METRIC 0.30 MM-10 MM "- 80-2 3/4 INCH GG /" -DIAMETRAL - PITCH THREAD 80-5.5 DP -MODULE 0.2-5 TAILSTOCK: MK 4 ACCESSORIES &ACIRC;?&CENT; 3 - BAKE - FEED &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 1 &ACIRC;?&CENT; ELECTRIC CHUCK GUARD &ACIRC;?&CENT; WORK LIGHT &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; EMERGENCY &ACIRC;?&CENT; DRILL CHUCK FOR TAILSTOCK NEW * OPTIONAL *. TAILSTOCK NEW TIP &ACIRC;?&CENT; ONGOING WITH * OPTIONAL *. &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; MACHINE FEET * OPTIONAL *. OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-with integrated crescent-roll-\r\nmachine with infeed conveyor and centering\r\ntype lwt 3/600  eb 2/200  40 j,\r\nfabr. kasper-universum, stainless steel\r\ncap. max. 2.500 pcs. /h, doughweight  15 to 250 g,\r\n(its an estimation - it depends from the dough, doughweight, worker)  \r\nmoulding machine working width 400 mm\r\nmachine with 2 moulding levels + 2 pressure plates\r\nmoulding belt 600 mm\r\nupper pressure plate   1000 x 585 mm\r\nbelow  pressure plate 1460 x 490 mm\r\nproduct range:  pretzels, beer sticks, salt sticks, baguettes, WITH INTEGRATED CRESCENT-ROLL-\R\NMACHINE WITH INFEED CONVEYOR AND CENTERING\R\NTYPE LWT 3/600 EB 2/200 40 J,\R\NFABR. KASPER-UNIVERSUM, STAINLESS STEEL\R\NCAP. MAX. 2.500 PCS. /H, DOUGHWEIGHT 15 TO 250 G,\R\N(ITS AN ESTIMATION - IT DEPENDS FROM THE DOUGH, DOUGHWEIGHT, WORKER) \R\NMOULDING MACHINE WORKING WIDTH 400 MM\R\NMACHINE WITH 2 MOULDING LEVELS + 2 PRESSURE PLATES\R\NMOULDING BELT 600 MM\R\NUPPER PRESSURE PLATE 1000 X 585 MM\R\NBELOW PRESSURE PLATE 1460 X 490 MM\R\NPRODUCT RANGE: PRETZELS, BEER STICKS, SALT STICKS, BAGUETTES,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 18.255 €
Ubicación: Land-for sale exclusively at 11:30 next march 2019 21 at our headquarters in bergamo
detailed list available, contact us for details and to schedule a viewing!
lifting equipment and shelving
electric trolley jughinrich
electric linkage pimespo mod. tl08 and taken 2,000 kg
toyota forklift 7fbest 15 of 2010 brought 1.5 q
om forklift 10 tons, 1990
nr. 2 2,000 pallet kg capacity

shelving and furniture
shelving
metal loft huni with scale
metal cabinets, bookcase in wood, leather and fabric chairs and armchairs
various cabinets
pcs and printers

cold rooms and pallets
positive full year 2008 cell rack, misa
negative cell year 1999
positive cell costan, year 1988
nr. 500 epal pallets
  FOR SALE EXCLUSIVELY AT 11:30 NEXT MARCH 2019 21 AT OUR HEADQUARTERS IN BERGAMO DETAILED LIST AVAILABLE, CONTACT US FOR DETAILS AND TO SCHEDULE A VIEWING! LIFTING EQUIPMENT AND SHELVING ELECTRIC TROLLEY JUGHINRICH ELECTRIC LINKAGE PIMESPO MOD. TL08 AND TAKEN 2,000 KG TOYOTA FORKLIFT 7FBEST 15 OF 2010 BROUGHT 1.5 Q OM FORKLIFT 10 TONS, 1990 NR. 2 2,000 PALLET KG CAPACITY SHELVING AND FURNITURE SHELVING METAL LOFT HUNI WITH SCALE METAL CABINETS, BOOKCASE IN WOOD, LEATHER AND FABRIC CHAIRS AND ARMCHAIRS VARIOUS CABINETS PCS AND PRINTERS COLD ROOMS AND PALLETS POSITIVE FULL YEAR 2008 CELL RACK, MISA NEGATIVE CELL YEAR 1999 POSITIVE CELL COSTAN, YEAR 1988 NR. 500 EPAL PALLETS
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-max. 100 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl, safety  device MAX. 100 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, SAFETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-type of machine: horizontal metal band saw machine.
manufacturer: kasto.
model: sbl 380 u.
year of construction: 1992.
condition: good,.
type of offer: used machine,
     ,.	
technical data:.
cutting area: 380 x 500 mm and Ø 380 mm,.
drive type: el / hydr.,.
drive: 3.0 kw.
comment:.
45° mitre.
continuously band speed control 19-100 m/min.
coolant system.
3 new spare belts.
weight: 550 kg.
     ,.
the machine is in a good shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: HORIZONTAL METAL BAND SAW MACHINE. MANUFACTURER: KASTO. MODEL: SBL 380 U. YEAR OF CONSTRUCTION: 1992. CONDITION: GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. CUTTING AREA: 380 X 500 MM AND Ø 380 MM,. DRIVE TYPE: EL / HYDR.,. DRIVE: 3.0 KW. COMMENT:. 45° MITRE. CONTINUOUSLY BAND SPEED CONTROL 19-100 M/MIN. COOLANT SYSTEM. 3 NEW SPARE BELTS. WEIGHT: 550 KG. ,. THE MACHINE IS IN A GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-max. 75 kg flour, 2 speeds, 2 timers\r\nstainless steel bowls + spiral, safety device\r\n MAX. 75 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWLS + SPIRAL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-table 1600 x 400 mm
tool holder iso 50
maximum travel distance x  1120 mm
max travel y  345 mm
max z vertical stroke 400 mm
maximum table load of 1500 kg
speed range 28-1400 rpm.
main drive 11 kw
connected power 14.5 kw
voltage 3 x 400 v / 50 hz
weight 3.85 t

new electrical cabinet flexiva in 2005
plc siemens s 7-300
horizontal milling spindle
vertical milling head aps ii f400
horizontal opposite support
coolant system  TABLE 1600 X 400 MM TOOL HOLDER ISO 50 MAXIMUM TRAVEL DISTANCE X 1120 MM MAX TRAVEL Y 345 MM MAX Z VERTICAL STROKE 400 MM MAXIMUM TABLE LOAD OF 1500 KG SPEED RANGE 28-1400 RPM. MAIN DRIVE 11 KW CONNECTED POWER 14.5 KW VOLTAGE 3 X 400 V / 50 HZ WEIGHT 3.85 T NEW ELECTRICAL CABINET FLEXIVA IN 2005 PLC SIEMENS S 7-300 HORIZONTAL MILLING SPINDLE VERTICAL MILLING HEAD APS II F400 HORIZONTAL OPPOSITE SUPPORT COOLANT SYSTEM
Vendedor: Norbert Gottwald Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-max. 125 kg flour, 2 speeds, 2 timers, \r\ninclude 2 moveable bowls stainless steel\r\nsafety device,\r\n MAX. 125 KG FLOUR, 2 SPEEDS, 2 TIMERS, \R\NINCLUDE 2 MOVEABLE BOWLS STAINLESS STEEL\R\NSAFETY DEVICE,\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-cross joint milling machine bar army ksf-2

used, good condition
incl. 1 milling tool
cutter feed continuously
length stop 1300 mm with motorized adjustment
machine work
incl. el. point 16 a

transport dimensions on ewp 1200 x 1200 x 1800, 500 kg

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: in stock 


 CROSS JOINT MILLING MACHINE BAR ARMY KSF-2 USED, GOOD CONDITION INCL. 1 MILLING TOOL CUTTER FEED CONTINUOUSLY LENGTH STOP 1300 MM WITH MOTORIZED ADJUSTMENT MACHINE WORK INCL. EL. POINT 16 A TRANSPORT DIMENSIONS ON EWP 1200 X 1200 X 1800, 500 KG HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-there are two identical saws available.  THERE ARE TWO IDENTICAL SAWS AVAILABLE.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-max. 30 kg flour, 2 speeds,  timer\r\nstainless steel bowls + spiral, safety device MAX. 30 KG FLOUR, 2 SPEEDS, TIMER\R\NSTAINLESS STEEL BOWLS + SPIRAL, SAFETY DEVICE
Vendedor: Thünnesen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)