53 ofertas

Año de construcción: usado
Ubicación: Land-vã?est-alpine lathe mod e 50 / 92 / 1000 x 280 ã? / ã? bed 570 / spindle bore 63 / up to 250 rpm / mk 5 / 15 kw / new monitor / accessories / good condition
colchester lathe of model 1250-60 cap. 89 / 4000 x 500 / spintzenhã¶he 225 / spindle ã? 118 / mk 6 / 6-1250 rev min / digital heidenhain / reitstã¶ck / accessories / good condition fe.gi.maschinen.sbg.at

vã?est-alpine lathe mod e 50 / year 92 / 1000 x 280 ã? / ã? over bed-570 / spindle up to 250 rpm bore 63 / mk 5 / 15 kw / new monitor / accessories / good condition
colchester lathe model 1250-60 cap / year 89 / 4000 x 500 / centre height 225 / 118 / mk 6 spindle ã? / 6-1250 rpm / digital heidenhain / reitstã¶ck / accessories / good condition
fe.gi.maschinen.sbg.a V�EST-ALPINE LATHE MOD E 50 / 92 / 1000 X 280 � / � BED 570 / SPINDLE BORE 63 / UP TO 250 RPM / MK 5 / 15 KW / NEW MONITOR / ACCESSORIES / GOOD CONDITION COLCHESTER LATHE OF MODEL 1250-60 CAP. 89 / 4000 X 500 / SPINTZENHöHE 225 / SPINDLE � 118 / MK 6 / 6-1250 REV MIN / DIGITAL HEIDENHAIN / REITSTöCK / ACCESSORIES / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT V�EST-ALPINE LATHE MOD E 50 / YEAR 92 / 1000 X 280 � / � OVER BED-570 / SPINDLE UP TO 250 RPM BORE 63 / MK 5 / 15 KW / NEW MONITOR / ACCESSORIES / GOOD CONDITION COLCHESTER LATHE MODEL 1250-60 CAP / YEAR 89 / 4000 X 500 / CENTRE HEIGHT 225 / 118 / MK 6 SPINDLE � / 6-1250 RPM / DIGITAL HEIDENHAIN / REITSTöCK / ACCESSORIES / GOOD CONDITION FE.GI.MASCHINEN.SBG.A
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-turning diameter: 810 mm<br/>turning length: 3000 mm<br/>turning diameter over slide: 510 mm<br/>turning dia. in gap: 880 mm<br/>control: siemens 850 t <br/>turning speeds: 1800 u/min<br/>drive motor: 27 kw<br/>spindle bore: 105 mm<br/>range l-w-h: 6,5 x 2,4 x 1,95 mm<br/>weight of the machine ca.: 6,5 t<br/>used teach in lathe with stabil construction<br/><br/>- 3- ja chuck forkardt Ø 400 mm<br/>- multifixhalter size c<br/>- machine light<br/>- chip conveyor<br/>- some jaws<br/>- some tool holder multifix<br/>- block for bore bars<br/>- machine feets<br/><br/><br/><br/><br/> TURNING DIAMETER: 810 MM
TURNING LENGTH: 3000 MM
TURNING DIAMETER OVER SLIDE: 510 MM
TURNING DIA. IN GAP: 880 MM
CONTROL: SIEMENS 850 T
TURNING SPEEDS: 1800 U/MIN
DRIVE MOTOR: 27 KW
SPINDLE BORE: 105 MM
RANGE L-W-H: 6,5 X 2,4 X 1,95 MM
WEIGHT OF THE MACHINE CA.: 6,5 T
USED TEACH IN LATHE WITH STABIL CONSTRUCTION

- 3- JA CHUCK FORKARDT Ø 400 MM
- MULTIFIXHALTER SIZE C
- MACHINE LIGHT
- CHIP CONVEYOR
- SOME JAWS
- SOME TOOL HOLDER MULTIFIX
- BLOCK FOR BORE BARS
- MACHINE FEETS




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land--drilling capacity: grey cast iron 40 mm / carbon steel 32 mm
-quill stroke: 180 mm
-spindle retainer: mk4
-speed: 20-3000 rpm
-transmission levels: 8
-maximum distance spindle/table: 890 mm (630 mm without extension)
-projection: 1000 mm
-drilling table size: 700 x 700 mm
-column diameter: 130 mm
-engine capacity: 1,6 kw
-dimensions wxhxd: ca. 800 x 2500 x 1900 mm
-weight: 940 kg -DRILLING CAPACITY: GREY CAST IRON 40 MM / CARBON STEEL 32 MM -QUILL STROKE: 180 MM -SPINDLE RETAINER: MK4 -SPEED: 20-3000 RPM -TRANSMISSION LEVELS: 8 -MAXIMUM DISTANCE SPINDLE/TABLE: 890 MM (630 MM WITHOUT EXTENSION) -PROJECTION: 1000 MM -DRILLING TABLE SIZE: 700 X 700 MM -COLUMN DIAMETER: 130 MM -ENGINE CAPACITY: 1,6 KW -DIMENSIONS WXHXD: CA. 800 X 2500 X 1900 MM -WEIGHT: 940 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Precio: used machinery auction RESALE 700 €
Ubicación: Land-weight approx.: 3200 kg<br/>control: sinumerik <br/>turning length: 1000 mm<br/>dimensions (l x w x h) approx.: 3500 x 2500 x 1700 mm<br/>description: - machine no.:03282101<br> - control: sinumerik<br> - centre height: 240 mm<br> - centre distance: 1000 mm<br> - turning length: 1000 mm<br> - max. circulation over bed: 490 mm<br> - max. circulation over cross slide: 195 mm<br> - max. circulation in the cranking: 520 mm<br> - length of crank: 210 mm<br> - max. workpiece weight: 1000 kg<br> - max. torque: 736 nm<br> - power output: 22 kw<br> - clamping: 3x 380 v<br> WEIGHT APPROX.: 3200 KG
CONTROL: SINUMERIK
TURNING LENGTH: 1000 MM
DIMENSIONS (L X W X H) APPROX.: 3500 X 2500 X 1700 MM
DESCRIPTION: - MACHINE NO.:03282101
- CONTROL: SINUMERIK
- CENTRE HEIGHT: 240 MM
- CENTRE DISTANCE: 1000 MM
- TURNING LENGTH: 1000 MM
- MAX. CIRCULATION OVER BED: 490 MM
- MAX. CIRCULATION OVER CROSS SLIDE: 195 MM
- MAX. CIRCULATION IN THE CRANKING: 520 MM
- LENGTH OF CRANK: 210 MM
- MAX. WORKPIECE WEIGHT: 1000 KG
- MAX. TORQUE: 736 NM
- POWER OUTPUT: 22 KW
- CLAMPING: 3X 380 V
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--4 - jaw chuck
-multi fix b
-removable bed
-engine brake
-fully operational
-bj. 1977

-centre distance: 1500 mm
-tip height: 260 mm
-turning diameter over bed: 520 mm
-swing over carriage: 380 mm
-quill recording: mk4
-spindle bore diameter: 48 mm
-bed width: 330 mm
-speeds: 18
-speed range: 21-1500 rpm
-feed range longitudinal slide: 0.068-3,805 mm
-metric threads: 0.5-28 mm
-inch thread: 1-56 tpi
-motor: 5 kw
-voltage: 400 v
-dimensions wxhxd: approx. 2700 x 1320 x 1100 mm
-weight: approx. 1500 kg -4 - JAW CHUCK -MULTI FIX B -REMOVABLE BED -ENGINE BRAKE -FULLY OPERATIONAL -BJ. 1977 -CENTRE DISTANCE: 1500 MM -TIP HEIGHT: 260 MM -TURNING DIAMETER OVER BED: 520 MM -SWING OVER CARRIAGE: 380 MM -QUILL RECORDING: MK4 -SPINDLE BORE DIAMETER: 48 MM -BED WIDTH: 330 MM -SPEEDS: 18 -SPEED RANGE: 21-1500 RPM -FEED RANGE LONGITUDINAL SLIDE: 0.068-3,805 MM -METRIC THREADS: 0.5-28 MM -INCH THREAD: 1-56 TPI -MOTOR: 5 KW -VOLTAGE: 400 V -DIMENSIONS WXHXD: APPROX. 2700 X 1320 X 1100 MM -WEIGHT: APPROX. 1500 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Precio: 14.700 €
Ubicación: Land-: 8 mm<br/>: 500 - 3.150 mm<br/>: 6 mm<br/>: 8 mm<br/>: 1.000 mm<br/>: 1.000 mm<br/>: 300 mm<br/>: 22 kw<br/>: 3.725 mm<br/>: 2.765 mm<br/>: 1.840 mm<br/>: 10.000 kg<br/>swing beam guillotine shear<br/>mot. back gauge<br/>cutting length continuously variable<br/>1 side lay<br/>4 sheet support arms<br/>manual cutting gap adjustment<br/>cutting line illumination<br/>14. pcs. hyd. hold down clamps<br/>stroke-pce. counter<br/>stroke counter<br/>operating hours counter<br/>foot pedal<br/>blades turned<br/>no users manual<br/><br/>does not comply with the present industrial safety regulation (amvo &, uvv)<br/><br/>cutting capacity: 8 mm<br/>cutting length continuously variable: 500 - 3.150 mm<br/>cutting capacity st60: 6 mm<br/>cutting capacity st37: 8 mm<br/>back gauge mot.: 1.000 mm<br/>side lay: 1.000 mm<br/>throat depth: 300 mm<br/>cutting angle: 1°30´<br/>stroke at full cutting length: 21 1/min.<br/>man. cutting gap adjustment: 0,05-0,8 mm<br/>motor: 22 kw<br/>length: 3.725 mm  <br/>width: 2.765 mm<br/>heigth: 1.840 mm<br/>weight: 10.000 kg<br/><br/><br/><br/> : 8 MM
: 500 - 3.150 MM
: 6 MM
: 8 MM
: 1.000 MM
: 1.000 MM
: 300 MM
: 22 KW
: 3.725 MM
: 2.765 MM
: 1.840 MM
: 10.000 KG
SWING BEAM GUILLOTINE SHEAR
MOT. BACK GAUGE
CUTTING LENGTH CONTINUOUSLY VARIABLE
1 SIDE LAY
4 SHEET SUPPORT ARMS
MANUAL CUTTING GAP ADJUSTMENT
CUTTING LINE ILLUMINATION
14. PCS. HYD. HOLD DOWN CLAMPS
STROKE-PCE. COUNTER
STROKE COUNTER
OPERATING HOURS COUNTER
FOOT PEDAL
BLADES TURNED
NO USERS MANUAL

DOES NOT COMPLY WITH THE PRESENT INDUSTRIAL SAFETY REGULATION (AMVO &, UVV)

CUTTING CAPACITY: 8 MM
CUTTING LENGTH CONTINUOUSLY VARIABLE: 500 - 3.150 MM
CUTTING CAPACITY ST60: 6 MM
CUTTING CAPACITY ST37: 8 MM
BACK GAUGE MOT.: 1.000 MM
SIDE LAY: 1.000 MM
THROAT DEPTH: 300 MM
CUTTING ANGLE: 1°30´
STROKE AT FULL CUTTING LENGTH: 21 1/MIN.
MAN. CUTTING GAP ADJUSTMENT: 0,05-0,8 MM
MOTOR: 22 KW
LENGTH: 3.725 MM
WIDTH: 2.765 MM
HEIGTH: 1.840 MM
WEIGHT: 10.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-thickness: 10 mm
sheet strength: 420 n/mm2
elongation at break: 28%
cutting length: 3150 mm
be seam thickness: 11 mm
be hem width: 50 mm
upper knife all-in-one: 3260 mm
bottom blade multipart: 3250 mm
throat depth: 300 mm
cutting angle: 1.5 â°
number of strokes i = 3150 mm: 18 / min
stroke rate = 500 mm: 37 / min
cutting-length adjustment: 500-3150 mm
velocity adjustment range: 0-1000 mm
lower holder number: 14
main motor: 30 kw
dimensions wxhxd: 3500 x 2050 x 2550 mm
weight: 12000 kg
 THICKNESS: 10 MM SHEET STRENGTH: 420 N/MM2 ELONGATION AT BREAK: 28% CUTTING LENGTH: 3150 MM BE SEAM THICKNESS: 11 MM BE HEM WIDTH: 50 MM UPPER KNIFE ALL-IN-ONE: 3260 MM BOTTOM BLADE MULTIPART: 3250 MM THROAT DEPTH: 300 MM CUTTING ANGLE: 1.5 &ACIRC;&DEG; NUMBER OF STROKES I = 3150 MM: 18 / MIN STROKE RATE = 500 MM: 37 / MIN CUTTING-LENGTH ADJUSTMENT: 500-3150 MM VELOCITY ADJUSTMENT RANGE: 0-1000 MM LOWER HOLDER NUMBER: 14 MAIN MOTOR: 30 KW DIMENSIONS WXHXD: 3500 X 2050 X 2550 MM WEIGHT: 12000 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Precio: 4.000 €
Ubicación: Land-: 3.050 mm<br/>: 125 to<br/>: 2.550 mm<br/>: 300 mm<br/>: 200 mm<br/>: 100 mm<br/>: 500 mm<br/>: 390 mm<br/>: 180 mm<br/>: 160 mm<br/>: 11 kw<br/>: 3.210 mm<br/>: 1.500 mm<br/>: 2.400 mm<br/>: 8.000 kg<br/>2 mech. stop fingers<br/>anti deflection mechanism by chock<br/>2 sheet support arms<br/>stroke stop display<br/>goose neck upper tool 105 x 30 x 3.000 mm<br/>multi-v lower tool 105 x 100 x 3.000 mm, with 6 v shaped slots<br/>manual back gauge<br/>users manual in german<br/><br/>(sample photo)<br/> <br/>does not comply with the present industrial safety regulation (amvo &, uvv)<br/><br/><br/>maschine necessary to be repaired, with following fault: <br/>synchronisation valve defective,  only approx. 30 mm stroke possible<br/><br/>bending length: 3.050 mm<br/>bending force: 125 to<br/>distance between columns: 2.550 mm<br/>gap: 300 mm<br/>stroke: 200 mm<br/>max. stroke adjustment: 100 mm<br/>man. back gauge: 500 mm<br/>daylight opening: 390 mm<br/>table width: 180 mm<br/>stop fingers height adjustable: 160 mm<br/>speeds of upper beam: 100/7/100 mm/sek<br/>motor power: 11 kw<br/>length: 3.210 mm<br/>width: 1.500 mm<br/>heigth: 2.400 mm<br/>weight: 8.000 kg<br/><br/><br/><br/> : 3.050 MM
: 125 TO
: 2.550 MM
: 300 MM
: 200 MM
: 100 MM
: 500 MM
: 390 MM
: 180 MM
: 160 MM
: 11 KW
: 3.210 MM
: 1.500 MM
: 2.400 MM
: 8.000 KG
2 MECH. STOP FINGERS
ANTI DEFLECTION MECHANISM BY CHOCK
2 SHEET SUPPORT ARMS
STROKE STOP DISPLAY
GOOSE NECK UPPER TOOL 105 X 30 X 3.000 MM
MULTI-V LOWER TOOL 105 X 100 X 3.000 MM, WITH 6 V SHAPED SLOTS
MANUAL BACK GAUGE
USERS MANUAL IN GERMAN

(SAMPLE PHOTO)

DOES NOT COMPLY WITH THE PRESENT INDUSTRIAL SAFETY REGULATION (AMVO &, UVV)


MASCHINE NECESSARY TO BE REPAIRED, WITH FOLLOWING FAULT: 
SYNCHRONISATION VALVE DEFECTIVE,  ONLY APPROX. 30 MM STROKE POSSIBLE

BENDING LENGTH: 3.050 MM
BENDING FORCE: 125 TO
DISTANCE BETWEEN COLUMNS: 2.550 MM
GAP: 300 MM
STROKE: 200 MM
MAX. STROKE ADJUSTMENT: 100 MM
MAN. BACK GAUGE: 500 MM
DAYLIGHT OPENING: 390 MM
TABLE WIDTH: 180 MM
STOP FINGERS HEIGHT ADJUSTABLE: 160 MM
SPEEDS OF UPPER BEAM: 100/7/100 MM/SEK
MOTOR POWER: 11 KW
LENGTH: 3.210 MM
WIDTH: 1.500 MM
HEIGTH: 2.400 MM
WEIGHT: 8.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-top width 800 mm
tip height a.s.l. bed 180 mm
circulation ã? above bed 380 mm
circulation ã? above slide 200 mm
spindle hole 52 mm
speed range 33-1.500 u/min

accessories:
3 bake forkardt chucks ã? 200 mm
digital display of the axes
coolant system
spindle safety cover
tailstock
multifix tool holder dimensions: (lxwxh) 0.95 m x 2.00 m x 1.38 m
weight approx. 1,2 t

the fixators are not part of the sale. TOP WIDTH 800 MM TIP HEIGHT A.S.L. BED 180 MM CIRCULATION &ATILDE;? ABOVE BED 380 MM CIRCULATION &ATILDE;? ABOVE SLIDE 200 MM SPINDLE HOLE 52 MM SPEED RANGE 33-1.500 U/MIN ACCESSORIES: 3 BAKE FORKARDT CHUCKS &ATILDE;? 200 MM DIGITAL DISPLAY OF THE AXES COOLANT SYSTEM SPINDLE SAFETY COVER TAILSTOCK MULTIFIX TOOL HOLDER DIMENSIONS: (LXWXH) 0.95 M X 2.00 M X 1.38 M WEIGHT APPROX. 1,2 T THE FIXATORS ARE NOT PART OF THE SALE.
Vendedor: KW Maschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 13.500 €
Ubicación: Land-weight approx.: 14000 kg<br/>turning diameter: 540 mm<br/>control: sinumeric 880t <br/>turning length: 1000 mm<br/>dimensions (l x w x h) approx.: 6300 x 3400 x 2700 mm<br/>number of controlled axles: 6 <br/>rapid travel range: 15 m/min<br/>spindle bore: 115 / vorne 160 mm<br/>tool taper: sk 40 din 69871-a40 <br/>total power requirement: 75 kw<br/>description: this is a 6-axis machine<br> turning-drilling and milling unit: sk 40 tool system, c and y axis<br> chuck, chip conveyor, 12-fold turret, 3d interpolation<br> contour short description<br> machine is suitable for complete machining<br> <br> - machine no .: 08538901<br> - turning diameter: 540 mm<br> - turning length: 1000 mm<br> - control: siemens sinumeric 880t<br> - drive power: 37 kw<br> - speed: 8 - 3148 rpm<br> - swing over slide: 450 mm<br> - swing over bed: 540 mm<br> - tool holder: sk 40 din 69871-a40<br> - tool magazine: 24-fold<br> - spindle diameter in the front bearing: 160 mm<br> - spindle bore: 115 mm<br> - z-axis: 1411 mm<br> - x-axis: 380 mm<br> - e-axis: 560 mm<br> - max torque at the spindl: 1520<br> - feed range: 0 - 10,000 mm / min<br> - rapid traverse: 15 m / min<br> - feed force longitudinal: 16,500 n<br> - feed force plan: 11,000 n<br> - drive milling spindle: 15,00 kw<br> - speed range - milling: 0 - 3000 rpm<br> - b-axis: 180 x 0.01 °<br> - y axis: 300 mm<br> - quill stroke: 160 mm<br> - quill diameter: 140 mm<br> - quill force: 3000 - 12000 n<br> - quill cone: mk<br> WEIGHT APPROX.: 14000 KG
TURNING DIAMETER: 540 MM
CONTROL: SINUMERIC 880T
TURNING LENGTH: 1000 MM
DIMENSIONS (L X W X H) APPROX.: 6300 X 3400 X 2700 MM
NUMBER OF CONTROLLED AXLES: 6
RAPID TRAVEL RANGE: 15 M/MIN
SPINDLE BORE: 115 / VORNE 160 MM
TOOL TAPER: SK 40 DIN 69871-A40
TOTAL POWER REQUIREMENT: 75 KW
DESCRIPTION: THIS IS A 6-AXIS MACHINE
TURNING-DRILLING AND MILLING UNIT: SK 40 TOOL SYSTEM, C AND Y AXIS
CHUCK, CHIP CONVEYOR, 12-FOLD TURRET, 3D INTERPOLATION
CONTOUR SHORT DESCRIPTION
MACHINE IS SUITABLE FOR COMPLETE MACHINING

- MACHINE NO .: 08538901
- TURNING DIAMETER: 540 MM
- TURNING LENGTH: 1000 MM
- CONTROL: SIEMENS SINUMERIC 880T
- DRIVE POWER: 37 KW
- SPEED: 8 - 3148 RPM
- SWING OVER SLIDE: 450 MM
- SWING OVER BED: 540 MM
- TOOL HOLDER: SK 40 DIN 69871-A40
- TOOL MAGAZINE: 24-FOLD
- SPINDLE DIAMETER IN THE FRONT BEARING: 160 MM
- SPINDLE BORE: 115 MM
- Z-AXIS: 1411 MM
- X-AXIS: 380 MM
- E-AXIS: 560 MM
- MAX TORQUE AT THE SPINDL: 1520
- FEED RANGE: 0 - 10,000 MM / MIN
- RAPID TRAVERSE: 15 M / MIN
- FEED FORCE LONGITUDINAL: 16,500 N
- FEED FORCE PLAN: 11,000 N
- DRIVE MILLING SPINDLE: 15,00 KW
- SPEED RANGE - MILLING: 0 - 3000 RPM
- B-AXIS: 180 X 0.01 °
- Y AXIS: 300 MM
- QUILL STROKE: 160 MM
- QUILL DIAMETER: 140 MM
- QUILL FORCE: 3000 - 12000 N
- QUILL CONE: MK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-maximum working width 3150 mm - max cutting capacity st 40 13 mm
	-radius 300 mm
	-strokes at full cutting length 18 per/min
	-mot. backgauge with position indicator 10 â?? 1000 mm
-hair length setting 500-3150 mm
-angle - manual adjustment of the cutting gap
-14 pcs hydraulic hold-down device
-front angle hinges left + right
-3 pcs front support arms
	-drive 400 v / 28 kw
	-footswitch - space without support arms about 	           b 4250 x h 2100 x 2450 mm
	-weight approx.				            16600 kg
 TECHNICAL DATA: -MAXIMUM WORKING WIDTH 3150 MM - MAX CUTTING CAPACITY ST 40 13 MM -RADIUS 300 MM -STROKES AT FULL CUTTING LENGTH 18 PER/MIN -MOT. BACKGAUGE WITH POSITION INDICATOR 10 &ACIRC;?? 1000 MM -HAIR LENGTH SETTING 500-3150 MM -ANGLE - MANUAL ADJUSTMENT OF THE CUTTING GAP -14 PCS HYDRAULIC HOLD-DOWN DEVICE -FRONT ANGLE HINGES LEFT + RIGHT -3 PCS FRONT SUPPORT ARMS -DRIVE 400 V / 28 KW -FOOTSWITCH - SPACE WITHOUT SUPPORT ARMS ABOUT B 4250 X H 2100 X 2450 MM -WEIGHT APPROX. 16600 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-: 6 mm<br/>: 500 - 3.150 mm<br/>: 5 mm<br/>: 6 mm<br/>: 1.000 mm<br/>: 1.000 mm<br/>: 200 mm<br/>: 170 l<br/>: 14,7 kw<br/>: 3.725 mm<br/>: 2.115 mm<br/>: 1.840 mm<br/>: 8.000 kg<br/>swing beam guillotine shear<br/>mot. back gauge<br/>cutting length continuously variable<br/>4 balls in table<br/>1 side lay<br/>4 sheet support arms<br/>manual cutting gap adjustment<br/>cutting line illumination<br/>14. pcs. hyd. hold down clamps<br/>stroke-pce. counter<br/>stroke counter<br/>operating hours counter<br/>foot pedal<br/>blades turned<br/>no users manual<br/><br/>does not comply with the present industrial safety regulation (amvo &, uvv)<br/><br/>cutting capacity: 6 mm<br/>cutting length continuously variable: 500 - 3.150 mm<br/>cutting capacity st60: 5 mm<br/>cutting capacity st37: 6 mm<br/>back gauge mot.: 1.000 mm<br/>side lay: 1.000 mm<br/>throat depth: 200 mm<br/>cutting angle: 1°30´<br/>stroke at full cutting length: 21 1/min.<br/>oil filling: 170 l<br/>motor: 14,7 kw<br/>length: 3.725 mm  <br/>width: 2.115 mm<br/>heigth: 1.840 mm<br/>weight: 8.000 kg<br/><br/><br/><br/> : 6 MM
: 500 - 3.150 MM
: 5 MM
: 6 MM
: 1.000 MM
: 1.000 MM
: 200 MM
: 170 L
: 14,7 KW
: 3.725 MM
: 2.115 MM
: 1.840 MM
: 8.000 KG
SWING BEAM GUILLOTINE SHEAR
MOT. BACK GAUGE
CUTTING LENGTH CONTINUOUSLY VARIABLE
4 BALLS IN TABLE
1 SIDE LAY
4 SHEET SUPPORT ARMS
MANUAL CUTTING GAP ADJUSTMENT
CUTTING LINE ILLUMINATION
14. PCS. HYD. HOLD DOWN CLAMPS
STROKE-PCE. COUNTER
STROKE COUNTER
OPERATING HOURS COUNTER
FOOT PEDAL
BLADES TURNED
NO USERS MANUAL

DOES NOT COMPLY WITH THE PRESENT INDUSTRIAL SAFETY REGULATION (AMVO &, UVV)

CUTTING CAPACITY: 6 MM
CUTTING LENGTH CONTINUOUSLY VARIABLE: 500 - 3.150 MM
CUTTING CAPACITY ST60: 5 MM
CUTTING CAPACITY ST37: 6 MM
BACK GAUGE MOT.: 1.000 MM
SIDE LAY: 1.000 MM
THROAT DEPTH: 200 MM
CUTTING ANGLE: 1°30´
STROKE AT FULL CUTTING LENGTH: 21 1/MIN.
OIL FILLING: 170 L
MOTOR: 14,7 KW
LENGTH: 3.725 MM
WIDTH: 2.115 MM
HEIGTH: 1.840 MM
WEIGHT: 8.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:

-tip height 180 mm
-top width 1000 mm
-largest circulation - ã? bed / cross slide about 350 / 200 mm
-traverse path of cross slide around		  		  200 mm
-spindle carrier according to din 55022
-spindle bore 52 mm
-taper of tailstock quill mk 3
-the tailstock quill travel 120 mm
-12 spindle speeds 44-2000 rpm
-adjustable spindle brake
-feeds - along 0,072 - 0.54 mm / rev
			-plan 0.036 - 0.27 mm / rev
-feed + speed
-metric thread pitches 0.4-5.6 mm
-inch thread 46-4 tpi
-module thread 0,25-1,75 module
-diametral pitsch thread 92-14 dp
-drive 400 v / 5,5 kw
-with:-digital display heidenhain
-chip tray, 3 - jaw chuck, - sws steel holder with inserts, lighting
	-space requirement approx.	         b 1950 x h t 1450 x 950 mm
-weight approx.					  750 kg	
 TECHNICAL DATA: -TIP HEIGHT 180 MM -TOP WIDTH 1000 MM -LARGEST CIRCULATION - &ATILDE;? BED / CROSS SLIDE ABOUT 350 / 200 MM -TRAVERSE PATH OF CROSS SLIDE AROUND 200 MM -SPINDLE CARRIER ACCORDING TO DIN 55022 -SPINDLE BORE 52 MM -TAPER OF TAILSTOCK QUILL MK 3 -THE TAILSTOCK QUILL TRAVEL 120 MM -12 SPINDLE SPEEDS 44-2000 RPM -ADJUSTABLE SPINDLE BRAKE -FEEDS - ALONG 0,072 - 0.54 MM / REV -PLAN 0.036 - 0.27 MM / REV -FEED + SPEED -METRIC THREAD PITCHES 0.4-5.6 MM -INCH THREAD 46-4 TPI -MODULE THREAD 0,25-1,75 MODULE -DIAMETRAL PITSCH THREAD 92-14 DP -DRIVE 400 V / 5,5 KW -WITH:-DIGITAL DISPLAY HEIDENHAIN -CHIP TRAY, 3 - JAW CHUCK, - SWS STEEL HOLDER WITH INSERTS, LIGHTING -SPACE REQUIREMENT APPROX. B 1950 X H T 1450 X 950 MM -WEIGHT APPROX. 750 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-17,5 to; power [ps]: 157; gross weight [kg]: 17340; engine: man 17,5 TO; POWER [PS]: 157; GROSS WEIGHT [KG]: 17340; ENGINE: MAN
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-drilling capacity in steel (diameter): 25 mm throat depth: 1000 mm spindle mount mt: 3 table size: 800 x 1120 mm speed: 20-3000 rpm feed: 0.05; 0.1 and 0.2 mm weight: approx. 700 kg space requirement: 1800 x 850 x 2200 mm 
 DRILLING CAPACITY IN STEEL (DIAMETER): 25 MM THROAT DEPTH: 1000 MM SPINDLE MOUNT MT: 3 TABLE SIZE: 800 X 1120 MM SPEED: 20-3000 RPM FEED: 0.05; 0.1 AND 0.2 MM WEIGHT: APPROX. 700 KG SPACE REQUIREMENT: 1800 X 850 X 2200 MM
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 500 mm<br/>turning diameter over slide rest: 320 mm<br/>turning length: 1000 mm<br/>centre height: 250 mm<br/>spindle passage: 48 mm<br/>speeds: 33 - 1500 u/min<br/>engine output: 5,5 kw<br/>weight of the machine ca.: 1,5 t<br/>dimensions of the machine ca.: 2,6 x 1,0 x 1,6 m<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 500 MM
TURNING DIAMETER OVER SLIDE REST: 320 MM
TURNING LENGTH: 1000 MM
CENTRE HEIGHT: 250 MM
SPINDLE PASSAGE: 48 MM
SPEEDS: 33 - 1500 U/MIN
ENGINE OUTPUT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 1,5 T
DIMENSIONS OF THE MACHINE CA.: 2,6 X 1,0 X 1,6 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-tip height: 455 mm
centre distance: 3000 mmm
spindle passage: 127 mm
bed width: 600 mm
speeds: (24) 9-1120 rpm
engine power: 30 kw
weight: approx. 9000 kg

facilities:
2-axis digital display heidenhain
-motorized upper carriage to the taper turning
-3-jaw lathe chuck
-quick-change holder system multifunction fixed size d with a holder
-rotary chuck guard - coolant system
-removable chip pan (dismantled)
-splash back wall (dismantled)
-2 emergency off pushbutton in the working area
-fixed bezel (dismantled)
-machine lamp
-running centering cone

machine in top condition. TIP HEIGHT: 455 MM CENTRE DISTANCE: 3000 MMM SPINDLE PASSAGE: 127 MM BED WIDTH: 600 MM SPEEDS: (24) 9-1120 RPM ENGINE POWER: 30 KW WEIGHT: APPROX. 9000 KG FACILITIES: 2-AXIS DIGITAL DISPLAY HEIDENHAIN -MOTORIZED UPPER CARRIAGE TO THE TAPER TURNING -3-JAW LATHE CHUCK -QUICK-CHANGE HOLDER SYSTEM MULTIFUNCTION FIXED SIZE D WITH A HOLDER -ROTARY CHUCK GUARD - COOLANT SYSTEM -REMOVABLE CHIP PAN (DISMANTLED) -SPLASH BACK WALL (DISMANTLED) -2 EMERGENCY OFF PUSHBUTTON IN THE WORKING AREA -FIXED BEZEL (DISMANTLED) -MACHINE LAMP -RUNNING CENTERING CONE MACHINE IN TOP CONDITION.
Vendedor: Weber Werkzeugmaschinen GbR
Año de construcción: usado
Ubicación: Land-centre height: 240 mm<br/>distance between center: 1000 mm<br/>control: siemens <br/>greates pass round over bed: 490 mm<br/>swing diameter face slide: 195 mm<br/>throat: 520 mm<br/>spindle cone mt: 6 ( innenkegel 70) <br/>spindle diameter in front bearing: 100 mm<br/>spindle bore: 63 mm<br/>torque: 736 nm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> CENTRE HEIGHT: 240 MM
DISTANCE BETWEEN CENTER: 1000 MM
CONTROL: SIEMENS
GREATES PASS ROUND OVER BED: 490 MM
SWING DIAMETER FACE SLIDE: 195 MM
THROAT: 520 MM
SPINDLE CONE MT: 6 ( INNENKEGEL 70)
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
SPINDLE BORE: 63 MM
TORQUE: 736 NM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Aleman Machines e.K.
Año de construcción: usado
Ubicación: Land-plasma cutting machine cnc-portal
manufacturer: esab type: suprarex sxe-p 5500
year of construction: 2001

l/b (table) work area: 3000 x 12,000 mm
3 oxy-fuel burner with single ignition
6 burner with strip burner possible extension
cutting capacity: 3-300 mm
rotating 3-burner unit for welding edge preparation
1 plasma burner with hypertherm max 200
marking device with arc (arc marker)
extraction: cyclone fa. voest
 PLASMA CUTTING MACHINE CNC-PORTAL MANUFACTURER: ESAB TYPE: SUPRAREX SXE-P 5500 YEAR OF CONSTRUCTION: 2001 L/B (TABLE) WORK AREA: 3000 X 12,000 MM 3 OXY-FUEL BURNER WITH SINGLE IGNITION 6 BURNER WITH STRIP BURNER POSSIBLE EXTENSION CUTTING CAPACITY: 3-300 MM ROTATING 3-BURNER UNIT FOR WELDING EDGE PREPARATION 1 PLASMA BURNER WITH HYPERTHERM MAX 200 MARKING DEVICE WITH ARC (ARC MARKER) EXTRACTION: CYCLONE FA. VOEST
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: max. 570 mm<br/>turning length: 1000 mm<br/>swing diameter over face slide: 340 mm<br/>greates pass round over bed: 570 mm<br/>turning speed range - main spindle: 1 - 2500 min/-1<br/>power capacity - main spindel: 11 kw<br/>spindle bore: 63 mm<br/>diameter of quill: 70 mm<br/>taper of center: mk 5 <br/>quill stroke: 160 mm<br/>dimensions (lxwxh): 3,0 x 1,8 x 1,8 <br/>total power requirement: 15 kva<br/>weight of the machine ca.: 3,0 t<br/>lathe cycle controled<br/>vdf boehringer - dus 560 / 3000<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 570 MM
TURNING LENGTH: 1000 MM
SWING DIAMETER OVER FACE SLIDE: 340 MM
GREATES PASS ROUND OVER BED: 570 MM
TURNING SPEED RANGE - MAIN SPINDLE: 1 - 2500 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 11 KW
SPINDLE BORE: 63 MM
DIAMETER OF QUILL: 70 MM
TAPER OF CENTER: MK 5
QUILL STROKE: 160 MM
DIMENSIONS (LXWXH): 3,0 X 1,8 X 1,8
TOTAL POWER REQUIREMENT: 15 KVA
WEIGHT OF THE MACHINE CA.: 3,0 T
LATHE CYCLE CONTROLED
VDF BOEHRINGER - DUS 560 / 3000




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-voest alpine bt8x2500 - plate shear

sheet thickness: 8 mm cutting length: 2500 mm throat depth: 400 mm stroke rate: 21 / min main motor: 7,5 kw dimensions wxhxd: approx. 3100 x 2300 x 2500 mm weight: approx. 8000 kg  VOEST ALPINE BT8X2500 - PLATE SHEAR SHEET THICKNESS: 8 MM CUTTING LENGTH: 2500 MM THROAT DEPTH: 400 MM STROKE RATE: 21 / MIN MAIN MOTOR: 7,5 KW DIMENSIONS WXHXD: APPROX. 3100 X 2300 X 2500 MM WEIGHT: APPROX. 8000 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-turning diameter: 570 mm<br/>turning length: 1100 mm<br/>control: elesta-visulesta 4<br/>turning diameter in the gap: 600 mm<br/>turning dia. over face-slide: 340 mm<br/>spindle bore: 63 mm<br/>spindle turning speed range: 1 - 2500 u/min<br/>feeds - longitudinal: 0,001 - 3 mm/u<br/>feeds - cross: 0,001 - 3 mm/u<br/>rapid traverse longitudinal: 7 m/min<br/>rapid traverse cross: 3,5 m/min<br/>thread - mm pitch: 0,5 - 140 mm<br/>thread - inch: 1/4 - 56 gang/ inch.<br/>thread - module: 0,125 - 28 mm<br/>coolant tank: 400 l<br/>workpiece weight: 1000 kg<br/>main drive: 12,9 kw<br/>total power requirement: 20 kw<br/>weight of the machine ca.: 3,2 t<br/>dimensions of the machine ca.: 3,0 x 1,65 x 1,75 m<br/>controll elesta model visullesta 4, for cone turning, contour turning and <br/>threat cutting. machine has parat toolholder system, steady and 3 jaw chuck.<br/><br/><br/><br/><br/> TURNING DIAMETER: 570 MM
TURNING LENGTH: 1100 MM
CONTROL: ELESTA-VISULESTA 4
TURNING DIAMETER IN THE GAP: 600 MM
TURNING DIA. OVER FACE-SLIDE: 340 MM
SPINDLE BORE: 63 MM
SPINDLE TURNING SPEED RANGE: 1 - 2500 U/MIN
FEEDS - LONGITUDINAL: 0,001 - 3 MM/U
FEEDS - CROSS: 0,001 - 3 MM/U
RAPID TRAVERSE LONGITUDINAL: 7 M/MIN
RAPID TRAVERSE CROSS: 3,5 M/MIN
THREAD - MM PITCH: 0,5 - 140 MM
THREAD - INCH: 1/4 - 56 GANG/ INCH.
THREAD - MODULE: 0,125 - 28 MM
COOLANT TANK: 400 L
WORKPIECE WEIGHT: 1000 KG
MAIN DRIVE: 12,9 KW
TOTAL POWER REQUIREMENT: 20 KW
WEIGHT OF THE MACHINE CA.: 3,2 T
DIMENSIONS OF THE MACHINE CA.: 3,0 X 1,65 X 1,75 M
CONTROLL ELESTA MODEL VISULLESTA 4, FOR CONE TURNING, CONTOUR TURNING AND
THREAT CUTTING. MACHINE HAS PARAT TOOLHOLDER SYSTEM, STEADY AND 3 JAW CHUCK.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-max. swing: 570mm, max. turning diameter: 340mm, max. workpiece length: 1000mm, max. workpiece weight: 1t, rotational speed: 1-2500/min, center height: 280mm, center width: 2000mm, quill stroke: 160mm, quill diamter: 70mm, spindle opening: 63mm, length: 2700mm, width: 1700mm, height: 1800mm, weight: 2.8t. MAX. SWING: 570MM, MAX. TURNING DIAMETER: 340MM, MAX. WORKPIECE LENGTH: 1000MM, MAX. WORKPIECE WEIGHT: 1T, ROTATIONAL SPEED: 1-2500/MIN, CENTER HEIGHT: 280MM, CENTER WIDTH: 2000MM, QUILL STROKE: 160MM, QUILL DIAMTER: 70MM, SPINDLE OPENING: 63MM, LENGTH: 2700MM, WIDTH: 1700MM, HEIGHT: 1800MM, WEIGHT: 2.8T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 750 mm<br/>turning length: 2000 mm<br/>control: siemens sinumerik 850<br/>turning diameter over slide: 670 mm<br/>turning diameter over bed: 750 mm<br/>main spindle bore: 160 mm<br/>chuck diameter: 620 mm<br/>steady: 50-200 mm<br/>total power requirement: 75 kw<br/>weight of the machine ca.: 20 t<br/>dimensions of the machine ca.: 8x5x4,5 m<br/>disc turret: 9 tools<br/>8 boring bars in the magazine (max. d 80x835 mm)<br/>24 drilling and milling tools in the drum turret (sk 40)<br/><br/>operating hours: approx. 80,000 operating hours<br/>driven tools: 24 incl<br/>accessories: various spare parts (for example cover plates), turning <br/>tools,forage, baking<br/><br/><br/><br/><br/> TURNING DIAMETER: 750 MM
TURNING LENGTH: 2000 MM
CONTROL: SIEMENS SINUMERIK 850
TURNING DIAMETER OVER SLIDE: 670 MM
TURNING DIAMETER OVER BED: 750 MM
MAIN SPINDLE BORE: 160 MM
CHUCK DIAMETER: 620 MM
STEADY: 50-200 MM
TOTAL POWER REQUIREMENT: 75 KW
WEIGHT OF THE MACHINE CA.: 20 T
DIMENSIONS OF THE MACHINE CA.: 8X5X4,5 M
DISC TURRET: 9 TOOLS
8 BORING BARS IN THE MAGAZINE (MAX. D 80X835 MM)
24 DRILLING AND MILLING TOOLS IN THE DRUM TURRET (SK 40)

OPERATING HOURS: APPROX. 80,000 OPERATING HOURS
DRIVEN TOOLS: 24 INCL
ACCESSORIES: VARIOUS SPARE PARTS (FOR EXAMPLE COVER PLATES), TURNING
TOOLS,FORAGE, BAKING




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-built in 1990<br/>  uddin überbettschlitten 540 mm<br/>  circulation over cross slide 450 mm<br/>  maximum turning length 1000 mm<br/>  maximum workpiece weight 1250 g<br/>  spindle bore 77 mm<br/>  2 revolver<br/>  forkardt feed 315 mm, size 8<br/>  connection value 65 kva<br/>  weight 8000 kg<br/>  <br/>  chip conveyor<br/>  <br/>  the machine comes from an operating sau rafts. a besichtigunmg power is not possible, because the machine at a forwarding agent is stored. BUILT IN 1990
UDDIN üBERBETTSCHLITTEN 540 MM
CIRCULATION OVER CROSS SLIDE 450 MM
MAXIMUM TURNING LENGTH 1000 MM
MAXIMUM WORKPIECE WEIGHT 1250 G
SPINDLE BORE 77 MM
2 REVOLVER
FORKARDT FEED 315 MM, SIZE 8
CONNECTION VALUE 65 KVA
WEIGHT 8000 KG

CHIP CONVEYOR

THE MACHINE COMES FROM AN OPERATING SAU RAFTS. A BESICHTIGUNMG POWER IS NOT POSSIBLE, BECAUSE THE MACHINE AT A FORWARDING AGENT IS STORED.
Vendedor: Zölch GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-turning diameter:    340 mm<br/>turning length:   1000 mm<br/>control:  <br/>--------------------------------------------------:  <br/>working range turning:  <br/>- swing diameter (max):    570 mm<br/>- turning diameter (max):    340 mm<br/>- worpiece length max.:   1000 mm<br/>- workpiece weight max.:   1000 kg<br/>main spindle:  <br/>- spindle revolutions (min):     85 /min<br/>- spindle revolutions (max):   2500 /min<br/>x/z slide:  <br/>- tool fixture: steel holder:        <br/>tailstock:  <br/>- sleeve stroke:    160 mm<br/>- sleeve diameter:     70 mm<br/>- taper: mk 5:        <br/>dimensions / weights:  <br/>- space requirements -left/right-:   2700 mm<br/>- space requirements -front/back-:   1700 mm<br/>- total height:   1800 mm<br/>- total weight approx.:   2800 kg<br/><br/><br/><br/><br/> TURNING DIAMETER: 340 MM
TURNING LENGTH: 1000 MM
CONTROL:
--------------------------------------------------:
WORKING RANGE TURNING:
- SWING DIAMETER (MAX): 570 MM
- TURNING DIAMETER (MAX): 340 MM
- WORPIECE LENGTH MAX.: 1000 MM
- WORKPIECE WEIGHT MAX.: 1000 KG
MAIN SPINDLE:
- SPINDLE REVOLUTIONS (MIN): 85 /MIN
- SPINDLE REVOLUTIONS (MAX): 2500 /MIN
X/Z SLIDE:
- TOOL FIXTURE: STEEL HOLDER:
TAILSTOCK:
- SLEEVE STROKE: 160 MM
- SLEEVE DIAMETER: 70 MM
- TAPER: MK 5:
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 2700 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 1700 MM
- TOTAL HEIGHT: 1800 MM
- TOTAL WEIGHT APPROX.: 2800 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-at Austria, 4407 Steyr-Gleink
Vendedor: AUER
Año de construcción: usado
Ubicación: Land-turning diameter: 570 mm<br/>turning length: 2000 mm<br/>control: siemens sinumeric <br/>steady:  <br/>chip conveyor:  <br/>turning dia. in gap: 600 mm<br/>turning diameter over slide: 340 mm<br/>spindle bore: 63 mm<br/>tool changer:  <br/>total power requirement: 22 kw<br/>weight of the machine ca.: 4,5 t<br/>dimensions of the machine ca.: 3,5x1,5x1,5 m<br/><br/><br/><br/><br/> TURNING DIAMETER: 570 MM
TURNING LENGTH: 2000 MM
CONTROL: SIEMENS SINUMERIC
STEADY:
CHIP CONVEYOR:
TURNING DIA. IN GAP: 600 MM
TURNING DIAMETER OVER SLIDE: 340 MM
SPINDLE BORE: 63 MM
TOOL CHANGER:
TOTAL POWER REQUIREMENT: 22 KW
WEIGHT OF THE MACHINE CA.: 4,5 T
DIMENSIONS OF THE MACHINE CA.: 3,5X1,5X1,5 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 480mm, z-travel: 2170mm, turning diameter: 610mm, rotational speed: 16000/min max., spindle diameter in front bearing: 240mm, bore diameter: 165mm, feed rate: 5000mm/min, rapid traverse: 10000mm/min max., swing over sledge: 610mm, swing over bed: 750mm, turning length: 3000mm, control: siemens 810.  X-TRAVEL: 480MM, Z-TRAVEL: 2170MM, TURNING DIAMETER: 610MM, ROTATIONAL SPEED: 16000/MIN MAX., SPINDLE DIAMETER IN FRONT BEARING: 240MM, BORE DIAMETER: 165MM, FEED RATE: 5000MM/MIN, RAPID TRAVERSE: 10000MM/MIN MAX., SWING OVER SLEDGE: 610MM, SWING OVER BED: 750MM, TURNING LENGTH: 3000MM, CONTROL: SIEMENS 810.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 570 mm<br/>turning length: 2000 mm<br/>control:  <br/>centre height: 280 mm<br/>turning diameter over slide rest: 340 mm<br/>bed width: 350 mm<br/>spindle diameter: 100 mm<br/>spindle hollow: 63 mm<br/>transmission ratio: 2 <br/>spindle turning speed range: 1-2500 u/min<br/>quill stroke: 160 mm<br/>total power requirement: 15 kw<br/>weight of the machine ca.: 3,15 t<br/>dimensions of the machine ca.: 2,75x1,65x1,75 m<br/><br/><br/><br/><br/> TURNING DIAMETER: 570 MM
TURNING LENGTH: 2000 MM
CONTROL:
CENTRE HEIGHT: 280 MM
TURNING DIAMETER OVER SLIDE REST: 340 MM
BED WIDTH: 350 MM
SPINDLE DIAMETER: 100 MM
SPINDLE HOLLOW: 63 MM
TRANSMISSION RATIO: 2
SPINDLE TURNING SPEED RANGE: 1-2500 U/MIN
QUILL STROKE: 160 MM
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 3,15 T
DIMENSIONS OF THE MACHINE CA.: 2,75X1,65X1,75 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Precio: 375.000 €
Ubicación: Land-     operating time approx. 7 years
    construction continuous casting plant, 2 strands
    segments radius / casting bow 7000 mm
    strand cutting device 2 gega torch cutting machine with powder additive
    burner for emergency tapping 2 gega burners, permanently installed, pivotable model

    casting dimensions
    square: 100 x 100, 160 x 160
    round: 150, 180, 200
    flat: 100x240

    casting capacity as per the manufacturer
    dimension 100 x 100, ca.16,7 t/h
    dimension 160 x 160, ca. 22,00 t/h
    dimension 110 x 250, ca. 24,6 t/h

    the continuous casting line consists out of the following devices:
    tudish
    casting rate control
    ingot molds
    oscillator, electromagnetic stirrers
    segmental arch 7000 mm
    cooling camber
    roller table
    strand cutting device (torch cutting system)
    stamping machine
    cooling section      operating time approx. 7 years
    construction continuous casting plant, 2 strands
    segments radius / casting bow 7000 mm
    strand cutting device 2 gega torch cutting machine with powder additive
    burner for emergency tapping 2 gega burners, permanently installed, pivotable model

    casting dimensions
    square: 100 x 100, 160 x 160
    round: 150, 180, 200
    flat: 100x240

    casting capacity as per the manufacturer
    dimension 100 x 100, ca.16,7 t/h
    dimension 160 x 160, ca. 22,00 t/h
    dimension 110 x 250, ca. 24,6 t/h

    the continuous casting line consists out of the following devices:
    tudish
    casting rate control
    ingot molds
    oscillator, electromagnetic stirrers
    segmental arch 7000 mm
    cooling camber
    roller table
    strand cutting device (torch cutting system)
    stamping machine
    cooling section     OPERATING TIME APPROX. 7 YEARS CONSTRUCTION CONTINUOUS CASTING PLANT, 2 STRANDS SEGMENTS RADIUS / CASTING BOW 7000 MM STRAND CUTTING DEVICE 2 GEGA TORCH CUTTING MACHINE WITH POWDER ADDITIVE BURNER FOR EMERGENCY TAPPING 2 GEGA BURNERS, PERMANENTLY INSTALLED, PIVOTABLE MODEL CASTING DIMENSIONS SQUARE: 100 X 100, 160 X 160 ROUND: 150, 180, 200 FLAT: 100X240 CASTING CAPACITY AS PER THE MANUFACTURER DIMENSION 100 X 100, CA.16,7 T/H DIMENSION 160 X 160, CA. 22,00 T/H DIMENSION 110 X 250, CA. 24,6 T/H THE CONTINUOUS CASTING LINE CONSISTS OUT OF THE FOLLOWING DEVICES: TUDISH CASTING RATE CONTROL INGOT MOLDS OSCILLATOR, ELECTROMAGNETIC STIRRERS SEGMENTAL ARCH 7000 MM COOLING CAMBER ROLLER TABLE STRAND CUTTING DEVICE (TORCH CUTTING SYSTEM) STAMPING MACHINE COOLING SECTION OPERATING TIME APPROX. 7 YEARS CONSTRUCTION CONTINUOUS CASTING PLANT, 2 STRANDS SEGMENTS RADIUS / CASTING BOW 7000 MM STRAND CUTTING DEVICE 2 GEGA TORCH CUTTING MACHINE WITH POWDER ADDITIVE BURNER FOR EMERGENCY TAPPING 2 GEGA BURNERS, PERMANENTLY INSTALLED, PIVOTABLE MODEL CASTING DIMENSIONS SQUARE: 100 X 100, 160 X 160 ROUND: 150, 180, 200 FLAT: 100X240 CASTING CAPACITY AS PER THE MANUFACTURER DIMENSION 100 X 100, CA.16,7 T/H DIMENSION 160 X 160, CA. 22,00 T/H DIMENSION 110 X 250, CA. 24,6 T/H THE CONTINUOUS CASTING LINE CONSISTS OUT OF THE FOLLOWING DEVICES: TUDISH CASTING RATE CONTROL INGOT MOLDS OSCILLATOR, ELECTROMAGNETIC STIRRERS SEGMENTAL ARCH 7000 MM COOLING CAMBER ROLLER TABLE STRAND CUTTING DEVICE (TORCH CUTTING SYSTEM) STAMPING MACHINE COOLING SECTION
Vendedor: NETBID Polska Sp. z o.o.
Año de construcción: usado
Ubicación: Land-turning diameter: 540 mm<br/>turning length: 1000 mm<br/>control: sin880t <br/>power capacity: 37,00 kw<br/>turning speeds: 8 - 3148 u/min<br/>swing diameter over slide rest: 450 mm<br/>greates pass round over bed: 540 mm<br/>tool taper: sk 40 din 69871-a40 <br/>tool magazin:: 24-fach <br/>spindle diameter in front bearing: 160 mm<br/>spindle bore: 115 mm<br/>z-axis: 1411 mm<br/>x-axis: 380 mm<br/>e-axis: 560 mm<br/>max. torque on the spindle: max. 1520 <br/>feed range: 0 - 10.000 mm/min<br/>rapid traverse: 15 m/min<br/>power feed longitudinal: 16.500 n<br/>power feed plane: 11.000 n<br/>drive milling spindle: 15,00 kw<br/>turning speed range - milling: 0 - 3000 u/min<br/>b-axis: 180 x 0,01 °<br/>y-axis: 300 mm<br/>quill stroke: 160 mm<br/>diameter of quill: 140 mm<br/>quill power: 3000 - 12000 n<br/>quill taper: mk5 <br/>number of working hours: 27.837 h<br/>total power requirement: 54,00 kw<br/>weight of the machine ca.: 14,00 t<br/>dimensions of the machine ca.: 6,30 x 3,40 x h2,70 m<br/>it is a 6-axis machine with siemens sinumerik 880t.<br/>turning-drilling and milling unit: tool system sk 40, c and y axis, chuck,<br/>chip conveyor, 12-turret, 3d interpolation, contour short description.<br/>machine is suitable for complete machining.<br/><br/><br/><br/><br/> TURNING DIAMETER: 540 MM
TURNING LENGTH: 1000 MM
CONTROL: SIN880T
POWER CAPACITY: 37,00 KW
TURNING SPEEDS: 8 - 3148 U/MIN
SWING DIAMETER OVER SLIDE REST: 450 MM
GREATES PASS ROUND OVER BED: 540 MM
TOOL TAPER: SK 40 DIN 69871-A40
TOOL MAGAZIN:: 24-FACH
SPINDLE DIAMETER IN FRONT BEARING: 160 MM
SPINDLE BORE: 115 MM
Z-AXIS: 1411 MM
X-AXIS: 380 MM
E-AXIS: 560 MM
MAX. TORQUE ON THE SPINDLE: MAX. 1520
FEED RANGE: 0 - 10.000 MM/MIN
RAPID TRAVERSE: 15 M/MIN
POWER FEED LONGITUDINAL: 16.500 N
POWER FEED PLANE: 11.000 N
DRIVE MILLING SPINDLE: 15,00 KW
TURNING SPEED RANGE - MILLING: 0 - 3000 U/MIN
B-AXIS: 180 X 0,01 °
Y-AXIS: 300 MM
QUILL STROKE: 160 MM
DIAMETER OF QUILL: 140 MM
QUILL POWER: 3000 - 12000 N
QUILL TAPER: MK5
NUMBER OF WORKING HOURS: 27.837 H
TOTAL POWER REQUIREMENT: 54,00 KW
WEIGHT OF THE MACHINE CA.: 14,00 T
DIMENSIONS OF THE MACHINE CA.: 6,30 X 3,40 X H2,70 M
IT IS A 6-AXIS MACHINE WITH SIEMENS SINUMERIK 880T.
TURNING-DRILLING AND MILLING UNIT: TOOL SYSTEM SK 40, C AND Y AXIS, CHUCK,
CHIP CONVEYOR, 12-TURRET, 3D INTERPOLATION, CONTOUR SHORT DESCRIPTION.
MACHINE IS SUITABLE FOR COMPLETE MACHINING.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-voest da180 - 180/52/800 control & spindle lathe

top width: 800 mm
tip height: 180 mm
turning diameter over bed: 380 mm
swing over carriage: 200 mm
quill recording: mk4
spindle bore: 52 mm
bed width: 330 mm
speeds: 12
speed range: 33-1500 rpm
feed speed: 0,072 - 0.54 mm
metric threads: 0.5-3,756 mm
inch thread: tpi 6.75-46
motor power: 3 kw
voltage: 400v
dimensions wxhxd: ca. 2000 x 1400 x 1000 mm
weight: approx. 1200 kg
facilities: 3-axis digital display, 3 - jaw chuck, bevel wheel, coolant system, chuck guard, tracking grains, quick-change holder, lighting system u.m.. VOEST DA180 - 180/52/800 CONTROL & SPINDLE LATHE TOP WIDTH: 800 MM TIP HEIGHT: 180 MM TURNING DIAMETER OVER BED: 380 MM SWING OVER CARRIAGE: 200 MM QUILL RECORDING: MK4 SPINDLE BORE: 52 MM BED WIDTH: 330 MM SPEEDS: 12 SPEED RANGE: 33-1500 RPM FEED SPEED: 0,072 - 0.54 MM METRIC THREADS: 0.5-3,756 MM INCH THREAD: TPI 6.75-46 MOTOR POWER: 3 KW VOLTAGE: 400V DIMENSIONS WXHXD: CA. 2000 X 1400 X 1000 MM WEIGHT: APPROX. 1200 KG FACILITIES: 3-AXIS DIGITAL DISPLAY, 3 - JAW CHUCK, BEVEL WHEEL, COOLANT SYSTEM, CHUCK GUARD, TRACKING GRAINS, QUICK-CHANGE HOLDER, LIGHTING SYSTEM U.M..
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-turning diameter: 550 mm<br/>turning length: 1.000 mm<br/>control: visulesta 4 <br/>turning diameter over bed: 570 mm<br/>turning dia. over face-slide: 350 mm<br/>spindle head: din55027 gr. 8/6 <br/>spindle diameter in front bearing: 100 mm<br/>spindle bore: 63 mm<br/>spindle turning speed range: 1-2.500 u/min<br/>power capacity at 40 % load: 15 kw<br/>power capacity at 100 % load: 11 kw<br/>max. torque on the spindle: 1.800 / 1.200 nm<br/>feed speeds: 0,001 - 3 mm/u<br/>rapid traverse longitudinal: 7 m/min<br/>rapid traverse cross: 3,5 m/min<br/>power feed longitudinal: 9.000 n<br/>power feed plane: 7.000 n<br/>tailstock taper mt: 5 <br/>quill stroke: 160 mm<br/>diameter of quill: 70 mm<br/>centre height: 280 mm<br/>bed width: 350 mm<br/>radial face slide travel: 340 mm<br/>travel of upper support: 140 mm<br/>thread - mm pitch: 0,5 - 140 mm<br/>thread - inch: 1/4 - 56 g/1<br/>thread - module: 0,125 - 28 <br/>max. workpiece weight between centres: 1.000 kg<br/>max. workpiece weight -without tailstock: 400 kg<br/>total power requirement: 15,00 kw<br/>weight of the machine ca.: 3,20 t<br/>dimensions of the machine ca.: 3,20 x 1,90 x h1,90 m<br/>cycle-control visulesta 4, steady, tail-stock.<br/>machine can be inspected under power<br/><br/><br/><br/><br/> TURNING DIAMETER: 550 MM
TURNING LENGTH: 1.000 MM
CONTROL: VISULESTA 4
TURNING DIAMETER OVER BED: 570 MM
TURNING DIA. OVER FACE-SLIDE: 350 MM
SPINDLE HEAD: DIN55027 GR. 8/6
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
SPINDLE BORE: 63 MM
SPINDLE TURNING SPEED RANGE: 1-2.500 U/MIN
POWER CAPACITY AT 40 % LOAD: 15 KW
POWER CAPACITY AT 100 % LOAD: 11 KW
MAX. TORQUE ON THE SPINDLE: 1.800 / 1.200 NM
FEED SPEEDS: 0,001 - 3 MM/U
RAPID TRAVERSE LONGITUDINAL: 7 M/MIN
RAPID TRAVERSE CROSS: 3,5 M/MIN
POWER FEED LONGITUDINAL: 9.000 N
POWER FEED PLANE: 7.000 N
TAILSTOCK TAPER MT: 5
QUILL STROKE: 160 MM
DIAMETER OF QUILL: 70 MM
CENTRE HEIGHT: 280 MM
BED WIDTH: 350 MM
RADIAL FACE SLIDE TRAVEL: 340 MM
TRAVEL OF UPPER SUPPORT: 140 MM
THREAD - MM PITCH: 0,5 - 140 MM
THREAD - INCH: 1/4 - 56 G/1
THREAD - MODULE: 0,125 - 28
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 1.000 KG
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK: 400 KG
TOTAL POWER REQUIREMENT: 15,00 KW
WEIGHT OF THE MACHINE CA.: 3,20 T
DIMENSIONS OF THE MACHINE CA.: 3,20 X 1,90 X H1,90 M
CYCLE-CONTROL VISULESTA 4, STEADY, TAIL-STOCK.
MACHINE CAN BE INSPECTED UNDER POWER




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-voest da210 - 210/48/1500 universal lathe

centre distance: 1500 mm
tip height: 210 mm
turning diameter over bed: 430 mm
swing over carriage: 280 mm
quill recording: mk4
spindle bore: 48 mm
bed width: 330 mm
speeds: 12
speed range: 21-1500 rpm
feed speed: 0,072-4.04 mm
metric threads: 0.5-28 mm
inch thread: 1-56 tpi
motor power: 3 kw
voltage: 400v
dimensions wxhxd: approx. 2700 x 1400 x 800 mm
weight: 1500 kg
facilities: 4 - jaw chuck, tracking grains u.m.. VOEST DA210 - 210/48/1500 UNIVERSAL LATHE CENTRE DISTANCE: 1500 MM TIP HEIGHT: 210 MM TURNING DIAMETER OVER BED: 430 MM SWING OVER CARRIAGE: 280 MM QUILL RECORDING: MK4 SPINDLE BORE: 48 MM BED WIDTH: 330 MM SPEEDS: 12 SPEED RANGE: 21-1500 RPM FEED SPEED: 0,072-4.04 MM METRIC THREADS: 0.5-28 MM INCH THREAD: 1-56 TPI MOTOR POWER: 3 KW VOLTAGE: 400V DIMENSIONS WXHXD: APPROX. 2700 X 1400 X 800 MM WEIGHT: 1500 KG FACILITIES: 4 - JAW CHUCK, TRACKING GRAINS U.M..
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-turning diameter: 450 mm<br/>turning length: 1200 mm<br/>control: siemens 840 c <br/>swing over bed: 540 mm<br/>swing diameter over slide rest: 450 mm<br/>spindle bore: 77 mm<br/>spindle turning speed range: 10 - 3150 u/min<br/>c-axis: 0,001 °/deg.<br/>y-axis: 160 (+/- 80) mm<br/>b-axis: 180 (+/- 90) °/deg.<br/>x-travel: 380 mm<br/>z-travel: 2031 mm<br/>milling head speed: 1-3000 u/min<br/>hobbing length: 2031 mm<br/>weight of the machine ca.: 10,5 t<br/>dimensions of the machine ca.: 6248 x 3302x 2700 mm<br/>* werkzeugwechsler mit 24 werkzeugen<br/>* spindelinnenkühlung<br/>* nc-reitstock,pinolen-drm. 100 mm<br/>* nc-lünette, smw , slu-4-zs , spannbereich 35-245 mm<br/>* y-achse<br/>* b-achse<br/>* späneförderer<br/>* hochdruck-kühlung mit filterung<br/>* kraftspannfutter, durchmesser 315  mm  knc<br/>* diverse werkzeugaufnahmen<br/><br/><br/><br/><br/> TURNING DIAMETER: 450 MM
TURNING LENGTH: 1200 MM
CONTROL: SIEMENS 840 C
SWING OVER BED: 540 MM
SWING DIAMETER OVER SLIDE REST: 450 MM
SPINDLE BORE: 77 MM
SPINDLE TURNING SPEED RANGE: 10 - 3150 U/MIN
C-AXIS: 0,001 °/DEG.
Y-AXIS: 160 (+/- 80) MM
B-AXIS: 180 (+/- 90) °/DEG.
X-TRAVEL: 380 MM
Z-TRAVEL: 2031 MM
MILLING HEAD SPEED: 1-3000 U/MIN
HOBBING LENGTH: 2031 MM
WEIGHT OF THE MACHINE CA.: 10,5 T
DIMENSIONS OF THE MACHINE CA.: 6248 X 3302X 2700 MM
* WERKZEUGWECHSLER MIT 24 WERKZEUGEN
* SPINDELINNENKüHLUNG
* NC-REITSTOCK,PINOLEN-DRM. 100 MM
* NC-LüNETTE, SMW , SLU-4-ZS , SPANNBEREICH 35-245 MM
* Y-ACHSE
* B-ACHSE
* SPäNEFöRDERER
* HOCHDRUCK-KüHLUNG MIT FILTERUNG
* KRAFTSPANNFUTTER, DURCHMESSER 315 MM KNC
* DIVERSE WERKZEUGAUFNAHMEN




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-voest da210 - 210/48/1000 universal lathe

top width: 1000 mm
tip height: 210 mm
turning diameter over bed: 430 mm
swing over carriage: 280 mm
quill recording: mk4
spindle bore: 48 mm
bed width: 330 mm
speeds: 18
speed range: 21-1500 rpm
feed speed: 0.068-3,805 mm
metric threads: 0.5-28 mm
inch thread: 1-56 tpi
motor power: 3 kw
voltage: 400v
dimensions wxhxd: ca. 2300 x 1400 x 900 mm
weight: approx. 1900 kg
facilities: 3 - jaw chuck, coolant system u.m.. VOEST DA210 - 210/48/1000 UNIVERSAL LATHE TOP WIDTH: 1000 MM TIP HEIGHT: 210 MM TURNING DIAMETER OVER BED: 430 MM SWING OVER CARRIAGE: 280 MM QUILL RECORDING: MK4 SPINDLE BORE: 48 MM BED WIDTH: 330 MM SPEEDS: 18 SPEED RANGE: 21-1500 RPM FEED SPEED: 0.068-3,805 MM METRIC THREADS: 0.5-28 MM INCH THREAD: 1-56 TPI MOTOR POWER: 3 KW VOLTAGE: 400V DIMENSIONS WXHXD: CA. 2300 X 1400 X 900 MM WEIGHT: APPROX. 1900 KG FACILITIES: 3 - JAW CHUCK, COOLANT SYSTEM U.M..
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-<br>center height: 180 mm<br>center distance: 1000 mm<br>spindle bore: 52 mm <br>voest alpine da 180/0.8<br />
centre lathe <br />
technical data<br />
centre height	180 	mm <br />
distance between centres	1000 	mm <br />
swing over cross-slide	185 	mm <br />
swing over bed	360 	mm <br />
spindle hole	52 	mm <br />
spindle speeds:	 	 <br />
    number (steps)	12 	 <br />
       from	33 	rpm <br />
       up to	1500 	rpm <br />
taper in tailstock:	4 	mt <br />
voltage 50 hz 3x	380 	volt <br />
machine´s weight about	1000 	kg <br />
overall dimensions machine:	 	 <br />
    length	2000 	mm <br />
    width	1200 	mm <br />
    height	1800 	mm m 
CENTER HEIGHT: 180 MM
CENTER DISTANCE: 1000 MM
SPINDLE BORE: 52 MM
VOEST ALPINE DA 180/0.8
CENTRE LATHE&NBSP;
TECHNICAL DATA
CENTRE HEIGHT 180 MM&NBSP;
DISTANCE BETWEEN CENTRES 1000 MM&NBSP;
SWING OVER CROSS-SLIDE 185 MM&NBSP;
SWING OVER BED 360 MM&NBSP;
SPINDLE HOLE 52 MM&NBSP;
SPINDLE SPEEDS: &NBSP;
&NBSP; &NBSP; NUMBER (STEPS) 12 &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 33 RPM&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 1500 RPM&NBSP;
TAPER IN TAILSTOCK: 4 MT&NBSP;
VOLTAGE 50 HZ 3X 380 VOLT&NBSP;
MACHINE´S WEIGHT ABOUT 1000 KG&NBSP;
OVERALL DIMENSIONS MACHINE: &NBSP;
&NBSP; &NBSP; LENGTH 2000 MM&NBSP;
&NBSP; &NBSP; WIDTH 1200 MM&NBSP;
&NBSP; &NBSP; HEIGHT 1800 MM M&NBSP;
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-voest apollo 520 - 260/71/1500 universal lathe VOEST APOLLO 520 - 260/71/1500 UNIVERSAL LATHE
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-de Germany, 58256 Ennepetal
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-thickness max.... 10 mm
sheet strength max.... 420 n/mm2
elongation at break max. *)... 28%
cutting length max.... 3150 mm
be seam thickness with 2 cylinders... 11 mm
be hem width max. with 2 cylinders... 50 mm
upper knife all-in-one... 3260 mm
bottom blade multipart... 3250 mm
stã¤nderdurchganag... 3200 mm
projection... 300 mm
cutting angle... 1.5 â°
stroke rate... i = 3150 mm... 18 min-1
stroke rate... i = 500 mm &hellip; 37 min-1
cutting-length adjustment... 500-3150 mm
velocity adjustment range... 0-1000 mm
main motor... 30 kw
stop variable speed motor... 0.09 kw
lower holder number... 14 piece
retainer oil pressure max.... 130 bar
lower holder force total... 139 kn
master cylinder oil pressure max.... 250 bar
oil pressure for withdrawal hydraulic p1 max.... 130 bar
memory tension max.... 90 bar
) greater elongation decreases the thickness to be cut THICKNESS MAX.... 10 MM SHEET STRENGTH MAX.... 420 N/MM2 ELONGATION AT BREAK MAX. *)... 28% CUTTING LENGTH MAX.... 3150 MM BE SEAM THICKNESS WITH 2 CYLINDERS... 11 MM BE HEM WIDTH MAX. WITH 2 CYLINDERS... 50 MM UPPER KNIFE ALL-IN-ONE... 3260 MM BOTTOM BLADE MULTIPART... 3250 MM ST&ATILDE;&CURREN;NDERDURCHGANAG... 3200 MM PROJECTION... 300 MM CUTTING ANGLE... 1.5 &ACIRC;&DEG; STROKE RATE... I = 3150 MM... 18 MIN-1 STROKE RATE... I = 500 MM &HELLIP; 37 MIN-1 CUTTING-LENGTH ADJUSTMENT... 500-3150 MM VELOCITY ADJUSTMENT RANGE... 0-1000 MM MAIN MOTOR... 30 KW STOP VARIABLE SPEED MOTOR... 0.09 KW LOWER HOLDER NUMBER... 14 PIECE RETAINER OIL PRESSURE MAX.... 130 BAR LOWER HOLDER FORCE TOTAL... 139 KN MASTER CYLINDER OIL PRESSURE MAX.... 250 BAR OIL PRESSURE FOR WITHDRAWAL HYDRAULIC P1 MAX.... 130 BAR MEMORY TENSION MAX.... 90 BAR ) GREATER ELONGATION DECREASES THE THICKNESS TO BE CUT
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Precio: 50 €
Ubicación: Land-type voest da TYPE VOEST DA
Vendedor: G. Folmer Industriebedarf
Año de construcción: usado
Ubicación: Land-tip height: 180 mm
top width: 800 mm
swing over cross slide: 200 mm
turning diameter over bed: 380 mm
bed width: 330 mm
spindle bore: ã?52mm
tailstock quill: mk4
performance: 4hp/5, 5kw
weight: approx. 1000kg
built around 1981

accessories: 3 - jaw chuck, chuck guard, 3 quick change holder TIP HEIGHT: 180 MM TOP WIDTH: 800 MM SWING OVER CROSS SLIDE: 200 MM TURNING DIAMETER OVER BED: 380 MM BED WIDTH: 330 MM SPINDLE BORE: &ATILDE;?52MM TAILSTOCK QUILL: MK4 PERFORMANCE: 4HP/5, 5KW WEIGHT: APPROX. 1000KG BUILT AROUND 1981 ACCESSORIES: 3 - JAW CHUCK, CHUCK GUARD, 3 QUICK CHANGE HOLDER
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Precio: 9.590 €
Ubicación: Land-; ready for use ; READY FOR USE
Vendedor: Zölch GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-cnc turning and milling centre for kurbelwellenbearbeitungdrehlaenge = 2031 mmdrehdurchmesser: 540 mm over bed 450 mm schlitten12 werkzeugedoppelkreuzschlitten longitudinal z axis: 2031 mm plan x CNC TURNING AND MILLING CENTRE FOR KURBELWELLENBEARBEITUNGDREHLAENGE = 2031 MMDREHDURCHMESSER: 540 MM OVER BED 450 MM SCHLITTEN12 WERKZEUGEDOPPELKREUZSCHLITTEN LONGITUDINAL Z AXIS: 2031 MM PLAN X
Vendedor: SENER MASCHINEN
Año de construcción: usado
Ubicación: Land-screen surface: 1000 x 3000 mm, semi mobile steel structure with discharge chutes SCREEN SURFACE: 1000 X 3000 MM, SEMI MOBILE STEEL STRUCTURE WITH DISCHARGE CHUTES
Vendedor: ENDERS Produktion GmbH
Año de construcción: usado
Ubicación: Land-continuous steel cast slab plant - 1.0 mill. t/annum, 
1. pulverised coal injection plant (pci)  2. sinter plant	3. blast furnace
4. basic oxygen steel making plant		5. ladle arc furnace
6. voest alpine twin strand continuous slab caster (cc2)
7. demag single strand continuous slab caster (cc3)
 CONTINUOUS STEEL CAST SLAB PLANT - 1.0 MILL. T/ANNUM, 1. PULVERISED COAL INJECTION PLANT (PCI) 2. SINTER PLANT 3. BLAST FURNACE 4. BASIC OXYGEN STEEL MAKING PLANT 5. LADLE ARC FURNACE 6. VOEST ALPINE TWIN STRAND CONTINUOUS SLAB CASTER (CC2) 7. DEMAG SINGLE STRAND CONTINUOUS SLAB CASTER (CC3)
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-dear sirs,
hi, we would like to offer you our stock available due the most powerfull 
brand names all of the world.
our stock is available in germany.
you are invited to see the attached list for your att. if 
there is a machine that is intersts you pls. mail us.
best rgds
shabtay    

cnc lathe, hollow spindle, max mueller amw-63, rotation-Ø over bed 1200 mm, rotation-Ø over slide 710 mm, distance 2800 mm, 
hollow spindle bore 350 mm, control num 750 (retrofitted to cnc in 1992) 16-pos. tool turret, acc.: approx. 20 toolholders, 3-jaw chuck 
600 mm Ø with boring 250, 1 steady		43.500,00 euro

cnc lathe gildemeister mf sprint 65, yom 1996, pass through spindle 65 mm, distance 280 mm, x1/z1 = 155/280 mm, x2/z2 = 82/120 mm, 
2 x 8-pos. tool turret (2 x 4 pos. for driven tools), with counter spindle, siemens sinumerik 840 c, with tool measuring device, c axis, 
acc. various tool holders for turret (for driven tools as well), bar loading magazine, various reduction pipes for bar loading magazine, chip
conveyor, coolant			48.000,00  euro

cnc lathe index g 300, yom 1995, max. rotation-Ø 590 mm, max. turning-Ø 270 mm, turning length 710 mm, spindle bore 65 mm, x1/z1 = 
140/710 mm, x2/z2 = 140/710 mm, + axis z4/ z5, 2 tool turret with each 12 positions (all 12 positions are driven), with counter spindle, 
siemens sinumerik 840 c, loading magazine mbl 65, acc.: pick up spindle hainbuch, chip conveyor knoll, belt conveyor for workpiece, 
coolant			60.500,00  euro


cnc lathe gildemeister mf twin 300, yom 1996, with counter spindle, max. rotation-Ø over bed 320 mm, max. turning-Ø 250 mm,
max. distance main spindle-counter spindle 1400 mm, spindle bore 79 mm, max. bar-Ø 65 mm, x1/z1 = 253/945 mm, x2/z2 = 198/1080 mm,
y2 (vertical travel of slide) = +/- 60 mm, travel counter spindle (travel of slide a3) = 1150 mm, with 2x12-pos. tool turrets (each 12 stations are
driven), control ge-fanuc series 16-t, c-axis, coolant through spindle, acc.: 2 pcs. hydr. 3-jaw chuck forkardt 250 mm Ø, various toolholders for tool turrets (for driven tools as well), chip conveyor, bar loading magazin, coolant, removal band
- very good condition  - only approx. 6000 working hours	66.100,00 euro

hadar trading
strolovitz shabtay
tel : 972 9 8619376
fax : 972 9 8871547
mobile # : 972 52 8833102

e-mail : shabi01@inter.net.il
 












    DEAR SIRS, HI, WE WOULD LIKE TO OFFER YOU OUR STOCK AVAILABLE DUE THE MOST POWERFULL BRAND NAMES ALL OF THE WORLD. OUR STOCK IS AVAILABLE IN GERMANY. YOU ARE INVITED TO SEE THE ATTACHED LIST FOR YOUR ATT. IF THERE IS A MACHINE THAT IS INTERSTS YOU PLS. MAIL US. BEST RGDS SHABTAY CNC LATHE, HOLLOW SPINDLE, MAX MUELLER AMW-63, ROTATION-Ø OVER BED 1200 MM, ROTATION-Ø OVER SLIDE 710 MM, DISTANCE 2800 MM, HOLLOW SPINDLE BORE 350 MM, CONTROL NUM 750 (RETROFITTED TO CNC IN 1992) 16-POS. TOOL TURRET, ACC.: APPROX. 20 TOOLHOLDERS, 3-JAW CHUCK 600 MM Ø WITH BORING 250, 1 STEADY 43.500,00 EURO CNC LATHE GILDEMEISTER MF SPRINT 65, YOM 1996, PASS THROUGH SPINDLE 65 MM, DISTANCE 280 MM, X1/Z1 = 155/280 MM, X2/Z2 = 82/120 MM, 2 X 8-POS. TOOL TURRET (2 X 4 POS. FOR DRIVEN TOOLS), WITH COUNTER SPINDLE, SIEMENS SINUMERIK 840 C, WITH TOOL MEASURING DEVICE, C AXIS, ACC. VARIOUS TOOL HOLDERS FOR TURRET (FOR DRIVEN TOOLS AS WELL), BAR LOADING MAGAZINE, VARIOUS REDUCTION PIPES FOR BAR LOADING MAGAZINE, CHIP CONVEYOR, COOLANT 48.000,00 EURO CNC LATHE INDEX G 300, YOM 1995, MAX. ROTATION-Ø 590 MM, MAX. TURNING-Ø 270 MM, TURNING LENGTH 710 MM, SPINDLE BORE 65 MM, X1/Z1 = 140/710 MM, X2/Z2 = 140/710 MM, + AXIS Z4/ Z5, 2 TOOL TURRET WITH EACH 12 POSITIONS (ALL 12 POSITIONS ARE DRIVEN), WITH COUNTER SPINDLE, SIEMENS SINUMERIK 840 C, LOADING MAGAZINE MBL 65, ACC.: PICK UP SPINDLE HAINBUCH, CHIP CONVEYOR KNOLL, BELT CONVEYOR FOR WORKPIECE, COOLANT 60.500,00 EURO CNC LATHE GILDEMEISTER MF TWIN 300, YOM 1996, WITH COUNTER SPINDLE, MAX. ROTATION-Ø OVER BED 320 MM, MAX. TURNING-Ø 250 MM, MAX. DISTANCE MAIN SPINDLE-COUNTER SPINDLE 1400 MM, SPINDLE BORE 79 MM, MAX. BAR-Ø 65 MM, X1/Z1 = 253/945 MM, X2/Z2 = 198/1080 MM, Y2 (VERTICAL TRAVEL OF SLIDE) = +/- 60 MM, TRAVEL COUNTER SPINDLE (TRAVEL OF SLIDE A3) = 1150 MM, WITH 2X12-POS. TOOL TURRETS (EACH 12 STATIONS ARE DRIVEN), CONTROL GE-FANUC SERIES 16-T, C-AXIS, COOLANT THROUGH SPINDLE, ACC.: 2 PCS. HYDR. 3-JAW CHUCK FORKARDT 250 MM Ø, VARIOUS TOOLHOLDERS FOR TOOL TURRETS (FOR DRIVEN TOOLS AS WELL), CHIP CONVEYOR, BAR LOADING MAGAZIN, COOLANT, REMOVAL BAND - VERY GOOD CONDITION - ONLY APPROX. 6000 WORKING HOURS 66.100,00 EURO HADAR TRADING STROLOVITZ SHABTAY TEL : 972 9 8619376 FAX : 972 9 8871547 MOBILE # : 972 52 8833102 E-MAIL : SHABI01@INTER.NET.IL
Vendedor: Hadar Trading Ltd
Año de construcción: usado
Ubicación: Land-used hydraulic press made by voest. the maximum pressure of 100 t. maximum lifting height 80mm. 100 mm stroke position, adjustment of 0.5 ps 3000u / min. the motor of 15 ps - 11 kw 1500u / min. operating pressure 275kg / cm2 max. USED HYDRAULIC PRESS MADE BY VOEST. THE MAXIMUM PRESSURE OF 100 T. MAXIMUM LIFTING HEIGHT 80MM. 100 MM STROKE POSITION, ADJUSTMENT OF 0.5 PS 3000U / MIN. THE MOTOR OF 15 PS - 11 KW 1500U / MIN. OPERATING PRESSURE 275KG / CM2 MAX.
Vendedor: Industrio Service
Año de construcción: usado
Ubicación: Land-tip height: 500 mm top width: 4000 mm circular diameter: bed 1020 mm spindle bore: 152 mm taper tailstock: 6 mk spindle speed: 0.9-710 rpm feeds: longitudinal/plan 0,095 22.4/0,9425-12 mm / u thread pitches: 1-224 mm electrical connection: 380 v, 5/37 kw space: 6550/7200 x 2300 x 1900 mm weight: approx. 11000 kg 
 TIP HEIGHT: 500 MM TOP WIDTH: 4000 MM CIRCULAR DIAMETER: BED 1020 MM SPINDLE BORE: 152 MM TAPER TAILSTOCK: 6 MK SPINDLE SPEED: 0.9-710 RPM FEEDS: LONGITUDINAL/PLAN 0,095 22.4/0,9425-12 MM / U THREAD PITCHES: 1-224 MM ELECTRICAL CONNECTION: 380 V, 5/37 KW SPACE: 6550/7200 X 2300 X 1900 MM WEIGHT: APPROX. 11000 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more VOEST types: