43 ofertas

Año de construcción: usado
Ubicación: Land-qty.1 second-hand robot sawing line
mfc.:	fill gesellschaft m.b.h.		built:	2007
sub-suppliers:	pneumatic – festo, bosch		hydraulic – bosch
	gear motors, servo motors, control units – sew & siemens	robot - kuka
	saw motors – perske		lubrication unit – vogel  
vibrating channels – jöst        control system 840d – siemens	
basic data of the designed sawing line
different cutting sequences:	90° - chop cuttings	cuts with parallel miter
cuts with opposite miter	cuts with turned profiles – 3d-layer cuts – left & right parts
saw blade change:	approx. 5 min.
loose chips are blown out of the sawn profiles via nozzles and air curtains in automatic mode.
profile definition		profile length:	max. 7200 mm
	finished length:	up to 1750 mm at double miter	80-2500 mm at chop cuttings
	angles: 	0° - 60°		profile height:		20 – 150 mm (chop cuttings)
frame & layer dimensions		in the frame:  1200 mm	to the saw:  1000 mm
	stack in defined stacking boxes	separate layers or reduced width to saw
short & long length		short length:	80 – 499 mm	transverse transport for destacking
	up to 500 mm 	along then cross transport
clamping rest		max. length:	175 mm to aim for 150 mm
transverse transport	- short profiles are advanced by the following material
-	 in this case, the transverse transport is arranged movable, so that there is enough free space for sawing available
permanently sound pressure level	approx. 80 db(a) - measured in front of the saw line
 QTY.1 SECOND-HAND ROBOT SAWING LINE MFC.: FILL GESELLSCHAFT M.B.H. BUILT: 2007 SUB-SUPPLIERS: PNEUMATIC – FESTO, BOSCH HYDRAULIC – BOSCH GEAR MOTORS, SERVO MOTORS, CONTROL UNITS – SEW & SIEMENS ROBOT - KUKA SAW MOTORS – PERSKE LUBRICATION UNIT – VOGEL VIBRATING CHANNELS – JöST CONTROL SYSTEM 840D – SIEMENS BASIC DATA OF THE DESIGNED SAWING LINE DIFFERENT CUTTING SEQUENCES: 90° - CHOP CUTTINGS CUTS WITH PARALLEL MITER CUTS WITH OPPOSITE MITER CUTS WITH TURNED PROFILES – 3D-LAYER CUTS – LEFT & RIGHT PARTS SAW BLADE CHANGE: APPROX. 5 MIN. LOOSE CHIPS ARE BLOWN OUT OF THE SAWN PROFILES VIA NOZZLES AND AIR CURTAINS IN AUTOMATIC MODE. PROFILE DEFINITION PROFILE LENGTH: MAX. 7200 MM FINISHED LENGTH: UP TO 1750 MM AT DOUBLE MITER 80-2500 MM AT CHOP CUTTINGS ANGLES: 0° - 60° PROFILE HEIGHT: 20 – 150 MM (CHOP CUTTINGS) FRAME & LAYER DIMENSIONS IN THE FRAME: 1200 MM TO THE SAW: 1000 MM STACK IN DEFINED STACKING BOXES SEPARATE LAYERS OR REDUCED WIDTH TO SAW SHORT & LONG LENGTH SHORT LENGTH: 80 – 499 MM TRANSVERSE TRANSPORT FOR DESTACKING UP TO 500 MM ALONG THEN CROSS TRANSPORT CLAMPING REST MAX. LENGTH: 175 MM TO AIM FOR 150 MM TRANSVERSE TRANSPORT - SHORT PROFILES ARE ADVANCED BY THE FOLLOWING MATERIAL - IN THIS CASE, THE TRANSVERSE TRANSPORT IS ARRANGED MOVABLE, SO THAT THERE IS ENOUGH FREE SPACE FOR SAWING AVAILABLE PERMANENTLY SOUND PRESSURE LEVEL APPROX. 80 DB(A) - MEASURED IN FRONT OF THE SAW LINE
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 40 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 850 x 450 x 1100 mm<br/>description: on trolley, with separate control cabinet, unit 280 x 270 x 360 mm WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 850 X 450 X 1100 MM
DESCRIPTION: ON TROLLEY, WITH SEPARATE CONTROL CABINET, UNIT 280 X 270 X 360 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-capacity:400tontable dimensions:1.250 x 875mmram dimensions:950 x 560mmshut height max.:630mmthroat depth:450mmhole in the table:630 x 360 x Ø 450mmstroke:30 - 160mmram adjustment:120mmstrokes an minute in passage unloaded:40min-¹motorpower:30,0kwdimensions of the machine wxdxh:1,60 x 2,90 x 3,36mweight of the machine ca.:22.000kgcontrol:2-hands / feed elec.the machine is equipped with;•bolsterplate 1250 x 875 x 140 mm•shearing safety plate•balancing cylinders on the ram•autom. mot. central ‘vogel’ lubrication•new control in 2018revised in 2018  CAPACITY:400TONTABLE DIMENSIONS:1.250 X 875MMRAM DIMENSIONS:950 X 560MMSHUT HEIGHT MAX.:630MMTHROAT DEPTH:450MMHOLE IN THE TABLE:630 X 360 X Ø 450MMSTROKE:30 - 160MMRAM ADJUSTMENT:120MMSTROKES AN MINUTE IN PASSAGE UNLOADED:40MIN-¹MOTORPOWER:30,0KWDIMENSIONS OF THE MACHINE WXDXH:1,60 X 2,90 X 3,36MWEIGHT OF THE MACHINE CA.:22.000KGCONTROL:2-HANDS / FEED ELEC.THE MACHINE IS EQUIPPED WITH;•BOLSTERPLATE 1250 X 875 X 140 MM•SHEARING SAFETY PLATE•BALANCING CYLINDERS ON THE RAM•AUTOM. MOT. CENTRAL ‘VOGEL’ LUBRICATION•NEW CONTROL IN 2018REVISED IN 2018
Vendedor: Voortman Machines
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 1100 x 510 x 1300 mm<br/>description: on workshop trolley, with hydraulic lines, hydraulic tank 540 x 310 x 320 mm, with electric cabinet, container contents 50 l, output 2.5 l/min, p max. 50 bar WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 510 X 1300 MM
DESCRIPTION: ON WORKSHOP TROLLEY, WITH HYDRAULIC LINES, HYDRAULIC TANK 540 X 310 X 320 MM, WITH ELECTRIC CABINET, CONTAINER CONTENTS 50 L, OUTPUT 2.5 L/MIN, P MAX. 50 BAR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-capacity		:	150	ton
table dimensions	:	1.050 x 670	mm
ram dimensions	:	650 x 330	mm
shut height max.	:	425	mm
throat depth	:	350	mm
clearance hole in the table	:	330 x 205	mm
stroke		:	20 - 160	mm
ram adjustment	:	85	mm
strokes an minute in passage unloaded	:	40 - 60	min-¹
motor power	:	9,5	kw
dimensions of the machine wxdxh	:	1,25 x 2,30 x 2,60	m
weight of the machine ca.	:	7.500	kg
operation	:	2-hands / el.	
the machine is equipped with; 
•	safety plate 
•	“vogel” auto. motorical lubrication
•	2 speeds
 CAPACITY : 150 TON TABLE DIMENSIONS : 1.050 X 670 MM RAM DIMENSIONS : 650 X 330 MM SHUT HEIGHT MAX. : 425 MM THROAT DEPTH : 350 MM CLEARANCE HOLE IN THE TABLE : 330 X 205 MM STROKE : 20 - 160 MM RAM ADJUSTMENT : 85 MM STROKES AN MINUTE IN PASSAGE UNLOADED : 40 - 60 MIN-¹ MOTOR POWER : 9,5 KW DIMENSIONS OF THE MACHINE WXDXH : 1,25 X 2,30 X 2,60 M WEIGHT OF THE MACHINE CA. : 7.500 KG OPERATION : 2-HANDS / EL. THE MACHINE IS EQUIPPED WITH; • SAFETY PLATE • “VOGEL” AUTO. MOTORICAL LUBRICATION • 2 SPEEDS
Vendedor: Voortman Machines
Año de construcción: usado
Precio: used machinery auction RESALE 30 €
Ubicación: Land-weight approx.: 1 kg<br/>dimensions (l x w x h) approx.: 720 x 280 x 60 mm<br/>description: measuring range up to 500 mm, with digital display WEIGHT APPROX.: 1 KG
DIMENSIONS (L X W X H) APPROX.: 720 X 280 X 60 MM
DESCRIPTION: MEASURING RANGE UP TO 500 MM, WITH DIGITAL DISPLAY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-capacity		:	110	ton
table dimensions	:	920 x 600 	mm
ram dimensions	:	540 x 290	mm
shut height max.	:	440	mm
throat		:	300	mm
passage hole in table	:	300 x 180	mm
stroke		:	20 - 150	mm
ram adjustment	:	85	mm
strokes per minute	:	70	min-¹
motor power	:	11,5	kw
dimensions machine wxdxh	:	2,25 x 1,20 x 2,36	m
weight machine ca.	:	5.100	kg
control		:	2-hands
machine is equipped with;
•	safety plate overload protection
•	auto. “vogel” lubrication system
 CAPACITY : 110 TON TABLE DIMENSIONS : 920 X 600 MM RAM DIMENSIONS : 540 X 290 MM SHUT HEIGHT MAX. : 440 MM THROAT : 300 MM PASSAGE HOLE IN TABLE : 300 X 180 MM STROKE : 20 - 150 MM RAM ADJUSTMENT : 85 MM STROKES PER MINUTE : 70 MIN-¹ MOTOR POWER : 11,5 KW DIMENSIONS MACHINE WXDXH : 2,25 X 1,20 X 2,36 M WEIGHT MACHINE CA. : 5.100 KG CONTROL : 2-HANDS MACHINE IS EQUIPPED WITH; • SAFETY PLATE OVERLOAD PROTECTION • AUTO. “VOGEL” LUBRICATION SYSTEM
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-AT Austria, 3100 Pölten
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-press bending press by bird & co.
press power 160 t
bending and set of steel beams, steel pipes, etc.
 PRESS BENDING PRESS BY BIRD & CO. PRESS POWER 160 T BENDING AND SET OF STEEL BEAMS, STEEL PIPES, ETC.
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Precio: used machinery auction RESALE 60 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 320 x 130 x 50 mm<br/>description: see photo WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 320 X 130 X 50 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-operating weight: 19300 kg; gesammtgewicht 21900 kg; amber beacon; in eco mode 125 kw / 1800 rpm; nominal power 129.6 kw/2000 rpm OPERATING WEIGHT: 19300 KG; GESAMMTGEWICHT 21900 KG; AMBER BEACON; IN ECO MODE 125 KW / 1800 RPM; NOMINAL POWER 129.6 KW/2000 RPM
Vendedor: Troostwijk Auctions
Año de construcción: usado
Precio: used machinery auction RESALE 60 €
Ubicación: Land-weight approx.: 4 kg<br/>dimensions (l x w x h) approx.: 440 x 150 x 60 mm<br/>description: see photo WEIGHT APPROX.: 4 KG
DIMENSIONS (L X W X H) APPROX.: 440 X 150 X 60 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-was used for perforating polyamid, can also be used for other materials like leather.  WAS USED FOR PERFORATING POLYAMID, CAN ALSO BE USED FOR OTHER MATERIALS LIKE LEATHER.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 175 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 650 €
Ubicación: Land-a the manufacturer of rexroth hydraulic unit is available here. it was taken from a fullfunktionsfã¤higen lathe.
type: from 30-05.01
fuel tank capacity: 250 l

total mass: 1000 x 600 x 1550 mm (lxwxh)

the unit includes the following components:

electric motor manfred vogel
power: 6.6 kw - 1760 rpm

rexroth lfps 160 0 1001.0
maximum operating pressure: 100 bar
content of the pressure chamber: 0.6 l

rexroth rfp 160 g10 a1. 1
maximum operating pressure: 30 bar
content of the pressure chamber: 0.9 l

for more information see also pictures or manufacturer's website.
sales invoice. the vat is issued on the account.
visit any time by appointment only possible and desirable.
it used no guarantee or warranty.
shipping possible. please enquire A THE MANUFACTURER OF REXROTH HYDRAULIC UNIT IS AVAILABLE HERE. IT WAS TAKEN FROM A FULLFUNKTIONSF&ATILDE;&CURREN;HIGEN LATHE. TYPE: FROM 30-05.01 FUEL TANK CAPACITY: 250 L TOTAL MASS: 1000 X 600 X 1550 MM (LXWXH) THE UNIT INCLUDES THE FOLLOWING COMPONENTS: ELECTRIC MOTOR MANFRED VOGEL POWER: 6.6 KW - 1760 RPM REXROTH LFPS 160 0 1001.0 MAXIMUM OPERATING PRESSURE: 100 BAR CONTENT OF THE PRESSURE CHAMBER: 0.6 L REXROTH RFP 160 G10 A1. 1 MAXIMUM OPERATING PRESSURE: 30 BAR CONTENT OF THE PRESSURE CHAMBER: 0.9 L FOR MORE INFORMATION SEE ALSO PICTURES OR MANUFACTURER'S WEBSITE. SALES INVOICE. THE VAT IS ISSUED ON THE ACCOUNT. VISIT ANY TIME BY APPOINTMENT ONLY POSSIBLE AND DESIRABLE. IT USED NO GUARANTEE OR WARRANTY. SHIPPING POSSIBLE. PLEASE ENQUIRE
Vendedor: TechnoMac - Maschinen, Roboter, Automatisierung
Año de construcción: usado
Precio: 95 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-working width: 2500mm, number of seed box outlets: 25, seed box capacity: 410l, transport width: 2600mm, track width: 2300mm, filling height: 1290mm, including 25 suffolk coulter, 700l seed tank and rotary harrow vogel  WORKING WIDTH: 2500MM, NUMBER OF SEED BOX OUTLETS: 25, SEED BOX CAPACITY: 410L, TRANSPORT WIDTH: 2600MM, TRACK WIDTH: 2300MM, FILLING HEIGHT: 1290MM, INCLUDING 25 SUFFOLK COULTER, 700L SEED TANK AND ROTARY HARROW VOGEL
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-please check the plaque for technical specifications.

if you need further information, please feel free to contact us via mail or phone. PLEASE CHECK THE PLAQUE FOR TECHNICAL SPECIFICATIONS. IF YOU NEED FURTHER INFORMATION, PLEASE FEEL FREE TO CONTACT US VIA MAIL OR PHONE.
Vendedor: Dimex Import Export
Año de construcción: usado
Precio: 64.800 €
Ubicación: Land-
* eng * for sale xcmg 755. description in english below.
* pl * do sprzeda?y xcmg 755  zapraszamy tak?e klientów z zagranicy. 
************************************************
this machine is ready to work straight after purchase. company did care about this machine, that's why it will serve well a few nice years without causing problems.
- we can arrange transport of this machine to your yard, at a very reasonable price because we have specialized semi-trailers.
- location: poland [post code]  05-610, [city] goszczyn. we invite you with a mechanic. there is nothing to hide. a service or an expert can be sent to the inspection.
- net price:  64 748 euro
- year of production: 2008
- mileage: 2 mh
- more information in english will be provide at telephone: (0048) 570 188 117  or e-mail: marcin.rejch@gmail.com

************************************************
- oferta warta przemy?lenia. po zakupie jest od r?ki gotowa do pracy. by?o o ni? dbane dlatego pos?u?y jeszcze ?adnych par? lat bez sprawiania k?opotów.  
- do ogl?dni?cia: pl 05-610 goszczyn. zapraszamy z mechanikiem. nie ma nic do ukrycia, nie boimy si?, dlatego na ogl?dziny mo?na wys?a? rzeczoznawc? lub serwis. 
- cena netto:  270 000  pln 
- rok produkcji:  2008
- przebieg:   2 mh
- wi?cej informacji pod telefonem: 57 018 81 17  
-  nowy xcmg 755 na licencji vogele. typ silnika deutz d6114, podwozie g?sienicowe o nap?dzie hydrostatycznym . maksymalna grubo?? warstwy bazowej od 8-18cm, warstwy klej?cej od 3,5-8cm warstwy podbudowy 15-25cm. pojemno?? kosza zasypowego 13t, g?adko?? 3mm-3m, moc generatora 20kw. stó? z ubijakiem i wibratorem i 8 palnikami. palniki z automatyczn? regulacj? temperatury listwy z 3 czujnikami. stó? rozsuwany o szeroko?ci od 3-7,5m, system wspomagania sto?u, podajnik rewersyjny z hydrauliczn? regulacj? wysoko?ci. pr?dko?ci kontroli pracy podajnika ?rubowego czujnikiem ultrad?wi?kowym i elektryczny system auto poziomowania.

niniejsze og?oszenie jest wy??cznie informacj? handlow? i nie stanowi oferty w my?l art. 66, paragraf 1. kodeksu cywilnego. sprzedaj?cy nie odpowiada za ewentualne b??dy lub nieaktualno?? og?oszenia.


 * ENG * FOR SALE XCMG 755. DESCRIPTION IN ENGLISH BELOW. * PL * DO SPRZEDA?Y XCMG 755 ZAPRASZAMY TAK?E KLIENTóW Z ZAGRANICY. ************************************************ THIS MACHINE IS READY TO WORK STRAIGHT AFTER PURCHASE. COMPANY DID CARE ABOUT THIS MACHINE, THAT'S WHY IT WILL SERVE WELL A FEW NICE YEARS WITHOUT CAUSING PROBLEMS. - WE CAN ARRANGE TRANSPORT OF THIS MACHINE TO YOUR YARD, AT A VERY REASONABLE PRICE BECAUSE WE HAVE SPECIALIZED SEMI-TRAILERS. - LOCATION: POLAND [POST CODE] 05-610, [CITY] GOSZCZYN. WE INVITE YOU WITH A MECHANIC. THERE IS NOTHING TO HIDE. A SERVICE OR AN EXPERT CAN BE SENT TO THE INSPECTION. - NET PRICE: 64 748 EURO - YEAR OF PRODUCTION: 2008 - MILEAGE: 2 MH - MORE INFORMATION IN ENGLISH WILL BE PROVIDE AT TELEPHONE: (0048) 570 188 117 OR E-MAIL: MARCIN.REJCH@GMAIL.COM ************************************************ - OFERTA WARTA PRZEMY?LENIA. PO ZAKUPIE JEST OD R?KI GOTOWA DO PRACY. BY?O O NI? DBANE DLATEGO POS?U?Y JESZCZE ?ADNYCH PAR? LAT BEZ SPRAWIANIA K?OPOTóW. - DO OGL?DNI?CIA: PL 05-610 GOSZCZYN. ZAPRASZAMY Z MECHANIKIEM. NIE MA NIC DO UKRYCIA, NIE BOIMY SI?, DLATEGO NA OGL?DZINY MO?NA WYS?A? RZECZOZNAWC? LUB SERWIS. - CENA NETTO: 270 000 PLN - ROK PRODUKCJI: 2008 - PRZEBIEG: 2 MH - WI?CEJ INFORMACJI POD TELEFONEM: 57 018 81 17 - NOWY XCMG 755 NA LICENCJI VOGELE. TYP SILNIKA DEUTZ D6114, PODWOZIE G?SIENICOWE O NAP?DZIE HYDROSTATYCZNYM . MAKSYMALNA GRUBO?? WARSTWY BAZOWEJ OD 8-18CM, WARSTWY KLEJ?CEJ OD 3,5-8CM WARSTWY PODBUDOWY 15-25CM. POJEMNO?? KOSZA ZASYPOWEGO 13T, G?ADKO?? 3MM-3M, MOC GENERATORA 20KW. STó? Z UBIJAKIEM I WIBRATOREM I 8 PALNIKAMI. PALNIKI Z AUTOMATYCZN? REGULACJ? TEMPERATURY LISTWY Z 3 CZUJNIKAMI. STó? ROZSUWANY O SZEROKO?CI OD 3-7,5M, SYSTEM WSPOMAGANIA STO?U, PODAJNIK REWERSYJNY Z HYDRAULICZN? REGULACJ? WYSOKO?CI. PR?DKO?CI KONTROLI PRACY PODAJNIKA ?RUBOWEGO CZUJNIKIEM ULTRAD?WI?KOWYM I ELEKTRYCZNY SYSTEM AUTO POZIOMOWANIA. NINIEJSZE OG?OSZENIE JEST WY??CZNIE INFORMACJ? HANDLOW? I NIE STANOWI OFERTY W MY?L ART. 66, PARAGRAF 1. KODEKSU CYWILNEGO. SPRZEDAJ?CY NIE ODPOWIADA ZA EWENTUALNE B??DY LUB NIEAKTUALNO?? OG?OSZENIA.
Vendedor: SWENSKA POWERHOUSE Marcin Piotr Rejch
Año de construcción: usado
Ubicación: Land-please check the plaque for technical specifications.

if you need further information, please feel free to contact us via mail or phone. PLEASE CHECK THE PLAQUE FOR TECHNICAL SPECIFICATIONS. IF YOU NEED FURTHER INFORMATION, PLEASE FEEL FREE TO CONTACT US VIA MAIL OR PHONE.
Vendedor: Dimex Import Export
Año de construcción: usado
Precio: 67.146 €
Ubicación: Land-* pl * for sale vogele super 1800-1zapraszamy customers from abroad. 
* eng * for sale vogele super 1800-1 description in english below.

************************************************
-offer worth rethinking. the machine is used in the company for 6 years. after the purchase is immediately ready to work. was it dbane therefore will still quite a few years without making trouble.  
-to have a look: en 05-200 zago?ciniec. welcome to the mechanic. there is nothing to hide, we are not afraid, therefore, on visual inspection, you can send an expert or service. 
-net price: 280 000 pln-year of production: 2004
-mileage: 10488 mh
for more information phone: 57 018 81 17-in addition to widen the screed 2 x 1.25 m. complete bulldozing. the machine in continuous operation.
this announcement is only a commercial information and does not constitute an offer, pursuant to art. 66, paragraph 1. of the civil code. the seller is not responsible for any errors or inaccuracies in the classifieds.
************************************************
this machine is ready to work straight after purchase. the machine was used in the company for 6 years.  company did care about this machine, that's why it will serve well a few nice years without causing problems.
-we can arrange transport of this machine to your yard, at a very reasonable price.
-location: poland [post code] 05-200, [city] zago?ciniec. in invite you with a mechanic. there is nothing to hide. a service or an expert can be sent to the inspection.
-net price: 67 146 euro
-year of production: 2004
-mileage: 10488 mh
-more information in english will be provide at telephone: (0048) 570 188 117 or email: marcin.rejch@gmail.com
************************************************

* PL * FOR SALE VOGELE SUPER 1800-1ZAPRASZAMY CUSTOMERS FROM ABROAD. * ENG * FOR SALE VOGELE SUPER 1800-1 DESCRIPTION IN ENGLISH BELOW. ************************************************ -OFFER WORTH RETHINKING. THE MACHINE IS USED IN THE COMPANY FOR 6 YEARS. AFTER THE PURCHASE IS IMMEDIATELY READY TO WORK. WAS IT DBANE THEREFORE WILL STILL QUITE A FEW YEARS WITHOUT MAKING TROUBLE. -TO HAVE A LOOK: EN 05-200 ZAGO?CINIEC. WELCOME TO THE MECHANIC. THERE IS NOTHING TO HIDE, WE ARE NOT AFRAID, THEREFORE, ON VISUAL INSPECTION, YOU CAN SEND AN EXPERT OR SERVICE. -NET PRICE: 280 000 PLN-YEAR OF PRODUCTION: 2004 -MILEAGE: 10488 MH FOR MORE INFORMATION PHONE: 57 018 81 17-IN ADDITION TO WIDEN THE SCREED 2 X 1.25 M. COMPLETE BULLDOZING. THE MACHINE IN CONTINUOUS OPERATION. THIS ANNOUNCEMENT IS ONLY A COMMERCIAL INFORMATION AND DOES NOT CONSTITUTE AN OFFER, PURSUANT TO ART. 66, PARAGRAPH 1. OF THE CIVIL CODE. THE SELLER IS NOT RESPONSIBLE FOR ANY ERRORS OR INACCURACIES IN THE CLASSIFIEDS. ************************************************ THIS MACHINE IS READY TO WORK STRAIGHT AFTER PURCHASE. THE MACHINE WAS USED IN THE COMPANY FOR 6 YEARS. COMPANY DID CARE ABOUT THIS MACHINE, THAT'S WHY IT WILL SERVE WELL A FEW NICE YEARS WITHOUT CAUSING PROBLEMS. -WE CAN ARRANGE TRANSPORT OF THIS MACHINE TO YOUR YARD, AT A VERY REASONABLE PRICE. -LOCATION: POLAND [POST CODE] 05-200, [CITY] ZAGO?CINIEC. IN INVITE YOU WITH A MECHANIC. THERE IS NOTHING TO HIDE. A SERVICE OR AN EXPERT CAN BE SENT TO THE INSPECTION. -NET PRICE: 67 146 EURO -YEAR OF PRODUCTION: 2004 -MILEAGE: 10488 MH -MORE INFORMATION IN ENGLISH WILL BE PROVIDE AT TELEPHONE: (0048) 570 188 117 OR EMAIL: MARCIN.REJCH@GMAIL.COM ************************************************
Vendedor: SWENSKA POWERHOUSE Marcin Piotr Rejch
Año de construcción: usado
Precio: 175 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-round shot blasting machine
manufacturer: bird & schemmann
built in 1975

ROUND SHOT BLASTING MACHINE MANUFACTURER: BIRD & SCHEMMANN BUILT IN 1975
Vendedor: METEC GmbH
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 65.000 €
Ubicación: Land-vogele xcmg 755

to have a look: 05-610 goszczyn

very good condition!

net price: 270 000 eur

production year 2008

process 2 mth

feel free to contact-phone: (0048) 570 188 117 marcin rejch i have for sale a paver and concrete brand new company xcmg 755 licensed vogele. type of engine deutz d6114, track-type undercarriage hydrostatic drive. the maximum thickness of base layers from 8-18 cm, adhesive from 3.5-8 cm layer of the base 15-25 cm. capacity hopper 13t, the smoothness of the 3 mm-3 m, the power of 20kw generator. table 3 tie and dildo and 8-burner stove. burners with automatic temperature control strips with 3 sensors. slide table width from 3-7, 5 m, table, reciprocating feeder support system with hydraulic height adjustment. speed control of ultrasonic sensor screw feeder and electrical system auto-leveling.
 
purchase only and only after seeing on the spot!
this announcement is only a commercial information and does not constitute an offer, pursuant to art. 66, paragraph 1. of the civil code. the seller is not responsible for any errors or inaccuracies in the classifieds.
 VOGELE XCMG 755 TO HAVE A LOOK: 05-610 GOSZCZYN VERY GOOD CONDITION! NET PRICE: 270 000 EUR PRODUCTION YEAR 2008 PROCESS 2 MTH FEEL FREE TO CONTACT-PHONE: (0048) 570 188 117 MARCIN REJCH I HAVE FOR SALE A PAVER AND CONCRETE BRAND NEW COMPANY XCMG 755 LICENSED VOGELE. TYPE OF ENGINE DEUTZ D6114, TRACK-TYPE UNDERCARRIAGE HYDROSTATIC DRIVE. THE MAXIMUM THICKNESS OF BASE LAYERS FROM 8-18 CM, ADHESIVE FROM 3.5-8 CM LAYER OF THE BASE 15-25 CM. CAPACITY HOPPER 13T, THE SMOOTHNESS OF THE 3 MM-3 M, THE POWER OF 20KW GENERATOR. TABLE 3 TIE AND DILDO AND 8-BURNER STOVE. BURNERS WITH AUTOMATIC TEMPERATURE CONTROL STRIPS WITH 3 SENSORS. SLIDE TABLE WIDTH FROM 3-7, 5 M, TABLE, RECIPROCATING FEEDER SUPPORT SYSTEM WITH HYDRAULIC HEIGHT ADJUSTMENT. SPEED CONTROL OF ULTRASONIC SENSOR SCREW FEEDER AND ELECTRICAL SYSTEM AUTO-LEVELING. PURCHASE ONLY AND ONLY AFTER SEEING ON THE SPOT! THIS ANNOUNCEMENT IS ONLY A COMMERCIAL INFORMATION AND DOES NOT CONSTITUTE AN OFFER, PURSUANT TO ART. 66, PARAGRAPH 1. OF THE CIVIL CODE. THE SELLER IS NOT RESPONSIBLE FOR ANY ERRORS OR INACCURACIES IN THE CLASSIFIEDS.
Vendedor: SWENSKA POWERHOUSE Marcin Piotr Rejch
Año de construcción: usado
Precio: 55 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-format: width 60-160mm, height 45mm.  FORMAT: WIDTH 60-160MM, HEIGHT 45MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 175 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land- bandsnijmachine fam mantis
de fam mantis tranverse slicer is een ééndimensionale snijmachine, geschikt voor het dwarssnijden van verschillende langwerpige en ovale voedingsmiddelen (zowel vlaksnit als golfsnit). de mantis heeft een groot voedingskanaal (160mm), waardoor grote volumes aan producten kwetsvrij en nauwkeurig gesneden kunnen worden. de transportbanden in het v-vormige voedingskanaal zorgen ervoor dat het product automatisch gepositioneerd wordt en dat het product aan hoge snelheid tot het snijwiel gebracht wordt.

de mantis transverse slicer is volledig vervaardigd uit roestvrij staal
voorzien van ergonomisch zwenkbaar bedieningspaneel (aanraakscherm)
geschikt voor langwerpige als ovale producten: groente, fruit, aardappelen, vlees, vis, gevogelte (veel snijvormen mogelijk op een brede waaier aan producten)
productiecapaciteit: tot 8000kg/h (afhankelijk van het te snijden product)
aangedreven bovenband voor perfecte productgeleiding
de productzone is volledig van de aandrijfzone gescheiden
snijvormen: vlaksnit en golfsnit schijfjes: heel, gehalveerd, kwartjes
snijmaten: verschillende snijmaten mogelijk tussen 0.8mm en 60mm
max. productdiameter: 112mm voor harde producten, 160mm voor bladgroenten
gewicht: 500kg
bouwjaar: 2004
spanning: 400v (3ph 50hz)
vermogen: 3.5kw
afmetingen machine in cm (bxdxh): 316x109x188 BANDSNIJMACHINE FAM MANTIS DE FAM MANTIS TRANVERSE SLICER IS EEN ééNDIMENSIONALE SNIJMACHINE, GESCHIKT VOOR HET DWARSSNIJDEN VAN VERSCHILLENDE LANGWERPIGE EN OVALE VOEDINGSMIDDELEN (ZOWEL VLAKSNIT ALS GOLFSNIT). DE MANTIS HEEFT EEN GROOT VOEDINGSKANAAL (160MM), WAARDOOR GROTE VOLUMES AAN PRODUCTEN KWETSVRIJ EN NAUWKEURIG GESNEDEN KUNNEN WORDEN. DE TRANSPORTBANDEN IN HET V-VORMIGE VOEDINGSKANAAL ZORGEN ERVOOR DAT HET PRODUCT AUTOMATISCH GEPOSITIONEERD WORDT EN DAT HET PRODUCT AAN HOGE SNELHEID TOT HET SNIJWIEL GEBRACHT WORDT. DE MANTIS TRANSVERSE SLICER IS VOLLEDIG VERVAARDIGD UIT ROESTVRIJ STAAL VOORZIEN VAN ERGONOMISCH ZWENKBAAR BEDIENINGSPANEEL (AANRAAKSCHERM) GESCHIKT VOOR LANGWERPIGE ALS OVALE PRODUCTEN: GROENTE, FRUIT, AARDAPPELEN, VLEES, VIS, GEVOGELTE (VEEL SNIJVORMEN MOGELIJK OP EEN BREDE WAAIER AAN PRODUCTEN) PRODUCTIECAPACITEIT: TOT 8000KG/H (AFHANKELIJK VAN HET TE SNIJDEN PRODUCT) AANGEDREVEN BOVENBAND VOOR PERFECTE PRODUCTGELEIDING DE PRODUCTZONE IS VOLLEDIG VAN DE AANDRIJFZONE GESCHEIDEN SNIJVORMEN: VLAKSNIT EN GOLFSNIT SCHIJFJES: HEEL, GEHALVEERD, KWARTJES SNIJMATEN: VERSCHILLENDE SNIJMATEN MOGELIJK TUSSEN 0.8MM EN 60MM MAX. PRODUCTDIAMETER: 112MM VOOR HARDE PRODUCTEN, 160MM VOOR BLADGROENTEN GEWICHT: 500KG BOUWJAAR: 2004 SPANNING: 400V (3PH 50HZ) VERMOGEN: 3.5KW AFMETINGEN MACHINE IN CM (BXDXH): 316X109X188
Vendedor: Areska Food Machines
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-year of construction: 1990
control: siemens 3m 4c.
x-axis: 2 x 720 mm / 2300 mm
y-axis: 500 mm
z-axis : 480 mm
main spindle speed: 6000 rpm.
power: 11,5 kw
x-axis: diameter 40 x 20
y-axis: diameter 40 x 10
z-axis: diameter 40 x 5
floor space requirements:
length: 5040 mm
width: 2070 mm
height: 2700 mm
weight: 7200 kg

1 tool clamp for sk 40 din 69871
1 travelling tool changer for 30 holders
heidenhain measuring system
vogel central lubricating unit 
axa hydraulic unit

-technical errors and prior sale reserved. -    YEAR OF CONSTRUCTION: 1990 CONTROL: SIEMENS 3M 4C. X-AXIS: 2 X 720 MM / 2300 MM Y-AXIS: 500 MM Z-AXIS : 480 MM MAIN SPINDLE SPEED: 6000 RPM. POWER: 11,5 KW X-AXIS: DIAMETER 40 X 20 Y-AXIS: DIAMETER 40 X 10 Z-AXIS: DIAMETER 40 X 5 FLOOR SPACE REQUIREMENTS: LENGTH: 5040 MM WIDTH: 2070 MM HEIGHT: 2700 MM WEIGHT: 7200 KG 1 TOOL CLAMP FOR SK 40 DIN 69871 1 TRAVELLING TOOL CHANGER FOR 30 HOLDERS HEIDENHAIN MEASURING SYSTEM VOGEL CENTRAL LUBRICATING UNIT AXA HYDRAULIC UNIT -TECHNICAL ERRORS AND PRIOR SALE RESERVED. -
Vendedor: Johannes Wiebel Werkzeugmaschinen & Industrieanlagen
Año de construcción: usado
Precio: 55 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-extending screed accessory for voegele 1600, 1800, 1900 and 2100 
new, complete
pave width: 3m - 9.5m
basic width: 3m
infinitely variable range: 3m - 6m
bolt-on extensions: 25cm/ 75cm/ 125cm
crown adjustment	
infinitely variable range: -2.5% up to 5%
tamper: tamper speed up to 1,800rpm
        tamper stroke adjustable (tp1/tp2) to 2mm, 4mm, 7mm
        tamper stroke adjustable (tp2 plus) to 4mm, 7mm, 9mm
pressure bar(s) (p)- driven by pulsed-flow hydraulics
   - impulse recurrence frequency 68hz
   - hydraulic oil pressure up to 120 bar
screed heating: electric by heating rods
width: 3m
depth: 1.28 m 
weight: 3.65 t

ex works timisoara, ro

we speak english. wir sprechen deutsch. (+40 740-221.698 )
hablamos espanol. beszelunk magyarul. (+40 743-177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila.
    EXTENDING SCREED ACCESSORY FOR VOEGELE 1600, 1800, 1900 AND 2100 NEW, COMPLETE PAVE WIDTH: 3M - 9.5M BASIC WIDTH: 3M INFINITELY VARIABLE RANGE: 3M - 6M BOLT-ON EXTENSIONS: 25CM/ 75CM/ 125CM CROWN ADJUSTMENT INFINITELY VARIABLE RANGE: -2.5% UP TO 5% TAMPER: TAMPER SPEED UP TO 1,800RPM TAMPER STROKE ADJUSTABLE (TP1/TP2) TO 2MM, 4MM, 7MM TAMPER STROKE ADJUSTABLE (TP2 PLUS) TO 4MM, 7MM, 9MM PRESSURE BAR(S) (P)- DRIVEN BY PULSED-FLOW HYDRAULICS - IMPULSE RECURRENCE FREQUENCY 68HZ - HYDRAULIC OIL PRESSURE UP TO 120 BAR SCREED HEATING: ELECTRIC BY HEATING RODS WIDTH: 3M DEPTH: 1.28 M WEIGHT: 3.65 T EX WORKS TIMISOARA, RO WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40 740-221.698 ) HABLAMOS ESPANOL. BESZELUNK MAGYARUL. (+40 743-177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 200 €
Ubicación: Land-container 2,7l

the lubrication unit is ce compliant

the cables remain aware of it to give you

the reconnection to simplify.
 CONTAINER 2,7L THE LUBRICATION UNIT IS CE COMPLIANT THE CABLES REMAIN AWARE OF IT TO GIVE YOU THE RECONNECTION TO SIMPLIFY.
Vendedor: Lippke Industriedienstleistungen
Año de construcción: usado
Precio: 175 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-used belt press made by slovakia company vanex with the control panel vx-opl, polyelectrolyte preparation station, rinse water tank, sludge pump, pump water to the washer.
press consists of the following basic components and assemblies:
· frame,
· pneumatic control panel,
· fight, bathtubs drip,
· electrical installation,
· crater density,
· two filter strips,
· filtrate drainage systems,
· drive unit.
the device parameters:
dimensions: 4.62 x 1.95 x 1.85 [m]
weight: 2 580 [kg]
filter strip width: 0.80 [m]
performance of the press; 4.0 - 10.0 [m3 / h] at 4% initial concentration
the belt press:
the precipitate is fed by the flocculator dynamic vx-fz on the upper belt filter, which is distributed by the distribution strip and wherein in a so-called. gravity zone runs gravity drainage.
at the end of this zone, wherein the width of the outlet can be adjusted by changing the width of the upper bed with a screw feed astringent dewatered sludge goes to the lower filter belt, and is then transported by gravity to the lower zone of the pressure zone which forms eight rolls of various sizes. the dewatered cake blanket at the end of the pressure zone separated by ?cieraków and directed onto the belt. the remaining tape impurities are removed jets of water under pressure from the washer. washing intensity can be adjusted by means of ball valves installed separately on each washer. filter tape tension, and hence the degree of dehydration is effected by means of tensioning roller pressed against the belt by hydraulic cylinders.
electrical sensors control the position of the filter strip, in the fight to prevent hydraulic rams pressed forgiveness tapes. in case if they failed sensors, electrical additional locking sensor turns off the entire line dewatering. a similar function has a presence stop surrounding the entire device.
installing plumbing:
consisting of:
- hydraulic pump
- pressure sensor
- oil tank
- gauges
- pressure regulator lower and upper cylinder tensioning
polyelectrolyte preparation station:
is an independent device for automatic preparation of solutions of given concentrations of continuously adjustable amount and concentration of the solution and start the pump flocculant.
consisting of:
- dissolving tank
- storage tank
- powder dispenser
- stirring the solution
- solution pump
- a set of pipes and valves
- sensors
- handling pump
- electricity distribution
sludge pump:
vogelsang rotary pump vx100-64q - to guarantee up to 07.11.2015 r. (time work a few hours)
ew. allweiler screw type pump 201 to repair tecflow
washer water pump:
sigma pump 40 cvx -4-lc-000-9
process water tank:
it is used to secure the appropriate quantity and quality of water (through internal screen) water used to rinse the filter belt press belts.   USED BELT PRESS MADE BY SLOVAKIA COMPANY VANEX WITH THE CONTROL PANEL VX-OPL, POLYELECTROLYTE PREPARATION STATION, RINSE WATER TANK, SLUDGE PUMP, PUMP WATER TO THE WASHER. PRESS CONSISTS OF THE FOLLOWING BASIC COMPONENTS AND ASSEMBLIES: · FRAME, · PNEUMATIC CONTROL PANEL, · FIGHT, BATHTUBS DRIP, · ELECTRICAL INSTALLATION, · CRATER DENSITY, · TWO FILTER STRIPS, · FILTRATE DRAINAGE SYSTEMS, · DRIVE UNIT. THE DEVICE PARAMETERS: DIMENSIONS: 4.62 X 1.95 X 1.85 [M] WEIGHT: 2 580 [KG] FILTER STRIP WIDTH: 0.80 [M] PERFORMANCE OF THE PRESS; 4.0 - 10.0 [M3 / H] AT 4% INITIAL CONCENTRATION THE BELT PRESS: THE PRECIPITATE IS FED BY THE FLOCCULATOR DYNAMIC VX-FZ ON THE UPPER BELT FILTER, WHICH IS DISTRIBUTED BY THE DISTRIBUTION STRIP AND WHEREIN IN A SO-CALLED. GRAVITY ZONE RUNS GRAVITY DRAINAGE. AT THE END OF THIS ZONE, WHEREIN THE WIDTH OF THE OUTLET CAN BE ADJUSTED BY CHANGING THE WIDTH OF THE UPPER BED WITH A SCREW FEED ASTRINGENT DEWATERED SLUDGE GOES TO THE LOWER FILTER BELT, AND IS THEN TRANSPORTED BY GRAVITY TO THE LOWER ZONE OF THE PRESSURE ZONE WHICH FORMS EIGHT ROLLS OF VARIOUS SIZES. THE DEWATERED CAKE BLANKET AT THE END OF THE PRESSURE ZONE SEPARATED BY ?CIERAKóW AND DIRECTED ONTO THE BELT. THE REMAINING TAPE IMPURITIES ARE REMOVED JETS OF WATER UNDER PRESSURE FROM THE WASHER. WASHING INTENSITY CAN BE ADJUSTED BY MEANS OF BALL VALVES INSTALLED SEPARATELY ON EACH WASHER. FILTER TAPE TENSION, AND HENCE THE DEGREE OF DEHYDRATION IS EFFECTED BY MEANS OF TENSIONING ROLLER PRESSED AGAINST THE BELT BY HYDRAULIC CYLINDERS. ELECTRICAL SENSORS CONTROL THE POSITION OF THE FILTER STRIP, IN THE FIGHT TO PREVENT HYDRAULIC RAMS PRESSED FORGIVENESS TAPES. IN CASE IF THEY FAILED SENSORS, ELECTRICAL ADDITIONAL LOCKING SENSOR TURNS OFF THE ENTIRE LINE DEWATERING. A SIMILAR FUNCTION HAS A PRESENCE STOP SURROUNDING THE ENTIRE DEVICE. INSTALLING PLUMBING: CONSISTING OF: - HYDRAULIC PUMP - PRESSURE SENSOR - OIL TANK - GAUGES - PRESSURE REGULATOR LOWER AND UPPER CYLINDER TENSIONING POLYELECTROLYTE PREPARATION STATION: IS AN INDEPENDENT DEVICE FOR AUTOMATIC PREPARATION OF SOLUTIONS OF GIVEN CONCENTRATIONS OF CONTINUOUSLY ADJUSTABLE AMOUNT AND CONCENTRATION OF THE SOLUTION AND START THE PUMP FLOCCULANT. CONSISTING OF: - DISSOLVING TANK - STORAGE TANK - POWDER DISPENSER - STIRRING THE SOLUTION - SOLUTION PUMP - A SET OF PIPES AND VALVES - SENSORS - HANDLING PUMP - ELECTRICITY DISTRIBUTION SLUDGE PUMP: VOGELSANG ROTARY PUMP VX100-64Q - TO GUARANTEE UP TO 07.11.2015 R. (TIME WORK A FEW HOURS) EW. ALLWEILER SCREW TYPE PUMP 201 TO REPAIR TECFLOW WASHER WATER PUMP: SIGMA PUMP 40 CVX -4-LC-000-9 PROCESS WATER TANK: IT IS USED TO SECURE THE APPROPRIATE QUANTITY AND QUALITY OF WATER (THROUGH INTERNAL SCREEN) WATER USED TO RINSE THE FILTER BELT PRESS BELTS.
Vendedor: Industrio Service
Año de construcción: usado
Precio: 3.800 €
Ubicación: Land-; accessories: anzahl schare:4, packerarm, stützfuß / -rad ; ACCESSORIES: ANZAHL SCHARE:4, PACKERARM, STüTZFUß / -RAD
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-komplete pump on steel frame.
kbo vogel  lsni 80-50-160    KOMPLETE PUMP ON STEEL FRAME. KBO VOGEL LSNI 80-50-160
Vendedor: AssistEquipment AS
Año de construcción: usado
Ubicación: Land-length: 3000 mm<br/>width: 1000 mm<br/>height: 2400 mm<br/>weight: 800 kg<br/>#5098 neue farbnebelabsaugwand nestro typ nfw 3024<br/>-------------------------------------------------------------------------------------------------<br/>die nestro-farbnebel-absaugwände typ nfw mit trockenabscheidung sorgen für eine wirtschaftlich günstige spritzraumentlüftung und tragen somit zum arbeits- und gesundheitsschutz bei. die oberflächengüte ihrer bauteile wird durch die geregelten luftverhältnisse wesentlich verbessert. die farbnebel-absaugwand ist mit zweifach gestaffelten prallblechen und einem trockennachfilter ausgerüstet. durch diese abscheide- und filterkombination erreichen wir einen hohen abscheidegrad und eine günstige absaugleistung an der gesamten erfassungsfläche. <br/>die spritzwandbauteile können mit einem abziehlack behandelt werden und lassen sich im bedarfsfall leicht reinigen. um die erfassungsfläche zu vergrößern kann die spritzwand mit seitlichen und einem oberen leitblechen augerüstet werden (optional).<br/><br/>technische daten:<br/>ventilatorleistung: 2,5 kw ex-geschützt<br/>anschluss: 380 v / 6,65 a<br/>luftleistung: ca. 9.600 m³/h<br/>pressung, druckseitig: ca. 550 pa<br/>abluftdurchmesser: 450 mm<br/>erfassungsfläche: 3.000 x 2.400 mm<br/>gerätetiefe: 900 mm<br/>gewicht: 413 kg<br/><br/>1 neue lamellenspritzwand typ nfw3024, 3000 x 2400 mm, 9600 cbm/h<br/>preis in euro: 5.792,00<br/>---------------------------------------------------------------------------------<br/><br/>1 paar seitliche leitbleche 500 mm breit<br/>preis in euro: 242,20<br/><br/>---------------------------------------------------------------------------------<br/><br/>2 stk. rohrbogen 90° d = 450 mm<br/>preis pro stk in euro: 129,80 = 259,60 euro<br/><br/>---------------------------------------------------------------------------------<br/><br/>4 rohr 1000 mm lang, d=450 mm, s=1,0 mm zn<br/>preis pro stk in euro: 53,00 = 212,00 euro<br/><br/>---------------------------------------------------------------------------------<br/><br/>1 regenabweiser d=450 mm mit vogelschutzgitter<br/>preis in euro: 94,50<br/><br/>---------------------------------------------------------------------------------<br/><br/>9 rohrschellen d = 450 mm<br/>preis pro stk in euro: 5,00 = 45,00 euro<br/>---------------------------------------------------------------------------------<br/><br/>1/4 rolle dichtungsband<br/>preis in euro: 10,93<br/><br/>---------------------------------------------------------------------------------<br/>verpackungs- und versandkosten nach 73447 oberkochen<br/>preis in euro: 315,00<br/><br/>techn. angaben laut hersteller - ohne gewähr!<br/>alle hier genenannten preise verstehen sich zzgl. der aktuell gültigen mwst. (inland)<br/><br/><br/><br/> LENGTH: 3000 MM
WIDTH: 1000 MM
HEIGHT: 2400 MM
WEIGHT: 800 KG
#5098 NEUE FARBNEBELABSAUGWAND NESTRO TYP NFW 3024
-------------------------------------------------------------------------------------------------
DIE NESTRO-FARBNEBEL-ABSAUGWäNDE TYP NFW MIT TROCKENABSCHEIDUNG SORGEN FüR EINE WIRTSCHAFTLICH GüNSTIGE SPRITZRAUMENTLüFTUNG UND TRAGEN SOMIT ZUM ARBEITS- UND GESUNDHEITSSCHUTZ BEI. DIE OBERFLäCHENGüTE IHRER BAUTEILE WIRD DURCH DIE GEREGELTEN LUFTVERHäLTNISSE WESENTLICH VERBESSERT. DIE FARBNEBEL-ABSAUGWAND IST MIT ZWEIFACH GESTAFFELTEN PRALLBLECHEN UND EINEM TROCKENNACHFILTER AUSGERüSTET. DURCH DIESE ABSCHEIDE- UND FILTERKOMBINATION ERREICHEN WIR EINEN HOHEN ABSCHEIDEGRAD UND EINE GüNSTIGE ABSAUGLEISTUNG AN DER GESAMTEN ERFASSUNGSFLäCHE.
DIE SPRITZWANDBAUTEILE KöNNEN MIT EINEM ABZIEHLACK BEHANDELT WERDEN UND LASSEN SICH IM BEDARFSFALL LEICHT REINIGEN. UM DIE ERFASSUNGSFLäCHE ZU VERGRößERN KANN DIE SPRITZWAND MIT SEITLICHEN UND EINEM OBEREN LEITBLECHEN AUGERüSTET WERDEN (OPTIONAL).

TECHNISCHE DATEN:
VENTILATORLEISTUNG: 2,5 KW EX-GESCHüTZT
ANSCHLUSS: 380 V / 6,65 A
LUFTLEISTUNG: CA. 9.600 M³/H
PRESSUNG, DRUCKSEITIG: CA. 550 PA
ABLUFTDURCHMESSER: 450 MM
ERFASSUNGSFLäCHE: 3.000 X 2.400 MM
GERäTETIEFE: 900 MM
GEWICHT: 413 KG

1 NEUE LAMELLENSPRITZWAND TYP NFW3024, 3000 X 2400 MM, 9600 CBM/H
PREIS IN EURO: 5.792,00
---------------------------------------------------------------------------------

1 PAAR SEITLICHE LEITBLECHE 500 MM BREIT
PREIS IN EURO: 242,20

---------------------------------------------------------------------------------

2 STK. ROHRBOGEN 90° D = 450 MM
PREIS PRO STK IN EURO: 129,80 = 259,60 EURO

---------------------------------------------------------------------------------

4 ROHR 1000 MM LANG, D=450 MM, S=1,0 MM ZN
PREIS PRO STK IN EURO: 53,00 = 212,00 EURO

---------------------------------------------------------------------------------

1 REGENABWEISER D=450 MM MIT VOGELSCHUTZGITTER
PREIS IN EURO: 94,50

---------------------------------------------------------------------------------

9 ROHRSCHELLEN D = 450 MM
PREIS PRO STK IN EURO: 5,00 = 45,00 EURO
---------------------------------------------------------------------------------

1/4 ROLLE DICHTUNGSBAND
PREIS IN EURO: 10,93

---------------------------------------------------------------------------------
VERPACKUNGS- UND VERSANDKOSTEN NACH 73447 OBERKOCHEN
PREIS IN EURO: 315,00

TECHN. ANGABEN LAUT HERSTELLER - OHNE GEWäHR!
ALLE HIER GENENANNTEN PREISE VERSTEHEN SICH ZZGL. DER AKTUELL GüLTIGEN MWST. (INLAND)



Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-sterile tank electropolished 18,100 litres, double coat, interior
product area: 4 bar pressure-resistant / vacuum
material: 1.4435 / v4a / 316l
jacket: 4 bar pressure-resistant
material: 1.4404 / v4a / 316l STERILE TANK ELECTROPOLISHED 18,100 LITRES, DOUBLE COAT, INTERIOR PRODUCT AREA: 4 BAR PRESSURE-RESISTANT / VACUUM MATERIAL: 1.4435 / V4A / 316L JACKET: 4 BAR PRESSURE-RESISTANT MATERIAL: 1.4404 / V4A / 316L
Vendedor: Remontag
Año de construcción: usado
Precio: 5.700 €
Ubicación: Land-; accessories: anzahl schare:4, streifenkörper, stützfuß / -rad ; ACCESSORIES: ANZAHL SCHARE:4, STREIFENKöRPER, STüTZFUß / -RAD
Vendedor: Fritz Brandt Landmaschinenhandel
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more VOGEL types: