46 ofertas

Año de construcción: usado
Ubicación: Land-nominal mass of drop parts kg           3150 
rated striking energy                   80 kj 
max. no. of blows/min.                  56
distance clear between columns:         2800 mm.
working zone daylight:                  630 mm.
bottom die impression-to-floor distance:750 mm.
die impression size:                    600 x 340 mm.
steam/air pressure                      0.7-0.9 mpa
copressed air pressure                  0.6-0.8 mpa
overal dimensions                       5100x2490x5895 mm
mass (less anvil block)                 27,4 tons 
mass of anvil block                     47,2 tons 
  NOMINAL MASS OF DROP PARTS KG 3150 RATED STRIKING ENERGY 80 KJ MAX. NO. OF BLOWS/MIN. 56 DISTANCE CLEAR BETWEEN COLUMNS: 2800 MM. WORKING ZONE DAYLIGHT: 630 MM. BOTTOM DIE IMPRESSION-TO-FLOOR DISTANCE:750 MM. DIE IMPRESSION SIZE: 600 X 340 MM. STEAM/AIR PRESSURE 0.7-0.9 MPA COPRESSED AIR PRESSURE 0.6-0.8 MPA OVERAL DIMENSIONS 5100X2490X5895 MM MASS (LESS ANVIL BLOCK) 27,4 TONS MASS OF ANVIL BLOCK 47,2 TONS
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-20 strokes/minadj distance between plate & slide: 200 mmslide dimensions: 1200 x 1460 mmmax mouldweight: 1600 kgwith table cushionwith moving tableis part of the production line for radiators - z02 5167 20 STROKES/MINADJ DISTANCE BETWEEN PLATE & SLIDE: 200 MMSLIDE DIMENSIONS: 1200 X 1460 MMMAX MOULDWEIGHT: 1600 KGWITH TABLE CUSHIONWITH MOVING TABLEIS PART OF THE PRODUCTION LINE FOR RADIATORS - Z02 5167
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-capacity:                           1600 ton
stroke:                             400 mm
stroke per minute:                  10
shut height:                        1120 mm
ram adjustment:                     220 mm
bed:                                1800 x 1800 mm.
ram dimension:                      1440 x 1500 mm.
bolster plate thikness:             320 mm.
main drive motor power:             125 kw
voltage:                            380 v, 50 hz.
dimension of press:                 5050 x 4620 mm.
height above floor level:           8720 mm.
mass approx.:                       155 t.

yom is approx. 1980
 CAPACITY: 1600 TON STROKE: 400 MM STROKE PER MINUTE: 10 SHUT HEIGHT: 1120 MM RAM ADJUSTMENT: 220 MM BED: 1800 X 1800 MM. RAM DIMENSION: 1440 X 1500 MM. BOLSTER PLATE THIKNESS: 320 MM. MAIN DRIVE MOTOR POWER: 125 KW VOLTAGE: 380 V, 50 HZ. DIMENSION OF PRESS: 5050 X 4620 MM. HEIGHT ABOVE FLOOR LEVEL: 8720 MM. MASS APPROX.: 155 T. YOM IS APPROX. 1980
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-capacity:                                     1000 ton
ram stroke:                                   500 mm
ram stroke per min.:                          20
shuth height:                                 680 mm.
bed to ram ajastuble stroke:                  200 mm.    
bed:                                          1250 x 1250 mm
ram:                                          1250 x 1250 mm
window in bed:                                800 x 800 mm
windows in uprights:                          1280 x 1040 (w x h ), mm
ejector in ram:     
-	capacity:                             200 kn
-	stroke:                               80 mm
max. weight of die by ram:                    1400 kg
max. weight of die set:                       4700 kg
air pressure:                                 0,5-0,7 mpa 
main motor:                                   75 kw
floor space:                                  4310x3820 mm.
height above floor level:                     6980 mm.
weight of press:                              approx. 79500 kg
 CAPACITY: 1000 TON RAM STROKE: 500 MM RAM STROKE PER MIN.: 20 SHUTH HEIGHT: 680 MM. BED TO RAM AJASTUBLE STROKE: 200 MM. BED: 1250 X 1250 MM RAM: 1250 X 1250 MM WINDOW IN BED: 800 X 800 MM WINDOWS IN UPRIGHTS: 1280 X 1040 (W X H ), MM EJECTOR IN RAM: - CAPACITY: 200 KN - STROKE: 80 MM MAX. WEIGHT OF DIE BY RAM: 1400 KG MAX. WEIGHT OF DIE SET: 4700 KG AIR PRESSURE: 0,5-0,7 MPA MAIN MOTOR: 75 KW FLOOR SPACE: 4310X3820 MM. HEIGHT ABOVE FLOOR LEVEL: 6980 MM. WEIGHT OF PRESS: APPROX. 79500 KG
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-capacity:                         400 ton
stroke:                           400 mm
stroke per min. continuous :      25
shut height:                      630 mm
distance adjustment between 
ram (bottom position)and bed:     160 mm
ram:                              800 x 800 mm.
bed:                              1000 x 1000 mm.
window in bed:                    630 x 630 mm.
thickness stamping plate:         160 mm.
air pressure:                     5-7 mpa
all motors power:                 40 kw
voltage:                          380 v, 50 hz.
dimension of press:               3410 x 3140 mm.
height above floor level:         5940 mm.
mass approx.:                     37 t.

new approx. 1990 CAPACITY: 400 TON STROKE: 400 MM STROKE PER MIN. CONTINUOUS : 25 SHUT HEIGHT: 630 MM DISTANCE ADJUSTMENT BETWEEN RAM (BOTTOM POSITION)AND BED: 160 MM RAM: 800 X 800 MM. BED: 1000 X 1000 MM. WINDOW IN BED: 630 X 630 MM. THICKNESS STAMPING PLATE: 160 MM. AIR PRESSURE: 5-7 MPA ALL MOTORS POWER: 40 KW VOLTAGE: 380 V, 50 HZ. DIMENSION OF PRESS: 3410 X 3140 MM. HEIGHT ABOVE FLOOR LEVEL: 5940 MM. MASS APPROX.: 37 T. NEW APPROX. 1990
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land- nominal effort: 400 tons
 slide stroke: 250 mm
 number of strokes: 25/1 min
 distance between bolster plate and slide: 510 mm
 shut height: 670 mm
 regulation of slide: 160 mm
 slide surface: 800x800 mm
 table size: 1000x1000 mm
 main motor: 40 kw
 dimmension:
 -lenght: 3470 mm
 -width: 3140 mm
 -height: 5940 mm
 press weight: 32 tons  NOMINAL EFFORT: 400 TONS SLIDE STROKE: 250 MM NUMBER OF STROKES: 25/1 MIN DISTANCE BETWEEN BOLSTER PLATE AND SLIDE: 510 MM SHUT HEIGHT: 670 MM REGULATION OF SLIDE: 160 MM SLIDE SURFACE: 800X800 MM TABLE SIZE: 1000X1000 MM MAIN MOTOR: 40 KW DIMMENSION: -LENGHT: 3470 MM -WIDTH: 3140 MM -HEIGHT: 5940 MM PRESS WEIGHT: 32 TONS
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Precio: 56.000 €
Ubicación: Land-capacity, ton 630
stroke path till its position where it
develops nominal capacity, mm 16
slider stroke, mm 320
slider strokes, spm 20
max. distance between table and slider, mm
800
distance adjustment between table and slider,
mm 180
table size, mm 1250 x 1250
slider dimensions, mm 1000 x 1000
opening in the table, mm 800 x 800
thickness of bolster, mm 180
cushion stroke, mm 130
main motor power, kw 58
machine dimensions, mm 3280 x 3470 x 6190
machine weight, kg 55500 CAPACITY, TON 630 STROKE PATH TILL ITS POSITION WHERE IT DEVELOPS NOMINAL CAPACITY, MM 16 SLIDER STROKE, MM 320 SLIDER STROKES, SPM 20 MAX. DISTANCE BETWEEN TABLE AND SLIDER, MM 800 DISTANCE ADJUSTMENT BETWEEN TABLE AND SLIDER, MM 180 TABLE SIZE, MM 1250 X 1250 SLIDER DIMENSIONS, MM 1000 X 1000 OPENING IN THE TABLE, MM 800 X 800 THICKNESS OF BOLSTER, MM 180 CUSHION STROKE, MM 130 MAIN MOTOR POWER, KW 58 MACHINE DIMENSIONS, MM 3280 X 3470 X 6190 MACHINE WEIGHT, KG 55500
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-capacity, ton 630
stroke path till its position where it
develops nominal capacity, mm 16
slider stroke, mm 320
slider strokes, spm 20
max. distance between table and slider, mm
800
distance adjustment between table and slider,
mm 180
table size, mm 1250 x 1250
slider dimensions, mm 1000 x 1000
opening in the table, mm 800 x 800
thickness of bolster, mm 180
cushion stroke, mm 130
main motor power, kw 58
machine dimensions, mm 3280 x 3470 x 6190
machine weight, kg 55500   CAPACITY, TON 630 STROKE PATH TILL ITS POSITION WHERE IT DEVELOPS NOMINAL CAPACITY, MM 16 SLIDER STROKE, MM 320 SLIDER STROKES, SPM 20 MAX. DISTANCE BETWEEN TABLE AND SLIDER, MM 800 DISTANCE ADJUSTMENT BETWEEN TABLE AND SLIDER, MM 180 TABLE SIZE, MM 1250 X 1250 SLIDER DIMENSIONS, MM 1000 X 1000 OPENING IN THE TABLE, MM 800 X 800 THICKNESS OF BOLSTER, MM 180 CUSHION STROKE, MM 130 MAIN MOTOR POWER, KW 58 MACHINE DIMENSIONS, MM 3280 X 3470 X 6190 MACHINE WEIGHT, KG 55500
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Precio: 26.000 €
Ubicación: Land-nominal force, kn 1600
slider stroke, mm 250
the distance between the table and the slider, mm 610
the distance between the table and the slider, mm 610
engine power of the main movement of kw 22
table size width / length mm 750/2000
machine dimensions long width height (mm) 2940_2990_4750
weight kg 26160   NOMINAL FORCE, KN 1600 SLIDER STROKE, MM 250 THE DISTANCE BETWEEN THE TABLE AND THE SLIDER, MM 610 THE DISTANCE BETWEEN THE TABLE AND THE SLIDER, MM 610 ENGINE POWER OF THE MAIN MOVEMENT OF KW 22 TABLE SIZE WIDTH / LENGTH MM 750/2000 MACHINE DIMENSIONS LONG WIDTH HEIGHT (MM) 2940_2990_4750 WEIGHT KG 26160
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-nominal capacity, t                   800
ram stroke, mm                        320
number of ram strokes  min.–1         20
bed-to bolster plate adjustment ,mm   320
shut height, mm                       900
size of bed, mm                       2500x1600
size of ram, mm                       1400
zthickness of stamping plate, mm:     250 
capacity of upper ejector, t:         40
all capacity of all pneum.cushions,t: 80
works stroke of all cushiones, t.:    100
press dimensions,mm:
- from left to right, mm:             4600 
- from front to back, mm:             3280
height of press above floor level, mm:6325
main drive motor power, kw            76,8
weight, approx., t.                   86  NOMINAL CAPACITY, T 800 RAM STROKE, MM 320 NUMBER OF RAM STROKES MIN.–1 20 BED-TO BOLSTER PLATE ADJUSTMENT ,MM 320 SHUT HEIGHT, MM 900 SIZE OF BED, MM 2500X1600 SIZE OF RAM, MM 1400 ZTHICKNESS OF STAMPING PLATE, MM: 250 CAPACITY OF UPPER EJECTOR, T: 40 ALL CAPACITY OF ALL PNEUM.CUSHIONS,T: 80 WORKS STROKE OF ALL CUSHIONES, T.: 100 PRESS DIMENSIONS,MM: - FROM LEFT TO RIGHT, MM: 4600 - FROM FRONT TO BACK, MM: 3280 HEIGHT OF PRESS ABOVE FLOOR LEVEL, MM:6325 MAIN DRIVE MOTOR POWER, KW 76,8 WEIGHT, APPROX., T. 86
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-capacity:                             315 ton
stroke:                               400 mm
stroke per min. continuous :          16
shut height:                          710 mm
distance adjustment between 
ram (bottom position)and bed:         140 mm
bed:                                  1000 x 1000 mm.
thickness stamping plate:             140
air pressure:                         5-7 mpa
all motors power:                     40 kw
dimension of press:                   3100 x 3140 mm.
height above floor level:             5770 mm.
mass approx.:                         approx. 34 t.

     -     subject to prior sale – 
     -     with the right for shorthand, technical mistakes and typos, not-binding – 
 CAPACITY: 315 TON STROKE: 400 MM STROKE PER MIN. CONTINUOUS : 16 SHUT HEIGHT: 710 MM DISTANCE ADJUSTMENT BETWEEN RAM (BOTTOM POSITION)AND BED: 140 MM BED: 1000 X 1000 MM. THICKNESS STAMPING PLATE: 140 AIR PRESSURE: 5-7 MPA ALL MOTORS POWER: 40 KW DIMENSION OF PRESS: 3100 X 3140 MM. HEIGHT ABOVE FLOOR LEVEL: 5770 MM. MASS APPROX.: APPROX. 34 T. - SUBJECT TO PRIOR SALE – - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING –
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-capacity:                 1000 ton
ram stroke:               250 mm
ram stroke per min.:      80
shut height:              560 mm
ram ajustment:            20 mm
side windows in frame:    560 x 560 mm
bed:                      770 x 990 mm
ram:                      770 x 770 mm.
overall width of machine  4100 mm
overall depth of machine  2850 mm
overall height            5800 mm
overall weight (net)      67 640 kg

- subject to prior sale -  
- with the right for shorthand, technical mistakes and typos, not-binding -

we remain at your disposal for any question you may have.
  CAPACITY: 1000 TON RAM STROKE: 250 MM RAM STROKE PER MIN.: 80 SHUT HEIGHT: 560 MM RAM AJUSTMENT: 20 MM SIDE WINDOWS IN FRAME: 560 X 560 MM BED: 770 X 990 MM RAM: 770 X 770 MM. OVERALL WIDTH OF MACHINE 4100 MM OVERALL DEPTH OF MACHINE 2850 MM OVERALL HEIGHT 5800 MM OVERALL WEIGHT (NET) 67 640 KG - SUBJECT TO PRIOR SALE - - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING - WE REMAIN AT YOUR DISPOSAL FOR ANY QUESTION YOU MAY HAVE.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-capacity:                  1600 ton
ram stroke:                300 mm
ram stroke per min.:       75
shut height:               660 mm.
bed:                       940 x 1200 mm
ram:                       860 x 910 mm
height above floor level:  5570 mm.
weight:                    approx. 120 ton

 CAPACITY: 1600 TON RAM STROKE: 300 MM RAM STROKE PER MIN.: 75 SHUT HEIGHT: 660 MM. BED: 940 X 1200 MM RAM: 860 X 910 MM HEIGHT ABOVE FLOOR LEVEL: 5570 MM. WEIGHT: APPROX. 120 TON
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-4-crank closed simple-action

nominal effort kn 5000
slide stroke, mm 630
the distance between table and slider, mm 1400
main drive power kw 55
table size width / length 1700/3200 mm
machine dimensions length width height (mm) 4850_3300_7700
weight kg 127000  4-CRANK CLOSED SIMPLE-ACTION NOMINAL EFFORT KN 5000 SLIDE STROKE, MM 630 THE DISTANCE BETWEEN TABLE AND SLIDER, MM 1400 MAIN DRIVE POWER KW 55 TABLE SIZE WIDTH / LENGTH 1700/3200 MM MACHINE DIMENSIONS LENGTH WIDTH HEIGHT (MM) 4850_3300_7700 WEIGHT KG 127000
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-nominal force:      630 t
stroke:             320 mm
number of strokes:  20/min
shut height:        800 mm
adjustment:         180 mm
bed:                1250 x 1250 mm
main motor:         55 kw
weight:             approx. 56 tons

- subject to prior sale -  
- with the right for shorthand, technical mistakes and typos, not-binding -

we remain at your disposal for any question you may have. NOMINAL FORCE: 630 T STROKE: 320 MM NUMBER OF STROKES: 20/MIN SHUT HEIGHT: 800 MM ADJUSTMENT: 180 MM BED: 1250 X 1250 MM MAIN MOTOR: 55 KW WEIGHT: APPROX. 56 TONS - SUBJECT TO PRIOR SALE - - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING - WE REMAIN AT YOUR DISPOSAL FOR ANY QUESTION YOU MAY HAVE.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-nominal force:           630 t
stroke:                  320 mm
number of strokes:       20/min
shut height:             800 mm
adjustment:              180 mm
bed:                     1250 x 1250 mm
main motor:              55 kw
weight:                  approx. 56 tons

     - subject to prior sale -  
- with the right for shorthand, technical mistakes and typos, not-binding - NOMINAL FORCE: 630 T STROKE: 320 MM NUMBER OF STROKES: 20/MIN SHUT HEIGHT: 800 MM ADJUSTMENT: 180 MM BED: 1250 X 1250 MM MAIN MOTOR: 55 KW WEIGHT: APPROX. 56 TONS - SUBJECT TO PRIOR SALE - - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING -
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-technical specification:
capacity: 1600 ton
slider stroke length: 300 mm 
slider strokes per minute: 75
adjustment: 10 mm 
shut height: 660 mm
length of a rod: 920 mm
bed overall dimensions: mm 940 x 1200
slider overall dimensions: mm 860 x 910
the size of lateral windows:
- height: 560 mm
- width: 600 mm
main motor: 110 kw
press overall dimensions:
- length: 5060 mm
- width: 3940 mm
- height above floor level: 5125 mm
press weight: 120 ton TECHNICAL SPECIFICATION: CAPACITY: 1600 TON SLIDER STROKE LENGTH: 300 MM SLIDER STROKES PER MINUTE: 75 ADJUSTMENT: 10 MM SHUT HEIGHT: 660 MM LENGTH OF A ROD: 920 MM BED OVERALL DIMENSIONS: MM 940 X 1200 SLIDER OVERALL DIMENSIONS: MM 860 X 910 THE SIZE OF LATERAL WINDOWS: - HEIGHT: 560 MM - WIDTH: 600 MM MAIN MOTOR: 110 KW PRESS OVERALL DIMENSIONS: - LENGTH: 5060 MM - WIDTH: 3940 MM - HEIGHT ABOVE FLOOR LEVEL: 5125 MM PRESS WEIGHT: 120 TON
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-nominal force:                 630 t
stroke:                        420 mm
number of strokes:             20/min
shut height:                   900 mm
adjustment:                    180 mm
bed:                           1250 x 1250 mm
ram:                           1000 x 1000 mm.
window in bed:                 800 x 800 mm.
thikness of stamping plate:    180 mm.
bed`s height above floor level:400 mm.
press dimensions: 
-from left to right:           3280 mm.
-from front to back:           3470 mm.
-press height above floor level:6150 mm.
weight:                        approx. 51 tons
  NOMINAL FORCE: 630 T STROKE: 420 MM NUMBER OF STROKES: 20/MIN SHUT HEIGHT: 900 MM ADJUSTMENT: 180 MM BED: 1250 X 1250 MM RAM: 1000 X 1000 MM. WINDOW IN BED: 800 X 800 MM. THIKNESS OF STAMPING PLATE: 180 MM. BED`S HEIGHT ABOVE FLOOR LEVEL:400 MM. PRESS DIMENSIONS: -FROM LEFT TO RIGHT: 3280 MM. -FROM FRONT TO BACK: 3470 MM. -PRESS HEIGHT ABOVE FLOOR LEVEL:6150 MM. WEIGHT: APPROX. 51 TONS
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Precio: 110.000 €
Ubicación: Land-technological view of stamping
stamping draft with torsion

kn nominal force. 10000
internal effort slider kn.6000
effort outer slider kn. 4000
stroke frequency min. 90
mm stroke of the ram. 250
mm adjustment. 10
distance
internal slider mm.435
external slider mm.655
upper ejector
stroke mm.15
effort kn.20
lower ejector
stroke mm.40                       
effort kn.180
table 1000x1000
dimensions, external slide
from left to right 900
front to back 800
diameter of the inner slider 290
power kw main drive. 75
dimensions
from left: 5240
front to back 3000
height above floor level 5950
weight 95 000 kg  TECHNOLOGICAL VIEW OF STAMPING STAMPING DRAFT WITH TORSION KN NOMINAL FORCE. 10000 INTERNAL EFFORT SLIDER KN.6000 EFFORT OUTER SLIDER KN. 4000 STROKE FREQUENCY MIN. 90 MM STROKE OF THE RAM. 250 MM ADJUSTMENT. 10 DISTANCE INTERNAL SLIDER MM.435 EXTERNAL SLIDER MM.655 UPPER EJECTOR STROKE MM.15 EFFORT KN.20 LOWER EJECTOR STROKE MM.40 EFFORT KN.180 TABLE 1000X1000 DIMENSIONS, EXTERNAL SLIDE FROM LEFT TO RIGHT 900 FRONT TO BACK 800 DIAMETER OF THE INNER SLIDER 290 POWER KW MAIN DRIVE. 75 DIMENSIONS FROM LEFT: 5240 FRONT TO BACK 3000 HEIGHT ABOVE FLOOR LEVEL 5950 WEIGHT 95 000 KG
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-nominal force       kn             25 000
ram stroke       mm                350
number of strokes /min.            60
shut height       mm               890
ram ajustment  mm                  10
ram dimensions mm                  1070 x 1120
bad dimensions mm                  1200 x 1400
slide ejector
ejector capacity kn                63
stroke  mm                         50
bed ejector
ejector capacity kn                10
stroke  mm                         50
distance clear between uprights, mm 1320
main drive motor kw                132

dimensions of press
– lxb   - lxw   mm                 5310 x 4680
height above floor level   mm      6400
weight of press t, approx.         198



the delivery includes the following components and parts of the press:
- frame top assy with caps promval - 1
- table assembly-1
the lower arm of the ejector - 1
- tie rods with nuts-4
- hydrogene – 4
- eccentric shaft-1
- bearing housing (axle) assembly-1
- wheel with toothed crown-1
- clutch cover assembly-1
- brake without disc-1
- slide (without connecting rod and upper ejector) - 1
- connecting rod cover-1
- slide trim (cylinder, piston, cover) - 1
- drive shaft assembly (flywheel, gear, bearing) - 1
- engine platform assembly with traction-1
- receiver-2
- upper guide – 2
- bottom guide-2
- pipe-2
- clutch guardrail-2
- control panel-1
- lubrication station-1
- resistance cabinet-1
- electric cabinet-1

 -     subject to prior sale – 
 -     with the right for shorthand, technical mistakes and typos, not-binding –  NOMINAL FORCE KN 25 000 RAM STROKE MM 350 NUMBER OF STROKES /MIN. 60 SHUT HEIGHT MM 890 RAM AJUSTMENT MM 10 RAM DIMENSIONS MM 1070 X 1120 BAD DIMENSIONS MM 1200 X 1400 SLIDE EJECTOR EJECTOR CAPACITY KN 63 STROKE MM 50 BED EJECTOR EJECTOR CAPACITY KN 10 STROKE MM 50 DISTANCE CLEAR BETWEEN UPRIGHTS, MM 1320 MAIN DRIVE MOTOR KW 132 DIMENSIONS OF PRESS – LXB - LXW MM 5310 X 4680 HEIGHT ABOVE FLOOR LEVEL MM 6400 WEIGHT OF PRESS T, APPROX. 198 THE DELIVERY INCLUDES THE FOLLOWING COMPONENTS AND PARTS OF THE PRESS: - FRAME TOP ASSY WITH CAPS PROMVAL - 1 - TABLE ASSEMBLY-1 THE LOWER ARM OF THE EJECTOR - 1 - TIE RODS WITH NUTS-4 - HYDROGENE – 4 - ECCENTRIC SHAFT-1 - BEARING HOUSING (AXLE) ASSEMBLY-1 - WHEEL WITH TOOTHED CROWN-1 - CLUTCH COVER ASSEMBLY-1 - BRAKE WITHOUT DISC-1 - SLIDE (WITHOUT CONNECTING ROD AND UPPER EJECTOR) - 1 - CONNECTING ROD COVER-1 - SLIDE TRIM (CYLINDER, PISTON, COVER) - 1 - DRIVE SHAFT ASSEMBLY (FLYWHEEL, GEAR, BEARING) - 1 - ENGINE PLATFORM ASSEMBLY WITH TRACTION-1 - RECEIVER-2 - UPPER GUIDE – 2 - BOTTOM GUIDE-2 - PIPE-2 - CLUTCH GUARDRAIL-2 - CONTROL PANEL-1 - LUBRICATION STATION-1 - RESISTANCE CABINET-1 - ELECTRIC CABINET-1 - SUBJECT TO PRIOR SALE – - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING –
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-capacity:                     400 ton
stroke:                       360 mm
stroke per min. continuous :  25
stroke per min. single.:      18
shut height:                  880 mm
distance adjustment between 
ram (bottom position)and bed: 160 mm
ram:                          800 x 800 mm.
bed:                          1000 x 1000 mm.
window in bed:                630 x 630 mm.
thickness stamping plate:     140 mm.
bed height above floor level: 460 mm.
hydr.pneum.kushion in bed:
-	stroke, max.:         120 mm.
-	pressing capacity:    630 kn
-	ejector capacity:     70 kn 
air pressure:                 5-7 mpa
all motors power:             40 kw
voltage:                      380 v, 50 hz.
dimension of press:           3100 x 3140 mm.
height above floor level:     5980 mm.
mass approx.:                 37 t.
 CAPACITY: 400 TON STROKE: 360 MM STROKE PER MIN. CONTINUOUS : 25 STROKE PER MIN. SINGLE.: 18 SHUT HEIGHT: 880 MM DISTANCE ADJUSTMENT BETWEEN RAM (BOTTOM POSITION)AND BED: 160 MM RAM: 800 X 800 MM. BED: 1000 X 1000 MM. WINDOW IN BED: 630 X 630 MM. THICKNESS STAMPING PLATE: 140 MM. BED HEIGHT ABOVE FLOOR LEVEL: 460 MM. HYDR.PNEUM.KUSHION IN BED: - STROKE, MAX.: 120 MM. - PRESSING CAPACITY: 630 KN - EJECTOR CAPACITY: 70 KN AIR PRESSURE: 5-7 MPA ALL MOTORS POWER: 40 KW VOLTAGE: 380 V, 50 HZ. DIMENSION OF PRESS: 3100 X 3140 MM. HEIGHT ABOVE FLOOR LEVEL: 5980 MM. MASS APPROX.: 37 T.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-trimming press voronezh k2538 630t

condition: good, working, full complete

technical specification:
maximum force: 630 tons
slider stroke length: 320 mm
number of courses of a slider per minute: 20
max. distance between bolster and ram: 800 mm
adjustment: 180 mm
table size: 1250x1250 mm
slider overall dimensions: 1200x1000 mm
aperture in a table: 800x800 mm
window dimensions in cheeks: 750x400 mm
hydro-pneumatic pillow: available
press overall dimensions: 3659x3680x6370 mm
press weight: 55500 kg 
 TRIMMING PRESS VORONEZH K2538 630T CONDITION: GOOD, WORKING, FULL COMPLETE TECHNICAL SPECIFICATION: MAXIMUM FORCE: 630 TONS SLIDER STROKE LENGTH: 320 MM NUMBER OF COURSES OF A SLIDER PER MINUTE: 20 MAX. DISTANCE BETWEEN BOLSTER AND RAM: 800 MM ADJUSTMENT: 180 MM TABLE SIZE: 1250X1250 MM SLIDER OVERALL DIMENSIONS: 1200X1000 MM APERTURE IN A TABLE: 800X800 MM WINDOW DIMENSIONS IN CHEEKS: 750X400 MM HYDRO-PNEUMATIC PILLOW: AVAILABLE PRESS OVERALL DIMENSIONS: 3659X3680X6370 MM PRESS WEIGHT: 55500 KG
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-capacity:                         400 ton
stroke:                           400 mm
stroke per min. continuous :      25
shut height:                      630 mm
distance adjustment between 
ram (bottom position)and bed:     160 mm
ram:                              800 x 800 mm.
bed:                              1000 x 1000 mm.
window in bed:                    630 x 630 mm.
thickness stamping plate:         160 mm.
air pressure:                     5-7 mpa
all motors power:                 40 kw
voltage:                          380 v, 50 hz.
dimension of press:               3410 x 3140 mm.
height above floor level:         5940 mm.
mass approx.:                     37 t. CAPACITY: 400 TON STROKE: 400 MM STROKE PER MIN. CONTINUOUS : 25 SHUT HEIGHT: 630 MM DISTANCE ADJUSTMENT BETWEEN RAM (BOTTOM POSITION)AND BED: 160 MM RAM: 800 X 800 MM. BED: 1000 X 1000 MM. WINDOW IN BED: 630 X 630 MM. THICKNESS STAMPING PLATE: 160 MM. AIR PRESSURE: 5-7 MPA ALL MOTORS POWER: 40 KW VOLTAGE: 380 V, 50 HZ. DIMENSION OF PRESS: 3410 X 3140 MM. HEIGHT ABOVE FLOOR LEVEL: 5940 MM. MASS APPROX.: 37 T.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-nominal mass of drop parts kg                  2000 
impact energy                                  50 kj 
max. no. of blows/min.                         70 
ram stroke                                     1200 mm 
distance clear between guides                  600 mm 
ram front-to-back dimensions                   670 mm 
die holder front-to-back dimensions            900 mm 
min. die holder to ram distance                260 mm 
steam/air pressure                             0.7-0.9 mpa 
dimensions                                     3650x1660x5310 mm 
mass (less anvil block)                        18 tons 
mass of anvil block                            40 tons 
   NOMINAL MASS OF DROP PARTS KG 2000 IMPACT ENERGY 50 KJ MAX. NO. OF BLOWS/MIN. 70 RAM STROKE 1200 MM DISTANCE CLEAR BETWEEN GUIDES 600 MM RAM FRONT-TO-BACK DIMENSIONS 670 MM DIE HOLDER FRONT-TO-BACK DIMENSIONS 900 MM MIN. DIE HOLDER TO RAM DISTANCE 260 MM STEAM/AIR PRESSURE 0.7-0.9 MPA DIMENSIONS 3650X1660X5310 MM MASS (LESS ANVIL BLOCK) 18 TONS MASS OF ANVIL BLOCK 40 TONS
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Precio: 70.000 €
Ubicación: Land-capacity , ton:	800	
stroke, mm:	320	
strokes/min:	20	
shut height, mm:	900	
bed to ram adjustment stroke, mm:	320	
bed dimensions, mm:	2500x1600	
main drive motor power, kw:	75	
overall dimensions, mm:	4220x3500x8356	
weight, ton:	96,6  CAPACITY , TON: 800 STROKE, MM: 320 STROKES/MIN: 20 SHUT HEIGHT, MM: 900 BED TO RAM ADJUSTMENT STROKE, MM: 320 BED DIMENSIONS, MM: 2500X1600 MAIN DRIVE MOTOR POWER, KW: 75 OVERALL DIMENSIONS, MM: 4220X3500X8356 WEIGHT, TON: 96,6
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-condition: good, working, full complete. 

technical specification:
maximum force, ton-force: 400
slider stroke length, mm: 400
slider strokes per minute: 25
shut height, mm: 630
adjustment, mm:160
table overall dimensions, mm:
- from front to rear: 1000
- from left to right: 1000
slider overall dimensions, mm: 800x800
main electric motor power, kw: 43,3
press overall dimensions, mm:
- length: 3410
- width: 3140
- height: 5940
press weight, kg: 32700  CONDITION: GOOD, WORKING, FULL COMPLETE. TECHNICAL SPECIFICATION: MAXIMUM FORCE, TON-FORCE: 400 SLIDER STROKE LENGTH, MM: 400 SLIDER STROKES PER MINUTE: 25 SHUT HEIGHT, MM: 630 ADJUSTMENT, MM:160 TABLE OVERALL DIMENSIONS, MM: - FROM FRONT TO REAR: 1000 - FROM LEFT TO RIGHT: 1000 SLIDER OVERALL DIMENSIONS, MM: 800X800 MAIN ELECTRIC MOTOR POWER, KW: 43,3 PRESS OVERALL DIMENSIONS, MM: - LENGTH: 3410 - WIDTH: 3140 - HEIGHT: 5940 PRESS WEIGHT, KG: 32700
Vendedor: Kipling Holding
Año de construcción: usado
Precio: 100.000 €
Ubicación: Land-(side-front moving table)
nominal force: 1000 ton
slide stroke: 400 mm
continuous slide strokes per 1 min: 20 
single slide strokes per 1 min: 16 
shut height: 1060 mm
slide adjustment: 320 mm
table dimensions: 3150x1800 mm 
slide dim., front-back: 1700 mm
window h 1500 x  w 1900 mm
hydro pneumatic cushion in table
clamping force at p = 0.42 mpa
(p = 4.2 kg / cm2), kn 2000
ejection force p = 0.45 mpa
(p = 4.5 kg / cm2), kn 200
main-drive electric motor power: 132 kw
dimensions: 5150x4700x11400
h floor7830 mm
weight:193 ton  (SIDE-FRONT MOVING TABLE) NOMINAL FORCE: 1000 TON SLIDE STROKE: 400 MM CONTINUOUS SLIDE STROKES PER 1 MIN: 20 SINGLE SLIDE STROKES PER 1 MIN: 16 SHUT HEIGHT: 1060 MM SLIDE ADJUSTMENT: 320 MM TABLE DIMENSIONS: 3150X1800 MM SLIDE DIM., FRONT-BACK: 1700 MM WINDOW H 1500 X W 1900 MM HYDRO PNEUMATIC CUSHION IN TABLE CLAMPING FORCE AT P = 0.42 MPA (P = 4.2 KG / CM2), KN 2000 EJECTION FORCE P = 0.45 MPA (P = 4.5 KG / CM2), KN 200 MAIN-DRIVE ELECTRIC MOTOR POWER: 132 KW DIMENSIONS: 5150X4700X11400 H FLOOR7830 MM WEIGHT:193 TON
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-technical specification: 
capacity, ton 1000 
ram stroke, mm 250 
shut height, mm 560 
number of strokes per minute 90 
table dimensions, mm 990 x 770 
ram dimensions, mm 720 x 720 
opening in the column, mm 1250 x 560 
table-to-ram adjustment, mm 20 
upper knockout stroke, mm 40 
lower knockout stroke, mm 40 
lower knockout capacity, ton 5 
main motor power, kw 55 
voltage, v 380 
machine dimensions, mm 4350 x 3500 x 5145 
press weight, kg 65100    TECHNICAL SPECIFICATION: CAPACITY, TON 1000 RAM STROKE, MM 250 SHUT HEIGHT, MM 560 NUMBER OF STROKES PER MINUTE 90 TABLE DIMENSIONS, MM 990 X 770 RAM DIMENSIONS, MM 720 X 720 OPENING IN THE COLUMN, MM 1250 X 560 TABLE-TO-RAM ADJUSTMENT, MM 20 UPPER KNOCKOUT STROKE, MM 40 LOWER KNOCKOUT STROKE, MM 40 LOWER KNOCKOUT CAPACITY, TON 5 MAIN MOTOR POWER, KW 55 VOLTAGE, V 380 MACHINE DIMENSIONS, MM 4350 X 3500 X 5145 PRESS WEIGHT, KG 65100
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-technical specification:
maximum force: 400 ton
ram stroke : 150 mm 
number of strokes per minute : 32
shut height: 600 mm
table dimensions : 1000 x 1740 mm 
dimensions : 
length 2520 mm
width 1690 mm
height 4400 mm
weight 33100 kg   TECHNICAL SPECIFICATION: MAXIMUM FORCE: 400 TON RAM STROKE : 150 MM NUMBER OF STROKES PER MINUTE : 32 SHUT HEIGHT: 600 MM TABLE DIMENSIONS : 1000 X 1740 MM DIMENSIONS : LENGTH 2520 MM WIDTH 1690 MM HEIGHT 4400 MM WEIGHT 33100 KG
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-nominal force           kn                       25000
ram stroke              mm                       600
number of strokes     /min.                      11
shut height             mm                       1350
bolster plate-to-ram
adjustment stroke       mm                       350
bed                     mm                       4500 x 2000
ram                     mm                       3750 x 1800
thickness of table plate  mm                     300
stroke of pneumatic
cushion / table                 mm               270
number of cushions/table                         3
total ejector of ram’s  force   kn               400
stroke of ejector in ram        mm               150
main drive motor                kw               200
motor of ram adjustment         kw               17
total power of all motors       kw               224
opening frame                   mm               1050 x 900
dimensions of press
- lxw                           mm               5670 x 8700
- total height                  mm               12200
weight of press                 t, approx.       500 NOMINAL FORCE KN 25000 RAM STROKE MM 600 NUMBER OF STROKES /MIN. 11 SHUT HEIGHT MM 1350 BOLSTER PLATE-TO-RAM ADJUSTMENT STROKE MM 350 BED MM 4500 X 2000 RAM MM 3750 X 1800 THICKNESS OF TABLE PLATE MM 300 STROKE OF PNEUMATIC CUSHION / TABLE MM 270 NUMBER OF CUSHIONS/TABLE 3 TOTAL EJECTOR OF RAM’S FORCE KN 400 STROKE OF EJECTOR IN RAM MM 150 MAIN DRIVE MOTOR KW 200 MOTOR OF RAM ADJUSTMENT KW 17 TOTAL POWER OF ALL MOTORS KW 224 OPENING FRAME MM 1050 X 900 DIMENSIONS OF PRESS - LXW MM 5670 X 8700 - TOTAL HEIGHT MM 12200 WEIGHT OF PRESS T, APPROX. 500
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-nominal distance between axis, 500 mm 
nominal force, kn 1600 
size of tool roll, 360 mm diameter, length 400 mm 
the frequency of rotation of roll, min-1 28
adjustment distance between axis, 6 mm 
diameter of initial blank: not more than 75 mm 
power of main drive motor, 55 kw 
dimensions 3040x2480 mm
height over floor level 2750 mm
weight 17700 kg NOMINAL DISTANCE BETWEEN AXIS, 500 MM NOMINAL FORCE, KN 1600 SIZE OF TOOL ROLL, 360 MM DIAMETER, LENGTH 400 MM THE FREQUENCY OF ROTATION OF ROLL, MIN-1 28 ADJUSTMENT DISTANCE BETWEEN AXIS, 6 MM DIAMETER OF INITIAL BLANK: NOT MORE THAN 75 MM POWER OF MAIN DRIVE MOTOR, 55 KW DIMENSIONS 3040X2480 MM HEIGHT OVER FLOOR LEVEL 2750 MM WEIGHT 17700 KG
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-hot forging press voronezh model k8544 2500t

condition: good, full complete, not dismantled, not under power. 

for additional price we can offer following brand new spares :
main gear, clutch , connecting rod, clutch disk (internal teeth, friction pads)

tech data:
maximum force ton-force, 2500
slider stroke length mm, 350
slider stroke length at maximum force mm, 0,1
unattainable-course mm, 10
number of courses of a slider per minute, 60
length of a rod mm, 1100
the closed height - the least distance between a table and a slider in its bottom position (at the top position of adjustment) mm, 890
table overall dimensions mm, 1400 1200
table height above floor level mm, 450
slider overall dimensions mm, 1120x1070
the size of lateral windows: mm 
- height 890
- width 720
distance between posts (in light) mm, 1320
ejector in a slider (top): type-mechanical with a drive from a rod 
- the greatest force of pushing out ton-force, 6,3
- the greatest course of pushing mm, 50
ejector of a table (bottom): type-mechanical with a pneumodrive 
- the greatest force of pushing out ton-force, 10
- the greatest course of pushing mm, 50
maximal twisting force at which should work fuse kgm, 140 000
belt drive of a drive of a slider:
type of a belt, wedge-like
section of a belt, d 
- nominal length of a belt mm, 6500
- amount of belts, 9
the greatest external diameter of a flywheel mm, 1780
number of turns a minute of a flywheel, 326
the moment of inertia of a flywheel kgm/sec, 435
weight of a flywheel kg, 5 300
power of the electric motor of slider drive: type akz-315 2-6 (980 turn/min) kw, 132
press overall dimensions mm, 
- length 5310
- width 4680
- height 6400
press weight kg, 198 000 HOT FORGING PRESS VORONEZH MODEL K8544 2500T CONDITION: GOOD, FULL COMPLETE, NOT DISMANTLED, NOT UNDER POWER. FOR ADDITIONAL PRICE WE CAN OFFER FOLLOWING BRAND NEW SPARES : MAIN GEAR, CLUTCH , CONNECTING ROD, CLUTCH DISK (INTERNAL TEETH, FRICTION PADS) TECH DATA: MAXIMUM FORCE TON-FORCE, 2500 SLIDER STROKE LENGTH MM, 350 SLIDER STROKE LENGTH AT MAXIMUM FORCE MM, 0,1 UNATTAINABLE-COURSE MM, 10 NUMBER OF COURSES OF A SLIDER PER MINUTE, 60 LENGTH OF A ROD MM, 1100 THE CLOSED HEIGHT - THE LEAST DISTANCE BETWEEN A TABLE AND A SLIDER IN ITS BOTTOM POSITION (AT THE TOP POSITION OF ADJUSTMENT) MM, 890 TABLE OVERALL DIMENSIONS MM, 1400 1200 TABLE HEIGHT ABOVE FLOOR LEVEL MM, 450 SLIDER OVERALL DIMENSIONS MM, 1120X1070 THE SIZE OF LATERAL WINDOWS: MM - HEIGHT 890 - WIDTH 720 DISTANCE BETWEEN POSTS (IN LIGHT) MM, 1320 EJECTOR IN A SLIDER (TOP): TYPE-MECHANICAL WITH A DRIVE FROM A ROD - THE GREATEST FORCE OF PUSHING OUT TON-FORCE, 6,3 - THE GREATEST COURSE OF PUSHING MM, 50 EJECTOR OF A TABLE (BOTTOM): TYPE-MECHANICAL WITH A PNEUMODRIVE - THE GREATEST FORCE OF PUSHING OUT TON-FORCE, 10 - THE GREATEST COURSE OF PUSHING MM, 50 MAXIMAL TWISTING FORCE AT WHICH SHOULD WORK FUSE KGM, 140 000 BELT DRIVE OF A DRIVE OF A SLIDER: TYPE OF A BELT, WEDGE-LIKE SECTION OF A BELT, D - NOMINAL LENGTH OF A BELT MM, 6500 - AMOUNT OF BELTS, 9 THE GREATEST EXTERNAL DIAMETER OF A FLYWHEEL MM, 1780 NUMBER OF TURNS A MINUTE OF A FLYWHEEL, 326 THE MOMENT OF INERTIA OF A FLYWHEEL KGM/SEC, 435 WEIGHT OF A FLYWHEEL KG, 5 300 POWER OF THE ELECTRIC MOTOR OF SLIDER DRIVE: TYPE AKZ-315 2-6 (980 TURN/MIN) KW, 132 PRESS OVERALL DIMENSIONS MM, - LENGTH 5310 - WIDTH 4680 - HEIGHT 6400 PRESS WEIGHT KG, 198 000
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-technical specification:
capacity - 1600 ton
slide stroke - 600 mm
number of slide strokes per min - 10 / 7
shut height - 1060 mm
table height adjustment - 220 mm
table size - 1800 x 1800 mm
holes in table -1250 x 1250 mm
ram size - 1440 x 1500 mm
die bed thickness - 320 mm
main drive - 125 kw
dimensions - 5050 x 4620 x 8890
press weight - 157.57 kg TECHNICAL SPECIFICATION: CAPACITY - 1600 TON SLIDE STROKE - 600 MM NUMBER OF SLIDE STROKES PER MIN - 10 / 7 SHUT HEIGHT - 1060 MM TABLE HEIGHT ADJUSTMENT - 220 MM TABLE SIZE - 1800 X 1800 MM HOLES IN TABLE -1250 X 1250 MM RAM SIZE - 1440 X 1500 MM DIE BED THICKNESS - 320 MM MAIN DRIVE - 125 KW DIMENSIONS - 5050 X 4620 X 8890 PRESS WEIGHT - 157.57 KG
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-trimming press voronezh k9538 630t

tech data:
maximum force ton-force 630
slider stroke length mm 400
number of courses of a slider per minute (continuous/single) 20 / 15
maximum distance between table and slider (in lower position of slider) mm 750
table overall dimensions: mm 
- from front to rear 1250
- from left to right 1250
power of a drive kw 58
total power of electric motors kw 62,1
press overall dimensions mm 
- length 3280
- width 3470
- height 6190
press weight without hydropneumatic pillow kg 49 800
press weight with a hydropneumatic pillow kg 52 650 TRIMMING PRESS VORONEZH K9538 630T TECH DATA: MAXIMUM FORCE TON-FORCE 630 SLIDER STROKE LENGTH MM 400 NUMBER OF COURSES OF A SLIDER PER MINUTE (CONTINUOUS/SINGLE) 20 / 15 MAXIMUM DISTANCE BETWEEN TABLE AND SLIDER (IN LOWER POSITION OF SLIDER) MM 750 TABLE OVERALL DIMENSIONS: MM - FROM FRONT TO REAR 1250 - FROM LEFT TO RIGHT 1250 POWER OF A DRIVE KW 58 TOTAL POWER OF ELECTRIC MOTORS KW 62,1 PRESS OVERALL DIMENSIONS MM - LENGTH 3280 - WIDTH 3470 - HEIGHT 6190 PRESS WEIGHT WITHOUT HYDROPNEUMATIC PILLOW KG 49 800 PRESS WEIGHT WITH A HYDROPNEUMATIC PILLOW KG 52 650
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-trimming press voronezh k 2542 1600 ton
can be offered with one of three possible options of retrofit:

option #1. 
condition: full retrofit of mechanical parts, pneumatic and lubrication system. 
electric and a control panel should be installed at your side.

option #2. 
additional installation of full brand new modern electric system with plc.
safety system, operator protection system, overload protection, 
main motor speed control, counter for ram press position, hmi.
system based on the delta (taiwan), mitsubishi, samcoon plc
warranty for all press systems: 6 months

option #3. 
system based on the siemens plc
warranty for all press systems: 6 months

- you are welcome to come for the inspection of retrofitting process
- new manual will be delivered along with the press, as well as checklist 
- additional service for extra price: installation and start up of the press at your workshop

technical specification:
force, ton: 1600
slider stroke length, mm: 400
number of courses per min: 10
shut height, mm: 1120
adjustment, mm: 220
slider, mm: 1440 x 1500
table, mm: 
- from left to right: 1800
- from front to rear: 1800
heigh of the table above floor level, mm: 425 
window dimensions in table: 1250 x 1250
thickness of the die plate: 320 mm
main motor: 125 kw
main motor rpm: 1455
windows in racks, mm: 1560 x 980
press overall dimensions, mm: 5050 x 4620 x 8720
weight of the machine, kg: 154 340 TRIMMING PRESS VORONEZH K 2542 1600 TON CAN BE OFFERED WITH ONE OF THREE POSSIBLE OPTIONS OF RETROFIT: OPTION #1. CONDITION: FULL RETROFIT OF MECHANICAL PARTS, PNEUMATIC AND LUBRICATION SYSTEM. ELECTRIC AND A CONTROL PANEL SHOULD BE INSTALLED AT YOUR SIDE. OPTION #2. ADDITIONAL INSTALLATION OF FULL BRAND NEW MODERN ELECTRIC SYSTEM WITH PLC. SAFETY SYSTEM, OPERATOR PROTECTION SYSTEM, OVERLOAD PROTECTION, MAIN MOTOR SPEED CONTROL, COUNTER FOR RAM PRESS POSITION, HMI. SYSTEM BASED ON THE DELTA (TAIWAN), MITSUBISHI, SAMCOON PLC WARRANTY FOR ALL PRESS SYSTEMS: 6 MONTHS OPTION #3. SYSTEM BASED ON THE SIEMENS PLC WARRANTY FOR ALL PRESS SYSTEMS: 6 MONTHS - YOU ARE WELCOME TO COME FOR THE INSPECTION OF RETROFITTING PROCESS - NEW MANUAL WILL BE DELIVERED ALONG WITH THE PRESS, AS WELL AS CHECKLIST - ADDITIONAL SERVICE FOR EXTRA PRICE: INSTALLATION AND START UP OF THE PRESS AT YOUR WORKSHOP TECHNICAL SPECIFICATION: FORCE, TON: 1600 SLIDER STROKE LENGTH, MM: 400 NUMBER OF COURSES PER MIN: 10 SHUT HEIGHT, MM: 1120 ADJUSTMENT, MM: 220 SLIDER, MM: 1440 X 1500 TABLE, MM: - FROM LEFT TO RIGHT: 1800 - FROM FRONT TO REAR: 1800 HEIGH OF THE TABLE ABOVE FLOOR LEVEL, MM: 425 WINDOW DIMENSIONS IN TABLE: 1250 X 1250 THICKNESS OF THE DIE PLATE: 320 MM MAIN MOTOR: 125 KW MAIN MOTOR RPM: 1455 WINDOWS IN RACKS, MM: 1560 X 980 PRESS OVERALL DIMENSIONS, MM: 5050 X 4620 X 8720 WEIGHT OF THE MACHINE, KG: 154 340
Vendedor: Kipling Holding
Año de construcción: usado
Ubicación: Land-capacity:                     1000 ton
ram stroke:                   400 mm
ram stroke per min.:          30
shuth height:                 1060 mm.
bed to ram ajastuble stroke:  320 mm.    
bed:                          3150 x 1800 mm
ram:                          3150 x 1700 mm
main motor:                   132 kw
height above floor level:     7830 mm.
  CAPACITY: 1000 TON RAM STROKE: 400 MM RAM STROKE PER MIN.: 30 SHUTH HEIGHT: 1060 MM. BED TO RAM AJASTUBLE STROKE: 320 MM. BED: 3150 X 1800 MM RAM: 3150 X 1700 MM MAIN MOTOR: 132 KW HEIGHT ABOVE FLOOR LEVEL: 7830 MM.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Precio: 75.000 €
Ubicación: Land-4–crank closed simple-action press

nominal force: 8000 kn
slide stroke: 800 mm
distance between table and slide: 1500 mm
main drive motor power: 100 kw
table dimensions (width x length): 2000x4200 mm
press dimensions (length x width x height): 6090x3440x8900 mm
press weight: 203000 kg 4–CRANK CLOSED SIMPLE-ACTION PRESS NOMINAL FORCE: 8000 KN SLIDE STROKE: 800 MM DISTANCE BETWEEN TABLE AND SLIDE: 1500 MM MAIN DRIVE MOTOR POWER: 100 KW TABLE DIMENSIONS (WIDTH X LENGTH): 2000X4200 MM PRESS DIMENSIONS (LENGTH X WIDTH X HEIGHT): 6090X3440X8900 MM PRESS WEIGHT: 203000 KG
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-four crank single action press
capacity, ton 500 
rated distance of slide above bottom, mm 12 
slide stroke, mm 630 
continuous run frequency, min-1 24 
max. single strokes frequency, min-1 18 
shut height, mm 1230 
shut height adjustment,mm 500 
slide dimensions, mm 1800 x 3150 
bolster plate dimensions, mm 1800 x 3150 
main drive electric motor power, kw 90 
overall dimensions, mm 5500 x 4550 x 7540 
press weight, kg 170000   FOUR CRANK SINGLE ACTION PRESS CAPACITY, TON 500 RATED DISTANCE OF SLIDE ABOVE BOTTOM, MM 12 SLIDE STROKE, MM 630 CONTINUOUS RUN FREQUENCY, MIN-1 24 MAX. SINGLE STROKES FREQUENCY, MIN-1 18 SHUT HEIGHT, MM 1230 SHUT HEIGHT ADJUSTMENT,MM 500 SLIDE DIMENSIONS, MM 1800 X 3150 BOLSTER PLATE DIMENSIONS, MM 1800 X 3150 MAIN DRIVE ELECTRIC MOTOR POWER, KW 90 OVERALL DIMENSIONS, MM 5500 X 4550 X 7540 PRESS WEIGHT, KG 170000
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-voronez k3537 double-crank single-action close-frame press 
yom 1967
force-500t 
slide stroke-250mm 
slide adjustment-250mm 
slide dimension-1250mm 
table size 2500x1400 
table size between columns:2700x1600 
strokes per minute 25 
thickness of bottom plate-220mm 
power-47kw 
dimensions:5636x3500mm 
height-6473mm 
weight:86400kg VORONEZ K3537 DOUBLE-CRANK SINGLE-ACTION CLOSE-FRAME PRESS YOM 1967 FORCE-500T SLIDE STROKE-250MM SLIDE ADJUSTMENT-250MM SLIDE DIMENSION-1250MM TABLE SIZE 2500X1400 TABLE SIZE BETWEEN COLUMNS:2700X1600 STROKES PER MINUTE 25 THICKNESS OF BOTTOM PLATE-220MM POWER-47KW DIMENSIONS:5636X3500MM HEIGHT-6473MM WEIGHT:86400KG
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-effort , 315t 
move slider, mm: 400.
frequency of move slider, 1/min: 20. 
sizes panch plate, mm: 1000x1000.
power: 34,8 (.) kw. 
sizes: 3470x3140x5940.
weight 30300kg EFFORT , 315T MOVE SLIDER, MM: 400. FREQUENCY OF MOVE SLIDER, 1/MIN: 20. SIZES PANCH PLATE, MM: 1000X1000. POWER: 34,8 (.) KW. SIZES: 3470X3140X5940. WEIGHT 30300KG
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-forging hammer, mod. m1545 + manipulator

technical specification:
falling parts weight, kg... 3150; 
impact energy, kilojoules. 80; 
max ram stroke, mm... 1250;
distance between columns, mm... 4000; 
working area height, mm... 630; 
impact frequency, min - 1. 56;
ram dimensions, mm... 600 * 340;
air consumption, m3/min. 32.6; 
hammer dimensions, mm:
     -length... 6450;
     -width... 2750;
     -height... ��.. 6300;
height above floor, mm. 5900;
anvil weight, kg. 47250;
weight of hammer with anvil, kg. 81750.
  FORGING HAMMER, MOD. M1545 + MANIPULATOR TECHNICAL SPECIFICATION: FALLING PARTS WEIGHT, KG... 3150; IMPACT ENERGY, KILOJOULES. 80; MAX RAM STROKE, MM... 1250; DISTANCE BETWEEN COLUMNS, MM... 4000; WORKING AREA HEIGHT, MM... 630; IMPACT FREQUENCY, MIN - 1. 56; RAM DIMENSIONS, MM... 600 * 340; AIR CONSUMPTION, M3/MIN. 32.6; HAMMER DIMENSIONS, MM: -LENGTH... 6450; -WIDTH... 2750; -HEIGHT... ��.. 6300; HEIGHT ABOVE FLOOR, MM. 5900; ANVIL WEIGHT, KG. 47250; WEIGHT OF HAMMER WITH ANVIL, KG. 81750.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-nominal mass of drop parts kg                  3150 
rated striking energy                          80 kj 
max. no. of blows/min.                         56 
ram stroke                                     1250 mm 
uprights distance                              710 mm 
ram dimensions from front to back              750 mm 
die holder from front to back                  1000 mm 
min. die holder to ram distance                340 mm 
steam/air pressure                             0.6-0.8 mpa 
dimensions                                     3400x1900x5450 mm 
mass (less anvil block)                        25 tons 
mass of anvil block                            63 tons 

-	subject to prior sale – 
-	prior to errors and technical amendments – 
  NOMINAL MASS OF DROP PARTS KG 3150 RATED STRIKING ENERGY 80 KJ MAX. NO. OF BLOWS/MIN. 56 RAM STROKE 1250 MM UPRIGHTS DISTANCE 710 MM RAM DIMENSIONS FROM FRONT TO BACK 750 MM DIE HOLDER FROM FRONT TO BACK 1000 MM MIN. DIE HOLDER TO RAM DISTANCE 340 MM STEAM/AIR PRESSURE 0.6-0.8 MPA DIMENSIONS 3400X1900X5450 MM MASS (LESS ANVIL BLOCK) 25 TONS MASS OF ANVIL BLOCK 63 TONS - SUBJECT TO PRIOR SALE – - PRIOR TO ERRORS AND TECHNICAL AMENDMENTS –
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Precio: 23.000 €
Ubicación: Land-rated capacity tn 315
connecting rod n° 1
slide stroke mm 400
continuous stroke per minute n° 16
die space mm 670
die space adjustment in the ram mm 140
table dimensions
l to r mm 1000
f to b mm 1000
shim over table mm 160
hole in the table mm 630 x 630
ram dimensions
l to r mm 800
f to b mm 800
uprights opening dimensions
width mm 700
height mm 550
upper knockout
power tn 20
stroke mm 60
main motor power kw 45
overall dimensions
l to r mm 2900
f to b mm 3100
height above floor level mm 5580
press total weight tn 36    RATED CAPACITY TN 315 CONNECTING ROD N° 1 SLIDE STROKE MM 400 CONTINUOUS STROKE PER MINUTE N° 16 DIE SPACE MM 670 DIE SPACE ADJUSTMENT IN THE RAM MM 140 TABLE DIMENSIONS L TO R MM 1000 F TO B MM 1000 SHIM OVER TABLE MM 160 HOLE IN THE TABLE MM 630 X 630 RAM DIMENSIONS L TO R MM 800 F TO B MM 800 UPRIGHTS OPENING DIMENSIONS WIDTH MM 700 HEIGHT MM 550 UPPER KNOCKOUT POWER TN 20 STROKE MM 60 MAIN MOTOR POWER KW 45 OVERALL DIMENSIONS L TO R MM 2900 F TO B MM 3100 HEIGHT ABOVE FLOOR LEVEL MM 5580 PRESS TOTAL WEIGHT TN 36
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-nominal weight of falling parts, kg                   1000
impact energy, kj                                     30
max. number of blows per min.:                        103
ram axis-to-frame distance (sweep), mm:               800
working zone day light, mm:                           750
die impression size, mm:                              360x140
lower die-impression-to-floor distance,mm:            750 mm.
optimum workspice dimensions:-
 square (side), mm:                                   160
- round (diametr), mm:                                180
main drive motor power, kw:                           75
overal dimensions, mm:                                4400х1780х3570
weight total, ton:                                    37 
weight of anvil block, ton:                           14 NOMINAL WEIGHT OF FALLING PARTS, KG 1000 IMPACT ENERGY, KJ 30 MAX. NUMBER OF BLOWS PER MIN.: 103 RAM AXIS-TO-FRAME DISTANCE (SWEEP), MM: 800 WORKING ZONE DAY LIGHT, MM: 750 DIE IMPRESSION SIZE, MM: 360X140 LOWER DIE-IMPRESSION-TO-FLOOR DISTANCE,MM: 750 MM. OPTIMUM WORKSPICE DIMENSIONS:- SQUARE (SIDE), MM: 160 - ROUND (DIAMETR), MM: 180 MAIN DRIVE MOTOR POWER, KW: 75 OVERAL DIMENSIONS, MM: 4400х1780х3570 WEIGHT TOTAL, TON: 37 WEIGHT OF ANVIL BLOCK, TON: 14
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-nominal mass of drop parts kg           2000 
rated striking energy                   50 kj 
max. no. of blows/min.                  50
stroke, max.:                           1200 mm.
distance clear between columns:         2300 mm.
working zone daylight:                  530 mm.
bottom die impression-to-floor distance:750 mm.
die impression size:                    530 x 300 mm.
steam/air pressure                      0.7-0.9 mpa
copressed air pressure                  0.6-0.8 mpa
cylinder diametr:                       380 mm. 
overal dimensions                       5900x1930x5000 mm
mass (less anvil block)                 20,1 tons 
mass of anvil block                     30,0 tons 

      -     subject to prior sale – 
      -     prior to errors and technical condition –  NOMINAL MASS OF DROP PARTS KG 2000 RATED STRIKING ENERGY 50 KJ MAX. NO. OF BLOWS/MIN. 50 STROKE, MAX.: 1200 MM. DISTANCE CLEAR BETWEEN COLUMNS: 2300 MM. WORKING ZONE DAYLIGHT: 530 MM. BOTTOM DIE IMPRESSION-TO-FLOOR DISTANCE:750 MM. DIE IMPRESSION SIZE: 530 X 300 MM. STEAM/AIR PRESSURE 0.7-0.9 MPA COPRESSED AIR PRESSURE 0.6-0.8 MPA CYLINDER DIAMETR: 380 MM. OVERAL DIMENSIONS 5900X1930X5000 MM MASS (LESS ANVIL BLOCK) 20,1 TONS MASS OF ANVIL BLOCK 30,0 TONS - SUBJECT TO PRIOR SALE – - PRIOR TO ERRORS AND TECHNICAL CONDITION –
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-crank press voronezh, type k274a
effort 315 to
stroke 210 mm
20 s.p.m.
table 1120 x 1000 mm
ram 950 x 800 mm
good working condition
 CRANK PRESS VORONEZH, TYPE K274A EFFORT 315 TO STROKE 210 MM 20 S.P.M. TABLE 1120 X 1000 MM RAM 950 X 800 MM GOOD WORKING CONDITION
Vendedor: MachTechnica Ltd.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)