13 ofertas

Año de construcción: usado
Ubicación: Land-qty. 1 second-hand aluminium foil rolling mill plant
mfc.:	robertson, kampf, schmutz, nishimura, waldrich-siegen, otto-junker
built:	1962 – 1989	foil width: 850 mm	entry thickness:  0.4 mm	
exit: 2 x 7 microns	
scope of supply:	roughing foil rolling mill: 4-hi 	
intermediate foil mill 4-hi
finishing foil mill 4-hi		slitters – qty. 4	roll grinders – qty. 2
annealing furnaces – qty. 4		charging car

individual items can be sold!! QTY. 1 SECOND-HAND ALUMINIUM FOIL ROLLING MILL PLANT MFC.: ROBERTSON, KAMPF, SCHMUTZ, NISHIMURA, WALDRICH-SIEGEN, OTTO-JUNKER BUILT: 1962 – 1989 FOIL WIDTH: 850 MM ENTRY THICKNESS: 0.4 MM EXIT: 2 X 7 MICRONS SCOPE OF SUPPLY: ROUGHING FOIL ROLLING MILL: 4-HI INTERMEDIATE FOIL MILL 4-HI FINISHING FOIL MILL 4-HI SLITTERS – QTY. 4 ROLL GRINDERS – QTY. 2 ANNEALING FURNACES – QTY. 4 CHARGING CAR INDIVIDUAL ITEMS CAN BE SOLD!!
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-x-travel: 5750 mm<br/>y-travel: 2500 mm<br/>z-travel: 1700 mm<br/>control:  <br/><br/><br/><br/><br/> X-TRAVEL: 5750 MM
Y-TRAVEL: 2500 MM
Z-TRAVEL: 1700 MM
CONTROL:




Vendedor: Gromag AG
Año de construcción: usado
Ubicación: Land-heavy duty lathe waldrich

distance between centers: 12000 mm
turning diameter:
-over bed: 2000 mm
-over cross slide: 1640 mm
weight of work piece: max 40 ton
spindle speed range, stepless: 1,5-92,5 rpm
year of manufacturing: 1960               HEAVY DUTY LATHE WALDRICH DISTANCE BETWEEN CENTERS: 12000 MM TURNING DIAMETER: -OVER BED: 2000 MM -OVER CROSS SLIDE: 1640 MM WEIGHT OF WORK PIECE: MAX 40 TON SPINDLE SPEED RANGE, STEPLESS: 1,5-92,5 RPM YEAR OF MANUFACTURING: 1960
Vendedor: Suomen Keskusvarikko Oy
Año de construcción: usado
Ubicación: Land-grinding diameter:750 mm<br/>grinding length:4500 mm<br/>centre height:375 mm<br/>total power requirement: kw<br/><br/>capacity maximum diameter over bed 750mm maximum distance between centres 4,500mm maximum weight of roll 6,000kg maximum wheel size 750mm dia. x 65mm wide  machine data year 1978 serial number: 12502  standard equipment cambering wheel balancing journal rests spare wheel adapters   electrical supply wheel head motor 11 - 22kw variable speed work head motor 1.5 - 6kw variable speed table drive motor 0.7 - 3.7kw variable speed 415v 3 phase supply 50hz GRINDING DIAMETER:750 MM
GRINDING LENGTH:4500 MM
CENTRE HEIGHT:375 MM
TOTAL POWER REQUIREMENT: KW

CAPACITY MAXIMUM DIAMETER OVER BED 750MM MAXIMUM DISTANCE BETWEEN CENTRES 4,500MM MAXIMUM WEIGHT OF ROLL 6,000KG MAXIMUM WHEEL SIZE 750MM DIA. X 65MM WIDE MACHINE DATA YEAR 1978 SERIAL NUMBER: 12502 STANDARD EQUIPMENT CAMBERING WHEEL BALANCING JOURNAL RESTS SPARE WHEEL ADAPTERS ELECTRICAL SUPPLY WHEEL HEAD MOTOR 11 - 22KW VARIABLE SPEED WORK HEAD MOTOR 1.5 - 6KW VARIABLE SPEED TABLE DRIVE MOTOR 0.7 - 3.7KW VARIABLE SPEED 415V 3 PHASE SUPPLY 50HZ
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 16000 mm<br/>y-travel: 5000 mm<br/>z-travel: 2450 mm<br/>w-travel: 400 mm<br/>table:: 2 x 7500 x 3000 <br/>double table: 15.700 x 3000 mm<br/>table load: 150 t<br/>max. passage: 3250 mm<br/>diameter of quill: 320 mm<br/>spindle turning speed range: 6-200, 200-600 u/min<br/>transmission ratio: 2 <br/>drive capacity - spindle motor: 95 kw<br/>spindle taper: iso 60 <br/>electrics - voltage/frequency: 380/50 v/hz<br/>control: siemens 840 d sl <br/>weight of the machine ca.: 260 t<br/>dimensions of the machine ca.: 34000 x 10000 x 6000 m<br/>angular milling head: 10x <br/>retrofit in 2016:<br/>- electrics including cabling and cabinet new<br/>- new cnc-control siemens 840 d solution line<br/>- hydrostatic guideways for table with 6 pumps and 2 pumps for tank<br/>- change from dc to ac (motors)<br/>- all guideways geometrically overhauled (laser measured)<br/>- modifcation cross beam to gantry type<br/>- all guideway covers new - delivery end of october 2016<br/>- spindle drive changed into 3-phase current<br/>- misc. milling heads - 10 pcs. - especially for diesel-engines<br/><br/>+++++++++++++++under power inspectable by november 2016 +++++++++++++++<br/><br/><br/><br/><br/> X-TRAVEL: 16000 MM
Y-TRAVEL: 5000 MM
Z-TRAVEL: 2450 MM
W-TRAVEL: 400 MM
TABLE:: 2 X 7500 X 3000
DOUBLE TABLE: 15.700 X 3000 MM
TABLE LOAD: 150 T
MAX. PASSAGE: 3250 MM
DIAMETER OF QUILL: 320 MM
SPINDLE TURNING SPEED RANGE: 6-200, 200-600 U/MIN
TRANSMISSION RATIO: 2
DRIVE CAPACITY - SPINDLE MOTOR: 95 KW
SPINDLE TAPER: ISO 60
ELECTRICS - VOLTAGE/FREQUENCY: 380/50 V/HZ
CONTROL: SIEMENS 840 D SL
WEIGHT OF THE MACHINE CA.: 260 T
DIMENSIONS OF THE MACHINE CA.: 34000 X 10000 X 6000 M
ANGULAR MILLING HEAD: 10X
RETROFIT IN 2016:
- ELECTRICS INCLUDING CABLING AND CABINET NEW
- NEW CNC-CONTROL SIEMENS 840 D SOLUTION LINE
- HYDROSTATIC GUIDEWAYS FOR TABLE WITH 6 PUMPS AND 2 PUMPS FOR TANK
- CHANGE FROM DC TO AC (MOTORS)
- ALL GUIDEWAYS GEOMETRICALLY OVERHAULED (LASER MEASURED)
- MODIFCATION CROSS BEAM TO GANTRY TYPE
- ALL GUIDEWAY COVERS NEW - DELIVERY END OF OCTOBER 2016
- SPINDLE DRIVE CHANGED INTO 3-PHASE CURRENT
- MISC. MILLING HEADS - 10 PCS. - ESPECIALLY FOR DIESEL-ENGINES

+++++++++++++++UNDER POWER INSPECTABLE BY NOVEMBER 2016 +++++++++++++++




Vendedor: SK Maschinen-Service GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 3000 mm<br/>turning diameter over slide rest: 2650 mm<br/>turning length: 19000 mm<br/>control: siemens <br/>type: 840 c mm<br/>faceplate: 2500 mm<br/>turning speeds: 0,65-99,2 u/min<br/>rest: 2 <br/>steady: 2400 mm<br/>steady: 900 mm<br/>steady: 900 mm<br/>steady: 500 mm<br/>main drive motor: 180 kw<br/>workpiece weight: 100 t<br/>chip conveyor:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 3000 MM
TURNING DIAMETER OVER SLIDE REST: 2650 MM
TURNING LENGTH: 19000 MM
CONTROL: SIEMENS
TYPE: 840 C MM
FACEPLATE: 2500 MM
TURNING SPEEDS: 0,65-99,2 U/MIN
REST: 2
STEADY: 2400 MM
STEADY: 900 MM
STEADY: 900 MM
STEADY: 500 MM
MAIN DRIVE MOTOR: 180 KW
WORKPIECE WEIGHT: 100 T
CHIP CONVEYOR:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-throat: 760 mm<br/>flange:: 500x500 mm<br/>width of nail head: 230x170 mm<br/>tool adaptor:  nach din<br/>power requirement:  kw<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> THROAT: 760 MM
FLANGE:: 500X500 MM
WIDTH OF NAIL HEAD: 230X170 MM
TOOL ADAPTOR: NACH DIN
POWER REQUIREMENT: KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 1420 mm<br/>turning diameter over slide: 1300 mm<br/>turning length: 8000 mm<br/>centre distance: 8500 mm<br/>faceplate diameter: 1100 mm<br/>travel of upper support: 500 mm<br/>workpiece weight max.: 45.000 kg<br/>centre height: 790 mm<br/>spindle turning speed range: 0,6 - 48,2 u/min<br/>power capacity: 110 kw<br/>weight of the machine ca.: 52 t<br/>dimensions of the machine ca.:  m<br/>retrofited in 2006 by sustrai<br/>the retrofitting consisted in the substitution of the electrical boards, and <br/>the saddle was fitted with servo-motors and ball-screw operated by fagor <br/>regulators.<br/>after this modification this machine it is still basically manual and was only <br/>used for roughing operations of bur and roughing work rolls.<br/><br/>- 3 guideway bed<br/>- counterstay<br/>- 1 open steady<br/>- copying system (to make radius) was dismantled<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 1420 MM
TURNING DIAMETER OVER SLIDE: 1300 MM
TURNING LENGTH: 8000 MM
CENTRE DISTANCE: 8500 MM
FACEPLATE DIAMETER: 1100 MM
TRAVEL OF UPPER SUPPORT: 500 MM
WORKPIECE WEIGHT MAX.: 45.000 KG
CENTRE HEIGHT: 790 MM
SPINDLE TURNING SPEED RANGE: 0,6 - 48,2 U/MIN
POWER CAPACITY: 110 KW
WEIGHT OF THE MACHINE CA.: 52 T
DIMENSIONS OF THE MACHINE CA.: M
RETROFITED IN 2006 BY SUSTRAI
THE RETROFITTING CONSISTED IN THE SUBSTITUTION OF THE ELECTRICAL BOARDS, AND
THE SADDLE WAS FITTED WITH SERVO-MOTORS AND BALL-SCREW OPERATED BY FAGOR
REGULATORS.
AFTER THIS MODIFICATION THIS MACHINE IT IS STILL BASICALLY MANUAL AND WAS ONLY
USED FOR ROUGHING OPERATIONS OF BUR AND ROUGHING WORK ROLLS.

- 3 GUIDEWAY BED
- COUNTERSTAY
- 1 OPEN STEADY
- COPYING SYSTEM (TO MAKE RADIUS) WAS DISMANTLED




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 1800 mm<br/>grinding length: 10000 mm<br/>swing diameter: 2000 mm<br/>grinding diameter - min.: 80 mm<br/>grinding length: min. 800 mm<br/>workpiece weight: 50 t<br/>grinding spindle speed: 5 - 1400 u/min<br/>roll drive: 0 - 150 u/min<br/>feed speeds: z = 10 m/min<br/>feed speeds: x =  5 m/min<br/>feed speeds: q1 = 2 m/min<br/>feed speeds: q2 = 2 m/min<br/>travel -z axis: 11020 mm<br/>travel -x axis: 850 mm<br/>u-axis: -4,91 / + 4,95 = 9,86 mm<br/>roll drive: 51 kw<br/>grinding wheel motor: 22 kw<br/>total power requirement: ca. 100 kw<br/>weight of the machine ca.: 78 t<br/>dimensions of the machine ca.: 15 x 3 x 2 m<br/>2002 + 2009 retrofit and new cnc control siemens sinumerik 840 d <br/>with simodrive 6110 and measuring system<br/>concave- and convex grinding ( crowning )<br/>steady rests, coolant, lot of accessories and toolings etc.<br/><br/>machine in very nice condition, under power ex factory<br/><br/><br/><br/> GRINDING DIAMETER: 1800 MM
GRINDING LENGTH: 10000 MM
SWING DIAMETER: 2000 MM
GRINDING DIAMETER - MIN.: 80 MM
GRINDING LENGTH: MIN. 800 MM
WORKPIECE WEIGHT: 50 T
GRINDING SPINDLE SPEED: 5 - 1400 U/MIN
ROLL DRIVE: 0 - 150 U/MIN
FEED SPEEDS: Z = 10 M/MIN
FEED SPEEDS: X = 5 M/MIN
FEED SPEEDS: Q1 = 2 M/MIN
FEED SPEEDS: Q2 = 2 M/MIN
TRAVEL -Z AXIS: 11020 MM
TRAVEL -X AXIS: 850 MM
U-AXIS: -4,91 / + 4,95 = 9,86 MM
ROLL DRIVE: 51 KW
GRINDING WHEEL MOTOR: 22 KW
TOTAL POWER REQUIREMENT: CA. 100 KW
WEIGHT OF THE MACHINE CA.: 78 T
DIMENSIONS OF THE MACHINE CA.: 15 X 3 X 2 M
2002 + 2009 RETROFIT AND NEW CNC CONTROL SIEMENS SINUMERIK 840 D
WITH SIMODRIVE 6110 AND MEASURING SYSTEM
CONCAVE- AND CONVEX GRINDING ( CROWNING )
STEADY RESTS, COOLANT, LOT OF ACCESSORIES AND TOOLINGS ETC.

MACHINE IN VERY NICE CONDITION, UNDER POWER EX FACTORY



Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 5750 mm<br/>y-travel: 2500 mm<br/>z-travel: 1700 mm<br/>control: siemens 840 d <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.: 9,87 x 7,66 x 6,37 m<br/><br/><br/><br/><br/> X-TRAVEL: 5750 MM
Y-TRAVEL: 2500 MM
Z-TRAVEL: 1700 MM
CONTROL: SIEMENS 840 D
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: 9,87 X 7,66 X 6,37 M




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-x-travel:5750 mm<br/>y-travel:2500 mm<br/>z-travel:1700 mm<br/>dimensions of the machine ca.:9,87 x 7,66 x 6,37 m<br/>height over floor:6200 mm<br/>workpiece width - max.:2500 mm<br/>surface area:2500 x 2500 mm<br/>workpiece weight:50 t<br/>w-axis:200 mm<br/>main spindle capacity:30 kw<br/>rotary speed of motor:400-7600 u/min<br/>tool taper:hsk-a 80 <br/>weight:100 t<br/><br/>5 axis simultaneus portal milling machine X-TRAVEL:5750 MM
Y-TRAVEL:2500 MM
Z-TRAVEL:1700 MM
DIMENSIONS OF THE MACHINE CA.:9,87 X 7,66 X 6,37 M
HEIGHT OVER FLOOR:6200 MM
WORKPIECE WIDTH - MAX.:2500 MM
SURFACE AREA:2500 X 2500 MM
WORKPIECE WEIGHT:50 T
W-AXIS:200 MM
MAIN SPINDLE CAPACITY:30 KW
ROTARY SPEED OF MOTOR:400-7600 U/MIN
TOOL TAPER:HSK-A 80
WEIGHT:100 T

5 AXIS SIMULTANEUS PORTAL MILLING MACHINE
Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-weight approx.: 61000 kg<br/>grinding length: 12000 mm<br/>grinding diameter: 1980 mm<br/>dimensions (l x w x h) approx.: 18600 x 5600 x 2300 mm<br/>max. workpiece weight: 80000 kg<br/>grinding wheel size: 812 x 100 x 305 mm<br/>grinding spindle speed: 450 - 1800 rpm<br/>work piece spindle speed: 0.5 - 300 rpm<br/>total power requirement: 110 kw<br/>description: waldrich-siegen wst iv h80 x 12000 roll grinding machine - hydrostatic guide ways - belt grinding attachment - cambering convex / concav - 2 steady rests (200 - 510 mm) WEIGHT APPROX.: 61000 KG
GRINDING LENGTH: 12000 MM
GRINDING DIAMETER: 1980 MM
DIMENSIONS (L X W X H) APPROX.: 18600 X 5600 X 2300 MM
MAX. WORKPIECE WEIGHT: 80000 KG
GRINDING WHEEL SIZE: 812 X 100 X 305 MM
GRINDING SPINDLE SPEED: 450 - 1800 RPM
WORK PIECE SPINDLE SPEED: 0.5 - 300 RPM
TOTAL POWER REQUIREMENT: 110 KW
DESCRIPTION: WALDRICH-SIEGEN WST IV H80 X 12000 ROLL GRINDING MACHINE - HYDROSTATIC GUIDE WAYS - BELT GRINDING ATTACHMENT - CAMBERING CONVEX / CONCAV - 2 STEADY RESTS (200 - 510 MM)
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more WALDRICH types: