48 ofertas

Año de construcción: usado
Precio: 2.850 €
Ubicación: Land-white 91 portioning machine used

hourly throughput approx.: 1400 portions
emissions er diameter: 90 mm (other dishes on request)
setting via rotary knob on the side
with mobile stand
older machine with appropriate use and wear
box jumps, yet neat and quiet running
machine must be cleaned thoroughly before use

video about test run and more pictures available
  WHITE 91 PORTIONING MACHINE USED HOURLY THROUGHPUT APPROX.: 1400 PORTIONS EMISSIONS ER DIAMETER: 90 MM (OTHER DISHES ON REQUEST) SETTING VIA ROTARY KNOB ON THE SIDE WITH MOBILE STAND OLDER MACHINE WITH APPROPRIATE USE AND WEAR BOX JUMPS, YET NEAT AND QUIET RUNNING MACHINE MUST BE CLEANED THOROUGHLY BEFORE USE VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 580 mm<br/>turning diameter over slide rest: 300 mm<br/>turning length: 3000 mm<br/>spindle bore: 70 mm<br/>turning speeds: 28 - 1400 u/min<br/>total power requirement: 10 kw<br/>weight of the machine ca.: 4,2 t<br/>dimensions of the machine ca.: 5,1x 1,4 x 1,7 m<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 580 MM
TURNING DIAMETER OVER SLIDE REST: 300 MM
TURNING LENGTH: 3000 MM
SPINDLE BORE: 70 MM
TURNING SPEEDS: 28 - 1400 U/MIN
TOTAL POWER REQUIREMENT: 10 KW
WEIGHT OF THE MACHINE CA.: 4,2 T
DIMENSIONS OF THE MACHINE CA.: 5,1X 1,4 X 1,7 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.215 €
Ubicación: Land-white bpm33 butter portionieren machine second-hand

for the processing of 4 x 250 g block butter or up to 1 kg of self produced butter
flap back opens, plunger pulled, blocks or butter inserted. flap closed, guard mounted and portioned the butter either automatic or manual mode
serving size on side lever adjustable
discount arm, as well as all parts that come in contact with butter are simply removable
second-hand machine should be cleaned yet thoroughly in proper condition before use
the safety equipment was financed by the previous owner, because the cover is missing.

video about test run and more pictures available WHITE BPM33 BUTTER PORTIONIEREN MACHINE SECOND-HAND FOR THE PROCESSING OF 4 X 250 G BLOCK BUTTER OR UP TO 1 KG OF SELF PRODUCED BUTTER FLAP BACK OPENS, PLUNGER PULLED, BLOCKS OR BUTTER INSERTED. FLAP CLOSED, GUARD MOUNTED AND PORTIONED THE BUTTER EITHER AUTOMATIC OR MANUAL MODE SERVING SIZE ON SIDE LEVER ADJUSTABLE DISCOUNT ARM, AS WELL AS ALL PARTS THAT COME IN CONTACT WITH BUTTER ARE SIMPLY REMOVABLE SECOND-HAND MACHINE SHOULD BE CLEANED YET THOROUGHLY IN PROPER CONDITION BEFORE USE THE SAFETY EQUIPMENT WAS FINANCED BY THE PREVIOUS OWNER, BECAUSE THE COVER IS MISSING. VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: 550 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.690 €
Ubicación: Land-white bpm33 butter portionieren machine second-hand

for the processing of 4 x 250 g block butter or up to 1 kg of self produced butter
flap back opens, plunger pulled, blocks or butter inserted. flap closed, guard mounted and portioned the butter either automatic or manual mode
serving size on side lever adjustable
discount arm, as well as all parts that come in contact with butter are simply removable
second-hand machine should be cleaned still in very good condition, before use

video about test run and more pictures available WHITE BPM33 BUTTER PORTIONIEREN MACHINE SECOND-HAND FOR THE PROCESSING OF 4 X 250 G BLOCK BUTTER OR UP TO 1 KG OF SELF PRODUCED BUTTER FLAP BACK OPENS, PLUNGER PULLED, BLOCKS OR BUTTER INSERTED. FLAP CLOSED, GUARD MOUNTED AND PORTIONED THE BUTTER EITHER AUTOMATIC OR MANUAL MODE SERVING SIZE ON SIDE LEVER ADJUSTABLE DISCOUNT ARM, AS WELL AS ALL PARTS THAT COME IN CONTACT WITH BUTTER ARE SIMPLY REMOVABLE SECOND-HAND MACHINE SHOULD BE CLEANED STILL IN VERY GOOD CONDITION, BEFORE USE VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 5.900 €
Ubicación: Land-
manufacturer: white heilbronn
type: junior

top width: 1,000 mm
tip height: 150 mm
maximum turning diameter over bed: 450 mm
spindle speeds: 40-2,000 rpm

3 - jaw chuck
multifix

voltage: 380 v
output: 4 kw
dimensions w x d x h: 2,400 x 1,000 x 1,650 mm

price plus 19% vat from site near pforzheim
mistakes and intermediate sale is reserved MANUFACTURER: WHITE HEILBRONN TYPE: JUNIOR TOP WIDTH: 1,000 MM TIP HEIGHT: 150 MM MAXIMUM TURNING DIAMETER OVER BED: 450 MM SPINDLE SPEEDS: 40-2,000 RPM 3 - JAW CHUCK MULTIFIX VOLTAGE: 380 V OUTPUT: 4 KW DIMENSIONS W X D X H: 2,400 X 1,000 X 1,650 MM PRICE PLUS 19% VAT FROM SITE NEAR PFORZHEIM MISTAKES AND INTERMEDIATE SALE IS RESERVED
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Precio: 320 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-lathe of white
giant
nklfj
year 1976
from the factory LATHE OF WHITE GIANT NKLFJ YEAR 1976 FROM THE FACTORY
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 3.150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-white univertor ii m-1 vertical turning. yom: 2000
vertical lathe
WHITE UNIVERTOR II M-1 VERTICAL TURNING. YOM: 2000 VERTICAL LATHE
Vendedor: Maynards Europe GmbH
Año de construcción: usado
Precio: 480 €
Ubicación: Land-bezel, buttstock, lynette <br /><br /> -bezel comes from a weisser heibronn type 29 lathe <br /> -max passage o 173 mm <br /> - top height 245 mm <br /> -pad ball bearing <br /> -technical drawing in the photos <br /> -dimensions 440/80 / h500 mm <br /> -weight 23 kg BEZEL, BUTTSTOCK, LYNETTE

-BEZEL COMES FROM A WEISSER HEIBRONN TYPE 29 LATHE
-MAX PASSAGE O 173 MM
- TOP HEIGHT 245 MM
-PAD BALL BEARING
-TECHNICAL DRAWING IN THE PHOTOS
-DIMENSIONS 440/80 / H500 MM
-WEIGHT 23 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-tip height: 200 mm top width: 2000 mm circular diameter: bed 410 mm spindle bore: 45 mm spindle retainer: gr. 6 taper tailstock: 4 mk spindle speed: 63-1000 rpm feeds: longitudinal/plan 0.05 0.45/0.025 0.224 mm / u thread pitches: 0.5-7 mm electric to conclusion: 380 v, 4 kw space: 3400 x 1000 x 1650 mm weight: 2100 kg 
 TIP HEIGHT: 200 MM TOP WIDTH: 2000 MM CIRCULAR DIAMETER: BED 410 MM SPINDLE BORE: 45 MM SPINDLE RETAINER: GR. 6 TAPER TAILSTOCK: 4 MK SPINDLE SPEED: 63-1000 RPM FEEDS: LONGITUDINAL/PLAN 0.05 0.45/0.025 0.224 MM / U THREAD PITCHES: 0.5-7 MM ELECTRIC TO CONCLUSION: 380 V, 4 KW SPACE: 3400 X 1000 X 1650 MM WEIGHT: 2100 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter:400 mm<br/>turning length:120 mm<br/>control:sinumerik 840 d <br/>weight of the machine ca.:11 t<br/>dimensions of the machine ca.:4,1 x 2,2 x 2,5 m<br/><br/>cnc vertical turning lathe with siemens sinumerik 840 d control out of oem production in good condition. more technical features:  x-axis 400 mm z-axis 280 mm rapid power traverse in x-and z direction 60 / 30 m/min feeding force 10 / 8 kn turning speeds 3000 u/min front bearing 90 mm TURNING DIAMETER:400 MM
TURNING LENGTH:120 MM
CONTROL:SINUMERIK 840 D
WEIGHT OF THE MACHINE CA.:11 T
DIMENSIONS OF THE MACHINE CA.:4,1 X 2,2 X 2,5 M

CNC VERTICAL TURNING LATHE WITH SIEMENS SINUMERIK 840 D CONTROL OUT OF OEM PRODUCTION IN GOOD CONDITION. MORE TECHNICAL FEATURES: X-AXIS 400 MM Z-AXIS 280 MM RAPID POWER TRAVERSE IN X-AND Z DIRECTION 60 / 30 M/MIN FEEDING FORCE 10 / 8 KN TURNING SPEEDS 3000 U/MIN FRONT BEARING 90 MM
Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-there are four lathes available, the technical data are identical with every machine: machining area: 2x 280x150mm, max. rotational speed: 4500/min, revolver: 2x 8 tool slots, tool mount: vdi 40, chuck diameter: 2x 200mm, controls: siemens 840c, including gantry loader with pallet conveyor, year of construction 1/ 2/ 3/ 4: 1993/ 1994/ 1995/ 1999, machine 1 was overhauled in 2000, machine 2 is not functional and can provide spare parts.   THERE ARE FOUR LATHES AVAILABLE, THE TECHNICAL DATA ARE IDENTICAL WITH EVERY MACHINE: MACHINING AREA: 2X 280X150MM, MAX. ROTATIONAL SPEED: 4500/MIN, REVOLVER: 2X 8 TOOL SLOTS, TOOL MOUNT: VDI 40, CHUCK DIAMETER: 2X 200MM, CONTROLS: SIEMENS 840C, INCLUDING GANTRY LOADER WITH PALLET CONVEYOR, YEAR OF CONSTRUCTION 1/ 2/ 3/ 4: 1993/ 1994/ 1995/ 1999, MACHINE 1 WAS OVERHAULED IN 2000, MACHINE 2 IS NOT FUNCTIONAL AND CAN PROVIDE SPARE PARTS.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 3600 mm<br/>turning diameter over slide rest: . mm<br/>turning length: 10500 mm<br/>total power requirement: 22 kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 3600 MM
TURNING DIAMETER OVER SLIDE REST: . MM
TURNING LENGTH: 10500 MM
TOTAL POWER REQUIREMENT: 22 KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-
engine lathe weisser heilbronn model goliath
    centre distance: 1000mm
    centre height: 225mm
    spindlebore: 50mm
    spindelspeeds: 5,6 tot 1120
chuck  250mm forkhardt
weight 3500 à 4000kg
y.o.m. 1970
good working condition
  ENGINE LATHE WEISSER HEILBRONN MODEL GOLIATH CENTRE DISTANCE: 1000MM CENTRE HEIGHT: 225MM SPINDLEBORE: 50MM SPINDELSPEEDS: 5,6 TOT 1120 CHUCK 250MM FORKHARDT WEIGHT 3500 à 4000KG Y.O.M. 1970 GOOD WORKING CONDITION
Vendedor: Veltman Machines BV
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning length: 400 mm<br/>control: sin 840d <br/>swing diameter: max. 300 mm<br/>workpiece length - max.: 400 mm<br/>travel -x axis: 280 mm<br/>feed in x - axis: 0,1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>travel -z axis: 1.150 mm<br/>work stroke: z: 500 mm<br/>feed in z-axis: 0,1 - 60.000 mm/min<br/>rapid traverse z-axis: 60,00 m/min<br/>spindle bearing diameter: 90 mm<br/>spindle head din55026 - size: a6 <br/>turning speed range - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 23,00 kw<br/>power capacity at 100 % load: 18,10 kw<br/>tool turret: 12-fach <br/>tool taper: capto c4 <br/>tailstock travel: w1: 200 mm<br/>tailstock quill taper mt: 4 <br/>steady stroke: w3: 200 mm<br/>passage of steadyrest: 10 - 70 mm<br/>total power requirement: 45,00 kw<br/>weight of the machine ca.: 11,00 t<br/>dimensions of the machine ca.: 7,00 x 5,00 x h3,20 m m<br/>cnc lathe with siemens sinumerik 840d control, screw conveyor<br/>with chip breaker and return pumping station, nc-steady smw-slu-1-old Ø10-70mm, <br/>12-fold tool turret sauter 0.5.460.220, nc tailstock, artis monitoring, <br/>pikup-loading incl. conveyor.<br/>without coolant system, was connected to central supply.<br/>machine can be inspected under power.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
TURNING LENGTH: 400 MM
CONTROL: SIN 840D
SWING DIAMETER: MAX. 300 MM
WORKPIECE LENGTH - MAX.: 400 MM
TRAVEL -X AXIS: 280 MM
FEED IN X - AXIS: 0,1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
TRAVEL -Z AXIS: 1.150 MM
WORK STROKE: Z: 500 MM
FEED IN Z-AXIS: 0,1 - 60.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 60,00 M/MIN
SPINDLE BEARING DIAMETER: 90 MM
SPINDLE HEAD DIN55026 - SIZE: A6
TURNING SPEED RANGE - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 23,00 KW
POWER CAPACITY AT 100 % LOAD: 18,10 KW
TOOL TURRET: 12-FACH
TOOL TAPER: CAPTO C4
TAILSTOCK TRAVEL: W1: 200 MM
TAILSTOCK QUILL TAPER MT: 4
STEADY STROKE: W3: 200 MM
PASSAGE OF STEADYREST: 10 - 70 MM
TOTAL POWER REQUIREMENT: 45,00 KW
WEIGHT OF THE MACHINE CA.: 11,00 T
DIMENSIONS OF THE MACHINE CA.: 7,00 X 5,00 X H3,20 M M
CNC LATHE WITH SIEMENS SINUMERIK 840D CONTROL, SCREW CONVEYOR
WITH CHIP BREAKER AND RETURN PUMPING STATION, NC-STEADY SMW-SLU-1-OLD Ø10-70MM,
12-FOLD TOOL TURRET SAUTER 0.5.460.220, NC TAILSTOCK, ARTIS MONITORING,
PIKUP-LOADING INCL. CONVEYOR.
WITHOUT COOLANT SYSTEM, WAS CONNECTED TO CENTRAL SUPPLY.
MACHINE CAN BE INSPECTED UNDER POWER.





Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-control: siemens 810 x 250mm / 1000 mm<br/>  hand wheels<br/>  tailstock<br/>  was used in training workshop. CONTROL: SIEMENS 810 X 250MM / 1000 MM
HAND WHEELS
TAILSTOCK
WAS USED IN TRAINING WORKSHOP.
Vendedor: KADIGO Werkzeugmaschinen & Zubehör Handels GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning length: 400 mm<br/>control: sin 840d <br/>swing diameter: max. 300 mm<br/>workpiece length - max.: 400 mm<br/>travel -x axis: 280 mm<br/>feed in x - axis: 0,1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>travel -z axis: 1.150 mm<br/>work stroke: z: 500 mm<br/>feed in z-axis: 0,1 - 60.000 mm/min<br/>rapid traverse z-axis: 60,00 m/min<br/>spindle bearing diameter: 90 mm<br/>spindle head din55026 - size: a6 <br/>turning speed range - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 23,00 kw<br/>power capacity at 100 % load: 18,10 kw<br/>tool turret: 12-fach <br/>tool taper: capto c4 <br/>tailstock travel: w1: 298 mm<br/>tailstock quill taper mt: 4 <br/>steady stroke: w3: 118 mm<br/>passage of steadyrest: 10 - 70 mm<br/>total power requirement: 45,00 kw<br/>weight of the machine ca.: 11,00 t<br/>dimensions of the machine ca.: 7,00 x 5,00 x h3,20 m m<br/>cnc lathe with siemens sinumerik 840d control, screw conveyor <br/>with chip breaker and return pumping station, nc-steady smw-slu-1-old Ø10-70mm, <br/>12-fold tool turret sauter 0.5.460.220, nc tailstock, artis monitoring, <br/>pikup-loading incl. conveyor. <br/>without coolant system, was connected to central supply.<br/>machine can be inspected under power.<br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
TURNING LENGTH: 400 MM
CONTROL: SIN 840D
SWING DIAMETER: MAX. 300 MM
WORKPIECE LENGTH - MAX.: 400 MM
TRAVEL -X AXIS: 280 MM
FEED IN X - AXIS: 0,1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
TRAVEL -Z AXIS: 1.150 MM
WORK STROKE: Z: 500 MM
FEED IN Z-AXIS: 0,1 - 60.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 60,00 M/MIN
SPINDLE BEARING DIAMETER: 90 MM
SPINDLE HEAD DIN55026 - SIZE: A6
TURNING SPEED RANGE - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 23,00 KW
POWER CAPACITY AT 100 % LOAD: 18,10 KW
TOOL TURRET: 12-FACH
TOOL TAPER: CAPTO C4
TAILSTOCK TRAVEL: W1: 298 MM
TAILSTOCK QUILL TAPER MT: 4
STEADY STROKE: W3: 118 MM
PASSAGE OF STEADYREST: 10 - 70 MM
TOTAL POWER REQUIREMENT: 45,00 KW
WEIGHT OF THE MACHINE CA.: 11,00 T
DIMENSIONS OF THE MACHINE CA.: 7,00 X 5,00 X H3,20 M M
CNC LATHE WITH SIEMENS SINUMERIK 840D CONTROL, SCREW CONVEYOR
WITH CHIP BREAKER AND RETURN PUMPING STATION, NC-STEADY SMW-SLU-1-OLD Ø10-70MM,
12-FOLD TOOL TURRET SAUTER 0.5.460.220, NC TAILSTOCK, ARTIS MONITORING,
PIKUP-LOADING INCL. CONVEYOR.
WITHOUT COOLANT SYSTEM, WAS CONNECTED TO CENTRAL SUPPLY.
MACHINE CAN BE INSPECTED UNDER POWER.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-white goliath gsa high performance lathe with automatic thread cutting system<br/>  <br/>  built in 1982<br/>  maximum swing over bed 450 mm<br/>  over bed slide 240 mm<br/>  top width 2000 mm<br/>  spindle speed 7.1-1400 rpm<br/>  spindle nose gr. 8<br/>  spindle bore 70 mm<br/>  main drive 15 kw<br/>  forkardt rotary feed 250 mm<br/>  quill way 250 mm<br/>  weight approx. 5000 kg<br/>  <br/>  accessories: thread cutting automatic, digital display, coolant system, multi fix toolpost, feed in the upper support, lynette, centre point... WHITE GOLIATH GSA HIGH PERFORMANCE LATHE WITH AUTOMATIC THREAD CUTTING SYSTEM

BUILT IN 1982
MAXIMUM SWING OVER BED 450 MM
OVER BED SLIDE 240 MM
TOP WIDTH 2000 MM
SPINDLE SPEED 7.1-1400 RPM
SPINDLE NOSE GR. 8
SPINDLE BORE 70 MM
MAIN DRIVE 15 KW
FORKARDT ROTARY FEED 250 MM
QUILL WAY 250 MM
WEIGHT APPROX. 5000 KG

ACCESSORIES: THREAD CUTTING AUTOMATIC, DIGITAL DISPLAY, COOLANT SYSTEM, MULTI FIX TOOLPOST, FEED IN THE UPPER SUPPORT, LYNETTE, CENTRE POINT...
Vendedor: Zölch GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning length: 400 mm<br/>control: sin 840d <br/>swing diameter: max. 300 mm<br/>workpiece length - max.: 400 mm<br/>travel -x axis: 280 mm<br/>feed in x - axis: 0,1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>travel -z axis: 1.150 mm<br/>work stroke: z: 500 mm<br/>feed in z-axis: 0,1 - 60.000 mm/min<br/>rapid traverse z-axis: 60,00 m/min<br/>spindle bearing diameter: 90 mm<br/>spindle head din55026 - size: a6 <br/>turning speed range - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 23,00 kw<br/>power capacity at 100 % load: 18,10 kw<br/>tool turret: 12-fach <br/>tool taper: capto c4 <br/>tailstock travel: w1: 298 mm<br/>tailstock quill taper mt: 4 <br/>steady stroke: w3: 118 mm<br/>passage of steadyrest: 10 - 70 mm<br/>total power requirement: 45,00 kw<br/>weight of the machine ca.: 11,00 t<br/>dimensions of the machine ca.: 7,00 x 5,00 x h3,20 m m<br/>cnc lathe with siemens sinumerik 840d control, screw conveyor<br/>with chip breaker and return pumping station, nc-steady smw-slu-1-old Ø10-70mm, <br/>12-fold tool turret sauter 0.5.460.220, nc tailstock, artis monitoring, <br/>pikup-loading incl. conveyor. <br/>without coolant system, was connected to central supply.<br/>machine can be inspected under power.<br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
TURNING LENGTH: 400 MM
CONTROL: SIN 840D
SWING DIAMETER: MAX. 300 MM
WORKPIECE LENGTH - MAX.: 400 MM
TRAVEL -X AXIS: 280 MM
FEED IN X - AXIS: 0,1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
TRAVEL -Z AXIS: 1.150 MM
WORK STROKE: Z: 500 MM
FEED IN Z-AXIS: 0,1 - 60.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 60,00 M/MIN
SPINDLE BEARING DIAMETER: 90 MM
SPINDLE HEAD DIN55026 - SIZE: A6
TURNING SPEED RANGE - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 23,00 KW
POWER CAPACITY AT 100 % LOAD: 18,10 KW
TOOL TURRET: 12-FACH
TOOL TAPER: CAPTO C4
TAILSTOCK TRAVEL: W1: 298 MM
TAILSTOCK QUILL TAPER MT: 4
STEADY STROKE: W3: 118 MM
PASSAGE OF STEADYREST: 10 - 70 MM
TOTAL POWER REQUIREMENT: 45,00 KW
WEIGHT OF THE MACHINE CA.: 11,00 T
DIMENSIONS OF THE MACHINE CA.: 7,00 X 5,00 X H3,20 M M
CNC LATHE WITH SIEMENS SINUMERIK 840D CONTROL, SCREW CONVEYOR
WITH CHIP BREAKER AND RETURN PUMPING STATION, NC-STEADY SMW-SLU-1-OLD Ø10-70MM,
12-FOLD TOOL TURRET SAUTER 0.5.460.220, NC TAILSTOCK, ARTIS MONITORING,
PIKUP-LOADING INCL. CONVEYOR.
WITHOUT COOLANT SYSTEM, WAS CONNECTED TO CENTRAL SUPPLY.
MACHINE CAN BE INSPECTED UNDER POWER.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-salt sand spreader weisser stasl w15h, unimog, truck, carrier etc. with municipal hydraulic attachment device. content 1.5 m. equipment: planning retractable roof, lashing chains. weight approx. 330 kg. with vpad controller control type sl with gps module (vpad software from 1.14), and documentation. 

more spreading technology, snow and winter service equipment available!  SALT SAND SPREADER WEISSER STASL W15H, UNIMOG, TRUCK, CARRIER ETC. WITH MUNICIPAL HYDRAULIC ATTACHMENT DEVICE. CONTENT 1.5 M. EQUIPMENT: PLANNING RETRACTABLE ROOF, LASHING CHAINS. WEIGHT APPROX. 330 KG. WITH VPAD CONTROLLER CONTROL TYPE SL WITH GPS MODULE (VPAD SOFTWARE FROM 1.14), AND DOCUMENTATION. MORE SPREADING TECHNOLOGY, SNOW AND WINTER SERVICE EQUIPMENT AVAILABLE!
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning length: 400 mm<br/>control: siemens 840d <br/>swing diameter: max. 300 mm<br/>workpiece length - max.: 400 mm<br/>travel -x axis: 280 mm<br/>feed in x - axis: 0,1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>travel -z axis: 1400 mm<br/>work stroke: z: 500 mm<br/>feed in z-axis: 0,1 - 60.000 mm/min<br/>rapid traverse z-axis: 60,00 m/min<br/>spindle bearing diameter: 90 mm<br/>spindle head din55026 - size: a6 <br/>turning speed range - stepless: 1 - 4500 u/min<br/>power capacity at 40 % load: 23,00 kw<br/>power capacity at 100 % load: 18,10 kw<br/>tool turret: 12 <br/>tool taper:  <br/>tailstock quill taper mt: 4 <br/>tailstock travel: 1000 mm<br/>total power requirement: 45,00 kw<br/>weight of the machine ca.: 11,00 t<br/>dimensions of the machine ca.: 7,00 x 5,00 x h3,20 m m<br/>- cnc control siemens 840d<br/>- loading system<br/>- chip conveyor<br/>- nc tailstock<br/>- tool-turret sauter with 12 stations<br/>- motor-spindle<br/>- machine was used for hard turning<br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
TURNING LENGTH: 400 MM
CONTROL: SIEMENS 840D
SWING DIAMETER: MAX. 300 MM
WORKPIECE LENGTH - MAX.: 400 MM
TRAVEL -X AXIS: 280 MM
FEED IN X - AXIS: 0,1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
TRAVEL -Z AXIS: 1400 MM
WORK STROKE: Z: 500 MM
FEED IN Z-AXIS: 0,1 - 60.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 60,00 M/MIN
SPINDLE BEARING DIAMETER: 90 MM
SPINDLE HEAD DIN55026 - SIZE: A6
TURNING SPEED RANGE - STEPLESS: 1 - 4500 U/MIN
POWER CAPACITY AT 40 % LOAD: 23,00 KW
POWER CAPACITY AT 100 % LOAD: 18,10 KW
TOOL TURRET: 12
TOOL TAPER:
TAILSTOCK QUILL TAPER MT: 4
TAILSTOCK TRAVEL: 1000 MM
TOTAL POWER REQUIREMENT: 45,00 KW
WEIGHT OF THE MACHINE CA.: 11,00 T
DIMENSIONS OF THE MACHINE CA.: 7,00 X 5,00 X H3,20 M M
- CNC CONTROL SIEMENS 840D
- LOADING SYSTEM
- CHIP CONVEYOR
- NC TAILSTOCK
- TOOL-TURRET SAUTER WITH 12 STATIONS
- MOTOR-SPINDLE
- MACHINE WAS USED FOR HARD TURNING




Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Ubicación: Land-gritter küpper weisser sta 95 w20 b, attachment device for unimog, truck etc. driven by b & s petrol engine. content 2.0 m. equipment: without plan retractable roof. weight 800 kg. not functional, corrosion, engine goes on strike - unaudited.
with controller and documentary.

more spreaders and winter maintenance technology stock!

-jacobis local, environmental & green care technology-
pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...  GRITTER KüPPER WEISSER STA 95 W20 B, ATTACHMENT DEVICE FOR UNIMOG, TRUCK ETC. DRIVEN BY B & S PETROL ENGINE. CONTENT 2.0 M. EQUIPMENT: WITHOUT PLAN RETRACTABLE ROOF. WEIGHT 800 KG. NOT FUNCTIONAL, CORROSION, ENGINE GOES ON STRIKE - UNAUDITED. WITH CONTROLLER AND DOCUMENTARY. MORE SPREADERS AND WINTER MAINTENANCE TECHNOLOGY STOCK! -JACOBIS LOCAL, ENVIRONMENTAL & GREEN CARE TECHNOLOGY- PRE-OWNED EQUIPMENT & SPORTS SQUARE CARE, GARDEN & LANDSCAPE CONSTRUCTION, CEMETERY TECHNOLOGY & WINTER MAINTENANCE, REVERSING OPERATIONS & DECOMMISSIONING, ENVIRONMENTAL CARE, MOTORS AND MORE...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>turning length: 400 mm<br/>control: siemens 840d <br/>swing diameter: max. 300 mm<br/>workpiece length - max.: 400 mm<br/>travel -x axis: 280 mm<br/>feed in x - axis: 0,1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>travel -z axis: 1400 mm<br/>work stroke: z: 500 mm<br/>feed in z-axis: 0,1 - 60.000 mm/min<br/>rapid traverse z-axis: 60,00 m/min<br/>spindle bearing diameter: 90 mm<br/>spindle head din55026 - size: a6 <br/>turning speed range - stepless: 1 - 4500 u/min<br/>power capacity at 40 % load: 23,00 kw<br/>power capacity at 100 % load: 18,10 kw<br/>tool turret: 12 <br/>tool taper:  <br/>tailstock quill taper mt: 4 <br/>tailstock travel: 1000 mm<br/>total power requirement: 45,00 kw<br/>weight of the machine ca.: 11,00 t<br/>dimensions of the machine ca.: 7,00 x 5,00 x h3,20 m m<br/>- cnc control siemens 840d<br/>- loading system<br/>- chip conveyor<br/>- nc tailstock<br/>- tool-turret sauter with 12 stations<br/>- motor-spindle<br/>- machine was used for hard turning<br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
TURNING LENGTH: 400 MM
CONTROL: SIEMENS 840D
SWING DIAMETER: MAX. 300 MM
WORKPIECE LENGTH - MAX.: 400 MM
TRAVEL -X AXIS: 280 MM
FEED IN X - AXIS: 0,1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
TRAVEL -Z AXIS: 1400 MM
WORK STROKE: Z: 500 MM
FEED IN Z-AXIS: 0,1 - 60.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 60,00 M/MIN
SPINDLE BEARING DIAMETER: 90 MM
SPINDLE HEAD DIN55026 - SIZE: A6
TURNING SPEED RANGE - STEPLESS: 1 - 4500 U/MIN
POWER CAPACITY AT 40 % LOAD: 23,00 KW
POWER CAPACITY AT 100 % LOAD: 18,10 KW
TOOL TURRET: 12
TOOL TAPER:
TAILSTOCK QUILL TAPER MT: 4
TAILSTOCK TRAVEL: 1000 MM
TOTAL POWER REQUIREMENT: 45,00 KW
WEIGHT OF THE MACHINE CA.: 11,00 T
DIMENSIONS OF THE MACHINE CA.: 7,00 X 5,00 X H3,20 M M
- CNC CONTROL SIEMENS 840D
- LOADING SYSTEM
- CHIP CONVEYOR
- NC TAILSTOCK
- TOOL-TURRET SAUTER WITH 12 STATIONS
- MOTOR-SPINDLE
- MACHINE WAS USED FOR HARD TURNING




Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Ubicación: Land-diffuser attachment of küpper weisser stasl w15h, attachment device for unimog, truck etc. with municipal hydraulic. content 1.5 m³. equipment: plan folding roof. weight approx. 330 kg. with controller, and documentation.

parking jacks adjustable in height (per 1200 kg load or other) optionally available

more top spreader from 1.2 to 7 m, cubic content, even with moist salt facility
stray followers, three point mounted spreaders etc. - stock, see photos!  DIFFUSER ATTACHMENT OF KüPPER WEISSER STASL W15H, ATTACHMENT DEVICE FOR UNIMOG, TRUCK ETC. WITH MUNICIPAL HYDRAULIC. CONTENT 1.5 M³. EQUIPMENT: PLAN FOLDING ROOF. WEIGHT APPROX. 330 KG. WITH CONTROLLER, AND DOCUMENTATION. PARKING JACKS ADJUSTABLE IN HEIGHT (PER 1200 KG LOAD OR OTHER) OPTIONALLY AVAILABLE MORE TOP SPREADER FROM 1.2 TO 7 M, CUBIC CONTENT, EVEN WITH MOIST SALT FACILITY STRAY FOLLOWERS, THREE POINT MOUNTED SPREADERS ETC. - STOCK, SEE PHOTOS!
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 440 mm<br/>turning diameter over slide rest: 240 mm<br/>turning length: 2000 mm<br/>spindle turning speed range: 5,6 - 1120 u/min<br/>number of feeds: 40 <br/>longitudinal feeds:: 0,056 - 12,8 mm/u<br/>face feeds: 0,028 - 6,4 <br/>thread - mm pitch: 0,5 - 112 mm<br/>thread - module: 0,125 - 28 mm<br/>thread - inch: 1 -56 gang / inch.<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 3 t<br/>dimensions of the machine ca.: 3,5 x 1,2 x 1,5 m<br/>? fixed steady<br/>? cooling device<br/>? thread cutting automatic - gsa<br/><br/><br/><br/> TURNING DIAMETER OVER BED: 440 MM
TURNING DIAMETER OVER SLIDE REST: 240 MM
TURNING LENGTH: 2000 MM
SPINDLE TURNING SPEED RANGE: 5,6 - 1120 U/MIN
NUMBER OF FEEDS: 40
LONGITUDINAL FEEDS:: 0,056 - 12,8 MM/U
FACE FEEDS: 0,028 - 6,4
THREAD - MM PITCH: 0,5 - 112 MM
THREAD - MODULE: 0,125 - 28 MM
THREAD - INCH: 1 -56 GANG / INCH.
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 3 T
DIMENSIONS OF THE MACHINE CA.: 3,5 X 1,2 X 1,5 M
? FIXED STEADY
? COOLING DEVICE
? THREAD CUTTING AUTOMATIC - GSA



Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-top width 2000 mm
turning diameter over bed 600 mm
spindle bore about ã?80
bed width 430 mm
tailstock mk5
chuck diameter 315 mm
weight approx. 8to
92.
p2b9fy8n
control bosch cc220 (recently renewed) TOP WIDTH 2000 MM TURNING DIAMETER OVER BED 600 MM SPINDLE BORE ABOUT &ATILDE;?80 BED WIDTH 430 MM TAILSTOCK MK5 CHUCK DIAMETER 315 MM WEIGHT APPROX. 8TO 92. P2B9FY8N CONTROL BOSCH CC220 (RECENTLY RENEWED)
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-turning diameter: 475 mm<br/>turning length: 1000 mm<br/>control: siemens sinumerik 810 t <br/>turning dia. over face-slide: 260 mm<br/>centre height: 235 mm<br/>spindle bore: 63 mm<br/>turning speed range: 10 - 2250 u/min<br/>feeds: 0,001 - 50 mm/u<br/>rapid traverse x-axis: 5 m/min<br/>rapid traverse z-axis: 8 m/min<br/>bed width: 335 mm<br/>tailstock quill diameter: 80 mm<br/>tailstock quill stroke: 150 mm<br/>workpiece weight: max. 750 kg<br/>face slide travel: 300 mm<br/>tailstock taper mt: 5 <br/>weight of the machine ca.: 3,0 t<br/>dimensions of the machine ca.: 5,00 x 3,00 x 1,70 m<br/>acc.: 3-jaw chuck 250 mm, faceplate 500 mm, steady, changing toolholder with various inserts, coolant<br/><br/><br/><br/> TURNING DIAMETER: 475 MM
TURNING LENGTH: 1000 MM
CONTROL: SIEMENS SINUMERIK 810 T
TURNING DIA. OVER FACE-SLIDE: 260 MM
CENTRE HEIGHT: 235 MM
SPINDLE BORE: 63 MM
TURNING SPEED RANGE: 10 - 2250 U/MIN
FEEDS: 0,001 - 50 MM/U
RAPID TRAVERSE X-AXIS: 5 M/MIN
RAPID TRAVERSE Z-AXIS: 8 M/MIN
BED WIDTH: 335 MM
TAILSTOCK QUILL DIAMETER: 80 MM
TAILSTOCK QUILL STROKE: 150 MM
WORKPIECE WEIGHT: MAX. 750 KG
FACE SLIDE TRAVEL: 300 MM
TAILSTOCK TAPER MT: 5
WEIGHT OF THE MACHINE CA.: 3,0 T
DIMENSIONS OF THE MACHINE CA.: 5,00 X 3,00 X 1,70 M
ACC.: 3-JAW CHUCK 250 MM, FACEPLATE 500 MM, STEADY, CHANGING TOOLHOLDER WITH VARIOUS INSERTS, COOLANT



Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-lathe and various small parts

manufacturer: eugene of white
type: dlne
year of construction: 1954

top width: 2000 mm
bed width: 380 mm
bed length: 3410 mm
outer dimensions: 3,850 x 1,020 x 1.135 mm
net weight: approx. 2500 kg

maximum speed: 935 rpm
maximum speed faceplate: 710 rpm

tour is possible upon request.

LATHE AND VARIOUS SMALL PARTS MANUFACTURER: EUGENE OF WHITE TYPE: DLNE YEAR OF CONSTRUCTION: 1954 TOP WIDTH: 2000 MM BED WIDTH: 380 MM BED LENGTH: 3410 MM OUTER DIMENSIONS: 3,850 X 1,020 X 1.135 MM NET WEIGHT: APPROX. 2500 KG MAXIMUM SPEED: 935 RPM MAXIMUM SPEED FACEPLATE: 710 RPM TOUR IS POSSIBLE UPON REQUEST.
Vendedor: Karl Bachl GmbH & Co. KG
Año de construcción: usado
Precio: 89 €
Ubicación: Land-weight of the machine ca.: 435 gramm<br/>dimensions of the machine ca.: 110 x 90 x 9 kassette mm<br/>adjustable: din 9 - 13 din<br/><br/><br/><br/><br/> WEIGHT OF THE MACHINE CA.: 435 GRAMM
DIMENSIONS OF THE MACHINE CA.: 110 X 90 X 9 KASSETTE MM
ADJUSTABLE: DIN 9 - 13 DIN




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-used weisser univertor as 90 l cnc pick up lathe

high-productivity shaft pick-up lathe for large-scale production.
cnc control siemens 840d
technical specifications.
rotating diameter 250 mm
turning length 400 mm
circulation diameter max. 300 mm
workpiece length - max. 400 mm
feed range x - direction 0.1 - 30.000 mm / min
rapid traverse x-axis 30.00 m / min
working stroke z: 500 mm
feed range z - direction 0.1 - 60.000 mm / min
rapid travel z axis 60.00 m / min
spindellager diameter 90 mm
tool turret 12x
tool holder vdi 40
further data
x1 axis (210 to -30 mm) 30 m / min
z1 axis (1302 to 172mm) 60m / min
spindle c1 30 - 3800 u / min
w1 axis (608 to 308 mm) 20 m / min
tailstock
dimensions 4000 x 2200 x 2500 mm USED WEISSER UNIVERTOR AS 90 L CNC PICK UP LATHE HIGH-PRODUCTIVITY SHAFT PICK-UP LATHE FOR LARGE-SCALE PRODUCTION. CNC CONTROL SIEMENS 840D TECHNICAL SPECIFICATIONS. ROTATING DIAMETER 250 MM TURNING LENGTH 400 MM CIRCULATION DIAMETER MAX. 300 MM WORKPIECE LENGTH - MAX. 400 MM FEED RANGE X - DIRECTION 0.1 - 30.000 MM / MIN RAPID TRAVERSE X-AXIS 30.00 M / MIN WORKING STROKE Z: 500 MM FEED RANGE Z - DIRECTION 0.1 - 60.000 MM / MIN RAPID TRAVEL Z AXIS 60.00 M / MIN SPINDELLAGER DIAMETER 90 MM TOOL TURRET 12X TOOL HOLDER VDI 40 FURTHER DATA X1 AXIS (210 TO -30 MM) 30 M / MIN Z1 AXIS (1302 TO 172MM) 60M / MIN SPINDLE C1 30 - 3800 U / MIN W1 AXIS (608 TO 308 MM) 20 M / MIN TAILSTOCK DIMENSIONS 4000 X 2200 X 2500 MM
Vendedor: Asset-Trade - Bewertung & Vermarktung
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-DE Germany, 37120 Bovenden
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-guide and spindle lathe white heilbronn "hector"

2-axis digital display heidenhain
year of construction: 1979
spindle bore: 61 mm
centre distance: 1500 mm
o bed circulation: 390 mm
speed range: 22-1120 rpm

with the following accessories:
multifix tool holder with various inserts
coolant system
3 jaw chuck 0 400 mm
face plate 0 560 mm
running with lynette 0 approx. 180 mm
running with lynette 0 approx. 280 mm
fixed lynette
various tools, etc.
operating instructions GUIDE AND SPINDLE LATHE WHITE HEILBRONN "HECTOR" 2-AXIS DIGITAL DISPLAY HEIDENHAIN YEAR OF CONSTRUCTION: 1979 SPINDLE BORE: 61 MM CENTRE DISTANCE: 1500 MM O BED CIRCULATION: 390 MM SPEED RANGE: 22-1120 RPM WITH THE FOLLOWING ACCESSORIES: MULTIFIX TOOL HOLDER WITH VARIOUS INSERTS COOLANT SYSTEM 3 JAW CHUCK 0 400 MM FACE PLATE 0 560 MM RUNNING WITH LYNETTE 0 APPROX. 180 MM RUNNING WITH LYNETTE 0 APPROX. 280 MM FIXED LYNETTE VARIOUS TOOLS, ETC. OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-DE Germany, 37120 Bovenden
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-article no. 500-992
cnc lathe
make: white
type: senior cnc 400
year of construction: 1995
control: siemens 820 t
faceplate 560 mm
chip conveyor
tailstock
cooling water pump
tool holders
technical details:
turning diameter over bed 815 mm
turning length 2500 mm
spindle bore 105 mm
speed range 22.4-1120 rpm.
total power 22 kw
space: 6000 x 2400 x 1800 m
machine weight approx. 8 t ARTICLE NO. 500-992 CNC LATHE MAKE: WHITE TYPE: SENIOR CNC 400 YEAR OF CONSTRUCTION: 1995 CONTROL: SIEMENS 820 T FACEPLATE 560 MM CHIP CONVEYOR TAILSTOCK COOLING WATER PUMP TOOL HOLDERS TECHNICAL DETAILS: TURNING DIAMETER OVER BED 815 MM TURNING LENGTH 2500 MM SPINDLE BORE 105 MM SPEED RANGE 22.4-1120 RPM. TOTAL POWER 22 KW SPACE: 6000 X 2400 X 1800 M MACHINE WEIGHT APPROX. 8 T
Vendedor: Santos Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-t-drill t 150:-colar trimming-t-tube upforming-tube extrudingmax Ø 168 mm x 6,3 m (6 x 0.250)much tooling included T-DRILL T 150:-COLAR TRIMMING-T-TUBE UPFORMING-TUBE EXTRUDINGMAX Ø 168 MM X 6,3 M (6 X 0.250)MUCH TOOLING INCLUDED
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-see photo notes: list SEE PHOTO NOTES: LIST
Vendedor: SENER MASCHINEN
Año de construcción: usado
Ubicación: Land-tip height: 300 mm top width: 1200 mm circular diameter: bed 600 mm spindle bore: 61 mm spindle retainer: gr. 8 taper tailstock: 5 mk spindle speed: 22.4-1120 rpm feeds: longitudinal/plan 0.056 0.8/0.028 0.4 mm / u thread pitches: 0.5-112 mm electrical connection: 380 v, 7.5 kw space: 2920 x 1400 x 1570 mm weight: 3450 kg 
 TIP HEIGHT: 300 MM TOP WIDTH: 1200 MM CIRCULAR DIAMETER: BED 600 MM SPINDLE BORE: 61 MM SPINDLE RETAINER: GR. 8 TAPER TAILSTOCK: 5 MK SPINDLE SPEED: 22.4-1120 RPM FEEDS: LONGITUDINAL/PLAN 0.056 0.8/0.028 0.4 MM / U THREAD PITCHES: 0.5-112 MM ELECTRICAL CONNECTION: 380 V, 7.5 KW SPACE: 2920 X 1400 X 1570 MM WEIGHT: 3450 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-patterned küpper weisser spreading equipment we offer: axle, hydraulic pump, hydraulic motor of the worm drive, brine tanks, brine pump, spreading disc and drive.,.
worm or conveyor spiral, plan folding roof, remote control, control electronics, electrical
solenoid valves etc.

more info and prices on request.

other parts of other spreaders are available, such as hydraulic unit powered by hatz diesel engine. we offer used winter maintenance technology from a to... PATTERNED K&UUML;PPER WEISSER SPREADING EQUIPMENT WE OFFER: AXLE, HYDRAULIC PUMP, HYDRAULIC MOTOR OF THE WORM DRIVE, BRINE TANKS, BRINE PUMP, SPREADING DISC AND DRIVE.,. WORM OR CONVEYOR SPIRAL, PLAN FOLDING ROOF, REMOTE CONTROL, CONTROL ELECTRONICS, ELECTRICAL SOLENOID VALVES ETC. MORE INFO AND PRICES ON REQUEST. OTHER PARTS OF OTHER SPREADERS ARE AVAILABLE, SUCH AS HYDRAULIC UNIT POWERED BY HATZ DIESEL ENGINE. WE OFFER USED WINTER MAINTENANCE TECHNOLOGY FROM A TO...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-ex on slope streuer of küpper weisser sta we offer 1t65fsv07: axle, hydraulic pump, hydraulic motor of the worm drive, brine tanks, brine pump, spreading disc and drive.,.
worm or conveyor spiral, plan folding roof, remote control, control electronics, electrical
solenoid valves etc.

more info and prices on request.

other parts of other spreaders are available, such as hydraulic unit powered by hatz diesel engine. EX ON SLOPE STREUER OF K&UUML;PPER WEISSER STA WE OFFER 1T65FSV07: AXLE, HYDRAULIC PUMP, HYDRAULIC MOTOR OF THE WORM DRIVE, BRINE TANKS, BRINE PUMP, SPREADING DISC AND DRIVE.,. WORM OR CONVEYOR SPIRAL, PLAN FOLDING ROOF, REMOTE CONTROL, CONTROL ELECTRONICS, ELECTRICAL SOLENOID VALVES ETC. MORE INFO AND PRICES ON REQUEST. OTHER PARTS OF OTHER SPREADERS ARE AVAILABLE, SUCH AS HYDRAULIC UNIT POWERED BY HATZ DIESEL ENGINE.
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-gebr. cnc vert. &amp;gt; lathe with siemens 840 d control
weight: 11 t
1998
missing a drive module card GEBR. CNC VERT. &AMP;GT; LATHE WITH SIEMENS 840 D CONTROL WEIGHT: 11 T 1998 MISSING A DRIVE MODULE CARD
Vendedor: SENER MASCHINEN
Año de construcción: usado
Ubicación: Land-de Germany, 24941 Flensburg
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-de Germany, 24941 Flensburg
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-control desk to sta hd (h90 fs) suitably.
 CONTROL DESK TO STA HD (H90 FS) SUITABLY.
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-e.g., snails impulse gear, streutellerantriebe, control consoles, achsantrieb, hydraulic pump, folding roofs etc. from shaker year of construction 90-94. E.G., SNAILS IMPULSE GEAR, STREUTELLERANTRIEBE, CONTROL CONSOLES, ACHSANTRIEB, HYDRAULIC PUMP, FOLDING ROOFS ETC. FROM SHAKER YEAR OF CONSTRUCTION 90-94.
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-1 used waves-impulse unity consisting of hydraulic engine and gear
 type 4304.01.09900.00-, s/n 360957, kw 7.00, md? 00725, i = 5.00:1, n1=500, gear oil 0.25 ltr., from 4 m? shaker sta hd .
 desweiteren are also available streutellermotor, litter plate, tax box as well as remote control, cable etc. 1 USED WAVES-IMPULSE UNITY CONSISTING OF HYDRAULIC ENGINE AND GEAR TYPE 4304.01.09900.00-, S/N 360957, KW 7.00, MD? 00725, I = 5.00:1, N1=500, GEAR OIL 0.25 LTR., FROM 4 M? SHAKER STA HD . DESWEITEREN ARE ALSO AVAILABLE STREUTELLERMOTOR, LITTER PLATE, TAX BOX AS WELL AS REMOTE CONTROL, CABLE ETC.
Vendedor: JODAU - Kommunaltechnik
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)