732 ofertas

Año de construcción: usado
Ubicación: Land-semi-mobile batching plant type gromix m brs, capacity approx. 50 cbm/h, sicoma planet mixer, 4 fold series silo plant per 25 cbm per box, tape loading to the mixer, plc control system on windows based completely in a container installed, heating/hot water in the container

mistakes and intermediate sale reserve, sales from site SEMI-MOBILE BATCHING PLANT TYPE GROMIX M BRS, CAPACITY APPROX. 50 CBM/H, SICOMA PLANET MIXER, 4 FOLD SERIES SILO PLANT PER 25 CBM PER BOX, TAPE LOADING TO THE MIXER, PLC CONTROL SYSTEM ON WINDOWS BASED COMPLETELY IN A CONTAINER INSTALLED, HEATING/HOT WATER IN THE CONTAINER MISTAKES AND INTERMEDIATE SALE RESERVE, SALES FROM SITE
Vendedor: GROMITEC
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-; accessories: leistung (brief):57, bereifung (v):405/70-20, bereifung (h):405/70-20, allrad, kabine, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3000 ; ACCESSORIES: LEISTUNG (BRIEF):57, BEREIFUNG (V):405/70-20, BEREIFUNG (H):405/70-20, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-schlafhorst aco288 piecers, 8 available, good condition SCHLAFHORST ACO288 PIECERS, 8 AVAILABLE, GOOD CONDITION
Vendedor: Immtex, llc
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-used stainless steel transport containers / pressure vessels

last purpose: food

volume: 1000l
type: standing on four feet with forklifts tunnel
material (media contact): 1.4301 / aisi304
design: single-walled
floor: arched
top shelf: arched
working pressure according to the rating plate: - 0.15 / + 1, 0 bar

dimensions tank:

container diameter: 980 mm
cyl. height: 1010mm
distance from drain to floor: 180 mm
total height: 1800 mm

materials:

inside: 1.4301 / aisi 304
outside: 1.4301 / aisi 304

facilities:

plate: yes
dome cover 㸠400 mm
diameter outlet: dn65
outlet type: din11851
outlet valve: valve

USED STAINLESS STEEL TRANSPORT CONTAINERS / PRESSURE VESSELS LAST PURPOSE: FOOD VOLUME: 1000L TYPE: STANDING ON FOUR FEET WITH FORKLIFTS TUNNEL MATERIAL (MEDIA CONTACT): 1.4301 / AISI304 DESIGN: SINGLE-WALLED FLOOR: ARCHED TOP SHELF: ARCHED WORKING PRESSURE ACCORDING TO THE RATING PLATE: - 0.15 / + 1, 0 BAR DIMENSIONS TANK: CONTAINER DIAMETER: 980 MM CYL. HEIGHT: 1010MM DISTANCE FROM DRAIN TO FLOOR: 180 MM TOTAL HEIGHT: 1800 MM MATERIALS: INSIDE: 1.4301 / AISI 304 OUTSIDE: 1.4301 / AISI 304 FACILITIES: PLATE: YES DOME COVER ø 400 MM DIAMETER OUTLET: DN65 OUTLET TYPE: DIN11851 OUTLET VALVE: VALVE
Vendedor: Inox Behälter GmbH
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-; accessories: bordcomputer / monitor; working width [cm]: 2100 ; ACCESSORIES: BORDCOMPUTER / MONITOR; WORKING WIDTH [CM]: 2100
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-decoiler and straightening machine
manufacturer kingjime, china

material width 900 mm

material thickness 0.5 0. 8 mm

coil inside diameter 508mm

coil outer diameter 1500 mm
speed 20 m / min

drive motor directional system 5.5 kw

unwinding motor 2,2kw

year 2013

the offer is lookman exclusively to traders within the meaning of ⧠14 bgb
 DECOILER AND STRAIGHTENING MACHINE MANUFACTURER KINGJIME, CHINA MATERIAL WIDTH 900 MM MATERIAL THICKNESS 0.5 0. 8 MM COIL INSIDE DIAMETER 508MM COIL OUTER DIAMETER 1500 MM SPEED 20 M / MIN DRIVE MOTOR DIRECTIONAL SYSTEM 5.5 KW UNWINDING MOTOR 2,2KW YEAR 2013 THE OFFER IS LOOKMAN EXCLUSIVELY TO TRADERS WITHIN THE MEANING OF § 14 BGB
Vendedor: Jens Kürschner Maschinenhandel
Año de construcción: usado
Ubicación: Land-window processing line, cnc window production line, window angle system<br /><br />-double end tenoner, make gubisch, type dst h<br />-bj. 1994, ser. 7593<br />-2x 2 tool towers a 5 heads<br />-built tools from leitz<br />-wellenaufnahme Ø 50<br />-max tool Ø 350 mm<br />-max tool height 650 mm<br />-4x milling motors 11 kw 2800 rpm<br />-control, fabr. gubisch<br />-roller conveyor, l / w 4,000 x 200 mm<br />-milling machine, make gubisch, type fn2000<br />-bj. 1994, ser. 7490<br />-4 milling shafts<br />-4x milling motors 9.2 kw 2800 rpm<br />-tools from leitz<br />-wellen recording ca Ø 40<br />-max tool Ø 230 mm<br />-max tool height 350 mm<br />-m. feed roller conveyor, l / b 4,500 x 150 mm<br />-roller conveyor, l / w 4,000 x 200 mm<br />-tool cabinet<br />-schalt- / fuse box WINDOW PROCESSING LINE, CNC WINDOW PRODUCTION LINE, WINDOW ANGLE SYSTEM

-DOUBLE END TENONER, MAKE GUBISCH, TYPE DST H
-BJ. 1994, SER. 7593
-2X 2 TOOL TOWERS A 5 HEADS
-BUILT TOOLS FROM LEITZ
-WELLENAUFNAHME Ø 50
-MAX TOOL Ø 350 MM
-MAX TOOL HEIGHT 650 MM
-4X MILLING MOTORS 11 KW 2800 RPM
-CONTROL, FABR. GUBISCH
-ROLLER CONVEYOR, L / W 4,000 X 200 MM
-MILLING MACHINE, MAKE GUBISCH, TYPE FN2000
-BJ. 1994, SER. 7490
-4 MILLING SHAFTS
-4X MILLING MOTORS 9.2 KW 2800 RPM
-TOOLS FROM LEITZ
-WELLEN RECORDING CA Ø 40
-MAX TOOL Ø 230 MM
-MAX TOOL HEIGHT 350 MM
-M. FEED ROLLER CONVEYOR, L / B 4,500 X 150 MM
-ROLLER CONVEYOR, L / W 4,000 X 200 MM
-TOOL CABINET
-SCHALT- / FUSE BOX
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-door band drill
sma ref 6412
category: metal window construction drills
manufacturer: elumatec
type: tbm 126
year of construction: 1997
work area: workpiece length: 3,000 mm
wing width: 108 mm
frame width: 200 mm max
condition:
ready for use
under current
location: north rhine-westphalia
dimensions: weight: 350 kg
availability: immediately DOOR BAND DRILL SMA REF 6412 CATEGORY: METAL WINDOW CONSTRUCTION DRILLS MANUFACTURER: ELUMATEC TYPE: TBM 126 YEAR OF CONSTRUCTION: 1997 WORK AREA: WORKPIECE LENGTH: 3,000 MM WING WIDTH: 108 MM FRAME WIDTH: 200 MM MAX CONDITION: READY FOR USE UNDER CURRENT LOCATION: NORTH RHINE-WESTPHALIA DIMENSIONS: WEIGHT: 350 KG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-tunnel width 550,-high 200,-length 1250 mm\r\n\r\n\r\ncategory: bakery machine tunnel tube\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new TUNNEL WIDTH 550,-HIGH 200,-LENGTH 1250 MM\R\N\R\N\R\NCATEGORY: BAKERY MACHINE TUNNEL TUBE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-2-spindle copy milling machine
sma-ref-6411
category: metal window construction machines
manufacturer: elumatec
type: kf 78 / 60
year of construction: 1992
spindle: 1 vertical milling motor
1 horizontal milling motor
6,000 / 12,000 rev/min
condition: ready to use
under current
location: north rhine-westphalia
dimensions: weight: 230 kg
availability: immediately 2-SPINDLE COPY MILLING MACHINE SMA-REF-6411 CATEGORY: METAL WINDOW CONSTRUCTION MACHINES MANUFACTURER: ELUMATEC TYPE: KF 78 / 60 YEAR OF CONSTRUCTION: 1992 SPINDLE: 1 VERTICAL MILLING MOTOR 1 HORIZONTAL MILLING MOTOR 6,000 / 12,000 REV/MIN CONDITION: READY TO USE UNDER CURRENT LOCATION: NORTH RHINE-WESTPHALIA DIMENSIONS: WEIGHT: 230 KG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-stainless steel\r\nwidth 2800 mm, length/depth  1300, height 500 mm\r\n\r\n\r\ncategory: bakery machines drain cape extraction hood suction hood stainless steel\r\nsales of bakery machine used machines bakery resolution food machine reconditioned condition as it is new STAINLESS STEEL\R\NWIDTH 2800 MM, LENGTH/DEPTH 1300, HEIGHT 500 MM\R\N\R\N\R\NCATEGORY: BAKERY MACHINES DRAIN CAPE EXTRACTION HOOD SUCTION HOOD STAINLESS STEEL\R\NSALES OF BAKERY MACHINE USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-window manufacturing facility vinous type unicontrol 10, technical specifications on request. WINDOW MANUFACTURING FACILITY VINOUS TYPE UNICONTROL 10, TECHNICAL SPECIFICATIONS ON REQUEST.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Ubicación: Land--8 color geared press with 5mm pitch
-quick sleeve and anilox changed from the side
-avt print vision jupiter (new in 2009 / 120,000 euros)
-avt's jupiter provides a comprehensive process control and automatic defect detection solution.
-automatic viscosity control
-
bst web guide, infeed
bst web guide outfeed
-
web widht: 1270 mm
print width: 1220 mm
repeat length: 350-850 mm
plate thickness: 2.54mm
mechanical speed: 300 m / min.
printing speed: 300 m / min.
system: geared press, pitch 5mm

printing group positionning: electric
side positionning electric
-

anilox roller sleeve side loading
printing cylinder sleeve with side loading
-
material paper: 20-125 gr ldpe: 25-150 µ opp: 12-40 µ pet: 12-30 µ /.
strip tension á?¸-1 dan =
-
unwinder type: non-stop
unwinder max reel diameter: 800 mm
core diameter 2 x 76 mm - 2 x 152 mm
-
rewinder type: non-stop
core diameter: 2 x 76 mm
rewinder reel diameter 800 mm-
drying system gas - 2 burners
between colors and drying tunnel
8 x pneumatic ink pumps
9 x chamber doctor blades
inline slitting:
4 knives. including suction for the edges

-list of printing sleeves and air mandrels

sleeves and gears:
8 x 370,380,400,420,440,460,500,6oo,620 mm 4 x 480 mm 6 x 635,650,670 mm

list of anilox or anilox mandrels

anilox sleeves = 5 x 280 l / 2 x 220 l, 2 x 160 l, 2 x 140 l & 1 x 80 l

 -8 COLOR GEARED PRESS WITH 5MM PITCH -QUICK SLEEVE AND ANILOX CHANGED FROM THE SIDE -AVT PRINT VISION JUPITER (NEW IN 2009 / 120,000 EUROS) -AVT'S JUPITER PROVIDES A COMPREHENSIVE PROCESS CONTROL AND AUTOMATIC DEFECT DETECTION SOLUTION. -AUTOMATIC VISCOSITY CONTROL - BST WEB GUIDE, INFEED BST WEB GUIDE OUTFEED - WEB WIDHT: 1270 MM PRINT WIDTH: 1220 MM REPEAT LENGTH: 350-850 MM PLATE THICKNESS: 2.54MM MECHANICAL SPEED: 300 M / MIN. PRINTING SPEED: 300 M / MIN. SYSTEM: GEARED PRESS, PITCH 5MM PRINTING GROUP POSITIONNING: ELECTRIC SIDE POSITIONNING ELECTRIC - ANILOX ROLLER SLEEVE SIDE LOADING PRINTING CYLINDER SLEEVE WITH SIDE LOADING - MATERIAL PAPER: 20-125 GR LDPE: 25-150 µ OPP: 12-40 µ PET: 12-30 µ /. STRIP TENSION �-1 DAN = - UNWINDER TYPE: NON-STOP UNWINDER MAX REEL DIAMETER: 800 MM CORE DIAMETER 2 X 76 MM - 2 X 152 MM - REWINDER TYPE: NON-STOP CORE DIAMETER: 2 X 76 MM REWINDER REEL DIAMETER 800 MM- DRYING SYSTEM GAS - 2 BURNERS BETWEEN COLORS AND DRYING TUNNEL 8 X PNEUMATIC INK PUMPS 9 X CHAMBER DOCTOR BLADES INLINE SLITTING: 4 KNIVES. INCLUDING SUCTION FOR THE EDGES -LIST OF PRINTING SLEEVES AND AIR MANDRELS SLEEVES AND GEARS: 8 X 370,380,400,420,440,460,500,6OO,620 MM 4 X 480 MM 6 X 635,650,670 MM LIST OF ANILOX OR ANILOX MANDRELS ANILOX SLEEVES = 5 X 280 L / 2 X 220 L, 2 X 160 L, 2 X 140 L & 1 X 80 L
Vendedor: Serin Graphische Maschinen
Año de construcción: usado
Ubicación: Land-package width up to 450 mm, -height up to 180\r\nlength tunnel 1200 mm\r\n PACKAGE WIDTH UP TO 450 MM, -HEIGHT UP TO 180\R\NLENGTH TUNNEL 1200 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-horiz. film winder winding machine
sma-ref-6232
category: winder
manufacturer: fev
type: te 600
year of construction: 2005
foil: width: 80 mm
speed: 32-150 u/min
work area: product size:
up to 1,200 x 630 x 90 mm
special features: footswitch
winding head in 3 height adjustable
condition:
ready for use
under current
location: north rhine-westphalia
availability: immediately
terms of delivery: from site
terms of payment: 100% prior to removal/loading HORIZ. FILM WINDER WINDING MACHINE SMA-REF-6232 CATEGORY: WINDER MANUFACTURER: FEV TYPE: TE 600 YEAR OF CONSTRUCTION: 2005 FOIL: WIDTH: 80 MM SPEED: 32-150 U/MIN WORK AREA: PRODUCT SIZE: UP TO 1,200 X 630 X 90 MM SPECIAL FEATURES: FOOTSWITCH WINDING HEAD IN 3 HEIGHT ADJUSTABLE CONDITION: READY FOR USE UNDER CURRENT LOCATION: NORTH RHINE-WESTPHALIA AVAILABILITY: IMMEDIATELY TERMS OF DELIVERY: FROM SITE TERMS OF PAYMENT: 100% PRIOR TO REMOVAL/LOADING
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-overview technical data paper sorting line <br/>manufacturer bollegraaf<br/>year of construction 1999<br/>throughput rate 3 up to 6 tons/h, depending on material<br/>installation dimensions 10,000 x 19,000 x 8,000 mm (l x w x h)<br/>sorting cabin 6,500 x 4,900 x 3,150 mm (l x w x h), 4 sorting places, 6 disposal chutes, 4 bunker belts<br/><br/>1 piece feeding belt to the sorting line hbt 600-800 * 14.006 mm ? 30°<br/>1 piece sorting belt hbgt 800 * 15,000 mm ? 10° -0°<br/>4 pieces bunker belts hbt 800 /1,000 * 10,940 mm<br/><br/>comments: the sorting line was used for sorting paper fractions, but can also be used for various other sorting operations. the machines are in good condition and can be inspected at our warehouse.  further pictures and technical drawings are available on request.<br/> <br/>detailed information to the individual machines. <br/>technical data sorting cabin <br/>manufacturer bollegraaf<br/>equipment features 4 sorting places, 6 disposal chutes, 4 bunker belts<br/>assembly dimensions 6,500 x 4,900 x 3,150 mm (l x w x h)<br/>assembly area 72 m²<br/>construction modular construction with two doors and two rows of windows <br/>wall type sepalux 0-70-sp<br/>wall thickness 70 mm<br/>modul width 1,200 mm<br/> <br/>technical data feeding conveyor to the sorting belt, 1 piece <br/>manufacturer bollegraaf <br/>type hbt 600-800 * 14,006 mm 30°<br/>year of construction 1999<br/>driving motor 1,5 kw<br/>belt speed 1,5 up to 5,5 m/min. frequency-controlled<br/>length feeding conveyor 5,223 mm<br/>length elevating conveyor 8,783 mm<br/>grade 30°<br/>effecting width 800 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall elevating conv. 800 mm<br/>spacing / hight of carrier 800 mm / 50 mm<br/> <br/>technical data sorting belt, 1 piece <br/>manufacturer bollegraaf <br/>type hbgt 800 * 15,000 mm  10° / 0°<br/>year of construction 1999<br/>driving motor 5,5 kw<br/>belt speed 12 up to 44 m/min.  frequency-controlled<br/>length sorting conveyor 15,000 mm<br/>effecting width 800 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall sorting conv. 150 mm<br/> <br/>technical data bunker belts, 4 pieces <br/>manufacturer bollegraaf <br/>type hbt 800 /1,000 * 10,940 mm<br/>year of construction 1999<br/>driving motor 0,22 up to 0,9 kw<br/>belt speed 1 up to 4 m/min.  frequency-controlled<br/>length bunker conveyor 10,940 mm<br/>effecting width 800 mm<br/>height of side wall feeding conv. 2,000 mm OVERVIEW TECHNICAL DATA PAPER SORTING LINE
MANUFACTURER BOLLEGRAAF
YEAR OF CONSTRUCTION 1999
THROUGHPUT RATE 3 UP TO 6 TONS/H, DEPENDING ON MATERIAL
INSTALLATION DIMENSIONS 10,000 X 19,000 X 8,000 MM (L X W X H)
SORTING CABIN 6,500 X 4,900 X 3,150 MM (L X W X H), 4 SORTING PLACES, 6 DISPOSAL CHUTES, 4 BUNKER BELTS

1 PIECE FEEDING BELT TO THE SORTING LINE HBT 600-800 * 14.006 MM ? 30°
1 PIECE SORTING BELT HBGT 800 * 15,000 MM ? 10° -0°
4 PIECES BUNKER BELTS HBT 800 /1,000 * 10,940 MM

COMMENTS: THE SORTING LINE WAS USED FOR SORTING PAPER FRACTIONS, BUT CAN ALSO BE USED FOR VARIOUS OTHER SORTING OPERATIONS. THE MACHINES ARE IN GOOD CONDITION AND CAN BE INSPECTED AT OUR WAREHOUSE. FURTHER PICTURES AND TECHNICAL DRAWINGS ARE AVAILABLE ON REQUEST.

DETAILED INFORMATION TO THE INDIVIDUAL MACHINES.
TECHNICAL DATA SORTING CABIN
MANUFACTURER BOLLEGRAAF
EQUIPMENT FEATURES 4 SORTING PLACES, 6 DISPOSAL CHUTES, 4 BUNKER BELTS
ASSEMBLY DIMENSIONS 6,500 X 4,900 X 3,150 MM (L X W X H)
ASSEMBLY AREA 72 M²
CONSTRUCTION MODULAR CONSTRUCTION WITH TWO DOORS AND TWO ROWS OF WINDOWS
WALL TYPE SEPALUX 0-70-SP
WALL THICKNESS 70 MM
MODUL WIDTH 1,200 MM

TECHNICAL DATA FEEDING CONVEYOR TO THE SORTING BELT, 1 PIECE
MANUFACTURER BOLLEGRAAF
TYPE HBT 600-800 * 14,006 MM 30°
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 1,5 KW
BELT SPEED 1,5 UP TO 5,5 M/MIN. FREQUENCY-CONTROLLED
LENGTH FEEDING CONVEYOR 5,223 MM
LENGTH ELEVATING CONVEYOR 8,783 MM
GRADE 30°
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
SPACING / HIGHT OF CARRIER 800 MM / 50 MM

TECHNICAL DATA SORTING BELT, 1 PIECE
MANUFACTURER BOLLEGRAAF
TYPE HBGT 800 * 15,000 MM 10° / 0°
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 5,5 KW
BELT SPEED 12 UP TO 44 M/MIN. FREQUENCY-CONTROLLED
LENGTH SORTING CONVEYOR 15,000 MM
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL SORTING CONV. 150 MM

TECHNICAL DATA BUNKER BELTS, 4 PIECES
MANUFACTURER BOLLEGRAAF
TYPE HBT 800 /1,000 * 10,940 MM
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 0,22 UP TO 0,9 KW
BELT SPEED 1 UP TO 4 M/MIN. FREQUENCY-CONTROLLED
LENGTH BUNKER CONVEYOR 10,940 MM
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 2,000 MM
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-compl. line for plastic fenstersma-ref-6396kategorie: plastic window construction complete produktionslinienhersteller: urbanbaujahr: 2001leistung: up to 30 windows per 8 h schichtmit 3 mannmaschinen: 1) double miter saw haffner dgs 187 k (1995) 2) cold saws trs 275 k () 2001) 3) water slot milling ws 95 k (2001) 4) copy milling cutter m olivenbohreinheit ((2001)5) single head welding machine aks 1105 (2001) 6) two head welding machine aks 5305/2 ff (2001) 7) plastering machine urban sv 480 (1995) 8) snap cutter graule akf 6/250 (2001) 9) suction (2001) 10 ) glass strip saw (2001) 11) screw feeder (2001) 12) storage rack for profiles (2001) 13) profile car pwl 100 (2001) 14) reel stand (2001) 15) bench swiveling sth 2500 (2001) 16) wing mounting station fms 2430 (2010) 17) fitting shelf (2010) 18) band saw (2010 ) 19) glazing press 3,000 x 2,200 mm (2010) and various accessories, roller conveyors, etc. condition: ready for use in stromstandort: bayernverfã¼gbarkeit: sofortlieferbedingungen: lkwzahlungsbedingungen loaded from standortfrei: 100% prior to removal/loading   COMPL. LINE FOR PLASTIC FENSTERSMA-REF-6396KATEGORIE: PLASTIC WINDOW CONSTRUCTION COMPLETE PRODUKTIONSLINIENHERSTELLER: URBANBAUJAHR: 2001LEISTUNG: UP TO 30 WINDOWS PER 8 H SCHICHTMIT 3 MANNMASCHINEN: 1) DOUBLE MITER SAW HAFFNER DGS 187 K (1995) 2) COLD SAWS TRS 275 K () 2001) 3) WATER SLOT MILLING WS 95 K (2001) 4) COPY MILLING CUTTER M OLIVENBOHREINHEIT ((2001)5) SINGLE HEAD WELDING MACHINE AKS 1105 (2001) 6) TWO HEAD WELDING MACHINE AKS 5305/2 FF (2001) 7) PLASTERING MACHINE URBAN SV 480 (1995) 8) SNAP CUTTER GRAULE AKF 6/250 (2001) 9) SUCTION (2001) 10 ) GLASS STRIP SAW (2001) 11) SCREW FEEDER (2001) 12) STORAGE RACK FOR PROFILES (2001) 13) PROFILE CAR PWL 100 (2001) 14) REEL STAND (2001) 15) BENCH SWIVELING STH 2500 (2001) 16) WING MOUNTING STATION FMS 2430 (2010) 17) FITTING SHELF (2010) 18) BAND SAW (2010 ) 19) GLAZING PRESS 3,000 X 2,200 MM (2010) AND VARIOUS ACCESSORIES, ROLLER CONVEYORS, ETC. CONDITION: READY FOR USE IN STROMSTANDORT: BAYERNVERF&ATILDE;&FRAC14;GBARKEIT: SOFORTLIEFERBEDINGUNGEN: LKWZAHLUNGSBEDINGUNGEN LOADED FROM STANDORTFREI: 100% PRIOR TO REMOVAL/LOADING
Vendedor: S-MA GmbH
Año de construcción: usado
Precio: 27.000 EU€
Ubicación: Land-the machine is a special four-roller winder, intended for folding sheets al m. al. reflector. it has 3 independent lower rollers shortening the time to a minimum roll. the rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. compensation of sagging upper roller is realized by longitudinal beam. all rollers are driven. the spinning process is carried out without slip to prevent scratching of the workpiece. cnc - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. all rolls are chrome-plated and polished. all axes are programmable. the machine has the possibility of rolling difficult elliptical shapes. THE MACHINE IS A SPECIAL FOUR-ROLLER WINDER, INTENDED FOR FOLDING SHEETS AL M. AL. REFLECTOR. IT HAS 3 INDEPENDENT LOWER ROLLERS SHORTENING THE TIME TO A MINIMUM ROLL. THE ROLLERS ARE SUPPORTED BY ADJUSTABLE, BEARINGS SLIDES FOR EASY COMPENSATION OF THE DEFLECTION DEPENDING ON THE THICKNESS AND HARDNESS OF THE MATERIAL. COMPENSATION OF SAGGING UPPER ROLLER IS REALIZED BY LONGITUDINAL BEAM. ALL ROLLERS ARE DRIVEN. THE SPINNING PROCESS IS CARRIED OUT WITHOUT SLIP TO PREVENT SCRATCHING OF THE WORKPIECE. CNC - EQUIPPED WITH AN INTERPOLATION, IT IS A SIMULTANEOUS ROTATION BENDING ROLLS, ALONG WITH THEIR SHIFT. ALL ROLLS ARE CHROME-PLATED AND POLISHED. ALL AXES ARE PROGRAMMABLE. THE MACHINE HAS THE POSSIBILITY OF ROLLING DIFFICULT ELLIPTICAL SHAPES.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 11.000 €
Ubicación: Land-tri-mode 9/6/4.5 inch image intensifier
stationary x-ray tube 
200 image storage
high resolution 1k x 1k ccd camera
dual high resolution 1k x 1k touch screen monitors
last image hold
edge enhancement
gamma correction
digital windowing
mars-motion artifact reduction
includes sony printer  TRI-MODE 9/6/4.5 INCH IMAGE INTENSIFIER STATIONARY X-RAY TUBE 200 IMAGE STORAGE HIGH RESOLUTION 1K X 1K CCD CAMERA DUAL HIGH RESOLUTION 1K X 1K TOUCH SCREEN MONITORS LAST IMAGE HOLD EDGE ENHANCEMENT GAMMA CORRECTION DIGITAL WINDOWING MARS-MOTION ARTIFACT REDUCTION INCLUDES SONY PRINTER
Vendedor: Block Imaging International
Año de construcción: usado
Precio: 20.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-corners-plastering machine
sma-ref-6367
category: plastic window machinery of plastering machine
manufacturer: urban
type: sv 320
year of construction: 2002
spindle: 1.7 kw
work area: profile height: 35 bis195 mm
width: 25 mm to 145 mm
special features: set up for
rehau
geneo
werrkzeuge incl.
condition: ready to use
under current
location: schleswig-holstein
dimensions: weight: 550 kg
availability: immediately CORNERS-PLASTERING MACHINE SMA-REF-6367 CATEGORY: PLASTIC WINDOW MACHINERY OF PLASTERING MACHINE MANUFACTURER: URBAN TYPE: SV 320 YEAR OF CONSTRUCTION: 2002 SPINDLE: 1.7 KW WORK AREA: PROFILE HEIGHT: 35 BIS195 MM WIDTH: 25 MM TO 145 MM SPECIAL FEATURES: SET UP FOR REHAU GENEO WERRKZEUGE INCL. CONDITION: READY TO USE UNDER CURRENT LOCATION: SCHLESWIG-HOLSTEIN DIMENSIONS: WEIGHT: 550 KG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 1 st.<br/>control: cnc <br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 1 ST.
CONTROL: CNC




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-2 colors screen printing rotation + 2 x renzmann solvent washing and destillation unit from one place as package:

2 colors screen printing rotation
year: 2002
web width: 510 mm
3 dryers up to 250 ° c, web cooling, web cleaning, automatic unwinding and winding (non-stop), rotary die-cutter


1 renzmann solvent washing system
type 360
year: 2002
for 5 round sieves and 5 squeegee sets, with drainer, self-cleaning device, solvent cooling, pneumatic solvent pump, with boiler light, internal suction


1 renzmann solvent distillation unit,
year: 2002
type roto 250
distilling under vacuum, vacuum unit ve05,
automatic filling system with automatic filling, automatic distillation of the residue, automatic thickening of residue, control elements in ex version, sealing plate with suction hood, underframe, suction, dirt and dust tank


availability: now
location: germany
price: on request 2 COLORS SCREEN PRINTING ROTATION + 2 X RENZMANN SOLVENT WASHING AND DESTILLATION UNIT FROM ONE PLACE AS PACKAGE: 2 COLORS SCREEN PRINTING ROTATION YEAR: 2002 WEB WIDTH: 510 MM 3 DRYERS UP TO 250 ° C, WEB COOLING, WEB CLEANING, AUTOMATIC UNWINDING AND WINDING (NON-STOP), ROTARY DIE-CUTTER 1 RENZMANN SOLVENT WASHING SYSTEM TYPE 360 YEAR: 2002 FOR 5 ROUND SIEVES AND 5 SQUEEGEE SETS, WITH DRAINER, SELF-CLEANING DEVICE, SOLVENT COOLING, PNEUMATIC SOLVENT PUMP, WITH BOILER LIGHT, INTERNAL SUCTION 1 RENZMANN SOLVENT DISTILLATION UNIT, YEAR: 2002 TYPE ROTO 250 DISTILLING UNDER VACUUM, VACUUM UNIT VE05, AUTOMATIC FILLING SYSTEM WITH AUTOMATIC FILLING, AUTOMATIC DISTILLATION OF THE RESIDUE, AUTOMATIC THICKENING OF RESIDUE, CONTROL ELEMENTS IN EX VERSION, SEALING PLATE WITH SUCTION HOOD, UNDERFRAME, SUCTION, DIRT AND DUST TANK AVAILABILITY: NOW LOCATION: GERMANY PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Precio: 14.000 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 60/50 mm<br/>control: ja <br/>!! machine is still in use !!<br/><br/>window system gubisch est-h 2000<br/><br/><br/>ablängsäge<br/>----------------<br/>engine 3 kw<br/>speed: 3,000 rpm<br/>saw blade diameter: 400 mm<br/>flange diameter: 80 mm<br/>adjustment: horizontal: manual after mechanical display<br/>adjustment range: 0 - 120 mm<br/><br/>length stop<br/>----------------------<br/>length 3,250 mm, by hand<br/><br/>slot spindle<br/>-------------------<br/>engine 9.2 kw<br/>spindle speed: 4,500 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 300 mm<br/>spindle stroke vertical: 3 x 100 mm for iv 68 - iv 92<br/>tool diameter: max. 400 / min 240 mm<br/>adjustment: horizontal u. vertically in the u-hub<br/>adjustment range: vertical 210 mm under table<br/>number of tools: 3 tool sets a 100 mm<br/><br/>shortest workpieces: 320 mm + spigot<br/><br/><br/>clamping table<br/>----------------------<br/><br/>on ball guide bushes and roller guides<br/><br/>swivel range: yes, 60 degrees in both directions<br/>speeds: 0-28 m / min. infinitely variable, 4 speed ranges<br/>type of counter-timber: counter-disc for 6 tool contour contours, the<br/>be automatically controlled for the intended tool sets.<br/>handover: automatically<br/>mode of operation: individual production, frame-by-frame production and mass <br/>production possible<br/><br/>longitudinal profiling<br/>----------------------<br/><br/>1. profile spindle with synchronous dipping automatic<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>equal and counter run for tear-free refolding<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>2. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>3. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 240 mm<br/><br/>4. spindle glass bead sawing unit, horizontally above<br/>-------------------------------------------------- --------------------<br/>engine 3 kw<br/>revolutions: 3000 rpm<br/>adjustment: horizontal high-low<br/>circle diameter: 250 mm<br/>clamping flange holder: 60 mm diameter<br/>pneumatic glazing bead strip with non-return valve<br/><br/>other features<br/>-------------------------<br/>umfälzeinrichtung<br/>lubricant pump man.<br/>outfeed roller<br/>support rail, swing-out as frame support, from 500 mm to 1000 mm<br/>to fold over<br/><br/>12 inch screen control<br/><br/>option:<br/>********<br/>used window tools oppold iv 68/78 wood 13er achsmaß<br/>bore: 60/50<br/>140 drainage edge<br/>slot: zero 322<br/><br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 60/50 MM
CONTROL: JA
!! MACHINE IS STILL IN USE !!

WINDOW SYSTEM GUBISCH EST-H 2000


ABLäNGSäGE
----------------
ENGINE 3 KW
SPEED: 3,000 RPM
SAW BLADE DIAMETER: 400 MM
FLANGE DIAMETER: 80 MM
ADJUSTMENT: HORIZONTAL: MANUAL AFTER MECHANICAL DISPLAY
ADJUSTMENT RANGE: 0 - 120 MM

LENGTH STOP
----------------------
LENGTH 3,250 MM, BY HAND

SLOT SPINDLE
-------------------
ENGINE 9.2 KW
SPINDLE SPEED: 4,500 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 300 MM
SPINDLE STROKE VERTICAL: 3 X 100 MM FOR IV 68 - IV 92
TOOL DIAMETER: MAX. 400 / MIN 240 MM
ADJUSTMENT: HORIZONTAL U. VERTICALLY IN THE U-HUB
ADJUSTMENT RANGE: VERTICAL 210 MM UNDER TABLE
NUMBER OF TOOLS: 3 TOOL SETS A 100 MM

SHORTEST WORKPIECES: 320 MM + SPIGOT


CLAMPING TABLE
----------------------

ON BALL GUIDE BUSHES AND ROLLER GUIDES

SWIVEL RANGE: YES, 60 DEGREES IN BOTH DIRECTIONS
SPEEDS: 0-28 M / MIN. INFINITELY VARIABLE, 4 SPEED RANGES
TYPE OF COUNTER-TIMBER: COUNTER-DISC FOR 6 TOOL CONTOUR CONTOURS, THE
BE AUTOMATICALLY CONTROLLED FOR THE INTENDED TOOL SETS.
HANDOVER: AUTOMATICALLY
MODE OF OPERATION: INDIVIDUAL PRODUCTION, FRAME-BY-FRAME PRODUCTION AND MASS
PRODUCTION POSSIBLE

LONGITUDINAL PROFILING
----------------------

1. PROFILE SPINDLE WITH SYNCHRONOUS DIPPING AUTOMATIC
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
EQUAL AND COUNTER RUN FOR TEAR-FREE REFOLDING
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

2. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

3. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 240 MM

4. SPINDLE GLASS BEAD SAWING UNIT, HORIZONTALLY ABOVE
-------------------------------------------------- --------------------
ENGINE 3 KW
REVOLUTIONS: 3000 RPM
ADJUSTMENT: HORIZONTAL HIGH-LOW
CIRCLE DIAMETER: 250 MM
CLAMPING FLANGE HOLDER: 60 MM DIAMETER
PNEUMATIC GLAZING BEAD STRIP WITH NON-RETURN VALVE

OTHER FEATURES
-------------------------
UMFäLZEINRICHTUNG
LUBRICANT PUMP MAN.
OUTFEED ROLLER
SUPPORT RAIL, SWING-OUT AS FRAME SUPPORT, FROM 500 MM TO 1000 MM
TO FOLD OVER

12 INCH SCREEN CONTROL

OPTION:
********
USED WINDOW TOOLS OPPOLD IV 68/78 WOOD 13ER ACHSMAß
BORE: 60/50
140 DRAINAGE EDGE
SLOT: ZERO 322


(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-angle welding machine with shrink tunnel
sma-ref-6377
category: miscellaneous packaging technology
manufacturer: kallfass
type: kc 8060 / 650
year of construction: 1991
workspace:
tunnel band-width: 650 mm
tunnel clearance height: 100-400 mm
tunnel hood length: 1,100 mm
transport speed: 2.5-12 m / min
for pe, pp, pof and pvc
condition:
ready for use
under current
location: baden-wã¼rttemberg
availability: immediately ANGLE WELDING MACHINE WITH SHRINK TUNNEL SMA-REF-6377 CATEGORY: MISCELLANEOUS PACKAGING TECHNOLOGY MANUFACTURER: KALLFASS TYPE: KC 8060 / 650 YEAR OF CONSTRUCTION: 1991 WORKSPACE: TUNNEL BAND-WIDTH: 650 MM TUNNEL CLEARANCE HEIGHT: 100-400 MM TUNNEL HOOD LENGTH: 1,100 MM TRANSPORT SPEED: 2.5-12 M / MIN FOR PE, PP, POF AND PVC CONDITION: READY FOR USE UNDER CURRENT LOCATION: BADEN-W&ATILDE;&FRAC14;RTTEMBERG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-sheet cutter ( roll to sheets )
producer : w&h
type : gf 1005
web width : 650 mm.
with : new photo cell for pre-printed material.
SHEET CUTTER ( ROLL TO SHEETS ) PRODUCER : W&H TYPE : GF 1005 WEB WIDTH : 650 MM. WITH : NEW PHOTO CELL FOR PRE-PRINTED MATERIAL.
Vendedor: Palm Brokers
Año de construcción: usado
Precio: used machinery auction RESALE 8.500 €
Ubicación: Land-weight approx.: 3485 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2150 mm<br/>description: linde 2.0 t diesel forklift with only 8656 h, triplex mast with 4700 mm lifting height, free lift 1500 mm, installation height 2150 mm, forks 1100 mm, super-elastic tyres, sideshift, windscreen and roof covering WEIGHT APPROX.: 3485 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2150 MM
DESCRIPTION: LINDE 2.0 T DIESEL FORKLIFT WITH ONLY 8656 H, TRIPLEX MAST WITH 4700 MM LIFTING HEIGHT, FREE LIFT 1500 MM, INSTALLATION HEIGHT 2150 MM, FORKS 1100 MM, SUPER-ELASTIC TYRES, SIDESHIFT, WINDSCREEN AND ROOF COVERING
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-printing machine carint carraro 4+0 colours 
year 1990. 
printing width: max. 700mm---web width-max 750mm
reel diameter: unwind 1000mm----rewind 1000mm
core size: 70-76mm 
printing range: 320 mm  max 900mm
electric supply: 220volts-50 hz – 3 phase
materials to be printed: paper from 40 to 100 gsm
printing speed: up to 150 m/min
you can print on paper such as: lwc-mwc-sc-craft paper and many more. 
in very good condition. 
suited for finer gift-wrapping paper and flower-wrapping paper.
PRINTING MACHINE CARINT CARRARO 4+0 COLOURS YEAR 1990. PRINTING WIDTH: MAX. 700MM---WEB WIDTH-MAX 750MM REEL DIAMETER: UNWIND 1000MM----REWIND 1000MM CORE SIZE: 70-76MM PRINTING RANGE: 320 MM MAX 900MM ELECTRIC SUPPLY: 220VOLTS-50 HZ – 3 PHASE MATERIALS TO BE PRINTED: PAPER FROM 40 TO 100 GSM PRINTING SPEED: UP TO 150 M/MIN YOU CAN PRINT ON PAPER SUCH AS: LWC-MWC-SC-CRAFT PAPER AND MANY MORE. IN VERY GOOD CONDITION. SUITED FOR FINER GIFT-WRAPPING PAPER AND FLOWER-WRAPPING PAPER.
Vendedor: Palm Brokers
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 1680 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2800 mm<br/>description: uv drying tunnel barberan hok 14/3<br> serial number 3632-01-82<br> rebuilt in 2016<br> number of lamps: 4 units<br> length of lamps 1680 mm<br> power of lamps 45 kw<br> without electrical cabinet<br> WEIGHT APPROX.: 1680 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2800 MM
DESCRIPTION: UV DRYING TUNNEL BARBERAN HOK 14/3
SERIAL NUMBER 3632-01-82
REBUILT IN 2016
NUMBER OF LAMPS: 4 UNITS
LENGTH OF LAMPS 1680 MM
POWER OF LAMPS 45 KW
WITHOUT ELECTRICAL CABINET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-printing machine carint carraro 4+0 colours 
year 1995. 
printing width: max. 700mm---web width-max 750mm
reel diameter: unwind 1000mm----rewind 1000mm
core size: 70-76mm 
printing range: 320 mm  max 900mm
electric supply: 220volts-50 hz – 3 phase
materials to be printed: paper from 40 to 100 gsm
printing speed: up to 150 m/min
you can print on paper such as: lwc-mwc-sc-craft paper and many more. 
in very good condition. suited for finer gift-wrapping paper and flower-wrapping paper.
PRINTING MACHINE CARINT CARRARO 4+0 COLOURS YEAR 1995. PRINTING WIDTH: MAX. 700MM---WEB WIDTH-MAX 750MM REEL DIAMETER: UNWIND 1000MM----REWIND 1000MM CORE SIZE: 70-76MM PRINTING RANGE: 320 MM MAX 900MM ELECTRIC SUPPLY: 220VOLTS-50 HZ – 3 PHASE MATERIALS TO BE PRINTED: PAPER FROM 40 TO 100 GSM PRINTING SPEED: UP TO 150 M/MIN YOU CAN PRINT ON PAPER SUCH AS: LWC-MWC-SC-CRAFT PAPER AND MANY MORE. IN VERY GOOD CONDITION. SUITED FOR FINER GIFT-WRAPPING PAPER AND FLOWER-WRAPPING PAPER.
Vendedor: Palm Brokers
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 2600 x 2100 x 1500 mm<br/>description: uv drying tunnel barberan hok 14/3<br> serial number 7141-02-91<br> rebuilt in 2016<br> number of lamps: 4 units<br> length of lamps 1600 mm<br> power of lamps 45 kw<br> motor power 4,4 kw<br> without electrical cabinet<br> WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 2600 X 2100 X 1500 MM
DESCRIPTION: UV DRYING TUNNEL BARBERAN HOK 14/3
SERIAL NUMBER 7141-02-91
REBUILT IN 2016
NUMBER OF LAMPS: 4 UNITS
LENGTH OF LAMPS 1600 MM
POWER OF LAMPS 45 KW
MOTOR POWER 4,4 KW
WITHOUT ELECTRICAL CABINET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-wmw
machine name  thread rolling machine
manufacturer  wmw
model na
location  mumbai
year of manufacturing 
technical specification 
max. length of thread	2000.0 mm
max. thrust 12.5 t
min/max of thread 70
motor power WMW MACHINE NAME THREAD ROLLING MACHINE MANUFACTURER WMW MODEL NA LOCATION MUMBAI YEAR OF MANUFACTURING TECHNICAL SPECIFICATION MAX. LENGTH OF THREAD 2000.0 MM MAX. THRUST 12.5 T MIN/MAX OF THREAD 70 MOTOR POWER
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: used machinery auction RESALE 7.500 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 11000 x 3000 x 3500 mm<br/>description: erregi packaging line<br> serial number c3gb152002<br> maximum piece width 1500 mm<br> number of packaging rolls: 6 pcs.<br> swivel arm to help load the coils<br> power of the packaging machine 8.6 kw<br> heating tunnel serial number t700152002<br> heating tunnel width 1500 mm<br> maximum tunnel height 900 mm<br> power of the tunnel 54 kw<br> ce standards WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 11000 X 3000 X 3500 MM
DESCRIPTION: ERREGI PACKAGING LINE
SERIAL NUMBER C3GB152002
MAXIMUM PIECE WIDTH 1500 MM
NUMBER OF PACKAGING ROLLS: 6 PCS.
SWIVEL ARM TO HELP LOAD THE COILS
POWER OF THE PACKAGING MACHINE 8.6 KW
HEATING TUNNEL SERIAL NUMBER T700152002
HEATING TUNNEL WIDTH 1500 MM
MAXIMUM TUNNEL HEIGHT 900 MM
POWER OF THE TUNNEL 54 KW
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-stanko
machine name  thread rolling machine
manufacturer  stanko
model na
location  mumbai
year of manufacturing 
technical specification 
25 tons STANKO MACHINE NAME THREAD ROLLING MACHINE MANUFACTURER STANKO MODEL NA LOCATION MUMBAI YEAR OF MANUFACTURING TECHNICAL SPECIFICATION 25 TONS
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: used machinery auction RESALE 16.900 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 4000 x 3200 x 1900 mm<br/>description: - travels of x/y/z: 2000/3000/150 mm<br> - speed of longitudinal-, cross- as well as vertical movement: 8 m/min<br> - cutting range: 3000 x 2000 x 20 mm<br> - power consumption: 10 kw<br> - inclusive kmt sand box<br> - inclusive kmt streamline sl-v 50 classic pressure transducer<br> - inclusive salt container<br> - with windows operating system WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 3200 X 1900 MM
DESCRIPTION: - TRAVELS OF X/Y/Z: 2000/3000/150 MM
- SPEED OF LONGITUDINAL-, CROSS- AS WELL AS VERTICAL MOVEMENT: 8 M/MIN
- CUTTING RANGE: 3000 X 2000 X 20 MM
- POWER CONSUMPTION: 10 KW
- INCLUSIVE KMT SAND BOX
- INCLUSIVE KMT STREAMLINE SL-V 50 CLASSIC PRESSURE TRANSDUCER
- INCLUSIVE SALT CONTAINER
- WITH WINDOWS OPERATING SYSTEM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-lightweight steel framed warehouse from 1998 with a covered floor surface area of approximately 864 square meters [36m * 24m * 5.7 / 7.8 m] which is due to be dismantled mid april 2019.

future uses:
as a factory building, craftsmen workshop, warehouse, machine shop and much more.

approximate dimensions:
covered area: 864 square meters; usable area: approx. 843 sq m;
hall length: 36.07 meters outside wall cladding;
longitudinal grid: 6,00 m bay width.
hall width: approx. 24.07 m outside of wall cladding;
endwall grid: 6.00 m distance between end wall posts.
clear hight: 5,00 m to the frame tie/ strap;
eave height: 5.74 m top steel;
apex hight: 7,86 meters top of steel work;
roof pitch: 10 degree symmetrical saddle roof;
snow load: so = 0,75 kn/sqm / 75 kg/m²;
wind load: alex = 0,50 kn/m² pressure;

structural steel work:
bolted frame structure from hot-rolled, hot-dip galvanized euro-profiles of steel grade s 235 jr g2 according to din en 10 027-1 (st 37). it's 5 main frames with uprights ipe 300 and trusses ipe 360 with frame-ties fl 8 x 100 s 355; two end wall frames with corner posts and intermediary posts he-a 140 spaced 6.00 c2c. 

roof covering:
sandwich iso roof panels - ral 9002 - mounted on galvanized cold formed z profile purlins.

wall covering:
horizontal fixed corrugated steel sheets ral 9006 - white aluminium and steel trapezoidal profiles (primed and coated). the wall panel is dented and incomplete because of the adjacent connecting building. 

facilities:
1x sectional door (4000 x 4000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the end wall.
4x smoke and heat vent flaps (1800 x 1200 mm);
various lights with switch gear and fuse box;

documentation: drawings from 1997/ 1998.
hall location: bavaria. availability and viewing by appointment.
availability: to be removed by the end of april.

net price:
upon written request with full company / contact information.    LIGHTWEIGHT STEEL FRAMED WAREHOUSE FROM 1998 WITH A COVERED FLOOR SURFACE AREA OF APPROXIMATELY 864 SQUARE METERS [36M * 24M * 5.7 / 7.8 M] WHICH IS DUE TO BE DISMANTLED MID APRIL 2019. FUTURE USES: AS A FACTORY BUILDING, CRAFTSMEN WORKSHOP, WAREHOUSE, MACHINE SHOP AND MUCH MORE. APPROXIMATE DIMENSIONS: COVERED AREA: 864 SQUARE METERS; USABLE AREA: APPROX. 843 SQ M; HALL LENGTH: 36.07 METERS OUTSIDE WALL CLADDING; LONGITUDINAL GRID: 6,00 M BAY WIDTH. HALL WIDTH: APPROX. 24.07 M OUTSIDE OF WALL CLADDING; ENDWALL GRID: 6.00 M DISTANCE BETWEEN END WALL POSTS. CLEAR HIGHT: 5,00 M TO THE FRAME TIE/ STRAP; EAVE HEIGHT: 5.74 M TOP STEEL; APEX HIGHT: 7,86 METERS TOP OF STEEL WORK; ROOF PITCH: 10 DEGREE SYMMETRICAL SADDLE ROOF; SNOW LOAD: SO = 0,75 KN/SQM / 75 KG/M²; WIND LOAD: ALEX = 0,50 KN/M² PRESSURE; STRUCTURAL STEEL WORK: BOLTED FRAME STRUCTURE FROM HOT-ROLLED, HOT-DIP GALVANIZED EURO-PROFILES OF STEEL GRADE S 235 JR G2 ACCORDING TO DIN EN 10 027-1 (ST 37). IT'S 5 MAIN FRAMES WITH UPRIGHTS IPE 300 AND TRUSSES IPE 360 WITH FRAME-TIES FL 8 X 100 S 355; TWO END WALL FRAMES WITH CORNER POSTS AND INTERMEDIARY POSTS HE-A 140 SPACED 6.00 C2C. ROOF COVERING: SANDWICH ISO ROOF PANELS - RAL 9002 - MOUNTED ON GALVANIZED COLD FORMED Z PROFILE PURLINS. WALL COVERING: HORIZONTAL FIXED CORRUGATED STEEL SHEETS RAL 9006 - WHITE ALUMINIUM AND STEEL TRAPEZOIDAL PROFILES (PRIMED AND COATED). THE WALL PANEL IS DENTED AND INCOMPLETE BECAUSE OF THE ADJACENT CONNECTING BUILDING. FACILITIES: 1X SECTIONAL DOOR (4000 X 4000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE END WALL. 4X SMOKE AND HEAT VENT FLAPS (1800 X 1200 MM); VARIOUS LIGHTS WITH SWITCH GEAR AND FUSE BOX; DOCUMENTATION: DRAWINGS FROM 1997/ 1998. HALL LOCATION: BAVARIA. AVAILABILITY AND VIEWING BY APPOINTMENT. AVAILABILITY: TO BE REMOVED BY THE END OF APRIL. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Precio: used machinery auction RESALE 5.900 €
Ubicación: Land-weight approx.: 3846 kg<br/>dimensions (l x w x h) approx.: 1400 x 2500 x 2130 mm<br/>description: 2.5 t gas forklift, 11388 h, 3300 mm lifting height, installation height 2130 mm, forks 1200 mm, super-elastic tyres, roof coverage and windscreen WEIGHT APPROX.: 3846 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 2500 X 2130 MM
DESCRIPTION: 2.5 T GAS FORKLIFT, 11388 H, 3300 MM LIFTING HEIGHT, INSTALLATION HEIGHT 2130 MM, FORKS 1200 MM, SUPER-ELASTIC TYRES, ROOF COVERAGE AND WINDSCREEN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ghioldi film extruder  
for ldpe mdpe e  biocompostabile
screw diam 60 mm
rotating die diam. 200 mm.
calibration cage
pull off unit mm.1200 
back to back winding unit width 1.200 mm. 
onstruction year 1996
good running conditions
can be seen running until end march
installation possible on separate agreement GHIOLDI FILM EXTRUDER FOR LDPE MDPE E BIOCOMPOSTABILE SCREW DIAM 60 MM ROTATING DIE DIAM. 200 MM. CALIBRATION CAGE PULL OFF UNIT MM.1200 BACK TO BACK WINDING UNIT WIDTH 1.200 MM. ONSTRUCTION YEAR 1996 GOOD RUNNING CONDITIONS CAN BE SEEN RUNNING UNTIL END MARCH INSTALLATION POSSIBLE ON SEPARATE AGREEMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-DE Germany, 37120 Bovenden
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 450 €
Ubicación: Land-water slot milling machine for plastic window production WATER SLOT MILLING MACHINE FOR PLASTIC WINDOW PRODUCTION
Vendedor: MSH-nrw GmbH
Año de construcción: usado
Ubicación: Land-capacity: 4200 mm x 2200 mm.<br/>sawblade height: 135 mm.<br/>main saw motor 21 kw / scoring motor 1.9 kw<br/>saw-carriage speed: 6-150 m / min, returnspeed 150 m / min <br/>programm fence speed: 80 m / min (limited to 25 m / min)<br/>8 grippers, centers 65/165/265/465/1065/1965/2865/3765 mm.<br/>rotatable air cushion table in front of the machine 4200 x 2200 mm<br/>control: mcs evolution 2.0<br/>hardware: windows xp - tft display<br/>software: graphical representation of the saw plan<br/>online connection for data transfer with external optimization (eg ardis)<br/>connection with automatic warehouse<br/>panels are placed directly behind the saw by means of an automatic warehouse<br/>roller conveyor behind cutting line length 9m60 CAPACITY: 4200 MM X 2200 MM.
SAWBLADE HEIGHT: 135 MM.
MAIN SAW MOTOR 21 KW / SCORING MOTOR 1.9 KW
SAW-CARRIAGE SPEED: 6-150 M / MIN, RETURNSPEED 150 M / MIN
PROGRAMM FENCE SPEED: 80 M / MIN (LIMITED TO 25 M / MIN)
8 GRIPPERS, CENTERS 65/165/265/465/1065/1965/2865/3765 MM.
ROTATABLE AIR CUSHION TABLE IN FRONT OF THE MACHINE 4200 X 2200 MM
CONTROL: MCS EVOLUTION 2.0
HARDWARE: WINDOWS XP - TFT DISPLAY
SOFTWARE: GRAPHICAL REPRESENTATION OF THE SAW PLAN
ONLINE CONNECTION FOR DATA TRANSFER WITH EXTERNAL OPTIMIZATION (EG ARDIS)
CONNECTION WITH AUTOMATIC WAREHOUSE
PANELS ARE PLACED DIRECTLY BEHIND THE SAW BY MEANS OF AN AUTOMATIC WAREHOUSE
ROLLER CONVEYOR BEHIND CUTTING LINE LENGTH 9M60
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-line for processing strips of iron coils	
belt width: maximum 400 mm	
speed (infinitely adjustable): 3 ÷ 25 m / min	
load capacity of the magnetic conveyor: inf. maximum 40 kg / lane	
conveying speed: 25 m / min	
track length: maximum 4700 mm	
pressure: min. 0.5 mpa	
voltage: 3 + pen 230 / 400v (50hz)	
one-sided processing - jof 400/3000	
year of production: 1998	
inner diameter of the coil without extension	
minute 500 mm (max 550 mm)	
inner diameter of the coil with extensions	
min.550 mm (max 650 mm)	
coil weight: 3000 kg	
working air pressure: 0.4 - 0.5 mpa	
weight: 860 kg	
dimensions (l x w): 880 x 1350 mm	
height: 1200x 520 x1520 mm	
bandgluster rpf 400 / 2a	
belt width: 400 mm	
cylinder diameter: 80 mm	
dimensions (l x w x h):	
686 x 722 x 1270 mm	
weight: 750 kg	
electronic feeder srf400	
accessories:	
unwinding tools jof 400/3000 with pinch roller	
straightening machine for rpf 400 / 2a	
electronic feeder srf400	
magnetic conveyor mdf 400/4700	
control panel electrical connections	
air distribution	
le 160 c eccentric press	
magnetic conveyor mdf 400/4700	
control panel electrical connection le 63 p (1982)	
le 63 c press (year of production: 1986)	
lis le 40 c (1978)	
lis le 40 c (1989)	
pneumatic spot welder bp 90.12	
pneumatic spot welder bp 40.22	
hook-in pliers bz 80 (2pcs)	
bz 3322 n (1 piece)  LINE FOR PROCESSING STRIPS OF IRON COILS BELT WIDTH: MAXIMUM 400 MM SPEED (INFINITELY ADJUSTABLE): 3 ÷ 25 M / MIN LOAD CAPACITY OF THE MAGNETIC CONVEYOR: INF. MAXIMUM 40 KG / LANE CONVEYING SPEED: 25 M / MIN TRACK LENGTH: MAXIMUM 4700 MM PRESSURE: MIN. 0.5 MPA VOLTAGE: 3 + PEN 230 / 400V (50HZ) ONE-SIDED PROCESSING - JOF 400/3000 YEAR OF PRODUCTION: 1998 INNER DIAMETER OF THE COIL WITHOUT EXTENSION MINUTE 500 MM (MAX 550 MM) INNER DIAMETER OF THE COIL WITH EXTENSIONS MIN.550 MM (MAX 650 MM) COIL WEIGHT: 3000 KG WORKING AIR PRESSURE: 0.4 - 0.5 MPA WEIGHT: 860 KG DIMENSIONS (L X W): 880 X 1350 MM HEIGHT: 1200X 520 X1520 MM BANDGLUSTER RPF 400 / 2A BELT WIDTH: 400 MM CYLINDER DIAMETER: 80 MM DIMENSIONS (L X W X H): 686 X 722 X 1270 MM WEIGHT: 750 KG ELECTRONIC FEEDER SRF400 ACCESSORIES: UNWINDING TOOLS JOF 400/3000 WITH PINCH ROLLER STRAIGHTENING MACHINE FOR RPF 400 / 2A ELECTRONIC FEEDER SRF400 MAGNETIC CONVEYOR MDF 400/4700 CONTROL PANEL ELECTRICAL CONNECTIONS AIR DISTRIBUTION LE 160 C ECCENTRIC PRESS MAGNETIC CONVEYOR MDF 400/4700 CONTROL PANEL ELECTRICAL CONNECTION LE 63 P (1982) LE 63 C PRESS (YEAR OF PRODUCTION: 1986) LIS LE 40 C (1978) LIS LE 40 C (1989) PNEUMATIC SPOT WELDER BP 90.12 PNEUMATIC SPOT WELDER BP 40.22 HOOK-IN PLIERS BZ 80 (2PCS) BZ 3322 N (1 PIECE)
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-capacity: 3100 mm x 2200 mm.<br/>sawblade height: 135 mm.<br/>main saw motor 32 kw / scoring motor 1.9 kw<br/>saw-carriage speed: 6-150 m / min, returnspeed 150 m / min <br/>programm fence speed: 80 m / min (limited to 25 m / min)<br/>10 grippers, centers 65/165/265/365/465/765/1065/1365/1965/2865 mm.<br/>rotatable air cushion table in front of the machine 3200 x 2200 mm<br/>control: mcs evolution 2.0<br/>hardware: windows xp - tft display<br/>software: graphical representation of the saw plan<br/>online connection for data transfer with external optimization (eg ardis)<br/>connection with automatic warehouse<br/>panels are placed directly behind the saw by means of an automatic warehouse<br/>roller conveyor behind cutting line length 9m60 CAPACITY: 3100 MM X 2200 MM.
SAWBLADE HEIGHT: 135 MM.
MAIN SAW MOTOR 32 KW / SCORING MOTOR 1.9 KW
SAW-CARRIAGE SPEED: 6-150 M / MIN, RETURNSPEED 150 M / MIN
PROGRAMM FENCE SPEED: 80 M / MIN (LIMITED TO 25 M / MIN)
10 GRIPPERS, CENTERS 65/165/265/365/465/765/1065/1365/1965/2865 MM.
ROTATABLE AIR CUSHION TABLE IN FRONT OF THE MACHINE 3200 X 2200 MM
CONTROL: MCS EVOLUTION 2.0
HARDWARE: WINDOWS XP - TFT DISPLAY
SOFTWARE: GRAPHICAL REPRESENTATION OF THE SAW PLAN
ONLINE CONNECTION FOR DATA TRANSFER WITH EXTERNAL OPTIMIZATION (EG ARDIS)
CONNECTION WITH AUTOMATIC WAREHOUSE
PANELS ARE PLACED DIRECTLY BEHIND THE SAW BY MEANS OF AN AUTOMATIC WAREHOUSE
ROLLER CONVEYOR BEHIND CUTTING LINE LENGTH 9M60
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-wallace hardness tester WALLACE HARDNESS TESTER
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-notching machine for doors, windows and furniture doors<br/>machine has got 3 milling tools driven by 1 motor of 3 hp (3000 rpm)<br/>max. timber section: 45 x 45 mm<br/>max. length between 2 notches: 600 mm<br/>automatic cycle, timber is transported by a carriage with stroke of 600 mm<br/>motor hydr: 1 hp<br/> NOTCHING MACHINE FOR DOORS, WINDOWS AND FURNITURE DOORS
MACHINE HAS GOT 3 MILLING TOOLS DRIVEN BY 1 MOTOR OF 3 HP (3000 RPM)
MAX. TIMBER SECTION: 45 X 45 MM
MAX. LENGTH BETWEEN 2 NOTCHES: 600 MM
AUTOMATIC CYCLE, TIMBER IS TRANSPORTED BY A CARRIAGE WITH STROKE OF 600 MM
MOTOR HYDR: 1 HP
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-shrink packaging machine pactur type lady pack 30/l, consisting of:-page welding machine type 30/l - shrink tunnel type tl30/b. SHRINK PACKAGING MACHINE PACTUR TYPE LADY PACK 30/L, CONSISTING OF:-PAGE WELDING MACHINE TYPE 30/L - SHRINK TUNNEL TYPE TL30/B.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Ubicación: Land-equipment:<br/>electrical fence <br/>cross-cut saw, diameter 450 mm, motor 3kw<br/>tenoning spindle, 50mm, length 320 mm, motor 5,5kw<br/>2 x profiling spindle, 50 mm, length 320 mm, motor 5,5 kw<br/>1 x profiling spindle, 40 mm, length 180 mm, motor 3kw<br/>glazing bead saw, diameter 200 mm, motor 2,2kw EQUIPMENT:
ELECTRICAL FENCE
CROSS-CUT SAW, DIAMETER 450 MM, MOTOR 3KW
TENONING SPINDLE, 50MM, LENGTH 320 MM, MOTOR 5,5KW
2 X PROFILING SPINDLE, 50 MM, LENGTH 320 MM, MOTOR 5,5 KW
1 X PROFILING SPINDLE, 40 MM, LENGTH 180 MM, MOTOR 3KW
GLAZING BEAD SAW, DIAMETER 200 MM, MOTOR 2,2KW
Vendedor: Vebim
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more WIND types: