555 ofertas

Año de construcción: usado
Ubicación: Land-aircooled liquid chiller carrier
with 3 cooling circuits, each one screw compressor.
2 shell& tube evaporators
high efficiency option,winter option up to -20c ambient
freon: r134a
cooling capacity: 1247 kw (360 refr.tons)
filled,tested and ready to go.
very good condition,low hours  AIRCOOLED LIQUID CHILLER CARRIER WITH 3 COOLING CIRCUITS, EACH ONE SCREW COMPRESSOR. 2 SHELL& TUBE EVAPORATORS HIGH EFFICIENCY OPTION,WINTER OPTION UP TO -20C AMBIENT FREON: R134A COOLING CAPACITY: 1247 KW (360 REFR.TONS) FILLED,TESTED AND READY TO GO. VERY GOOD CONDITION,LOW HOURS
Vendedor: I.C.E.
Año de construcción: usado
Precio: 94.900 €
Ubicación: Land-; mileage [km]: 53500; power [ps]: 428; gross weight [kg]: 18000; transmission: automatisch; accessories: abs, bordcomputer, differentialsperre, klimaanlage, tempomat, ets - eletronische traktionskontrolle; colour: silber; wheelbase: 3900; suspension type: blatt/blatt; max payload [kg]: 5880 ; MILEAGE [KM]: 53500; POWER [PS]: 428; GROSS WEIGHT [KG]: 18000; TRANSMISSION: AUTOMATISCH; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, KLIMAANLAGE, TEMPOMAT, ETS - ELETRONISCHE TRAKTIONSKONTROLLE; COLOUR: SILBER; WHEELBASE: 3900; SUSPENSION TYPE: BLATT/BLATT; MAX PAYLOAD [KG]: 5880
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.200 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 5000 x 3350 x 3200 mm<br/>description: with sliding- and side door, sunblind and roller blind, anti-lockout device at one door, height at front 2600 mm, at back 3200 mm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 3350 X 3200 MM
DESCRIPTION: WITH SLIDING- AND SIDE DOOR, SUNBLIND AND ROLLER BLIND, ANTI-LOCKOUT DEVICE AT ONE DOOR, HEIGHT AT FRONT 2600 MM, AT BACK 3200 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--made in germany
-the original documentation on dtr
-very good condition
-multiblade used

technical parameters:

-max cutting height 170 mm
-min length of a single element to be administered to cut 740
-max cutting width 350 mm

-max distance from the guide to track measure 380 mm
-max blade diameter 450 mm

-80 mm sleeve diameter
-spindle diameter saw blade 60 mm
-bottom bracket drive motor power of vertical shaft set 0, 75kw

-main engine power 75 kw
-feeding motor power 4kw

-adjustable feed rate on the inverter 4-24 m/min

-the working surface of the table 1910x790mm
-table height from the base of the 820mm

-dimensions length/width/height 4460/1780/1870mm
-weight 3500 kg

perks:

-high quality low price
-machine is fully operational, after review of the
-ability to check on the place of purchase and transport
-we send machines in every corner of the country-the possibility to leave another machine in the settlement -MADE IN GERMANY -THE ORIGINAL DOCUMENTATION ON DTR -VERY GOOD CONDITION -MULTIBLADE USED TECHNICAL PARAMETERS: -MAX CUTTING HEIGHT 170 MM -MIN LENGTH OF A SINGLE ELEMENT TO BE ADMINISTERED TO CUT 740 -MAX CUTTING WIDTH 350 MM -MAX DISTANCE FROM THE GUIDE TO TRACK MEASURE 380 MM -MAX BLADE DIAMETER 450 MM -80 MM SLEEVE DIAMETER -SPINDLE DIAMETER SAW BLADE 60 MM -BOTTOM BRACKET DRIVE MOTOR POWER OF VERTICAL SHAFT SET 0, 75KW -MAIN ENGINE POWER 75 KW -FEEDING MOTOR POWER 4KW -ADJUSTABLE FEED RATE ON THE INVERTER 4-24 M/MIN -THE WORKING SURFACE OF THE TABLE 1910X790MM -TABLE HEIGHT FROM THE BASE OF THE 820MM -DIMENSIONS LENGTH/WIDTH/HEIGHT 4460/1780/1870MM -WEIGHT 3500 KG PERKS: -HIGH QUALITY LOW PRICE -MACHINE IS FULLY OPERATIONAL, AFTER REVIEW OF THE -ABILITY TO CHECK ON THE PLACE OF PURCHASE AND TRANSPORT -WE SEND MACHINES IN EVERY CORNER OF THE COUNTRY-THE POSSIBILITY TO LEAVE ANOTHER MACHINE IN THE SETTLEMENT
Vendedor: StanDrew
Año de construcción: usado
Precio: 56.900 €
Ubicación: Land-; mileage [km]: 322500; power [ps]: 462; gross weight [kg]: 32000; transmission: mechanisch; front tyre size: 315/80r22.5; rear tyre size: 315/80r22.5; accessories: abs, bordcomputer, differentialsperre, klimaanlage, tempomat; colour: weiß; wheelbase: 5050; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 6000x2380x1000; max payload [kg]: 17080; emission class: euro 5 ; MILEAGE [KM]: 322500; POWER [PS]: 462; GROSS WEIGHT [KG]: 32000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 315/80R22.5; REAR TYRE SIZE: 315/80R22.5; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, KLIMAANLAGE, TEMPOMAT; COLOUR: WEIß; WHEELBASE: 5050; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 6000X2380X1000; MAX PAYLOAD [KG]: 17080; EMISSION CLASS: EURO 5
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land--made in germany
-the original documentation on dtr
-very good condition

technical parameters:

-max cutting height 170 mm
-min length of a single element to be administered to cut 740
-max cutting width 350 mm

-max distance from the guide to track measure 380 mm
-max blade diameter 450 mm

-80 mm sleeve diameter
-spindle diameter saw blade 60 mm
-bottom bracket drive motor power of vertical shaft set 0, 75kw

-the power of the main engine 55 kw
-feeding motor power 4kw

-adjustable feed rate on the inverter 4-24 m/min

-the working surface of the table 1910x790mm
-table height from the base of the 820mm

-dimensions length/width/height 4460/1780/1870mm
-weight 3500 kg

perks:

-high quality low price
-machine is fully operational, after review of the
-ability to check on the place of purchase and transport
-we send machines in every corner of the country-the possibility to leave another machine in the settlement -MADE IN GERMANY -THE ORIGINAL DOCUMENTATION ON DTR -VERY GOOD CONDITION TECHNICAL PARAMETERS: -MAX CUTTING HEIGHT 170 MM -MIN LENGTH OF A SINGLE ELEMENT TO BE ADMINISTERED TO CUT 740 -MAX CUTTING WIDTH 350 MM -MAX DISTANCE FROM THE GUIDE TO TRACK MEASURE 380 MM -MAX BLADE DIAMETER 450 MM -80 MM SLEEVE DIAMETER -SPINDLE DIAMETER SAW BLADE 60 MM -BOTTOM BRACKET DRIVE MOTOR POWER OF VERTICAL SHAFT SET 0, 75KW -THE POWER OF THE MAIN ENGINE 55 KW -FEEDING MOTOR POWER 4KW -ADJUSTABLE FEED RATE ON THE INVERTER 4-24 M/MIN -THE WORKING SURFACE OF THE TABLE 1910X790MM -TABLE HEIGHT FROM THE BASE OF THE 820MM -DIMENSIONS LENGTH/WIDTH/HEIGHT 4460/1780/1870MM -WEIGHT 3500 KG PERKS: -HIGH QUALITY LOW PRICE -MACHINE IS FULLY OPERATIONAL, AFTER REVIEW OF THE -ABILITY TO CHECK ON THE PLACE OF PURCHASE AND TRANSPORT -WE SEND MACHINES IN EVERY CORNER OF THE COUNTRY-THE POSSIBILITY TO LEAVE ANOTHER MACHINE IN THE SETTLEMENT
Vendedor: StanDrew
Año de construcción: usado
Precio: 49.900 €
Ubicación: Land-; mileage [km]: 47300; power [ps]: 286; gross weight [kg]: 18000; transmission: mechanisch; front tyre size: 13r22.5; rear tyre size: 13r22.5; accessories: abs, bordcomputer, differentialsperre, tempomat; colour: weiß; wheelbase: 3900; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 4600x2380x650; max payload [kg]: 7800; emission class: euro 4 ; MILEAGE [KM]: 47300; POWER [PS]: 286; GROSS WEIGHT [KG]: 18000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 13R22.5; REAR TYRE SIZE: 13R22.5; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, TEMPOMAT; COLOUR: WEIß; WHEELBASE: 3900; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 4600X2380X650; MAX PAYLOAD [KG]: 7800; EMISSION CLASS: EURO 4
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-year of manufacture: 2009

technical parameters:

-planing width 200 mm
-planing height 120 mm

1 head lower 5.5 kw
2 head of law 4 kw
3 head left 4 kw
4 top head 5.5 kw

-spindle diameter 40 mm
-feed motor 3 kw
-adjustable feed speed on the geared motor
-electrical height adjustment
-height adjustment engine 1.1 kw

-two rolls of the countertop stretching
-six of the upper roller steel
-one roll of rubber upper
-cardan shafts feed

-chrome-plated tops
-central lubrication
-feeding table length 2130 mm
-nozzle diameter 130 mm

overall dimensions of the machine:

-length of 380 cm
– width 190 cm
-height 185 cm

-weight of ~ 3000 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF MANUFACTURE: 2009 TECHNICAL PARAMETERS: -PLANING WIDTH 200 MM -PLANING HEIGHT 120 MM 1 HEAD LOWER 5.5 KW 2 HEAD OF LAW 4 KW 3 HEAD LEFT 4 KW 4 TOP HEAD 5.5 KW -SPINDLE DIAMETER 40 MM -FEED MOTOR 3 KW -ADJUSTABLE FEED SPEED ON THE GEARED MOTOR -ELECTRICAL HEIGHT ADJUSTMENT -HEIGHT ADJUSTMENT ENGINE 1.1 KW -TWO ROLLS OF THE COUNTERTOP STRETCHING -SIX OF THE UPPER ROLLER STEEL -ONE ROLL OF RUBBER UPPER -CARDAN SHAFTS FEED -CHROME-PLATED TOPS -CENTRAL LUBRICATION -FEEDING TABLE LENGTH 2130 MM -NOZZLE DIAMETER 130 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH OF 380 CM – WIDTH 190 CM -HEIGHT 185 CM -WEIGHT OF ~ 3000 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: 51.900 €
Ubicación: Land-; mileage [km]: 33766; power [ps]: 286; gross weight [kg]: 18000; transmission: mechanisch; front tyre size: 13r22.5; rear tyre size: 13r22.5; accessories: abs, bordcomputer, differentialsperre, tempomat; colour: weiß; wheelbase: 3900; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 4600x2380x650; max payload [kg]: 7900; emission class: euro 4 ; MILEAGE [KM]: 33766; POWER [PS]: 286; GROSS WEIGHT [KG]: 18000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 13R22.5; REAR TYRE SIZE: 13R22.5; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, TEMPOMAT; COLOUR: WEIß; WHEELBASE: 3900; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 4600X2380X650; MAX PAYLOAD [KG]: 7900; EMISSION CLASS: EURO 4
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-heat pump unit fa. bbc - york with frick screw compressors and one diesel engine.
manufacturer: bbc - york
type: tdsh 163l
screw compressor manufacturer: frick
type: isg 360-2350
diesel engine manufacturers: one
type: d 2866 e
year of construction: 1990
condition: seal defective
description:
bdwsks3uc0
the heat pump has been about 20 years each in the winter months in operation. she was converted in the year 2015 on the refrigerant r417a and thus is been operated up to the year 2017. it is assumed that about 30% of the quantity has escaped. up on the seal, the system is fully operational. in the diesel engine, the cylinders were already overhauled. the documentation is complete.
in addition to this machine we sell installed gas alarm device for r417a a 2015 (company beutler). this is another in a range described.
plant dismantled abholen finished.

price on request HEAT PUMP UNIT FA. BBC - YORK WITH FRICK SCREW COMPRESSORS AND ONE DIESEL ENGINE. MANUFACTURER: BBC - YORK TYPE: TDSH 163L SCREW COMPRESSOR MANUFACTURER: FRICK TYPE: ISG 360-2350 DIESEL ENGINE MANUFACTURERS: ONE TYPE: D 2866 E YEAR OF CONSTRUCTION: 1990 CONDITION: SEAL DEFECTIVE DESCRIPTION: BDWSKS3UC0 THE HEAT PUMP HAS BEEN ABOUT 20 YEARS EACH IN THE WINTER MONTHS IN OPERATION. SHE WAS CONVERTED IN THE YEAR 2015 ON THE REFRIGERANT R417A AND THUS IS BEEN OPERATED UP TO THE YEAR 2017. IT IS ASSUMED THAT ABOUT 30% OF THE QUANTITY HAS ESCAPED. UP ON THE SEAL, THE SYSTEM IS FULLY OPERATIONAL. IN THE DIESEL ENGINE, THE CYLINDERS WERE ALREADY OVERHAULED. THE DOCUMENTATION IS COMPLETE. IN ADDITION TO THIS MACHINE WE SELL INSTALLED GAS ALARM DEVICE FOR R417A A 2015 (COMPANY BEUTLER). THIS IS ANOTHER IN A RANGE DESCRIBED. PLANT DISMANTLED ABHOLEN FINISHED. PRICE ON REQUEST
Vendedor: Klasing Kabel GmbH
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-; mileage [km]: 20451; power [ps]: 105; gross weight [kg]: 4300; transmission: mechanisch; front tyre size: 195 r 14; rear tyre size: 195 r 14; colour: weiß; wheelbase: 2650; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 2100x1495x500; max payload [kg]: 1790; emission class: euro 2 ; MILEAGE [KM]: 20451; POWER [PS]: 105; GROSS WEIGHT [KG]: 4300; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 195 R 14; REAR TYRE SIZE: 195 R 14; COLOUR: WEIß; WHEELBASE: 2650; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 2100X1495X500; MAX PAYLOAD [KG]: 1790; EMISSION CLASS: EURO 2
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-used dishwasher winterhalter

sale from location bakery USED DISHWASHER WINTERHALTER SALE FROM LOCATION BAKERY
Vendedor: Heim Bäckereitechnik
Año de construcción: usado
Precio: 53.900 €
Ubicación: Land-; mileage [km]: 38625; power [ps]: 326; gross weight [kg]: 18000; transmission: mechanisch; front tyre size: 13r22.5; rear tyre size: 13r22.5; accessories: abs, bordcomputer, differentialsperre, tempomat; colour: weiß; wheelbase: 3900; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 4600x2380x650; max payload [kg]: 7800; emission class: euro 4 ; MILEAGE [KM]: 38625; POWER [PS]: 326; GROSS WEIGHT [KG]: 18000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 13R22.5; REAR TYRE SIZE: 13R22.5; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, TEMPOMAT; COLOUR: WEIß; WHEELBASE: 3900; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 4600X2380X650; MAX PAYLOAD [KG]: 7800; EMISSION CLASS: EURO 4
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 400 €
Ubicación: Land-2 stitching heads electr. stand model 2 STITCHING HEADS ELECTR. STAND MODEL
Vendedor: Pardon Graphische Maschinen & Service GmbH
Año de construcción: usado
Precio: 54.900 €
Ubicación: Land-; mileage [km]: 26000; power [ps]: 326; gross weight [kg]: 18000; transmission: mechanisch; front tyre size: 13r22.5; rear tyre size: 13r22.5; accessories: abs, bordcomputer, differentialsperre, tempomat; colour: weiß; wheelbase: 3900; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 4600x2380x650; max payload [kg]: 7800; emission class: euro 4 ; MILEAGE [KM]: 26000; POWER [PS]: 326; GROSS WEIGHT [KG]: 18000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 13R22.5; REAR TYRE SIZE: 13R22.5; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, TEMPOMAT; COLOUR: WEIß; WHEELBASE: 3900; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 4600X2380X650; MAX PAYLOAD [KG]: 7800; EMISSION CLASS: EURO 4
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-spreader pad width 1810 mm ex miner dung-and compost spreaders m 92 sg,.
with 2 scatter shaft diameter approx. 520 mm. used part, bearing i.o.

more parts available.

-jacobis local, environmental & green care technology-
pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
 SPREADER PAD WIDTH 1810 MM EX MINER DUNG-AND COMPOST SPREADERS M 92 SG,. WITH 2 SCATTER SHAFT DIAMETER APPROX. 520 MM. USED PART, BEARING I.O. MORE PARTS AVAILABLE. -JACOBIS LOCAL, ENVIRONMENTAL & GREEN CARE TECHNOLOGY- PRE-OWNED EQUIPMENT & SPORTS SQUARE CARE, GARDEN & LANDSCAPE CONSTRUCTION, CEMETERY TECHNOLOGY & WINTER MAINTENANCE, REVERSING OPERATIONS & DECOMMISSIONING, ENVIRONMENTAL CARE, MOTORS AND MORE...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Precio: 55.900 €
Ubicación: Land-; mileage [km]: 33140; power [ps]: 326; gross weight [kg]: 18000; transmission: mechanisch; front tyre size: 13r22.5; rear tyre size: 13r22.5; accessories: abs, bordcomputer, differentialsperre, tempomat; colour: weiß; wheelbase: 3900; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 4600x2380x650; max payload [kg]: 7800; emission class: euro 4 ; MILEAGE [KM]: 33140; POWER [PS]: 326; GROSS WEIGHT [KG]: 18000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 13R22.5; REAR TYRE SIZE: 13R22.5; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, TEMPOMAT; COLOUR: WEIß; WHEELBASE: 3900; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 4600X2380X650; MAX PAYLOAD [KG]: 7800; EMISSION CLASS: EURO 4
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 2.900 €
Ubicación: Land-brand: reichmann
type: esm
description: reichmann ski grinding machine is used. grinding wheel width 170 mm with feed and wet grinding device (pump + water base). machine is located in a very clean condition. the operating instruction sheet is included.
shipping charges possible.

: �2.900,00 ⧠25a differential taxation (no vat id possible!)

87742 apfeltrach, visit is at any time possible and desirable, for questions, andreas wiã?miller is available under the following telephone number: 0160/8037872 at your disposal. 
the goods are sold as seen and tested exclusively for commercial purposes, without any guarantee and warranty! 
 BRAND: REICHMANN TYPE: ESM DESCRIPTION: REICHMANN SKI GRINDING MACHINE IS USED. GRINDING WHEEL WIDTH 170 MM WITH FEED AND WET GRINDING DEVICE (PUMP + WATER BASE). MACHINE IS LOCATED IN A VERY CLEAN CONDITION. THE OPERATING INSTRUCTION SHEET IS INCLUDED. SHIPPING CHARGES POSSIBLE. : &ACIRC;?&NOT;2.900,00 &ACIRC;&SECT; 25A DIFFERENTIAL TAXATION (NO VAT ID POSSIBLE!) 87742 APFELTRACH, VISIT IS AT ANY TIME POSSIBLE AND DESIRABLE, FOR QUESTIONS, ANDREAS WI&ATILDE;?MILLER IS AVAILABLE UNDER THE FOLLOWING TELEPHONE NUMBER: 0160/8037872 AT YOUR DISPOSAL. THE GOODS ARE SOLD AS SEEN AND TESTED EXCLUSIVELY FOR COMMERCIAL PURPOSES, WITHOUT ANY GUARANTEE AND WARRANTY!
Vendedor: AW Handels GmbH
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; mileage [km]: 500000; power [ps]: 480; gross weight [kg]: 26000; transmission: mechanisch; accessories: abs, differentialsperre, klimaanlage, tempomat, ets - eletronische traktionskontrolle; colour: blau; wheelbase: 3900; max payload [kg]: 14000; emission class: euro 3; cabin: schlafkabine ; MILEAGE [KM]: 500000; POWER [PS]: 480; GROSS WEIGHT [KG]: 26000; TRANSMISSION: MECHANISCH; ACCESSORIES: ABS, DIFFERENTIALSPERRE, KLIMAANLAGE, TEMPOMAT, ETS - ELETRONISCHE TRAKTIONSKONTROLLE; COLOUR: BLAU; WHEELBASE: 3900; MAX PAYLOAD [KG]: 14000; EMISSION CLASS: EURO 3; CABIN: SCHLAFKABINE
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-dismantled entrance tower of a defunct DISMANTLED ENTRANCE TOWER OF A DEFUNCT "PRAKTIKER" RETAIL FACILITY. POSSIBLE FUTURE USE: AS EXHIBITION HALL, BUILDING ENTRANCE, OFFICE BUILDING, WINTER GARDEN AND MUCH MORE. APPROXIMATE DIMENSIONS: FLOOR SURFACE: APPROX. 152 SQUARE METERS, THE FOOTPRINT OF THE ENTRANCE TOWER HAS THE SHAPE OF AN IRREGULAR PENTAGON. TOWER LENGTH: APPROX. 12.30 METERS CLEAR INTERNAL LENGTH. TOWER WIDTH: APPROX. 12.30 METERS CLEAR INNER WIDTH. TOWER HEIGHT: APPROX. 16.45 METERS TOTAL HEIGHT FROM TERRAIN. ........ HEIGHT: APPROX. 13,45 METERS ROOF LEVEL FROM TERRAIN. ........ HEIGHT: APPROX. 12,50 METERS CLEAR HEIGHT MEASURED FROM THE FLOOR. LIVE LOAD ASSUMTION: REGULAR SNOW LOAD ACCORDING TO SNOW LOAD ZONE II (ELEVATION 400 M) S = 0,75 KN/SQM. STRUCTURAL STEEL WORK: THE LOAD-BEARING STRUCTURE OF THE TOWER IS COMPOSED OF A PRIMED, COATED, BOLTED STEEL FRAME CONSTRUCTION MADE OF HOT-ROLLED (HEB 240) EUROPEAN STANDARD I-SECTIONS (STEEL GRADE ST 37). THE CLADDING IS ATTACHED TO THE STEEL CONSTRUCTION AS POSTS AND TRANSOMS FROM THE INSIDE OF THE TOWER. THREE HORIZONTAL STEEL FRAMES ARE INSTALLED BELOW THE ROOF SURFACE. TRANSMISSION OF THE WIND LOADS VIA THE VERTICAL STEEL COLUMNS. THE ROOF LEVEL IS IT DESIGNED AS A "DISC". DIAGONAL BRACINGS ARE INCORPORATED IN THE FACADES OF THE 4 EXTERIOR WALL SURFACES. THROUGH THIS DIAGONAL BRACINGS, THE WIND FORCES ARE TRANSFERRED TO THE BASE DISC MADE OF REINFORCED CONCRETE STRIP FOUNDATIONS. ROOF: THE ROOFING CONSISTS OF TRAPEZOIDAL STEEL BEARING SHELLS (HOESCH TYPE E 100-0.88 M) TOPED WITH THERMAL INSULATION (MINERAL FIBER) AND A WATER-BEARING PVC MEMBRANE WHICH WAS DISPOSED OF DURING DECONSTRUCTION. FACADE: THE FACADE CLADDING (OF THE 4 EXTERNAL WALL SURFACES CONSIST OF DOUBLE GLAZING WITH ARGON GAS FILLING) IS ATTACHED TO POSTS ON THE INSIDE OF THE TOWER STRUCTURE. FACILITIES: 2 DOUBLE ELECTRIC SLIDING DOORS WITH CANOPIES, ONE SINGLE GLAZED DOOR, 2 RADIATORS, VARIOUS LIGHT FITTINGS. NOTE: BACK SIDE FACADE IS MISSING BECAUSE THE "MAIN ENTRANCE TOWER" WAS ADED TO AN EXISTING HARDWARE STORE. FORMER LOCATION: ERIAGSTRASSE 30, D- 85053 INGOLSTADT, BAVARIA. AVAILABILITY: THE MAIN ENTRANCE TOWER WAS DISASSEMBLED AND PACKAGED BY PROFESSIONAL FITTERS AND CAN BE PICKED UP FROM STORAGE YARD. DOCUMENTATION: THE ORIGINAL STRUCTURAL DESIGN CALCULATIONS AND DESIGN DRAWINGS ARE AVAILABLE. NET PRICE EX YARD: UPON WRITTEN REQUEST WITH COMPLETE COMPANY DATA OF PROSPECTIVE BUYER.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Precio: 69.900 €
Ubicación: Land-; mileage [km]: 12900; power [ps]: 150; gross weight [kg]: 9300; transmission: mechanisch; front tyre size: 365 / 80 r 20; rear tyre size: 365 / 80 r 20; accessories: abs, differentialsperre, klimaanlage; colour: weiß; wheelbase: 2700; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 7300x2354x1460; max payload [kg]: 2843; emission class: euro 5 ; MILEAGE [KM]: 12900; POWER [PS]: 150; GROSS WEIGHT [KG]: 9300; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 365 / 80 R 20; REAR TYRE SIZE: 365 / 80 R 20; ACCESSORIES: ABS, DIFFERENTIALSPERRE, KLIMAANLAGE; COLOUR: WEIß; WHEELBASE: 2700; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 7300X2354X1460; MAX PAYLOAD [KG]: 2843; EMISSION CLASS: EURO 5
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-silo spreader attachment for multicar, winter services, municipal equipment

manufacturer: kif kommunaltechnik repair manufacturing gmbh
year of construction: 2004
capacity: 800 l
 SILO SPREADER ATTACHMENT FOR MULTICAR, WINTER SERVICES, MUNICIPAL EQUIPMENT MANUFACTURER: KIF KOMMUNALTECHNIK REPAIR MANUFACTURING GMBH YEAR OF CONSTRUCTION: 2004 CAPACITY: 800 L
Vendedor: Maschinenhandel Nord
Año de construcción: usado
Precio: 27.900 €
Ubicación: Land-; mileage [km]: 72500; power [ps]: 177; gross weight [kg]: 10500; transmission: mechanisch; front tyre size: 10r22.5; rear tyre size: 10r22.5; accessories: abs, differentialsperre, tempomat; colour: weiß; wheelbase: 3260; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 4000x2300x400; max payload [kg]: 4155; emission class: euro 3 ; MILEAGE [KM]: 72500; POWER [PS]: 177; GROSS WEIGHT [KG]: 10500; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 10R22.5; REAR TYRE SIZE: 10R22.5; ACCESSORIES: ABS, DIFFERENTIALSPERRE, TEMPOMAT; COLOUR: WEIß; WHEELBASE: 3260; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 4000X2300X400; MAX PAYLOAD [KG]: 4155; EMISSION CLASS: EURO 3
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-winterhalter mtr basket transport dishwasher 2 mm () lr
-new device that only runs flushing
-manufacturer: winterhalter restaurateur gmbh
-type: mtr 2-mm()lr
-year: 2014
2-tank engine mm according to din 10510
-consisting of main irrigation zone (m) and rinsing zone (m)
-rinsing performance: 50/75/120 baskets per hour
-pass direction: left--> right
-electrical connection: 400v 3n 50 hz
-no main switch with emergency running program
-1 emergency stop switch
-electronic control with multifunction touch screen
(instructions available)
-exhaust air channel with fan
-water inlet temperature 10-20 â° c
-with special program for glasses
-no dry zone
-interface to the fehlersensierung of an external water purification and dispensing system
-preparation for a table on the outlet side connection
-triple rinse area with temperature levels
-with rear panel cover
-working height 900 mm
-machine dimensions: l x w x h: 1,575 mm x 800 mm x 1,770 mm
-shipping in a wooden box, dimensions: l x w x h 1.800 mm x 900 mm x 2,100 mm
-shipping costs â?¬200 WINTERHALTER MTR BASKET TRANSPORT DISHWASHER 2 MM () LR -NEW DEVICE THAT ONLY RUNS FLUSHING -MANUFACTURER: WINTERHALTER RESTAURATEUR GMBH -TYPE: MTR 2-MM()LR -YEAR: 2014 2-TANK ENGINE MM ACCORDING TO DIN 10510 -CONSISTING OF MAIN IRRIGATION ZONE (M) AND RINSING ZONE (M) -RINSING PERFORMANCE: 50/75/120 BASKETS PER HOUR -PASS DIRECTION: LEFT--> RIGHT -ELECTRICAL CONNECTION: 400V 3N 50 HZ -NO MAIN SWITCH WITH EMERGENCY RUNNING PROGRAM -1 EMERGENCY STOP SWITCH -ELECTRONIC CONTROL WITH MULTIFUNCTION TOUCH SCREEN (INSTRUCTIONS AVAILABLE) -EXHAUST AIR CHANNEL WITH FAN -WATER INLET TEMPERATURE 10-20 &ACIRC;&DEG; C -WITH SPECIAL PROGRAM FOR GLASSES -NO DRY ZONE -INTERFACE TO THE FEHLERSENSIERUNG OF AN EXTERNAL WATER PURIFICATION AND DISPENSING SYSTEM -PREPARATION FOR A TABLE ON THE OUTLET SIDE CONNECTION -TRIPLE RINSE AREA WITH TEMPERATURE LEVELS -WITH REAR PANEL COVER -WORKING HEIGHT 900 MM -MACHINE DIMENSIONS: L X W X H: 1,575 MM X 800 MM X 1,770 MM -SHIPPING IN A WOODEN BOX, DIMENSIONS: L X W X H 1.800 MM X 900 MM X 2,100 MM -SHIPPING COSTS &ACIRC;?&NOT;200
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: 69.900 €
Ubicación: Land-; mileage [km]: 12900; power [ps]: 150; gross weight [kg]: 9300; transmission: mechanisch; front tyre size: 335 / 80 r 20; rear tyre size: 335 / 80 r 20; accessories: abs, differentialsperre, klimaanlage; colour: weiß; wheelbase: 2700; suspension type: blatt/blatt; max payload [kg]: 2843; emission class: euro 5 ; MILEAGE [KM]: 12900; POWER [PS]: 150; GROSS WEIGHT [KG]: 9300; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 335 / 80 R 20; REAR TYRE SIZE: 335 / 80 R 20; ACCESSORIES: ABS, DIFFERENTIALSPERRE, KLIMAANLAGE; COLOUR: WEIß; WHEELBASE: 2700; SUSPENSION TYPE: BLATT/BLATT; MAX PAYLOAD [KG]: 2843; EMISSION CLASS: EURO 5
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-pirn winter for alluminium spools
 PIRN WINTER FOR ALLUMINIUM SPOOLS
Vendedor: SERVICES FOR INDUSTRY SAGL
Año de construcción: usado
Precio: 650 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-sales hall of a nursery which is to be dismantled soon. future use: suitable as a greenhouse, winter garden etc. structural steel work: hot-dip galvanized twin-span steel construction. 
foundation: on reinforced concrete spot / stripe - foundations.  

dimensions: length of the halls: 32.00 m; longitudinal grid: 4,8 + 6 + 3 + 6 + 6 + 5.83 m; 
width of the hall: 22.00 m (11,00 m + 11.00 m); 
height: 3.56 m under the strap. 
eaves height: 4,00 m eaves edge/side height; 
first height: 6.60 m height of the building; 
    
roof: alutherm sandwich roof panels and translucent polycarbonate polycarbonate. 

wall: insulating glass elements (a side is missing because the hall was later built); pediment from transparent hollow chamber panels / double-walled. 

facilities: main entrance with automatic doors in gable wall; 
more sliding door in the side; electrically operated vent flaps; 
  
location: lower saxony, germany. visit by appointment. 
 
availability: to be reduced until end of 2018. 
 
net price: against bid for removal by the buyer or by our fitters.  SALES HALL OF A NURSERY WHICH IS TO BE DISMANTLED SOON. FUTURE USE: SUITABLE AS A GREENHOUSE, WINTER GARDEN ETC. STRUCTURAL STEEL WORK: HOT-DIP GALVANIZED TWIN-SPAN STEEL CONSTRUCTION. FOUNDATION: ON REINFORCED CONCRETE SPOT / STRIPE - FOUNDATIONS. DIMENSIONS: LENGTH OF THE HALLS: 32.00 M; LONGITUDINAL GRID: 4,8 + 6 + 3 + 6 + 6 + 5.83 M; WIDTH OF THE HALL: 22.00 M (11,00 M + 11.00 M); HEIGHT: 3.56 M UNDER THE STRAP. EAVES HEIGHT: 4,00 M EAVES EDGE/SIDE HEIGHT; FIRST HEIGHT: 6.60 M HEIGHT OF THE BUILDING; ROOF: ALUTHERM SANDWICH ROOF PANELS AND TRANSLUCENT POLYCARBONATE POLYCARBONATE. WALL: INSULATING GLASS ELEMENTS (A SIDE IS MISSING BECAUSE THE HALL WAS LATER BUILT); PEDIMENT FROM TRANSPARENT HOLLOW CHAMBER PANELS / DOUBLE-WALLED. FACILITIES: MAIN ENTRANCE WITH AUTOMATIC DOORS IN GABLE WALL; MORE SLIDING DOOR IN THE SIDE; ELECTRICALLY OPERATED VENT FLAPS; LOCATION: LOWER SAXONY, GERMANY. VISIT BY APPOINTMENT. AVAILABILITY: TO BE REDUCED UNTIL END OF 2018. NET PRICE: AGAINST BID FOR REMOVAL BY THE BUYER OR BY OUR FITTERS.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-rinsing time: 15min/batch, tank volume: 125l, rinsing basket dimensions: 1260x700mm, insertion height: 830mm, connected load: 18kw, length: 850mm, width: 1380mm, height: 1770mm.  RINSING TIME: 15MIN/BATCH, TANK VOLUME: 125L, RINSING BASKET DIMENSIONS: 1260X700MM, INSERTION HEIGHT: 830MM, CONNECTED LOAD: 18KW, LENGTH: 850MM, WIDTH: 1380MM, HEIGHT: 1770MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2000 x 800 x 600 mm<br/>description: the air curtain is about 4 years old, little used only in the winter, has been technically checked and is functional. WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 800 X 600 MM
DESCRIPTION: THE AIR CURTAIN IS ABOUT 4 YEARS OLD, LITTLE USED ONLY IN THE WINTER, HAS BEEN TECHNICALLY CHECKED AND IS FUNCTIONAL.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 used liebherr betomix 2.0 s, built in 1991, power ca. 80 cbm / h, liebherr mixers ze 2000/3000, scrapers liebherr lsa 20 / 37, 2 pcs. 120 t double chamber silo, full steel construction with winter enclosure, control container complete with plc liebherr, zustazmittelcontainer with 4 containers and pumps. 1 USED LIEBHERR BETOMIX 2.0 S, BUILT IN 1991, POWER CA. 80 CBM / H, LIEBHERR MIXERS ZE 2000/3000, SCRAPERS LIEBHERR LSA 20 / 37, 2 PCS. 120 T DOUBLE CHAMBER SILO, FULL STEEL CONSTRUCTION WITH WINTER ENCLOSURE, CONTROL CONTAINER COMPLETE WITH PLC LIEBHERR, ZUSTAZMITTELCONTAINER WITH 4 CONTAINERS AND PUMPS.
Vendedor: GROMITEC
Año de construcción: usado
Precio: 69.900 €
Ubicación: Land-; power [ps]: 150; gross weight [kg]: 9300 ; POWER [PS]: 150; GROSS WEIGHT [KG]: 9300
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-winter under table saw cutmax 600 (as new!)
-cutting height 200 x 200 mm
-table size 1150 x 660 mm
-saw blades 㸠600 mm
-engine 10 kw / 400 v
-speed 2400 rpm
-cutting speed is 40 cycles/min.
-compressed air connection 8 bar
-suction nozzle 㸠120 mm
-safety two hand control
-ce conformity
-includes 1.5 m roll train left and right
-dimensions l = 1360,b = 900, h = 1450 mm
-weight 560 kg
year of build 2016
 WINTER UNDER TABLE SAW CUTMAX 600 (AS NEW!) -CUTTING HEIGHT 200 X 200 MM -TABLE SIZE 1150 X 660 MM -SAW BLADES &ATILDE;&CEDIL; 600 MM -ENGINE 10 KW / 400 V -SPEED 2400 RPM -CUTTING SPEED IS 40 CYCLES/MIN. -COMPRESSED AIR CONNECTION 8 BAR -SUCTION NOZZLE &ATILDE;&CEDIL; 120 MM -SAFETY TWO HAND CONTROL -CE CONFORMITY -INCLUDES 1.5 M ROLL TRAIN LEFT AND RIGHT -DIMENSIONS L = 1360,B = 900, H = 1450 MM -WEIGHT 560 KG YEAR OF BUILD 2016
Vendedor: Maschinendrehpunkt
Año de construcción: usado
Ubicación: Land-cutting diameter:120 mm<br/>cutting range min.:siehe schnittdiagramm mm<br/>saw blade diameter:400 mm<br/>cutting lenght max.:5250 mm<br/>swivelling range:45° bis 90° grad<br/>total power requirement:2 x 3,5 ps 380/220 v 50 hz <br/>dimensions of the machine ca.:6000 x 1000 x 1600 mm<br/>weight of the machine ca.:800 kg<br/><br/>manufacturer\'s description:  with 400 saw blades, a wide range of alu or pvc profile systems can be machined. simple operation, highest precision and reliability make the dgl particularly attractive for fly screen construction and window construction. in the wood area, the saw is used in furniture construction and interior fittings for the cutting of various slats.  application examples: window, door, facade, winter garden, insect protection profiles aluminum, pvc, pvc-aluminum, wood, wood-aluminum  for this purpose, we have used precise and efficient movement technology: ball bearing bushings for the length adjustment, suspension of the swinging units for the comfortable and safe angle adjustment between 45 ° and 90 °. the length and angle adjustment is done manually. more operator convenience and increased performance are achieved with a length display and a pneumatic swivel device. a wide range of profile systems can be used with 400 saw blades.  as follows: -manual length and angle adjustment -saw blade Ø 400 mm -extremely stable machine bed -complete encircling of the guide bushes around the guide shafts of the saw head -chardened guide shafts - swivel axle mounted on both sides - operation manual - adjustable saw blade - 2 x hor. clamping cylinder pneumatically height adjustable - 2 x vertical clamping units, mechanically adjustable CUTTING DIAMETER:120 MM
CUTTING RANGE MIN.:SIEHE SCHNITTDIAGRAMM MM
SAW BLADE DIAMETER:400 MM
CUTTING LENGHT MAX.:5250 MM
SWIVELLING RANGE:45° BIS 90° GRAD
TOTAL POWER REQUIREMENT:2 X 3,5 PS 380/220 V 50 HZ
DIMENSIONS OF THE MACHINE CA.:6000 X 1000 X 1600 MM
WEIGHT OF THE MACHINE CA.:800 KG

MANUFACTURER\'S DESCRIPTION: WITH 400 SAW BLADES, A WIDE RANGE OF ALU OR PVC PROFILE SYSTEMS CAN BE MACHINED. SIMPLE OPERATION, HIGHEST PRECISION AND RELIABILITY MAKE THE DGL PARTICULARLY ATTRACTIVE FOR FLY SCREEN CONSTRUCTION AND WINDOW CONSTRUCTION. IN THE WOOD AREA, THE SAW IS USED IN FURNITURE CONSTRUCTION AND INTERIOR FITTINGS FOR THE CUTTING OF VARIOUS SLATS. APPLICATION EXAMPLES: WINDOW, DOOR, FACADE, WINTER GARDEN, INSECT PROTECTION PROFILES ALUMINUM, PVC, PVC-ALUMINUM, WOOD, WOOD-ALUMINUM FOR THIS PURPOSE, WE HAVE USED PRECISE AND EFFICIENT MOVEMENT TECHNOLOGY: BALL BEARING BUSHINGS FOR THE LENGTH ADJUSTMENT, SUSPENSION OF THE SWINGING UNITS FOR THE COMFORTABLE AND SAFE ANGLE ADJUSTMENT BETWEEN 45 ° AND 90 °. THE LENGTH AND ANGLE ADJUSTMENT IS DONE MANUALLY. MORE OPERATOR CONVENIENCE AND INCREASED PERFORMANCE ARE ACHIEVED WITH A LENGTH DISPLAY AND A PNEUMATIC SWIVEL DEVICE. A WIDE RANGE OF PROFILE SYSTEMS CAN BE USED WITH 400 SAW BLADES. AS FOLLOWS: -MANUAL LENGTH AND ANGLE ADJUSTMENT -SAW BLADE Ø 400 MM -EXTREMELY STABLE MACHINE BED -COMPLETE ENCIRCLING OF THE GUIDE BUSHES AROUND THE GUIDE SHAFTS OF THE SAW HEAD -CHARDENED GUIDE SHAFTS - SWIVEL AXLE MOUNTED ON BOTH SIDES - OPERATION MANUAL - ADJUSTABLE SAW BLADE - 2 X HOR. CLAMPING CYLINDER PNEUMATICALLY HEIGHT ADJUSTABLE - 2 X VERTICAL CLAMPING UNITS, MECHANICALLY ADJUSTABLE
Vendedor: SALING Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-wiedenmann front sickle mower working width 2100 mm, rear discharge.
air-filled tires, dome triangle kat. 0., external nipples for blade bearings.
for pto 2,000 1/min in clockwise direction.

other mowers for various brands in stock!

- jodau environmental & green care technology-
pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...  WIEDENMANN FRONT SICKLE MOWER WORKING WIDTH 2100 MM, REAR DISCHARGE. AIR-FILLED TIRES, DOME TRIANGLE KAT. 0., EXTERNAL NIPPLES FOR BLADE BEARINGS. FOR PTO 2,000 1/MIN IN CLOCKWISE DIRECTION. OTHER MOWERS FOR VARIOUS BRANDS IN STOCK! - JODAU ENVIRONMENTAL & GREEN CARE TECHNOLOGY- PRE-OWNED EQUIPMENT & SPORTS SQUARE CARE, GARDEN & LANDSCAPE CONSTRUCTION, CEMETERY TECHNOLOGY & WINTER MAINTENANCE, REVERSING OPERATIONS & DECOMMISSIONING, ENVIRONMENTAL CARE, MOTORS AND MORE...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-pressure:006,3 t<br/>throat:180 mm<br/>stroke:350 mm<br/>distance table/ram, max. stroke up, adjustment up:500 mm<br/>table surface area:470 x 340 mm<br/>hole in the table:75 mm<br/>table height over floor:940 mm<br/>ram surface:40 mm<br/>oil volume: l<br/>power requirement:3,0 kw<br/>weight:1,2 t<br/>dimensions (wxdxh):1,2 x 1,2 x 2,5 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>conrollable dependant on pressure/time and way: <br/>two-hand operation: <br/><br/> PRESSURE:006,3 T
THROAT:180 MM
STROKE:350 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:500 MM
TABLE SURFACE AREA:470 X 340 MM
HOLE IN THE TABLE:75 MM
TABLE HEIGHT OVER FLOOR:940 MM
RAM SURFACE:40 MM
OIL VOLUME: L
POWER REQUIREMENT:3,0 KW
WEIGHT:1,2 T
DIMENSIONS (WXDXH):1,2 X 1,2 X 2,5 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
CONROLLABLE DEPENDANT ON PRESSURE/TIME AND WAY:
TWO-HAND OPERATION:

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-used radiators for water cooled industrial engines - for example iseki isuzu, komatsu, kubota, lombardini, perkins, shibaura, yanmar etc.

diesel engines 1-6 cyl., various products: deutz, daedong, farymann, hatz, iseki, isuzu, komatsu, kubota, lombardini, perkins, shibaura, ruggerini, yanmar etc. 
capacity of 4,5-100 kw, used partly as new.  
gasoline engines: 1-2 cylinder 3-15 kw b & s, honda, kohler, robin, dsey wisconsin. various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.

       - jodau local, environmental & green care technology-
second hand equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

 USED RADIATORS FOR WATER COOLED INDUSTRIAL ENGINES - FOR EXAMPLE ISEKI ISUZU, KOMATSU, KUBOTA, LOMBARDINI, PERKINS, SHIBAURA, YANMAR ETC. DIESEL ENGINES 1-6 CYL., VARIOUS PRODUCTS: DEUTZ, DAEDONG, FARYMANN, HATZ, ISEKI, ISUZU, KOMATSU, KUBOTA, LOMBARDINI, PERKINS, SHIBAURA, RUGGERINI, YANMAR ETC. CAPACITY OF 4,5-100 KW, USED PARTLY AS NEW. GASOLINE ENGINES: 1-2 CYLINDER 3-15 KW B & S, HONDA, KOHLER, ROBIN, DSEY WISCONSIN. VARIOUS COOLER, STARTER, ALTERNATORS, AND MUFFLERS IN STOCK, VARIOUS HYDRAULIC PUMPS AND HYDRAULIC MOTORS. - JODAU LOCAL, ENVIRONMENTAL & GREEN CARE TECHNOLOGY- SECOND HAND EQUIPMENT & SPORTS SQUARE CARE, GARDEN & LANDSCAPE CONSTRUCTION, CEMETERY TECHNOLOGY & WINTER MAINTENANCE, REVERSING OPERATIONS & DECOMMISSIONING, ENVIRONMENTAL CARE, MOTORS AND MORE...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-bakery dissolution - sale of various bakery machines and equipment
sale from location

if you are interested we will send you a price list of the machines that are still available  BAKERY DISSOLUTION - SALE OF VARIOUS BAKERY MACHINES AND EQUIPMENT SALE FROM LOCATION IF YOU ARE INTERESTED WE WILL SEND YOU A PRICE LIST OF THE MACHINES THAT ARE STILL AVAILABLE
Vendedor: Backservice Gaux GmbH
Año de construcción: usado
Ubicación: Land-age 2001
stapling machine
saddle and block stitching
2 stitching heads
electr. drive
food switch
incl. substructure
ref: wi180211a

please ask for price.

we ship and install worldwide! AGE 2001 STAPLING MACHINE SADDLE AND BLOCK STITCHING 2 STITCHING HEADS ELECTR. DRIVE FOOD SWITCH INCL. SUBSTRUCTURE REF: WI180211A PLEASE ASK FOR PRICE. WE SHIP AND INSTALL WORLDWIDE!
Vendedor: Altmann Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-reiser mowing container sch 125, trailer with mower 130 cm, universal device for mowing/mulching and simultaneous collecting of grass, leaves, horse droppings etc. heavy, sturdy design: mulcher with blade and adjustable support roller, container 2.5 m³.

more mowing container of same design and others available!

-jacobis local, environmental & green care technology-
pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
  REISER MOWING CONTAINER SCH 125, TRAILER WITH MOWER 130 CM, UNIVERSAL DEVICE FOR MOWING/MULCHING AND SIMULTANEOUS COLLECTING OF GRASS, LEAVES, HORSE DROPPINGS ETC. HEAVY, STURDY DESIGN: MULCHER WITH BLADE AND ADJUSTABLE SUPPORT ROLLER, CONTAINER 2.5 M³. MORE MOWING CONTAINER OF SAME DESIGN AND OTHERS AVAILABLE! -JACOBIS LOCAL, ENVIRONMENTAL & GREEN CARE TECHNOLOGY- PRE-OWNED EQUIPMENT & SPORTS SQUARE CARE, GARDEN & LANDSCAPE CONSTRUCTION, CEMETERY TECHNOLOGY & WINTER MAINTENANCE, REVERSING OPERATIONS & DECOMMISSIONING, ENVIRONMENTAL CARE, MOTORS AND MORE...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Ubicación: Land-booklet maker nagel multinak s<br/>  <br/>  year 1996 - serial-no. 963816<br/>  2 stitching heads<br/>  24 size stitching heads<br/>  <br/>  -available immediately -<br/>  -can be inspect-<br/>  -on stock - can be test- BOOKLET MAKER NAGEL MULTINAK S

YEAR 1996 - SERIAL-NO. 963816
2 STITCHING HEADS
24 SIZE STITCHING HEADS

-AVAILABLE IMMEDIATELY -
-CAN BE INSPECT-
-ON STOCK - CAN BE TEST-
Vendedor: F1-TRADE GmbH
Año de construcción: usado
Ubicación: Land-booklet maker winterling km 17<br/>  <br/>  year 1986 - serial-no. 469<br/>  2 stitching heads<br/>  24 size stitching heads<br/>  <br/>  -available immediately -<br/>  -can be inspect-<br/>  -on stock - can be test- BOOKLET MAKER WINTERLING KM 17

YEAR 1986 - SERIAL-NO. 469
2 STITCHING HEADS
24 SIZE STITCHING HEADS

-AVAILABLE IMMEDIATELY -
-CAN BE INSPECT-
-ON STOCK - CAN BE TEST-
Vendedor: F1-TRADE GmbH
Año de construcción: usado
Ubicación: Land-lawn sweeper for pto 540 rpm, working width 180 cm, double sweeper roller system, hydraulic high dump, electrical. remote control acting on solenoid valves, ew 1 hydraulic connection required. tank contents approx. 3 m â³, rear axle 6 x frosted. drawbar adjustable in height, illumination device com. stvzo. machine is relatively little used, brushes and tin in good condition with paint defects inside the tank and signs of use. incl. operating instructions, parts list, and abe.

type same kugelmann kdh 150 (150 cm working width) also available and more with working widths from 90 to 170 cm.

-jacobis local, environmental & green care technology-
pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
 LAWN SWEEPER FOR PTO 540 RPM, WORKING WIDTH 180 CM, DOUBLE SWEEPER ROLLER SYSTEM, HYDRAULIC HIGH DUMP, ELECTRICAL. REMOTE CONTROL ACTING ON SOLENOID VALVES, EW 1 HYDRAULIC CONNECTION REQUIRED. TANK CONTENTS APPROX. 3 M &ACIRC;&SUP3;, REAR AXLE 6 X FROSTED. DRAWBAR ADJUSTABLE IN HEIGHT, ILLUMINATION DEVICE COM. STVZO. MACHINE IS RELATIVELY LITTLE USED, BRUSHES AND TIN IN GOOD CONDITION WITH PAINT DEFECTS INSIDE THE TANK AND SIGNS OF USE. INCL. OPERATING INSTRUCTIONS, PARTS LIST, AND ABE. TYPE SAME KUGELMANN KDH 150 (150 CM WORKING WIDTH) ALSO AVAILABLE AND MORE WITH WORKING WIDTHS FROM 90 TO 170 CM. -JACOBIS LOCAL, ENVIRONMENTAL & GREEN CARE TECHNOLOGY- PRE-OWNED EQUIPMENT & SPORTS SQUARE CARE, GARDEN & LANDSCAPE CONSTRUCTION, CEMETERY TECHNOLOGY & WINTER MAINTENANCE, REVERSING OPERATIONS & DECOMMISSIONING, ENVIRONMENTAL CARE, MOTORS AND MORE...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Precio: 23.900 €
Ubicación: Land-technische daten: - min. / max. kantendicke 0,4 - 3 mm<br/>- min. / max. werkstückhöhe 10 - 60 mm<br/>- min. werkstückbreite 80 mm<br/>- min. werkstücklänge 150 mm<br/>- motor vorschub 2,2 kw<br/>- stufenlose vorschubgeschwindigkeit 12/16/20 m/min.<br/>- schwenkbares bedienpult am maschineneinlauf in augenhöhe<br/>- beheiztes einlauflineal zur werkstückvorwärmung 0,12 kw<br/>- druckzone mit pneumatisch angetriebener hauptandruckrolle und nachruckrollen zur <br/>  verdichtung der leimfuge<br/>- zentral einstellbarer oberdruck<br/>- leimbecken teflon beschichtet für schmelzkleber-granulat, leistung 2,4 kw<br/>- leimangabe an das werkstück mittels leimrolle<br/>- elektronische temperaturregelung, arbeitstemperatur 180 - 200 cc<br/>- kettenvorschub<br/>- auflageteller für pvc und abs umleimer<br/>- pneumatische rollenkappung<br/>- kontrollampe für werkstückabstand - fügefräsaggregat mit 2 stück dia fügemesserköpfen<br/>  zum anfügen vor dem verleimteil, spindelverstellung vertikal,<br/>  elektropneumatische steuerung horizontal, 2 motoren je 1,8 kw , 200 hz, 12.000 u/min<br/>  (1 x gleich-, 1 x gegenlauf),max. spanabnahme / hub 3 mm - kappsägeaggregat für vorderen- und hinteren kantenüberstand.<br/>  hochpräzise linearführung.<br/>  2 motoren je 0,5 kw, 200 hz, 12.000 u/min<br/>  ziehender kappschnitt für hohe genauigkeit - bündig- und radiusfräsaggregat oben und unten<br/>  mit vertikaler und horizontaler tastung.<br/>  2 motoren je 0,75 kw, 200 hz, 12.000 u/min - formfräsaggregat (eckenkopieren) oben und unten, zum formfräsen von kopfkanten an postformingteilen <br/>  und eckenrunden von pvc-kanten. motor 0,75 kw, 200 hz, 12.000 u/min. - radiusziehklingenaggregat mit spänefangkasten<br/>  abtastung von oben, unten und seitlich<br/>  zum runden von vorgefrästen pvc-kanten. - flächenziehklingenaggregat<br/>  abtastung von oben, unten<br/>  zum abziehen des kleberrestes für eine saubere - schwabbelaggregat zum griffigmachen der kanten oben und unten.<br/>  2 motoren je 0,18 kw, 50 hz, 1400 u/min.<br/>  schräg- und höhenverstellbar - leistungsaufnahme gesamt 13,9 kw / 400 v<br/>- absaugstutzen 3 x fi 120 mm<br/>- druckluftanschluss 6 bar<br/>- abmessungen l=6130, b=1000, h=1600 mm<br/>- gewicht 2500 kg TECHNISCHE DATEN: - MIN. / MAX. KANTENDICKE 0,4 - 3 MM
- MIN. / MAX. WERKSTüCKHöHE 10 - 60 MM
- MIN. WERKSTüCKBREITE 80 MM
- MIN. WERKSTüCKLäNGE 150 MM
- MOTOR VORSCHUB 2,2 KW
- STUFENLOSE VORSCHUBGESCHWINDIGKEIT 12/16/20 M/MIN.
- SCHWENKBARES BEDIENPULT AM MASCHINENEINLAUF IN AUGENHöHE
- BEHEIZTES EINLAUFLINEAL ZUR WERKSTüCKVORWäRMUNG 0,12 KW
- DRUCKZONE MIT PNEUMATISCH ANGETRIEBENER HAUPTANDRUCKROLLE UND NACHRUCKROLLEN ZUR
  VERDICHTUNG DER LEIMFUGE
- ZENTRAL EINSTELLBARER OBERDRUCK
- LEIMBECKEN TEFLON BESCHICHTET FüR SCHMELZKLEBER-GRANULAT, LEISTUNG 2,4 KW
- LEIMANGABE AN DAS WERKSTüCK MITTELS LEIMROLLE
- ELEKTRONISCHE TEMPERATURREGELUNG, ARBEITSTEMPERATUR 180 - 200 CC
- KETTENVORSCHUB
- AUFLAGETELLER FüR PVC UND ABS UMLEIMER
- PNEUMATISCHE ROLLENKAPPUNG
- KONTROLLAMPE FüR WERKSTüCKABSTAND - FüGEFRäSAGGREGAT MIT 2 STüCK DIA FüGEMESSERKöPFEN
  ZUM ANFüGEN VOR DEM VERLEIMTEIL, SPINDELVERSTELLUNG VERTIKAL,
  ELEKTROPNEUMATISCHE STEUERUNG HORIZONTAL, 2 MOTOREN JE 1,8 KW , 200 HZ, 12.000 U/MIN
  (1 X GLEICH-, 1 X GEGENLAUF),MAX. SPANABNAHME / HUB 3 MM - KAPPSäGEAGGREGAT FüR VORDEREN- UND HINTEREN KANTENüBERSTAND.
  HOCHPRäZISE LINEARFüHRUNG.
  2 MOTOREN JE 0,5 KW, 200 HZ, 12.000 U/MIN
  ZIEHENDER KAPPSCHNITT FüR HOHE GENAUIGKEIT - BüNDIG- UND RADIUSFRäSAGGREGAT OBEN UND UNTEN
  MIT VERTIKALER UND HORIZONTALER TASTUNG.
  2 MOTOREN JE 0,75 KW, 200 HZ, 12.000 U/MIN - FORMFRäSAGGREGAT (ECKENKOPIEREN) OBEN UND UNTEN, ZUM FORMFRäSEN VON KOPFKANTEN AN POSTFORMINGTEILEN
  UND ECKENRUNDEN VON PVC-KANTEN. MOTOR 0,75 KW, 200 HZ, 12.000 U/MIN. - RADIUSZIEHKLINGENAGGREGAT MIT SPäNEFANGKASTEN
  ABTASTUNG VON OBEN, UNTEN UND SEITLICH
  ZUM RUNDEN VON VORGEFRäSTEN PVC-KANTEN. - FLäCHENZIEHKLINGENAGGREGAT
  ABTASTUNG VON OBEN, UNTEN
  ZUM ABZIEHEN DES KLEBERRESTES FüR EINE SAUBERE - SCHWABBELAGGREGAT ZUM GRIFFIGMACHEN DER KANTEN OBEN UND UNTEN.
  2 MOTOREN JE 0,18 KW, 50 HZ, 1400 U/MIN.
  SCHRäG- UND HöHENVERSTELLBAR - LEISTUNGSAUFNAHME GESAMT 13,9 KW / 400 V
- ABSAUGSTUTZEN 3 X FI 120 MM
- DRUCKLUFTANSCHLUSS 6 BAR
- ABMESSUNGEN L=6130, B=1000, H=1600 MM
- GEWICHT 2500 KG
Vendedor: Winter Holztechnik GmbH
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-technische daten:<br/> <br/>- 4 spaene-tonnen mit klemmbuegel 600 x 500 mm<br/>- reststaubgehalt: 0,1 mg/m3<br/>- loeschautomatik mit pulverlöschung<br/>- ein- / ausschalter<br/>- volumenstromueberwachung<br/>- druckdifferenzanzeige<br/>- leistungsaufnahme: 11,0 kw<br/>- netzspannung: 400 v / 50 hz /3 ph ~<br/>- stromaufnahme: 32 a<br/>- filterflaeche: 45,2 m2<br/>- 120 stück filterschläuche<br/>- filterregeneration: automatisch, pneumatisch jet-system<br/>- volumen-staubtonnen: 4 x 200 l ges. 800 liter<br/>- ansaugstutzen: 350 mm<br/>- volumenstrom: 8640 m3/h<br/>- unterdruck 3600 pa<br/>- max. schalldruckpegel 72 db (a)<br/>- abmessungen: l= 5470 mm, b= 1.100 mm, h= 2.500 mm<br/>- gewicht: 1100 kg TECHNISCHE DATEN:

- 4 SPAENE-TONNEN MIT KLEMMBUEGEL 600 X 500 MM
- RESTSTAUBGEHALT: 0,1 MG/M3
- LOESCHAUTOMATIK MIT PULVERLöSCHUNG
- EIN- / AUSSCHALTER
- VOLUMENSTROMUEBERWACHUNG
- DRUCKDIFFERENZANZEIGE
- LEISTUNGSAUFNAHME: 11,0 KW
- NETZSPANNUNG: 400 V / 50 HZ /3 PH ~
- STROMAUFNAHME: 32 A
- FILTERFLAECHE: 45,2 M2
- 120 STüCK FILTERSCHLäUCHE
- FILTERREGENERATION: AUTOMATISCH, PNEUMATISCH JET-SYSTEM
- VOLUMEN-STAUBTONNEN: 4 X 200 L GES. 800 LITER
- ANSAUGSTUTZEN: 350 MM
- VOLUMENSTROM: 8640 M3/H
- UNTERDRUCK 3600 PA
- MAX. SCHALLDRUCKPEGEL 72 DB (A)
- ABMESSUNGEN: L= 5470 MM, B= 1.100 MM, H= 2.500 MM
- GEWICHT: 1100 KG
Vendedor: Winter Holztechnik GmbH
Año de construcción: usado
Ubicación: Land-laser cutting machine manufacturer: plant prima power, laser rofin dc025

name: rapido 5 year: 2002

control: rml + (example program in the appendix with image of the part) belong to the system the suction, the cooling unit with attachment to the warm exhaust air control. (summer outside and winter inside to the hot company) 



the machine documentation and manuals are all still available, the system uses the complete existing

accessories (lenses, mirrors, nozzles, cleaning kit, safety glasses and other small parts) sells. 

also be bought the license for the programming station extra to do this, it's the program

radm ax2016 (5-axis machining) including 5 axis post processor. it is clarified with the manufacturer that the license without any problems

can be overridden to a new buyer.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  LASER CUTTING MACHINE MANUFACTURER: PLANT PRIMA POWER, LASER ROFIN DC025 NAME: RAPIDO 5 YEAR: 2002 CONTROL: RML + (EXAMPLE PROGRAM IN THE APPENDIX WITH IMAGE OF THE PART) BELONG TO THE SYSTEM THE SUCTION, THE COOLING UNIT WITH ATTACHMENT TO THE WARM EXHAUST AIR CONTROL. (SUMMER OUTSIDE AND WINTER INSIDE TO THE HOT COMPANY) THE MACHINE DOCUMENTATION AND MANUALS ARE ALL STILL AVAILABLE, THE SYSTEM USES THE COMPLETE EXISTING ACCESSORIES (LENSES, MIRRORS, NOZZLES, CLEANING KIT, SAFETY GLASSES AND OTHER SMALL PARTS) SELLS. ALSO BE BOUGHT THE LICENSE FOR THE PROGRAMMING STATION EXTRA TO DO THIS, IT'S THE PROGRAM RADM AX2016 (5-AXIS MACHINING) INCLUDING 5 AXIS POST PROCESSOR. IT IS CLARIFIED WITH THE MANUFACTURER THAT THE LICENSE WITHOUT ANY PROBLEMS CAN BE OVERRIDDEN TO A NEW BUYER. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-john deere 955 four-wheel-drive tractor, 25 kw / 34 hp 3-cylinder diesel engine, infinitely variable hydrostatic drive with work and strassenfahrgruppe, power steering, pto, rear, center, front.
lift rear and front, single lever control unit 2 x double, 4 ports ball head coupling (coupling optional)
original only 605 operating hours, with street-legal and operating instructions.
technically good condition, no winter service usage, no rust.
optionally with intermediate axle mower 180 cm or front mower 150 cm.
other attachments available.  JOHN DEERE 955 FOUR-WHEEL-DRIVE TRACTOR, 25 KW / 34 HP 3-CYLINDER DIESEL ENGINE, INFINITELY VARIABLE HYDROSTATIC DRIVE WITH WORK AND STRASSENFAHRGRUPPE, POWER STEERING, PTO, REAR, CENTER, FRONT. LIFT REAR AND FRONT, SINGLE LEVER CONTROL UNIT 2 X DOUBLE, 4 PORTS BALL HEAD COUPLING (COUPLING OPTIONAL) ORIGINAL ONLY 605 OPERATING HOURS, WITH STREET-LEGAL AND OPERATING INSTRUCTIONS. TECHNICALLY GOOD CONDITION, NO WINTER SERVICE USAGE, NO RUST. OPTIONALLY WITH INTERMEDIATE AXLE MOWER 180 CM OR FRONT MOWER 150 CM. OTHER ATTACHMENTS AVAILABLE.
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-technische daten: kreissäge:<br/>- schnittlänge / besäumlänge 2400 mm<br/>- max. sägeblattdurchmesser 315 mm<br/>- motorleistung 4,0 kw<br/>- vorritzaggregat 0,75 kw<br/>- drehzahl 4000 u/min.<br/>- schnitthöhe 90c/45 c 103 / 72 mm<br/>- vorritzsägeblatt durchmesser 120 mm<br/>- drehzahl ritzsägeblatt 8000 u/min.<br/>- max. schnittbreite am parallelanschlag 1400 mm<br/>- tischhöhe 860 mm<br/>- arbeitstisch 1450 x 650 mm<br/>- tischverbreiterung 800 x 880 mm<br/>- tischverlängerung 400 x 450 mm<br/>- formatschiebetisch 2540 x 350 mm<br/>- auslegertisch 640 x 1200 mm<br/>- längen- gehrungsanschlag eingezogen/ausgezogen 1900 mm/3500 mm fräse:<br/>- spindeldurchmesser 30 mm<br/>- auswechselbare frässpindel mk 4<br/>- motorleistung 5,5 kw <br/>- drehzahl 3000/4000/5000/6000/8000/10000 u/min.<br/>- spindelhub 175 mm<br/>- spindelschwenkung 90c bis 45c<br/>- max. einspannhöhe 125 mm<br/>- tischöffnung 270 mm<br/>- max. werkzeugdurchmesser versenkbar 260 mm<br/>- max. werkzeugdurchmesser über tisch 260 mm<br/>- fräsanschlag mit alu intergralanschlagbacken 350 x 155 mm - absaugstutzen 3 x 120 mm<br/>- spannung 400 v, 50 hz<br/>- verpackungsmasse l=1170, b=2000,h=1450 mm<br/> l=3290, b= 325, h=450 mm<br/>-gewicht 850 kg <br/>inklusive: - zentrales bedienpult an der vorderseite<br/>- parallelanschlag mit feineinstellung<br/>- auswechselbare frässpindel mk 4<br/>- vorritzaggregat mit sepatratem motor<br/>- integralanschlagbacken<br/>- niederhalter<br/>- besäumschuh TECHNISCHE DATEN: KREISSäGE:
- SCHNITTLäNGE / BESäUMLäNGE 2400 MM
- MAX. SäGEBLATTDURCHMESSER 315 MM
- MOTORLEISTUNG 4,0 KW
- VORRITZAGGREGAT 0,75 KW
- DREHZAHL 4000 U/MIN.
- SCHNITTHöHE 90C/45 C 103 / 72 MM
- VORRITZSäGEBLATT DURCHMESSER 120 MM
- DREHZAHL RITZSäGEBLATT 8000 U/MIN.
- MAX. SCHNITTBREITE AM PARALLELANSCHLAG 1400 MM
- TISCHHöHE 860 MM
- ARBEITSTISCH 1450 X 650 MM
- TISCHVERBREITERUNG 800 X 880 MM
- TISCHVERLäNGERUNG 400 X 450 MM
- FORMATSCHIEBETISCH 2540 X 350 MM
- AUSLEGERTISCH 640 X 1200 MM
- LäNGEN- GEHRUNGSANSCHLAG EINGEZOGEN/AUSGEZOGEN 1900 MM/3500 MM FRäSE:
- SPINDELDURCHMESSER 30 MM
- AUSWECHSELBARE FRäSSPINDEL MK 4
- MOTORLEISTUNG 5,5 KW
- DREHZAHL 3000/4000/5000/6000/8000/10000 U/MIN.
- SPINDELHUB 175 MM
- SPINDELSCHWENKUNG 90C BIS 45C
- MAX. EINSPANNHöHE 125 MM
- TISCHöFFNUNG 270 MM
- MAX. WERKZEUGDURCHMESSER VERSENKBAR 260 MM
- MAX. WERKZEUGDURCHMESSER üBER TISCH 260 MM
- FRäSANSCHLAG MIT ALU INTERGRALANSCHLAGBACKEN 350 X 155 MM - ABSAUGSTUTZEN 3 X 120 MM
- SPANNUNG 400 V, 50 HZ
- VERPACKUNGSMASSE L=1170, B=2000,H=1450 MM
L=3290, B= 325, H=450 MM
-GEWICHT 850 KG
INKLUSIVE: - ZENTRALES BEDIENPULT AN DER VORDERSEITE
- PARALLELANSCHLAG MIT FEINEINSTELLUNG
- AUSWECHSELBARE FRäSSPINDEL MK 4
- VORRITZAGGREGAT MIT SEPATRATEM MOTOR
- INTEGRALANSCHLAGBACKEN
- NIEDERHALTER
- BESäUMSCHUH
Vendedor: Winter Holztechnik GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more WINTER types: