40 ofertas

Año de construcción: usado
Ubicación: Land-machine specification

year: 2012 
control unit: unilog b6s 
robot: wittmann w737 

injection unit: .../750
screw diameter: 45 mm 
injection pressure: 2116 bar 
injection volume: 358 ccm 
shot capacity: 325 g 

clamping unit: tm 180/...
clamping force: 180 t 
platen size: 900 x 900 mm 
distance between tie bars: 570 x 520 mm 
mould height: 325 mm 
opening storke: 650 mm 
max.daylight: 975 mm 
ejector stroke: 200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,9 x 1,6x 2,2 m 
weight: 7.300 kg 

equipment:
- 4 x hotrunner controller
- 3 x pneumatic valve
- 1 x core pull
- accumulator MACHINE SPECIFICATION YEAR: 2012 CONTROL UNIT: UNILOG B6S ROBOT: WITTMANN W737 INJECTION UNIT: .../750 SCREW DIAMETER: 45 MM INJECTION PRESSURE: 2116 BAR INJECTION VOLUME: 358 CCM SHOT CAPACITY: 325 G CLAMPING UNIT: TM 180/... CLAMPING FORCE: 180 T PLATEN SIZE: 900 X 900 MM DISTANCE BETWEEN TIE BARS: 570 X 520 MM MOULD HEIGHT: 325 MM OPENING STORKE: 650 MM MAX.DAYLIGHT: 975 MM EJECTOR STROKE: 200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,9 X 1,6X 2,2 M WEIGHT: 7.300 KG EQUIPMENT: - 4 X HOTRUNNER CONTROLLER - 3 X PNEUMATIC VALVE - 1 X CORE PULL - ACCUMULATOR
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: mm<br/>injection shot weight in polysterol: g/ps<br/>closing pressure:2000 kn<br/>daylight:570 x 570 mm<br/>opening stroke:650 mm<br/>mould height - max./min.:500 mm  mm<br/>control:selogica <br/>daylight between platens - max.:1150 mm<br/>total power requirement:57,6  kw<br/>weight of the machine ca.:8,0 t<br/>dimensions of the machine ca.: m<br/><br/>the machine is equipped with horizontal injection unit and with a second injection unit in angular position  - lcd colour monitor, colour type  - selogica control unit - 1st injection unit (horizontal  2 colour)   screw diameter: 30 mm (highly wear resistant)   shot weight ps: 71 g - 2nd injection unit in angular position    screw diameter: 30 mm (highly wear resistant)   shot weight ps: 71 g equipment - advanced simultaneous fast movements with 3 pumps - technology step 2 servoregulated with 2 regulating pumps  - highly wear resistant plastification unit  - safety mould heating 16 a per heating circuit - electr. and hydr. drive  needle valve nozzle in the mould - min. mould opening increased to 500 mm - mould blow unit 1 with pressure reducer - 4 core pulls  - hydraulic accumulator - increased injection pressure - interface for robot - interface for tempering unit - interface for printer - interface for pc keyboard - 1 additional heating circuit for nozzle - 12 additional heating circuits mould - switch over to holding pressure k 1 - piezo charge amplifier - interface for dosing unit - interface for dosiing unit for injection aggregate 2 - interface vacuum control  - control vacuum - 6 free cooling circuits manual adjustable - arburg equipment packages no.: 1,2,3,5,6,7 - positon regulated screw for both injection units - special paintiing colour \ SCREW SIZE: MM
INJECTION SHOT WEIGHT IN POLYSTEROL: G/PS
CLOSING PRESSURE:2000 KN
DAYLIGHT:570 X 570 MM
OPENING STROKE:650 MM
MOULD HEIGHT - MAX./MIN.:500 MM MM
CONTROL:SELOGICA
DAYLIGHT BETWEEN PLATENS - MAX.:1150 MM
TOTAL POWER REQUIREMENT:57,6 KW
WEIGHT OF THE MACHINE CA.:8,0 T
DIMENSIONS OF THE MACHINE CA.: M

THE MACHINE IS EQUIPPED WITH HORIZONTAL INJECTION UNIT AND WITH A SECOND INJECTION UNIT IN ANGULAR POSITION - LCD COLOUR MONITOR, COLOUR TYPE - SELOGICA CONTROL UNIT - 1ST INJECTION UNIT (HORIZONTAL 2 COLOUR) SCREW DIAMETER: 30 MM (HIGHLY WEAR RESISTANT) SHOT WEIGHT PS: 71 G - 2ND INJECTION UNIT IN ANGULAR POSITION SCREW DIAMETER: 30 MM (HIGHLY WEAR RESISTANT) SHOT WEIGHT PS: 71 G EQUIPMENT - ADVANCED SIMULTANEOUS FAST MOVEMENTS WITH 3 PUMPS - TECHNOLOGY STEP 2 SERVOREGULATED WITH 2 REGULATING PUMPS - HIGHLY WEAR RESISTANT PLASTIFICATION UNIT - SAFETY MOULD HEATING 16 A PER HEATING CIRCUIT - ELECTR. AND HYDR. DRIVE NEEDLE VALVE NOZZLE IN THE MOULD - MIN. MOULD OPENING INCREASED TO 500 MM - MOULD BLOW UNIT 1 WITH PRESSURE REDUCER - 4 CORE PULLS - HYDRAULIC ACCUMULATOR - INCREASED INJECTION PRESSURE - INTERFACE FOR ROBOT - INTERFACE FOR TEMPERING UNIT - INTERFACE FOR PRINTER - INTERFACE FOR PC KEYBOARD - 1 ADDITIONAL HEATING CIRCUIT FOR NOZZLE - 12 ADDITIONAL HEATING CIRCUITS MOULD - SWITCH OVER TO HOLDING PRESSURE K 1 - PIEZO CHARGE AMPLIFIER - INTERFACE FOR DOSING UNIT - INTERFACE FOR DOSIING UNIT FOR INJECTION AGGREGATE 2 - INTERFACE VACUUM CONTROL - CONTROL VACUUM - 6 FREE COOLING CIRCUITS MANUAL ADJUSTABLE - ARBURG EQUIPMENT PACKAGES NO.: 1,2,3,5,6,7 - POSITON REGULATED SCREW FOR BOTH INJECTION UNITS - SPECIAL PAINTIING COLOUR \"LIGHT GREY\" - INKL. ROBOT WITTMANN TYPE W 633-0773, YEAR: 2003 - WITH SUBSTANTIAL SERIAL EQUIPMENT
Vendedor: Makutec Maschinen- und Kunststofftechnik GmbH
Año de construcción: usado
Ubicación: Land-angusspicker wittmann w702 received good to very good
year of construction: 2011

axes
x - 1000mm
x - 700mm
z - 90 â°

including sprue picker control
-programmierbar
-simple operation
-programming and control possible ANGUSSPICKER WITTMANN W702 RECEIVED GOOD TO VERY GOOD YEAR OF CONSTRUCTION: 2011 AXES X - 1000MM X - 700MM Z - 90 &ACIRC;&DEG; INCLUDING SPRUE PICKER CONTROL -PROGRAMMIERBAR -SIMPLE OPERATION -PROGRAMMING AND CONTROL POSSIBLE
Vendedor: ilosystem NB.
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-x=900 mm, y=1400 mm, z=3000 mm, c=90 X=900 MM, Y=1400 MM, Z=3000 MM, C=90
Vendedor: Plastic Product Hungary Kft.
Año de construcción: usado
Ubicación: Land-demag ergotech compact 1000-310 with robots by the mark wittmann
built in 1996

injection unit:
screw diameter: 35 mm
shot weight: 149 g
injection pressure: 2020 bar
dosing volume: 168.3 ccm

clamping unit:
clamping force: 100 t
tie bar distance: 400 x 400 mm
size of the clamping plates: 580 x 590 mm
ejector: hydraulic
clamping unit: hydraulic

control:
nc 4
additional equipment:
euromap
robot interface
core move x 1
control air valve
hot channel control

dimensions:
weight: 4200 kg
length/width/height: 4.2 x 1.4 x 1.9 m
drive:
pump/motor: 18.5 kw
heating capacity: 9.4 kw
cylinder heating: 27.9 kw

price: on request
DEMAG ERGOTECH COMPACT 1000-310 WITH ROBOTS BY THE MARK WITTMANN BUILT IN 1996 INJECTION UNIT: SCREW DIAMETER: 35 MM SHOT WEIGHT: 149 G INJECTION PRESSURE: 2020 BAR DOSING VOLUME: 168.3 CCM CLAMPING UNIT: CLAMPING FORCE: 100 T TIE BAR DISTANCE: 400 X 400 MM SIZE OF THE CLAMPING PLATES: 580 X 590 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: NC 4 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE CORE MOVE X 1 CONTROL AIR VALVE HOT CHANNEL CONTROL DIMENSIONS: WEIGHT: 4200 KG LENGTH/WIDTH/HEIGHT: 4.2 X 1.4 X 1.9 M DRIVE: PUMP/MOTOR: 18.5 KW HEATING CAPACITY: 9.4 KW CYLINDER HEATING: 27.9 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-boy 35a / hours of operation: 34.356
year of construction: 2004

injection unit:
screw diameter: 28 mm
shot weight: 55.8 g
injection pressure: 1577 bar
dosing volume: 58.5 ccm

clamping unit:
clamping force: 35 tons
tie bar distance: 280 x 254 mm
clamping plate sizes: 425 x 400 mm
ejector: hydraulic
clamping unit: hydraulic

control: procan ct - touch control / monitor

additional equipment:
euromap 12
robot interface
air valve x 2
hydraulic core pulling x 1
wittmann - brand water batteries x 4

dimensions:
weight: 1604 kg
length/width/height: 2.38 x 0.88 x 1.89 m

drive:
pump/motor: 7.5 kw
heating capacity: 2.45 kw
cylinder heating: 9.95 kw

price: on request BOY 35A / HOURS OF OPERATION: 34.356 YEAR OF CONSTRUCTION: 2004 INJECTION UNIT: SCREW DIAMETER: 28 MM SHOT WEIGHT: 55.8 G INJECTION PRESSURE: 1577 BAR DOSING VOLUME: 58.5 CCM CLAMPING UNIT: CLAMPING FORCE: 35 TONS TIE BAR DISTANCE: 280 X 254 MM CLAMPING PLATE SIZES: 425 X 400 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: PROCAN CT - TOUCH CONTROL / MONITOR ADDITIONAL EQUIPMENT: EUROMAP 12 ROBOT INTERFACE AIR VALVE X 2 HYDRAULIC CORE PULLING X 1 WITTMANN - BRAND WATER BATTERIES X 4 DIMENSIONS: WEIGHT: 1604 KG LENGTH/WIDTH/HEIGHT: 2.38 X 0.88 X 1.89 M DRIVE: PUMP/MOTOR: 7.5 KW HEATING CAPACITY: 2.45 KW CYLINDER HEATING: 9.95 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-x-travel: 550mm, y-travel: 1200mm, z-travel:2000mm, c-travel: 30nm-p90, controls: w-cnc/ cb-2814.  X-TRAVEL: 550MM, Y-TRAVEL: 1200MM, Z-TRAVEL:2000MM, C-TRAVEL: 30NM-P90, CONTROLS: W-CNC/ CB-2814.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-battenfeld macro power 1500/8800
wittmann robot bj. / year 2015

for info:

&gt; ivan, sonderanlagen belt and enclosure &gt; screw diameter? 95mm
&gt; type ak +
&gt; running hours?  5587 hours

&gt; maximum cash. 2395
&gt; cc 3271
&gt; ps 2973gr
&gt; mold height (min-max) 700-1400mm
&gt; opening stroke 2400 mm
&gt; dist. between tie bars 1600 x 1250 mm
&gt; cascade-circles 12 x. BATTENFELD MACRO POWER 1500/8800 WITTMANN ROBOT BJ. / YEAR 2015 FOR INFO: &GT; IVAN, SONDERANLAGEN BELT AND ENCLOSURE &GT; SCREW DIAMETER? 95MM &GT; TYPE AK + &GT; RUNNING HOURS? 5587 HOURS &GT; MAXIMUM CASH. 2395 &GT; CC 3271 &GT; PS 2973GR &GT; MOLD HEIGHT (MIN-MAX) 700-1400MM &GT; OPENING STROKE 2400 MM &GT; DIST. BETWEEN TIE BARS 1600 X 1250 MM &GT; CASCADE-CIRCLES 12 X.
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-demag ergotech compact 1000-310 with robots by the mark wittmann
built in 1996

injection unit:
screw diameter: 35 mm
shot weight: 149 g
injection pressure: 2020 bar
dispensing volume: 168. 3ccm

clamping unit:
clamping force: 100 t
tie bar distance: 400 x 400 mm
size of the clamping plates: 580 x 590 mm
ejector: hydraulic
clamping unit: hydraulic

control:
nc 4
additional equipment:
euromap
robot interface
core move x 1
control air valve
hot channel control

dimensions:
weight: 4200 kg
length/width/height: 4.2 x 1.4 x 1.9 m
drive:
pump/motor: 18.5 kw
heating capacity: 9.4 kw
cylinder heating: 27.9 kw

price: on request DEMAG ERGOTECH COMPACT 1000-310 WITH ROBOTS BY THE MARK WITTMANN BUILT IN 1996 INJECTION UNIT: SCREW DIAMETER: 35 MM SHOT WEIGHT: 149 G INJECTION PRESSURE: 2020 BAR DISPENSING VOLUME: 168. 3CCM CLAMPING UNIT: CLAMPING FORCE: 100 T TIE BAR DISTANCE: 400 X 400 MM SIZE OF THE CLAMPING PLATES: 580 X 590 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: NC 4 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE CORE MOVE X 1 CONTROL AIR VALVE HOT CHANNEL CONTROL DIMENSIONS: WEIGHT: 4200 KG LENGTH/WIDTH/HEIGHT: 4.2 X 1.4 X 1.9 M DRIVE: PUMP/MOTOR: 18.5 KW HEATING CAPACITY: 9.4 KW CYLINDER HEATING: 27.9 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-		
		
make:	krauss maffei
type:		km200-1000 c2
built:	2005
serialnumber:	61006468
control:	mc4
location:  poland
country of origin:	germany
		
		
technical data	

screw dia:	55 mm
shot weight: 476 g
swept volume:	523 ccm
injection pressure:	1900 bar
		
clamping force:	2000 kn
tie bar distance:	630x560 mm
platen size: 915x915 mm
mould height min.:	350 mm
opening stroke:	700 mm	
total day-light max: 1050 mm
		
power:	37 kw+19 kw
workinghours:	 45.094 h
dimensions:	5,32m x 1,90m x2,24m
weight:	9500 kg
		
equipment	

manual:	yes
robot slot: yes 

 + robot wittmann w621
   MAKE: KRAUSS MAFFEI TYPE: KM200-1000 C2 BUILT: 2005 SERIALNUMBER: 61006468 CONTROL: MC4 LOCATION: POLAND COUNTRY OF ORIGIN: GERMANY TECHNICAL DATA SCREW DIA: 55 MM SHOT WEIGHT: 476 G SWEPT VOLUME: 523 CCM INJECTION PRESSURE: 1900 BAR CLAMPING FORCE: 2000 KN TIE BAR DISTANCE: 630X560 MM PLATEN SIZE: 915X915 MM MOULD HEIGHT MIN.: 350 MM OPENING STROKE: 700 MM TOTAL DAY-LIGHT MAX: 1050 MM POWER: 37 KW+19 KW WORKINGHOURS: 45.094 H DIMENSIONS: 5,32M X 1,90M X2,24M WEIGHT: 9500 KG EQUIPMENT MANUAL: YES ROBOT SLOT: YES + ROBOT WITTMANN W621
Vendedor: TADplast
Año de construcción: usado
Ubicación: Land-max. closing force: 8000kn, distance between tie bars: 1010x1010mm, max. plate distance: 2160mm, screw diameter: 100mm, specific injection pressure: 1800bar, max. injection weight: 2790g, stroke volume: 3100cm³, length: 9600mm, width: 2200mm, weight: 33t, operational hours: ca. 75.000h, including handling robot wittmann.  MAX. CLOSING FORCE: 8000KN, DISTANCE BETWEEN TIE BARS: 1010X1010MM, MAX. PLATE DISTANCE: 2160MM, SCREW DIAMETER: 100MM, SPECIFIC INJECTION PRESSURE: 1800BAR, MAX. INJECTION WEIGHT: 2790G, STROKE VOLUME: 3100CM³, LENGTH: 9600MM, WIDTH: 2200MM, WEIGHT: 33T, OPERATIONAL HOURS: CA. 75.000H, INCLUDING HANDLING ROBOT WITTMANN.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: krauss maffei
model: 175-1900 cv
application type: injection moulding 
machine type: injection moulding machines 
availability: 01/01/2019
production year: 2002
location: germany
origin country: germany
production hours: 77389

general data
measurements width: 7500 mm 
measurements depth: 2000 mm 
measurements height: 4400 mm 
machine weight: 11800 kg

control unit
brand: krauss maffei
cnc main language: german 
cnc language customizable: yes

injection unit
screw diameter: 80 mm
shot weight: 1367 g/ps
stroke volume: 1367 cm3 
injection pressure: 1360 bar 
plasticising rate max: 135 g/s ps 
screw speed: 130 rpm
heating capacity: 49 kw 
adjustable heating zones: 9 
nozzle pressure: 110 kn

clamping unit
clamping force: 1750 kn
opening stroke: 700 mm
max open daylight: 1150 mm 
distance between bars: 560x560 mm 
mould height min: 450 mm
mould height max: 1150 mm
size of mold platens: 915x915 mm 
ejector stroke: 200 mm
ejector force for / back: 77/28 kn

media
power consumption: 198 kw

additional equipment
1: wittmann robot-system w633p -259 (300x1400)

see full technical specifications of this machine at: 
abc://bit.ly/2rx7ely
 OVERVIEW BRAND: KRAUSS MAFFEI MODEL: 175-1900 CV APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: 01/01/2019 PRODUCTION YEAR: 2002 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 77389 GENERAL DATA MEASUREMENTS WIDTH: 7500 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 4400 MM MACHINE WEIGHT: 11800 KG CONTROL UNIT BRAND: KRAUSS MAFFEI CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 80 MM SHOT WEIGHT: 1367 G/PS STROKE VOLUME: 1367 CM3 INJECTION PRESSURE: 1360 BAR PLASTICISING RATE MAX: 135 G/S PS SCREW SPEED: 130 RPM HEATING CAPACITY: 49 KW ADJUSTABLE HEATING ZONES: 9 NOZZLE PRESSURE: 110 KN CLAMPING UNIT CLAMPING FORCE: 1750 KN OPENING STROKE: 700 MM MAX OPEN DAYLIGHT: 1150 MM DISTANCE BETWEEN BARS: 560X560 MM MOULD HEIGHT MIN: 450 MM MOULD HEIGHT MAX: 1150 MM SIZE OF MOLD PLATENS: 915X915 MM EJECTOR STROKE: 200 MM EJECTOR FORCE FOR / BACK: 77/28 KN MEDIA POWER CONSUMPTION: 198 KW ADDITIONAL EQUIPMENT 1: WITTMANN ROBOT-SYSTEM W633P -259 (300X1400) SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2RX7ELY
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-battenfeld macro power 1500/8800
wittmann robot bj. / year 2015 BATTENFELD MACRO POWER 1500/8800 WITTMANN ROBOT BJ. / YEAR 2015
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-krauss maffei 650-1900-520 cz (2003)

overview
brand: krauss maffei
model: 650-1900-520 cz
application type: injection moulding
machine type: injection moulding machines
availability: immediately
production year: 2003
location: germany
origin country: germany
production hours:

general data
measurements width: 9830 mm
measurements depth: 2760 mm
measurements height: 2460 mm
machine weight: 40170 kg

control unit
brand: krauss maffei
model: mc4
cnc main language: german
cnc language customizable: yes

injection unit
screw diameter: 70 mm
shot weight: 998 g/ps
stroke volume: 1097 cm³
injection pressure: 2389 bar
plasticising rate max: 83 g/s ps
screw speed: 218 1/min
heating capacity: 36 kw
adjustable heating zones: 7

clamping unit
clamping force: 6500 kn
opening stroke: 1750 mm
distance between bars: 1000x930 mm
mould height min: 600 mm
size of mold platens: 1490x1440 mm
ejector stroke: 1150 mm
ejector force for / back: 144 kn

media
internal cooling: yes

additional equipment
1: handling wittmann w632-0203 yom 2003 KRAUSS MAFFEI 650-1900-520 CZ (2003) OVERVIEW BRAND: KRAUSS MAFFEI MODEL: 650-1900-520 CZ APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2003 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: GENERAL DATA MEASUREMENTS WIDTH: 9830 MM MEASUREMENTS DEPTH: 2760 MM MEASUREMENTS HEIGHT: 2460 MM MACHINE WEIGHT: 40170 KG CONTROL UNIT BRAND: KRAUSS MAFFEI MODEL: MC4 CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 70 MM SHOT WEIGHT: 998 G/PS STROKE VOLUME: 1097 CM³ INJECTION PRESSURE: 2389 BAR PLASTICISING RATE MAX: 83 G/S PS SCREW SPEED: 218 1/MIN HEATING CAPACITY: 36 KW ADJUSTABLE HEATING ZONES: 7 CLAMPING UNIT CLAMPING FORCE: 6500 KN OPENING STROKE: 1750 MM DISTANCE BETWEEN BARS: 1000X930 MM MOULD HEIGHT MIN: 600 MM SIZE OF MOLD PLATENS: 1490X1440 MM EJECTOR STROKE: 1150 MM EJECTOR FORCE FOR / BACK: 144 KN MEDIA INTERNAL COOLING: YES ADDITIONAL EQUIPMENT 1: HANDLING WITTMANN W632-0203 YOM 2003
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-krauss maffei 650-2300 b2 (1995)

overview
brand: krauss maffei
model: 650-2300 b2
application type: injection moulding
machine type: injection moulding machines
availability: immediately
production year: 1995
location: germany
origin country: germany
production hours:

general data
measurements width: 12420 mm
measurements depth: 3080 mm
measurements height: 2400 mm
machine weight: 45500 kg

control unit
brand: krauss maffei
model: mc3
cnc main language: german
cnc language customizable: yes

injection unit
screw diameter: 80 mm
shot weight: 1286 g/ps
injection pressure: 1626 bar
plasticising rate max: 137 g/s ps
screw speed: 277 1/min
heating capacity: 45 kw
adjustable heating zones: 7
nozzle pressure: 172.5 kn

clamping unit
clamping force: 6500 kn
opening stroke: 1150 mm
max open daylight: 1710 mm
distance between bars: 1000x900 mm
mould height min: 560 mm
size of mold platens: 1440x1350 mm
ejector stroke: 250 mm
ejector force for / back: 265 kn

media
power consumption: 110 kva

additional equipment
1: handling wittmann KRAUSS MAFFEI 650-2300 B2 (1995) OVERVIEW BRAND: KRAUSS MAFFEI MODEL: 650-2300 B2 APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1995 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: GENERAL DATA MEASUREMENTS WIDTH: 12420 MM MEASUREMENTS DEPTH: 3080 MM MEASUREMENTS HEIGHT: 2400 MM MACHINE WEIGHT: 45500 KG CONTROL UNIT BRAND: KRAUSS MAFFEI MODEL: MC3 CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 80 MM SHOT WEIGHT: 1286 G/PS INJECTION PRESSURE: 1626 BAR PLASTICISING RATE MAX: 137 G/S PS SCREW SPEED: 277 1/MIN HEATING CAPACITY: 45 KW ADJUSTABLE HEATING ZONES: 7 NOZZLE PRESSURE: 172.5 KN CLAMPING UNIT CLAMPING FORCE: 6500 KN OPENING STROKE: 1150 MM MAX OPEN DAYLIGHT: 1710 MM DISTANCE BETWEEN BARS: 1000X900 MM MOULD HEIGHT MIN: 560 MM SIZE OF MOLD PLATENS: 1440X1350 MM EJECTOR STROKE: 250 MM EJECTOR FORCE FOR / BACK: 265 KN MEDIA POWER CONSUMPTION: 110 KVA ADDITIONAL EQUIPMENT 1: HANDLING WITTMANN
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-wittmann co2 production plant
650kg per hour
year 2005
full details on application

this is part of a complete beverage factory
  WITTMANN CO2 PRODUCTION PLANT 650KG PER HOUR YEAR 2005 FULL DETAILS ON APPLICATION THIS IS PART OF A COMPLETE BEVERAGE FACTORY
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Ubicación: Land-manufacturer/manufacturer: arburg
typ/type: 420s 800-150
year/year: 2004
control/controller: selogica
clamping force/clamping force: 800 kn
holmabstand/dist.betw.tiebars: 420 x 420 mm
disk size/platen size: 570 x 570 mm
wz height/mould hight: min 250 mm
opening/opening stroke: 450 mm
plate distance of max/max open daylight: 700 mm
auger/screw size: 25 mm
stroke volume/shot volume: 53 ccm / 51 gram ps
spritzdr. / injection pressure: bar

general / general engine power: 15 kw
heating/heating power: 6,5 kw
dimensions/dimensions: 4.2 m x 1.6 m x 2.1 m
weight/weight: 3460 kg

options/optional extras
robot wittmann w721-0420 (2006)
wkz-pressure / cavity pressure x 2
hot runner control device / hot runner (18 zones)
conveyor belt / conveyor     MANUFACTURER/MANUFACTURER: ARBURG TYP/TYPE: 420S 800-150 YEAR/YEAR: 2004 CONTROL/CONTROLLER: SELOGICA CLAMPING FORCE/CLAMPING FORCE: 800 KN HOLMABSTAND/DIST.BETW.TIEBARS: 420 X 420 MM DISK SIZE/PLATEN SIZE: 570 X 570 MM WZ HEIGHT/MOULD HIGHT: MIN 250 MM OPENING/OPENING STROKE: 450 MM PLATE DISTANCE OF MAX/MAX OPEN DAYLIGHT: 700 MM AUGER/SCREW SIZE: 25 MM STROKE VOLUME/SHOT VOLUME: 53 CCM / 51 GRAM PS SPRITZDR. / INJECTION PRESSURE: BAR GENERAL / GENERAL ENGINE POWER: 15 KW HEATING/HEATING POWER: 6,5 KW DIMENSIONS/DIMENSIONS: 4.2 M X 1.6 M X 2.1 M WEIGHT/WEIGHT: 3460 KG OPTIONS/OPTIONAL EXTRAS ROBOT WITTMANN W721-0420 (2006) WKZ-PRESSURE / CAVITY PRESSURE X 2 HOT RUNNER CONTROL DEVICE / HOT RUNNER (18 ZONES) CONVEYOR BELT / CONVEYOR
Vendedor: PaGaPlast
Año de construcción: usado
Ubicación: Land-manufacturer/manufacturer: arburg
typ/type: 420 c 1300 â?? 150/60 (2-component)
year/year: 2002
control/controller: selogica
clamping force/clamping force: 1300 kn
holmabstand/dist.betw.tiebars: 420 x 420 mm
disk size/platen size: 605 x 605 mm
wz height/mould hight: min. 450 mm
opening/opening stroke: 500 mm
plate distance of max/max open daylight: 950 mm
schnecke/screw size: 1) 25 mm 2) 18 mm
stroke volume/shot volume: 25 mm / 18 mmps
spritzdr. / injection pressure: bar

general / general engine power: 22 kw
heating/heating power: 9.4 kw / 3,2 kw
dimensions/dimensions: 4.3 m x 1.6 m x 1.8 m
weight/weight: 4400 kg

options/optional extras
robot: wittmann w631-0312 (2003)
core puller / core pulling: x 2
wkz-pressure / cavity pressure hot runner control device / hot runner (9 zones)
conveyor belt / conveyor     MANUFACTURER/MANUFACTURER: ARBURG TYP/TYPE: 420 C 1300 &ACIRC;?? 150/60 (2-COMPONENT) YEAR/YEAR: 2002 CONTROL/CONTROLLER: SELOGICA CLAMPING FORCE/CLAMPING FORCE: 1300 KN HOLMABSTAND/DIST.BETW.TIEBARS: 420 X 420 MM DISK SIZE/PLATEN SIZE: 605 X 605 MM WZ HEIGHT/MOULD HIGHT: MIN. 450 MM OPENING/OPENING STROKE: 500 MM PLATE DISTANCE OF MAX/MAX OPEN DAYLIGHT: 950 MM SCHNECKE/SCREW SIZE: 1) 25 MM 2) 18 MM STROKE VOLUME/SHOT VOLUME: 25 MM / 18 MMPS SPRITZDR. / INJECTION PRESSURE: BAR GENERAL / GENERAL ENGINE POWER: 22 KW HEATING/HEATING POWER: 9.4 KW / 3,2 KW DIMENSIONS/DIMENSIONS: 4.3 M X 1.6 M X 1.8 M WEIGHT/WEIGHT: 4400 KG OPTIONS/OPTIONAL EXTRAS ROBOT: WITTMANN W631-0312 (2003) CORE PULLER / CORE PULLING: X 2 WKZ-PRESSURE / CAVITY PRESSURE HOT RUNNER CONTROL DEVICE / HOT RUNNER (9 ZONES) CONVEYOR BELT / CONVEYOR
Vendedor: PaGaPlast
Año de construcción: usado
Ubicación: Land-manufacturer/manufacturer: arburg
typ/type: 520c 2000-800
year/year: 2006
control/controller: selogica
clamping force/clamping force: 2000 kn
holmabstand/dist.betw.tiebars: 570 x 570 mm
disk size/platen size: 795 x 795 mm
wz height/mould hight: min 300 mm
opening/opening stroke: 650 mm
plate distance of max/max open daylight: 950 mm
auger/screw size: 50 mm
stroke volume/shot volume: 392 ccm / 373 gram ps
spritzdr. / injection pressure: bar

general / general engine power: 30 kw
heating/heating power: 19 kw
dimensions/dimensions: 6 m x 1.8 m x 2.1 m
weight/weight: 7900 kg

options/optional extras
robot: wittmann w721-1032 (2008)
core puller / core pulling: x 1
wkz-pressure / cavity pressure x 1
hot runner control device / hot runner (12 zones)
conveyor belt / conveyor  MANUFACTURER/MANUFACTURER: ARBURG TYP/TYPE: 520C 2000-800 YEAR/YEAR: 2006 CONTROL/CONTROLLER: SELOGICA CLAMPING FORCE/CLAMPING FORCE: 2000 KN HOLMABSTAND/DIST.BETW.TIEBARS: 570 X 570 MM DISK SIZE/PLATEN SIZE: 795 X 795 MM WZ HEIGHT/MOULD HIGHT: MIN 300 MM OPENING/OPENING STROKE: 650 MM PLATE DISTANCE OF MAX/MAX OPEN DAYLIGHT: 950 MM AUGER/SCREW SIZE: 50 MM STROKE VOLUME/SHOT VOLUME: 392 CCM / 373 GRAM PS SPRITZDR. / INJECTION PRESSURE: BAR GENERAL / GENERAL ENGINE POWER: 30 KW HEATING/HEATING POWER: 19 KW DIMENSIONS/DIMENSIONS: 6 M X 1.8 M X 2.1 M WEIGHT/WEIGHT: 7900 KG OPTIONS/OPTIONAL EXTRAS ROBOT: WITTMANN W721-1032 (2008) CORE PULLER / CORE PULLING: X 1 WKZ-PRESSURE / CAVITY PRESSURE X 1 HOT RUNNER CONTROL DEVICE / HOT RUNNER (12 ZONES) CONVEYOR BELT / CONVEYOR
Vendedor: PaGaPlast
Año de construcción: usado
Ubicación: Land-manufacturer/manufacturer: arburg
type/type: 420c 800-250
year/year: 2006
control/controller: selogica
clamping force/clamping force: 80 to
holmabstand/dist.betw.tiebars: 420 x 420 mm
disk size/platen size: 570 x 570 mm
wz height/mould hight: min 250 mm
opening/opening stroke: 550 mm
plate distance of max/max open daylight: 750 mm
auger/screw size: 30 mm
stroke volume/shot volume: 106 cc / 100 gram ps
spritzdr. / injection pressure: bar

general / general engine power: 15 kw
heating/heating power: 9 kw
dimensions/dimensions: 4.4 m x 1.6 m x 2.1 m
weight/weight: 3800 kg

options/optional extras
robot: wittmann w711-2172 (2010)
core puller / core pulling: x 1
wkz-pressure / cavity pressure x 1
hot runner control device / hot runner (6 zones)
conveyor belt / conveyor     MANUFACTURER/MANUFACTURER: ARBURG TYPE/TYPE: 420C 800-250 YEAR/YEAR: 2006 CONTROL/CONTROLLER: SELOGICA CLAMPING FORCE/CLAMPING FORCE: 80 TO HOLMABSTAND/DIST.BETW.TIEBARS: 420 X 420 MM DISK SIZE/PLATEN SIZE: 570 X 570 MM WZ HEIGHT/MOULD HIGHT: MIN 250 MM OPENING/OPENING STROKE: 550 MM PLATE DISTANCE OF MAX/MAX OPEN DAYLIGHT: 750 MM AUGER/SCREW SIZE: 30 MM STROKE VOLUME/SHOT VOLUME: 106 CC / 100 GRAM PS SPRITZDR. / INJECTION PRESSURE: BAR GENERAL / GENERAL ENGINE POWER: 15 KW HEATING/HEATING POWER: 9 KW DIMENSIONS/DIMENSIONS: 4.4 M X 1.6 M X 2.1 M WEIGHT/WEIGHT: 3800 KG OPTIONS/OPTIONAL EXTRAS ROBOT: WITTMANN W711-2172 (2010) CORE PULLER / CORE PULLING: X 1 WKZ-PRESSURE / CAVITY PRESSURE X 1 HOT RUNNER CONTROL DEVICE / HOT RUNNER (6 ZONES) CONVEYOR BELT / CONVEYOR
Vendedor: PaGaPlast
Año de construcción: usado
Ubicación: Land-injection molding machine battenfeld ba2000/630 3 k in 2008, overhauled the machine has no handling, according to technicians from wittmann battenfeld (usage last week) good and fully operational.
she would be now. INJECTION MOLDING MACHINE BATTENFELD BA2000/630 3 K IN 2008, OVERHAULED THE MACHINE HAS NO HANDLING, ACCORDING TO TECHNICIANS FROM WITTMANN BATTENFELD (USAGE LAST WEEK) GOOD AND FULLY OPERATIONAL. SHE WOULD BE NOW.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-closing force: 6500kn, tie bar distance: 900x900mm, mould opening: 930mm, mould height: 500-1200mm, shot volume: 4090cm³, shot weight: 3650g, screw diameter: 110mm, injection pressure: 1710bar, connected load: 142kw, control: nc 3, length: 11256mm, width: 2245mm, height: 2390mm, weight: 24t, operational hours: ca. 82.000h, including handling robot wittmann w633-0810, enclosure and cpnveyor belt: 4000x1000mm, available after january 2018.  CLOSING FORCE: 6500KN, TIE BAR DISTANCE: 900X900MM, MOULD OPENING: 930MM, MOULD HEIGHT: 500-1200MM, SHOT VOLUME: 4090CM³, SHOT WEIGHT: 3650G, SCREW DIAMETER: 110MM, INJECTION PRESSURE: 1710BAR, CONNECTED LOAD: 142KW, CONTROL: NC 3, LENGTH: 11256MM, WIDTH: 2245MM, HEIGHT: 2390MM, WEIGHT: 24T, OPERATIONAL HOURS: CA. 82.000H, INCLUDING HANDLING ROBOT WITTMANN W633-0810, ENCLOSURE AND CPNVEYOR BELT: 4000X1000MM, AVAILABLE AFTER JANUARY 2018.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 9.500 €
Ubicación: Land-cmb wittmann ms49 granulator
- feeding conveyor
- blower
- cyclone
- motor 45 kw
- year 2003  CMB WITTMANN MS49 GRANULATOR - FEEDING CONVEYOR - BLOWER - CYCLONE - MOTOR 45 KW - YEAR 2003
Vendedor: ACONI Oy
Año de construcción: usado
Precio: 400 €
Ubicación: Land-we offer:<br/>  <br/>  temperature control device wittmann tempro basic/c 415/240 v 3 ~ 7 kw<br/>  <br/>  info from the net:<br/>  single circuit temperature control unit (90 ° c). indirect cooling with same heat exchanger as well as same submersible pump with high capacity as at the tempro primus-c; 90. by default with leak stop operation and switch to the suction during die changes.<br/>  <br/>  the device was acquired in the context of the acquisition of an insolvent company. it is not in use and stored<br/>  <br/>  manufacturer: wittmann robot systems gmbh nuremberg<br/>  series: tempro-primus/c; 90<br/>  type: t4a3a1s00_01_00<br/>  year of construction: 100/2008<br/>  no. tp00000190<br/>  connection: 3 x 415v 11a 7kw<br/>  dimensions: h = approx. 670 mm, t = 500 mm, b = 260 mm<br/>  <br/>  condition: used unchecked<br/>  <br/>  the plant is located currently at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer for the transportation of the specified site of the purchased machine responsible.<br/>  <br/>  -3 pieces temperature control device digicolor thermonorm x-2000 3 ~ 400v escorts 7 kw<br/>  -air circulation dryer arburg thermolift 100 380v 5, 35 kw<br/>  -chiller of air cooled chillers climaserv gfc f 260 st 260 kw refrigeration capacity<br/>  -jig ingersoll gantry 500<br/>  -compressed air diaphragm pump type pump depa dl 50 with print gap control<br/>  -conditioning bath tt-100 kb-u tool-temp ag ch 3 ~ 380v 12 kw<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -150 x u steel profile (3 packets) 15x30x15x2, 5 x ca. 3000mm...<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15kw<br/>  -geyer h<br/> [...] WE OFFER:

TEMPERATURE CONTROL DEVICE WITTMANN TEMPRO BASIC/C 415/240 V 3 ~ 7 KW

INFO FROM THE NET:
SINGLE CIRCUIT TEMPERATURE CONTROL UNIT (90 ° C). INDIRECT COOLING WITH SAME HEAT EXCHANGER AS WELL AS SAME SUBMERSIBLE PUMP WITH HIGH CAPACITY AS AT THE TEMPRO PRIMUS-C; 90. BY DEFAULT WITH LEAK STOP OPERATION AND SWITCH TO THE SUCTION DURING DIE CHANGES.

THE DEVICE WAS ACQUIRED IN THE CONTEXT OF THE ACQUISITION OF AN INSOLVENT COMPANY. IT IS NOT IN USE AND STORED

MANUFACTURER: WITTMANN ROBOT SYSTEMS GMBH NUREMBERG
SERIES: TEMPRO-PRIMUS/C; 90
TYPE: T4A3A1S00_01_00
YEAR OF CONSTRUCTION: 100/2008
NO. TP00000190
CONNECTION: 3 X 415V 11A 7KW
DIMENSIONS: H = APPROX. 670 MM, T = 500 MM, B = 260 MM

CONDITION: USED UNCHECKED

THE PLANT IS LOCATED CURRENTLY AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE RESPONSIBLE.

-3 PIECES TEMPERATURE CONTROL DEVICE DIGICOLOR THERMONORM X-2000 3 ~ 400V ESCORTS 7 KW
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380V 5, 35 KW
-CHILLER OF AIR COOLED CHILLERS CLIMASERV GFC F 260 ST 260 KW REFRIGERATION CAPACITY
-JIG INGERSOLL GANTRY 500
-COMPRESSED AIR DIAPHRAGM PUMP TYPE PUMP DEPA DL 50 WITH PRINT GAP CONTROL
-CONDITIONING BATH TT-100 KB-U TOOL-TEMP AG CH 3 ~ 380V 12 KW
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-150 X U STEEL PROFILE (3 PACKETS) 15X30X15X2, 5 X CA. 3000MM...
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15KW
-GEYER H
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-we offer:<br/>  <br/>  4 temperature control device wittmann 1xtempro primus-c, 3 x digicolor x-2003<br/>  <br/>  info from the net:<br/>  single circuit temperature control unit (90 ° c). indirect cooling with same heat exchanger as well as same submersible pump with high capacity as at the tempro primus-c; 90. by default with leak stop operation and switch to the suction during die changes.<br/>  <br/>  the device was acquired in the context of the acquisition of an insolvent company. it is not in use and stored<br/>  1.<br/>  manufacturer: wittmann gmbh, nuremberg<br/>  series: tempro-primus/c; 90<br/>  type: t4a3a1s00_01_00<br/>  year of construction: 100/2008<br/>  no. tp00000190<br/>  connection: 3 x 415v 11a 7kw<br/>  dimensions: h = approx. 670 mm, t = 500 mm, b = 260 mm<br/>  <br/>  2. (example)<br/>  manufacturer: digicoplor / thermonorm bielefeld<br/>  type: x-2000<br/>  year of construction: 1998<br/>  no. 90243<br/>  connection: 3 x 230/400v 11a interf. 7kw<br/>  : pump bacon, 230/400v 50 hz, 750 w, 3.9/2.3 a ip 54<br/>  qmax.: 40l / min<br/>  hmax.; 58mfls<br/>  dimensions: approx. 650 mm h =, t = 570 mm, b = 235 mm<br/>  weight: approx. 40 kg<br/>  <br/>  condition: used unchecked<br/>  <br/>  the plant is located currently at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer for the transportation of the specified site of the purchased machine responsible.<br/>  <br/>  -injection molding machine demag ergotech 330-2300 compackt handling<br/>  -injection moulding machine arburg allrounder 221-55-250 + robot klocke<br/>  -spritzgussmaschibe angel\'s 2550 h 500w 600 duo 2 f and more<br/>  -air circulation dryer arburg thermolift 100 380v 5, 35 kw<br/>  -chiller of air cooled liquid chillers cli<br/> [...] WE OFFER:

4 TEMPERATURE CONTROL DEVICE WITTMANN 1XTEMPRO PRIMUS-C, 3 X DIGICOLOR X-2003

INFO FROM THE NET:
SINGLE CIRCUIT TEMPERATURE CONTROL UNIT (90 ° C). INDIRECT COOLING WITH SAME HEAT EXCHANGER AS WELL AS SAME SUBMERSIBLE PUMP WITH HIGH CAPACITY AS AT THE TEMPRO PRIMUS-C; 90. BY DEFAULT WITH LEAK STOP OPERATION AND SWITCH TO THE SUCTION DURING DIE CHANGES.

THE DEVICE WAS ACQUIRED IN THE CONTEXT OF THE ACQUISITION OF AN INSOLVENT COMPANY. IT IS NOT IN USE AND STORED
1.
MANUFACTURER: WITTMANN GMBH, NUREMBERG
SERIES: TEMPRO-PRIMUS/C; 90
TYPE: T4A3A1S00_01_00
YEAR OF CONSTRUCTION: 100/2008
NO. TP00000190
CONNECTION: 3 X 415V 11A 7KW
DIMENSIONS: H = APPROX. 670 MM, T = 500 MM, B = 260 MM

2. (EXAMPLE)
MANUFACTURER: DIGICOPLOR / THERMONORM BIELEFELD
TYPE: X-2000
YEAR OF CONSTRUCTION: 1998
NO. 90243
CONNECTION: 3 X 230/400V 11A INTERF. 7KW
: PUMP BACON, 230/400V 50 HZ, 750 W, 3.9/2.3 A IP 54
QMAX.: 40L / MIN
HMAX.; 58MFLS
DIMENSIONS: APPROX. 650 MM H =, T = 570 MM, B = 235 MM
WEIGHT: APPROX. 40 KG

CONDITION: USED UNCHECKED

THE PLANT IS LOCATED CURRENTLY AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE RESPONSIBLE.

-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 221-55-250 + ROBOT KLOCKE
-SPRITZGUSSMASCHIBE ANGEL\'S 2550 H 500W 600 DUO 2 F AND MORE
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380V 5, 35 KW
-CHILLER OF AIR COOLED LIQUID CHILLERS CLI
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-battenfeld
hm 110/350 + 210 l
tonnage:110
construction year 2011
screw diameter:a-40 b-35
robot connection euromap-12
core pull: 1
air ejection: 1
rotating table 600 mm, 12 hot runner
robot wittmann mod. w 811, year 2012, motan doser and feedmax wittmann, year 2011. BATTENFELD HM 110/350 + 210 L TONNAGE:110 CONSTRUCTION YEAR 2011 SCREW DIAMETER:A-40 B-35 ROBOT CONNECTION EUROMAP-12 CORE PULL: 1 AIR EJECTION: 1 ROTATING TABLE 600 MM, 12 HOT RUNNER ROBOT WITTMANN MOD. W 811, YEAR 2012, MOTAN DOSER AND FEEDMAX WITTMANN, YEAR 2011.
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: 990 €
Ubicación: Land-we offer:<br/>  <br/>  conveyor belt conveyors of mtf bflvs ca. 35x215cm h 155cm 6m / min, 2 =<br/>  stand standing adjustable with ribs, band is operational.<br/>  <br/>  manufacturer: mtf technique bergneustadt<br/>  type: bflvs<br/>  no. 90012296/02<br/>  year of construction: 1990<br/>  band dimensions: 155 x 35 cm<br/>  mass system: 200 x 55 cm (80cm with motor<br/>  height: approx. 10/155 cm<br/>  angle: due to adjustable<br/>  belt speed: ca. 6 m / min<br/>  mobile: no<br/>  connection: 380v 50 hz<br/>  engine: odg 632 2020 i/min 220/390v 0.25 kw<br/>  weight 250 kg<br/>  pages: always page protection<br/>  <br/>  state. used see photos, ready to be used, as is,<br/>  <br/>  next conveyor belts on sale.<br/>  <br/>  the conveyor is currently still at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer is responsible for the transportation of the specified site of the purchased machine.<br/>  <br/>  furthermore we offer:<br/>  <br/>  -belt conveyor belt conveyor 1250 x 370 mm of drehzahlsteueung with hot air blower hotwind 3400 w<br/>  -conveyor belt conveyors mtf nl ie 010 255x30x100cm clocked...<br/>  -conveyor belt conveyors salama 1000/400 l mobile 230v 120w<br/>  -temperature control device wittmann tempro primus c90 380v 3 ~ 7 kw<br/>  -air circulation dryer arburg thermolift 100 380 v 5.35 kw<br/>  -vigor tool trolley garant steel with wheels and drawers without content<br/>  -ring spanner set stahlwille/garant 41.36 34, 32, 30, 27 mm<br/>  -immbusschlüsselsatz pb swiss made 210 / 19, 17, 14 and 12 amf<br/>  -150 x steel 15 x 30 x 15 x 2.5 x u profile (3 packets) ca. 3000 mm...<br/>  -horde 3-car tragarmwage<br/> [...] WE OFFER:

CONVEYOR BELT CONVEYORS OF MTF BFLVS CA. 35X215CM H 155CM 6M / MIN, 2 =
STAND STANDING ADJUSTABLE WITH RIBS, BAND IS OPERATIONAL.

MANUFACTURER: MTF TECHNIQUE BERGNEUSTADT
TYPE: BFLVS
NO. 90012296/02
YEAR OF CONSTRUCTION: 1990
BAND DIMENSIONS: 155 X 35 CM
MASS SYSTEM: 200 X 55 CM (80CM WITH MOTOR
HEIGHT: APPROX. 10/155 CM
ANGLE: DUE TO ADJUSTABLE
BELT SPEED: CA. 6 M / MIN
MOBILE: NO
CONNECTION: 380V 50 HZ
ENGINE: ODG 632 2020 I/MIN 220/390V 0.25 KW
WEIGHT 250 KG
PAGES: ALWAYS PAGE PROTECTION

STATE. USED SEE PHOTOS, READY TO BE USED, AS IS,

NEXT CONVEYOR BELTS ON SALE.

THE CONVEYOR IS CURRENTLY STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

FURTHERMORE WE OFFER:

-BELT CONVEYOR BELT CONVEYOR 1250 X 370 MM OF DREHZAHLSTEUEUNG WITH HOT AIR BLOWER HOTWIND 3400 W
-CONVEYOR BELT CONVEYORS MTF NL IE 010 255X30X100CM CLOCKED...
-CONVEYOR BELT CONVEYORS SALAMA 1000/400 L MOBILE 230V 120W
-TEMPERATURE CONTROL DEVICE WITTMANN TEMPRO PRIMUS C90 380V 3 ~ 7 KW
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380 V 5.35 KW
-VIGOR TOOL TROLLEY GARANT STEEL WITH WHEELS AND DRAWERS WITHOUT CONTENT
-RING SPANNER SET STAHLWILLE/GARANT 41.36 34, 32, 30, 27 MM
-IMMBUSSCHLüSSELSATZ PB SWISS MADE 210 / 19, 17, 14 AND 12 AMF
-150 X STEEL 15 X 30 X 15 X 2.5 X U PROFILE (3 PACKETS) CA. 3000 MM...
-HORDE 3-CAR TRAGARMWAGE
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 590 €
Ubicación: Land-we offer:<br/>  <br/>  convection dryers arburg thermolift 100 380 v 5.35 kw<br/>  <br/>  the air dryer is operational. you are übernmommen in the context of a wake-up acquisition. due to a geschäfsumstelllung and or new acquisition for our clients they needed more teacher spreading.<br/>  <br/>  manufacturer: arburg<br/>  type: thermolit 100<br/>  number: 202187 and others<br/>  year of construction: 1979<br/>  total weight approx. 200 kg<br/>  connection:<br/>  voltage: 380 3 ~.<br/>  heating: 4,5 kw<br/>  blower: 0,85 kw<br/>  <br/>  state. well, ready for operation, see photos<br/>  <br/>  the dryer is still at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer is responsible for the transportation of the specified site of the purchased machine.<br/>  <br/>  5 further identical present.<br/>  <br/>  furthermore we offer:<br/>  -jig ingersoll gantry 500 + control & cooling<br/>  -temperature control device wittmann tempro primus c90 380v 3 ~ 7 kw<br/>  -conveyor belt conveyors of mtf bflvs ca. 35x215cm h = 10 / 155cm 6m / min<br/>  -injection moulding machine arburg allrounder 305-210-700 + angußp. klocke<br/>  -air circulation dryer arburg thermolift 100 380 v 5.35 kw<br/>  -8 workshop car guaranteed gedore heyco without content<br/>  -belt conveyor belt conveyor speed control with hot air blower hotwind 3400 w 1250 x 370 mm<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -electric heater wilms el 15 380v ~ 15 kw 900 m³/h<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15 kw<br/>  -geyer house connection box type: kh00 - a 3x500v 20-50 a<br/>  -sea container 20 ft<br/> [...] WE OFFER:

CONVECTION DRYERS ARBURG THERMOLIFT 100 380 V 5.35 KW

THE AIR DRYER IS OPERATIONAL. YOU ARE üBERNMOMMEN IN THE CONTEXT OF A WAKE-UP ACQUISITION. DUE TO A GESCHäFSUMSTELLLUNG AND OR NEW ACQUISITION FOR OUR CLIENTS THEY NEEDED MORE TEACHER SPREADING.

MANUFACTURER: ARBURG
TYPE: THERMOLIT 100
NUMBER: 202187 AND OTHERS
YEAR OF CONSTRUCTION: 1979
TOTAL WEIGHT APPROX. 200 KG
CONNECTION:
VOLTAGE: 380 3 ~.
HEATING: 4,5 KW
BLOWER: 0,85 KW

STATE. WELL, READY FOR OPERATION, SEE PHOTOS

THE DRYER IS STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

5 FURTHER IDENTICAL PRESENT.

FURTHERMORE WE OFFER:
-JIG INGERSOLL GANTRY 500 + CONTROL & COOLING
-TEMPERATURE CONTROL DEVICE WITTMANN TEMPRO PRIMUS C90 380V 3 ~ 7 KW
-CONVEYOR BELT CONVEYORS OF MTF BFLVS CA. 35X215CM H = 10 / 155CM 6M / MIN
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 305-210-700 + ANGUßP. KLOCKE
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380 V 5.35 KW
-8 WORKSHOP CAR GUARANTEED GEDORE HEYCO WITHOUT CONTENT
-BELT CONVEYOR BELT CONVEYOR SPEED CONTROL WITH HOT AIR BLOWER HOTWIND 3400 W 1250 X 370 MM
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-ELECTRIC HEATER WILMS EL 15 380V ~ 15 KW 900 M³/H
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15 KW
-GEYER HOUSE CONNECTION BOX TYPE: KH00 - A 3X500V 20-50 A
-SEA CONTAINER 20 FT
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 450 €
Ubicación: Land-we offer:<br/>  <br/>  temperature control device wittmann tempro basic/c 415/240 v 3 ~ 7 kw<br/>  <br/>  info from the net:<br/>  single circuit temperature control device up (90 ° c??). indirect cooling with same heat exchanger as well as same submersible pump with high capacity such as in the tempro plus 90 ° c. by default with leak stop operation and switch to the suction during die changes.<br/>  <br/>  the device was acquired in the context of the acquisition of an insolvent company. it is not in use and stored<br/>  <br/>  manufacturer: wittmann robot systems gmbh nuremberg<br/>  series: tempro-basic/c<br/>  type: tp1a3a1l00000100<br/>  year of construction: 08/98<br/>  no. tp00000001<br/>  connection: 3 x 415/240v 11a 7kw<br/>  dimensions: approx. 650 mm h =, t = 570 mm, b = 235 mm<br/>  <br/>  condition: used unchecked<br/>  <br/>  the plant is located currently at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer for the transportation of the specified site of the purchased machine responsible.<br/>  <br/>  6 piece tp primus c90 are still present.<br/>  <br/>  furthermore we offer:<br/>  -temperature control device remak tp w 150 9.0 ew/ep 400v 3 ~ 9kw<br/>  -air circulation dryer arburg thermolift 100 380v 5, 35 kw<br/>  -vigor tool trolley garant steel with wheels and drawers without content<br/>  -ring spanner set stahlwille/garant 41.36 34, 32, 30, 27 mm<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -150 x u steel profile (3 packets) 15x30x15x2, 5 x ca. 3000mm...<br/>  -industry standing wide 128 x 61 x 95 cm<br/>  -electric heater wilms el 15 380v ~ 15kw 900 m³/h<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15kw<br/>  -g<br/> [...] WE OFFER:

TEMPERATURE CONTROL DEVICE WITTMANN TEMPRO BASIC/C 415/240 V 3 ~ 7 KW

INFO FROM THE NET:
SINGLE CIRCUIT TEMPERATURE CONTROL DEVICE UP (90 ° C??). INDIRECT COOLING WITH SAME HEAT EXCHANGER AS WELL AS SAME SUBMERSIBLE PUMP WITH HIGH CAPACITY SUCH AS IN THE TEMPRO PLUS 90 ° C. BY DEFAULT WITH LEAK STOP OPERATION AND SWITCH TO THE SUCTION DURING DIE CHANGES.

THE DEVICE WAS ACQUIRED IN THE CONTEXT OF THE ACQUISITION OF AN INSOLVENT COMPANY. IT IS NOT IN USE AND STORED

MANUFACTURER: WITTMANN ROBOT SYSTEMS GMBH NUREMBERG
SERIES: TEMPRO-BASIC/C
TYPE: TP1A3A1L00000100
YEAR OF CONSTRUCTION: 08/98
NO. TP00000001
CONNECTION: 3 X 415/240V 11A 7KW
DIMENSIONS: APPROX. 650 MM H =, T = 570 MM, B = 235 MM

CONDITION: USED UNCHECKED

THE PLANT IS LOCATED CURRENTLY AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE RESPONSIBLE.

6 PIECE TP PRIMUS C90 ARE STILL PRESENT.

FURTHERMORE WE OFFER:
-TEMPERATURE CONTROL DEVICE REMAK TP W 150 9.0 EW/EP 400V 3 ~ 9KW
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380V 5, 35 KW
-VIGOR TOOL TROLLEY GARANT STEEL WITH WHEELS AND DRAWERS WITHOUT CONTENT
-RING SPANNER SET STAHLWILLE/GARANT 41.36 34, 32, 30, 27 MM
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-150 X U STEEL PROFILE (3 PACKETS) 15X30X15X2, 5 X CA. 3000MM...
-INDUSTRY STANDING WIDE 128 X 61 X 95 CM
-ELECTRIC HEATER WILMS EL 15 380V ~ 15KW 900 M³/H
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15KW
-G
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 500 €
Ubicación: Land-we offer:<br/>  <br/>  temperature control device remak tp w 150 9.0 ew/ep 4000v 3 ~ 9 kw<br/>  <br/>  the device was acquired in the context of the acquisition of an insolvent company. be. it is not in use and stored.<br/>  <br/>  manufacturer: remak clean home now tap<br/>  type: tp w 150 9.0 ew/ep 400v 3 ~ 9 kw<br/>  no. 36000427/02<br/>  year of built: 07/99<br/>  heating power: escorts 9.0 kw<br/>  connection: 3 x 400v 50 hz with si<br/>  dimensions: approx. 600 mm, h =, t = 1000 mm, b = 235 mm<br/>  weight: approx. 50 kg<br/>  <br/>  condition: used unchecked<br/>  <br/>  the plant is located currently at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer transport from the specified location of the store-bought machine responsible.<br/>  <br/>  furthermore we offer:<br/>  <br/>  -temperature control device wittmann tempro primus c90 380v 3 ~ 7 kw<br/>  -conveyor belt conveyors of mtf bflvs ca. 35x215cm h = 10 / 155cm 6m / min<br/>  -injection moulding machine arburg allrounder 305-210-700 + angußp. klocke<br/>  -air circulation dryer arburg thermolift 100 380 v 5.35 kw<br/>  -8 workshop car guaranteed gedore heyco without content<br/>  -jig ingersoll gantry 500 + control & cooling<br/>  -ring spanner set stahlwille/garant 41.36 34, 32, 30, 27 mm<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -150 x u steel profile (3 packets) 15x30x15x2, 5 x ca. 3000 mm...<br/>  -industry standing wide 128 x 61 x 95 cm<br/>  -electric heater wilms el 15 380v ~ 15 kw 900 m³/h<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15 kw<br/>  -geyer house connection box type: kh00 - a 3x500v 20-50 a<br/>  -sea container 20 ft 26.6<br/> [...] WE OFFER:

TEMPERATURE CONTROL DEVICE REMAK TP W 150 9.0 EW/EP 4000V 3 ~ 9 KW

THE DEVICE WAS ACQUIRED IN THE CONTEXT OF THE ACQUISITION OF AN INSOLVENT COMPANY. BE. IT IS NOT IN USE AND STORED.

MANUFACTURER: REMAK CLEAN HOME NOW TAP
TYPE: TP W 150 9.0 EW/EP 400V 3 ~ 9 KW
NO. 36000427/02
YEAR OF BUILT: 07/99
HEATING POWER: ESCORTS 9.0 KW
CONNECTION: 3 X 400V 50 HZ WITH SI
DIMENSIONS: APPROX. 600 MM, H =, T = 1000 MM, B = 235 MM
WEIGHT: APPROX. 50 KG

CONDITION: USED UNCHECKED

THE PLANT IS LOCATED CURRENTLY AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER TRANSPORT FROM THE SPECIFIED LOCATION OF THE STORE-BOUGHT MACHINE RESPONSIBLE.

FURTHERMORE WE OFFER:

-TEMPERATURE CONTROL DEVICE WITTMANN TEMPRO PRIMUS C90 380V 3 ~ 7 KW
-CONVEYOR BELT CONVEYORS OF MTF BFLVS CA. 35X215CM H = 10 / 155CM 6M / MIN
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 305-210-700 + ANGUßP. KLOCKE
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380 V 5.35 KW
-8 WORKSHOP CAR GUARANTEED GEDORE HEYCO WITHOUT CONTENT
-JIG INGERSOLL GANTRY 500 + CONTROL & COOLING
-RING SPANNER SET STAHLWILLE/GARANT 41.36 34, 32, 30, 27 MM
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-150 X U STEEL PROFILE (3 PACKETS) 15X30X15X2, 5 X CA. 3000 MM...
-INDUSTRY STANDING WIDE 128 X 61 X 95 CM
-ELECTRIC HEATER WILMS EL 15 380V ~ 15 KW 900 M³/H
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15 KW
-GEYER HOUSE CONNECTION BOX TYPE: KH00 - A 3X500V 20-50 A
-SEA CONTAINER 20 FT 26.6
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-technical details of 

x: 800 mm
y: 1400 mm
z: 3500 mm
c: 0-90 °

weight: 455 kg  TECHNICAL DETAILS OF X: 800 MM Y: 1400 MM Z: 3500 MM C: 0-90 ° WEIGHT: 455 KG
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-plastic injection machine sandretto 550 mega, 35.000 h.very good condition!
screw (mm): 90
between tie bars (mm): 850 - 850
mould thickness min - max (mm): 300 - 1000
opening stroke (mm): 930
max mould weight(kg): 4700
injection pressure(bar): 1548
injection volume (cm3): 2831control: sef 100

robot wittmann w633-1414 (yom 2008) stroke: x 900. y 1800, z 3000
 PLASTIC INJECTION MACHINE SANDRETTO 550 MEGA, 35.000 H.VERY GOOD CONDITION! SCREW (MM): 90 BETWEEN TIE BARS (MM): 850 - 850 MOULD THICKNESS MIN - MAX (MM): 300 - 1000 OPENING STROKE (MM): 930 MAX MOULD WEIGHT(KG): 4700 INJECTION PRESSURE(BAR): 1548 INJECTION VOLUME (CM3): 2831CONTROL: SEF 100 ROBOT WITTMANN W633-1414 (YOM 2008) STROKE: X 900. Y 1800, Z 3000
Vendedor: Geysehn SL
Año de construcción: usado
Ubicación: Land-wittmann iml servo robot type w737 (for in-mould-labeling)

z axis = 1750 mm
y axis = 1400 mm
x axis = 150 mm

including conveyor belt 500 x 2500 mm

we have 3 iml robots on stock. 2 for placing the label on the ejector side, 1 for placing label on the fixed side of the machine.
 

8 attachments click here: replying or forwarding
occupied 14,76 gb 100 gb (14%)
manage
terms of use - privacy policy
last account activity 1 hour ago
details
 WITTMANN IML SERVO ROBOT TYPE W737 (FOR IN-MOULD-LABELING) Z AXIS = 1750 MM Y AXIS = 1400 MM X AXIS = 150 MM INCLUDING CONVEYOR BELT 500 X 2500 MM WE HAVE 3 IML ROBOTS ON STOCK. 2 FOR PLACING THE LABEL ON THE EJECTOR SIDE, 1 FOR PLACING LABEL ON THE FIXED SIDE OF THE MACHINE. 8 ATTACHMENTS CLICK HERE: REPLYING OR FORWARDING OCCUPIED 14,76 GB 100 GB (14%) MANAGE TERMS OF USE - PRIVACY POLICY LAST ACCOUNT ACTIVITY 1 HOUR AGO DETAILS
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-offer / offer:

2 x battenfeld tm 180 / 750 + 2 x iml robot - wittmann robot w 727 primus 1 x battenfeld tm 240 / 750 + 1 x iml robot - wittmann robot w 7 3 7 primus bj. / year 2012 only / only 300 std / wh.




injection unit:

injection unit size 750
screw diameter 45 mm
injection pressure bar 2116
injection volume cm3 358
maximum injection weight (ps) g 325.8
screw l / d ratio 22
plasticizing capacity ps 34.3 g/s

closing unit:

technical data of the closing unit max closing force kn 2400
clearance between columns the 570 x 570 mm
minimum mold height 250 mm
max mold height mm 600
road opening form mm 530
max possible distance between fixing plates 1130 mm
size of mounting plates (855) 820 x 930 mm
 OFFER / OFFER: 2 X BATTENFELD TM 180 / 750 + 2 X IML ROBOT - WITTMANN ROBOT W 727 PRIMUS 1 X BATTENFELD TM 240 / 750 + 1 X IML ROBOT - WITTMANN ROBOT W 7 3 7 PRIMUS BJ. / YEAR 2012 ONLY / ONLY 300 STD / WH. INJECTION UNIT: INJECTION UNIT SIZE 750 SCREW DIAMETER 45 MM INJECTION PRESSURE BAR 2116 INJECTION VOLUME CM3 358 MAXIMUM INJECTION WEIGHT (PS) G 325.8 SCREW L / D RATIO 22 PLASTICIZING CAPACITY PS 34.3 G/S CLOSING UNIT: TECHNICAL DATA OF THE CLOSING UNIT MAX CLOSING FORCE KN 2400 CLEARANCE BETWEEN COLUMNS THE 570 X 570 MM MINIMUM MOLD HEIGHT 250 MM MAX MOLD HEIGHT MM 600 ROAD OPENING FORM MM 530 MAX POSSIBLE DISTANCE BETWEEN FIXING PLATES 1130 MM SIZE OF MOUNTING PLATES (855) 820 X 930 MM
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Precio: 125 €
Ubicación: Land-flow regulator <br><br/> <br>- 3 circuits<br/> <br>- including input and output with shut-off valve<br/> <br>- includes hose connection <br><br/> <br>more used and new flow regulators available; ready for operation FLOW REGULATOR


- 3 CIRCUITS

- INCLUDING INPUT AND OUTPUT WITH SHUT-OFF VALVE

- INCLUDES HOSE CONNECTION


MORE USED AND NEW FLOW REGULATORS AVAILABLE; READY FOR OPERATION
Vendedor: EagleTrade International
Año de construcción: usado
Ubicación: Land-robot wittmann w643, 
control: cnc 6.2
horizontal axis z : 10000mm
demoulding axis x : robot 1: 1200mm, robot 2: 1200mm
vertical axis y : robot 1: 2600mm, robot 2: 2600mm
2 vacuum, 3 pressures
euromap 12
   ROBOT WITTMANN W643, CONTROL: CNC 6.2 HORIZONTAL AXIS Z : 10000MM DEMOULDING AXIS X : ROBOT 1: 1200MM, ROBOT 2: 1200MM VERTICAL AXIS Y : ROBOT 1: 2600MM, ROBOT 2: 2600MM 2 VACUUM, 3 PRESSURES EUROMAP 12
Vendedor: Euromaplast
Año de construcción: usado
Ubicación: Land-kraus maffei 

technical specifications
cavities: 48
clamp force: 300 ton
clamp stroke (inj. mould): 820 mm
max. daylight: 1150 mm
plasticizing capacity: 203 gm
screw diameter: 105 mm
screw speed: 84 rpm
screw l/d ratio: 26:1
injection capacity: 2,658 cm³/shot
injection pressure: 1,280 bar
electrical specifications
hydraulic pump motor: 90 kw
extruder motor: 117 kw
machine heaters: 67 kw
additional information
other information: max. shotweight : 3012 gm
plc control : mc3
can be inspected in production.
the system includes the following items :
� wittmann w633-pet robot - year 2000
� becker sv 190/1 vacuum pump
� fasti msp 20c dehumidifier - year 2000
� motan la/4-100 pet resin dryer - year 2000
total input 29 kw
eta box 1/2 heater - year 2000
total input 57 kw
hopper volume 3,000l
   KRAUS MAFFEI TECHNICAL SPECIFICATIONS CAVITIES: 48 CLAMP FORCE: 300 TON CLAMP STROKE (INJ. MOULD): 820 MM MAX. DAYLIGHT: 1150 MM PLASTICIZING CAPACITY: 203 GM SCREW DIAMETER: 105 MM SCREW SPEED: 84 RPM SCREW L/D RATIO: 26:1 INJECTION CAPACITY: 2,658 CM³/SHOT INJECTION PRESSURE: 1,280 BAR ELECTRICAL SPECIFICATIONS HYDRAULIC PUMP MOTOR: 90 KW EXTRUDER MOTOR: 117 KW MACHINE HEATERS: 67 KW ADDITIONAL INFORMATION OTHER INFORMATION: MAX. SHOTWEIGHT : 3012 GM PLC CONTROL : MC3 CAN BE INSPECTED IN PRODUCTION. THE SYSTEM INCLUDES THE FOLLOWING ITEMS : � WITTMANN W633-PET ROBOT - YEAR 2000 � BECKER SV 190/1 VACUUM PUMP � FASTI MSP 20C DEHUMIDIFIER - YEAR 2000 � MOTAN LA/4-100 PET RESIN DRYER - YEAR 2000 TOTAL INPUT 29 KW ETA BOX 1/2 HEATER - YEAR 2000 TOTAL INPUT 57 KW HOPPER VOLUME 3,000L
Vendedor: Vöhringer engineering
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more WITTMANN types: