22 ofertas

Año de construcción: usado
Ubicación: Land-feinblech-leveler, used, fine sheet leveler, used, type / type: ubrx 3 x 1600
manufacturer / make: wmw gotha
year / year: 1974 / / / 2001 / / / 2003 overhauled electrical / control / electric and control 
                                                                                                                      refurbished maximum sheet width / max sheet width: 1600 mm
bale length: 1668 mm
maximum sheet thickness / max sheet thickness: 3 mm (yield strength 280 n/mm ^ 2 / / st 42)
                                                                     2.5 mm (yield strength 360 n/mm ^ 2 / / st 37)
                                                                     3.25 mm (yield strength 280 n/mm ^ 2 / / st 34)
min. sheet thickness / min. sheet thickness: 0.8 mm
number of the straightening rollers /.
    number of straightining rollers: 21 rolls / rollers
â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â      â â  10 top / above / / 11 down/below
roll diameter / diameter of rollers: 63 mm diameter of the support roller / diam.support roller: 123 mm
stroke of the beam / way of traverse: 3 mm up / to + 20 mm
pan travel: 2.5 mm
pressure movement: stroke:-06 mm
                                                                                     -1 mm
                                                                                      + 0.6 mm
                                                                                      + 1.2 mm
                                                                                      + 2 mm
recommended speed / speed of straightening: 15 m/min / / 22, 5 m/min / / 30 m / min
                                                                            45 m / min
traverse speed: 0.71 mm / sec
hubgeschw. the printing unit: 0.3 mm / sec
main drive motor power of main motor: 50 kw
â 
accessories: set of new unused set rollers /.
                                     set of new leveling rollers included

FEINBLECH-LEVELER, USED, FINE SHEET LEVELER, USED, TYPE / TYPE: UBRX 3 X 1600 MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR: 1974 / / / 2001 / / / 2003 OVERHAULED ELECTRICAL / CONTROL / ELECTRIC AND CONTROL REFURBISHED MAXIMUM SHEET WIDTH / MAX SHEET WIDTH: 1600 MM BALE LENGTH: 1668 MM MAXIMUM SHEET THICKNESS / MAX SHEET THICKNESS: 3 MM (YIELD STRENGTH 280 N/MM ^ 2 / / ST 42) 2.5 MM (YIELD STRENGTH 360 N/MM ^ 2 / / ST 37) 3.25 MM (YIELD STRENGTH 280 N/MM ^ 2 / / ST 34) MIN. SHEET THICKNESS / MIN. SHEET THICKNESS: 0.8 MM NUMBER OF THE STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTINING ROLLERS: 21 ROLLS / ROLLERS                                                                  10 TOP / ABOVE / / 11 DOWN/BELOW ROLL DIAMETER / DIAMETER OF ROLLERS: 63 MM DIAMETER OF THE SUPPORT ROLLER / DIAM.SUPPORT ROLLER: 123 MM STROKE OF THE BEAM / WAY OF TRAVERSE: 3 MM UP / TO + 20 MM PAN TRAVEL: 2.5 MM PRESSURE MOVEMENT: STROKE:-06 MM -1 MM + 0.6 MM + 1.2 MM + 2 MM RECOMMENDED SPEED / SPEED OF STRAIGHTENING: 15 M/MIN / / 22, 5 M/MIN / / 30 M / MIN 45 M / MIN TRAVERSE SPEED: 0.71 MM / SEC HUBGESCHW. THE PRINTING UNIT: 0.3 MM / SEC MAIN DRIVE MOTOR POWER OF MAIN MOTOR: 50 KW   ACCESSORIES: SET OF NEW UNUSED SET ROLLERS /. SET OF NEW LEVELING ROLLERS INCLUDED
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-NL Netherlands, 7461A Rijssen
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-capacity		: 	250	ton
table dimensions	: 	1.250 x 800	mm
ram dimensions	: 	900 x 670	mm
shut height max.	: 	660	mm
throat depth	: 	450	mm
clearance hole in the table	: 	400 x 360	mm
clearance hole in the spanning plate	: 	210	mm
stroke		: 	40 - 160	mm
ram adjustment	: 	110	mm
distance between the columns	: 	490	mm
strokes an minute in passage unloaded	: 	50	min-¹
motorpower	: 	22,0	kw
connection power	: 	23,5	kw
dimensions of the machine wxdxh	: 	1,5 x 2,9 x 3,6	m
weight of the machine ca.	: 	18.000	kg
operation	: 2-hand / foot		
the machine is equipped with;
-	safety overload protection system
-	automatic central lubrication
-	balance cylinders on the ram
-	additional spanning plate on the table
 CAPACITY : 250 TON TABLE DIMENSIONS : 1.250 X 800 MM RAM DIMENSIONS : 900 X 670 MM SHUT HEIGHT MAX. : 660 MM THROAT DEPTH : 450 MM CLEARANCE HOLE IN THE TABLE : 400 X 360 MM CLEARANCE HOLE IN THE SPANNING PLATE : 210 MM STROKE : 40 - 160 MM RAM ADJUSTMENT : 110 MM DISTANCE BETWEEN THE COLUMNS : 490 MM STROKES AN MINUTE IN PASSAGE UNLOADED : 50 MIN-¹ MOTORPOWER : 22,0 KW CONNECTION POWER : 23,5 KW DIMENSIONS OF THE MACHINE WXDXH : 1,5 X 2,9 X 3,6 M WEIGHT OF THE MACHINE CA. : 18.000 KG OPERATION : 2-HAND / FOOT THE MACHINE IS EQUIPPED WITH; - SAFETY OVERLOAD PROTECTION SYSTEM - AUTOMATIC CENTRAL LUBRICATION - BALANCE CYLINDERS ON THE RAM - ADDITIONAL SPANNING PLATE ON THE TABLE
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-capacity		: 	250	ton
table dimensions	: 	1.250 x 800	mm
ram dimensions	: 	900 x 670	mm
dimensions spanning plate	: 	1.600 x 810 x 100	mm
shut height max.	: 	660	mm
throat depth	: 	460	mm
clearance hole in the table	: 	400 x 360	mm
clearance hole in the spanning plate	: 	210	mm
stroke		: 	40 - 160	mm
ram adjustment	: 	110	mm
distance between the columns	: 	490	mm
strokes an minute in passage unloaded	: 	50	min-¹
motor power	: 	22,0	kw
connection power	: 	23,5	kw
dimensions of the machine wxdxh	: 	1,5 x 2,9 x 3,6	m
weight of the machine ca.	: 	17.000	kg
operation	: 2-hand / foot		
the machine is equipped with;
-	safety overload protection system
-	automatic central lubrication
-	balance cylinders on the ram
-	additional spanning plate on the table
 CAPACITY : 250 TON TABLE DIMENSIONS : 1.250 X 800 MM RAM DIMENSIONS : 900 X 670 MM DIMENSIONS SPANNING PLATE : 1.600 X 810 X 100 MM SHUT HEIGHT MAX. : 660 MM THROAT DEPTH : 460 MM CLEARANCE HOLE IN THE TABLE : 400 X 360 MM CLEARANCE HOLE IN THE SPANNING PLATE : 210 MM STROKE : 40 - 160 MM RAM ADJUSTMENT : 110 MM DISTANCE BETWEEN THE COLUMNS : 490 MM STROKES AN MINUTE IN PASSAGE UNLOADED : 50 MIN-¹ MOTOR POWER : 22,0 KW CONNECTION POWER : 23,5 KW DIMENSIONS OF THE MACHINE WXDXH : 1,5 X 2,9 X 3,6 M WEIGHT OF THE MACHINE CA. : 17.000 KG OPERATION : 2-HAND / FOOT THE MACHINE IS EQUIPPED WITH; - SAFETY OVERLOAD PROTECTION SYSTEM - AUTOMATIC CENTRAL LUBRICATION - BALANCE CYLINDERS ON THE RAM - ADDITIONAL SPANNING PLATE ON THE TABLE
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-plate width: 1600 mm<br/>plate thickness: 4,,,,,,,,,,,,20 mm<br/>number of straightening rolls: 11 rollen/rolls<br/>sheet straightening machine, used, partly overhauled<br/><br/>type: ubr 20 x 1600 /1-10<br/>make: wmw gotha<br/>year of make: 1984/2015<br/>sheet width: 1600 mm<br/>max. sheet thickness(st 50): 20 mm<br/>min. sheet thickness: 4 mm<br/>number of straightening rollers: 11 rollers<br/>diameter of straightening rollers: 180 mm<br/>speed of straightening: 10 m / min<br/>speed of adjustm. of traverse: 1 mm / sec<br/>speed of swivel of traverse: 1 mm / sec<br/>way of traverse: -10 mm bis /to +40 mm<br/>max. swivel of traverse: 10 mm<br/>power of main motor: 45 kw<br/>weight of the machine: 40 t<br/>scope overhaul<br/>machine is to overhaul in electrics=> new cabinet, control cabinet,<br/>adjustment motors ate to generally overhaul<br/>mechanically overhauling in rollers , bearings, support rollers bearings,<br/>drives , joints, clutches<br/><br/>photos on request<br/><br/><br/><br/><br/> PLATE WIDTH: 1600 MM
PLATE THICKNESS: 4,,,,,,,,,,,,20 MM
NUMBER OF STRAIGHTENING ROLLS: 11 ROLLEN/ROLLS
SHEET STRAIGHTENING MACHINE, USED, PARTLY OVERHAULED

TYPE: UBR 20 X 1600 /1-10
MAKE: WMW GOTHA
YEAR OF MAKE: 1984/2015
SHEET WIDTH: 1600 MM
MAX. SHEET THICKNESS(ST 50): 20 MM
MIN. SHEET THICKNESS: 4 MM
NUMBER OF STRAIGHTENING ROLLERS: 11 ROLLERS
DIAMETER OF STRAIGHTENING ROLLERS: 180 MM
SPEED OF STRAIGHTENING: 10 M / MIN
SPEED OF ADJUSTM. OF TRAVERSE: 1 MM / SEC
SPEED OF SWIVEL OF TRAVERSE: 1 MM / SEC
WAY OF TRAVERSE: -10 MM BIS /TO +40 MM
MAX. SWIVEL OF TRAVERSE: 10 MM
POWER OF MAIN MOTOR: 45 KW
WEIGHT OF THE MACHINE: 40 T
SCOPE OVERHAUL
MACHINE IS TO OVERHAUL IN ELECTRICS=> NEW CABINET, CONTROL CABINET,
ADJUSTMENT MOTORS ATE TO GENERALLY OVERHAUL
MECHANICALLY OVERHAULING IN ROLLERS , BEARINGS, SUPPORT ROLLERS BEARINGS,
DRIVES , JOINTS, CLUTCHES

PHOTOS ON REQUEST




Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-used tool grinder with accessories

technical data:

workpiece length max. 	600 mm
workpiece diameter max. 	250 mm
grinding length max. 	450 mm
table movement hand / feed 500 / 300 mm
table tiltable 0-90 â°
table 120 x 950 mm
grinding spindle speed 2200/ 3500 / 5200 rpm.
power 1.8 kw
dimensions approximately l x w x h 800 x 1400 x 1800 mm
weight approx. 	900 kg
performance electric 400 v 1.8 kw

USED TOOL GRINDER WITH ACCESSORIES TECHNICAL DATA: WORKPIECE LENGTH MAX. 600 MM WORKPIECE DIAMETER MAX. 250 MM GRINDING LENGTH MAX. 450 MM TABLE MOVEMENT HAND / FEED 500 / 300 MM TABLE TILTABLE 0-90 &ACIRC;&DEG; TABLE 120 X 950 MM GRINDING SPINDLE SPEED 2200/ 3500 / 5200 RPM. POWER 1.8 KW DIMENSIONS APPROXIMATELY L X W X H 800 X 1400 X 1800 MM WEIGHT APPROX. 900 KG PERFORMANCE ELECTRIC 400 V 1.8 KW
Vendedor: Oeben Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-max. grinding diameter:250 mm<br/>grinding length:450 mm<br/>workpiece length:600 mm<br/>table movement - manual:500 mm<br/>table movement:300 mm<br/>tail stock:mörse 2 <br/>spindle speeds (infinitely variable):2200/3500/5200 u/min<br/>clamping table - swivable:90 grad<br/>total power requirement:1,8 kw<br/>weight of the machine ca.:900 kg<br/>dimensions of the machine ca.:2000 x 1300 x 1700 mm<br/><br/>accessories: 1 x tailstock m. tailstock morse 2 1 x angle device 1 x notching device 1 x subhead extended mechanically 1 x spiral grinding apparatus 1 x slotting linear bearing MAX. GRINDING DIAMETER:250 MM
GRINDING LENGTH:450 MM
WORKPIECE LENGTH:600 MM
TABLE MOVEMENT - MANUAL:500 MM
TABLE MOVEMENT:300 MM
TAIL STOCK:MöRSE 2
SPINDLE SPEEDS (INFINITELY VARIABLE):2200/3500/5200 U/MIN
CLAMPING TABLE - SWIVABLE:90 GRAD
TOTAL POWER REQUIREMENT:1,8 KW
WEIGHT OF THE MACHINE CA.:900 KG
DIMENSIONS OF THE MACHINE CA.:2000 X 1300 X 1700 MM

ACCESSORIES: 1 X TAILSTOCK M. TAILSTOCK MORSE 2 1 X ANGLE DEVICE 1 X NOTCHING DEVICE 1 X SUBHEAD EXTENDED MECHANICALLY 1 X SPIRAL GRINDING APPARATUS 1 X SLOTTING LINEAR BEARING
Vendedor: Pagus Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet straightening machine, used from commons,
        sheet leveller, used, type / type: ubr xk 18 x 2000/1-10
year of construction / new in: 1974 manufacturer / make: wmw blema gotha max width / max sheet width: 2000 mm max sheet thickness / max sheet thickness (st 50): 18 mm min. baldwin hdicke / min sheet thickness (st 50): 5 mm clear stand width / distance b/n uprights: 2160 mm number of straightening rollers /.
          number of straightening rollers: 11 piece (5 top 6 below) roll diameter / diameter of straightining roller: 180 mm recommended speed / speed of straightining: 10 m / min speed of the lower traverse / sp eed of adjustm. of belowtraverse: 0.71 mm / sec pan way of the lower traverse /.
     speed of swivel of below traverse: 8 mm main drive / main motor: 40 kw power consumption / rated power: approx. 76 kw weight of machine / weight of the machine: 43 t 
SHEET STRAIGHTENING MACHINE, USED FROM COMMONS, SHEET LEVELLER, USED, TYPE / TYPE: UBR XK 18 X 2000/1-10 YEAR OF CONSTRUCTION / NEW IN: 1974 MANUFACTURER / MAKE: WMW BLEMA GOTHA MAX WIDTH / MAX SHEET WIDTH: 2000 MM MAX SHEET THICKNESS / MAX SHEET THICKNESS (ST 50): 18 MM MIN. BALDWIN HDICKE / MIN SHEET THICKNESS (ST 50): 5 MM CLEAR STAND WIDTH / DISTANCE B/N UPRIGHTS: 2160 MM NUMBER OF STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTENING ROLLERS: 11 PIECE (5 TOP 6 BELOW) ROLL DIAMETER / DIAMETER OF STRAIGHTINING ROLLER: 180 MM RECOMMENDED SPEED / SPEED OF STRAIGHTINING: 10 M / MIN SPEED OF THE LOWER TRAVERSE / SP EED OF ADJUSTM. OF BELOWTRAVERSE: 0.71 MM / SEC PAN WAY OF THE LOWER TRAVERSE /. SPEED OF SWIVEL OF BELOW TRAVERSE: 8 MM MAIN DRIVE / MAIN MOTOR: 40 KW POWER CONSUMPTION / RATED POWER: APPROX. 76 KW WEIGHT OF MACHINE / WEIGHT OF THE MACHINE: 43 T
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-grinding diameter: mm<br/>grinding length: max.  450  mm<br/>swing diameter: mm<br/>total power requirement:1,8 kw<br/>weight of the machine ca.:1100 kg<br/>dimensions of the machine ca.:1500 x 1200 x 1600  mm<br/>table movement:längs/quer: 500 / 220   mm<br/>table dimensions: 820 x 190  mm<br/>spindle turning speed range:2.200 / 3.500 / 5.200   u/min<br/><br/> GRINDING DIAMETER: MM
GRINDING LENGTH: MAX. 450 MM
SWING DIAMETER: MM
TOTAL POWER REQUIREMENT:1,8 KW
WEIGHT OF THE MACHINE CA.:1100 KG
DIMENSIONS OF THE MACHINE CA.:1500 X 1200 X 1600 MM
TABLE MOVEMENT:LäNGS/QUER: 500 / 220 MM
TABLE DIMENSIONS: 820 X 190 MM
SPINDLE TURNING SPEED RANGE:2.200 / 3.500 / 5.200 U/MIN

Vendedor: Pagus Maschinenhandel
Año de construcción: usado
Ubicación: Land- feinblech-leveler, used / fine sheet leveler, used

type / type: ubrx 3, 6 x 1600
year of construction / new in: 1985
manufacturer / make: wmw gotha
max sheet width / max sheet width: 1600 mm
bale length: 1668 mm
maximum sheet thickness / max sheet thickness: 3 mm (yield strength 360 n/mm ^ 2)
                                                                 3.6 mm (yield strength 280 n/mm ^ 2)
                                                                 4.1 mm (yield strength 200 n/mm ^ 2)
min. sheet thickness / min. sheet thickness: 0.8 mm
number of the straightening rollers /.
    number of straightining rollers: 21 rolls / rollers
                                                                   10 top / above / / 11 down/below
roll diameter / diameter of rollers: 63 mm support rollers blocks / support roller block: 6 above / above / / 6 down/below
supporting roller diameter / diam.support roller: 123 mm
back-up rollers / support rollers: up / above: 66 down / below: 72
stroke of the beam / way of traverse: 3 mm up / to + 20 mm
pan travel: 2.5 mm
kipp way: +/-2 mm
pressure movement: stroke:-06 mm
                                                                                     -1 mm
                                                                                      + 0.6 mm
                                                                                      + 1.2 mm
                                                                                      + 2 mm
recommended speed / speed of straightening: 10 m/min / / 20 m/min / / 45 m / min
traverse speed: 0.71 mm / sec
hubgeschw. the printing unit: 0.3 mm / sec
main drive motor power of main motor: 55 kw
weight of the machine / weight: 14 t

FEINBLECH-LEVELER, USED / FINE SHEET LEVELER, USED TYPE / TYPE: UBRX 3, 6 X 1600 YEAR OF CONSTRUCTION / NEW IN: 1985 MANUFACTURER / MAKE: WMW GOTHA MAX SHEET WIDTH / MAX SHEET WIDTH: 1600 MM BALE LENGTH: 1668 MM MAXIMUM SHEET THICKNESS / MAX SHEET THICKNESS: 3 MM (YIELD STRENGTH 360 N/MM ^ 2) 3.6 MM (YIELD STRENGTH 280 N/MM ^ 2) 4.1 MM (YIELD STRENGTH 200 N/MM ^ 2) MIN. SHEET THICKNESS / MIN. SHEET THICKNESS: 0.8 MM NUMBER OF THE STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTINING ROLLERS: 21 ROLLS / ROLLERS 10 TOP / ABOVE / / 11 DOWN/BELOW ROLL DIAMETER / DIAMETER OF ROLLERS: 63 MM SUPPORT ROLLERS BLOCKS / SUPPORT ROLLER BLOCK: 6 ABOVE / ABOVE / / 6 DOWN/BELOW SUPPORTING ROLLER DIAMETER / DIAM.SUPPORT ROLLER: 123 MM BACK-UP ROLLERS / SUPPORT ROLLERS: UP / ABOVE: 66 DOWN / BELOW: 72 STROKE OF THE BEAM / WAY OF TRAVERSE: 3 MM UP / TO + 20 MM PAN TRAVEL: 2.5 MM KIPP WAY: +/-2 MM PRESSURE MOVEMENT: STROKE:-06 MM -1 MM + 0.6 MM + 1.2 MM + 2 MM RECOMMENDED SPEED / SPEED OF STRAIGHTENING: 10 M/MIN / / 20 M/MIN / / 45 M / MIN TRAVERSE SPEED: 0.71 MM / SEC HUBGESCHW. THE PRINTING UNIT: 0.3 MM / SEC MAIN DRIVE MOTOR POWER OF MAIN MOTOR: 55 KW WEIGHT OF THE MACHINE / WEIGHT: 14 T
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-<br>capacity: 250 t<br>stroke: 600 mm<br>distance column/center (throat): 0 mm<br>inclination degree: 0 mm <br>
CAPACITY: 250 T
STROKE: 600 MM
DISTANCE COLUMN/CENTER (THROAT): 0 MM
INCLINATION DEGREE: 0 MM
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-sheet straightening machine, second-hand, mechanically overhauled
         sheet leveller, used, partly mechanically overhauled

type / type: ubr 16 x 2500
manufacturer / make: wmw gotha year / year of make: 1972/2015
max sheet width / max sheet width: 2500 mm nominal thickness / sheet thickness (st 42): 16 mm max sheet thickness / max: sheet thickness (st 42): 22 mm / 25 mm at 1000 mm sheet width
min. sheet thickness / min sheet thickness (st 42): 6 mm number of straightening rollers / number of straightining rollers: 11 piece (5 top 6 below) roll diameter / diameter of straightining rollers: 180 mm number  back-up rollers /.
          number of support rollers: 18 above; 21 below recommended speed / speed of straightening: 10 m / min travel of traverse way of traverse: - 10... + 40 mm stroke speed of the beam / speed of adjustm. of traverse: 1 mm / sec pan way of the lower traverse /.
           way of swivel of below traverse: 10 mm main drive / main drive: 55 kw
total connected load / rated power: 67 kw weight /.
            weight of the machine: 45 t
 
 specification:
engine overhauled in: setting roller drives, couplings, rolls, supporting roller bearing
machine overhauled in: clutches, roller drives, support rollers, roller bearings

SHEET STRAIGHTENING MACHINE, SECOND-HAND, MECHANICALLY OVERHAULED SHEET LEVELLER, USED, PARTLY MECHANICALLY OVERHAULED TYPE / TYPE: UBR 16 X 2500 MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR OF MAKE: 1972/2015 MAX SHEET WIDTH / MAX SHEET WIDTH: 2500 MM NOMINAL THICKNESS / SHEET THICKNESS (ST 42): 16 MM MAX SHEET THICKNESS / MAX: SHEET THICKNESS (ST 42): 22 MM / 25 MM AT 1000 MM SHEET WIDTH MIN. SHEET THICKNESS / MIN SHEET THICKNESS (ST 42): 6 MM NUMBER OF STRAIGHTENING ROLLERS / NUMBER OF STRAIGHTINING ROLLERS: 11 PIECE (5 TOP 6 BELOW) ROLL DIAMETER / DIAMETER OF STRAIGHTINING ROLLERS: 180 MM NUMBER BACK-UP ROLLERS /. NUMBER OF SUPPORT ROLLERS: 18 ABOVE; 21 BELOW RECOMMENDED SPEED / SPEED OF STRAIGHTENING: 10 M / MIN TRAVEL OF TRAVERSE WAY OF TRAVERSE: - 10... + 40 MM STROKE SPEED OF THE BEAM / SPEED OF ADJUSTM. OF TRAVERSE: 1 MM / SEC PAN WAY OF THE LOWER TRAVERSE /. WAY OF SWIVEL OF BELOW TRAVERSE: 10 MM MAIN DRIVE / MAIN DRIVE: 55 KW TOTAL CONNECTED LOAD / RATED POWER: 67 KW WEIGHT /. WEIGHT OF THE MACHINE: 45 T SPECIFICATION: ENGINE OVERHAULED IN: SETTING ROLLER DRIVES, COUPLINGS, ROLLS, SUPPORTING ROLLER BEARING MACHINE OVERHAULED IN: CLUTCHES, ROLLER DRIVES, SUPPORT ROLLERS, ROLLER BEARINGS
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet straightening machine, second hand, reconditioned
           sheet leveller, used, overhauled type / type: ubr 16 x 2500/1-10 k
manufacturer / make: wmw gotha
year / year of make: 1974 / 2017
max sheet width /.
        max sheet width: 2500 mm
maximum sheet thickness /.
         maximum sheet thickness (st 42): 16 mm
min. sheet thickness /.
         min sheet thickness (st 42): 6 mm
number of the straightening rollers /.
         number of straightening rollers: 11 piece (5 top 6 below)
reel diameter /.
         diameter of straightining roller: 180 mm
number of support rollers /.
         number of support rollers: 18 above; 21 down
recommended speed limit /.
         speed of straightening: 10 m / min
stroke of the beam /.
         way of traverse: - 10... + 40 mm
lifting speed of the beam /.
          speed of adjustm. of traverse: 1 mm / sec
pan way of the lower traverse /.
          way of swivel of below traverse: 10 mm
main drive / main drive: 40 kw
total connected load / rated power: 78 kw
weight of the machine / weight of the machine: 45 t

overhauling scope
machine is out of date, electric => control panel, control panel.
machine is to overhaul in electrics => new cabinet, control cabinet,
linear motors are overhauled / / eagle motor ate to generally overhaul
mechanical overhaul of roller - support bearings, drives, shafts and
couplings / /.
mechanically overhauling in rollers, bearings, support rollers bearings, drives, joints,.
clutches

SHEET STRAIGHTENING MACHINE, SECOND HAND, RECONDITIONED SHEET LEVELLER, USED, OVERHAULED TYPE / TYPE: UBR 16 X 2500/1-10 K MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR OF MAKE: 1974 / 2017 MAX SHEET WIDTH /. MAX SHEET WIDTH: 2500 MM MAXIMUM SHEET THICKNESS /. MAXIMUM SHEET THICKNESS (ST 42): 16 MM MIN. SHEET THICKNESS /. MIN SHEET THICKNESS (ST 42): 6 MM NUMBER OF THE STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTENING ROLLERS: 11 PIECE (5 TOP 6 BELOW) REEL DIAMETER /. DIAMETER OF STRAIGHTINING ROLLER: 180 MM NUMBER OF SUPPORT ROLLERS /. NUMBER OF SUPPORT ROLLERS: 18 ABOVE; 21 DOWN RECOMMENDED SPEED LIMIT /. SPEED OF STRAIGHTENING: 10 M / MIN STROKE OF THE BEAM /. WAY OF TRAVERSE: - 10... + 40 MM LIFTING SPEED OF THE BEAM /. SPEED OF ADJUSTM. OF TRAVERSE: 1 MM / SEC PAN WAY OF THE LOWER TRAVERSE /. WAY OF SWIVEL OF BELOW TRAVERSE: 10 MM MAIN DRIVE / MAIN DRIVE: 40 KW TOTAL CONNECTED LOAD / RATED POWER: 78 KW WEIGHT OF THE MACHINE / WEIGHT OF THE MACHINE: 45 T OVERHAULING SCOPE MACHINE IS OUT OF DATE, ELECTRIC => CONTROL PANEL, CONTROL PANEL. MACHINE IS TO OVERHAUL IN ELECTRICS => NEW CABINET, CONTROL CABINET, LINEAR MOTORS ARE OVERHAULED / / EAGLE MOTOR ATE TO GENERALLY OVERHAUL MECHANICAL OVERHAUL OF ROLLER - SUPPORT BEARINGS, DRIVES, SHAFTS AND COUPLINGS / /. MECHANICALLY OVERHAULING IN ROLLERS, BEARINGS, SUPPORT ROLLERS BEARINGS, DRIVES, JOINTS,. CLUTCHES
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-
sheet straightening machine, used, part overhaul
      sheet leveller, used, partly overhauled

type / type: ubr 10 x 2000 / 1-16
manufacturer / make: wmw gotha
year / year of make: 1982/2016
max sheet width / max sheet width: 2000 mm max sheet thickness / max sheet thickness (st 50): 10 mm minimum thickness / min. sheethickness: 3 mm number of straightening rollers / number of straight ing rollers: 13 rolls / rollers
reel diameter/diameter of
    straihgtening rollers: 145 mm
recommended speed / speed of straightening: 16 m / min
bale length / convexity length of rollers: 2330 mm
centre distance of the straightening rollers / distance b/n rollers center: 150 mm
supporting roller diameter / diameter of bottom rollers: 290 mm
number of rolls / number of bottom rollers 21/24
number of supports (top/bottom): 3 / 3
the traverse speed / speed of adjustm. of traverse: 0.71 mm / sec
stroke of the beam / way of traverse:-18 mm up / to + 42 mm
maximum tilting the bottom beam / maximum swivel
      of lower traverse: 8 mm main motor power of main motor: 30 kw
weight of the machine / weight: 32t
back-up rollers, supporting roller bearing
machine is overhauled electric system (control board, electric cabinet), roller drives, clutches and support rollers, roller bearings
SHEET STRAIGHTENING MACHINE, USED, PART OVERHAUL SHEET LEVELLER, USED, PARTLY OVERHAULED TYPE / TYPE: UBR 10 X 2000 / 1-16 MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR OF MAKE: 1982/2016 MAX SHEET WIDTH / MAX SHEET WIDTH: 2000 MM MAX SHEET THICKNESS / MAX SHEET THICKNESS (ST 50): 10 MM MINIMUM THICKNESS / MIN. SHEETHICKNESS: 3 MM NUMBER OF STRAIGHTENING ROLLERS / NUMBER OF STRAIGHT ING ROLLERS: 13 ROLLS / ROLLERS REEL DIAMETER/DIAMETER OF STRAIHGTENING ROLLERS: 145 MM RECOMMENDED SPEED / SPEED OF STRAIGHTENING: 16 M / MIN BALE LENGTH / CONVEXITY LENGTH OF ROLLERS: 2330 MM CENTRE DISTANCE OF THE STRAIGHTENING ROLLERS / DISTANCE B/N ROLLERS CENTER: 150 MM SUPPORTING ROLLER DIAMETER / DIAMETER OF BOTTOM ROLLERS: 290 MM NUMBER OF ROLLS / NUMBER OF BOTTOM ROLLERS 21/24 NUMBER OF SUPPORTS (TOP/BOTTOM): 3 / 3 THE TRAVERSE SPEED / SPEED OF ADJUSTM. OF TRAVERSE: 0.71 MM / SEC STROKE OF THE BEAM / WAY OF TRAVERSE:-18 MM UP / TO + 42 MM MAXIMUM TILTING THE BOTTOM BEAM / MAXIMUM SWIVEL OF LOWER TRAVERSE: 8 MM MAIN MOTOR POWER OF MAIN MOTOR: 30 KW WEIGHT OF THE MACHINE / WEIGHT: 32T BACK-UP ROLLERS, SUPPORTING ROLLER BEARING MACHINE IS OVERHAULED ELECTRIC SYSTEM (CONTROL BOARD, ELECTRIC CABINET), ROLLER DRIVES, CLUTCHES AND SUPPORT ROLLERS, ROLLER BEARINGS
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet straightening machine, used in overhaul
           sheet leveller, used in overhauling type / type: ubr 16 x 2500/1-10 k
manufacturer / make: wmw gotha
year / year of make: 1974 / 2017
max sheet width /.
        max sheet width: 2500 mm
maximum sheet thickness /.
         maximum sheet thickness (st 42): 16 mm
min. sheet thickness /.
         min sheet thickness (st 42): 6 mm
number of the straightening rollers /.
         number of straightening rollers: 11 piece (5 top 6 below)
reel diameter /.
         diameter of straightining roller: 180 mm
number of support rollers /.
         number of support rollers: 18 above; 21 down
recommended speed limit /.
         speed of straightening: 10 m / min
stroke of the beam /.
         way of traverse: - 10... + 40 mm
lifting speed of the beam /.
          speed of adjustm. of traverse: 1 mm / sec
pan way of the lower traverse /.
          way of swivel of below traverse: 10 mm
main drive / main drive: 40 kw
total connected load / rated power: 78 kw
weight of the machine / weight of the machine: 45 t
SHEET STRAIGHTENING MACHINE, USED IN OVERHAUL SHEET LEVELLER, USED IN OVERHAULING TYPE / TYPE: UBR 16 X 2500/1-10 K MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR OF MAKE: 1974 / 2017 MAX SHEET WIDTH /. MAX SHEET WIDTH: 2500 MM MAXIMUM SHEET THICKNESS /. MAXIMUM SHEET THICKNESS (ST 42): 16 MM MIN. SHEET THICKNESS /. MIN SHEET THICKNESS (ST 42): 6 MM NUMBER OF THE STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTENING ROLLERS: 11 PIECE (5 TOP 6 BELOW) REEL DIAMETER /. DIAMETER OF STRAIGHTINING ROLLER: 180 MM NUMBER OF SUPPORT ROLLERS /. NUMBER OF SUPPORT ROLLERS: 18 ABOVE; 21 DOWN RECOMMENDED SPEED LIMIT /. SPEED OF STRAIGHTENING: 10 M / MIN STROKE OF THE BEAM /. WAY OF TRAVERSE: - 10... + 40 MM LIFTING SPEED OF THE BEAM /. SPEED OF ADJUSTM. OF TRAVERSE: 1 MM / SEC PAN WAY OF THE LOWER TRAVERSE /. WAY OF SWIVEL OF BELOW TRAVERSE: 10 MM MAIN DRIVE / MAIN DRIVE: 40 KW TOTAL CONNECTED LOAD / RATED POWER: 78 KW WEIGHT OF THE MACHINE / WEIGHT OF THE MACHINE: 45 T
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-controlled line with stacking device, from site, under
power, good condition
controlled cut to length line, with stacking equipment, ex works, good
condition, under power
manufacturer / make: wmw / sket
year / year: 1985 / 2004 modernized and overhauled /.
1985/2004 modernized and overhauled
type: qta 1600 x 3
sheet thickness / thickn.: 0.8... 3 mm
thickness / width: 300 1600 mm
sheet length / length of sheets: 500 6000 mm
max coillgewicht / max coil weight: 12.5 t

main components of the system:

(1) federal trucks, movable / coil lifter, moveable
fabr.: sket
year of construction: 1985
thickness / width: 1600 mm
max coillgewicht / max coil weight: 12.5 t
(2) reel with pressure roller; second-hand / used spec with hold down roller,
fabr.: sket
year of construction: 1985
thickness / width: 1600 mm
maximum coil weight / maximum coil weight: 12.5 t
(3) insertion tool. second-hand / used feeding unit, band
fabr.: sket
year of construction: 1985
thickness / width: 1600 mm
(4) feinblech-leveler, used / fine sheet leveler, used
type / type: ubr 3, 6 x 1600
year of construction / new in: 1985
manufacturer / make: wmw gotha
max sheet width / max sheet width: 1600 mm
bale length: 1668 mm
maximum sheet thickness / max sheet thickness: 3 mm (yield strength 360 n/mm ^ 2)
3.6 mm (yield strength 280 n/mm ^ 2)
4.1 mm (yield strength 200 n/mm ^ 2)
min. sheet thickness / min. sheet thickness: 0.8 mm
number of the straightening rollers /.
number of straightining rollers: 21 rolls / rollers
10 top / above / / 11 down/below
roll diameter / diameter of rollers: 63 mm
main drive motor power of main motor: 55 kw
weight of the machine / weight: 14 t
5) sling table, second-hand / used loop unit,
fabr.: sket
year of construction: 1985
(6) cross part scissors / cut to length shearer, used
fabr.: sket
year of construction: 1985
(7) test, second-hand / used measuring unit,
(8) lifting platform / lifting platform
fabr.: sket
year of construction: 1985 CONTROLLED LINE WITH STACKING DEVICE, FROM SITE, UNDER POWER, GOOD CONDITION CONTROLLED CUT TO LENGTH LINE, WITH STACKING EQUIPMENT, EX WORKS, GOOD CONDITION, UNDER POWER MANUFACTURER / MAKE: WMW / SKET YEAR / YEAR: 1985 / 2004 MODERNIZED AND OVERHAULED /. 1985/2004 MODERNIZED AND OVERHAULED TYPE: QTA 1600 X 3 SHEET THICKNESS / THICKN.: 0.8... 3 MM THICKNESS / WIDTH: 300 1600 MM SHEET LENGTH / LENGTH OF SHEETS: 500 6000 MM MAX COILLGEWICHT / MAX COIL WEIGHT: 12.5 T MAIN COMPONENTS OF THE SYSTEM: (1) FEDERAL TRUCKS, MOVABLE / COIL LIFTER, MOVEABLE FABR.: SKET YEAR OF CONSTRUCTION: 1985 THICKNESS / WIDTH: 1600 MM MAX COILLGEWICHT / MAX COIL WEIGHT: 12.5 T (2) REEL WITH PRESSURE ROLLER; SECOND-HAND / USED SPEC WITH HOLD DOWN ROLLER, FABR.: SKET YEAR OF CONSTRUCTION: 1985 THICKNESS / WIDTH: 1600 MM MAXIMUM COIL WEIGHT / MAXIMUM COIL WEIGHT: 12.5 T (3) INSERTION TOOL. SECOND-HAND / USED FEEDING UNIT, BAND FABR.: SKET YEAR OF CONSTRUCTION: 1985 THICKNESS / WIDTH: 1600 MM (4) FEINBLECH-LEVELER, USED / FINE SHEET LEVELER, USED TYPE / TYPE: UBR 3, 6 X 1600 YEAR OF CONSTRUCTION / NEW IN: 1985 MANUFACTURER / MAKE: WMW GOTHA MAX SHEET WIDTH / MAX SHEET WIDTH: 1600 MM BALE LENGTH: 1668 MM MAXIMUM SHEET THICKNESS / MAX SHEET THICKNESS: 3 MM (YIELD STRENGTH 360 N/MM ^ 2) 3.6 MM (YIELD STRENGTH 280 N/MM ^ 2) 4.1 MM (YIELD STRENGTH 200 N/MM ^ 2) MIN. SHEET THICKNESS / MIN. SHEET THICKNESS: 0.8 MM NUMBER OF THE STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTINING ROLLERS: 21 ROLLS / ROLLERS 10 TOP / ABOVE / / 11 DOWN/BELOW ROLL DIAMETER / DIAMETER OF ROLLERS: 63 MM MAIN DRIVE MOTOR POWER OF MAIN MOTOR: 55 KW WEIGHT OF THE MACHINE / WEIGHT: 14 T 5) SLING TABLE, SECOND-HAND / USED LOOP UNIT, FABR.: SKET YEAR OF CONSTRUCTION: 1985 (6) CROSS PART SCISSORS / CUT TO LENGTH SHEARER, USED FABR.: SKET YEAR OF CONSTRUCTION: 1985 (7) TEST, SECOND-HAND / USED MEASURING UNIT, (8) LIFTING PLATFORM / LIFTING PLATFORM FABR.: SKET YEAR OF CONSTRUCTION: 1985
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet straightening machine, used sheet leveller, used

typ/ type:                                                                          ubr 20 x 1600 /1-10
manufacturer / make: wmw gotha
year / year of make: 1984
sheet width / sheet width: 1600 mm
maximum sheet thickness / max sheet thickness (st 50): 20 mm
min. sheet thickness / min. sheethickness: 4 mm number of straightening rollers / number of straightining rollers: 11 rolls / rollers
reel diameter/diameter of
    straihgtining roller: 180 mm
recommended speed / speed of straightining: 10 m / min
the traverse speed / speed of adjustm. of traverse: 1 mm / sec
rotary speed of the traverse / speed of swivel
      of traverse:                                                                    1 mm / sec
stroke of the beam / way of traverse:-10 mm up / to + 40 mm
maximum tilting the beam / maximum swivel
      of traverse: 10 mm main motor power of main motor: 45 kw
weight of the machine / weight: 40t
SHEET STRAIGHTENING MACHINE, USED SHEET LEVELLER, USED TYP/ TYPE: UBR 20 X 1600 /1-10 MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR OF MAKE: 1984 SHEET WIDTH / SHEET WIDTH: 1600 MM MAXIMUM SHEET THICKNESS / MAX SHEET THICKNESS (ST 50): 20 MM MIN. SHEET THICKNESS / MIN. SHEETHICKNESS: 4 MM NUMBER OF STRAIGHTENING ROLLERS / NUMBER OF STRAIGHTINING ROLLERS: 11 ROLLS / ROLLERS REEL DIAMETER/DIAMETER OF STRAIHGTINING ROLLER: 180 MM RECOMMENDED SPEED / SPEED OF STRAIGHTINING: 10 M / MIN THE TRAVERSE SPEED / SPEED OF ADJUSTM. OF TRAVERSE: 1 MM / SEC ROTARY SPEED OF THE TRAVERSE / SPEED OF SWIVEL OF TRAVERSE: 1 MM / SEC STROKE OF THE BEAM / WAY OF TRAVERSE:-10 MM UP / TO + 40 MM MAXIMUM TILTING THE BEAM / MAXIMUM SWIVEL OF TRAVERSE: 10 MM MAIN MOTOR POWER OF MAIN MOTOR: 45 KW WEIGHT OF THE MACHINE / WEIGHT: 40T
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet straightening machine, used, sheet leveller, used, type / type: ubr 16 x 2500 manufacturer / make: wmw gotha year / year of make: 1972/2015
max sheet width / max sheet width: 2500 mm max sheet thickness / max sheet thickness (st 42): min. thickness of 16 mm / min sheet thickness (st 42): 6 mm number of straightening rollers /.
         number of straightining rollers: 11 piece (5 top 6 below) roll diameter / diameter of straightining roller: 180 mm number rolls /.
          number of support rollers: 18 above; 21 below recommended speed / speed of straightening: 10 m / min travel of traverse way of traverse: - 10... + 40 mm stroke speed of the beam / speed of adjustm. of traverse: 1 mm / sec pan way of the lower traverse /.
           way of swivel of below traverse: 10 mm main drive / main drive: 30 kw
total connected load / rated power: 66 kw weight /.
            weight of the machine: 45 t 
SHEET STRAIGHTENING MACHINE, USED, SHEET LEVELLER, USED, TYPE / TYPE: UBR 16 X 2500 MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR OF MAKE: 1972/2015 MAX SHEET WIDTH / MAX SHEET WIDTH: 2500 MM MAX SHEET THICKNESS / MAX SHEET THICKNESS (ST 42): MIN. THICKNESS OF 16 MM / MIN SHEET THICKNESS (ST 42): 6 MM NUMBER OF STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTINING ROLLERS: 11 PIECE (5 TOP 6 BELOW) ROLL DIAMETER / DIAMETER OF STRAIGHTINING ROLLER: 180 MM NUMBER ROLLS /. NUMBER OF SUPPORT ROLLERS: 18 ABOVE; 21 BELOW RECOMMENDED SPEED / SPEED OF STRAIGHTENING: 10 M / MIN TRAVEL OF TRAVERSE WAY OF TRAVERSE: - 10... + 40 MM STROKE SPEED OF THE BEAM / SPEED OF ADJUSTM. OF TRAVERSE: 1 MM / SEC PAN WAY OF THE LOWER TRAVERSE /. WAY OF SWIVEL OF BELOW TRAVERSE: 10 MM MAIN DRIVE / MAIN DRIVE: 30 KW TOTAL CONNECTED LOAD / RATED POWER: 66 KW WEIGHT /. WEIGHT OF THE MACHINE: 45 T
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet straightening machine, used type / type: ubr 6.3 x 1600 / 1
baujahr / new in:                                                           1979
manufacturer / make: wmw max sheet width / max sheet width: 1600 mm
maximum sheet thickness / max sheet thickness (st 50): 6.3 mm
min. sheet thickness / min. sheethickness: 2 mm optimal panel thickness range / best working results at sheet thickness at width 1600 mm: 13.1, 3 mm number of straightening rollers /.
    number of straightining rollers: 15 rolls / rollers
roll diameter / diameter of rollers: 100 mm recommended speed / speed of straightining: 16 m / min
stroke of the beam / way of traverse:-12 mm up / to + 42 mm
main drive motor power of main motor: 18,5 kw
weight of the machine / weight: 28t

SHEET STRAIGHTENING MACHINE, USED TYPE / TYPE: UBR 6.3 X 1600 / 1 BAUJAHR / NEW IN: 1979 MANUFACTURER / MAKE: WMW MAX SHEET WIDTH / MAX SHEET WIDTH: 1600 MM MAXIMUM SHEET THICKNESS / MAX SHEET THICKNESS (ST 50): 6.3 MM MIN. SHEET THICKNESS / MIN. SHEETHICKNESS: 2 MM OPTIMAL PANEL THICKNESS RANGE / BEST WORKING RESULTS AT SHEET THICKNESS AT WIDTH 1600 MM: 13.1, 3 MM NUMBER OF STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTINING ROLLERS: 15 ROLLS / ROLLERS ROLL DIAMETER / DIAMETER OF ROLLERS: 100 MM RECOMMENDED SPEED / SPEED OF STRAIGHTINING: 16 M / MIN STROKE OF THE BEAM / WAY OF TRAVERSE:-12 MM UP / TO + 42 MM MAIN DRIVE MOTOR POWER OF MAIN MOTOR: 18,5 KW WEIGHT OF THE MACHINE / WEIGHT: 28T
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-stanzpresse , gebraucht
     punching,used

exzenterpresse mit festem tisch und verstellbarem hub, gebraucht
      eccentric press with fixed bed and adjustable stroke, used

typ/ type:                                                             pee ii 250  
baujahr/ year of make:                                        1983  
hersteller/ make:                                                  blema gotha wmw 
preßkraft/ rated pressure:                                     250 t
tischgröße/ table dimensions:                             1200 x 800 mm
stößelfläche surface of slide:                               900 x 670 mm
stößelhübe im leerlauf / number of strokes 
     at idle operation:                                             50 pro min
stößelverstellung / adjustment of slide:               110 mm
einbauhöhe zwischen tisch und stößel 
   bei größtem hub unten, verstellung oben /
    max. distance bed to slide:                               400 mm
hub / stroke:                                                        40..160 mm
ausladung / gap:                                                     450 mm
anschlußwert / rated power:                               23 kw
gewicht / weight:                                                16 t STANZPRESSE , GEBRAUCHT PUNCHING,USED EXZENTERPRESSE MIT FESTEM TISCH UND VERSTELLBAREM HUB, GEBRAUCHT ECCENTRIC PRESS WITH FIXED BED AND ADJUSTABLE STROKE, USED TYP/ TYPE: PEE II 250 BAUJAHR/ YEAR OF MAKE: 1983 HERSTELLER/ MAKE: BLEMA GOTHA WMW PREßKRAFT/ RATED PRESSURE: 250 T TISCHGRößE/ TABLE DIMENSIONS: 1200 X 800 MM STößELFLäCHE SURFACE OF SLIDE: 900 X 670 MM STößELHüBE IM LEERLAUF / NUMBER OF STROKES AT IDLE OPERATION: 50 PRO MIN STößELVERSTELLUNG / ADJUSTMENT OF SLIDE: 110 MM EINBAUHöHE ZWISCHEN TISCH UND STößEL BEI GRößTEM HUB UNTEN, VERSTELLUNG OBEN / MAX. DISTANCE BED TO SLIDE: 400 MM HUB / STROKE: 40..160 MM AUSLADUNG / GAP: 450 MM ANSCHLUßWERT / RATED POWER: 23 KW GEWICHT / WEIGHT: 16 T
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet straightening machine, used, part overhaul
      sheet leveller, used, partly overhauled

typ/ type:                                                                               ubr 10 x 2000 /1-16
manufacturer / make: wmw gotha
year / year of make: 1982/2011
max sheet width / max sheet width: 2000 mm max sheet thickness / max sheet thickness (st 50): 10 mm minimum thickness / min. sheethickness: 3 mm number of straightening rollers / number of straightening rollers: 13 rolls / rollers
roll diameter/diameter of
    straihgtening rollers: 145 mm
recommended speed / speed of straightening: 16 m / min
bale length / convexity length of rollers: 2330 mm
distance between centres of the straightening rollers / distance b/n rollers center: 150 mm
supporting roller diameter / diameter of bottom rollers: 290 mm
number of back-up rolls / number of bottom rollers 21/24
number of supports (top/bottom): 3 / 3
the traverse speed / speed of adjustm. of traverse: 0.71 mm / sec
stroke of the beam / way of traverse:-18 mm up / to + 42 mm
maximum tilting the bottom beam / maximum swivel
      traverse of lower: 8 mm main drive motor / power of main motor: 30 kw
weight of the machine / weight: 32t

specification:
machine is obsolete in electrical system (control panel) set roller drives, couplings, roller back-ups, supporting roller bearing
machine is overhauled electric system (control board, electric cabinet), roller drives, clutches and support rollers, roller bearings
SHEET STRAIGHTENING MACHINE, USED, PART OVERHAUL SHEET LEVELLER, USED, PARTLY OVERHAULED TYP/ TYPE: UBR 10 X 2000 /1-16 MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR OF MAKE: 1982/2011 MAX SHEET WIDTH / MAX SHEET WIDTH: 2000 MM MAX SHEET THICKNESS / MAX SHEET THICKNESS (ST 50): 10 MM MINIMUM THICKNESS / MIN. SHEETHICKNESS: 3 MM NUMBER OF STRAIGHTENING ROLLERS / NUMBER OF STRAIGHTENING ROLLERS: 13 ROLLS / ROLLERS ROLL DIAMETER/DIAMETER OF STRAIHGTENING ROLLERS: 145 MM RECOMMENDED SPEED / SPEED OF STRAIGHTENING: 16 M / MIN BALE LENGTH / CONVEXITY LENGTH OF ROLLERS: 2330 MM DISTANCE BETWEEN CENTRES OF THE STRAIGHTENING ROLLERS / DISTANCE B/N ROLLERS CENTER: 150 MM SUPPORTING ROLLER DIAMETER / DIAMETER OF BOTTOM ROLLERS: 290 MM NUMBER OF BACK-UP ROLLS / NUMBER OF BOTTOM ROLLERS 21/24 NUMBER OF SUPPORTS (TOP/BOTTOM): 3 / 3 THE TRAVERSE SPEED / SPEED OF ADJUSTM. OF TRAVERSE: 0.71 MM / SEC STROKE OF THE BEAM / WAY OF TRAVERSE:-18 MM UP / TO + 42 MM MAXIMUM TILTING THE BOTTOM BEAM / MAXIMUM SWIVEL TRAVERSE OF LOWER: 8 MM MAIN DRIVE MOTOR / POWER OF MAIN MOTOR: 30 KW WEIGHT OF THE MACHINE / WEIGHT: 32T SPECIFICATION: MACHINE IS OBSOLETE IN ELECTRICAL SYSTEM (CONTROL PANEL) SET ROLLER DRIVES, COUPLINGS, ROLLER BACK-UPS, SUPPORTING ROLLER BEARING MACHINE IS OVERHAULED ELECTRIC SYSTEM (CONTROL BOARD, ELECTRIC CABINET), ROLLER DRIVES, CLUTCHES AND SUPPORT ROLLERS, ROLLER BEARINGS
Vendedor: ZOMA Maschinenhandel
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)