24 ofertas

Año de construcción: usado
Ubicación: Land-plan lathe zerbst dp2
year of construction: 1996
endure
face plate: 㸠2500 mm
foundation slabs 2 piece
gvsmzw
twin tracks, length 2500 mm
tip height 1250 mm
great way of the bed slide: 㸠1300 mm
bed support:
-biggest way of bed carriage 1800 mm
-biggest way of the cross slide 750 mm
-biggest way of the cross slide 620 mm
-biggest way of delivery carriage 170 mm
loads:
-distance of centre of gravity of the face plate 250 mm 4000 kg
-between top 16000 kg
-at bal. 20000 kg distribution of load
main spindle:
-diameter in front bearing
280 mm
main drive:
-three-phase motor normally 55 kw
-operating voltage 400 v
-greatest torque on the faceplate
31.5 knm
-largest main cutting force 40 kn
speeds: 2.24-112 u/min
number of switchable speeds per speed series 18
stuffensprung 1.24
4 clamps PLAN LATHE ZERBST DP2 YEAR OF CONSTRUCTION: 1996 ENDURE FACE PLATE: ø 2500 MM FOUNDATION SLABS 2 PIECE GVSMZW TWIN TRACKS, LENGTH 2500 MM TIP HEIGHT 1250 MM GREAT WAY OF THE BED SLIDE: ø 1300 MM BED SUPPORT: -BIGGEST WAY OF BED CARRIAGE 1800 MM -BIGGEST WAY OF THE CROSS SLIDE 750 MM -BIGGEST WAY OF THE CROSS SLIDE 620 MM -BIGGEST WAY OF DELIVERY CARRIAGE 170 MM LOADS: -DISTANCE OF CENTRE OF GRAVITY OF THE FACE PLATE 250 MM 4000 KG -BETWEEN TOP 16000 KG -AT BAL. 20000 KG DISTRIBUTION OF LOAD MAIN SPINDLE: -DIAMETER IN FRONT BEARING 280 MM MAIN DRIVE: -THREE-PHASE MOTOR NORMALLY 55 KW -OPERATING VOLTAGE 400 V -GREATEST TORQUE ON THE FACEPLATE 31.5 KNM -LARGEST MAIN CUTTING FORCE 40 KN SPEEDS: 2.24-112 U/MIN NUMBER OF SWITCHABLE SPEEDS PER SPEED SERIES 18 STUFFENSPRUNG 1.24 4 CLAMPS
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-working range turning:  <br/>- swing diameter (max):   6000 mm<br/>- turning diameter (max):   6000 mm<br/>main spindle:  <br/>- spindle revolutions (min):    0.7 /min<br/>- spindle revolutions (max):     56 /min<br/>- number of gears:      6  <br/>electrical specifications:  <br/>- total power consumption:    100 kw<br/>- mains voltage:    400 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- total weight approx.: 100000 kg<br/><br/><br/><br/><br/> WORKING RANGE TURNING:
- SWING DIAMETER (MAX): 6000 MM
- TURNING DIAMETER (MAX): 6000 MM
MAIN SPINDLE:
- SPINDLE REVOLUTIONS (MIN): 0.7 /MIN
- SPINDLE REVOLUTIONS (MAX): 56 /MIN
- NUMBER OF GEARS: 6
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 100 KW
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- TOTAL WEIGHT APPROX.: 100000 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 300.000 €
Ubicación: Land-wmw zerbst dp 4000 ... dp 5000 heavy duty facing lathe

- faceplate diameter: 4.420 mm
- max. turning diameter over slide: 4.000 mm
- max. turning diamter: 5.000 mm
- max. turning length: 18.000 mm (or longer using more floor plates)
- 36 kw motor
- spindle speed range: 0,9 - 56 
- maximum workpiece weight between centers: 20 t
- flying maximum workpiece weight: 12.5 t

including:

- 2 pcs. of carriages with 4.500 mm turning length
- set of plate field / floor plates
- 1 pcs. roller block
- 1 pcs. tailstock

machine was overhauled 2014 in italy including completely new electrical control (i.e. infinitely variable speed), cable set and cabinets and then no longer was commissioned.

machine is disassembled and stored in schleswig-holstein/germany. we are the owner of the machine. 

functions of the machine can demonstrated under power.  WMW ZERBST DP 4000 ... DP 5000 HEAVY DUTY FACING LATHE - FACEPLATE DIAMETER: 4.420 MM - MAX. TURNING DIAMETER OVER SLIDE: 4.000 MM - MAX. TURNING DIAMTER: 5.000 MM - MAX. TURNING LENGTH: 18.000 MM (OR LONGER USING MORE FLOOR PLATES) - 36 KW MOTOR - SPINDLE SPEED RANGE: 0,9 - 56 - MAXIMUM WORKPIECE WEIGHT BETWEEN CENTERS: 20 T - FLYING MAXIMUM WORKPIECE WEIGHT: 12.5 T INCLUDING: - 2 PCS. OF CARRIAGES WITH 4.500 MM TURNING LENGTH - SET OF PLATE FIELD / FLOOR PLATES - 1 PCS. ROLLER BLOCK - 1 PCS. TAILSTOCK MACHINE WAS OVERHAULED 2014 IN ITALY INCLUDING COMPLETELY NEW ELECTRICAL CONTROL (I.E. INFINITELY VARIABLE SPEED), CABLE SET AND CABINETS AND THEN NO LONGER WAS COMMISSIONED. MACHINE IS DISASSEMBLED AND STORED IN SCHLESWIG-HOLSTEIN/GERMANY. WE ARE THE OWNER OF THE MACHINE. FUNCTIONS OF THE MACHINE CAN DEMONSTRATED UNDER POWER.
Vendedor: Karl Wrede
Año de construcción: usado
Ubicación: Land-faceplate diameter: 1600 mm<br/>turning diameter over slide rest: 2000 mm<br/>turning speed range - faceplate: 1,8-140 u/min<br/>spindle diameter in front bearing: 220 mm<br/>spindle bore: 100 mm<br/>turning length:  mm<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 20 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 1600 MM
TURNING DIAMETER OVER SLIDE REST: 2000 MM
TURNING SPEED RANGE - FACEPLATE: 1,8-140 U/MIN
SPINDLE DIAMETER IN FRONT BEARING: 220 MM
SPINDLE BORE: 100 MM
TURNING LENGTH: MM
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 20 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: AS Maschinenhandel
Año de construcción: usado
Ubicación: Land-heavy duty lathe zerbst type dps 1600 x 3000

faceplate diameter:                        1.250 mm

center height over bed:                      800 mm

max. turning diameter over bed:            1.600 mm

max. turning diameter over carriage:       1.200 mm

max. turning diameter in front of the bed:  2420 mm

max. turning length:                       3.000 mm

max. workpiece weight between centers:      8000 kg

spindle bore                                 100 mm

main motor power:                             30 kw

3 (three) bed ways construction

with 1 pc. steady rest.

location: presstrade romania warehouse, near oradea, in romania. HEAVY DUTY LATHE ZERBST TYPE DPS 1600 X 3000 FACEPLATE DIAMETER: 1.250 MM CENTER HEIGHT OVER BED: 800 MM MAX. TURNING DIAMETER OVER BED: 1.600 MM MAX. TURNING DIAMETER OVER CARRIAGE: 1.200 MM MAX. TURNING DIAMETER IN FRONT OF THE BED: 2420 MM MAX. TURNING LENGTH: 3.000 MM MAX. WORKPIECE WEIGHT BETWEEN CENTERS: 8000 KG SPINDLE BORE 100 MM MAIN MOTOR POWER: 30 KW 3 (THREE) BED WAYS CONSTRUCTION WITH 1 PC. STEADY REST. LOCATION: PRESSTRADE ROMANIA WAREHOUSE, NEAR ORADEA, IN ROMANIA.
Vendedor: PRESSTRADE Romania
Año de construcción: usado
Ubicación: Land-center height over bed: 800 mm<br/>turning diameter over bed: 1580 mm<br/>turning diameter over bed slide: 1000 mm<br/>centre distance: 1500 mm<br/>cross slide - travel: 800 mm<br/>power capacity: 55 kw<br/>turning speed range: 1-458 u/min<br/>rapid traverse  x + z axis: 6000 mm/min<br/>faceplate diameter:  mm<br/>turning diameter over slide rest:  mm<br/>turning length:  mm<br/>control: siemens sinumerik 820t <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> CENTER HEIGHT OVER BED: 800 MM
TURNING DIAMETER OVER BED: 1580 MM
TURNING DIAMETER OVER BED SLIDE: 1000 MM
CENTRE DISTANCE: 1500 MM
CROSS SLIDE - TRAVEL: 800 MM
POWER CAPACITY: 55 KW
TURNING SPEED RANGE: 1-458 U/MIN
RAPID TRAVERSE X + Z AXIS: 6000 MM/MIN
FACEPLATE DIAMETER: MM
TURNING DIAMETER OVER SLIDE REST: MM
TURNING LENGTH: MM
CONTROL: SIEMENS SINUMERIK 820T
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: AS Maschinenhandel
Año de construcción: usado
Ubicación: Land-technical data
zerbst dp1/s3 x 1500 cnc
cnc control
sinumerik 820t
factory no. w07 111 712
built in 1996
workspace
27zx78sxr
tip height over bed: 800 mm
maximum turning diameter over bed: 1580 mm
largest drehdurchm. over bed slide: 1000 mm
centre distance: 1500 mm
cross slide travel: 800 mm
external voltage: min 125/max 780 mm
internal tension: min 360/max 1000 mm
speeds and feeds
power: 55 kw
speed range: 1-458 u/min
feed x / z axes: 1-1000mm / min
rapid traverse x / z axis: 6000 mm / min
cnc control siemens
sinumerik 820t

main spindle: 1024 i/u
tool holder
4-revolver TECHNICAL DATA ZERBST DP1/S3 X 1500 CNC CNC CONTROL SINUMERIK 820T FACTORY NO. W07 111 712 BUILT IN 1996 WORKSPACE 27ZX78SXR TIP HEIGHT OVER BED: 800 MM MAXIMUM TURNING DIAMETER OVER BED: 1580 MM LARGEST DREHDURCHM. OVER BED SLIDE: 1000 MM CENTRE DISTANCE: 1500 MM CROSS SLIDE TRAVEL: 800 MM EXTERNAL VOLTAGE: MIN 125/MAX 780 MM INTERNAL TENSION: MIN 360/MAX 1000 MM SPEEDS AND FEEDS POWER: 55 KW SPEED RANGE: 1-458 U/MIN FEED X / Z AXES: 1-1000MM / MIN RAPID TRAVERSE X / Z AXIS: 6000 MM / MIN CNC CONTROL SIEMENS SINUMERIK 820T MAIN SPINDLE: 1024 I/U TOOL HOLDER 4-REVOLVER
Vendedor: CBW Böhmer Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-faceplate diameter: 4000 mm<br/>turning diameter over slide rest: - mm<br/>turning length: - mm<br/>control: siemens 840 d <br/>longitudinal movement of bed slide: 2800 mm<br/>cross slide - travel: 900 mm<br/>faceplate turning speed range -stepless-: 0,7 - 56 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>the last machined work piece had a diameter of 6300 mm !!!  (with clamping jaw <br/>extensions)<br/><br/>machine was modernized in 2012 for approx. ? 250.000,-<br/><br/><br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 4000 MM
TURNING DIAMETER OVER SLIDE REST: - MM
TURNING LENGTH: - MM
CONTROL: SIEMENS 840 D
LONGITUDINAL MOVEMENT OF BED SLIDE: 2800 MM
CROSS SLIDE - TRAVEL: 900 MM
FACEPLATE TURNING SPEED RANGE -STEPLESS-: 0,7 - 56 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
THE LAST MACHINED WORK PIECE HAD A DIAMETER OF 6300 MM !!! (WITH CLAMPING JAW
EXTENSIONS)

MACHINE WAS MODERNIZED IN 2012 FOR APPROX. ? 250.000,-






Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-number of available lathes: 4, (1) x-travel left/ right: 1300/ 650mm, z-travel left/ right: 650/ 500mm, compound slide left/ right: 500/ 170mm, face plate diameter: 3150mm, rotational speed: 1.4-90/min, feed rate: 0.09-25mm/u, torque: 50knm, control: heidenhain positip 855, year of construction: 1985 (2) x-travel left/ right: 1300/ 750mm, z-travel left/ right: 750/ 650mm, compound slide left/ right: 620/ 180mm, face plate diameter: 3550mm, rotational speed: 0.9-90/min, feed rate: 0.06-8mm/u, control: heidenhain positip 855, year of construction: 1994 (3) x-travel left: 1550mm, z-travel left: 500mm, compound slide left: 450mm, face plate diameter: 3150mm, rotational speed: 1.4-90/min, feed rate: 0.18-63mm/u, year of construction: 1989 (4) x-travel left: 1300mm, z-travel left: 550mm, compound slide left: 350mm, face plate diameter: 3150mm, rotational speed: 1.4-90/min, feed rate: 0.18-63mm/u, year of construction: 1980.  NUMBER OF AVAILABLE LATHES: 4, (1) X-TRAVEL LEFT/ RIGHT: 1300/ 650MM, Z-TRAVEL LEFT/ RIGHT: 650/ 500MM, COMPOUND SLIDE LEFT/ RIGHT: 500/ 170MM, FACE PLATE DIAMETER: 3150MM, ROTATIONAL SPEED: 1.4-90/MIN, FEED RATE: 0.09-25MM/U, TORQUE: 50KNM, CONTROL: HEIDENHAIN POSITIP 855, YEAR OF CONSTRUCTION: 1985 (2) X-TRAVEL LEFT/ RIGHT: 1300/ 750MM, Z-TRAVEL LEFT/ RIGHT: 750/ 650MM, COMPOUND SLIDE LEFT/ RIGHT: 620/ 180MM, FACE PLATE DIAMETER: 3550MM, ROTATIONAL SPEED: 0.9-90/MIN, FEED RATE: 0.06-8MM/U, CONTROL: HEIDENHAIN POSITIP 855, YEAR OF CONSTRUCTION: 1994 (3) X-TRAVEL LEFT: 1550MM, Z-TRAVEL LEFT: 500MM, COMPOUND SLIDE LEFT: 450MM, FACE PLATE DIAMETER: 3150MM, ROTATIONAL SPEED: 1.4-90/MIN, FEED RATE: 0.18-63MM/U, YEAR OF CONSTRUCTION: 1989 (4) X-TRAVEL LEFT: 1300MM, Z-TRAVEL LEFT: 550MM, COMPOUND SLIDE LEFT: 350MM, FACE PLATE DIAMETER: 3150MM, ROTATIONAL SPEED: 1.4-90/MIN, FEED RATE: 0.18-63MM/U, YEAR OF CONSTRUCTION: 1980.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-faceplate diameter: 4000 mm<br/>turning diameter over slide rest: 3100 mm<br/>turning length: 3000 mm<br/>main drive motor: 65 kw<br/>control: siemens sinumerik 840 d <br/>turning diameter in the pit: 5280 mm<br/>turning diameter over plate: 3100 mm<br/>centre distance: 3000 mm<br/>bed length: 4700 mm<br/>bed height over floor: 610 mm<br/>longitudinal movement of bed slide: 2800 mm<br/>cross slide - travel: 900 mm<br/>workpiece weight max.: 300 / 160 / 100 kn<br/>main spindle bore: 170 mm<br/>turning speed range - stepless: 0,7 - 56 u/min<br/>feed: 1,0 - 1000 mm/min<br/>rapid traverse: 6000 m/min<br/>c-axis: 0 - 0,0226 min-1<br/>tail stock:  <br/>tailstock quill diameter: 220 mm<br/>tailstock quill stroke: 210 mm<br/>centre height over plate: 1560 mm<br/>tailstock drive: 0,37 kw<br/>max. workpiece diameter: 6300 mm<br/>electrics - voltage/frequency: 380 / 50 v/hz<br/>total power requirement: 100 kw<br/>weight of the machine ca.: 100 t<br/>2012 overhauled and with new cnc control:<br/>- cnc control unit siemens 840 d<br/>- tailstock<br/>- milling unit rdr type: um 32 - 18,5kw (sk 50)<br/>- electric grinding spindle tsev 140 x 1400 7,5kw - 1500 rpm<br/>- worm gear (c-axis)<br/>- floor plates<br/><br/>workpieces up to 6300mm diameter were last manufactured on the machine!<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 4000 MM
TURNING DIAMETER OVER SLIDE REST: 3100 MM
TURNING LENGTH: 3000 MM
MAIN DRIVE MOTOR: 65 KW
CONTROL: SIEMENS SINUMERIK 840 D
TURNING DIAMETER IN THE PIT: 5280 MM
TURNING DIAMETER OVER PLATE: 3100 MM
CENTRE DISTANCE: 3000 MM
BED LENGTH: 4700 MM
BED HEIGHT OVER FLOOR: 610 MM
LONGITUDINAL MOVEMENT OF BED SLIDE: 2800 MM
CROSS SLIDE - TRAVEL: 900 MM
WORKPIECE WEIGHT MAX.: 300 / 160 / 100 KN
MAIN SPINDLE BORE: 170 MM
TURNING SPEED RANGE - STEPLESS: 0,7 - 56 U/MIN
FEED: 1,0 - 1000 MM/MIN
RAPID TRAVERSE: 6000 M/MIN
C-AXIS: 0 - 0,0226 MIN-1
TAIL STOCK:
TAILSTOCK QUILL DIAMETER: 220 MM
TAILSTOCK QUILL STROKE: 210 MM
CENTRE HEIGHT OVER PLATE: 1560 MM
TAILSTOCK DRIVE: 0,37 KW
MAX. WORKPIECE DIAMETER: 6300 MM
ELECTRICS - VOLTAGE/FREQUENCY: 380 / 50 V/HZ
TOTAL POWER REQUIREMENT: 100 KW
WEIGHT OF THE MACHINE CA.: 100 T
2012 OVERHAULED AND WITH NEW CNC CONTROL:
- CNC CONTROL UNIT SIEMENS 840 D
- TAILSTOCK
- MILLING UNIT RDR TYPE: UM 32 - 18,5KW (SK 50)
- ELECTRIC GRINDING SPINDLE TSEV 140 X 1400 7,5KW - 1500 RPM
- WORM GEAR (C-AXIS)
- FLOOR PLATES

WORKPIECES UP TO 6300MM DIAMETER WERE LAST MANUFACTURED ON THE MACHINE!




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-vertical lathe
brand: zerbst, germany model dp3
the machine consists of the front panel with main drive gear and the front part left with:
lathe carriage x-axis (1300mm)
cross slide z-axis (750 mm)
compound slide rest z-axis (620 mm)
inlet slide x-axis (170 mm)
â 
front right with:
lathe carriage x-axis (760mm)
cross slide x-axis (650 mm)
compound slide rest z-axis (180 mm)

built in: 1994
main bearing new in 2016
front panel 㸠3550 mm
speed range: 0.9-90 rounds / min
feed range: 0.06-8 mm / rev
maximum rotation time: 50 knm
power: 64kw
measuring system: heidenhain.
(incremental length measurement
system)

main spindle: kã¼bler.
(incremental speed sensor)
position display: heidenhain positip 855
operating voltage: 380v
control voltage: 24 v
power: 76kw
fuse: 3 x 200a

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 
   VERTICAL LATHE BRAND: ZERBST, GERMANY MODEL DP3 THE MACHINE CONSISTS OF THE FRONT PANEL WITH MAIN DRIVE GEAR AND THE FRONT PART LEFT WITH: LATHE CARRIAGE X-AXIS (1300MM) CROSS SLIDE Z-AXIS (750 MM) COMPOUND SLIDE REST Z-AXIS (620 MM) INLET SLIDE X-AXIS (170 MM) &ACIRC;&NBSP; FRONT RIGHT WITH: LATHE CARRIAGE X-AXIS (760MM) CROSS SLIDE X-AXIS (650 MM) COMPOUND SLIDE REST Z-AXIS (180 MM) BUILT IN: 1994 MAIN BEARING NEW IN 2016 FRONT PANEL &ATILDE;&CEDIL; 3550 MM SPEED RANGE: 0.9-90 ROUNDS / MIN FEED RANGE: 0.06-8 MM / REV MAXIMUM ROTATION TIME: 50 KNM POWER: 64KW MEASURING SYSTEM: HEIDENHAIN. (INCREMENTAL LENGTH MEASUREMENT SYSTEM) MAIN SPINDLE: K&ATILDE;&FRAC14;BLER. (INCREMENTAL SPEED SENSOR) POSITION DISPLAY: HEIDENHAIN POSITIP 855 OPERATING VOLTAGE: 380V CONTROL VOLTAGE: 24 V POWER: 76KW FUSE: 3 X 200A CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-turning diameter over bed:1600 mm<br/>turning diameter over slide rest:1200 mm<br/>turning length:2000 mm<br/>turning diameter in the gap:2300 mm<br/>max. workpiece weight between centres:8000 kg<br/>main drive:37 kw<br/>bed width:1400 mm<br/>spindle passage:100 mm<br/>spindle turning speed range:2 - 140 u/min<br/>faceplate diameter:1600 mm<br/>weight of the machine ca.:17 t<br/>total power requirement:45 kw<br/>dimensions of the machine ca.:6,5 x 3,5 x 2,8 m<br/><br/>heavy duty lathe with separate headstock - new thyrsistor controled main drive, digital readout and switch cabinet in 2008 - digital readout for 3 axis - thyristor controled main drive motor - self feed for top slide - foundation plate including spindle box base TURNING DIAMETER OVER BED:1600 MM
TURNING DIAMETER OVER SLIDE REST:1200 MM
TURNING LENGTH:2000 MM
TURNING DIAMETER IN THE GAP:2300 MM
MAX. WORKPIECE WEIGHT BETWEEN CENTRES:8000 KG
MAIN DRIVE:37 KW
BED WIDTH:1400 MM
SPINDLE PASSAGE:100 MM
SPINDLE TURNING SPEED RANGE:2 - 140 U/MIN
FACEPLATE DIAMETER:1600 MM
WEIGHT OF THE MACHINE CA.:17 T
TOTAL POWER REQUIREMENT:45 KW
DIMENSIONS OF THE MACHINE CA.:6,5 X 3,5 X 2,8 M

HEAVY DUTY LATHE WITH SEPARATE HEADSTOCK - NEW THYRSISTOR CONTROLED MAIN DRIVE, DIGITAL READOUT AND SWITCH CABINET IN 2008 - DIGITAL READOUT FOR 3 AXIS - THYRISTOR CONTROLED MAIN DRIVE MOTOR - SELF FEED FOR TOP SLIDE - FOUNDATION PLATE INCLUDING SPINDLE BOX BASE
Vendedor: Schiess-Moweg GmbH
Año de construcción: usado
Ubicación: Land-vertical lathe
brand: zerbst, germany model dp3
the machine consists of the front panel with main drive gear and the front part left with:
lathe carriage x-axis (1300mm)
cross slide z-axis (650 mm)
compound slide rest z-axis (500 mm)
inlet slide x-axis (170 mm)
â 
front right with:
lathe carriage x-axis (650mm)
cross slide x-axis (500 mm)
compound slide rest z-axis (170 mm)

year of construction: 1985
front panel 㸠3150 mm
speed range: 1.4-90 rpm
feed range: 0.09-25 mm / rev
maximum rotation time: 50 knm
power: 55kw
position display: heidenhain positip 855
operating voltage: 3x380v
control voltage: 220v
fuse: 3 x 200a

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 
   VERTICAL LATHE BRAND: ZERBST, GERMANY MODEL DP3 THE MACHINE CONSISTS OF THE FRONT PANEL WITH MAIN DRIVE GEAR AND THE FRONT PART LEFT WITH: LATHE CARRIAGE X-AXIS (1300MM) CROSS SLIDE Z-AXIS (650 MM) COMPOUND SLIDE REST Z-AXIS (500 MM) INLET SLIDE X-AXIS (170 MM) &ACIRC;&NBSP; FRONT RIGHT WITH: LATHE CARRIAGE X-AXIS (650MM) CROSS SLIDE X-AXIS (500 MM) COMPOUND SLIDE REST Z-AXIS (170 MM) YEAR OF CONSTRUCTION: 1985 FRONT PANEL &ATILDE;&CEDIL; 3150 MM SPEED RANGE: 1.4-90 RPM FEED RANGE: 0.09-25 MM / REV MAXIMUM ROTATION TIME: 50 KNM POWER: 55KW POSITION DISPLAY: HEIDENHAIN POSITIP 855 OPERATING VOLTAGE: 3X380V CONTROL VOLTAGE: 220V FUSE: 3 X 200A CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 6400 mm<br>center distance: 18000 mm<br>spindle bore: 220 mm<br>numbers of bed guide ways: 0<br>weight between centres maximum: 80000 kg <br><p>mach-id   4069</p>
<p>make       zerbst germany</p>
<p>type         dxp 5</p>
<p>year         1987</p>
<p>specifications</p>
<p>swing in the gap Ø   6400 mm</p>
<p>distance between centres    18.000 mm</p>
<p>work piece weight      80.000 kg</p>
<p>spindle bore    220 mm</p>
<p>spindle speeds / ranges    22,4 rpm</p>
<p>power    70 kw</p>
<p>dimensions</p>
<p>length    25.000 mm</p>
<p>width     15.000 mm</p>
<p>height    10.000 mm</p>
<p>
TURNING DIAMETER: 6400 MM
CENTER DISTANCE: 18000 MM
SPINDLE BORE: 220 MM
NUMBERS OF BED GUIDE WAYS: 0
WEIGHT BETWEEN CENTRES MAXIMUM: 80000 KG

MACH-ID&NBSP; &NBSP;4069

MAKE&NBSP; &NBSP; &NBSP; &NBSP;ZERBST GERMANY

TYPE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;DXP 5

YEAR&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;1987

SPECIFICATIONS

SWING IN THE GAP Ø&NBSP; &NBSP;6400 MM

DISTANCE BETWEEN CENTRES&NBSP; &NBSP; 18.000 MM

WORK PIECE WEIGHT&NBSP; &NBSP; &NBSP; 80.000 KG

SPINDLE BORE&NBSP; &NBSP; 220 MM

SPINDLE SPEEDS / RANGES&NBSP; &NBSP; 22,4 RPM

POWER&NBSP; &NBSP; 70 KW

DIMENSIONS

LENGTH&NBSP; &NBSP; 25.000 MM

WIDTH&NBSP; &NBSP; &NBSP;15.000 MM

HEIGHT&NBSP; &NBSP; 10.000 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-vertical lathe
brand: zerbst, germany model dp3 the machine consists of the front panel with main drive gear and the front part left with:
lathe carriage x-axis (1550mm)
cross slide z-axis (500 mm)
compound slide rest z-axis (450 mm)
inlet slide x-axis (170 mm)
â 
built: 1989
face plate ã¸: 3150 mm
speed range: 1.4-90 rpm
feed range: 0.18-63 mm / min
maximum rotation time: 50 knm
power: 45kw
position display: missing
operating voltage: 3x380v
control voltage: 220v

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)
 VERTICAL LATHE BRAND: ZERBST, GERMANY MODEL DP3 THE MACHINE CONSISTS OF THE FRONT PANEL WITH MAIN DRIVE GEAR AND THE FRONT PART LEFT WITH: LATHE CARRIAGE X-AXIS (1550MM) CROSS SLIDE Z-AXIS (500 MM) COMPOUND SLIDE REST Z-AXIS (450 MM) INLET SLIDE X-AXIS (170 MM) &ACIRC;&NBSP; BUILT: 1989 FACE PLATE &ATILDE;&CEDIL;: 3150 MM SPEED RANGE: 1.4-90 RPM FEED RANGE: 0.18-63 MM / MIN MAXIMUM ROTATION TIME: 50 KNM POWER: 45KW POSITION DISPLAY: MISSING OPERATING VOLTAGE: 3X380V CONTROL VOLTAGE: 220V CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-faceplate diameter: 3550 mm<br/>turning diameter over slide rest: 3500 mm<br/>turning length: 2500 mm<br/>workpiece weight max.: 25000 kg<br/>spindle turning speed range: 0,9-90 u/min<br/>feeds: 0,125 - 45 mm/u<br/>rapid traverse: 5 m/min<br/>total power requirement: 75 kw<br/>weight of the machine ca.: 62 t<br/>dimensions of the machine ca.: 10 x 3 x 2 m<br/>machine consists out of the components spindle head, machine bed with saddles <br/>and floor plates where all those components have to be placed on. <br/>the workpiece length is dependent on how the components are placed and could be <br/>10 m or even more.<br/>machine has face plate extensions to increase the swing diameter to 4800 mm (8 <br/>pieces). machine will come with 8 jaws.<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 3550 MM
TURNING DIAMETER OVER SLIDE REST: 3500 MM
TURNING LENGTH: 2500 MM
WORKPIECE WEIGHT MAX.: 25000 KG
SPINDLE TURNING SPEED RANGE: 0,9-90 U/MIN
FEEDS: 0,125 - 45 MM/U
RAPID TRAVERSE: 5 M/MIN
TOTAL POWER REQUIREMENT: 75 KW
WEIGHT OF THE MACHINE CA.: 62 T
DIMENSIONS OF THE MACHINE CA.: 10 X 3 X 2 M
MACHINE CONSISTS OUT OF THE COMPONENTS SPINDLE HEAD, MACHINE BED WITH SADDLES
AND FLOOR PLATES WHERE ALL THOSE COMPONENTS HAVE TO BE PLACED ON.
THE WORKPIECE LENGTH IS DEPENDENT ON HOW THE COMPONENTS ARE PLACED AND COULD BE
10 M OR EVEN MORE.
MACHINE HAS FACE PLATE EXTENSIONS TO INCREASE THE SWING DIAMETER TO 4800 MM (8
PIECES). MACHINE WILL COME WITH 8 JAWS.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-vertical lathe
brand: zerbst, germany model dp3, the machine consists of the front panel with main drive gear and the front part left with:
lathe carriage x-axis (1300mm)
cross slide z-axis (550 mm)
compound slide rest z-axis (350 mm)
inlet slide x-axis (150 mm)
â 
year of construction: 1980
face plate ã¸: 3150 mm
speed range: 1.4-90 rpm
feed range: 0.18-63 mm / min
maximum rotation time: 50 knm
power: 45kw
position display: axesta
operating voltage: 380v
control voltage: 220v

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) VERTICAL LATHE BRAND: ZERBST, GERMANY MODEL DP3, THE MACHINE CONSISTS OF THE FRONT PANEL WITH MAIN DRIVE GEAR AND THE FRONT PART LEFT WITH: LATHE CARRIAGE X-AXIS (1300MM) CROSS SLIDE Z-AXIS (550 MM) COMPOUND SLIDE REST Z-AXIS (350 MM) INLET SLIDE X-AXIS (150 MM) &ACIRC;&NBSP; YEAR OF CONSTRUCTION: 1980 FACE PLATE &ATILDE;&CEDIL;: 3150 MM SPEED RANGE: 1.4-90 RPM FEED RANGE: 0.18-63 MM / MIN MAXIMUM ROTATION TIME: 50 KNM POWER: 45KW POSITION DISPLAY: AXESTA OPERATING VOLTAGE: 380V CONTROL VOLTAGE: 220V CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-turning diameter: 1250 mm<br/>turning dia. in gap: 1800 mm<br/>speed: 5,6 - 250 (12x) u/min<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TURNING DIAMETER: 1250 MM
TURNING DIA. IN GAP: 1800 MM
SPEED: 5,6 - 250 (12X) U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-face lathe wmw zerbst k275 
turning lenght: 3000 mm 
turning diam: 2750 mm 
turning diam (chuck): 3250 mm

 FACE LATHE WMW ZERBST K275 TURNING LENGHT: 3000 MM TURNING DIAM: 2750 MM TURNING DIAM (CHUCK): 3250 MM
Vendedor: usedmachines
Año de construcción: usado
Ubicación: Land-faceplate diameter: 1600 mm<br/>turning diameter over slide: 2000 mm<br/>turning length: 0 mm<br/>max. workpiece weight -without tailstock: 3150 kg<br/>turning speed range - faceplate: 1,8-140 u/min<br/>feed range: 0,71-63 mm/min<br/>steel cross cut max.: 32x50 mm²<br/>bed length:  mm<br/>spindle bore: 100 mm<br/>spindle diameter in front bearing: 220 mm<br/>max. workpiece weight between centers: ca. 15 to<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 20 t<br/>with 2 floor plates<br/>without tail stock<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 1600 MM
TURNING DIAMETER OVER SLIDE: 2000 MM
TURNING LENGTH: 0 MM
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK: 3150 KG
TURNING SPEED RANGE - FACEPLATE: 1,8-140 U/MIN
FEED RANGE: 0,71-63 MM/MIN
STEEL CROSS CUT MAX.: 32X50 MM²
BED LENGTH: MM
SPINDLE BORE: 100 MM
SPINDLE DIAMETER IN FRONT BEARING: 220 MM
MAX. WORKPIECE WEIGHT BETWEEN CENTERS: CA. 15 TO
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 20 T
WITH 2 FLOOR PLATES
WITHOUT TAIL STOCK




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 1580 mm<br/>turning diameter over slide rest: 1000 mm<br/>turning length: 1500 mm<br/>faceplate diameter: 1250 mm<br/>faceplate turning speed range: 1- 458 u/min<br/>centre height: 800 mm<br/>workpiece weight: 10000 kg<br/>max. torque on the spindle: 20000 nm<br/>control: siemens sinumerik 820 t <br/>total power requirement: 55 kw<br/>weight of the machine ca.: 0 t<br/>dimensions of the machine ca.: 0 m<br/>equipped with:<br/>- cnc control siemens 820t<br/>- 4-fold tool holder<br/>- counter stay<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 1580 MM
TURNING DIAMETER OVER SLIDE REST: 1000 MM
TURNING LENGTH: 1500 MM
FACEPLATE DIAMETER: 1250 MM
FACEPLATE TURNING SPEED RANGE: 1- 458 U/MIN
CENTRE HEIGHT: 800 MM
WORKPIECE WEIGHT: 10000 KG
MAX. TORQUE ON THE SPINDLE: 20000 NM
CONTROL: SIEMENS SINUMERIK 820 T
TOTAL POWER REQUIREMENT: 55 KW
WEIGHT OF THE MACHINE CA.: 0 T
DIMENSIONS OF THE MACHINE CA.: 0 M
EQUIPPED WITH:
- CNC CONTROL SIEMENS 820T
- 4-FOLD TOOL HOLDER
- COUNTER STAY




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-faceplate diameter: 3150 mm<br/>turning diameter: 4000 mm<br/>turning length: 6000 (8000) mm<br/>centre height over plate: 1120 mm<br/>workpiece weight: 25.000 kg<br/>spindle turning speed range: 0,9 - 90 u/min<br/>control: siemens 802 d <br/>feed: 0 - 4000 mm/min<br/>drive motor: 75 kw<br/>longitudinal feed: 6000 mm<br/>cross travel: 1500 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 62 t<br/>dimensions of the machine ca.: 16,5 x 5,2 x 3,1 m<br/>completely overhauled facing lathe<br/>equipped with:<br/>- cnc control siemens 802d<br/>- heidenhain scales in x and z axis<br/>- new ballscrews, newly regrinded guideways, new hydraulics, electrics, <br/>lubrication<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 3150 MM
TURNING DIAMETER: 4000 MM
TURNING LENGTH: 6000 (8000) MM
CENTRE HEIGHT OVER PLATE: 1120 MM
WORKPIECE WEIGHT: 25.000 KG
SPINDLE TURNING SPEED RANGE: 0,9 - 90 U/MIN
CONTROL: SIEMENS 802 D
FEED: 0 - 4000 MM/MIN
DRIVE MOTOR: 75 KW
LONGITUDINAL FEED: 6000 MM
CROSS TRAVEL: 1500 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 62 T
DIMENSIONS OF THE MACHINE CA.: 16,5 X 5,2 X 3,1 M
COMPLETELY OVERHAULED FACING LATHE
EQUIPPED WITH:
- CNC CONTROL SIEMENS 802D
- HEIDENHAIN SCALES IN X AND Z AXIS
- NEW BALLSCREWS, NEWLY REGRINDED GUIDEWAYS, NEW HYDRAULICS, ELECTRICS,
LUBRICATION




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed:  mm<br/>turning diameter over slide rest:  mm<br/>turning length:  mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>4-jaw face plate diameter 1600mm<br/>3 way bed<br/>headstock and bed are separate<br/>bed consist of 3 pieces<br/>2 supports<br/>2 steady rests diameter 100-600mm<br/>digital read out at support 1 and support 2<br/>tail stock<br/><br/>technische daten / technical details:<br/>drehdurchmesser über fundament/ rotary diameter over foundation    2500    mm<br/>drehdurchmesser über bett / rotary diameter over bed    2000    mm<br/>drehlänge / turning length    10000    mm<br/>werkstückgewicht zwischen spitzen / workpiece weight between centers    16000   <br/> kg<br/>antriebsleistung / drive capacity    50    kw<br/>gewicht ca. / weight ca.    60    to<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: MM
TURNING DIAMETER OVER SLIDE REST: MM
TURNING LENGTH: MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
4-JAW FACE PLATE DIAMETER 1600MM
3 WAY BED
HEADSTOCK AND BED ARE SEPARATE
BED CONSIST OF 3 PIECES
2 SUPPORTS
2 STEADY RESTS DIAMETER 100-600MM
DIGITAL READ OUT AT SUPPORT 1 AND SUPPORT 2
TAIL STOCK

TECHNISCHE DATEN / TECHNICAL DETAILS:
DREHDURCHMESSER üBER FUNDAMENT/ ROTARY DIAMETER OVER FOUNDATION 2500 MM
DREHDURCHMESSER üBER BETT / ROTARY DIAMETER OVER BED 2000 MM
DREHLäNGE / TURNING LENGTH 10000 MM
WERKSTüCKGEWICHT ZWISCHEN SPITZEN / WORKPIECE WEIGHT BETWEEN CENTERS 16000
KG
ANTRIEBSLEISTUNG / DRIVE CAPACITY 50 KW
GEWICHT CA. / WEIGHT CA. 60 TO
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-faceplate diameter: 1.250 mm<br/>turning speed range: 4 - 180 u/min<br/>feed range: 0,063 - 1,4 mm/u<br/>rapid speed: 2,2 m/min<br/>manufacturer: wmw zerbst<br/>type: dp 1250<br/>year of construction: 1974 / used<br/>machine no .: 33-0434<br/><br/>biggest turning Ø v. d. bed: 1,250 mm<br/>face plate Ø: 1,250 mm<br/>speed range: 4 - 180 rpm<br/>feed range: 0.063 - 1.4 mm / rev<br/>rapid traverse speed: 2.2 m / min<br/><br/>weight (control cabinet): approx. 200 kg<br/>installation dimensions lxwxh: approx. 2,700 x 1,950 x 1,800 mm<br/>main propulsion engine power: 18.5 kw<br/>weight (machine): approx. 5,960 kg<br/><br/><br/>further information:<br/><br/>? fixed transverse bed<br/><br/>? incl. control cabinet<br/><br/>? incl. work lamp<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 1.250 MM
TURNING SPEED RANGE: 4 - 180 U/MIN
FEED RANGE: 0,063 - 1,4 MM/U
RAPID SPEED: 2,2 M/MIN
MANUFACTURER: WMW ZERBST
TYPE: DP 1250
YEAR OF CONSTRUCTION: 1974 / USED
MACHINE NO .: 33-0434

BIGGEST TURNING Ø V. D. BED: 1,250 MM
FACE PLATE Ø: 1,250 MM
SPEED RANGE: 4 - 180 RPM
FEED RANGE: 0.063 - 1.4 MM / REV
RAPID TRAVERSE SPEED: 2.2 M / MIN

WEIGHT (CONTROL CABINET): APPROX. 200 KG
INSTALLATION DIMENSIONS LXWXH: APPROX. 2,700 X 1,950 X 1,800 MM
MAIN PROPULSION ENGINE POWER: 18.5 KW
WEIGHT (MACHINE): APPROX. 5,960 KG


FURTHER INFORMATION:

? FIXED TRANSVERSE BED

? INCL. CONTROL CABINET

? INCL. WORK LAMP




Vendedor: SKM Industriemaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ZERBST types: