44 ofertas

Año de construcción: usado
Ubicación: Land-in good technical condition.
pressing force: 10t
operating pressure: 125 atm
power consumption: 4,5 kw
dimensions (l x w x h): 1300 x 1000 x 2200 mm
machine weight: 1000 kg IN GOOD TECHNICAL CONDITION. PRESSING FORCE: 10T OPERATING PRESSURE: 125 ATM POWER CONSUMPTION: 4,5 KW DIMENSIONS (L X W X H): 1300 X 1000 X 2200 MM MACHINE WEIGHT: 1000 KG
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-NL Netherlands, 7461A Rijssen
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-capacity main cylinder	:	250	ton
capacity deep draw cushion	:	100	ton
table dimension	:	900 x 630	mm
table height above the floor	: 	800	mm
ram dimension	:	750 x 450	mm
shut height max.	:	800	mm
throat depth		: 	360	mm
stroke, main cylinder	:	500	mm
stroke, deep draw cushion	:	200	mm
speed		:	110 (down) 	mm/sec.
			:	200 (up)	mm/sec.
work speed downwards	:	9	mm/sec.
motor power	:	18,5	kw
connection power	:	20,5	kw
dimensions of the machine wxdxh	:	1,3 x 2,0 x 3,8	m
weight of the machine ca.	:	8.000	kg
control		:	
the machine is equipped with;
•	2 hands -feedpedal

 CAPACITY MAIN CYLINDER : 250 TON CAPACITY DEEP DRAW CUSHION : 100 TON TABLE DIMENSION : 900 X 630 MM TABLE HEIGHT ABOVE THE FLOOR : 800 MM RAM DIMENSION : 750 X 450 MM SHUT HEIGHT MAX. : 800 MM THROAT DEPTH : 360 MM STROKE, MAIN CYLINDER : 500 MM STROKE, DEEP DRAW CUSHION : 200 MM SPEED : 110 (DOWN) MM/SEC. : 200 (UP) MM/SEC. WORK SPEED DOWNWARDS : 9 MM/SEC. MOTOR POWER : 18,5 KW CONNECTION POWER : 20,5 KW DIMENSIONS OF THE MACHINE WXDXH : 1,3 X 2,0 X 3,8 M WEIGHT OF THE MACHINE CA. : 8.000 KG CONTROL : THE MACHINE IS EQUIPPED WITH; • 2 HANDS -FEEDPEDAL
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-NL Netherlands, 7461A Rijssen
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-capacity		:	100	ton
table dimensions	:	1.250 x 900	mm
table height	:	735	mm
ram dimensions	:	1.100 x 750	mm
shut height max.	:	1.000	mm
throat		:	500	mm
stroke		:	500	mm
working speed down	:	9	mm/sec.
connection power	:	17,0	kw
dimensions machine wxdxh	:	1,25 x 2,08 x 3,44	m
weight machine ca.	:	9.000	kg
control		:	el.
machine is equipped with
•	guide rods on ram
   CAPACITY : 100 TON TABLE DIMENSIONS : 1.250 X 900 MM TABLE HEIGHT : 735 MM RAM DIMENSIONS : 1.100 X 750 MM SHUT HEIGHT MAX. : 1.000 MM THROAT : 500 MM STROKE : 500 MM WORKING SPEED DOWN : 9 MM/SEC. CONNECTION POWER : 17,0 KW DIMENSIONS MACHINE WXDXH : 1,25 X 2,08 X 3,44 M WEIGHT MACHINE CA. : 9.000 KG CONTROL : EL. MACHINE IS EQUIPPED WITH • GUIDE RODS ON RAM
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-NL Netherlands, 7461A Rijssen
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-capacity main cylinder	: 	160	ton
capacity deep draw cushion	: 	63	ton
table height above the floor	: 	800	mm
table dimensions	: 	1.250 x 630	mm
ram dimension	:	 850 x 450	mm
shut height max.	: 	800	mm
throat depth	: 	: 	360	mm
stroke, main cylinder	: 	500	mm
stroke, deep draw cushion	: 	200	mm
speed		: 	(down) 125	mm/sec.
			: 	(up) 125	mm/sec.
work speed downwards	: 	9	mm/sec.
motor power	: 	15	kw
connection power	: 	17	kw
dimensions of the machine wxdxh	: 	2,00 x 1,40 x 3,45	m
weight of the machine ca.	: 	7.000	kg
control		: 	elec. 2 hand / foot. 	
 CAPACITY MAIN CYLINDER : 160 TON CAPACITY DEEP DRAW CUSHION : 63 TON TABLE HEIGHT ABOVE THE FLOOR : 800 MM TABLE DIMENSIONS : 1.250 X 630 MM RAM DIMENSION : 850 X 450 MM SHUT HEIGHT MAX. : 800 MM THROAT DEPTH : : 360 MM STROKE, MAIN CYLINDER : 500 MM STROKE, DEEP DRAW CUSHION : 200 MM SPEED : (DOWN) 125 MM/SEC. : (UP) 125 MM/SEC. WORK SPEED DOWNWARDS : 9 MM/SEC. MOTOR POWER : 15 KW CONNECTION POWER : 17 KW DIMENSIONS OF THE MACHINE WXDXH : 2,00 X 1,40 X 3,45 M WEIGHT OF THE MACHINE CA. : 7.000 KG CONTROL : ELEC. 2 HAND / FOOT.
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-pressure:63 t<br/>throat:310 mm<br/>stroke:8-120 mm<br/>ram adjustment:70 mm<br/>table-size:780 x 600 mm<br/>dayligth:560 mm<br/>ram surface:500 x 410 mm<br/>no. of strokes:135 hub/min<br/>total power requirement:12 kw<br/>weight of the machine ca.:5,5 t<br/>dimensions of the machine ca.: m<br/><br/> PRESSURE:63 T
THROAT:310 MM
STROKE:8-120 MM
RAM ADJUSTMENT:70 MM
TABLE-SIZE:780 X 600 MM
DAYLIGTH:560 MM
RAM SURFACE:500 X 410 MM
NO. OF STROKES:135 HUB/MIN
TOTAL POWER REQUIREMENT:12 KW
WEIGHT OF THE MACHINE CA.:5,5 T
DIMENSIONS OF THE MACHINE CA.: M

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Ubicación: Land-capacity main cylinder	:	250	ton
capacity deep draw cushion	:	100	ton
table dimensions	:	900 x 630	mm
table height above the floor	:	800	mm
ram dimensions	:	750 x 450	mm
shut height max.	:	800	mm
throat depth	: 	360	mm
stroke, main cylinder	:	500	mm
stroke, deep draw cushion	:	200	mm
speed		:	 (down)  200	mm/sec.
			:	(up)  220	mm/sec.
work speed downwards	:	9	mm/sec.
motor power	:	22	kw
connection power	:	24	kw
dimensions of the machine wxdxh	:	1,30 x 2,00 x 3,80	m
weight of the machine ca.	:	8.500	kg
the machine is equipped with;

-	2 hands- foot control.
-	single- continuous stroke.
-	adjustable pressure and stroke.
     -    timer
 CAPACITY MAIN CYLINDER : 250 TON CAPACITY DEEP DRAW CUSHION : 100 TON TABLE DIMENSIONS : 900 X 630 MM TABLE HEIGHT ABOVE THE FLOOR : 800 MM RAM DIMENSIONS : 750 X 450 MM SHUT HEIGHT MAX. : 800 MM THROAT DEPTH : 360 MM STROKE, MAIN CYLINDER : 500 MM STROKE, DEEP DRAW CUSHION : 200 MM SPEED : (DOWN) 200 MM/SEC. : (UP) 220 MM/SEC. WORK SPEED DOWNWARDS : 9 MM/SEC. MOTOR POWER : 22 KW CONNECTION POWER : 24 KW DIMENSIONS OF THE MACHINE WXDXH : 1,30 X 2,00 X 3,80 M WEIGHT OF THE MACHINE CA. : 8.500 KG THE MACHINE IS EQUIPPED WITH; - 2 HANDS- FOOT CONTROL. - SINGLE- CONTINUOUS STROKE. - ADJUSTABLE PRESSURE AND STROKE. - TIMER
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-pressure: 63 t<br/>distance between columns: 320 mm<br/>stroke: 8 - 120 mm<br/>table surface area: 800 x 600 mm<br/>ram surface: 500 x 400 mm<br/>ram - range of adjustment: 70 mm<br/>throat: 315 mm<br/>no. of strokes: 56 / 90 hub/min<br/>distance table/ram: max. 560 mm<br/>total power requirement: 6 kw<br/>weight of the machine ca.: 5 t<br/>dimensions: 1,84 x 1,35 x 2,76 m<br/><br/><br/><br/><br/> PRESSURE: 63 T
DISTANCE BETWEEN COLUMNS: 320 MM
STROKE: 8 - 120 MM
TABLE SURFACE AREA: 800 X 600 MM
RAM SURFACE: 500 X 400 MM
RAM - RANGE OF ADJUSTMENT: 70 MM
THROAT: 315 MM
NO. OF STROKES: 56 / 90 HUB/MIN
DISTANCE TABLE/RAM: MAX. 560 MM
TOTAL POWER REQUIREMENT: 6 KW
WEIGHT OF THE MACHINE CA.: 5 T
DIMENSIONS: 1,84 X 1,35 X 2,76 M




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-capacity main cylinder	:	100	ton
capacity deep draw cushion	:	40	ton
table dimensions	:	750 x 560	mm
table height above the floor	: 	710	mm
ram dimension	:	530 x 400	mm
shut height max.	:	800	mm
throat depth		: 	360	mm
stroke, main cylinder	:	500	mm
stroke, deep draw cushion	:	200	mm
speed		:	  320 (down)  	mm/sec.
			:	200 (up) 	mm/sec.
motor power	:	17	kw
dimensions of the machine wxdxh	:	1,37 x 1,73 x 3,20	m
weight of the machine ca.	:	5.000	kg
control		: 	 2 hand / foot.
 CAPACITY MAIN CYLINDER : 100 TON CAPACITY DEEP DRAW CUSHION : 40 TON TABLE DIMENSIONS : 750 X 560 MM TABLE HEIGHT ABOVE THE FLOOR : 710 MM RAM DIMENSION : 530 X 400 MM SHUT HEIGHT MAX. : 800 MM THROAT DEPTH : 360 MM STROKE, MAIN CYLINDER : 500 MM STROKE, DEEP DRAW CUSHION : 200 MM SPEED : 320 (DOWN) MM/SEC. : 200 (UP) MM/SEC. MOTOR POWER : 17 KW DIMENSIONS OF THE MACHINE WXDXH : 1,37 X 1,73 X 3,20 M WEIGHT OF THE MACHINE CA. : 5.000 KG CONTROL : 2 HAND / FOOT.
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-pressure: 160 t<br/>throat: 350 mm<br/>stroke: 500 mm<br/>table surface area: 1190x700 mm<br/>ram surface: 400x400 mm<br/>hole in the table: 150x150 mm<br/>table height: 750mm mm<br/>tool hole in ram: Ø 50 mm<br/>dayligth: im ot 800 mm<br/>weight of the machine ca.: 8,0 t<br/>dimensions of the machine ca.: bxtxh 1500x2000x3100 mm<br/><br/><br/><br/><br/> PRESSURE: 160 T
THROAT: 350 MM
STROKE: 500 MM
TABLE SURFACE AREA: 1190X700 MM
RAM SURFACE: 400X400 MM
HOLE IN THE TABLE: 150X150 MM
TABLE HEIGHT: 750MM MM
TOOL HOLE IN RAM: Ø 50 MM
DAYLIGTH: IM OT 800 MM
WEIGHT OF THE MACHINE CA.: 8,0 T
DIMENSIONS OF THE MACHINE CA.: BXTXH 1500X2000X3100 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-nominal capacity, t.                          63
nominal capacity by each position, t.         20
max. stroke of cushion, mm:                   18 - 56
ram stroke, mm:                               280
distance between uprights, mm                 2200
stamping position:                            12
distance between position, mm                 180
table dimensions, mm                          2200
number of positions with cut pos.             12
adjustment of tool holder in ram, mm          50
closed high, mm                               430 mm
shut height, mm                               710 mm.
weidth of coil, max., mm                      280
max. Ø  stamppcs., mm:                        140 - 200
motor, kw:                                    20  
press dimensions:                             4500 x 3500 x 4300 mm.

    - subject to prior sale -  
    - with the right for shorthand, technical mistakes and typos, not-binding -

we remain at your disposal for any question you may have. NOMINAL CAPACITY, T. 63 NOMINAL CAPACITY BY EACH POSITION, T. 20 MAX. STROKE OF CUSHION, MM: 18 - 56 RAM STROKE, MM: 280 DISTANCE BETWEEN UPRIGHTS, MM 2200 STAMPING POSITION: 12 DISTANCE BETWEEN POSITION, MM 180 TABLE DIMENSIONS, MM 2200 NUMBER OF POSITIONS WITH CUT POS. 12 ADJUSTMENT OF TOOL HOLDER IN RAM, MM 50 CLOSED HIGH, MM 430 MM SHUT HEIGHT, MM 710 MM. WEIDTH OF COIL, MAX., MM 280 MAX. Ø STAMPPCS., MM: 140 - 200 MOTOR, KW: 20 PRESS DIMENSIONS: 4500 X 3500 X 4300 MM. - SUBJECT TO PRIOR SALE - - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING - WE REMAIN AT YOUR DISPOSAL FOR ANY QUESTION YOU MAY HAVE.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-table length: 710 mm<br/>table width: 710 mm<br/>table height: 700 mm<br/>swivel movement: 90 grad<br/>total power requirement:   kw<br/>weight of the machine ca.: 0,56 t<br/>dimensions of the machine ca.:   m<br/>? adjustable bore cube,<br/>(at one edge there is a breakage at the t-slot)<br/><br/><br/><br/> TABLE LENGTH: 710 MM
TABLE WIDTH: 710 MM
TABLE HEIGHT: 700 MM
SWIVEL MOVEMENT: 90 GRAD
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,56 T
DIMENSIONS OF THE MACHINE CA.: M
? ADJUSTABLE BORE CUBE,
(AT ONE EDGE THERE IS A BREAKAGE AT THE T-SLOT)



Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-nominal capacity, t.	                63
nominal capacity by each position, t.	20
max. stroke of cushion, mm:		80	 
ram stroke , min – 1      		18 - 56
ram stroke, mm:          	        280
distance between uprights, mm	        2200
stamping position:               	12
distance between position, mm	        180
table dimensions, mm                    2200
number of positions with cut pos.	12
adjustment of tool holder in ram, mm    50
closed high, mm                         430 mm
shut height, mm	                        710 mm.
weidth of coil, max., mm		280
max. Ø  stamppcs., mm:	                140 - 200
motor, kw:				20  
press dimensions:                       4500 x 3500 x 4300 mm.

- subject to prior sale -  
- with the right for shorthand, technical mistakes and typos, not-binding -

we remain at your disposal for any question you may have. NOMINAL CAPACITY, T. 63 NOMINAL CAPACITY BY EACH POSITION, T. 20 MAX. STROKE OF CUSHION, MM: 80 RAM STROKE , MIN – 1 18 - 56 RAM STROKE, MM: 280 DISTANCE BETWEEN UPRIGHTS, MM 2200 STAMPING POSITION: 12 DISTANCE BETWEEN POSITION, MM 180 TABLE DIMENSIONS, MM 2200 NUMBER OF POSITIONS WITH CUT POS. 12 ADJUSTMENT OF TOOL HOLDER IN RAM, MM 50 CLOSED HIGH, MM 430 MM SHUT HEIGHT, MM 710 MM. WEIDTH OF COIL, MAX., MM 280 MAX. Ø STAMPPCS., MM: 140 - 200 MOTOR, KW: 20 PRESS DIMENSIONS: 4500 X 3500 X 4300 MM. - SUBJECT TO PRIOR SALE - - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING - WE REMAIN AT YOUR DISPOSAL FOR ANY QUESTION YOU MAY HAVE.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-pressure:100 t<br/>throat:355 mm<br/>stroke:8 - 130 mm<br/>surface area:710 x 900 mm<br/>distance table/ram:max. 460 mm<br/>min/max distance clamping table to ram at max. stroke:260 / 340 mm<br/>clamping plate thickness:75 mm<br/>hole in the table:180 mm<br/>no. of strokes:50 - 80 hub/min<br/>ram adjustment:80 mm<br/>dimension of ram:450 x 560 mm<br/>total power requirement: kw<br/>weight of the machine ca.:9,4 t<br/>dimensions of the machine ca.:2,25 x 1,65 x 3,05 m<br/><br/> PRESSURE:100 T
THROAT:355 MM
STROKE:8 - 130 MM
SURFACE AREA:710 X 900 MM
DISTANCE TABLE/RAM:MAX. 460 MM
MIN/MAX DISTANCE CLAMPING TABLE TO RAM AT MAX. STROKE:260 / 340 MM
CLAMPING PLATE THICKNESS:75 MM
HOLE IN THE TABLE:180 MM
NO. OF STROKES:50 - 80 HUB/MIN
RAM ADJUSTMENT:80 MM
DIMENSION OF RAM:450 X 560 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.:9,4 T
DIMENSIONS OF THE MACHINE CA.:2,25 X 1,65 X 3,05 M

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Ubicación: Land-preliminary information:

no. 4659: 

1 used eccentric press - single column
make wmw zeulenroda, type ped 100 / 3
new in 1984 with die cushions
work range: table top 900 x 700 mm

 PRELIMINARY INFORMATION: NO. 4659: 1 USED ECCENTRIC PRESS - SINGLE COLUMN MAKE WMW ZEULENRODA, TYPE PED 100 / 3 NEW IN 1984 WITH DIE CUSHIONS WORK RANGE: TABLE TOP 900 X 700 MM
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-capacity: 100 ton ram stroke: 6 - 82 mm ram adjustment: 100 mm table surface area : 1.200 x 710 mm ram surface area: 900 x 500 mm number of strokes: 50 / 200 s.p.m. required power: 18,5 kw dimensions l x w x h: 2700 x 2400 x 3500 mm weight of machine approx.: 13,5 ton CAPACITY: 100 TON RAM STROKE: 6 - 82 MM RAM ADJUSTMENT: 100 MM TABLE SURFACE AREA : 1.200 X 710 MM RAM SURFACE AREA: 900 X 500 MM NUMBER OF STROKES: 50 / 200 S.P.M. REQUIRED POWER: 18,5 KW DIMENSIONS L X W X H: 2700 X 2400 X 3500 MM WEIGHT OF MACHINE APPROX.: 13,5 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Ubicación: Land-manufactured by veb zeulenroda (germany)
capacity, ton 160
ram stroke, mm 500
ram downward movement, mm/s 200
ram upward movement, mm/s 125
shut height, mm 1000
throat depth, mm 360
table size, mm 900 x 630
ram size, mm 450 x 700
power required, kw 17
press weight, kg 7000

the press is in nice condition. it is fully complete. MANUFACTURED BY VEB ZEULENRODA (GERMANY) CAPACITY, TON 160 RAM STROKE, MM 500 RAM DOWNWARD MOVEMENT, MM/S 200 RAM UPWARD MOVEMENT, MM/S 125 SHUT HEIGHT, MM 1000 THROAT DEPTH, MM 360 TABLE SIZE, MM 900 X 630 RAM SIZE, MM 450 X 700 POWER REQUIRED, KW 17 PRESS WEIGHT, KG 7000 THE PRESS IS IN NICE CONDITION. IT IS FULLY COMPLETE.
Vendedor: SCG, uab
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>throat:360 mm<br/>stroke:500 mm<br/>table surface area:900 x 630 mm<br/>ram surface:750 x 450 mm<br/>daylight dimension : table/slide   up:800 mm<br/>hole in the table:200 mm<br/>table height over floor:800 mm<br/>feed down:200 mm/sec<br/>feed up:125 mm/sec<br/>total power requirement:17 kw<br/>weight of the machine ca.:7 t<br/>dimensions of the machine ca.:1,25 x 2,2 x 3,45 m<br/><br/> PRESSURE:160 T
THROAT:360 MM
STROKE:500 MM
TABLE SURFACE AREA:900 X 630 MM
RAM SURFACE:750 X 450 MM
DAYLIGHT DIMENSION : TABLE/SLIDE UP:800 MM
HOLE IN THE TABLE:200 MM
TABLE HEIGHT OVER FLOOR:800 MM
FEED DOWN:200 MM/SEC
FEED UP:125 MM/SEC
TOTAL POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:7 T
DIMENSIONS OF THE MACHINE CA.:1,25 X 2,2 X 3,45 M

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-maximum pressing force 40 t
-maximum piston stroke 500 mm
-hoisting speed 0-6 m / min
-return 0-27 m / min
-height 1000 mm
-projection up to mid slide 360 mm
-slide clamping surface 460 x 360 mm
-slide clamping pins 40 mm
-table size 630 x 500 mm
-table hole / breakthrough 180 mm
-table height above floor 700 mm
-oil quantity approx.						  300 ltr
	-drive 400 v / 11 kw
	-space requirement approx.		         b h 1150 x 3200 x 1750 mm
	-weight approx.						3800 kg
	-with:-two hand disengagement
-e - foot switch
 TECHNICAL DATA: -MAXIMUM PRESSING FORCE 40 T -MAXIMUM PISTON STROKE 500 MM -HOISTING SPEED 0-6 M / MIN -RETURN 0-27 M / MIN -HEIGHT 1000 MM -PROJECTION UP TO MID SLIDE 360 MM -SLIDE CLAMPING SURFACE 460 X 360 MM -SLIDE CLAMPING PINS 40 MM -TABLE SIZE 630 X 500 MM -TABLE HOLE / BREAKTHROUGH 180 MM -TABLE HEIGHT ABOVE FLOOR 700 MM -OIL QUANTITY APPROX. 300 LTR -DRIVE 400 V / 11 KW -SPACE REQUIREMENT APPROX. B H 1150 X 3200 X 1750 MM -WEIGHT APPROX. 3800 KG -WITH:-TWO HAND DISENGAGEMENT -E - FOOT SWITCH
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>throat:360 mm<br/>stroke:500 mm<br/>total power requirement:17 kw<br/>weight of the machine ca.:7,2 t<br/>dimensions of the machine ca.:2,0 x  0,95 x 3,70  m<br/>table-size:900 x 630 mm<br/>documents:vorhanden  <br/><br/> PRESSURE:160 T
THROAT:360 MM
STROKE:500 MM
TOTAL POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:7,2 T
DIMENSIONS OF THE MACHINE CA.:2,0 X 0,95 X 3,70 M
TABLE-SIZE:900 X 630 MM
DOCUMENTS:VORHANDEN

Vendedor: Pagus Maschinenhandel
Año de construcción: usado
Ubicación: Land-technical data:

-maximum pressing force 40 t
-maximum piston stroke 500 mm
-hoisting speed 0-40 mm / s
-return 0-200 m / min
-mounting height 750 mm
-projection up to mid slide 360 mm
-slide clamping surface 440 x 360 mm
-slide clamping pins 40 mm
-table size 630 x 500 mm
-table hole / breakthrough 200 mm
-table height above floor 710 mm
-oil quantity approx.						  	  300 ltr
	-drive 400 v / 4 kw
	-space requirement approx.			        b h 1200 x 2800 x 1600 mm
	-weight approx.							2500 kg
 TECHNICAL DATA: -MAXIMUM PRESSING FORCE 40 T -MAXIMUM PISTON STROKE 500 MM -HOISTING SPEED 0-40 MM / S -RETURN 0-200 M / MIN -MOUNTING HEIGHT 750 MM -PROJECTION UP TO MID SLIDE 360 MM -SLIDE CLAMPING SURFACE 440 X 360 MM -SLIDE CLAMPING PINS 40 MM -TABLE SIZE 630 X 500 MM -TABLE HOLE / BREAKTHROUGH 200 MM -TABLE HEIGHT ABOVE FLOOR 710 MM -OIL QUANTITY APPROX. 300 LTR -DRIVE 400 V / 4 KW -SPACE REQUIREMENT APPROX. B H 1200 X 2800 X 1600 MM -WEIGHT APPROX. 2500 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-pressure:250 t<br/>passage width:1280 mm<br/>stroke:bis 500 mm<br/>total power requirement:47 kw<br/>weight of the machine ca.:23 t<br/>dimensions of the machine ca.:2200 x 1850 x 4600 mm<br/>table surface area:1250 x 1000 mm<br/>dayligth:800 mm<br/>daylight between the side columns:520 x 750 mm<br/>table  height above floor:1000 mm<br/>documents: vorhanden <br/><br/> PRESSURE:250 T
PASSAGE WIDTH:1280 MM
STROKE:BIS 500 MM
TOTAL POWER REQUIREMENT:47 KW
WEIGHT OF THE MACHINE CA.:23 T
DIMENSIONS OF THE MACHINE CA.:2200 X 1850 X 4600 MM
TABLE SURFACE AREA:1250 X 1000 MM
DAYLIGTH:800 MM
DAYLIGHT BETWEEN THE SIDE COLUMNS:520 X 750 MM
TABLE HEIGHT ABOVE FLOOR:1000 MM
DOCUMENTS: VORHANDEN

Vendedor: Pagus Maschinenhandel
Año de construcción: usado
Ubicación: Land-hydraulic single change press with ejectors, second-hand
              hydraulic cap type press with ejector, used
type / type: pye 160 s 1
year of construction / new in: 1988
manufacturer / make: wema zeulenroda
pressing power / rated pressure: 160 t
table size / table size: 900 x 630 mm
plunger clamping surface / slide surface: 750 x 450 mm
radius / depth of cap: 360 mm
installation height / height of table: 800 mm
maximum piston stroke / maximum piston stroke: up to 500 mm
pressure piston diameter / diam. of piston: 400/360 mm
plunger speed down /.
  downward speed of slide: 200 mm / sec
weight / weight: 7t
power consumption / connected load: 17 kw
HYDRAULIC SINGLE CHANGE PRESS WITH EJECTORS, SECOND-HAND HYDRAULIC CAP TYPE PRESS WITH EJECTOR, USED TYPE / TYPE: PYE 160 S 1 YEAR OF CONSTRUCTION / NEW IN: 1988 MANUFACTURER / MAKE: WEMA ZEULENRODA PRESSING POWER / RATED PRESSURE: 160 T TABLE SIZE / TABLE SIZE: 900 X 630 MM PLUNGER CLAMPING SURFACE / SLIDE SURFACE: 750 X 450 MM RADIUS / DEPTH OF CAP: 360 MM INSTALLATION HEIGHT / HEIGHT OF TABLE: 800 MM MAXIMUM PISTON STROKE / MAXIMUM PISTON STROKE: UP TO 500 MM PRESSURE PISTON DIAMETER / DIAM. OF PISTON: 400/360 MM PLUNGER SPEED DOWN /. DOWNWARD SPEED OF SLIDE: 200 MM / SEC WEIGHT / WEIGHT: 7T POWER CONSUMPTION / CONNECTED LOAD: 17 KW
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-<br>capacity: 250 t<br>stroke: 10 mm<br>distance column/center (throat): 360 mm<br>table length: 900 mm<br>table width: 630 mm <br><p>make   wmw zeulenroda</p>
<p>type     pye 250 n</p>
<p>year    80 er</p>
<p>specifications</p>
<p>hydraulic / mechanical </p>
<p>hydraulicpress force   250 ton</p>
<p>table length x width  900 x 630 mm</p>
<p>throat360 mm</p>
<p>die height   1000 mm</p>
<p>stroke length   500 mm</p>
<p>power  11 kw</p>
<p>dimensions</p>
<p>length    1250 mm</p>
<p>width     2000 mm</p>
<p>height   3800 mm</p>
<p>
CAPACITY: 250 T
STROKE: 10 MM
DISTANCE COLUMN/CENTER (THROAT): 360 MM
TABLE LENGTH: 900 MM
TABLE WIDTH: 630 MM

MAKE&NBSP; &NBSP;WMW ZEULENRODA

TYPE&NBSP; &NBSP; &NBSP;PYE 250 N

YEAR&NBSP; &NBSP; 80 ER

SPECIFICATIONS

HYDRAULIC / MECHANICAL

HYDRAULICPRESS FORCE&NBSP; &NBSP;250 TON

TABLE LENGTH X WIDTH&NBSP; 900 X 630 MM

THROAT360 MM

DIE HEIGHT&NBSP; &NBSP;1000 MM

STROKE LENGTH&NBSP; &NBSP;500 MM

POWER&NBSP; 11 KW

DIMENSIONS

LENGTH&NBSP; &NBSP; 1250 MM

WIDTH&NBSP; &NBSP; &NBSP;2000 MM

HEIGHT&NBSP; &NBSP;3800 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-once change hydraulic press, used
              hydraulic cap type press, used

type / type: pye 250 s 1 m
year of construction / new in: 1994
manufacturer / make: zeulenroda gmbh
pressing power / rated pressure: 250 t
table size / table size: 1250 x 630 mm
table break / hole in table: 250 mm diameter. / diam. 
plunger clamping surface / slide surface: 850 x 450 mm
radius / depth of cap: 360 mm
installation height / height of table: 800 mm
maximum piston stroke / maximum piston stroke: up to 500 mm
pressure piston diameter / diam. of piston: 400/360 mm
plunger speed down /.
  downward speed of slide: 200 mm / sec
plunger speed up /.
  upward speed of slide: 110 mm / sec
weight / weight: 8t
power consumption / connected load: 20,5 kw
ONCE CHANGE HYDRAULIC PRESS, USED HYDRAULIC CAP TYPE PRESS, USED TYPE / TYPE: PYE 250 S 1 M YEAR OF CONSTRUCTION / NEW IN: 1994 MANUFACTURER / MAKE: ZEULENRODA GMBH PRESSING POWER / RATED PRESSURE: 250 T TABLE SIZE / TABLE SIZE: 1250 X 630 MM TABLE BREAK / HOLE IN TABLE: 250 MM DIAMETER. / DIAM. PLUNGER CLAMPING SURFACE / SLIDE SURFACE: 850 X 450 MM RADIUS / DEPTH OF CAP: 360 MM INSTALLATION HEIGHT / HEIGHT OF TABLE: 800 MM MAXIMUM PISTON STROKE / MAXIMUM PISTON STROKE: UP TO 500 MM PRESSURE PISTON DIAMETER / DIAM. OF PISTON: 400/360 MM PLUNGER SPEED DOWN /. DOWNWARD SPEED OF SLIDE: 200 MM / SEC PLUNGER SPEED UP /. UPWARD SPEED OF SLIDE: 110 MM / SEC WEIGHT / WEIGHT: 8T POWER CONSUMPTION / CONNECTED LOAD: 20,5 KW
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-pressure:100 t<br/>throat:355 mm<br/>stroke:8 - 130 mm<br/>no. of strokes:50/80 hub/min<br/>table surface area:710 x 1200 mm<br/>hole in the table:360 mm<br/>t-slots:3 <br/>distance between table and ram (stroke down, adjustment up):540 mm<br/>ram adjustment:80 mm<br/>ram surface:450 x 560 mm<br/>mortise in ram (Ø x depth):50 x 100 mm<br/>distance between columns:400 mm<br/>total power requirement:11,5 kw<br/>weight of the machine ca.:9 t<br/>dimensions of the machine ca.:1,65 x 2,25 x 3,05 m<br/><br/> PRESSURE:100 T
THROAT:355 MM
STROKE:8 - 130 MM
NO. OF STROKES:50/80 HUB/MIN
TABLE SURFACE AREA:710 X 1200 MM
HOLE IN THE TABLE:360 MM
T-SLOTS:3
DISTANCE BETWEEN TABLE AND RAM (STROKE DOWN, ADJUSTMENT UP):540 MM
RAM ADJUSTMENT:80 MM
RAM SURFACE:450 X 560 MM
MORTISE IN RAM (Ø X DEPTH):50 X 100 MM
DISTANCE BETWEEN COLUMNS:400 MM
TOTAL POWER REQUIREMENT:11,5 KW
WEIGHT OF THE MACHINE CA.:9 T
DIMENSIONS OF THE MACHINE CA.:1,65 X 2,25 X 3,05 M

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Precio: 2.200 €
Ubicación: Land-pressing force: 10t<br/>  table surface: 400 x 450 mm<br/>  pusher plate: 200 x 200 mm<br/>  throat depth: 255 mm<br/>  diarrhea hole: 140 mm<br/>  table-slide the maximum distance: 500 mm<br/>  stroke: 400 mm<br/>  speed down: 100 mm / s<br/>  speed up: 355 mm / s<br/>  connection: 4,5 kw<br/>  accessories: condition: good<br/>  weight: 1,2 t<br/>  dimensions: 700 x 1200 x 2,200 mm PRESSING FORCE: 10T
TABLE SURFACE: 400 X 450 MM
PUSHER PLATE: 200 X 200 MM
THROAT DEPTH: 255 MM
DIARRHEA HOLE: 140 MM
TABLE-SLIDE THE MAXIMUM DISTANCE: 500 MM
STROKE: 400 MM
SPEED DOWN: 100 MM / S
SPEED UP: 355 MM / S
CONNECTION: 4,5 KW
ACCESSORIES: CONDITION: GOOD
WEIGHT: 1,2 T
DIMENSIONS: 700 X 1200 X 2,200 MM
Vendedor: Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Año de construcción: usado
Ubicación: Land-pressure:25 t<br/>throat: mm<br/>stroke:10 - 100 mm<br/>max. distance table - ram:320 mm<br/>ram adjustment:55 mm<br/>table surface area:560 x 470 mm<br/>ram surface:250 x 180 mm<br/>table height over floor:750 mm<br/>column daylight:250 mm<br/>total power requirement: kw<br/>weight of the machine ca.:2,5 t<br/>dimensions of the machine ca.: m<br/><br/> PRESSURE:25 T
THROAT: MM
STROKE:10 - 100 MM
MAX. DISTANCE TABLE - RAM:320 MM
RAM ADJUSTMENT:55 MM
TABLE SURFACE AREA:560 X 470 MM
RAM SURFACE:250 X 180 MM
TABLE HEIGHT OVER FLOOR:750 MM
COLUMN DAYLIGHT:250 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.:2,5 T
DIMENSIONS OF THE MACHINE CA.: M

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Precio: 1.400 €
Ubicación: Land-performance: 3.15 t<br/>   <br/>  table: 280 x 280 mm<br/>   <br/>  plunger diameter: 55 mm maximum delete. table slide: 355 mm<br/>   <br/>  stroke: 280 mm<br/>   <br/>  throat depth: 150 mm<br/>  <br/>  diarrhea hole: 100 mm<br/>  <br/>  pressing speed: 0.1 m / sec<br/>  <br/>  withdrawal force: 1 t<br/>  <br/>  return speed: 0.3 m / sec<br/>   <br/>  connection: 1,5 kw<br/>   <br/>  accessories: condition: good<br/>   <br/>  weight: 0.35 t<br/>   <br/>  dimensions: 700 x 1,000 x 1,700 mm PERFORMANCE: 3.15 T

TABLE: 280 X 280 MM

PLUNGER DIAMETER: 55 MM MAXIMUM DELETE. TABLE SLIDE: 355 MM

STROKE: 280 MM

THROAT DEPTH: 150 MM

DIARRHEA HOLE: 100 MM

PRESSING SPEED: 0.1 M / SEC

WITHDRAWAL FORCE: 1 T

RETURN SPEED: 0.3 M / SEC

CONNECTION: 1,5 KW

ACCESSORIES: CONDITION: GOOD

WEIGHT: 0.35 T

DIMENSIONS: 700 X 1,000 X 1,700 MM
Vendedor: Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Año de construcción: usado
Ubicación: Land-pressure:40 t<br/>throat:360 mm<br/>stroke:500 mm<br/>distance table/ram:800 mm<br/>feed down:0,1 m/s m/s<br/>feed up:0,45 m/s m/s<br/>table surface area:630 x 500 mm<br/>ram surface:450 x 360 mm<br/>tool hole in ram:40 mm<br/>weight of the machine ca.:3,18 t<br/>dimensions of the machine ca.:1,75 x 1,15 x 2,95 m<br/>total power requirement:11 kw<br/><br/>1990 installation of a deep drawing device  the master cylinder receives a completely new set of seals (now dismantled) all seals are renewed on the machine PRESSURE:40 T
THROAT:360 MM
STROKE:500 MM
DISTANCE TABLE/RAM:800 MM
FEED DOWN:0,1 M/S M/S
FEED UP:0,45 M/S M/S
TABLE SURFACE AREA:630 X 500 MM
RAM SURFACE:450 X 360 MM
TOOL HOLE IN RAM:40 MM
WEIGHT OF THE MACHINE CA.:3,18 T
DIMENSIONS OF THE MACHINE CA.:1,75 X 1,15 X 2,95 M
TOTAL POWER REQUIREMENT:11 KW

1990 INSTALLATION OF A DEEP DRAWING DEVICE THE MASTER CYLINDER RECEIVES A COMPLETELY NEW SET OF SEALS (NOW DISMANTLED) ALL SEALS ARE RENEWED ON THE MACHINE
Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Precio: 750 €
Ubicación: Land-machine number: 65/96<br/>  type / model: pye10 sond.<br/>  pressing force: 10t<br/>  table surface: 360 x 350 mm<br/>  plunger diameter: 35 mm<br/>  projection: 225 mm<br/>  table recess: 125 x 240 mm<br/>  maximum distance table-slide: 800 mm<br/>  stroke: 500 mm<br/>  speed down: 0.053 m/s<br/>  speed up: 0.133 m/s<br/>  connection: 4,4 kw<br/>  accessories: foot switch<br/>  condition: see picture<br/>  weight: 2.2 t<br/>  dimensions: 600 x 800 x 2,200 mm MACHINE NUMBER: 65/96
TYPE / MODEL: PYE10 SOND.
PRESSING FORCE: 10T
TABLE SURFACE: 360 X 350 MM
PLUNGER DIAMETER: 35 MM
PROJECTION: 225 MM
TABLE RECESS: 125 X 240 MM
MAXIMUM DISTANCE TABLE-SLIDE: 800 MM
STROKE: 500 MM
SPEED DOWN: 0.053 M/S
SPEED UP: 0.133 M/S
CONNECTION: 4,4 KW
ACCESSORIES: FOOT SWITCH
CONDITION: SEE PICTURE
WEIGHT: 2.2 T
DIMENSIONS: 600 X 800 X 2,200 MM
Vendedor: Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Año de construcción: usado
Ubicación: Land-pressure:63 t<br/>throat:315 mm<br/>stroke:8 - 120 mm<br/>strokes in endurance, stand.:80 min-1<br/>ram adjustment:70 mm<br/>greatest distance between table & ram:417 mm<br/>table surface area:800 x 620 mm<br/>ram surface:490 x 400 mm<br/>table height:730 mm<br/>column daylight:320 mm<br/>total power requirement:5 kw<br/>weight of the machine ca.:5,5 t<br/>dimensions of the machine ca.:1,15 x 1,7 x 2,6 m<br/><br/> PRESSURE:63 T
THROAT:315 MM
STROKE:8 - 120 MM
STROKES IN ENDURANCE, STAND.:80 MIN-1
RAM ADJUSTMENT:70 MM
GREATEST DISTANCE BETWEEN TABLE & RAM:417 MM
TABLE SURFACE AREA:800 X 620 MM
RAM SURFACE:490 X 400 MM
TABLE HEIGHT:730 MM
COLUMN DAYLIGHT:320 MM
TOTAL POWER REQUIREMENT:5 KW
WEIGHT OF THE MACHINE CA.:5,5 T
DIMENSIONS OF THE MACHINE CA.:1,15 X 1,7 X 2,6 M

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Precio: 2.950 €
Ubicación: Land-serial no.: 005/4/142 force 10 t
maximum distance plunger table
voltage 380 v
control voltage 220v
power 4.5 kw
nominal current 10 a
free shipped weight 1, 1 t    SERIAL NO.: 005/4/142 FORCE 10 T MAXIMUM DISTANCE PLUNGER TABLE VOLTAGE 380 V CONTROL VOLTAGE 220V POWER 4.5 KW NOMINAL CURRENT 10 A FREE SHIPPED WEIGHT 1, 1 T
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-pressure:100 t<br/>throat:355 mm<br/>stroke:8 - 130 mm<br/>dayligth:490 mm<br/>column daylight:400 mm<br/>table-size:710 x 900 mm<br/>table fall through hole:360 mm<br/>ram surface:450 x 560 mm<br/>thickness of clamping  area:75 mm<br/>no. of strokes:50 / 80 / 100  hub/min<br/>no. of strokes at single stroke:35 / 40 hub/min<br/>weight of the machine ca.:10,1 t<br/>total power requirement:11,0 kw<br/>dimensions of the machine ca.:2,0 x 1,5 x 3,2  m<br/><br/> PRESSURE:100 T
THROAT:355 MM
STROKE:8 - 130 MM
DAYLIGTH:490 MM
COLUMN DAYLIGHT:400 MM
TABLE-SIZE:710 X 900 MM
TABLE FALL THROUGH HOLE:360 MM
RAM SURFACE:450 X 560 MM
THICKNESS OF CLAMPING AREA:75 MM
NO. OF STROKES:50 / 80 / 100 HUB/MIN
NO. OF STROKES AT SINGLE STROKE:35 / 40 HUB/MIN
WEIGHT OF THE MACHINE CA.:10,1 T
TOTAL POWER REQUIREMENT:11,0 KW
DIMENSIONS OF THE MACHINE CA.:2,0 X 1,5 X 3,2 M

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Precio: 320 €
Ubicación: Land-used electric swaging machine

wmw veb werkzeugmaschinenfabrik zeulenroda
model: ubsbh1
no./bj.: 029/2/33/59
with 6 sets of roles / beading rollers
drive motor vem
220/380 v; 1.42/0.82 a; 50 hz
0.25 kw; 100 u/min

total approx. 1350 x 600 h 1220 mm USED ELECTRIC SWAGING MACHINE WMW VEB WERKZEUGMASCHINENFABRIK ZEULENRODA MODEL: UBSBH1 NO./BJ.: 029/2/33/59 WITH 6 SETS OF ROLES / BEADING ROLLERS DRIVE MOTOR VEM 220/380 V; 1.42/0.82 A; 50 HZ 0.25 KW; 100 U/MIN TOTAL APPROX. 1350 X 600 H 1220 MM
Vendedor: Brand GmbH
Año de construcción: usado
Ubicación: Land-pressure:63 t<br/>throat: mm<br/>stroke:16-125 mm<br/>torque:1600 kpm<br/>cutting surface:1600 mm²<br/>through-put sheet thickness:3,2 mm<br/>force:250 kpm<br/>distance table/ram:562 mm<br/>adjustability of ram:70 mm<br/>table dimensions:800 x 600 mm<br/>table adjustment range:220 mm<br/>stroke -permanent runnig:80 min.-1<br/>total power requirement:6 kw<br/>weight of the machine ca.:5 t<br/><br/> PRESSURE:63 T
THROAT: MM
STROKE:16-125 MM
TORQUE:1600 KPM
CUTTING SURFACE:1600 MM²
THROUGH-PUT SHEET THICKNESS:3,2 MM
FORCE:250 KPM
DISTANCE TABLE/RAM:562 MM
ADJUSTABILITY OF RAM:70 MM
TABLE DIMENSIONS:800 X 600 MM
TABLE ADJUSTMENT RANGE:220 MM
STROKE -PERMANENT RUNNIG:80 MIN.-1
TOTAL POWER REQUIREMENT:6 KW
WEIGHT OF THE MACHINE CA.:5 T

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-pressure 100 t
table 1450 x 670 mm
max. distance table - ram                        470 mm
adjustment of ram                                      80 mm
stroke of ram                                               20 - 140 mm
area of ram                                                  560 x 460 mm
connected power                                       10,5 kw
weight                                                            9,1 t

two-hand operation  PRESSURE 100 T TABLE 1450 X 670 MM MAX. DISTANCE TABLE - RAM 470 MM ADJUSTMENT OF RAM 80 MM STROKE OF RAM 20 - 140 MM AREA OF RAM 560 X 460 MM CONNECTED POWER 10,5 KW WEIGHT 9,1 T TWO-HAND OPERATION
Vendedor: Norbert Gottwald Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-pressure:040 t<br/>throat:360 mm<br/>stroke:500 mm<br/>distance table/ram, max. stroke up, adjustment up:660 / 1000 mm<br/>table surface area:630 x 500 mm<br/>hole in the table:200 mm<br/>table height over floor:1060 / 720 mm<br/>ram surface:450 x 360 mm<br/>speed down:60 mm/s<br/>speed up:300 mm/s<br/>oil volume: l<br/>power requirement:7,5 kw<br/>weight:2,75 t<br/>dimensions (wxdxh):1,0 x 1,8 x 3,05 m<br/>list price: without putting into operation: <br/>german safety: permitted only for safe tools: <br/>additional plate in table:height approx. 340 mm <br/><br/> PRESSURE:040 T
THROAT:360 MM
STROKE:500 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:660 / 1000 MM
TABLE SURFACE AREA:630 X 500 MM
HOLE IN THE TABLE:200 MM
TABLE HEIGHT OVER FLOOR:1060 / 720 MM
RAM SURFACE:450 X 360 MM
SPEED DOWN:60 MM/S
SPEED UP:300 MM/S
OIL VOLUME: L
POWER REQUIREMENT:7,5 KW
WEIGHT:2,75 T
DIMENSIONS (WXDXH):1,0 X 1,8 X 3,05 M
LIST PRICE: WITHOUT PUTTING INTO OPERATION:
GERMAN SAFETY: PERMITTED ONLY FOR SAFE TOOLS:
ADDITIONAL PLATE IN TABLE:HEIGHT APPROX. 340 MM

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:025 t<br/>throat:355 mm<br/>stroke:500 mm<br/>distance table/ram, max. stroke up, adjustment up:800 mm<br/>table surface area:500 x 500 mm<br/>hole in the table:180 mm<br/>table height over floor:700 mm<br/>ram surface:250 x 250 mm<br/>speed down: mm/s<br/>speed up: mm/s<br/>working speed: mm/s<br/>oil volume: l<br/>power requirement:7,5 kw<br/>weight:2,1 t<br/>dimensions (wxdxh):1,45 x 0,9 x 2,55 m<br/>german safety: permitted only for safe tools: <br/>list price: without putting into operation: <br/><br/> PRESSURE:025 T
THROAT:355 MM
STROKE:500 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:800 MM
TABLE SURFACE AREA:500 X 500 MM
HOLE IN THE TABLE:180 MM
TABLE HEIGHT OVER FLOOR:700 MM
RAM SURFACE:250 X 250 MM
SPEED DOWN: MM/S
SPEED UP: MM/S
WORKING SPEED: MM/S
OIL VOLUME: L
POWER REQUIREMENT:7,5 KW
WEIGHT:2,1 T
DIMENSIONS (WXDXH):1,45 X 0,9 X 2,55 M
GERMAN SAFETY: PERMITTED ONLY FOR SAFE TOOLS:
LIST PRICE: WITHOUT PUTTING INTO OPERATION:

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-table length:2000 mm<br/>table width:600 mm<br/>table height:300 mm<br/>mounting surface:700 x 600 mm<br/>centre distance:1200 mm<br/>centre height:160 mm<br/>weight: t<br/>dimensions (wxdxh): m<br/>shaft straightening device: <br/><br/> TABLE LENGTH:2000 MM
TABLE WIDTH:600 MM
TABLE HEIGHT:300 MM
MOUNTING SURFACE:700 X 600 MM
CENTRE DISTANCE:1200 MM
CENTRE HEIGHT:160 MM
WEIGHT: T
DIMENSIONS (WXDXH): M
SHAFT STRAIGHTENING DEVICE:

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:100 t<br/>throat:360 mm<br/>stroke:500 mm<br/>distance table/ram, max. stroke up, adjustment up:800 mm<br/>table surface area:900 x 560 mm<br/>table height over floor:710 mm<br/>ram surface:630 x 400 mm<br/>speed down:200 mm/s<br/>speed up:200 mm/s<br/>working speed: mm/s<br/>power requirement:17,0 kw<br/>weight:5,0 t<br/>dimensions (wxdxh):1,2 x 1,9 x 3,3 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>two-hand operation: <br/>manual lever control: <br/><br/> PRESSURE:100 T
THROAT:360 MM
STROKE:500 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:800 MM
TABLE SURFACE AREA:900 X 560 MM
TABLE HEIGHT OVER FLOOR:710 MM
RAM SURFACE:630 X 400 MM
SPEED DOWN:200 MM/S
SPEED UP:200 MM/S
WORKING SPEED: MM/S
POWER REQUIREMENT:17,0 KW
WEIGHT:5,0 T
DIMENSIONS (WXDXH):1,2 X 1,9 X 3,3 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
TWO-HAND OPERATION:
MANUAL LEVER CONTROL:

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-<br>capacity: 250 t<br>stroke: 0 mm<br>distance column/center (throat): 360 mm<br>table length: 900 mm<br>table width: 630 mm <br>
CAPACITY: 250 T
STROKE: 0 MM
DISTANCE COLUMN/CENTER (THROAT): 360 MM
TABLE LENGTH: 900 MM
TABLE WIDTH: 630 MM
Vendedor: Voortman Machines
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ZEULENRODA types: