55 ofertas

Año de construcción: usado
Precio: used machinery auction RESALE 35.000 €
Ubicación: Land-tip height: approx. 650 mm, turning length: 6000 mm, m. four back lining, diameter: 630 mm, fabr. bison, get spindle diameter: approx. 150 mm, coolant system, engine light, digital display, battery-rite, hardened guideways, main drive: 30 kw, total speed range: 5-1000 rpm, continuous quick change tool holder, rear splash guard chip, central lubrication system for bed sleigh and facing slide, central lubrication system for headstock and feed, feeds metric and inch threads without changing the wheel, electr. adjustable tailstock, support for control and spindle TIP HEIGHT: APPROX. 650 MM, TURNING LENGTH: 6000 MM, M. FOUR BACK LINING, DIAMETER: 630 MM, FABR. BISON, GET SPINDLE DIAMETER: APPROX. 150 MM, COOLANT SYSTEM, ENGINE LIGHT, DIGITAL DISPLAY, BATTERY-RITE, HARDENED GUIDEWAYS, MAIN DRIVE: 30 KW, TOTAL SPEED RANGE: 5-1000 RPM, CONTINUOUS QUICK CHANGE TOOL HOLDER, REAR SPLASH GUARD CHIP, CENTRAL LUBRICATION SYSTEM FOR BED SLEIGH AND FACING SLIDE, CENTRAL LUBRICATION SYSTEM FOR HEADSTOCK AND FEED, FEEDS METRIC AND INCH THREADS WITHOUT CHANGING THE WHEEL, ELECTR. ADJUSTABLE TAILSTOCK, SUPPORT FOR CONTROL AND SPINDLE
Vendedor: Indutax GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 1320 mm<br/>turning diameter over slide rest: 940 mm<br/>turning length: 4000 mm<br/>centre height: 625 mm<br/>turning dia. in gap: 1500 mm<br/>bed width: 700 mm<br/>spindle bore: 155 mm<br/>spindle taper:: din 55027 gr. 15 <br/>spindle turning speed range: 24 / 5 - 1000 rpm.<br/>spindle motor: 30 kw<br/>weight of the machine ca.: 8,55 t<br/>machinelight:  <br/>electric for  three-phase 400 volt:  <br/>carriage-rapid traverse:  <br/>digital readout in 3 axis: acu-rite <br/>face plate: 900 mm<br/>face plate: 1200 mm<br/>following steady: ca. 300 mm<br/>fixed steady with rolls: ca. 300 mm<br/>fixed steady with roll: ca. 500 mm<br/>fixed steady with roll: ca. 720 mm<br/>4 station steel holder:  <br/>power traverse in the top carriage:  <br/>chip protect bonnet:  <br/>chip protection behind:  <br/>diverse tools:  <br/>tailstock unit motorized adjustable:  <br/>tool cupboard:  <br/>chip pan: 2 stück<br/>machine with big spindelbore = 155 mm. it stands at present still at customers factory and will be cleaned after receipt in our stock.<br/><br/><br/><br/> TURNING DIAMETER OVER BED: 1320 MM
TURNING DIAMETER OVER SLIDE REST: 940 MM
TURNING LENGTH: 4000 MM
CENTRE HEIGHT: 625 MM
TURNING DIA. IN GAP: 1500 MM
BED WIDTH: 700 MM
SPINDLE BORE: 155 MM
SPINDLE TAPER:: DIN 55027 GR. 15
SPINDLE TURNING SPEED RANGE: 24 / 5 - 1000 RPM.
SPINDLE MOTOR: 30 KW
WEIGHT OF THE MACHINE CA.: 8,55 T
MACHINELIGHT:
ELECTRIC FOR THREE-PHASE 400 VOLT:
CARRIAGE-RAPID TRAVERSE:
DIGITAL READOUT IN 3 AXIS: ACU-RITE
FACE PLATE: 900 MM
FACE PLATE: 1200 MM
FOLLOWING STEADY: CA. 300 MM
FIXED STEADY WITH ROLLS: CA. 300 MM
FIXED STEADY WITH ROLL: CA. 500 MM
FIXED STEADY WITH ROLL: CA. 720 MM
4 STATION STEEL HOLDER:
POWER TRAVERSE IN THE TOP CARRIAGE:
CHIP PROTECT BONNET:
CHIP PROTECTION BEHIND:
DIVERSE TOOLS:
TAILSTOCK UNIT MOTORIZED ADJUSTABLE:
TOOL CUPBOARD:
CHIP PAN: 2 STüCK
MACHINE WITH BIG SPINDELBORE = 155 MM. IT STANDS AT PRESENT STILL AT CUSTOMERS FACTORY AND WILL BE CLEANED AFTER RECEIPT IN OUR STOCK.



Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-turning length: approx. 2000 mm, tip height: approx. 300 mm to 1250 rpm, get spindle diameter: approx. 60 mm, light, three-jaw chuck, coolant system, diameter: 300 mm, 3-axis digital display, bezel TURNING LENGTH: APPROX. 2000 MM, TIP HEIGHT: APPROX. 300 MM TO 1250 RPM, GET SPINDLE DIAMETER: APPROX. 60 MM, LIGHT, THREE-JAW CHUCK, COOLANT SYSTEM, DIAMETER: 300 MM, 3-AXIS DIGITAL DISPLAY, BEZEL
Vendedor: Indutax GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 1900 x 900 x 1600 mm<br/>description: turning diameter over bed: 310mm turning diameter over slide rest: 190mm turning length: 750mm speeds: 65- 2200u/min centre height: 155mm spindle bore: 38mm tailstock quill taper mt: 4 total power requirement: 2,2kw - stepless speed - 3-jaw chuck 160mm - quick change steel holder - coolant device - splash guard wall and feed protection - machine lamp - documentation about the machine WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 1900 X 900 X 1600 MM
DESCRIPTION: TURNING DIAMETER OVER BED: 310MM TURNING DIAMETER OVER SLIDE REST: 190MM TURNING LENGTH: 750MM SPEEDS: 65- 2200U/MIN CENTRE HEIGHT: 155MM SPINDLE BORE: 38MM TAILSTOCK QUILL TAPER MT: 4 TOTAL POWER REQUIREMENT: 2,2KW - STEPLESS SPEED - 3-JAW CHUCK 160MM - QUICK CHANGE STEEL HOLDER - COOLANT DEVICE - SPLASH GUARD WALL AND FEED PROTECTION - MACHINE LAMP - DOCUMENTATION ABOUT THE MACHINE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 12.000 €
Ubicación: Land-up 1015 rpm., get spindle diameter: approx. 100 mm, turning length: 3000 mm, tip height: approx. 400 mm, m. 3-axis digital display, coolant system, machine light, multi fix steel holder UP 1015 RPM., GET SPINDLE DIAMETER: APPROX. 100 MM, TURNING LENGTH: 3000 MM, TIP HEIGHT: APPROX. 400 MM, M. 3-AXIS DIGITAL DISPLAY, COOLANT SYSTEM, MACHINE LIGHT, MULTI FIX STEEL HOLDER
Vendedor: Indutax GmbH
Año de construcción: usado
Precio: 58.140 €
Ubicación: Land-: 380 mm<br/>: 760 mm<br/>: 520 mm<br/>: 950 mm<br/>: 560 mm<br/>: 3.000 mm<br/>: . 11 nr<br/>: 132 mm<br/>: 140 m<br/>: 15 kw<br/>: 410 mm<br/>: 150 mm<br/>: 105 mm<br/>: 6 mk<br/>: 225 mm<br/>: 4.470 kg<br/>driven by variable speed control (3 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra type multifix with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3295/din6350, Ø 400 mm<br/>spindle dead center<br/>main motor with frequency invertor<br/>four way rapid traverse device<br/>foot pedal brake<br/>longitudinal stop for 1 position<br/>steady and following rest<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>tailstock quill reducer<br/>mechanized movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo) <br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm ? 47.810,-   turning length 2.000 mm ? 49.990,-   turning length 4.000 mm ? 64.430,-   turning length 5.000 mm ? 73.460,-   turning length 6.000 mm ? 83.340,-   <br/><br/>centre height: 380 mm<br/>swing over bed: 760 mm<br/>swing over cross slide: 520 mm<br/>swing in gap: 950 mm<br/>width of bed: 560 mm<br/>distance between centers: 3.000 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 132 mm<br/>spindle taper: m 140<br/>drehzahlen (variabel mit 3 stufen): 7 - 42, 28 - 170, 165 - 1.015 rpm<br/>main motor power: 15 kw<br/>number of feeds: 150<br/>longitudinal feed range: 0,039 - 18 mm/r<br/>cross feed range: 0,02 - 9 mm/r<br/>number of threads: 	<br/>metric thread range (76): 0,5 - 180 mm<br/>inch thread rangel (76): 60 - 1/6 tpi<br/>module thread range (76): 0,125 - 45<br/>dp thread range (76): 240 - 2/3<br/>cross slide travel: 410 mm<br/>top slide travel: 150 mm<br/>tailstock quill diameter: 105 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 225 mm<br/>weight approx.: 4.470 kg<br/><br/><br/><br/> : 380 MM
: 760 MM
: 520 MM
: 950 MM
: 560 MM
: 3.000 MM
: . 11 NR
: 132 MM
: 140 M
: 15 KW
: 410 MM
: 150 MM
: 105 MM
: 6 MK
: 225 MM
: 4.470 KG
DRIVEN BY VARIABLE SPEED CONTROL (3 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3295/DIN6350, Ø 400 MM
SPINDLE DEAD CENTER
MAIN MOTOR WITH FREQUENCY INVERTOR
FOUR WAY RAPID TRAVERSE DEVICE
FOOT PEDAL BRAKE
LONGITUDINAL STOP FOR 1 POSITION
STEADY AND FOLLOWING REST
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
TAILSTOCK QUILL REDUCER
MECHANIZED MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM ? 47.810,- TURNING LENGTH 2.000 MM ? 49.990,- TURNING LENGTH 4.000 MM ? 64.430,- TURNING LENGTH 5.000 MM ? 73.460,- TURNING LENGTH 6.000 MM ? 83.340,-

CENTRE HEIGHT: 380 MM
SWING OVER BED: 760 MM
SWING OVER CROSS SLIDE: 520 MM
SWING IN GAP: 950 MM
WIDTH OF BED: 560 MM
DISTANCE BETWEEN CENTERS: 3.000 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 132 MM
SPINDLE TAPER: M 140
DREHZAHLEN (VARIABEL MIT 3 STUFEN): 7 - 42, 28 - 170, 165 - 1.015 RPM
MAIN MOTOR POWER: 15 KW
NUMBER OF FEEDS: 150
LONGITUDINAL FEED RANGE: 0,039 - 18 MM/R
CROSS FEED RANGE: 0,02 - 9 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (76): 0,5 - 180 MM
INCH THREAD RANGEL (76): 60 - 1/6 TPI
MODULE THREAD RANGE (76): 0,125 - 45
DP THREAD RANGE (76): 240 - 2/3
CROSS SLIDE TRAVEL: 410 MM
TOP SLIDE TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 105 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 225 MM
WEIGHT APPROX.: 4.470 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 3.277 €
Ubicación: Land-technical data:

brand: zmm

type: c8c

turning diameter above bed: 330 mm

turning diameter above support: 180 mm

turning length: 750 mm

spindle bore: 33 mm

spindle speeds: 85-2000 rpm

total power: 2,2 kw

operating voltage 380 v

machine weight: 800 kg

TECHNICAL DATA: BRAND: ZMM TYPE: C8C TURNING DIAMETER ABOVE BED: 330 MM TURNING DIAMETER ABOVE SUPPORT: 180 MM TURNING LENGTH: 750 MM SPINDLE BORE: 33 MM SPINDLE SPEEDS: 85-2000 RPM TOTAL POWER: 2,2 KW OPERATING VOLTAGE 380 V MACHINE WEIGHT: 800 KG
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: 37.910 €
Ubicación: Land-: 300 mm<br/>: 600 mm<br/>: 400 mm<br/>: 800 mm<br/>: 400 mm<br/>: 2.000 mm<br/>: . 8 nr<br/>: 80 mm<br/>: 90 m<br/>: 15 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 3.600 mm<br/>: 1.500 mm<br/>: 1.650 mm<br/>: 3.100 kg<br/>driven by variable speed control (3 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra type multifix with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 250 mm<br/>spindle dead center<br/>main motor with frequency invertor<br/>four way rapid traverse device<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.000 mm ? 35.700,-   turning length 1.500 mm ? 36.530,-   turning length 3.000 mm ? 41.620,-   turning length 4.000 mm ? 45.800,-   turning length 5.000 mm ? 56.440,-   <br/><br/><br/><br/><br/>center height: 300 mm<br/>swing over bed: 600 mm<br/>swing over cross slide: 400 mm<br/>swing in gap: 800 mm<br/>width of bed: 400 mm<br/>distance between centers: 2.000 mm<br/>spindle nose / din55027: no. 8 <br/>spindle bore: 80 mm<br/>spindle taper: mt90<br/>spindle speeds (infinitely variable in 3 subranges): 8-62, 62-500, 250-2.000 rpm<br/>main motor power: 15 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,02 - 12 mm/u<br/>cross feed range: 0,01 - 6 mm/u<br/>number of threads: 80<br/>metric thread range: 0,25 - 120 mm<br/>inch thread rangel: 120 - 1/4 tpi<br/>module thread range: 0,0625 - 30<br/>dp thread range: 480 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>length: 3.600 mm<br/>width: 1.500 mm<br/>height: 1.650 mm<br/>weight: 3.100 kg<br/><br/><br/><br/> : 300 MM
: 600 MM
: 400 MM
: 800 MM
: 400 MM
: 2.000 MM
: . 8 NR
: 80 MM
: 90 M
: 15 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 3.600 MM
: 1.500 MM
: 1.650 MM
: 3.100 KG
DRIVEN BY VARIABLE SPEED CONTROL (3 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 250 MM
SPINDLE DEAD CENTER
MAIN MOTOR WITH FREQUENCY INVERTOR
FOUR WAY RAPID TRAVERSE DEVICE
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.000 MM ? 35.700,- TURNING LENGTH 1.500 MM ? 36.530,- TURNING LENGTH 3.000 MM ? 41.620,- TURNING LENGTH 4.000 MM ? 45.800,- TURNING LENGTH 5.000 MM ? 56.440,-




CENTER HEIGHT: 300 MM
SWING OVER BED: 600 MM
SWING OVER CROSS SLIDE: 400 MM
SWING IN GAP: 800 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 2.000 MM
SPINDLE NOSE / DIN55027: NO. 8
SPINDLE BORE: 80 MM
SPINDLE TAPER: MT90
SPINDLE SPEEDS (INFINITELY VARIABLE IN 3 SUBRANGES): 8-62, 62-500, 250-2.000 RPM
MAIN MOTOR POWER: 15 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,02 - 12 MM/U
CROSS FEED RANGE: 0,01 - 6 MM/U
NUMBER OF THREADS: 80
METRIC THREAD RANGE: 0,25 - 120 MM
INCH THREAD RANGEL: 120 - 1/4 TPI
MODULE THREAD RANGE: 0,0625 - 30
DP THREAD RANGE: 480 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
LENGTH: 3.600 MM
WIDTH: 1.500 MM
HEIGHT: 1.650 MM
WEIGHT: 3.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
	
	-drilling capacity in steel st 60 30 mm
	-spindle mount mt 3
	-4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm / rev
	-spindle speed in steps adjustable 95-2000 rpm
	-drilling spindle stroke 160 mm
	-throat depth 350 mm
	-table with 3 t-slots height 340 x 320 mm
	-table is left + right tilt
	-max.  distance from table - spindle 500 mm
	-max.  distance worked base plate - spindle mm 1050
	-column diameter 160 mm
	-lighting
	-machine vise
	-keyless drill chuck 13 mm
	-div 20 st. hss drill bit 8 to 20 mm
	-drive 400 v / 2.4 kw - space requirement approx.	              b h 600 x 1950 x 800 mm
	-weight approx.					  	  350 kg
 TECHNICAL DATA: -DRILLING CAPACITY IN STEEL ST 60 30 MM -SPINDLE MOUNT MT 3 -4 FEEDS 0.1 - 0.16 - 0.25 - 0.4 MM / REV -SPINDLE SPEED IN STEPS ADJUSTABLE 95-2000 RPM -DRILLING SPINDLE STROKE 160 MM -THROAT DEPTH 350 MM -TABLE WITH 3 T-SLOTS HEIGHT 340 X 320 MM -TABLE IS LEFT + RIGHT TILT -MAX. DISTANCE FROM TABLE - SPINDLE 500 MM -MAX. DISTANCE WORKED BASE PLATE - SPINDLE MM 1050 -COLUMN DIAMETER 160 MM -LIGHTING -MACHINE VISE -KEYLESS DRILL CHUCK 13 MM -DIV 20 ST. HSS DRILL BIT 8 TO 20 MM -DRIVE 400 V / 2.4 KW - SPACE REQUIREMENT APPROX. B H 600 X 1950 X 800 MM -WEIGHT APPROX. 350 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 37.260 €
Ubicación: Land-: 315 mm<br/>: 630 mm<br/>: 430 mm<br/>: 830 mm<br/>: 400 mm<br/>: 2.000 mm<br/>: . 11 nr<br/>: 103 mm<br/>: 120 m<br/>: 11 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 3.310 kg<br/>driven by manual transmission<br/>3-axes digital readout<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 315 mm<br/>spindle dead center<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.000 mm ? 35.120,-   turning length 1.500 mm ? 35.900,-   turning length 3.000 mm ? 40.840,-   turning length 4.000 mm ? 44.880,-   turning length 5.000 mm ? 55.380,-   <br/><br/> <br/><br/>entre height: 315 mm<br/>swing over bed: 630 mm<br/>swing over cross slide: 430 mm<br/>swing in gap: 830 mm<br/>width of bed: 400 mm<br/>distance between centers: 2.000 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 103 mm<br/>spindle taper: m 120<br/>spindle speeds (17): 12,5 - 1.250 rpm<br/>main motor power: 11 kw<br/>number of feeds: 120<br/>longitudinal feed range: 0,04 - 12 mm/r<br/>cross feed range: 0,02 - 6 mm/r<br/>number of threads: 	<br/>metric thread range (64): 0,5 - 120 mm<br/>inch thread rangel (64): 60 - 1/4 tpi<br/>module thread range (64): 0,125 - 30<br/>dp thread range (64): 240 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 3.310 kg<br/><br/><br/><br/> : 315 MM
: 630 MM
: 430 MM
: 830 MM
: 400 MM
: 2.000 MM
: . 11 NR
: 103 MM
: 120 M
: 11 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 3.310 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 315 MM
SPINDLE DEAD CENTER
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.000 MM ? 35.120,- TURNING LENGTH 1.500 MM ? 35.900,- TURNING LENGTH 3.000 MM ? 40.840,- TURNING LENGTH 4.000 MM ? 44.880,- TURNING LENGTH 5.000 MM ? 55.380,-



ENTRE HEIGHT: 315 MM
SWING OVER BED: 630 MM
SWING OVER CROSS SLIDE: 430 MM
SWING IN GAP: 830 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 2.000 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 103 MM
SPINDLE TAPER: M 120
SPINDLE SPEEDS (17): 12,5 - 1.250 RPM
MAIN MOTOR POWER: 11 KW
NUMBER OF FEEDS: 120
LONGITUDINAL FEED RANGE: 0,04 - 12 MM/R
CROSS FEED RANGE: 0,02 - 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (64): 0,5 - 120 MM
INCH THREAD RANGEL (64): 60 - 1/4 TPI
MODULE THREAD RANGE (64): 0,125 - 30
DP THREAD RANGE (64): 240 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 3.310 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-make: zmm
model: rover 20
year: 2001
condition: used
machine type: mill 
location of machine: united kingdom 
service details: part history 
documentation / manuals included? yes

machine details
machine in good working order other than slight issue on the tool changer. 

contact us now! MAKE: ZMM MODEL: ROVER 20 YEAR: 2001 CONDITION: USED MACHINE TYPE: MILL LOCATION OF MACHINE: UNITED KINGDOM SERVICE DETAILS: PART HISTORY DOCUMENTATION / MANUALS INCLUDED? YES MACHINE DETAILS MACHINE IN GOOD WORKING ORDER OTHER THAN SLIGHT ISSUE ON THE TOOL CHANGER. CONTACT US NOW!
Vendedor: CNC Management Ltd
Año de construcción: usado
Precio: 30.380 €
Ubicación: Land-: 250 mm<br/>: 500 mm<br/>: 300 mm<br/>: 700 mm<br/>: 400 mm<br/>: 1.500 mm<br/>: . 8 nr<br/>: 72 mm<br/>: 80 m<br/>: 7,5/11 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 2.950 kg<br/>driven by manual transmission<br/>3-axes digital readout<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 250 mm<br/>spindle dead center<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo) <br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.000 mm ? 29.600,-   turning length 2.000 mm ? 31.740,-   turning length 3.000 mm ? 35.220,-   turning length 4.000 mm ? 39.360,-   turning length 5.000 mm ? 49.760,-   <br/><br/><br/><br/>centre height: 250 mm<br/>swing over bed: 500 mm<br/>swing over cross slide: 300 mm<br/>swing in gap: 700 mm<br/>width of bed: 400 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 8<br/>spindlebore: 72 mm<br/>spindle taper: mt 80<br/>spindle speeds (21): 20 - 2.000 rpm<br/>main motor power: 7,5/11 kw<br/>number of feeds: 120<br/>longitudinal feed range: 0,04 - 12 mm/r<br/>cross feed range: 0,02 - 6 mm/r<br/>number of threads: 	<br/>metric thread range (64): 0,5 - 120 mm<br/>inch thread rangel (64): 60 - 1/4 tpi<br/>module thread range (64): 0,125 - 30<br/>dp thread range (64): 240 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 2.950 kg<br/><br/><br/><br/> : 250 MM
: 500 MM
: 300 MM
: 700 MM
: 400 MM
: 1.500 MM
: . 8 NR
: 72 MM
: 80 M
: 7,5/11 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 2.950 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 250 MM
SPINDLE DEAD CENTER
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.000 MM ? 29.600,- TURNING LENGTH 2.000 MM ? 31.740,- TURNING LENGTH 3.000 MM ? 35.220,- TURNING LENGTH 4.000 MM ? 39.360,- TURNING LENGTH 5.000 MM ? 49.760,-



CENTRE HEIGHT: 250 MM
SWING OVER BED: 500 MM
SWING OVER CROSS SLIDE: 300 MM
SWING IN GAP: 700 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 8
SPINDLEBORE: 72 MM
SPINDLE TAPER: MT 80
SPINDLE SPEEDS (21): 20 - 2.000 RPM
MAIN MOTOR POWER: 7,5/11 KW
NUMBER OF FEEDS: 120
LONGITUDINAL FEED RANGE: 0,04 - 12 MM/R
CROSS FEED RANGE: 0,02 - 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (64): 0,5 - 120 MM
INCH THREAD RANGEL (64): 60 - 1/4 TPI
MODULE THREAD RANGE (64): 0,125 - 30
DP THREAD RANGE (64): 240 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 2.950 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-mechanical lathe zmm cu325brand 
name: zmm
type: cu325.
distance between centers: 1000 mm
diameter of rotation above: Ø 325 mm
diameter of rotation above the car: Ø 190 mm
diameter of the chuck: Ø 160 mm
tree hole passage: 32 mm
speeds: 24 (42.5 - 2000 rpm)
mains voltage: 400vengine: 2.2 kw
quick turret
quick bushing
rotary point

zmm lathe used in good working condition.    

video: youtube.com/watch?v=k01ynip0swe&feature=youtu.be  MECHANICAL LATHE ZMM CU325BRAND NAME: ZMM TYPE: CU325. DISTANCE BETWEEN CENTERS: 1000 MM DIAMETER OF ROTATION ABOVE: Ø 325 MM DIAMETER OF ROTATION ABOVE THE CAR: Ø 190 MM DIAMETER OF THE CHUCK: Ø 160 MM TREE HOLE PASSAGE: 32 MM SPEEDS: 24 (42.5 - 2000 RPM) MAINS VOLTAGE: 400VENGINE: 2.2 KW QUICK TURRET QUICK BUSHING ROTARY POINT ZMM LATHE USED IN GOOD WORKING CONDITION. VIDEO: YOUTUBE.COM/WATCH?V=K01YNIP0SWE&FEATURE=YOUTU.BE
Vendedor: occasionmachines
Año de construcción: usado
Precio: 91.970 €
Ubicación: Land-: 500 mm<br/>: 1.090 mm<br/>: 690 mm<br/>: 1.250 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 22/30 kw<br/>: 525 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 8.050 kg<br/>driven by manual transmission<br/>3-axes digital readout<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/><br/>further turning lengths<br/><br/><br/>   turning length 1.500 mm  ? 70.800,-   turning length 3.000 mm  ? 76.490,-   turning length 4.000 mm  ? 86.940,-   turning length 6.000 mm  ? 109.230,-   <br/><br/><br/><br/>entre height: 500 mm<br/>swing over bed: 1.090 mm<br/>swing over cross slide: 690 mm<br/>swing in gap: 1.250 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (24): 6,3 - 1.250 rpm<br/>main motor power: 22/30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 - 38,9 mm/r<br/>cross feed range: 0,016 - 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 260 mm<br/>weight approx.: 8.050 kg<br/><br/><br/><br/> : 500 MM
: 1.090 MM
: 690 MM
: 1.250 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 22/30 KW
: 525 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 8.050 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)

FURTHER TURNING LENGTHS


TURNING LENGTH 1.500 MM  ? 70.800,- TURNING LENGTH 3.000 MM  ? 76.490,- TURNING LENGTH 4.000 MM  ? 86.940,- TURNING LENGTH 6.000 MM  ? 109.230,-



ENTRE HEIGHT: 500 MM
SWING OVER BED: 1.090 MM
SWING OVER CROSS SLIDE: 690 MM
SWING IN GAP: 1.250 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (24): 6,3 - 1.250 RPM
MAIN MOTOR POWER: 22/30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 - 38,9 MM/R
CROSS FEED RANGE: 0,016 - 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 8.050 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-center lathe, centre distance 3 m = 3000 mm<br/>  drehspindel-quill bore 62 mm<br/>  turning diameter over bed approximately 480 mm turning diameter over support approx. 280 mm mutlifix quick clamping head CENTER LATHE, CENTRE DISTANCE 3 M = 3000 MM
DREHSPINDEL-QUILL BORE 62 MM
TURNING DIAMETER OVER BED APPROXIMATELY 480 MM TURNING DIAMETER OVER SUPPORT APPROX. 280 MM MUTLIFIX QUICK CLAMPING HEAD
Vendedor: Schweizer Service
Año de construcción: usado
Precio: 14.880 €
Ubicación: Land-: 165 mm<br/>: 400 mm<br/>: 190 mm<br/>: 440 mm<br/>: 200 mm<br/>: 750 mm<br/>: . 5 nr<br/>: 32 mm<br/>: 4,5 mk<br/>: 2,2 kw<br/>: 150 mm<br/>: 95 mm<br/>: 40 mm<br/>: 3 mk<br/>: 100 mm<br/>: 770 kg<br/>driven by manual transmission<br/>3-axes digital readout<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 160 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.000 mm ? 15.570,-   <br/><br/>center height: 165 mm<br/>swing over bed: 400 mm<br/>swing over cross slide: 190 mm<br/>swing in gap: 440 mm<br/>width of bed: 200 mm<br/>distance between centers: 750 mm<br/>spindle nose / din55027: no. 5<br/>spindle bore: 32 mm<br/>spindle taper: mt 4,5<br/>spindle speeds (12): 85 - 2.000 rpm<br/>main motor power: 2,2 kw<br/>number of feeds: 48<br/>longitudinal feed range: 0,006 - 1,77 mm/r<br/>cross feed range: 0,003 - 0,885 mm/r<br/>number of threads:<br/>metric thread range (48): 0,1 - 285 mm<br/>inch thread rangel (53): 75 - 2,5 tpi<br/>module thread range (19): 0,1 - 1,75<br/>dp thread range (19): 70 - 4<br/>cross slide travel: 150 mm<br/>top slide travel: 95 mm<br/>tailstock quill diameter: 40 mm<br/>tailstock quill taper: mk 3<br/>tailstock travel: 100 mm<br/>weight approx.: 770 kg<br/><br/><br/><br/> : 165 MM
: 400 MM
: 190 MM
: 440 MM
: 200 MM
: 750 MM
: . 5 NR
: 32 MM
: 4,5 MK
: 2,2 KW
: 150 MM
: 95 MM
: 40 MM
: 3 MK
: 100 MM
: 770 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 160 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.000 MM ? 15.570,-

CENTER HEIGHT: 165 MM
SWING OVER BED: 400 MM
SWING OVER CROSS SLIDE: 190 MM
SWING IN GAP: 440 MM
WIDTH OF BED: 200 MM
DISTANCE BETWEEN CENTERS: 750 MM
SPINDLE NOSE / DIN55027: NO. 5
SPINDLE BORE: 32 MM
SPINDLE TAPER: MT 4,5
SPINDLE SPEEDS (12): 85 - 2.000 RPM
MAIN MOTOR POWER: 2,2 KW
NUMBER OF FEEDS: 48
LONGITUDINAL FEED RANGE: 0,006 - 1,77 MM/R
CROSS FEED RANGE: 0,003 - 0,885 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (48): 0,1 - 285 MM
INCH THREAD RANGEL (53): 75 - 2,5 TPI
MODULE THREAD RANGE (19): 0,1 - 1,75
DP THREAD RANGE (19): 70 - 4
CROSS SLIDE TRAVEL: 150 MM
TOP SLIDE TRAVEL: 95 MM
TAILSTOCK QUILL DIAMETER: 40 MM
TAILSTOCK QUILL TAPER: MK 3
TAILSTOCK TRAVEL: 100 MM
WEIGHT APPROX.: 770 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 57.500 €
Ubicación: Land-used horizontal machining center

heckert cwk 500 d

xmm750

ymm650 (750)

zmm700

spindle speed 50-10000 (15000)

siemens control sinumerik 840 d

tool magazine 60 positions

pallet changer

2000 ce

connected load, visible at work, complete with manuals and ce documentation

welcome

thank you for your inquiry.
in invite you to visit the machine offers on our website.
if you have any further questions, i am at your disposal.

warning; from 01.05.2018 we are only on the platform abc.resale.info, machineseeker raised prices by 1200%!?!

abc.arte-ferrum.eu/en/dmg-deckel-maho-dmc-635-v-vertical-milling-center-detail
proposal level 57.000 euros

abc.arte-ferrum.eu/en/deckel-maho-dmu-60-t-vertical-center-detail
proposal level 56.000 euro

abc.arte-ferrum.eu/en/deckel-maho-dmc-63v-vertical-machining-center-detail
proposal level euro 23.900

abc.arte-ferrum.eu/en/doosan-daewoo-puma-240-mb-lathe-cnc-detail
proposal level 45.900 euro

abc.arte-ferrum.eu/en/daewoo-doosan-puma-2000-sy-lathe-6axis-loader-detail
proposal level 57.500 euro

abc.arte-ferrum.eu/en/quaser-hx-504-bp-12-cnc-horizontal-machining-center-detail
proposal level 137.000 €

abc.arte-ferrum.eu/en/quaser-hx504b-cnc-horizontal-machining-center-detail
proposal level 98.000 euro

abc.arte-ferrum.eu/en/doosan-mynx-6500-50-vertical-machine-machining-center-detail
proposal level 78.000 euro

abc.arte-ferrum.eu/en/daewoo-puma-350-a-lathe-cnc-detail
proposal level 43.900 eur

abc.arte-ferrum.eu/en/gildemeister-ctx-210-cnc-lathe-bar-loader-iemca-boss-545-e-detail
proposal level 44.000 euros

abc.arte-ferrum.eu/en/mikron-vcp-710-vertical-machining-center-detail
proposal level 77,000 euro

abc.arte-ferrum.eu/en/mikron-710-ucp-vcp-5-axis-vertical-machining-center-detail
proposal of the level of 80,000 euro

abc.arte-ferrum.eu/en/hanwha-sl-32he-cnc-lathe-multi-detail
proposal level 56.000 euro

abc.arte-ferrum.eu/en/hurco-vmx-24-4axis-vertical-center-detail
proposal level 32.000 euro

abc.arte-ferrum.eu/en/hurco-bmc-6434-vertical-machining-center-detail
proposal level 54.500 euro

abc.arte-ferrum.eu/en/mazak-fh-4800-horizontal-machining-center-detail
proposal level 74.000 eur

abc.arte-ferrum.eu/en/mazak-dual-turn-20-cnc-lathe-two-head-detail
proposal level 36.900 eur

abc.arte-ferrum.eu/en/mazak-vtc-20-b-vertical-machining-center-detail
proposal level 22.700 euro

abc.arte-ferrum.eu/en/mazak-vtc-300-c-ii-vertical-machining-center-detail
proposal level 67.000 euro

abc://abc.arte-ferrum.eu/en/mazak-sqt-250m-lathe-axis-c-1998-detail
proposal level 47.500 euro

abc.arte-ferrum.eu/en/mikron-haas-vce-500-4-axes-vertical-machining-center-detail
proposal level 26.000 euro

abc.arte-ferrum.eu/en/sodick-aq327l-premium-precision-wire-edm-cnc-detail
proposal level 32.500 euro

abc.arte-ferrum.eu/en/hardinge-vmc-1000-ii-cnc-vertical-machining-center-detail
proposal level 24.900 euro

abc.arte-ferrum.eu/en/mori-seiki-nl2500sy-700-cnc-lathe-2004-detail
proposal level 92.000 euro

abc.arte-ferrum.eu/en/goodway-ga-3000-l-cnc-lathe-detail
proposal level 45.500 euro

abc.arte-ferrum.eu/en/okuma-lb-15-ii-equipped-with-easily-removable-sanding-unit-detail
proposal level 21.700 euro

abc.arte-ferrum.eu/en/okuma-lb-15-ii-m-cnc-lathe-12-motorized-tools-detail
proposal level 24.900 euro

abc://abc.arte-ferrum.eu/en/heckert-cwk-500d-horizontal-machining-center-detail
proposal level 53.500 €

abc.arte-ferrum.eu/en/dmg-sauer-ultrasonic-10-5-axis-high-speed-vertical-machining-center-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/dmg-gildemeister-sprint-20-8-linear-cnc-sliding-head-stock-lathe-swiss-type-with-8-controlled-axis-and-bar-feeder-2011-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/haas-vf-7-40-cnc-vertical-machining-centre-high-speed-2015-3-axis-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/trumpf-trulaser-5040-truflow-7kw-laser-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/mazak-quick-turn-250ma-500-smoothg-used-lathe-made-in-japan-2017-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

negotiable prices, including disassembly and loading, except sold, central europe

best regards/sincerely/cordiali saluti/meilleures salutations
the myth of friendly grüßen/saludos cordiales.a atte.saludos honorable/c c ?????????/?????

arte ferrum    USED HORIZONTAL MACHINING CENTER HECKERT CWK 500 D XMM750 YMM650 (750) ZMM700 SPINDLE SPEED 50-10000 (15000) SIEMENS CONTROL SINUMERIK 840 D TOOL MAGAZINE 60 POSITIONS PALLET CHANGER 2000 CE CONNECTED LOAD, VISIBLE AT WORK, COMPLETE WITH MANUALS AND CE DOCUMENTATION WELCOME THANK YOU FOR YOUR INQUIRY. IN INVITE YOU TO VISIT THE MACHINE OFFERS ON OUR WEBSITE. IF YOU HAVE ANY FURTHER QUESTIONS, I AM AT YOUR DISPOSAL. WARNING; FROM 01.05.2018 WE ARE ONLY ON THE PLATFORM ABC.RESALE.INFO, MACHINESEEKER RAISED PRICES BY 1200%!?! ABC.ARTE-FERRUM.EU/EN/DMG-DECKEL-MAHO-DMC-635-V-VERTICAL-MILLING-CENTER-DETAIL PROPOSAL LEVEL 57.000 EUROS ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMU-60-T-VERTICAL-CENTER-DETAIL PROPOSAL LEVEL 56.000 EURO ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMC-63V-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL EURO 23.900 ABC.ARTE-FERRUM.EU/EN/DOOSAN-DAEWOO-PUMA-240-MB-LATHE-CNC-DETAIL PROPOSAL LEVEL 45.900 EURO ABC.ARTE-FERRUM.EU/EN/DAEWOO-DOOSAN-PUMA-2000-SY-LATHE-6AXIS-LOADER-DETAIL PROPOSAL LEVEL 57.500 EURO ABC.ARTE-FERRUM.EU/EN/QUASER-HX-504-BP-12-CNC-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 137.000 € ABC.ARTE-FERRUM.EU/EN/QUASER-HX504B-CNC-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 98.000 EURO ABC.ARTE-FERRUM.EU/EN/DOOSAN-MYNX-6500-50-VERTICAL-MACHINE-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 78.000 EURO ABC.ARTE-FERRUM.EU/EN/DAEWOO-PUMA-350-A-LATHE-CNC-DETAIL PROPOSAL LEVEL 43.900 EUR ABC.ARTE-FERRUM.EU/EN/GILDEMEISTER-CTX-210-CNC-LATHE-BAR-LOADER-IEMCA-BOSS-545-E-DETAIL PROPOSAL LEVEL 44.000 EUROS ABC.ARTE-FERRUM.EU/EN/MIKRON-VCP-710-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 77,000 EURO ABC.ARTE-FERRUM.EU/EN/MIKRON-710-UCP-VCP-5-AXIS-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL OF THE LEVEL OF 80,000 EURO ABC.ARTE-FERRUM.EU/EN/HANWHA-SL-32HE-CNC-LATHE-MULTI-DETAIL PROPOSAL LEVEL 56.000 EURO ABC.ARTE-FERRUM.EU/EN/HURCO-VMX-24-4AXIS-VERTICAL-CENTER-DETAIL PROPOSAL LEVEL 32.000 EURO ABC.ARTE-FERRUM.EU/EN/HURCO-BMC-6434-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 54.500 EURO ABC.ARTE-FERRUM.EU/EN/MAZAK-FH-4800-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 74.000 EUR ABC.ARTE-FERRUM.EU/EN/MAZAK-DUAL-TURN-20-CNC-LATHE-TWO-HEAD-DETAIL PROPOSAL LEVEL 36.900 EUR ABC.ARTE-FERRUM.EU/EN/MAZAK-VTC-20-B-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 22.700 EURO ABC.ARTE-FERRUM.EU/EN/MAZAK-VTC-300-C-II-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 67.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/MAZAK-SQT-250M-LATHE-AXIS-C-1998-DETAIL PROPOSAL LEVEL 47.500 EURO ABC.ARTE-FERRUM.EU/EN/MIKRON-HAAS-VCE-500-4-AXES-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 26.000 EURO ABC.ARTE-FERRUM.EU/EN/SODICK-AQ327L-PREMIUM-PRECISION-WIRE-EDM-CNC-DETAIL PROPOSAL LEVEL 32.500 EURO ABC.ARTE-FERRUM.EU/EN/HARDINGE-VMC-1000-II-CNC-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 24.900 EURO ABC.ARTE-FERRUM.EU/EN/MORI-SEIKI-NL2500SY-700-CNC-LATHE-2004-DETAIL PROPOSAL LEVEL 92.000 EURO ABC.ARTE-FERRUM.EU/EN/GOODWAY-GA-3000-L-CNC-LATHE-DETAIL PROPOSAL LEVEL 45.500 EURO ABC.ARTE-FERRUM.EU/EN/OKUMA-LB-15-II-EQUIPPED-WITH-EASILY-REMOVABLE-SANDING-UNIT-DETAIL PROPOSAL LEVEL 21.700 EURO ABC.ARTE-FERRUM.EU/EN/OKUMA-LB-15-II-M-CNC-LATHE-12-MOTORIZED-TOOLS-DETAIL PROPOSAL LEVEL 24.900 EURO ABC://ABC.ARTE-FERRUM.EU/EN/HECKERT-CWK-500D-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 53.500 € ABC.ARTE-FERRUM.EU/EN/DMG-SAUER-ULTRASONIC-10-5-AXIS-HIGH-SPEED-VERTICAL-MACHINING-CENTER-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/DMG-GILDEMEISTER-SPRINT-20-8-LINEAR-CNC-SLIDING-HEAD-STOCK-LATHE-SWISS-TYPE-WITH-8-CONTROLLED-AXIS-AND-BAR-FEEDER-2011-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/HAAS-VF-7-40-CNC-VERTICAL-MACHINING-CENTRE-HIGH-SPEED-2015-3-AXIS-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/TRUMPF-TRULASER-5040-TRUFLOW-7KW-LASER-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/MAZAK-QUICK-TURN-250MA-500-SMOOTHG-USED-LATHE-MADE-IN-JAPAN-2017-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. NEGOTIABLE PRICES, INCLUDING DISASSEMBLY AND LOADING, EXCEPT SOLD, CENTRAL EUROPE BEST REGARDS/SINCERELY/CORDIALI SALUTI/MEILLEURES SALUTATIONS THE MYTH OF FRIENDLY GRüßEN/SALUDOS CORDIALES.A ATTE.SALUDOS HONORABLE/C C ?????????/????? ARTE FERRUM
Vendedor: ARTE FERRUM
Año de construcción: usado
Precio: 41.430 €
Ubicación: Land-: 315 mm<br/>: 630 mm<br/>: 430 mm<br/>: 830 mm<br/>: 400 mm<br/>: 2.000 mm<br/>: . 11 nr<br/>: 103 mm<br/>: 120 m<br/>: 11 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 3.310 kg<br/>driven by variable speed control (2 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 315 mm<br/>spindle dead center<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/> <br/>   turning length 1.000 mm ? 39.220,-   turning length 1.500 mm ? 40.050,-   turning length 3.000 mm ? 45.240,-   turning length 4.000 mm ? 49.620,-   turning length 5.000 mm ? 60.260,-   <br/><br/> <br/><br/>entre height: 315 mm<br/>swing over bed: 630 mm<br/>swing over cross slide: 430 mm<br/>swing in gap: 830 mm<br/>width of bed: 400 mm<br/>distance between centers: 2.000 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 103 mm<br/>spindle taper: m 120<br/>spindle speeds (infinitely variable in 3 subranges): 16 - 63, 63 - 250, 315 - 1.250 r/min<br/>main motor power: 11 kw<br/>number of feeds: 120<br/>longitudinal feed range: 0,04 - 12 mm/r<br/>cross feed range: 0,02 - 6 mm/r<br/>number of threads: 	<br/>metric thread range (64): 0,5 - 120 mm<br/>inch thread rangel (64): 60 - 1/4 tpi<br/>module thread range (64): 0,125 - 30<br/>dp thread range (64): 240 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 3.310 kg<br/><br/><br/><br/> : 315 MM
: 630 MM
: 430 MM
: 830 MM
: 400 MM
: 2.000 MM
: . 11 NR
: 103 MM
: 120 M
: 11 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 3.310 KG
DRIVEN BY VARIABLE SPEED CONTROL (2 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 315 MM
SPINDLE DEAD CENTER
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:
 
TURNING LENGTH 1.000 MM ? 39.220,- TURNING LENGTH 1.500 MM ? 40.050,- TURNING LENGTH 3.000 MM ? 45.240,- TURNING LENGTH 4.000 MM ? 49.620,- TURNING LENGTH 5.000 MM ? 60.260,-



ENTRE HEIGHT: 315 MM
SWING OVER BED: 630 MM
SWING OVER CROSS SLIDE: 430 MM
SWING IN GAP: 830 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 2.000 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 103 MM
SPINDLE TAPER: M 120
SPINDLE SPEEDS (INFINITELY VARIABLE IN 3 SUBRANGES): 16 - 63, 63 - 250, 315 - 1.250 R/MIN
MAIN MOTOR POWER: 11 KW
NUMBER OF FEEDS: 120
LONGITUDINAL FEED RANGE: 0,04 - 12 MM/R
CROSS FEED RANGE: 0,02 - 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (64): 0,5 - 120 MM
INCH THREAD RANGEL (64): 60 - 1/4 TPI
MODULE THREAD RANGE (64): 0,125 - 30
DP THREAD RANGE (64): 240 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 3.310 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 2.200 €
Ubicación: Land-centre distance: 762 mm<br/>  transmission rate: peak height: 130 mm<br/>  turning diameter over bed:<br/>   in the bridge:<br/>   over slide: 250 mm<br/>   <br/>  100 mm<br/>  speed range: 85 to 2,000 rpm<br/>  advance: port: accessories/equipment: condition: good<br/>  weight: 0.7 t<br/>  dimensions: 1,800 x 800 x 1600 mm CENTRE DISTANCE: 762 MM
TRANSMISSION RATE: PEAK HEIGHT: 130 MM
TURNING DIAMETER OVER BED:
IN THE BRIDGE:
OVER SLIDE: 250 MM

100 MM
SPEED RANGE: 85 TO 2,000 RPM
ADVANCE: PORT: ACCESSORIES/EQUIPMENT: CONDITION: GOOD
WEIGHT: 0.7 T
DIMENSIONS: 1,800 X 800 X 1600 MM
Vendedor: Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Año de construcción: usado
Precio: 34.530 €
Ubicación: Land-: 250 mm<br/>: 500 mm<br/>: 300 mm<br/>: 700 mm<br/>: 400 mm<br/>: 1.500 mm<br/>: . 8 nr<br/>: 72 mm<br/>: 80 m<br/>: 11 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 2.950 kg<br/>driven by variable speed control (3 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 250 mm<br/>spindle dead center<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo) <br/><br/>further turning lengths:<br/><br/>   turning length 1.000 mm ? 33.700,-   turning length 2.000 mm ? 35.910,-   turning length 3.000 mm ? 39.720,-   turning length 4.000 mm ? 44.100,-   turning length 5.000 mm ? 54.740,-   <br/><br/><br/><br/>centre height: 250 mm<br/>swing over bed: 500 mm<br/>swing over cross slide: 300 mm<br/>swing in gap: 700 mm<br/>width of bed: 400 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 8<br/>spindlebore: 72 mm<br/>spindle taper: mt 80<br/>spindle speeds (infinitely variable in 3 subranges): 25 - 100, 100 - 400, 500 - 2.000 rpm<br/>main motor power: 11 kw<br/>number of feeds: 120<br/>longitudinal feed range: 0,04 - 12 mm/r<br/>cross feed range: 0,02 - 6 mm/r<br/>number of threads: 	<br/>metric thread range (64): 0,5 - 120 mm<br/>inch thread rangel (64): 60 - 1/4 tpi<br/>module thread range (64): 0,125 - 30<br/>dp thread range (64): 240 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 2.950 kg<br/><br/><br/><br/> : 250 MM
: 500 MM
: 300 MM
: 700 MM
: 400 MM
: 1.500 MM
: . 8 NR
: 72 MM
: 80 M
: 11 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 2.950 KG
DRIVEN BY VARIABLE SPEED CONTROL (3 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 250 MM
SPINDLE DEAD CENTER
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:

TURNING LENGTH 1.000 MM ? 33.700,- TURNING LENGTH 2.000 MM ? 35.910,- TURNING LENGTH 3.000 MM ? 39.720,- TURNING LENGTH 4.000 MM ? 44.100,- TURNING LENGTH 5.000 MM ? 54.740,-



CENTRE HEIGHT: 250 MM
SWING OVER BED: 500 MM
SWING OVER CROSS SLIDE: 300 MM
SWING IN GAP: 700 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 8
SPINDLEBORE: 72 MM
SPINDLE TAPER: MT 80
SPINDLE SPEEDS (INFINITELY VARIABLE IN 3 SUBRANGES): 25 - 100, 100 - 400, 500 - 2.000 RPM
MAIN MOTOR POWER: 11 KW
NUMBER OF FEEDS: 120
LONGITUDINAL FEED RANGE: 0,04 - 12 MM/R
CROSS FEED RANGE: 0,02 - 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (64): 0,5 - 120 MM
INCH THREAD RANGEL (64): 60 - 1/4 TPI
MODULE THREAD RANGE (64): 0,125 - 30
DP THREAD RANGE (64): 240 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 2.950 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-gebr. l + z lathe make zmm/bulmak
	model cu 400 m. no.: 32536 year 2002

tip height 220 mm
	top width 1000 mm
	turning diameter:
	bed 440 mm
		support 240 mm
		in the bridge 640 mm
	spindle bore 72 mm
	tailstock mk 5
	21 spindle speeds in three levels 20-2000 rpm
	motor 7,5 kw
	external dimensions:
	length 2700 mm
		width 1300 mm
		height 1600 mm
	weight approx.		2650 kg
	with:
	3-axis digital acu rite
		6 - jaw chuck 250 mm ã? with jaws
		rapid traverse in the support
		cone wheel
		quick change toolpost
		fixed lynette
		coolant system

GEBR. L + Z LATHE MAKE ZMM/BULMAK MODEL CU 400 M. NO.: 32536 YEAR 2002 TIP HEIGHT 220 MM TOP WIDTH 1000 MM TURNING DIAMETER: BED 440 MM SUPPORT 240 MM IN THE BRIDGE 640 MM SPINDLE BORE 72 MM TAILSTOCK MK 5 21 SPINDLE SPEEDS IN THREE LEVELS 20-2000 RPM MOTOR 7,5 KW EXTERNAL DIMENSIONS: LENGTH 2700 MM WIDTH 1300 MM HEIGHT 1600 MM WEIGHT APPROX. 2650 KG WITH: 3-AXIS DIGITAL ACU RITE 6 - JAW CHUCK 250 MM &ATILDE;? WITH JAWS RAPID TRAVERSE IN THE SUPPORT CONE WHEEL QUICK CHANGE TOOLPOST FIXED LYNETTE COOLANT SYSTEM
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: 56.020 €
Ubicación: Land-: 430 mm<br/>: 860 mm<br/>: 620 mm<br/>: 1.050 mm<br/>: 560 mm<br/>: 1.500 mm<br/>: . 11 nr<br/>: 132 mm<br/>: 140 m<br/>: 15 kw<br/>: 435 mm<br/>: 150 mm<br/>: 105 mm<br/>: 6 mk<br/>: 225 mm<br/>: 4.650 kg<br/>driven by conventional transmission<br/>3-axes digital readout<br/>quick change toolpost amestra type multifix with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3295/din6350, Ø 400 mm<br/>spindle dead center<br/>main motor with frequency invertor<br/>four way rapid traverse device<br/>foot pedal brake<br/>longitudinal stop for 1 position<br/>steady and following rest<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>tailstock quill reducer<br/>mechanized movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm ? 46.040,-   turning length 2.000 mm ? 48.120,-   turning length 4.000 mm ? 61.960,-   turning length 5.000 mm ? 70.850,-   turning length 6.000 mm ? 80.400,-   <br/><br/>centre height: 430 mm<br/>swing over bed: 860 mm<br/>swing over cross slide: 620 mm<br/>swing in gap: 1.050 mm<br/>width of bed: 560 mm<br/>distance between centers: 	1.500 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 132 mm<br/>spindle taper: m 140<br/>spindle speeds (17): 7,5 - 1.015 rpm<br/>main motor power: 15 kw<br/>number of feeds: 150<br/>longitudinal feed range: 0,039 - 18 mm/r<br/>cross feed range: 0,02 - 9 mm/r<br/>number of threads: 	<br/>metric thread range (76): 0,5 - 180 mm<br/>inch thread rangel (76): 60 - 1/6 tpi<br/>module thread range (76):  0,125 - 45<br/>dp thread range (76): 240 - 2/3<br/>cross slide travel: 435 mm<br/>top slide travel: 150 mm<br/>tailstock quill diameter: 105 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 	225 mm<br/>weight approx.: 4.650 kg<br/><br/><br/><br/> : 430 MM
: 860 MM
: 620 MM
: 1.050 MM
: 560 MM
: 1.500 MM
: . 11 NR
: 132 MM
: 140 M
: 15 KW
: 435 MM
: 150 MM
: 105 MM
: 6 MK
: 225 MM
: 4.650 KG
DRIVEN BY CONVENTIONAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3295/DIN6350, Ø 400 MM
SPINDLE DEAD CENTER
MAIN MOTOR WITH FREQUENCY INVERTOR
FOUR WAY RAPID TRAVERSE DEVICE
FOOT PEDAL BRAKE
LONGITUDINAL STOP FOR 1 POSITION
STEADY AND FOLLOWING REST
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
TAILSTOCK QUILL REDUCER
MECHANIZED MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM ? 46.040,- TURNING LENGTH 2.000 MM ? 48.120,- TURNING LENGTH 4.000 MM ? 61.960,- TURNING LENGTH 5.000 MM ? 70.850,- TURNING LENGTH 6.000 MM ? 80.400,-

CENTRE HEIGHT: 430 MM
SWING OVER BED: 860 MM
SWING OVER CROSS SLIDE: 620 MM
SWING IN GAP: 1.050 MM
WIDTH OF BED: 560 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 132 MM
SPINDLE TAPER: M 140
SPINDLE SPEEDS (17): 7,5 - 1.015 RPM
MAIN MOTOR POWER: 15 KW
NUMBER OF FEEDS: 150
LONGITUDINAL FEED RANGE: 0,039 - 18 MM/R
CROSS FEED RANGE: 0,02 - 9 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (76): 0,5 - 180 MM
INCH THREAD RANGEL (76): 60 - 1/6 TPI
MODULE THREAD RANGE (76): 0,125 - 45
DP THREAD RANGE (76): 240 - 2/3
CROSS SLIDE TRAVEL: 435 MM
TOP SLIDE TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 105 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 225 MM
WEIGHT APPROX.: 4.650 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-lathe with frequency-controlled spindle speed<br/>  tip height 705 mm<br/>  maximum diameter over bed 1,410 mm<br/>  maximum diameter over support 1000 mm<br/>  guide width 800 mm<br/>  top width 3,000 mm<br/>  spindle bore 205 mm<br/>  spindle mount din 55027 a 15<br/>  inner taper of spindle bore 215 spindle speeds variable in four stages speed range 1,5-500 rpm main motor 45 kw<br/>  number of feeds 160<br/>  longitudinal feeds 0.032 38,9 mm / rev<br/>  cross feeds 0.016 - 19.45 mm / u number of thread 80<br/>  metric thread 0.5-480 mm inch - thread 60 - 1/16 tpi module thread module 0.125 - 120 dp - dp 240 thread - 1/4<br/>  cross travel of support 730 mm<br/>  longitudinal travel of support 350 mm<br/>  quill diameter 200 mm<br/>  spindle mount mt 7<br/>  quill stroke 300 mm<br/>  machine weight 14 t accessories: true appointment, charges apply digital display, face plate, three-jaw chuck, bezel, multifix and others. LATHE WITH FREQUENCY-CONTROLLED SPINDLE SPEED
TIP HEIGHT 705 MM
MAXIMUM DIAMETER OVER BED 1,410 MM
MAXIMUM DIAMETER OVER SUPPORT 1000 MM
GUIDE WIDTH 800 MM
TOP WIDTH 3,000 MM
SPINDLE BORE 205 MM
SPINDLE MOUNT DIN 55027 A 15
INNER TAPER OF SPINDLE BORE 215 SPINDLE SPEEDS VARIABLE IN FOUR STAGES SPEED RANGE 1,5-500 RPM MAIN MOTOR 45 KW
NUMBER OF FEEDS 160
LONGITUDINAL FEEDS 0.032 38,9 MM / REV
CROSS FEEDS 0.016 - 19.45 MM / U NUMBER OF THREAD 80
METRIC THREAD 0.5-480 MM INCH - THREAD 60 - 1/16 TPI MODULE THREAD MODULE 0.125 - 120 DP - DP 240 THREAD - 1/4
CROSS TRAVEL OF SUPPORT 730 MM
LONGITUDINAL TRAVEL OF SUPPORT 350 MM
QUILL DIAMETER 200 MM
SPINDLE MOUNT MT 7
QUILL STROKE 300 MM
MACHINE WEIGHT 14 T ACCESSORIES: TRUE APPOINTMENT, CHARGES APPLY DIGITAL DISPLAY, FACE PLATE, THREE-JAW CHUCK, BEZEL, MULTIFIX AND OTHERS.
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 78.740 €
Ubicación: Land-: 400 mm<br/>: 890 mm<br/>: 490 mm<br/>: 1.050 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 22/30 kw<br/>: 525 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 7.500 kg<br/>driven by manual transmission<br/>3-axes digital readout<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/><br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm  ? 62.600,-   turning length 3.000 mm  ? 68.290,-   turning length 5.000 mm  ? 83.770,-   turning length 6.000 mm  ? 101.030,-   <br/><br/>entre height: 400 mm<br/>swing over bed: 890 mm<br/>swing over cross slide: 490 mm<br/>swing in gap: 1.050 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (24): 6,3 - 1.250 rpm<br/>main motor power: 22/30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 - 38,9 mm/r<br/>cross feed range: 0,016 - 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 	260 mm<br/>weight approx.: 7.500 kg<br/><br/><br/><br/> : 400 MM
: 890 MM
: 490 MM
: 1.050 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 22/30 KW
: 525 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 7.500 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)


FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM  ? 62.600,- TURNING LENGTH 3.000 MM  ? 68.290,- TURNING LENGTH 5.000 MM  ? 83.770,- TURNING LENGTH 6.000 MM  ? 101.030,-

ENTRE HEIGHT: 400 MM
SWING OVER BED: 890 MM
SWING OVER CROSS SLIDE: 490 MM
SWING IN GAP: 1.050 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (24): 6,3 - 1.250 RPM
MAIN MOTOR POWER: 22/30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 - 38,9 MM/R
CROSS FEED RANGE: 0,016 - 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 7.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc - control siemens<br/>  tip height 635 mm,.<br/>  swing over bed 1,320 mm,.<br/>  swing over cross slide 940 mm,.<br/>  bed width 700 mm.<br/>  top width 1,500 mm, 3.000 mm, 4,000 mm, 5,000 mm, 6,000 mm,.<br/>  spindle hole 155 mm,.<br/>  speed ranges 2-180 rpm, 8-700 rpm,.<br/>  maximum torque at main spindle 5,000 nm.<br/>  rapid traverse of x - and z - axis 8 m / min, cross travel of carriage 650 mm,<br/>  turret fabr. duplomatic with eight positions,<br/>  the main spindle of 30 kw,<br/>  diameter of tailstock quill 125 mm, maximum stroke of the tailstock sleeve 250 mm, weight machine with a top width of 3000 mm 9.8 t powered tailstock CNC - CONTROL SIEMENS
TIP HEIGHT 635 MM,.
SWING OVER BED 1,320 MM,.
SWING OVER CROSS SLIDE 940 MM,.
BED WIDTH 700 MM.
TOP WIDTH 1,500 MM, 3.000 MM, 4,000 MM, 5,000 MM, 6,000 MM,.
SPINDLE HOLE 155 MM,.
SPEED RANGES 2-180 RPM, 8-700 RPM,.
MAXIMUM TORQUE AT MAIN SPINDLE 5,000 NM.
RAPID TRAVERSE OF X - AND Z - AXIS 8 M / MIN, CROSS TRAVEL OF CARRIAGE 650 MM,
TURRET FABR. DUPLOMATIC WITH EIGHT POSITIONS,
THE MAIN SPINDLE OF 30 KW,
DIAMETER OF TAILSTOCK QUILL 125 MM, MAXIMUM STROKE OF THE TAILSTOCK SLEEVE 250 MM, WEIGHT MACHINE WITH A TOP WIDTH OF 3000 MM 9.8 T POWERED TAILSTOCK
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 25.200 €
Ubicación: Land-: 200 mm<br/>: 400 mm<br/>: 235 mm<br/>: 550 mm<br/>: 320 mm<br/>: 750 mm<br/>: . 6 nr<br/>: 52 mm<br/>: 6 mk<br/>: 7,5 kw<br/>: 235 mm<br/>: 110 mm<br/>: 50 mm<br/>: 4 mk<br/>: 100 mm<br/>: 1.530 kg<br/>driven by variable speed control (4 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 200 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/>    turning length 1.000 mm  ? 25.720,-    turning length 1.500 mm  ? 26.730,-   <br/><br/> <br/><br/>center height: 200 mm<br/>swing over bed: 400 mm<br/>swing over cross slide: 235 mm<br/>swing in gap: 550 mm<br/>width of bed: 320 mm<br/>distance between centers: 750 mm<br/>spindle nose / din55027: no. 6 <br/>spindle bore: 52 mm<br/>spindle taper: mt 6<br/>spindle speeds (infinitely variable in 4 subranges): 18-98, 48-265, 144-790, 385-2.120 rpm<br/>main motor power: 7,5 kw<br/>number of feeds: 80<br/>longitudinal feed range: 0,015 - 0,6 mm/u<br/>cross feed range: 0,0075 - 0,3 mm/u<br/>number of threads: 40<br/>metric thread range: 0,25 - 7,5 mm<br/>inch thread rangel: 120 - 4 tpi<br/>module thread range: 0,0625 - 1,875<br/>dp thread range: 480 - 16<br/>cross slide travel: 235 mm<br/>top slide travel: 110 mm<br/>tailstock quill diameter: 50 mm<br/>tailstock quill taper: mk 4<br/>tailstock travel: 100 mm<br/>weight approx.: 1.530 kg<br/><br/><br/><br/> : 200 MM
: 400 MM
: 235 MM
: 550 MM
: 320 MM
: 750 MM
: . 6 NR
: 52 MM
: 6 MK
: 7,5 KW
: 235 MM
: 110 MM
: 50 MM
: 4 MK
: 100 MM
: 1.530 KG
DRIVEN BY VARIABLE SPEED CONTROL (4 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 200 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:

 TURNING LENGTH 1.000 MM  ? 25.720,-  TURNING LENGTH 1.500 MM  ? 26.730,-



CENTER HEIGHT: 200 MM
SWING OVER BED: 400 MM
SWING OVER CROSS SLIDE: 235 MM
SWING IN GAP: 550 MM
WIDTH OF BED: 320 MM
DISTANCE BETWEEN CENTERS: 750 MM
SPINDLE NOSE / DIN55027: NO. 6
SPINDLE BORE: 52 MM
SPINDLE TAPER: MT 6
SPINDLE SPEEDS (INFINITELY VARIABLE IN 4 SUBRANGES): 18-98, 48-265, 144-790, 385-2.120 RPM
MAIN MOTOR POWER: 7,5 KW
NUMBER OF FEEDS: 80
LONGITUDINAL FEED RANGE: 0,015 - 0,6 MM/U
CROSS FEED RANGE: 0,0075 - 0,3 MM/U
NUMBER OF THREADS: 40
METRIC THREAD RANGE: 0,25 - 7,5 MM
INCH THREAD RANGEL: 120 - 4 TPI
MODULE THREAD RANGE: 0,0625 - 1,875
DP THREAD RANGE: 480 - 16
CROSS SLIDE TRAVEL: 235 MM
TOP SLIDE TRAVEL: 110 MM
TAILSTOCK QUILL DIAMETER: 50 MM
TAILSTOCK QUILL TAPER: MK 4
TAILSTOCK TRAVEL: 100 MM
WEIGHT APPROX.: 1.530 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc - control siemens sinumerik<br/>  center height 280 mm,.<br/>  maximum diameter over bed 580 mm,.<br/>  maximum diameter over support 310 mm,.<br/>  guide width 400 mm,.<br/>  top width 1,000 mm, 1,500 mm, 2000 mm,<br/>  spindle bore 72 mm,.<br/>  spindle mount din 55027 no. 8.<br/>  inner taper of spindle bore metric 80 spindle speeds variable in three steps, speed range 25-125 / 100-500 / 500 - 2,500 rpm, power of the main motor 15 kw,<br/>  maximum spindle torque 1,120 nm,.<br/>  rapid traverse x and z - axis each 8 m / min,<br/>  cross support travel 350 mm,.<br/>  quill diameter 90 mm,.<br/>  spindle mount mt 5,<br/>  quill stroke 230 mm,.<br/>  tool holder quick changer bsv n 200,.<br/>  weight for the centre distance 1885 mm (2,000 mm) 3.8 t accessories: chip conveyor  CNC - CONTROL SIEMENS SINUMERIK
CENTER HEIGHT 280 MM,.
MAXIMUM DIAMETER OVER BED 580 MM,.
MAXIMUM DIAMETER OVER SUPPORT 310 MM,.
GUIDE WIDTH 400 MM,.
TOP WIDTH 1,000 MM, 1,500 MM, 2000 MM,
SPINDLE BORE 72 MM,.
SPINDLE MOUNT DIN 55027 NO. 8.
INNER TAPER OF SPINDLE BORE METRIC 80 SPINDLE SPEEDS VARIABLE IN THREE STEPS, SPEED RANGE 25-125 / 100-500 / 500 - 2,500 RPM, POWER OF THE MAIN MOTOR 15 KW,
MAXIMUM SPINDLE TORQUE 1,120 NM,.
RAPID TRAVERSE X AND Z - AXIS EACH 8 M / MIN,
CROSS SUPPORT TRAVEL 350 MM,.
QUILL DIAMETER 90 MM,.
SPINDLE MOUNT MT 5,
QUILL STROKE 230 MM,.
TOOL HOLDER QUICK CHANGER BSV N 200,.
WEIGHT FOR THE CENTRE DISTANCE 1885 MM (2,000 MM) 3.8 T ACCESSORIES: CHIP CONVEYOR
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 113.780 €
Ubicación: Land-: 625 mm<br/>: 1.320 mm<br/>: 940 mm<br/>: 1.500 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 22/30 kw<br/>: 685 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 8.550 kg<br/>driven by manual transmission<br/>3-axes digital readout<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm ? 75.250,-   turning length 3.000 mm ? 81.040,-   turning length 4.000 mm ? 91.390,-   turning length 5.000 mm ? 96.510,-   <br/><br/>entre height: 625 mm<br/>swing over bed: 1.320 mm<br/>swing over cross slide: 940 mm<br/>swing in gap: 1.500 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (24): 5 - 1.000 rpm<br/>main motor power: 22/30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 - 38,9 mm/r<br/>cross feed range: 0,016 - 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 260 mm<br/>weight approx.: 8.550 kg<br/><br/><br/><br/> : 625 MM
: 1.320 MM
: 940 MM
: 1.500 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 22/30 KW
: 685 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 8.550 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)
FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM ? 75.250,- TURNING LENGTH 3.000 MM ? 81.040,- TURNING LENGTH 4.000 MM ? 91.390,- TURNING LENGTH 5.000 MM ? 96.510,-

ENTRE HEIGHT: 625 MM
SWING OVER BED: 1.320 MM
SWING OVER CROSS SLIDE: 940 MM
SWING IN GAP: 1.500 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (24): 5 - 1.000 RPM
MAIN MOTOR POWER: 22/30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 - 38,9 MM/R
CROSS FEED RANGE: 0,016 - 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 8.550 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc - control siemens<br/>  tip height 510 mm,.<br/>  swing over bed 1.090 mm;<br/>  swing over cross slide 690 mm,.<br/>  bed width 700 mm.<br/>  top width 1,500 mm, 3.000 mm, 4,000 mm, 5,000 mm, 6,000 mm,.<br/>  spindle hole 155 mm,.<br/>  speed ranges 2-180 rpm, 8-700 rpm,.<br/>  maximum torque at main spindle 5,000 nm.<br/>  rapid traverse of x - and z - axis 8 m / min, cross travel of carriage 525 mm,.<br/>  turret fabr. duplomatic with eight positions,<br/>  the main spindle of 30 kw,<br/>  diameter of tailstock quill 125 mm, maximum stroke of the tailstock sleeve 250 mm, weight machine with a top width of 3000 mm 9.3 t powered tailstock CNC - CONTROL SIEMENS
TIP HEIGHT 510 MM,.
SWING OVER BED 1.090 MM;
SWING OVER CROSS SLIDE 690 MM,.
BED WIDTH 700 MM.
TOP WIDTH 1,500 MM, 3.000 MM, 4,000 MM, 5,000 MM, 6,000 MM,.
SPINDLE HOLE 155 MM,.
SPEED RANGES 2-180 RPM, 8-700 RPM,.
MAXIMUM TORQUE AT MAIN SPINDLE 5,000 NM.
RAPID TRAVERSE OF X - AND Z - AXIS 8 M / MIN, CROSS TRAVEL OF CARRIAGE 525 MM,.
TURRET FABR. DUPLOMATIC WITH EIGHT POSITIONS,
THE MAIN SPINDLE OF 30 KW,
DIAMETER OF TAILSTOCK QUILL 125 MM, MAXIMUM STROKE OF THE TAILSTOCK SLEEVE 250 MM, WEIGHT MACHINE WITH A TOP WIDTH OF 3000 MM 9.3 T POWERED TAILSTOCK
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 52.620 €
Ubicación: Land-: 380 mm<br/>: 760 mm<br/>: 520 mm<br/>: 950 mm<br/>: 560 mm<br/>: 3.000 mm<br/>: . 11 nr<br/>: 132 mm<br/>: 140 m<br/>: 11/15 kw<br/>: 410 mm<br/>: 150 mm<br/>: 105 mm<br/>: 6 mk<br/>: 225 mm<br/>: 4.470 kg<br/>driven by conventional transmission<br/>3-axes digital readout<br/>quick change toolpost amestra type multifix with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3295/din6350, Ø 400 mm<br/>spindle dead center<br/>main motor with frequency invertor<br/>four way rapid traverse device<br/>foot pedal brake<br/>longitudinal stop for 1 position<br/>steady and following rest<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>tailstock quill reducer<br/>mechanized movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo) <br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm ? 42.740,-   turning length 2.000 mm ? 44.820,-   turning length 4.000 mm ? 58.660,-   turning length 5.000 mm ? 67.550,-   turning length 6.000 mm ? 77.100,-   <br/><br/>centre height: 380 mm<br/>swing over bed: 760 mm<br/>swing over cross slide: 520 mm<br/>swing in gap: 950 mm<br/>width of bed: 560 mm<br/>distance between centers: 3.000 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 132 mm<br/>spindle taper: m 140<br/>spindle speeds (17): 7,5 - 1.015 rpm<br/>main motor power: 11/15 kw<br/>number of feeds: 150<br/>longitudinal feed range: 0,039 - 18 mm/r<br/>cross feed range: 0,02 - 9 mm/r<br/>number of threads: 	<br/>metric thread range (76): 0,5 - 180 mm<br/>inch thread rangel (76): 60 - 1/6 tpi<br/>module thread range (76): 0,125 - 45<br/>dp thread range (76): 240 - 2/3<br/>cross slide travel: 410 mm<br/>top slide travel: 150 mm<br/>tailstock quill diameter: 105 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 225 mm<br/>weight approx.: 4.470 kg<br/><br/><br/><br/> : 380 MM
: 760 MM
: 520 MM
: 950 MM
: 560 MM
: 3.000 MM
: . 11 NR
: 132 MM
: 140 M
: 11/15 KW
: 410 MM
: 150 MM
: 105 MM
: 6 MK
: 225 MM
: 4.470 KG
DRIVEN BY CONVENTIONAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3295/DIN6350, Ø 400 MM
SPINDLE DEAD CENTER
MAIN MOTOR WITH FREQUENCY INVERTOR
FOUR WAY RAPID TRAVERSE DEVICE
FOOT PEDAL BRAKE
LONGITUDINAL STOP FOR 1 POSITION
STEADY AND FOLLOWING REST
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
TAILSTOCK QUILL REDUCER
MECHANIZED MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM ? 42.740,- TURNING LENGTH 2.000 MM ? 44.820,- TURNING LENGTH 4.000 MM ? 58.660,- TURNING LENGTH 5.000 MM ? 67.550,- TURNING LENGTH 6.000 MM ? 77.100,-

CENTRE HEIGHT: 380 MM
SWING OVER BED: 760 MM
SWING OVER CROSS SLIDE: 520 MM
SWING IN GAP: 950 MM
WIDTH OF BED: 560 MM
DISTANCE BETWEEN CENTERS: 3.000 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 132 MM
SPINDLE TAPER: M 140
SPINDLE SPEEDS (17): 7,5 - 1.015 RPM
MAIN MOTOR POWER: 11/15 KW
NUMBER OF FEEDS: 150
LONGITUDINAL FEED RANGE: 0,039 - 18 MM/R
CROSS FEED RANGE: 0,02 - 9 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (76): 0,5 - 180 MM
INCH THREAD RANGEL (76): 60 - 1/6 TPI
MODULE THREAD RANGE (76): 0,125 - 45
DP THREAD RANGE (76): 240 - 2/3
CROSS SLIDE TRAVEL: 410 MM
TOP SLIDE TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 105 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 225 MM
WEIGHT APPROX.: 4.470 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-universal lathe with variable spindle speed
tip height                                  315 mm
swing over bed                              630 mm  
swing over cross slide                      430 mm
swing in the offset                         830 mm
bed width                                   400 mm
top width 1000 mm, 1500 mm, 2000 mm, 3000 mm, 4000 mm, 5000 mm
spindle bore                                103 mm
speed range identified in                 16-63, 63-250 and 315-1250 rpm  
number of feeds                             120
cross travel of carriage                    315 mm
longitudinal travel of the upper carriage   130 mm
tailstock way                               230 mm
drive power                                  11 kw  
machine weight with centre distance 2000 mm   3.31 t 
accessories: optional digital display, three - or four-jaw chuck, face plate, 
             bezel, multifix   UNIVERSAL LATHE WITH VARIABLE SPINDLE SPEED TIP HEIGHT 315 MM SWING OVER BED 630 MM SWING OVER CROSS SLIDE 430 MM SWING IN THE OFFSET 830 MM BED WIDTH 400 MM TOP WIDTH 1000 MM, 1500 MM, 2000 MM, 3000 MM, 4000 MM, 5000 MM SPINDLE BORE 103 MM SPEED RANGE IDENTIFIED IN 16-63, 63-250 AND 315-1250 RPM NUMBER OF FEEDS 120 CROSS TRAVEL OF CARRIAGE 315 MM LONGITUDINAL TRAVEL OF THE UPPER CARRIAGE 130 MM TAILSTOCK WAY 230 MM DRIVE POWER 11 KW MACHINE WEIGHT WITH CENTRE DISTANCE 2000 MM 3.31 T ACCESSORIES: OPTIONAL DIGITAL DISPLAY, THREE - OR FOUR-JAW CHUCK, FACE PLATE, BEZEL, MULTIFIX
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 21.940 €
Ubicación: Land-: 200 mm<br/>: 400 mm<br/>: 235 mm<br/>: 550 mm<br/>: 320 mm<br/>: 1.000 mm<br/>: . 6 nr<br/>: 52 mm<br/>: 6 mk<br/>: 4 kw<br/>: 235 mm<br/>: 110 mm<br/>: 50 mm<br/>: 4 mk<br/>: 100 mm<br/>: 2.750 mm<br/>: 1.100 mm<br/>: 1.600 mm<br/>: 1.540 kg<br/>driven by manual transmission<br/>3-axes digital readout fagor<br/>quick change toolpost multisuisse with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 200 mm<br/>spindle nose nr. 6 din 55027<br/>four way rapid traverse device<br/>spindle dead center<br/>coolant equipment<br/>removable bridge<br/>1 pce. flange plate for lathe chuck Ø 200 mm<br/>1 adapter sleeve<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/><br/>   turning length 750 mm ? 21.540,-   turning length 1.500 mm ? 22.900,-   <br/><br/> <br/><br/>center height: 200 mm<br/>swing over bed: 400 mm<br/>swing over cross slide: 235 mm<br/>swing in gap: 550 mm<br/>width of bed: 320 mm<br/>distance between centers: 1.000 mm<br/>spindle nose / din55027: no. 6<br/>spindle bore: 52 mm<br/>spindle taper: mt 6<br/>spindle speeds (12): 50-2.240 rpm<br/>main motor power: 4 kw<br/>number of feeds: 80<br/>longitudinal feed range: 0,015 - 0,6 mm/u<br/>cross feed range: 0,0075 - 0,3 mm/u<br/>number of threads: 40<br/>metric thread range: 0,25 - 7,5 mm<br/>inch thread rangel: 120 - 4 tpi<br/>module thread range: 0,0625 - 1,875<br/>dp thread range: 480 - 16<br/>cross slide travel: 235 mm<br/>top slide travel: 110 mm<br/>tailstock quill diameter: 50 mm<br/>tailstock quill taper: mk 4<br/>tailstock travel: 100 mm<br/>length: 2.750 mm<br/>width: 1.100 mm<br/>height: 1.600 mm<br/>weight approx.: 1.540 kg<br/><br/><br/><br/> : 200 MM
: 400 MM
: 235 MM
: 550 MM
: 320 MM
: 1.000 MM
: . 6 NR
: 52 MM
: 6 MK
: 4 KW
: 235 MM
: 110 MM
: 50 MM
: 4 MK
: 100 MM
: 2.750 MM
: 1.100 MM
: 1.600 MM
: 1.540 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT FAGOR
QUICK CHANGE TOOLPOST MULTISUISSE WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 200 MM
SPINDLE NOSE NR. 6 DIN 55027
FOUR WAY RAPID TRAVERSE DEVICE
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
REMOVABLE BRIDGE
1 PCE. FLANGE PLATE FOR LATHE CHUCK Ø 200 MM
1 ADAPTER SLEEVE
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 750 MM ? 21.540,- TURNING LENGTH 1.500 MM ? 22.900,-



CENTER HEIGHT: 200 MM
SWING OVER BED: 400 MM
SWING OVER CROSS SLIDE: 235 MM
SWING IN GAP: 550 MM
WIDTH OF BED: 320 MM
DISTANCE BETWEEN CENTERS: 1.000 MM
SPINDLE NOSE / DIN55027: NO. 6
SPINDLE BORE: 52 MM
SPINDLE TAPER: MT 6
SPINDLE SPEEDS (12): 50-2.240 RPM
MAIN MOTOR POWER: 4 KW
NUMBER OF FEEDS: 80
LONGITUDINAL FEED RANGE: 0,015 - 0,6 MM/U
CROSS FEED RANGE: 0,0075 - 0,3 MM/U
NUMBER OF THREADS: 40
METRIC THREAD RANGE: 0,25 - 7,5 MM
INCH THREAD RANGEL: 120 - 4 TPI
MODULE THREAD RANGE: 0,0625 - 1,875
DP THREAD RANGE: 480 - 16
CROSS SLIDE TRAVEL: 235 MM
TOP SLIDE TRAVEL: 110 MM
TAILSTOCK QUILL DIAMETER: 50 MM
TAILSTOCK QUILL TAPER: MK 4
TAILSTOCK TRAVEL: 100 MM
LENGTH: 2.750 MM
WIDTH: 1.100 MM
HEIGHT: 1.600 MM
WEIGHT APPROX.: 1.540 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-control siemens sinumerik, fanuc optional, tip height 510 mm swing over bed 1,090 mm, swing over cross slide bed width 690 mm, 700 mm, tip width 1,500 mm, 3000 mm, 4,000 mm, 5000 mm and 6000 mm, spindle bore 155 mm, speed ranges 2-180 rpm and 8-700 rpm, 8-position tool turret antriebslseistung at the main spindle of 30 kw, machine weight with centre distance 3000 mm: 9.3 t, controlled tailstock CONTROL SIEMENS SINUMERIK, FANUC OPTIONAL, TIP HEIGHT 510 MM SWING OVER BED 1,090 MM, SWING OVER CROSS SLIDE BED WIDTH 690 MM, 700 MM, TIP WIDTH 1,500 MM, 3000 MM, 4,000 MM, 5000 MM AND 6000 MM, SPINDLE BORE 155 MM, SPEED RANGES 2-180 RPM AND 8-700 RPM, 8-POSITION TOOL TURRET ANTRIEBSLSEISTUNG AT THE MAIN SPINDLE OF 30 KW, MACHINE WEIGHT WITH CENTRE DISTANCE 3000 MM: 9.3 T, CONTROLLED TAILSTOCK
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 16.630 €
Ubicación: Land-: 165 mm<br/>: 400 mm<br/>: 190 mm<br/>: 440 mm<br/>: 200 mm<br/>: 750 mm<br/>: . 5 nr<br/>: 32 mm<br/>: 4,5 mk<br/>: 2,2 kw<br/>: 150 mm<br/>: 95 mm<br/>: 40 mm<br/>: 3 mk<br/>: 100 mm<br/>: 770 kg<br/>driven by variable speed control (2 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 160 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/>   turning length 1.000 mm ? 17.450,-   <br/><br/>center height: 165 mm<br/>swing over bed: 400 mm<br/>swing over cross slide: 190 mm<br/>swing in gap: 440 mm<br/>width of bed: 200 mm<br/>distance between centers: 750 mm<br/>spindle nose / din55027: no. 5<br/>spindle bore: 32 mm<br/>spindle taper: mt 4,5<br/>spindle speeds (infinitely variable in 2 subranges): 85 - 405, 470 - 2.200 r/min<br/>main motor power: 2,2 kw<br/>number of feeds: 48<br/>longitudinal feed range: 0,006 - 1,77 mm/r<br/>cross feed range: 0,003 - 0,885 mm/r<br/>number of threads:<br/>metric thread range (48): 0,1 - 285 mm<br/>inch thread rangel (53): 75 - 2,5 tpi<br/>module thread range (19): 0,1 - 1,75<br/>dp thread range (19): 70 - 4<br/>cross slide travel: 150 mm<br/>top slide travel: 95 mm<br/>tailstock quill diameter: 40 mm<br/>tailstock quill taper: mk 3<br/>tailstock travel: 100 mm<br/>weight approx.: 770 kg<br/><br/><br/><br/> : 165 MM
: 400 MM
: 190 MM
: 440 MM
: 200 MM
: 750 MM
: . 5 NR
: 32 MM
: 4,5 MK
: 2,2 KW
: 150 MM
: 95 MM
: 40 MM
: 3 MK
: 100 MM
: 770 KG
DRIVEN BY VARIABLE SPEED CONTROL (2 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 160 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:

TURNING LENGTH 1.000 MM ? 17.450,-

CENTER HEIGHT: 165 MM
SWING OVER BED: 400 MM
SWING OVER CROSS SLIDE: 190 MM
SWING IN GAP: 440 MM
WIDTH OF BED: 200 MM
DISTANCE BETWEEN CENTERS: 750 MM
SPINDLE NOSE / DIN55027: NO. 5
SPINDLE BORE: 32 MM
SPINDLE TAPER: MT 4,5
SPINDLE SPEEDS (INFINITELY VARIABLE IN 2 SUBRANGES): 85 - 405, 470 - 2.200 R/MIN
MAIN MOTOR POWER: 2,2 KW
NUMBER OF FEEDS: 48
LONGITUDINAL FEED RANGE: 0,006 - 1,77 MM/R
CROSS FEED RANGE: 0,003 - 0,885 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (48): 0,1 - 285 MM
INCH THREAD RANGEL (53): 75 - 2,5 TPI
MODULE THREAD RANGE (19): 0,1 - 1,75
DP THREAD RANGE (19): 70 - 4
CROSS SLIDE TRAVEL: 150 MM
TOP SLIDE TRAVEL: 95 MM
TAILSTOCK QUILL DIAMETER: 40 MM
TAILSTOCK QUILL TAPER: MK 3
TAILSTOCK TRAVEL: 100 MM
WEIGHT APPROX.: 770 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc - control siemens
tip height                                         410 mm
swing over bed                                     890 mm
swing over cross slide                             490 mm
bed width                                          700 mm
top width 1,500 mm, 3.000 mm, 4,000 mm, 5,000 mm, 6,000 mm
spindle hole                                       155 mm
speed ranges                          2-180 rpm, 8-700 rpm,
maximum torque at main spindle                   5,000 nm
rapid traverse of x - and z - axis                   8 m / min, 
cross travel of carriage                           525 mm
turret fabr. duplomatic with eight positions
the main spindle of                                 30 kw
diameter of tailstock quill                        125 mm, 
maximum stroke of the tailstock sleeve             250 mm
weight machine with a top width of 3000 mm           8.8 t
powered tailstock CNC - CONTROL SIEMENS TIP HEIGHT 410 MM SWING OVER BED 890 MM SWING OVER CROSS SLIDE 490 MM BED WIDTH 700 MM TOP WIDTH 1,500 MM, 3.000 MM, 4,000 MM, 5,000 MM, 6,000 MM SPINDLE HOLE 155 MM SPEED RANGES 2-180 RPM, 8-700 RPM, MAXIMUM TORQUE AT MAIN SPINDLE 5,000 NM RAPID TRAVERSE OF X - AND Z - AXIS 8 M / MIN, CROSS TRAVEL OF CARRIAGE 525 MM TURRET FABR. DUPLOMATIC WITH EIGHT POSITIONS THE MAIN SPINDLE OF 30 KW DIAMETER OF TAILSTOCK QUILL 125 MM, MAXIMUM STROKE OF THE TAILSTOCK SLEEVE 250 MM WEIGHT MACHINE WITH A TOP WIDTH OF 3000 MM 8.8 T POWERED TAILSTOCK
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 86.000 €
Ubicación: Land-: 400 mm<br/>: 890 mm<br/>: 490 mm<br/>: 1.050 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 30 kw<br/>: 525 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 7.500 kg<br/>driven by variable speed control (4 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/><br/><br/>   turning length 1.500 mm  ? 69.050,-   turning length 3.000 mm  ? 75.400,-   turning length 5.000 mm  ? 91.370,-   turning length 6.000 mm  ? 108.890,-   <br/><br/>entre height: 400 mm<br/>swing over bed: 890 mm<br/>swing over cross slide: 490 mm<br/>swing in gap: 1.050 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm<br/>main motor power: 30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 - 38,9 mm/r<br/>cross feed range: 0,016 - 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 	260 mm<br/>weight approx.: 7.500 kg<br/><br/><br/><br/> : 400 MM
: 890 MM
: 490 MM
: 1.050 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 30 KW
: 525 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 7.500 KG
DRIVEN BY VARIABLE SPEED CONTROL (4 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)


TURNING LENGTH 1.500 MM  ? 69.050,- TURNING LENGTH 3.000 MM  ? 75.400,- TURNING LENGTH 5.000 MM  ? 91.370,- TURNING LENGTH 6.000 MM  ? 108.890,-

ENTRE HEIGHT: 400 MM
SWING OVER BED: 890 MM
SWING OVER CROSS SLIDE: 490 MM
SWING IN GAP: 1.050 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (INFINITELY VARIABLE IN 4 SUBRANGES): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 RPM
MAIN MOTOR POWER: 30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 - 38,9 MM/R
CROSS FEED RANGE: 0,016 - 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 7.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc lathe with flat bed guides<br/>  exhibition machine with warranty available<br/>  ----------------------------------------------------------------------------<br/>  <br/>  circulating bed - slide.   580 mm<br/>  circulation over cross slide - slide.  400 mm<br/>  top width 2000 mm<br/>  bed width 400 mm<br/>  -------------------------------------------------------------------------<br/>  spindle nose din 55027 8<br/>  spindle bore 72 mm<br/>  max torque spindle 1120 nm<br/>  stepless speed control<br/>  3-speed motor<br/>  total speed range 25-2000 rpm<br/>  <br/>  -cnc control siemens 828 d with shop turn - 3-d simulation<br/>  -8 x turret duplomatic vdi 30<br/>  -power chuck slide. 250 mm<br/>  -hydraulic adjustment of the tailstock quill CNC LATHE WITH FLAT BED GUIDES
EXHIBITION MACHINE WITH WARRANTY AVAILABLE
----------------------------------------------------------------------------

CIRCULATING BED - SLIDE. 580 MM
CIRCULATION OVER CROSS SLIDE - SLIDE. 400 MM
TOP WIDTH 2000 MM
BED WIDTH 400 MM
-------------------------------------------------------------------------
SPINDLE NOSE DIN 55027 8
SPINDLE BORE 72 MM
MAX TORQUE SPINDLE 1120 NM
STEPLESS SPEED CONTROL
3-SPEED MOTOR
TOTAL SPEED RANGE 25-2000 RPM

-CNC CONTROL SIEMENS 828 D WITH SHOP TURN - 3-D SIMULATION
-8 X TURRET DUPLOMATIC VDI 30
-POWER CHUCK SLIDE. 250 MM
-HYDRAULIC ADJUSTMENT OF THE TAILSTOCK QUILL
Vendedor: MSI Elmar Reith
Año de construcción: usado
Precio: 62.440 €
Ubicación: Land-: 430 mm<br/>: 860 mm<br/>: 620 mm<br/>: 1.050 mm<br/>: 560 mm<br/>: 1.500 mm<br/>: . 11 nr<br/>: 132 mm<br/>: 140 m<br/>: 15 kw<br/>: 435 mm<br/>: 150 mm<br/>: 105 mm<br/>: 6 mk<br/>: 225 mm<br/>: 4.650 kg<br/>driven by variable speed control (3 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra type multifix with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3295/din6350, Ø 400 mm<br/>spindle dead center<br/>main motor with frequency invertor<br/>four way rapid traverse device<br/>foot pedal brake<br/>longitudinal stop for 1 position<br/>steady and following rest<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>tailstock quill reducer<br/>mechanized movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/> <br/>   turning length 1.500 mm ? 52.210,-   turning length 2.000 mm ? 54.390,-   turning length 4.000 mm ? 68.730,-   turning length 5.000 mm ? 77.860,-   turning length 6.000 mm ? 87.640,-   <br/><br/>centre height: 430 mm<br/>swing over bed: 860 mm<br/>swing over cross slide: 620 mm<br/>swing in gap: 1.050 mm<br/>width of bed: 560 mm<br/>distance between centers: 	1.500 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 132 mm<br/>spindle taper: m 140<br/>spindle speeds (infinitely variable in 3 subranges): 7 - 42, 28 - 170, 165 - 1.015 rpm<br/>main motor power: 15 kw<br/>number of feeds: 150<br/>longitudinal feed range: 0,039 - 18 mm/r<br/>cross feed range: 0,02 - 9 mm/r<br/>number of threads: 	<br/>metric thread range (76): 0,5 - 180 mm<br/>inch thread rangel (76): 60 - 1/6 tpi<br/>module thread range (76):  0,125 - 45<br/>dp thread range (76): 240 - 2/3<br/>cross slide travel: 435 mm<br/>top slide travel: 150 mm<br/>tailstock quill diameter: 105 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 	225 mm<br/>weight approx.: 4.650 kg<br/><br/><br/><br/> : 430 MM
: 860 MM
: 620 MM
: 1.050 MM
: 560 MM
: 1.500 MM
: . 11 NR
: 132 MM
: 140 M
: 15 KW
: 435 MM
: 150 MM
: 105 MM
: 6 MK
: 225 MM
: 4.650 KG
DRIVEN BY VARIABLE SPEED CONTROL (3 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3295/DIN6350, Ø 400 MM
SPINDLE DEAD CENTER
MAIN MOTOR WITH FREQUENCY INVERTOR
FOUR WAY RAPID TRAVERSE DEVICE
FOOT PEDAL BRAKE
LONGITUDINAL STOP FOR 1 POSITION
STEADY AND FOLLOWING REST
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
TAILSTOCK QUILL REDUCER
MECHANIZED MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:

 
TURNING LENGTH 1.500 MM ? 52.210,- TURNING LENGTH 2.000 MM ? 54.390,- TURNING LENGTH 4.000 MM ? 68.730,- TURNING LENGTH 5.000 MM ? 77.860,- TURNING LENGTH 6.000 MM ? 87.640,-

CENTRE HEIGHT: 430 MM
SWING OVER BED: 860 MM
SWING OVER CROSS SLIDE: 620 MM
SWING IN GAP: 1.050 MM
WIDTH OF BED: 560 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 132 MM
SPINDLE TAPER: M 140
SPINDLE SPEEDS (INFINITELY VARIABLE IN 3 SUBRANGES): 7 - 42, 28 - 170, 165 - 1.015 RPM
MAIN MOTOR POWER: 15 KW
NUMBER OF FEEDS: 150
LONGITUDINAL FEED RANGE: 0,039 - 18 MM/R
CROSS FEED RANGE: 0,02 - 9 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (76): 0,5 - 180 MM
INCH THREAD RANGEL (76): 60 - 1/6 TPI
MODULE THREAD RANGE (76): 0,125 - 45
DP THREAD RANGE (76): 240 - 2/3
CROSS SLIDE TRAVEL: 435 MM
TOP SLIDE TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 105 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 225 MM
WEIGHT APPROX.: 4.650 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-make: zmm
model: c13mb
condition: used
machine type: lathe 
location of machine: bulgaria 
control: manual 
max spindle speed: 1000rpm 
spindle bore size: 103mm 
service details: no history 
is the equipment viewable under power? yes

machine details
centre lathe zmm c13mb, capacity dxl 800x8000 mm.

machine is in working condition, visible under power.  MAKE: ZMM MODEL: C13MB CONDITION: USED MACHINE TYPE: LATHE LOCATION OF MACHINE: BULGARIA CONTROL: MANUAL MAX SPINDLE SPEED: 1000RPM SPINDLE BORE SIZE: 103MM SERVICE DETAILS: NO HISTORY IS THE EQUIPMENT VIEWABLE UNDER POWER? YES MACHINE DETAILS CENTRE LATHE ZMM C13MB, CAPACITY DXL 800X8000 MM. MACHINE IS IN WORKING CONDITION, VISIBLE UNDER POWER.
Vendedor: CNC Management Ltd
Año de construcción: usado
Precio: 99.570 €
Ubicación: Land-: 500 mm<br/>: 1.090 mm<br/>: 690 mm<br/>: 1.250 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 30 kw<br/>: 525 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 8.050 kg<br/>driven by variable speed control (4 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm  ? 77.250,-   turning length 3.000 mm  ? 83.600,-   turning length 4.000 mm  ? 94.200,-   turning length 6.000 mm  ? 117.090,-   <br/><br/>entre height: 500 mm<br/>swing over bed: 1.090 mm<br/>swing over cross slide: 690 mm<br/>swing in gap: 1.250 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm<br/>main motor power: 30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 - 38,9 mm/r<br/>cross feed range: 0,016 - 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 260 mm<br/>weight approx.: 8.050 kg<br/><br/><br/><br/> : 500 MM
: 1.090 MM
: 690 MM
: 1.250 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 30 KW
: 525 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 8.050 KG
DRIVEN BY VARIABLE SPEED CONTROL (4 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM  ? 77.250,- TURNING LENGTH 3.000 MM  ? 83.600,- TURNING LENGTH 4.000 MM  ? 94.200,- TURNING LENGTH 6.000 MM  ? 117.090,-

ENTRE HEIGHT: 500 MM
SWING OVER BED: 1.090 MM
SWING OVER CROSS SLIDE: 690 MM
SWING IN GAP: 1.250 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (INFINITELY VARIABLE IN 4 SUBRANGES): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 RPM
MAIN MOTOR POWER: 30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 - 38,9 MM/R
CROSS FEED RANGE: 0,016 - 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 8.050 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-model: caterpillar 12cm32 
built year: 2004
rpm: 750
engine kw: 5640
serial no: 34072
alternator: leroy somer
kva: 6821
hz: 50
fuel: hfo
working hours: 60,000

here is link to pictures
abcs://drive.google.com/open?id=1fkgaye8mlfclkjuhzmmk7bpn8yp_7-bd

location is china  MODEL: CATERPILLAR 12CM32 BUILT YEAR: 2004 RPM: 750 ENGINE KW: 5640 SERIAL NO: 34072 ALTERNATOR: LEROY SOMER KVA: 6821 HZ: 50 FUEL: HFO WORKING HOURS: 60,000 HERE IS LINK TO PICTURES ABCS://DRIVE.GOOGLE.COM/OPEN?ID=1FKGAYE8MLFCLKJUHZMMK7BPN8YP_7-BD LOCATION IS CHINA
Vendedor: Heeyas Limited London
Año de construcción: usado
Precio: 121.450 €
Ubicación: Land-: 625 mm<br/>: 1.320 mm<br/>: 940 mm<br/>: 1.500 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 30 kw<br/>: 685 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 8.550 kg<br/>driven by variable speed control (4 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm ? 81.910,-   turning length 3.000 mm ? 87.960,-   turning length 4.000 mm  ? 98.660,-    turning length 5.000 mm ? 103.930,-   <br/><br/><br/><br/>entre height: 625 mm<br/>swing over bed: 1.320 mm<br/>swing over cross slide: 940 mm<br/>swing in gap: 1.500 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm<br/>main motor power: 30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 - 38,9 mm/r<br/>cross feed range: 0,016 - 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 260 mm<br/>weight approx.: 8.550 kg<br/><br/><br/><br/> : 625 MM
: 1.320 MM
: 940 MM
: 1.500 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 30 KW
: 685 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 8.550 KG
DRIVEN BY VARIABLE SPEED CONTROL (4 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)
FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM ? 81.910,- TURNING LENGTH 3.000 MM ? 87.960,- TURNING LENGTH 4.000 MM ? 98.660,- TURNING LENGTH 5.000 MM ? 103.930,-



ENTRE HEIGHT: 625 MM
SWING OVER BED: 1.320 MM
SWING OVER CROSS SLIDE: 940 MM
SWING IN GAP: 1.500 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (INFINITELY VARIABLE IN 4 SUBRANGES): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 RPM
MAIN MOTOR POWER: 30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 - 38,9 MM/R
CROSS FEED RANGE: 0,016 - 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 8.550 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-universal lathe bulmak zmm c13 mb
distance between centers 2000 mm
swing over bed 800 mm
swing over cross slide 540 mm
spindle speed 8-1000 rpm
spindle hole 103 mm
range of metric threads 0,5- 240 mm
range of imperial threads- rounds /1 UNIVERSAL LATHE BULMAK ZMM C13 MB DISTANCE BETWEEN CENTERS 2000 MM SWING OVER BED 800 MM SWING OVER CROSS SLIDE 540 MM SPINDLE SPEED 8-1000 RPM SPINDLE HOLE 103 MM RANGE OF METRIC THREADS 0,5- 240 MM RANGE OF IMPERIAL THREADS- ROUNDS /1" - 60-1/8 MOTOR 13 KW HARDENED SLIDES FACEPLATE 760 MM LIVE BACK CENTER 4-JAW CHUCK 400 MM, CZECH ORIGIN 3-JAW CHUCK 315 MM
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Precio: 32.420 €
Ubicación: Land-: 300 mm<br/>: 600 mm<br/>: 400 mm<br/>: 800 mm<br/>: 400 mm<br/>: 2.000 mm<br/>: . 8 nr<br/>: 80 mm<br/>: 90 m<br/>: 7,5 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 3.100 kg<br/>driven by conventional transmission<br/>3-axes digital readout<br/>quick change toolpost amestra type multifix c with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3295/din6350, Ø 250 mm<br/>following rest (20 - 200 mm)<br/>steady rest (20 - 200 mm) <br/>spindle dead center<br/>four way rapid traverse device<br/>foot pedal brake<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>further turning lengths:<br/><br/><br/>   turning length 1.000 mm on request<br/>   turning length 1.500 mm on request   turning length 3.000 mm on request   turning length 4.000 mm on request   turning length 5.000 mm on request   <br/><br/><br/><br/>centre height: 300 mm<br/>swing over bed: 600 mm<br/>swing over cross slide: 400 mm<br/>swing in gap: 800 mm<br/>width of bed: 400 mm<br/>distance between centers: 2.000 mm<br/>spindle nose / din55027: no. 8<br/>spindlebore: 80 mm<br/>spindle taper: m 90<br/>spindle speeds (16): 11,5 - 2.000 rpm<br/>main motor power: 7,5 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,02 - 12 mm/r<br/>cross feed range: 0,01 - 6 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,25 - 120 mm<br/>inch thread rangel (80): 120 - 1/4 tpi<br/>module thread range (80): 0,0625 - 30<br/>dp thread range (80): 480 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 3.100 kg<br/><br/><br/><br/> : 300 MM
: 600 MM
: 400 MM
: 800 MM
: 400 MM
: 2.000 MM
: . 8 NR
: 80 MM
: 90 M
: 7,5 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 3.100 KG
DRIVEN BY CONVENTIONAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX C WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3295/DIN6350, Ø 250 MM
FOLLOWING REST (20 - 200 MM)
STEADY REST (20 - 200 MM) 
SPINDLE DEAD CENTER
FOUR WAY RAPID TRAVERSE DEVICE
FOOT PEDAL BRAKE
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
FURTHER TURNING LENGTHS:


TURNING LENGTH 1.000 MM ON REQUEST
TURNING LENGTH 1.500 MM ON REQUEST TURNING LENGTH 3.000 MM ON REQUEST TURNING LENGTH 4.000 MM ON REQUEST TURNING LENGTH 5.000 MM ON REQUEST



CENTRE HEIGHT: 300 MM
SWING OVER BED: 600 MM
SWING OVER CROSS SLIDE: 400 MM
SWING IN GAP: 800 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 2.000 MM
SPINDLE NOSE / DIN55027: NO. 8
SPINDLEBORE: 80 MM
SPINDLE TAPER: M 90
SPINDLE SPEEDS (16): 11,5 - 2.000 RPM
MAIN MOTOR POWER: 7,5 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,02 - 12 MM/R
CROSS FEED RANGE: 0,01 - 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,25 - 120 MM
INCH THREAD RANGEL (80): 120 - 1/4 TPI
MODULE THREAD RANGE (80): 0,0625 - 30
DP THREAD RANGE (80): 480 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 3.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-top height                                           625 mm
max. diameter over bed                              1320 mm
max. diameter over support                           940 mm
max. diameter in the crank                          1500 mm
guide width                                          700 mm
tip width                                           1500 mm
bar passage                                          155 mm
spindle mount                                  din 55027 15
internal taper of spindle bore                       160
spindle speeds                                        24
speed ??range                                     5 - 1000 rpm
power of the main engine                              18.5 kw, optionally 30 kw
number of feeds                                      160
longitudinal feeds                            0.032 - 38.9 mm / rev
cross feeds                                   0,016 - 19,45 mm / rev
number of threads                                     80
metric threads                                 0.5 - 480 mm 
inch thread                                    60 - 1/16 tpi
module thread module                         0,125 - 120
dp thread                                   dp 240 - 1/4
transverse path of the support                       685 mm
longitudinal path of the support                     270 mm
pinole diameter                                      125 mm
sleeve mount                                        mk 6
quill stroke                                         250 mm
machine weight about                                   9.5 t

accessories: according to agreement, for an additional charge digital display, 
             faceplate 1000 mm, three-jaw chuck 500 mm, bezel, multifix TOP HEIGHT 625 MM MAX. DIAMETER OVER BED 1320 MM MAX. DIAMETER OVER SUPPORT 940 MM MAX. DIAMETER IN THE CRANK 1500 MM GUIDE WIDTH 700 MM TIP WIDTH 1500 MM BAR PASSAGE 155 MM SPINDLE MOUNT DIN 55027 15 INTERNAL TAPER OF SPINDLE BORE 160 SPINDLE SPEEDS 24 SPEED ??RANGE 5 - 1000 RPM POWER OF THE MAIN ENGINE 18.5 KW, OPTIONALLY 30 KW NUMBER OF FEEDS 160 LONGITUDINAL FEEDS 0.032 - 38.9 MM / REV CROSS FEEDS 0,016 - 19,45 MM / REV NUMBER OF THREADS 80 METRIC THREADS 0.5 - 480 MM INCH THREAD 60 - 1/16 TPI MODULE THREAD MODULE 0,125 - 120 DP THREAD DP 240 - 1/4 TRANSVERSE PATH OF THE SUPPORT 685 MM LONGITUDINAL PATH OF THE SUPPORT 270 MM PINOLE DIAMETER 125 MM SLEEVE MOUNT MK 6 QUILL STROKE 250 MM MACHINE WEIGHT ABOUT 9.5 T ACCESSORIES: ACCORDING TO AGREEMENT, FOR AN ADDITIONAL CHARGE DIGITAL DISPLAY, FACEPLATE 1000 MM, THREE-JAW CHUCK 500 MM, BEZEL, MULTIFIX "D" U. A.
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 1320 mm<br/>turning diameter over slide rest: 940 mm<br/>turning length: 3000 mm<br/>center height over bed: 625 mm<br/>turning diameter in the gap: 1500 mm<br/>centre distance: 3000 mm<br/>bed width: 700 mm<br/>spindle bore: 155 mm<br/>spindle taper: kk 15 din 55027<br/>turning speed range: 5 - 1000 u/min<br/>power requirement: 22 kw<br/>3-jaw-chuck diameter: 630 mm<br/>quick change toolholder: 4 fach stahlhalter <br/>taper in tailstock-quill: mk 6 <br/>dia. of quill: 125 mm<br/>quill stroke: 260 mm<br/>voltage: 400 v<br/>total power requirement: 30 kw<br/>weight of the machine ca.: 8,5 t<br/>dimensions of the machine ca.: 5,25 x 2,05 x 1,95 m<br/>- fabr.no.:  36937<br/>- rapid traverse<br/>- electr. adjustable tail stock<br/> <br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 1320 MM
TURNING DIAMETER OVER SLIDE REST: 940 MM
TURNING LENGTH: 3000 MM
CENTER HEIGHT OVER BED: 625 MM
TURNING DIAMETER IN THE GAP: 1500 MM
CENTRE DISTANCE: 3000 MM
BED WIDTH: 700 MM
SPINDLE BORE: 155 MM
SPINDLE TAPER: KK 15 DIN 55027
TURNING SPEED RANGE: 5 - 1000 U/MIN
POWER REQUIREMENT: 22 KW
3-JAW-CHUCK DIAMETER: 630 MM
QUICK CHANGE TOOLHOLDER: 4 FACH STAHLHALTER
TAPER IN TAILSTOCK-QUILL: MK 6
DIA. OF QUILL: 125 MM
QUILL STROKE: 260 MM
VOLTAGE: 400 V
TOTAL POWER REQUIREMENT: 30 KW
WEIGHT OF THE MACHINE CA.: 8,5 T
DIMENSIONS OF THE MACHINE CA.: 5,25 X 2,05 X 1,95 M
- FABR.NO.: 36937
- RAPID TRAVERSE
- ELECTR. ADJUSTABLE TAIL STOCK





Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-; new ; NEW
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 440 mm<br/>turning diameter over slide rest: 230 mm<br/>turning length: 1500 mm<br/>swing in gap: 620 mm<br/>bar material dia.: 70 mm<br/>spindle turning speed range: 11,2 - 2000 u/min<br/>feeds - longitudinal: 0,04 - 3 mm/u<br/>tailstock quill diameter: 75 mm<br/>tailstock quill stroke: 200 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 3,1 t<br/>dimensions of the machine ca.: 3,7 x 1,2 x 1,45 m<br/>* rapid traverse<br/>* toolpost<br/>* 3-jaw chuck make röhm duro 315<br/>* 2-axis d.r.o., make heidenhain<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 440 MM
TURNING DIAMETER OVER SLIDE REST: 230 MM
TURNING LENGTH: 1500 MM
SWING IN GAP: 620 MM
BAR MATERIAL DIA.: 70 MM
SPINDLE TURNING SPEED RANGE: 11,2 - 2000 U/MIN
FEEDS - LONGITUDINAL: 0,04 - 3 MM/U
TAILSTOCK QUILL DIAMETER: 75 MM
TAILSTOCK QUILL STROKE: 200 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 3,1 T
DIMENSIONS OF THE MACHINE CA.: 3,7 X 1,2 X 1,45 M
* RAPID TRAVERSE
* TOOLPOST
* 3-JAW CHUCK MAKE RöHM DURO 315
* 2-AXIS D.R.O., MAKE HEIDENHAIN




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-spitzenhöhe                                 400 mm
umlaufdurchmesser über bett                 800 mm
umlaufdurchmesser über planschlitten        560 mm
max. drehdurchmesser in der kröpfung        990 mm
bettbreite                                  560 mm
spitzenweiten    1.500, 2.000 mm, 3.000 mm, 4.000 mm, 5.000 mm, 6.000 mm
spindelbohrung                              260 mm
drehzahlbereiche                              8 – 400 u/min
antriebsleistung der hauptspindel            11 kw
maschinengewicht bei spitzenweite 2.000 mm  etwa 6,0 t 
reitstock kegel                              mk 6
 SPITZENHöHE 400 MM UMLAUFDURCHMESSER üBER BETT 800 MM UMLAUFDURCHMESSER üBER PLANSCHLITTEN 560 MM MAX. DREHDURCHMESSER IN DER KRöPFUNG 990 MM BETTBREITE 560 MM SPITZENWEITEN 1.500, 2.000 MM, 3.000 MM, 4.000 MM, 5.000 MM, 6.000 MM SPINDELBOHRUNG 260 MM DREHZAHLBEREICHE 8 – 400 U/MIN ANTRIEBSLEISTUNG DER HAUPTSPINDEL 11 KW MASCHINENGEWICHT BEI SPITZENWEITE 2.000 MM ETWA 6,0 T REITSTOCK KEGEL MK 6
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-de Germany, 46325 Borken-Burlo
Vendedor: Peter Jüttermann Werkzeugmaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)