Curvadoras motorizadas en redondo para chapa (76)

Oferta 26165 Dados técnicos - Dois rolos acionados, cada rolo ajustável hidraulicamente - Para flexão e rolamento cónico - Funcionamento de painel de controlo separado, com visualização digital do valor real - e operação manual - Largura máxima de trabalho 1300 mm - Espessura máxima da folha a 400 N/mm² sem flexão - Com um diâmetro de flexão de 370 mm, 30 mm no interior - Com flexão a um diâmetro de flexão de 370 mm, interior de 25 mm - sem curvatura com um diâmetro de flexão de 380 mm no interior e - Largura de 370 mm 45 mm - Diâmetro dos rolos superiores cada 300 mm - Diâmetro do rolo lateral cada 310 mm - Velocidade de trabalho 4,5 m/min - Potência de 400 V / 30 kW - Espaço necessário W 5800 x H 1900 x D 2200 mm - Peso: 8500 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 24500 €: 470.4 €: 1550 mm: 4.5 mm: 4.5 mm: 3.5 mm: 4.5 mm: 3.5 mm: 3.5 mm: 2.5 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3300 mm: 1150 mm: 1110 mm: 2370 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1030 mm, 1 mm

móvel, com inserções de arame, ranhura de desconto e contraeixo engrenado A máquina é reparada, verificada, limpa por um profissional e, em seguida, é totalmente funcional. O teste é realizado. Largura da folha: 1030 mm Espessura da folha: 1,0 mm Cor: antracite Peso da máquina: 200 kg Dimensões: 1600 x 700 x 1300 mm Diâmetro do rolo: 56 mm Número da máquina: 1420-419629

: neu : 2024 : 9722 : prompt, Zwischenverkauf v : Türkei : 17300 €: 332.16 €: 1 : 2050 mm: 3 mm: 130 mm: 3,5 m/min: 2.2 kW: 3200 mm: 750 mm: 1000 mm: 1500 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorHARDENED ROLLSmanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in GERMANOPTIONS (PRICES ON REQUEST):(time of delivery with options approx. 8 weeks)Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dados técnicos do calandra Lisse Z4-30 usado: Diâmetro superior do rolo: 230 mm Diâmetro dos rolos inferiores: 170 mm Dimensões da máquina: 4800 x 1250 x 1300 (h) mm

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 18 mm: 18 mm: 12.1 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movem ...

Dados técnicos do calandra de placas hidráulicas Faccin HAV 3162 utilizado: Diâmetro superior do rolo: 620 mm Diâmetro dos rolos laterais: 550 mm Dimensões da máquina: 8600 x 3500 x 3700 (h) mm peso: 90.000 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 €: 481.32 €: 1050 mm: 2.5 mm: 2.5 mm: 2 mm: 90 mm: 4,5 m/min: 2.2 kW: 2250 mm: 1000 mm: 1500 mm: 900 kgFOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE)4 rollsNC control with touchscreenTop roll driven by hydromotor and plantary gearboxHydraulic drop endMobile control panelHardened rollsOperating manual in English or GermanOPTION:Feeding table price on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC de alta qualidade – máquina de dobragem de chapas de precisão controlada com cálculo automático de sequência de dobragem – automático, CNC – pré-dobramento de dupla face controlada – dispositivo de dobragem cónica Diâmetro do rolo 350 mm Menor diâmetro de 1,1 x do diâmetro do rolo = 385 mm Comprimento máximo de flexão 3.000 mm Desempenho nominal de pré-flexão ao longo de todo o comprimento de flexão a 5 x D = 18 mm para chapa de aço/ST40 Desempenho de flexão nominal ao longo de todo o comprimento de flexão a 5 x D = 22 mm de aço de chapa/ST40 Potência de unidade 22 kW Peso 13.500 kg. Três rolos hidráulicos (um motor hidráulico por rolo) - Os rolos correm em rolamentos lisos de bronze Regulação do sub-rolo linear hidráulico Varas de pistão cromadas duras Rolos endurecidos e moídos Validação do laser PILZ® BECKHOFF® CNC –  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7000 €: 135.1 €: 1550 mm: 2 mm: 90 mm: 6 m/min: 1.5 kW: 2130 mm: 700 mm: 1200 mm: 545 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHOPTIONS:powered back roll EUR 1.000,-digital readout EUR 1.100,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC de alta qualidade – máquina de dobragem redonda de chapas de precisão controlada com cálculo automático de sequência de dobragem – CNC automático – pré-dobramento de dupla face controlada – dispositivo de dobragem cónica, três rolos hidráulicos (um motor hidráulico por rolo), ajuste de sub-rolo linear hidráulico – varas de pistão cromadas duras – rolos endurecidos e terrestres - PILZ® proteção contra laser - BECKHOFF® CNC – controlo com tecnologia Ethernet e grande ecrã tátil - DANFOSS® hidráulica de precisão – sistema de lubrificação central Comprimento máximo de flexão 2.000 mm Diâmetro do rolo 170 mm Menor diâmetro de mente = 1,1 x o diâmetro do rolo Os rolos correm em rolamentos lisos de bronze. Desempenho nominal de pré-flexão ao longo de todo o comprimento de flexão a 5 x D = 5 mm para chapa de aço/ST40 Desempenho de flex ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13200 €: 253.44 €: 1270 mm: 5 mm: 140 mm: 3,5 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1350 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC de alta qualidade – máquina de dobragem de chapas de precisão controlada com cálculo automático da sequência de dobragem. - CNC automático - pré-flexão de duplas laterais controlada - Dispositivo de flexão cónica - três rolos hidráulicos (um motor hidráulico por rolo) - ajuste de sub-rolo linear hidráulico - varas de pistão cromadas duras - rolos endurecidos e moídos - PROTEÇÃO ® LASER PILZ - CONTROLO CNC ® BECKHOFF com tecnologia Ethernet e grande ecrã táctil - HIDráulica de precisão ® DANFOSS - Sistema central de lubrificação Diâmetro do rolo 235 mm Menor diâmetro de 1,1 x do diâmetro do rolo Os rolos correm em rolamentos lisos de bronze. Comprimento máximo de flexão 3.000 mm Desempenho nominal de pré-flexão ao longo de todo o comprimento de flexão a 5 x D = 8 mm para chapa de aço/ST40 Desempenho nominal de flexão ao longo de ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 €: 282.24 €: 1550 mm: 4 mm: 140 mm: 3,5 m/min: 2.2 kW: 2700 mm: 750 mm: 1000 mm: 1420 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC de alta qualidade – máquina de dobragem de chapas de precisão controlada com cálculo automático de sequência de dobragem - CNC automático - pré-flexão de duplas laterais controlada - Dispositivo de flexão cónica - três rolos hidráulicos (um motor hidráulico por rolo) - ajuste de sub-rolo linear hidráulico - varas de pistão cromadas duras - rolos endurecidos e moídos - PROTEÇÃO ® LASER PILZ - CONTROLO CNC ® BECKHOFF com tecnologia Ethernet e grande ecrã táctil - HIDráulica de precisão ® DANFOSS - Sistema central de lubrificação

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 €: 236.16 €: 1270 mm: 4 mm: 120 mm: 3 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1110 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Máquina de dobragem de placa mecânica Goyar 3C-25/20. Comprimento de flexão: 2000mm. Capacidade de flexão: 25mm. Diâmetro do cilindro superior: 285mm. Diâmetro dos cilindros inferiores: 235mm. Potência motora principal: 20cv. Velocidade de flexão: 5 mpm. Peso: 5500Kgs.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10500 €: 201.6 €: 1050 mm: 4 mm: 110 mm: 2.2 kW: 1100 mm: 750 mm: 1000 mm: 990 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 €: 226.56 €: 1050 mm: 5 mm: 130 mm: 3,5 m/min: 2.2 kW: 2200 mm: 750 mm: 1000 mm: 1200 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 134000 €: 2532.6 €: 3100 mm: 25 mm: 25 mm: 20 mm: 20 mm: 20 mm: 16 mm: 360 mm: 360 mm: 270 mm: 60 mm: 1510 mm: 22 kW: 5560 mm: 2060 mm: 2050 mm: 16750 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 €: 530.98 €: 3030 mm: 4 mm: 4 mm: 2 mm: 180 mm: 4 kW: 4600 mm: 1120 mm: 1020 mm: 4250 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9740 : prompt, Zwischenverkauf v : Türkei : 6500 €: 125.45 €: 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 €: 144.75 €: 1 : 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rollHARDENED ROLLStiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 €: 2107.35 €: 3100 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 6000 mm: 2200 mm: 1900 mm: 15000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm: 11 mm: 11 mm: 7 mm: 8 mm: 6.4 mm: 225 mm: 215 mm: 165 mm: 8 m/min: 3950 mm: 1200 mm: 1200 mm: 4450 kgHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 6 mm: 6 mm: 4 mm: 5 mm: 4.5 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement o ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 22 mm: 22 mm: 16 mm: 19 mm: 17 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13400 €: 257.28 €: 1550 mm: 3 mm: 110 mm: 3 m/min: 2.2 kW: 2700 mm: 750 mm: 1000 mm: 1200 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 €: 418.56 €: 1270 mm: 5 mm: 5 mm: 4 mm: 5 mm: 4 mm: 4 mm: 3 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3020 mm: 1150 mm: 1110 mm: 2150 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 95000 €: 1795.5 €: 3100 mm: 13 mm: 12 mm: 8 mm: 13 mm: 10 mm: 10 mm: 8 mm: 270 mm: 270 mm: 230 mm: 50 mm: 1155 mm: 15 kW: 5310 mm: 1660 mm: 1590 mm: 10050 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 €: 428.16 €: 1 : 1 : 2030 mm: 6 mm: 6 mm: 5 mm: 170 mm: 4 kW: 3600 mm: 1020 mm: 1120 mm: 2400 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 16 mm: 16 mm: 10 mm: 13 mm: 11 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 43000 €: 821.3 €: 2050 mm: 10 mm: 10 mm: 8 mm: 10 mm: 8 mm: 8 mm: 6 mm: 200 mm: 200 mm: 180 mm: 6 m/min: 3850 mm: 1350 mm: 1290 mm: 3750 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 €: 1948.59 €: 2550 mm: 25 mm: 25 mm: 20 mm: 20 mm: 16 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 5500 mm: 2000 mm: 1900 mm: 13000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 €: 98.43 €: 1050 mm: 2 mm: 75 mm: 1.5 kW: 1610 mm: 700 mm: 1160 mm: 385 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by ratchet leverlongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchuser manual in GERMAN or ENGLISHOPTION (PRICE ON REQUEST):hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 12 mm: 12 mm: 6.5 mm: 8 mm: 8 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 36300 €: 693.33 €: 2050 mm: 8 mm: 8 mm: 6 mm: 6 mm: 4 mm: 180 mm: 180 mm: 150 mm: 1,5 / 6 m/min: 5.5 kW: 4400 mm: 1150 mm: 1250 mm: 3790 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomme ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 38000 €: 725.8 €: 2050 mm: 8 mm: 8 mm: 6 mm: 8 mm: 6 mm: 6 mm: 4 mm: 180 mm: 180 mm: 150 mm: 5 m/min: 3850 mm: 1350 mm: 1290 mm: 3300 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 60600 €: 1145.34 €: 3100 mm: 10 mm: 10 mm: 8 mm: 8 mm: 6 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 5350 mm: 1600 mm: 1550 mm: 7685 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are reco ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 €: 630.3 €: 2530 mm: 6 mm: 6 mm: 4 mm: 190 mm: 5.5 kW: 4250 mm: 1200 mm: 1150 mm: 3750 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 €: 100.36 €: 1270 mm: 1.5 mm: 75 mm: 1.5 kW: 1830 mm: 700 mm: 1160 mm: 400 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by ratchet leverlongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchuser manual in GERMAN or ENGLISHOPTION (PRICE ON REQUEST):hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 35400 €: 676.14 €: 3030 mm: 6 mm: 6 mm: 4 mm: 220 mm: 5.5 kW: 4750 mm: 1200 mm: 1150 mm: 4920 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52700 €: 996.03 €: 2550 mm: 10 mm: 10 mm: 8 mm: 8 mm: 6 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 4800 mm: 1600 mm: 1470 mm: 6170 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recom ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62600 €: 1183.14 €: 2050 mm: 13 mm: 10 mm: 13 mm: 10 mm: 10 mm: 8 mm: 240 mm: 240 mm: 190 mm: 820 mm: 11 kW: 3830 mm: 1160 mm: 1200 mm: 5000 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 49900 €: 953.09 €: 2050 mm: 13 mm: 13 mm: 10 mm: 10 mm: 8 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 4300 mm: 1600 mm: 1470 mm: 5450 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are rec ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 €: 603.56 €: 2050 mm: 6 mm: 6 mm: 4 mm: 4 mm: 3 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 4250 mm: 960 mm: 1100 mm: 2800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recommende ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 27 mm: 27 mm: 18 mm: 23 mm: 20 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 20 mm: 20 mm: 12 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 8 mm: 8 mm: 4.9 mm: 6 mm: 6 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement o ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70300 €: 1328.67 €: 3100 mm: 8 mm: 8 mm: 6 mm: 6 mm: 5 mm: 240 mm: 240 mm: 190 mm: 825 mm: 11 kW: 4880 mm: 1160 mm: 1200 mm: 6450 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad wa ...