Diversos (52)

Serra de Kaltenbach Máquina de Perfuração de Colunas Alzmetall Máquina de soldar Kemppi Máquina de soldadura por pulso

A deposit of €3000.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveillance co ...

1. Capacidade: 2.000kg/batch 2. Material do corpo: Aço inoxidável 304 camada única 3. Tipo de Stirrer: placa de 3 camadas 4. Alimentação elétrica: 415V 5. Motor: 7.5HP x 4P x 415V x 50HZ, Motor de indução TECO, c/w Redutor de engrenagem helicoidal para serviço pesado 6. Revolução da velocidade: 0 a 120RPM com inversor

Auction-ID: A1-41995-143

Devido ao encerramento das ações, peço para vender o seguinte: 1x NC tabela rotativa 3x maxilares rotativo Compressor de refrigeração 1x 2x Separador de névoa de óleo Constante de corrente 3x Armário de potência 1x Máquina de ciclo rotativo 1x Alimentador de rebite 8x 1x Grande bomba de água 8x pés de medição 1x teste de binário Unidade de recarga climática 1x carro 1 x máquina de afinação dupla Misturador de tinta 1x, novo 1x unidade de sucção de gases de escape Tanque hidráulico 1x com bomba Sistema de arrefecimento 1x O preço é líquido. Visualização possível por marcação.

Auction-ID: A1-46480-2601

Estação de marcação móvel Marcação de peças metálicas - foi usada na Faurecia Máquina verificada - bem, pronta para ser usada

Auction-ID: A3-43525-11839

Vibratory dryers See pictures Tank outer diameter 1500 mm Container diameter/ container height 1500 / 500 mm Speed range 1500 rpm Operating voltage 380 V Drive power 18 kW Volume 300 litres Machine weight approx. 1.2 t Dimensions L x W x H 1.5 x 1.6 x 1.6 m Auction-ID: A7-46460-427

Auction-ID: A1-46480-2600

Lot consisting of: 1 - Specific machinery and systems 2 - Work vehicles 3 - Equipment 4 - Moulds 5b - Warehouse (raw materials) 5c - Warehouse (semi-components) 6 - Office furniture 7 - Electronic office machines Items sold in unverified status - Recommended viewing Auction-ID: A7-45958-2

According to photos, weight estimated Auction-ID: A1-45666-14

capacity: 300 kg, year of manufacture: 1998 Auction-ID: A7-46300-150

According to photos, weight estimated Auction-ID: A1-45666-29

According to photos, weight estimated Auction-ID: A1-45666-30

Nabertherm hardening furnace ; max. 850°C with digital measuring equipment ; suitable for heat treatment of metals; Voltage: 380 volts ; Power: 13 kW ; Inner width: 500 mm ; Inner height: 500 mm ; Inner Dimension Depth: 625 mm Auction-ID: A1-45170-39

Auction-ID: A1-45170-36

Auction-ID: A1-45170-94

Euromac 220/6 A.V. hydraulic notcher; variably adjustable with hydraulic control; suitable for precise cornering of steel; Voltage: 380 volts ; Capacity: 220 x 220 x 6 mm steel ; Hydraulically adjustable: yes ; Blade height adjustable: yes ; Foot control: yes ; Manual control: yes ; In neat condition; Auction-ID: A1-45170-14

Auction-ID: A1-45170-38

Auction-ID: A1-45170-80

Consisting of: various ISO 20 holders, Depo, precision holders Auction-ID: A1-45979-13

Measuring range length: 400 / 700 mm, Measuring range diameter: 400 mm, Max. tool weight: 60 kg, Travel X-axis: -50 to +200 mm. Equipped with monitor, keyboard and PC unit, Operating pressure: 5.5 – 6 bar. Includes: (1x) SK50 / HSK-A80 mount, (1x) base cabinet / workstation. Auction-ID: A1-45979-5

Power: 10Kva Auction-ID: A1-45979-8

Consisting of: various ISO 30 holders, Depo. Auction-ID: A1-45979-14

Consisting of: various ISO/HSK A80 holders, including Haimer, Seco, EPB, precision holders (G2.5 balanced). Auction-ID: A1-45979-11

Consisting of: various HSK A63 holders, (5x) Haimer, (2x) schluessler. Auction-ID: A1-45979-38

Without the exhaust pipes Auction-ID: A1-43429-51

Consisting of: various BT40 / ISO40 holders, including Haimer, Seco, EPB. Auction-ID: A1-45979-16

Suitable for crimping tools Ø 3 – 32 mm (h6), Version: Comfort NG with NG coil Equipped with: 3-fold ISO shrink holders and accessories, Power approximately: 13 kVA, Clamping time approx. 5 seconds, Compressed air required (approx. 2 bar, dry), Included: Haimer Speed Cooler, type: VWK 7/1S. Auction-ID: A1-45979-6

Various brands and models Auction-ID: A1-45979-20

Consisting of: various ISO 50 holders, Depo, precision holders Auction-ID: A1-45979-12

Wooden box with various machine tools and accessories, including cutters, gears, clamping equipment and various loose parts. Auction-ID: A1-45979-21

Auction-ID: A7-46302-1

Consisting of: various ISO/HSK A63 holders, collet holders, extensions and milling holders, including Haimer, Seco, EPB, (G2.5 balanced). Auction-ID: A1-45979-10

Without the exhaust pipes Auction-ID: A1-43429-47

Consisting of: various BT40 / ISO40 holders, including Haimer, Seco, EPB. Auction-ID: A1-45979-18

Consisting of: various BT30 / ISO30 holders. Auction-ID: A1-45979-17

Auction-ID: A1-45979-9

Consisting of: various HSK A63 holders, collet holders, extensions and milling holders, including Haimer, Seco, EPB Auction-ID: A1-45979-15

Power: 3400W, Including: EPB Cooling device, type: CH-3900 Brig, size: 430x470x340mm, serial number: 11-01275, 230 volts. Auction-ID: A1-45979-7

Arm length approximately: 150mm. Includes: (1x) steel table with wooden top, size: 1200x900mm. Auction-ID: A1-45979-105

This device is designed for engraving nameplates, jewelry, pendants, bracelets, watches, cutlery, etc.Simple and intuitive equipment for both professional use and beginners.The set includes additional cutters and a complete set of letters and characters. number of reduction ratios: 25,character reduction from 1/2 to 1/7,rotating pantograph arm,maximum vice opening: 140mm,vise rotation: 360 degrees,engraving area: 75mm x 200mm at a 2:1 ratio,copying table: 150mm x 405mm,cutter diameter: 3.17mm,Spindle equipped with a vernier micrometer for precise engraving depth adjustment. Increments of 0.025mm. Auction-ID: A7-45896-7

A deposit of €320.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Laser class 4Pulse duration min 10 nsWavelength 1064 nm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-14

A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The completefloor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveillance costs ...

To participate in the auction it is necessary to pay 8,890.00 euros, ask the contact person andrea.bruni@surplex.com for bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-2

To participate in the auction it is necessary to pay 5,400.00 euros, ask the contact person andrea.bruni@surplex.com for bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-3

To participate in the auction it is necessary to pay 14,000.00 euros, ask the contact person andrea.bruni@surplex.com for the bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-1

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-36

HABERLE HR 302 deburring machine ; suitable for pipes, pipes and conduits; equipped on a mobile chassis; Voltage: 380 volts ; Power: 0.88 / 1.32 kW ; Spindle speeds: 100 / 200 rpm ; Auction-ID: A1-45170-23