Máquinas dobladoras

sheet width: 2600 mmplate thickness: 10,0 mmpre-bending: 8,0 mmdiameter of upper rolls: 230 mmside roll diameter: 190 mmdiameter of lower rolls: 210 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5.560 kg.range L-W-H: 4.650x1.380x1.300 mmFurnishing:- hydraulic 4 roll bending machine- Conical bending device- Induction hardened rollers- Digital display for the two side rollers- mobile control panel- 2 speeds- hydraulic folding bearing- Operating instructions in German- CE mark / declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 13,0 mmpre-bending: 10,0 mmdiameter of upper rolls: 300 mmside roll diameter: 210 mmdiameter of lower rolls: 270 mmtotal power requirement: 11,0 kWFurnishing:- hydraulic 4 roll bending machine- Conical bending device- Induction hardened rollers- Digital display for the two side rollers- mobile control panel- 2 speeds- hydraulic folding bearing- CE mark / declaration of conformity- Required instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 m4-ROLL Hydraulic Plate Rolling MachineWorking length 3100 mmMaximum thickness Pre-bending 40 mmBending 50 mmYield Point: 240 N/mm2Number of rolls 4Motor Power 55 kWMin. diameter mm - Ø Top Roll Diameter x 3Top roll Ø 540 mmBottom roll Ø 510 mmSide roll Ø 440 mmLength 6700 mmHeight 3000 mmWidth 3000 mmWeight 40.000 kgWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelDual bending speedsElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls ...

AYEL-TECH ROUND BIEGEMASCHINE TIPO 1030 x 100 - Capaciteite 1030 x 3 mm - Rolo de diâmetro de 100 mm - Conisch walsen - Pathdraaibare bovenrol - Remmotor - Voetbediening - Noodstop - Peso 600 kg - 400V PREÇO É exclusivo do IVA DUTCHMACH Máquinas de metalomecânica ENSCHEDE - PAÍSES BAIXOs (3 km da fronteira alemã)

AYEL-TECH ROUND BIEGEMASCHINE TIPO 1270 x 130 - Capaciteite 1270 x 3 mm - Rolo de diâmetro de 100 mm - Conisch walsen - Pathdraaibare bovenrol - Remmotor - Voetbediening - Noodstop - Peso 650 kg - 400V PREÇO É exclusivo do IVA DUTCHMACH Máquinas de metalomecânica ENSCHEDE - PAÍSES BAIXOs (3 km da fronteira alemã)

AYEL-TECH ROUND BIEGEMASCHINE TIPO 3R HMD 1270 x 90 - Achterrol ajustável hidráulico - 3 rolos aangedreven - Uitlezing digital - Geharde rolando - Conisch walsen - Pathdraaibare bovenrol - Remmotor - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Máquinas de metalomecânica ENSCHEDE - PAÍSES BAIXOs (3 km da fronteira alemã)

AYEL-TECH ROUND BIEGEMASCHINE TIPO IR 1050 x 46 - Capaciteite 1050 x 0,8 mm - Conisch walsen - Pathdraaibare bovenrol - Remmotor - Voetbediening - Noodstop - 400V DUTCHMACH Máquinas de metalomecânica ENSCHEDE - PAÍSES BAIXOs (3 km da fronteira alemã)

AYEL-TECH ROUND BIEGEMASCHINE TIPO IRM 1270 X 140 - Capaciteite 1270 x 5 mm - Achterrol electricamente ajustável - Uitlezing digital - Geharde rolando - Conisch walsen - Pathdraaibare bovenrol - Remmotor - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Máquinas de metalomecânica ENSCHEDE - PAÍSES BAIXOs (3 km da fronteira alemã)

AYEL-TECH ROUND BIEGEMASCHINE TIPO PWE 1080 x 100 - Capaciteite 1080 x 3 mm - Rolo de diâmetro de 100 mm - Conisch walsen - Pathdraaibare bovenrol - Remmotor - Voetbediening - Noodstop - Peso 600 kg - 400V PREÇO É exclusivo do IVA DUTCHMACH Máquinas de metalomecânica ENSCHEDE - PAÍSES BAIXOs (3 km da fronteira alemã)

AYEL-TECH ROUND BIEGEMASCHINE TIPO RM 1050 x 90 - Capaciteite 1050 x 3 mm - Conisch walsen - Pathdraaibare bovenrol - Remmotor - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Máquinas de metalomecânica ENSCHEDE - PAÍSES BAIXOs (3 km da fronteira alemã)

AYEL-TECH ROUND BIEGEMASCHINE TIPO RM 1270 x 90 - Capaciteit e 1270 x 2,5 mm - Conisch walsen - Pathdraaibare bovenrol - Remmotor - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Máquinas de metalomecânica ENSCHEDE - PAÍSES BAIXOs (3 km da fronteira alemã)

Comprimento do rolo: 1250 mm Espessura da folha máx. 1,25 mm Diâmetro do rolo: 60 mm Comprimento: 1780 mm Profundidade: 550 mm Altura: 1030 mm Peso: aproximadamente 230 kg O preço é líquido, mais IVA, casa livre 1 endereço Alemanha (sem ilhas).

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,450 tdimensions of the machine ca.: 3830 x 1160 x 1180 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 24mm total power requirement: 45+22 kWweight of the machine ca.: 43 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 4mm total power requirement: 5,5 kWweight of the machine ca.: 2920 tdimensions of the machine ca.: 3600 x 970 x 1140mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6 total power requirement: 7,5 kWweight of the machine ca.: 4,340 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,570 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4260 x 1160 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 18,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4260 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD 0: 20mm (s) Ampullen/h0: mm0: mmtotal power requirement: 22 kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: 4260 x 1660 x 1590 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm (s) total power requirement: 30 kWweight of the machine ca.: 13950kg tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 30mm (S) total power requirement: 37 kWweight of the machine ca.: 15,3 tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13 total power requirement: 15 kWweight of the machine ca.: 8,84 tdimensions of the machine ca.: 4760 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 18,5 kWweight of the machine ca.: 9,6 tdimensions of the machine ca.: 4760 x 1660 x 1140mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 30 kWweight of the machine ca.: 15,15 tdimensions of the machine ca.: 5010 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6mm total power requirement: 11 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4880 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 9,7 tdimensions of the machine ca.: 5310 x 1660 x 1590 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 10mm total power requirement: 15 kWweight of the machine ca.: 10,6 tdimensions of the machine ca.: 5310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 22 kWweight of the machine ca.: 16,65 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 20mm total power requirement: 30 kWweight of the machine ca.: 18,3 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 37 kWweight of the machine ca.: 20,5 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 35mm total power requirement: 45+22 kWweight of the machine ca.: 35 tdimensions of the machine ca.: 5684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 40mm total power requirement: 2x37+30 kWweight of the machine ca.: 45 tdimensions of the machine ca.: 6085 x 2630 x 2787mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 50mm total power requirement: 45+45 kWweight of the machine ca.: 72 tdimensions of the machine ca.: 6370 x 3240 x 3660mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 14,1 tdimensions of the machine ca.: 6310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13mm total power requirement: 22 kWweight of the machine ca.: 21,3 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16 total power requirement: 37 kWweight of the machine ca.: 23,81 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 20mm total power requirement: 37+22 kWweight of the machine ca.: 39 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 70 mmpre-bending: roll diameter: 660 mmtotal power requirement: kWweight of the machine ca.: 63 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largura da folha: 1050 mmse de espessura: 1,50 mmrespes: 1050 mmrol de diam. toproll: 68,0 mmengine: manuell kWpeso: 280 kgrange L-W-H: 1930 x 700 x 1160 mm

Largura da chapa: 1270 mmse de espessura: 1,50 mmrúde: 1270 mmrm. toproll: 75,0 mmprodução de motor: manuell kWpelho: 330 kgrange L-W-H: 2150 x 700 x 1160 mm

sheet width: 1270 mmplate thickness: 2,5 mmroll length: 1270 mmroll diam. toproll: 90,0 mmengine output: 1,1 kWbending speed: 6,0 m/minweight: 520 kgFurnishing:- motor-driven asymmetrical 3-roll round bending machine- hardened rollers- manual folding warehouse for quick removal of the workpiece- Profile inlets i.d. Rollers- Double foot switch for R / L run and emergency stop button- Conical bending device- rear roller manually adjustable- electr. Safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largura da chapa: 1550 mmse de espessura: 2,0 mmrole: 1550 mmrol de rolo.veir L-W-H: 2580 x 700 x 1250 mmFurnishing:- máquina de dobragem redonda assimétrica manual de 3 rolos com unidade manual armazém dobrável manual- entrega manual d. rolo traseiro- Ranhuras de perfil: 4/6/9 mm

largura da folha: 1020 mmespessura da placa: 5 mmdiâmetro do rolo: 110 mmpeso da máquina ca.: 0,55 t

comprimento de curvatura: 1540 mm espessura da folha: aço 1,5 mm Diâmetro do rolo: 80 mm Forro do rolo traseiro motorizado com desligamento automático Rotação no sentido horário e anti-horário através do interruptor de pé 3 acionamentos de rolos Interruptor de tração do cabo de segurança Arredondamento cónico possível

Comprimento máximo de flexão: 2040 mm Espessura máxima da folha: aço de 1,25 mm Rotação no sentido horário e anti-horário através do interruptor de pé Acionamento por 3 rolos Interruptor de segurança Rodadas cônicas possíveis

Especificações: Comprimento do rolo 2040 mm Capacidade de flexão 6 mm a 450 N/mm² Capacidade de flexão aprox. 80% da capacidade de flexão Diâmetro superior do rolo 170 mm Diâmetro do rolo traseiro 170 mm Diâmetro inferior do rolo 165 mm

Description: for edgesweight approx.: 35 kg, Approx. Onsite Dimension. (l x w x h): 460 x 580 x 420 mm

Description: SPECIFICATIONS Character: Goyar Type: IE-40/25 Machine weight: 38,500 kg Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 50 mm Number of rolls: 3 Upper roller diameter: ø530 mm Bending capacity: 40 mm Rolling speed: 4 m/min Electrically driven: Yes Power of main motor: 70 kWweight approx.: 38,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 7,000 x 3,100 mm

Description: SPECIFICATIONS Character: Haeusler Type: RMA 2,500x30 Year of construction: 1962 Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 30 mm Number of rolls: 3 Upper roller diameter: ø450 mmweight approx.: 24,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 7,200 x 2,750 mm