Pratos giratórios de soldagem (26)

O posicionador de soldadura PEMA HPS 3500 & TPS 3500 foi construído em 2021 na Finlândia pela Pemamek Oy Ltd. O sistema consiste em duas máquinas extremamente versáteis – a cabeça HPS 3500 e a capa de tração TPS 3500, com uma carga útil combinada de 7 toneladas. Esta solução é dedicada a levantar e rodar peças longas, tornando-a ideal para a produção, entre outras, torres de vento, estruturas de reboques ou tubos. Ambas as máquinas podem trabalhar em conjunto ou de forma independente. O ajuste gradual da altura assegura um ajuste preciso dos parâmetros de trabalho às dimensões das peças. Especificações técnicas do posicionador de soldadura PEMA HPS 3500 e TPS 3500 - carga útil: 7 t (cabeça 3,5 t + contramão 3,5 t) - velocidade de rotação: 0,06-1,3 rpm - Intervalo de ajuste de altura do eixo inclinável: 700-1500 mm - Diâmetro da placa da mesa de traba ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 24400 €: 468.48 €: 3000 kg: 150 mm: 150 mm: 360 °: 135 kgm: 400 / 50 V / Hz: 1.1 kW: 1.1 kW: 1200 mm: 700 - 950 mmThe hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted to the floor.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.The rotation speed can be adjusted via a potentiometer.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 295 mm, 100 kg

Rotador de Soldadura SAF POSISAF 1E Diâmetro da prateleira: Ø 295 mm Capacidade máxima: 100 kg Giro manual Rotação por varitador de velocidade direita/esquerda Equipado com um mandril concêntrico de 3 mandíbulas Ø 200 mm Tensão: 220 V mono Dimensões no suporte: L 800 x L 450 x A 1200 mm

: neu : 2025 : 020157 : prompt, Zwischenverkauf v : Türkei : 6320 €: 121.98 €: 1 : 250 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operat ...

Posicionador rotativo de coluna dupla com dispositivo de elevação Lg.Nr. 25138 Especificações: - Capacidade máxima de carga por suporte: 4000 kg - Capacidade de carga total máx. 7000 quilogramas - Curso / curso 1780 mm - Velocidade de elevação 1600 / 2800 mm/min - Movimento rotativo eletrônico. ajustável - Direita + Esquerda – Correr - Acionamento 400 V - Requisitos de espaço solicitados. Unidade aprox. L 1500 x A 4000 x P 1500 mm - Requisito de espaço para a unidade móvel W 1300 x H 4000 x D 1300 mm - Unidade acionada por peso aprox. 4000 quilogramas - Unidade de corrida de peso aprox. 2500 quilogramas

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 11000 €: 211.2 €: 1000 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.55 kW: 0.75 kW: 0.1 - 3 U/min: 60 s: 1200 mm: M20X6 mm: 1000 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segment ...

O posicionador de soldadura BODE TT60 é utilizado para a manipulação de uma peça com um peso máximo de 3000 kg durante o processo de soldadura. O dispositivo permite trabalhar na posição ótima, contribuindo assim para uma melhor qualidade de soldadura. A versatilidade combinada com soluções de design perfeitamente pensadas fazem com que o posicionador de soldagem BODE garanta um manuseio seguro e uma operação sem problemas por muitos anos de uso. Especificações técnicas do gira-discos de soldadura BODE TT60 - Peso máximo da peça: 3000 kg - diâmetro da mesa: 2800 mm

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 €: 96.69 €: 100 kg: 150 mm: 150 mm: 360 °: 120 kgm: 230 / 50 V / Hz: 0.25 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 350 mm: M12x6 mm: 690 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, seg ...

Oferta 23348 Especificações: - capacidade de carga máxima 1500 Kg - Diâmetro da placa facial 850 mm - Distância do chão ao eixo central de rotação 800 mm - Movimento rotativo eletrônico. infinitamente variável 0,08 - 1,6 rpm - Direita - + Esquerda - Correr - Transmissão de corrente de soldagem aprox. 700 A - Acionamento 400 V / 2,2 kW - Requisitos de espaço Unidade aprox. L 850 x A 1450 x P 1000 mm - Requisito de espaço: Unidade móvel W 850 x H 1450 x D 1000 mm - Peso da unidade acionada aprox. 550 quilogramas - Peso da unidade móvel aprox. 400 quilogramas

: neu : 2025 : 020156 : prompt, Zwischenverkauf v : Türkei : 6720 €: 129.7 €: 1 : 250 kg: 205 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mm: 1000 mm: 700 mm: 1700 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following f ...

Key data: 1500 mm, 3500 kg

Número de Stock: 3871 GIRA-DISCOS DE SOLDADURA Fabricante: ESAB PEMA, Tipo: 3500 F Máquina no.: A7001, Ano de fabricação: 1987 Especificações: Tamanho da mesa 1500 mm Ø Peso da peça grande: 3500 kg Gr. torque rotacional 3100 NM Rotações de mesa infinitamente variáveis. 0.01 - 0.8 PR/min Acionamento hidráulico e ponta Comprimento: 2000 mm, Altura: 1100, Largura: 1500 mm, Peso: 1200 kg

table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Especificações: - Tabela de posicionamento da capacidade de carga aprox. 750 kg - Diâmetro da chapa de chapa 500 mm - diâmetro máximo de obra de 1600 mm - Gira-discos de altura na posição horizontal aprox. 750 mm - Gira-discos com direita, + corrida à esquerda - Giratório rotativo sem fim 360 - Tempo de viragem por revolução 12,5 segundos. - Pan esquerda + direita - Ângulo de rotação do eixo 180 - Tempo de giro para 180 ângulos giratórios 10 seg. - Botão de 2 x pé duplo para gira-discos + braço giratório - hydr. Parafusos de fixação para prender a peça de trabalho no centro do prato giratório - Traçado de aperto / distância de aperto do parafuso de fixação 32 mm - Força de aperto pressionando / puxando 80 / 48,9 kN - Fio interno do cilindro de fixação M 27 x 40 - Controlo de posicionamento SIEMENS - Operação manual ou  ...

table diameter: 500 mmtable load: 300 horizontal kg.table load: 150 vertikal kg.swivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,5 U/minbore: 90,0 mmtable height: ~ 650 mm mmmotor: 230 Voltweight of the machine ca.: 90,0 kg.range L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be tilted and clamped at an angle of 0 ° to 90 °- manual tilting- Start / stop via location-independent foot switch- Direction of rotation can be selected right / left- Adjustable rotation time- The control of the welding machine via control- 350 amp ground connectionScope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidade: 6000 kg Dimensões da placa: 1500 x 1500 mm Gama de ingesmitating inclinada: horizontal a - 145° Velocidade de rotação: 0 - aprox. 1 rpm electr. Ligação: 400 V, aprox. 5 kW Requisito de espaço: 2800 x 2350 x 3250 mm Peso: 5000 kg

table load: 1000 kgtable diameter: 900 mmturning speeds: 0,12 - 1,2 U/minswivelling range: 0 - 135 Gradspeed: Kipp 0,35 U/minwelding current: 500 Adimensions of the machine ca.: 1475 x 1050 x 900 mmFor heavy industryWhen choosing a turntable, it is essentialTurning and tilting torque must be taken into account. To noteapplies to how far the center of gravity of the workpiece is from theThe faceplate is away or how far the center of gravity isis eccentric from the center. By means of aRotary and tilting tables can be used to optimize workpiecesposition for welding.- Robust construction.- Infinitely variable.- Hand remote control.- HF protected.Furnishing :- 1 control (integrated)- 1 wired remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidade máxima de carga com disco de planagem horizontal de 60 toneladas, carga máxima com planboard vertical 90° num centro de carga de um metro 30 toneladas – com um centro de carga de dois metros 19 toneladas.

diâmetro da mesa: - mmcarga da mesa: 3000 kgfaixa de giro: 360 Gradfaixa de movimento vertical: 1380 mmvelocidade de curso: 1900 mm/min: 360 necessidade de potência total: 4 kWpeso da máquina ca.: 5400 kgdimensões da máquina ca.: 3800 x 3700 x 4200 mm

table load: max. 40 t twith manual operation panel: ja weight of the machine ca.: 22 t: 1918 Year: ca. 1990 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kgWorking height minimal: 350 mmWorking height maximum: 1850 mmmax. torque: 3000 Nm0: 1 U/minadjustment speed: vertikal 560 mm/minvertical adjustment: 1500 mmbaseplate diameter: 600 mmrotation movement: 0,75 kWstroke drive: 1,85 kWheight of the plant: 2505 mmweight: 1160 kgVideo available on our website.: Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory.Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation.Due to its special design, the column po ...

weight max. in kg: 1250 kgWorking height minimal: 540 mmWorking height maximum: 1120 mmtable diameter: 800 mmswivelling range: --> 95 Gradmax. torque: 490 Nmtable rotation speed: 2 U/minWorking height from to: 540 - 1120 vertikal mmWorking height from to: 700 - 1280 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 757 kgdimensions of the machine ca.: 1,76 x 1,63 mHydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 2 tswivelling range: --> 95 Gradmax. torque: 1250 Nmtable rotation speed: 2 U/minWorking height from to: 550 - 1300 vertikal mmWorking height from to: 650 - 1400 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 930 kgdimensions of the machine ca.: 1,85 x 1,66 mElectric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mmtable load: 7.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M24 Tilt Angle: 90-180-100 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 3.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 715 mmtable load: 500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-110 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 675 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.