Prensas hidráulicas (24)

Pressa de dobra, ITALPRESSE mod. PHF 60 - Regras CE - Platens dim. mm. 1600X1100 - N. 4 cilindros - Abertura máxima de 1000 - Motores no máximo 1,5 kW - Volt. 380/50 - Ano 2001

- Nominal force of 15 T. - Work table of approximately 1500 x 1200 mm. - Maximum opening approximately 1600 mm. - Ø 80 mm main thrust cylinder. - Four guide columns of Ø 95 mm. - Drive by upper hydraulic group with electric motor. - Equipped with SIEMENS SIMATIC OP7 control panel, PILZ safety controller and RAYTEK pyrometers for temperature control. - Electrical panel integrated into the machine. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-9

HOT PRESS modelo OMC PL 90 , com aquecimento diatérmico a óleo Máquina em segunda mão máquina trabalhou muito pouco excelentes condições de trabalho, como novas Máquina compatível com CE aquecimento diatérmico de óleo através de caldeira elétrica embutida potência de aquecimento KW 9 / 18 para madeira, folheados, materiais compósitos, mobiliário, painéis, etc platen tamanho útil mm.3000 x 1300 n.06 cilindros diam.mm.85 impulso máximo Ton.90 abertura mm.400 potência do motor da bomba hidráulica Hp 3 n.4 racks para guia de elevação de mesa Impulso máximo 2,5 kg/cm2 potência total instalada 21 kW volt. 380/50 peso líquido kgs. 4500

- Four-column hydraulic press for pressing and die-cutting operations. - Nominal force 15 T. - Work table 1500 x 1200 mm. - Maximum opening approximately 1600 mm. - Four-column structure with vertical guide of the moving plate. - Upper hydraulic unit integrated into the structure. - Total installed power 11 KW. - Electrical panel with SIEMENS PLC. - Perimeter security guards with front access. - Integrated control desk and control panel. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-5

Prensa tipo JJZ-CP projetada para a produção de compensado, portas, MDF. Os elementos colados são alimentados e removidos da prensa automaticamente por meio de rolos acionados. A prensa pode ser usada com alimentadores de cola. Especificações: -pressão máxima 500T/ ajustável/ - altura máxima da carga: 1300mm -tamanho máximo do lote 1300x2500 - tamanho da prensa 3600x1370x4500 mm - fundação da prensa ~ 500 mm abaixo do nível do chão -mesa de alimentação 2000x1960 mm -mesa de receção 2350x2500 mm -potência máxima 13.2 kW -Ce -capacidade de 6 lotes por hora Atualmente, colamos portas de painel e placa de MDF em prensas. Muito bom estado técnico. Oferecemos uma linha de produção de contraplacado dedicada a estas prensas.

- Automated compression molding line composed of pre-press, main press, automatic loading and unloading system. - Hydraulic pre-press with clamping force 200 t. - Prepress work table 1900 x 1000 mm. - Approximate maximum opening of the prepress 1700 mm. - Main hydraulic press with closing force 600 t. - Main press worktable 2100 x 1600 mm. - Maximum aperture approximately 1750 mm. - Automatic parts loading system. - Automatic unloading system by means of an ABB 6-axis industrial robot equipped with handling tools for the extraction of parts. - Perimeter protection cabin with safety guards and interlocks. - Integrated electrical control panel and control desks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those  ...

ESPECIFICAÇÕES: Prensagem a frio Mesa de trabalho mm: 2500 x 1300 No. 4 pistões Curso vertical: 450 mm

- Automated compression molding line composed of pre-press, main press, automatic loading and unloading system. - Hydraulic pre-press with clamping force 200 t. - Prepress work table 1900 x 1000 mm. - Approximate maximum opening of the prepress 1700 mm. - Main hydraulic press with closing force 600 t. - Main press worktable 2100 x 1600 mm. - Maximum aperture approximately 1750 mm. - Automatic parts loading system. - Automatic unloading system by means of an ABB 6-axis industrial robot equipped with handling tools for the extraction of parts. - Perimeter protection cabin with safety guards and interlocks. - Integrated electrical control panel and control desks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those  ...

Prensa de gravação em relevo - máquina de gravação em relevo Hidráulica Superfície de compressão, 600 x 2700mm Superfície de compressão aquecida

- Nominal force 400 T. - Maximum working pressure of the hydraulic system 25 MPa. - Dimensions of the work table approx. 2050 x 1600 mm. - Carriage stroke 1500 mm. - Maximum tool dimensions 2000 x 1300 x 600 mm. - Approach speed 500 mm/s. - Working speed 10-100 mm/s. - Return speed 500 mm/s. - Total installed power 52.50 kW. - Electrical control panel with regulation of process parameters. - Perimeter protection cabin with safety guards and interlocks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-3

ESPECIFICAÇÕES: Pressão hidráulica para elementos dobrados Dimensões da mesa de trabalho mm: 3000 x 1600 Número de pistões: 2 diâmetros Ø 200 mm Pistão traçado mm: 1400 - Cerca -Bomba de óleo - 02 Aberturas de saída de vapor

- Nominal force of 50 T. - Work table of approximately 1400 x 1000 mm. - Maximum aperture approximately 1150 mm. - Main thrust cylinder of Ø 150 mm. - Four guide columns of Ø 95 mm. - Drive by upper hydraulic group with electric motor. - Equipped with SIEMENS SIMATIC control panel, PILZ safety controller and OMRON electronic controllers. - Electrical panel integrated into the machine. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-8

Prensa hidráulica Pellegrini Água quente Área de prensagem 4000 mm x 1300 mm aplicação manual de cola incl. Tabela de inserção Aceitação: Vácuo - Empilhadora de Gantry SIRIO

- Nominal force 400 T. - Dimensions of the work table approx. 1900 x 1500 mm. - Carriage stroke approx. 1600 mm. - The electrical control panel is incomplete; The rest of the machine's electrical installation remains installed. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-4

pressure: 250 tdistance between columns: 600 mmstroke: - mmtotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 2 x 2 x 3,2 mNo. 3421Mould press 2500 / 700 kNSingle stroke 2-handSingle stroke foot switchAutomatic continuous run set-up and tippingTable 500 x 500Working range: Pressure capacity 250 tonnesDrive: ^22The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 ttable surface area: 2100 x 1400 mmpassage width: 2122 mmtotal power requirement: 60 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mPress/punch with injection molding unit200 ton punch upstroke press with injection molding machine (400to)Additional guard locking via 4 power strokesManufacturer: R+S TechnikYear of construction: 2013 / rebuild 2016Mains voltage/frequency: 400V/50Hz 3~(N/PEConnected load: 60KWWeight about 35000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Work table 1600 x 1500 mm. - Maximum opening approximately 300 mm. - Main cylinder of Ø150 mm. - Four auxiliary cylinders of Ø80 mm. - Upper hydraulic group with 11 KW motor. - Electrical panel with SIEMENS PLC. - Integrated control panel. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-10

pressão: 7 tgarganta: 180 mmcurso: 100 mmárea da superfície da mesa: 300x300 mmsuperfície RAM: furo de 105 mmna mesa: 60 mmaltura da mesa: 1050 mmfuro da ferramenta na ram: 30 mmrequisito de potência total: kWdimensões da máquina ca.: BxTxH 1200x1200x2100 mm

pressure: 20 tdistance between columns: 450 mmstroke: 100 mmtable surface area: 440x320 mmram surface: Ø140 mmhole in the table: Ø50 mmtable height: 900 mmtool hole in ram: Ø40 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 1400x1200x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 25 tdistância entre colunas: 800 mmcurso: 100 mmdayligth: 450 mmárea de superfície da tabela: 750x750 mmpeso da máquina ca.: 3 tdimensões da máquina ca.: 1500x1500x2700 mm

pressão: 100 tgarganta: 275 mmcurso: 150 mmárea da superfície da mesa: 860x550 mmsuperfície RAM: 600x400 mmaltura da mesa: 810 mm furo da ferramenta na RAM: 50 mmdayligth: máx. 475 mmpeso da máquina ca.: 7 tdimensões da máquina ca.: BxTxH 2000x2500x3300 milímetro

pressure: 100 tdistance between columns: 625 mmstroke: 150 mmtable surface area: 580x450 mmram surface: 580x340 mmhole in the table: Ø 150 mmtable height: 850 mmtool hole in ram: Ø 45 mmcolumn travel -side: 200x200 mmweight of the machine ca.: ca. 6,0 tdimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 250 tdistância entre colunas: 900 mmcurso: 300 mmárea da superfície da tabela: 850x900 mmsuperfície RAM: 800x880 mmcurso: 300 mmaltura da mesa: 1050 mm

pressure: 400 tstroke: 300 mmtable surface area: 1200 x 700 mmram surface: 1200 x 700 mmdayligth: 500 mmadjustment of stroke: 300 mmreturn capacity: 348 kNcapacity of ejector: 100 kNejector stroke: 100 mmtotal power requirement: 65 kWweight of the machine ca.: 28 tdimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m= Frame pressAccessories: tool changing table- next safety inspection according to stamp 05/2021 -- with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.