CONTROLS PLC SIEMENS S5 PRESS DESIGN drive system: eccentric / crank frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 number of slide actions: 1 table cushion: yes quick die change system: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 400 to nominal work capacity: 32 kNmPRESS TABLE table surface (left-right): 2600 mm table surface (front-back): 990 mm thickness of bolster plate: 200 mm height above floor level: 800 mm opening in bed (left-right): 2250 mm opening in bed (front-back): 280 mmSLIDE slide force: 400 to table surface (left-right): 2600 mm table surface (front-back): 990 mm & ...
IHI Transfer Press Model SL4-1600-450-220. Com o NC Feeder, sistema de transferência, incluindo robôs. Novo : 1984 Capacidade : 1600 toneladas Curso: 850mm Altura do die :1400mm Ajuste do deslizamento : 500mm Não. de Curso: 16R. P.M Área de reforço : 4500 x 2200mm Pressão do ar de trabalho da embraiagem : 4,5kg/cm2
PRESS DESIGN drive system: eccentric / crank frame design: H-frame, tie rod openings in uprights: yes table cushion: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 200 toPRESS TABLE table surface (left-right): 1780 mm table surface (front-back): 1300 mm opening in bed (left-right): 1445 mm opening in bed (front-back): 260 mmSLIDE slide force: 200 to table surface (left-right): 1500 mm table surface (front-back): 1100 mm stroke: 178 mm stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS) slide adjustment: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 120 /minDIE CUSHION (TABLE CUSHION) number of cushions: 11 cushion force: ...
pressure: 2500 ttable length: 5200 mmtable width: 2300 mmPRESS FORCES: • CAPACITY : 2500ton• Point pressure capacity: • - Upper 1600t• - Down 900ton• Slide stroke: 650mm• Slide adjustment: 225mm• Slide stroke number: continue 9~25spm • Die-height: 1250mm• Slid size(LxR ,FxB): 5400x2400mm• Bolster size(LxR, FxB, T): 5200x2300x200mm• Balance capacity: 30ton• Main motor: DC 355kw• Feed back(bolster upper side): 700,780mm• Feed back stroke : 550,700,1000mm• Cramp stroke : 0-250mm• Lift stroke: 0~150mm• Transfer inner size(cramp): 650~2200mm • Die cushion capacity• No.1 station 120ton• No.2 station 80ton• No.3 station 60ton• No.5,6,7 station: 5ton• Stroke: 200mm• Bed size: 480x1780mm• Stop time: 430msThe data for this ad was created with ModulMWS - the software solut ...
PRESS DESIGN drive system: eccentric / crank openings in uprights: yes feedstock transport direction: right to left PRESS FORCES total force (nominal): 315 to nominal work capacity: 45 kNmPRESS TABLE table surface (left-right): 2250 mm table surface (front-back): 1100 mm thickness of bolster plate: 150 mm height above floor level: 1000 mmSLIDE slide force: 315 to table surface (left-right): 2250 mm table surface (front-back): 880 mm stroke: 210 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke rate (min.): 25 /min stroke rate (max.): 80 /min main drive power: 60 kWSLIDE EJECTOR / CUSHION working principle: pneumatical nominal force: 1. ...
KRUPP PST-A 160 transfer press construído em 1980. Dados técnicos da imprensa KRUPP PST-A 160: - pressão nominal: 160 toneladas - força de corte grau 1: 400 KN - força entre stands: 1200 KN - número de etapas de trabalho, incluindo fase de corte: 11 - distância entre stands: 200 mm - traçado de slider: 210 mm - profundidade de desenho: 70 mm - gama de saltos, infinitamente ajustáveis: 15-75/min. - gama de saltos de produção com repetibilidade da sua configuração: 25-75 /min. - número de movimentos de acionamento: 15-25/min. - um recurso de trabalho utilizável para um salto na gama de 25-75 tacadas por minuto. : 20.000 J - carga máxima num único passo: 500 KN - carga máxima de um único passo utilizando inserções: 630 KN - largura máxima da fita: aprox. 340 mm - diâmetro máximo do corte: 120 mm - diâmetro mínimo do padrão: 30 mm - distância e ...
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank number of slide actions: 12 PRESS FORCES total force (nominal): 36 toSLIDE slide force: 3 to stroke: 38 mmSLIDE (MECHAN. PRESS) variable speed: yes main drive power: 4 kWOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 50 mm feedstock transport direction: front-back STRIP-FEEDER feeder type: roll feeder sheet width max.: 50 mm pilot release system: no band lubrication system: optional TRANSFER SYSTEM number of tool stations: 13 distance between tools, stroke X fixed: 63.5 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2400 mm ...
PRESS DESIGN number of slide actions: 12 PRESS FORCES total force (nominal): 36 toSLIDE stroke: 44 mm stroke rate (max.): 160 /minThis machine will have the following installed/added to ito new lubricationo new electrical installationo new protectionso CE conformityNumber of station 13 (12+1).Capacity on any one station 3 tons.Max stroke 44 mm.Standard stroke cams.Max blank diameter 47 mm.Operating speed range 40 to 160 SPM max.Machine weight approx. 3200 kg.
CONTROLS PLC SCHNEIDER PRESS DESIGN drive system: eccentric / crank number of slide actions: 11 feedstock transport direction: left to right PRESS FORCES total force (nominal): 66 toSLIDE slide force: 6 to stroke: 114 mmSLIDE (MECHAN. PRESS) variable speed: yes stroke rate (min.): 40 /min stroke rate (max.): 130 /min main drive power: 7.5 kWSTRIP-FEEDER feeder type: roll feeder TRANSFER SYSTEM distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 2875 mm space requirements -front/back-: 1500 mm total height: 2900 mm total weight approx.: 7500 kgATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engagement: yes n ...
PRESS FORCES total force (nominal): 72 toA new electrical control system and a mechanical and lubrication rebuild are required.One used PLATARG model 611 transfer press, high speed type.Full follow cams.Number of stations: 12Number of rams: 11 + 1 slaveCapacity on any one ram: 6 tonsSpeed range: 30 – 120 SPMMax shell height: 20 mmTransfer slideMachine awaiting refurbishment
PRESS DESIGN drive system: eccentric / crank number of slide actions: 10 SLIDE stroke rate (max.): 110 /min10 stations + 1 auxiliary5 ton per stationDistance between stations: 54 mm (2-1/8")STROKE OF CAMS (STANDARD)#1 25-35 mm (1- 1-3/8")#2 to #10 25-41 mm, (1 - 1-5/8")Speed: 110 SPM
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6 table cushion: yes 6 stations plus auxiliary stationUsed for eyelet production - tooling still mounted
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6