acessórios para máquinas-ferramentas usadas para venda (2,130)

-Compressor de motor totalmente hermético -Mech. Termóstato Capacidade de refrigeração: 0.8kW Tensão: 230V/50Hz Potência da bomba: 0.12kW Tanque de água: 15l

Placa de fundição / placa de marcação Localização: Bremen Material: Ferro fundido Dimensões: 300 x 150 cm Aplicação: Trabalho de precisão e medição na construção de máquinas e ferramentas Características: alta estabilidade dimensional, superfície plana, adequado para escrever, testar e alinhar peças de trabalho

Por favor, note a ficha técnica!

Key data: 200 mm

Placa facial 200 mm, precisão parcial +/- 15", incl. Servomotor com fixação hidráulica Altura fixa da ponta traseira 200 mm

Máquina de medição Wenzel Smart CMM 1000 Ano de construção 2010 Curso: Eixo X: 1000 mm, Eixo Y: 450 mm, Eixo Z: 400 mm Bom estado de conservação

Gebr. Mandíbula 3 & 4 de Röhm com 125 mm de diâmetro.

Gebr. Chuck 4 mandíbulas chuck, Fabr. Röhm, 315 mm

Temos vários suportes de aço Multifix, tamanho D1D em vários projetos em estoque. Em parte também com brocas e aços de torneamento. Informe-se sobre as datas exatas e os pedidos. De bom grado também em quantidades maiores.

Gebr. Suporte de aço Inserir Fabr. Tripan, Tipo 431 Kj Uregwt Ucehyxkonb Por favor, solicite a respetiva quantidade individualmente.

Vários acessórios para uma fresadora Bridgeport de acordo com a foto 3 mandíbulas Chucks, placas de face, fresadoras, collets e muito mais.

Gebr. Ímã Quick Lifter (Função ON / OFF)

1 Gebr. 3. - Panificação Chuck Forkardt F 250

Gebr. Dispositivo de cópia Fabr. Copymat, Tipo 1301A2

Temos vários suportes de aço Multifix, tamanho D1D em vários projetos em estoque. Em parte também com brocas e aços de torneamento. Informe-se sobre as datas exatas e os pedidos.

diferentes conjuntos para um mandíbula F 200 3 (mandíbulas de base nas mandíbulas superiores)

Escala de contagem Fabr. TOLEDO Tipo 4652 Especificações: Kns Ujikbg Herhyxksb Carga máxima 20 kg Função de contagem 1:9 / 1:99 Dimensões exteriores aprox. 650 x 350 x 600 mm

Temos inúmeros suportes de aço Multifix, tamanho C em vários projetos em estoque. Em parte também com brocas e aços de torneamento. Informe-se sobre as datas exatas e os pedidos.

Key data: 160 mm

1 Gebr. Vise com mesa rotativa Largura da mandíbula 160 mm (outros tamanhos a pedido)

1 Gebr. Mesa de fixação 600 x 600 mm

Scanner de borda 3D digital MarTest 802 EW Áreas de trabalho X, Y, Z -Eixo: - 2 a 4 mm Dffernschrittwert_mm: 0.005

Carrinhos de ferramentas em vários tamanhos e designs da Gedore & Orion

Gebr. Cabeça divisória com um mandril de 3 mandíbulas de Röhm (110 mm).

SIDEROS Modelo ECO 6 HC Ano de construção 2006 7,5 KW

length: 1000 mmwidth: 750 mmEquipment:- Measuring plate with T-slot- JFA accuracy grade 1+- Permissible deviation 0.004 / Actual deviation 0.003The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmweight: 153 kgWith the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as wellFlexibility and benefit from the wide range of possible uses.The stable steel construction offers stability even during theAdjustment of the working height.Maximum load capacity including perforated plate 500 kgWorking height between approx. 700 and 1,000 mmincluding 16 hole plate:- through hardened tool steel X8.7,- plasma nitrided and BAR coated- Hole Ø 16 mm- Holes surface 50x50 mm grid- Material thickness 12 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmweight: 177 kgWith the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as wellFlexibility and benefit from the wide range of possible uses.The stable steel construction offers stability even during theAdjustment of the working height.Maximum load capacity including perforated plate 500 kgWorking height between approx. 700 and 1,000 mmFor clamping on Premium Light with a clamping boltif the spacer ring article no. 280653.N required.including 28 mm perforated plate (light):- Premium Light- through hardened tool steel X8.7,- plasma nitrided and BAR coated- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Material thickness 15 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 127 mmclamping width: 0 - 208 in 3 Stufen mmclamping capacity: 4000 kgtotal power requirement: manuell kWweight of the machine ca.: 52 kgdimensions of the machine ca.: 670 x 151 ( L x H ) mmFurnishing:- hydraulic machine vice- Robust structure for milling, drilling and grinding- Vice body made of high quality cast iron- Guide surfaces hardened and ground- Jaws hardened, ground and exchangeable- Protected spindle- Booster system, little effort required, high pressure when clamping- Wide clamping range thanks to locking bolts with different hole spacings- With turntableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conveying height: 2,5 Metercoolant capacity: 8,0 l/min0: 11,0 ltr.motor: 400 Voltrange L-W-H: 370 x 245 x 170 mmFurnishing:- with plastic container (10 liters) and flexible hose- 230 V connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 685 mmwidth: 460 mmheight: 115 mmT-slot - width: 10 mmT-slots: 3 StückPayload: 40,0 kgwidth: 315 mmlength: 340 mmtravel -x axis: 285 mmtravel -y axis: 140 mmmanual control device: 0,04 Nonius mmweight: 45,0 kgProperties:for light milling work on table or crevice drilling machinesGround clamping surfaceDovetail guide adjustable by means of wedge linesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mmWorking width: 360 mmroll diameter: 60,0 mmweight max. in kg: 900 kgheight adjustment: 620 - 1055 mmweight: 66 kgDescription:The RB 10 roller conveyor is a particularly practical aid forthe support and movement of long and heavy workpieces.It can be used individually and expanded as required and through theretrofittable PVC-coated rollers can also be used for delicate materials.Furnishing:- Infeed roller conveyor- Optimal aid for the support of long and heavy workpieces- Roller support steplessly height adjustable and clampable- Safe workpiece support thanks to massive and heavy duty galvanized steel rollersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.