Linha de extrusão APV 125MP compounding line

máquinas para processamento de plástico / extrusoras
exija mais fotos
adicionar à lista de observados
enviar inquérito
opinião da cópia
Número do item: 162905398 Quantidade: 1 Data: 28.04.2024
Ano de fabricação: 1990
Preço: 142,000 EUR
Fabricante: APV
Modelo: 125MP compounding line
Tipo de máquina: Linha de extrusão
Descrição: Linha de extrusão APV 125MP compounding line

máquina usada

Extruder is missing electronics and it is not in running condition.

Barrel 30D
The barrel was opened for inspection of the liners and shafts, the hydraulics function correctly.
Liner 1.
Feed, 2.5D good condition
Liner 2.
Inter, 5.0D good condition
Liner 3.
Inter, 5.0D good condition
Liner 4.
Inter, 5.0D good condition
Liner 5.
Inter 5.0D good condition
Liner 6.
Inter 2.5D good condition
Liner 7.
XLT Discharge 5D good condition.
Feed and return lines were removed and compressed air fed into circulation blocks. All blocks were found to have good
flow.
Pipework is in good condition with all solenoids present.
All control thermocouples and melt thermocouples are in place but could not be tested due to condition of electrics.
All the heaters are in place but could not be tested due to the condition of electrics.
The barrel is in very good overall condition.
Shafts
All elements are in good condition with very little visible wear.
Customer has numerous spare elements and 2 sets of new shafts

Spares held by customer,
Feed Screw 1D 1D 18 off
Feed Screw 1.5D 1D 14 off
Feed Screw 0.75D 1.5D 6 off
Feed Screw D/4 1.5D 4 off
Tight Helix Feed Screw 1D 5 off
Feed Screw – XLT transition 1.5D 1D 5 off
Orifice plugs D/4 4 off
Paddles D/4 69 off
XLT FS 117mm 3 off
XLT FS 156.25mm 6 off
XLTD FS 156.25mm 3 off
End pins 2 off
Set of E461673 shafts 2 off
Gearbox
The motor coupling and the shaft couplings were disconnected from the gearbox.
No excessive backlash, end float or radial movement is present in the input or output shafts.
Timing is ok.
There are no visible oil leaks.

Electrical panels
The extruder electrics/electronics have been badly vandalized and as far as I can see very little can be salvaged and a
new panel would be needed in order to run the extruder and feeders.
The original panel controlled 8 feeders and all ancillary equipment and ran on Siemens S5 see below photos.
seller offer No. resale P91004100
Seller-item-No.: P91004100

Inquérito

Negociante de máquinas?

Por favor remeter opcionalmente

Enviar o pedido?

(a todos os revendedores para tal máquina)

Copie para você?

(cópia da seu inquérito será enviado para seu endereço de e-mail)