| Descrição: |
Máquina de rebarbação de chapa metálica GECAM G 135 RX
máquina nova
: neu
: ca. 12 - 14 Wochen ab Auf
: Italien
: 74000
€
: 1487.4 €
: 1350 mm
: 0,5 - 170 mm
: 1370 x
2200 mm
: 4000 m³/h
: 200 mm
: 6 bar
: 78 (+/-2)
dB
: 1750 mm
: 2100 mm
: 2180 mm
: 2000 kg
WITH 2
WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON
TOP
Machine made of stress-free welded steel construction for
stable and rigid structure.
Work table with motorised height
adjustment via 4 synchronised spindles.
Independent drive motors
for each work group.
Bonnets for extraction inside the machine,
one per station.
Touch screen for
-Automatic star-delta
connection of the main motors
- Analogue ammeter for each
group
- Digital display for sheet thickness with decimal point
tolerance
- Material thickness adjustment (+/- 0.1 mm)
-
Machine condition monitoring with alarm messages
FEEDING
SYSTEM
Robust steel structure, wear-resistant
surface.
Vacuum conveyor belt on request
Variable feed speed
via frequency converter 0.6 to 6.5 m/min.
Rubber conveyor belt,
oil and temperature resistant
Automatic conveyor belt
centring
Lateral guides to prevent the belt from lifting
off.
Rubber pressure rollers in front and behind each station, oil
and temperature resistant
Idle rollers at the front and rear
table
1 . WORKING GROUP - R
Balanced contact roller
Anti-oil and anti-heat Nitrile rubber coating
Adjustable via
eccentric shaft for working position and compensation of abrasive belt
wear
Pneumatic cylinder for automatic feed to working position and
for lifting in case of emergency stop.
Abrasive belts and/or
Scotch Brite can be used.
Motorised adjustment and electronic
control of contact roll height.
Variable speed motor with
automatic brake in case of emergency.
Pneumatic tensioning system
for the abrasive belt.
Sanding belt centring system, with
electronic photocell.
Oscillation adjustment in width and
time.
Diameter of contact roller
mm
180
Hardness of the rubber wheels
Shore
55
Stroke of
the contact roller adjustment up-down ",Grain adjustment
mm
8
Positioning accuracy of the contact roller
adjustment
mm
+/- 0,02
Positioning speed of the
contact roller adjustment
m/s
10
Grinding belt
speed
m/s
3-18
Motor power
kW
7,5
2. WORKING GROUP - X
2 rows of vertical brushes,
10rotating clockwise and 10counterclockwise.
Transverse movement
of the entire group (oscillating)
Quick change holder for
brushes
Brush diameter
mm
115
Number of
brushes
No
20
Oscillation stroke
mm
15
Rotation motor power
kW
5,5
Revs
1/min
1000
Oscillation motor power
kW
0,37
Grinding brush speed
m/s
10,0
ACCESSORIES:
B Group - External barrel brush
H51606 Ø 150 mm
with Scotch Brite Brush
€
5.580,00
with Wire Brush 0,3 mm
€
5.900,00
R GROUP - GRINDING BELT
Motor 15 kW
€
1.060,00
Motor with 2 speeds 9 - 11 kW
€
1.830,00
Motor with 2 speeds 12 - 15 kW
€
2.360,00
X GROUP - CUP BRUSHES
Motor with
variable speed 5,5 kW 350/1100
€
4.190,00
OPTIONS:
Return to Sender System (Grinding
part is discharged to the front again)
€
1.290,00
Conveyor belt with vacuum system - 3,0 kW - 300 mm
wide
€
4.780,00
2 additional PVC coated rollers
on infeed and outfeed side
€
2.040,00
Tampico
Brush System for parts cleaning 0,55kW Ø 150 mm
€
4.510,00
Tampico Brush system for conveyor belt cleaning Ø
150 mm
€
4.030,00
magnetic conveying system - 2
groups, 200 x 200 mm
€
13.520,00
Demagnetiser
€
4.940,00
THE MACHINE MUST BE USED
WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH
4,000 M³/H.
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1069-1762
|