outras máquinas e instalações usadas para venda (15,829)

Misturador intensivo de lotes com um enchimento utilizável por lote de 750 l. / 1.200 kg (máximo), esvaziamento através da aba central inferior (operado hidraulicamente), ferramentas: rodopiador de pinos e raspador de parede ao chão. Acionamento do agitador: 45,0 kW por correia dentada, acionamento por tambor: 11,0 kW por pinhão, unidade hidráulica: 2,2 kW para acionamento da trava. Todas as peças em contacto com o produto são feitas de aço inoxidável, com apenas 2.417 horas de funcionamento.

Forno de lareira com bogies aquecido eletricamente para uma temperatura máxima de funcionamento de 1280°C. O sistema de aquecimento é composto por cinco zonas de controlo. O aquecimento é assegurado pelos lados, parede traseira, porta e carruagem. Fio de aquecimento feito de fio APM montado em tubos de suporte. Forno de carga ligada: 75 KW. Inclui 2 sopradores de ar fresco, 2 aquecedores de ar PC, refrigeração com 2 ventiladores de pressão média, abas automáticas de teto, capuz isolado em aço inoxidável, 2 carrinhos de lareira com tampa de placa SiC (orientável, em rodas de PVC, não ligado a carris) e equipamento original com PC Windows (hardware: Siemens SIMATIC Rack PC). Dimensões da câmara do forno (LxDxH): 900 mm x 1.900 mm x 900 mm (= 1,53 m³); Dimensões do espaço útil (LxDxH): 750 mm x 1.840 mm x 850 mm (= 1,173 m³). Pesos: Aproximadamente 3.800 kg (forn ...

Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again., Additional title: Workshop dust extraction, Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h, Power: 2.2 kW, Current: 5 A, Voltage: 400 V, Frequency: 50 Hz, Base construction: on a mobile frame, Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)

Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m³ - Mixing and equalisation tanks 2, 40 m³ - Mixing and equalisation tanks 3, 80 m³ - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m³ - Secondary sedimentation tank 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps, Bioreactor capacity 2 x: 240 m³, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; t ...

Additional title: Control cabinet with touch panel, Voltage: 110-240 V AC, Frequency: 50-60 Hz, Length: 500 mm, Width: 580 mm, Height: 210 mm, Weight: 35 kg, Operation / Control: touchpanel

Malt scale with digital display, Additional title: Continuous flow scale with digital display, Fill sizes: 24 l, Capacity: 300 fills/h, Nominal capacity: 7 m³/h, Voltage: 240 V, Frequency: 50/60 Hz, Compressed air: 5 - 6 bar, Weight: 130 kg

A crate washer for cleaning the outside of bottle crates using spray nozzles., Material: stainless steel, Base construction: on feet

CIP tank with 4 separate tanks for water, lye, acid and disinfectant. The system consists of: - 4 tanks with various fittings - Feed and return pumps - 3 diaphragm dosing pumps - Pipework, pneumatic disc valves - Level sensors, in-line conductivity measurement, full and empty level probes, flow monitors., Additional title: Cleaning system with 4 vertical stainless steel vessels, Volume: 1270 l Caustic tank, acid tank, disinfectant tank, Material: Tanks made of V4A or V2A stainless steel, Features: 4 x CIP tanks, 3 x diaphragm metering pumps, 3 x pneumatic diaphragm valves, feed pump, return pump, 8 x pneumatic ball valves, 3 x full-level sensors, 3 x empty-level sensors, flow monitors, conductivity measurement, level control, switch cabinet

Insulated ice water tank with two top-entry agitators., Additional title: Insulated, rectangular stainless steel mixing tank, Volume approx.: 8000 l, Length: approx. 2,1 m, Width: approx. 2,1 m, Height: approx. 2,6 m, Material: Stainless steel; cladding galvanised, Base construction: rectangular, Features: Insulation; 2 x agitator; over-flow; cooling element

Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main

An industrial vehicle that has been converted into a mobile filling station is available. Load capacity: 3000kg, max. front/rear axle load: 1930kg/2870kg, max. total weight: 4800kg, engine: Perkins diesel. An on-site inspection is possible.

Two cross folding systems MB Bäuerle are available. 1.1) Buckle folding machine Bäuerle prestigeFOLD NET 52, max. sheet format: 520mm/850mm, min. sheet format: 100mm/120mm, max. folding length: 480mm, paper weight range: 40g-250g/m², max. throughput performance: 220m/min, folding units: 2, buckle plates: 6/4, module: PFNet 52/0/4-40. 1.2) Feeder FSA 52, stack capacity: 4500 sheets, max. speed: 150m/min. 1.3) Vertical sheet small format delivery SKM 36 NET, max. inlet width: 360mm. 2.1) Buckle folding machine Bäuerle prestigeFOLD NET 38, configuration: 6/4-FSA, max. sheet format: 380mm/750mm, max. folding length: 480mm, paper weight range: 40g-250g/m², max. throughput performance: 220m/min, folding units: 2, buckle plates: 6/4, module: PFNet 38/0/4, module: PFNet 38/6 FSA. Including various spare parts. Documentation available. An on-site inspection is possible.

Slotted hole drilling machine SAMCO AS 16 -used-engine movable, dowel drilling device---------- Technical data ----------Work table dimensions: 550 x 285 mm, drilling width: 190 mm, drilling depth: 120 mm, speed: 2,840 rpm, motor: 1.5 kW, weight: 220 kg

Veneer press OTT JU 90 -used----------- Technical data ----------Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4 pieces

Combination machine FELDER BF6-26 -used-circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, self-adjusting knife shaft---------- Technical data ----------planing width: 260 mm, number of knives: 2 pieces, planing shaft: 86 mm, passage height: 220 mm, dressing table length: 1300 mm, cutting width: 780 mm, swivel range circular saw: 0- 45 , milling spindle diameter: 30 mm, swivel range milling machine: 0-45 , useful length milling spindle: 120 mm, max. milling cutter diameter: 220 mm, max. retractable

Belt sanding machine HOLZKRAFT LBSM 2505 -used-abrasive belt cover, clockwise / counterclockwise rotation, sanding unit swivelable---------- Technical data ----------table size: 2,400 x 800 mm, projection: 650 mm, motor: 3 kW, sanding belt dimensions (LxW): 150 x 6,400 mmQuality info: - belt running checked- sanding shoe checked - height adjustment checked- sanding table guide checked- complete basic cleaning- electrics checked- immediately ready for use