outras máquinas e instalações usadas para venda (14,549)

Number of axes: 6, repeatability: +/-0.08mm, mechanical unit weight: 145kg, max. wrist payload: 3kg, max. reach: 1437mm, axis working range: A1: 360°, A2: 250°, A3: 455°, A4: 380°, A5: 280°, A6: 720°, axis speed: A1: 225°/s, A2: 215°/s, A3: 225°/s, A4: 425°/s, A5: 425°/s, A6: 625°/s, inertia: A4: 8.9Nm/0.28kgm², A5: 8.9Nm/0.28kgm², A6: 3Nm/0.035kgm², installation dimensions: 283x283mm, control unit weight: 40kg, with control system. An on-site inspection is possible.

Máquina de limpeza utilizada Bom estado visual e mecanicamente Totalmente funcional Sem garantia _ Comprado conforme visto O vídeo em funcionamento pode ser enviado mediante pedido. Pagamento da máquina na recolha ou antecipadamente por transferência bancária Montante da fatura mais IVA

Infeed width: 660mm, equipment: pallet feeder PD-66-T, Tremat sheet separation system, six folding plates in the parallel folding section, downstream knife shaft, two folding knives in the cross-fold section, one additional folding plate after the 1st cross fold and pressing station with standing sheet delivery SB-46/MP.D. The system is technically without problems, rollers need to be replaced. An on-site inspection is possible.

Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement.

À venda está uma bomba industrial completamente nova, inutilizada, de topo absoluto: uma KSB Etabloc (modelo: ETB 065-040-200 GGSAV11D200752) num design compacto, diretamente acoplada a um motor Siemens de alta eficiência de 7,5 kW e poupança de energia. A série KSB Etabloc é o padrão global de referência em fiabilidade, facilidade de manutenção e poupança de espaço no uso industrial. Como é uma bomba de bloco, o impulsor assenta diretamente sobre o veio do motor estendido. Isto poupa espaço valioso na instalação e torna o alinhamento demorado e milimétrico do acoplamento completamente supérfluo – montar, flangear, ligar, funcionar. Graças ao grande impulsor de 200 mm e à potente potência do motor de 7,5 kW, esta unidade é perfeita para aplicações exigentes com maiores cargas e pressões (por exemplo, em abastecimento de água industrial, sistemas de arref ...

À venda está uma bomba industrial nova, não utilizada, da classe premium: uma KSB Etabloc (modelo: ETB 065-050-125 GGSAV11D200402) de design compacto, acionada diretamente por um motor Siemens de alta eficiência energética. A série KSB Etabloc é o padrão global da indústria para máxima fiabilidade com uma pegada reduzida. Como é uma bomba de bloco, o impulsor assenta diretamente sobre o veio do motor estendido. Isto poupa espaço valioso para a instalação e torna o alinhamento demorado do acoplamento completamente supérfluo – coloca-o, liga, corre. Perfeitamente adequado para abastecimento de água, sistemas de refrigeração, sistemas de ar condicionado, sistemas de aquecimento e vários processos industriais. Destaques desta unidade: Estado: NOVO e NÃO utilizado – ideal como bomba de substituição disponível diretamente ou para novos projetos (sem longos  ...

There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible.

An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example.

Forno tubular Fabricante: Nabertherm Tipo R170/750/12 Estes fornos de tubos compactos com controlos integrados podem ser usados universalmente para muitos processos. Equipados com um tubo cerâmico padrão C 530 e dois tampões de fibra, estes fornos tubulares oferecem uma relação qualidade-preço imbatível. • Tmax 1200 C • Design de zona única como padrão • Carcaça dupla feita de chapas de aço inoxidável texturizadas • São usados apenas materiais fibrosos que não são classificados como cancerígenos segundo o TRGS 905, Classe 1 ou 2 • Diâmetro do tubo exterior 170 mm, comprimento aquecido de 750 mm • Tubo de trabalho feito de cerâmica C 530 com dois conectores de fibra como equipamento padrão • Tmax 1200 C: Termopar Tipo N • • Relés de estado sólido garantem um funcionamento de baixo ruído • Aplicação definida dentro das limitaç ...

Ball Mill GMP Fabricante: Pharmag Consistindo em Atuador Universal Pharmag Tipo UAM e a Fábrica de Esferas de Aço Inoxidável BM-5 Ano de construção: 2021 Muito bom estado Documentos disponíveis, incluindo qualificação.

Bomba de calor especial água-aágua da Bartl Apparatebau com permutador de calor coaxial tolerante para água de poço Tipo WB 4 CF/W com capacidade de aquecimento de 13 kW também adequado para operação de salmoura tecnologia muito sólida, opções de controlo muito diferenciadas através de software externo Operação sem problemas desde 2010 estará disponível em junho, quando a mudança for organizada A venda privada ocorre sob exclusão de qualquer garantia e garantia. Se tiver alguma questão ou estiver interessado, não hesite em contactar-nos. Só para colecionadores próprios!

Armário de secagem Fabricante: Memmert Tipo UM

Compressor, compressed air unit, piston compressor -Manufacturer: Atlas Copco, oil-free piston compressor type OIL FREE AIRLET LE 7 N -Motor power: 4 kW -Flow rate: max. 312 l/min -Max. pressure: 10 bar -Pressure vessel: 250 liters -Dimensions: 1400/560/H1180 mm -Weight: 200 kg

A vertical glass mitre grinding machine is offered. Working range (glass thickness): 3mm-40mm, minimum glass size: 80mm × 80mm, number of spindles: 10, angle adjustment (mitre): 0°-45°, feed speed: 0.4m/min-6.0m/min, working height: 830mm, control: CNC control with digital display. Equipped with automatic chain conveyor, water recirculation system, motorized thickness adjustment, polishing automation for the glass edge. Weight: approx. 3800kg, overall dimensions X/Y/Z: approx. 7800mm/1600mm/2600mm. Inspection possible by arrangement.

A single-sided glass drilling system is offered. Table surface X/Y: approx. 800mm/600mm, drilling diameter: approx. 3mm-100mm, table design: grating support for water drainage, control: manual drilling feed. Equipped with sturdy steel base frame, water collection tray. Weight: approx. 180kg, overall dimensions X/Y/Z: approx. 1000mm/1100mm/1650mm. Inspection possible by arrangement.

A vertical glass drilling system is offered. Working range X/Y: unlimited/1300mm, drilling diameter: 3mm-100mm, glass thickness: 3mm-25mm, control: digital position display with manual drilling control. Equipped with rollers on both sides, water collection tray, pneumatic workpiece clamping, drill set. Weight: approx. 1100kg, overall dimensions X/Y/Z: approx. 5000mm/2500mm/1200mm. Inspection possible by arrangement.

A flatbed glass cutting system is offered. Working range X/Y: 3700mm/2600mm, glass thickness: 2mm-19mm, cutting speed: 120m/min, positioning accuracy: +/-0.15mm, table surface: felt covering with air cushion function, bridge design for linear and shape cutting, breakout bars: pneumatically controlled, control: CNC control. Weight: approx. 3200kg, overall dimensions X/Y/Z: approx. 4650mm/3400mm/1350mm. Inspection possible by arrangement.

A glass grinding water cleaning system is offered. Capacity/flow rate: approx. 6m³/h-12m³/h, system components: high-performance dosing pump for flocculant, double sedimentation towers in hopper design, integrated big bag filling station for sludge dewatering, mobile tipping container holder, control: electrical pump control with dosing interval adjustment. Weight: approx. 1450kg, overall dimensions X/Y/Z: approx. 3800mm/4200mm/1800mm. Inspection possible by arrangement.

A laminated glass cutting system is offered. Working range X/Y: 3700mm/2600mm, glass thickness: 3+3mm-10+10mm, operating principle: automatic cutting of laminated safety glass (LSG), separation system: infrared heating blade for PVB film, table surface: felt covering with air cushion function, bridge movement: synchronized for upper and lower side, positioning: automatic via CNC axes, control: CNC control. Equipped with hydraulic loading table (tilting table), mobile control panel, pneumatic breakout devices. Weight: approx. 5800kg, overall dimensions X/Y/Z: approx. 9500mm/4200mm/1600mm. Inspection possible by arrangement.

A vertical glass washing system is offered. Working range X/Y: unlimited/1600mm, glass thickness: 3mm-12mm, number of brushes: 4 units, feed speed: approx. 2.5m/min, washing system: separate washing and rinsing zones, material design: housing and water-carrying parts made of stainless steel, drying: integrated high-pressure blower with air filters, control: push-button control with individual component activation. Equipped with infeed and outfeed transport frames, lighting inspection station, water pump, filter unit. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 4500mm/2500mm/1100mm. Inspection possible by arrangement.

An automatic glass sandblasting cabin is offered. Working range X/Y: unlimited/1500mm, extraction air capacity: 1800m³/h, filter area: 17m², filter differential pressure: 1500Pa, operating principle: automatic surface blasting operation, filter system: cartridge filter unit with pneumatic cleaning, glass transport: vertical roller conveyor system, control: PLC control with digital control panel. Equipped with separate filter unit, blasting nozzle feed unit, water separator, enclosed cabin construction with rubber buffer inlet. Weight: approx. 1550kg, overall dimensions X/Y/Z: approx. 4500mm/2850mm/1650mm. Inspection possible by arrangement.

A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit including pressure gauge, fine adjustment via handwheels, zero point storage, measured value hold function. Weight: approx. 95kg, overall dimensions X/Y/Z: approx. 600mm/550mm/1100mm. Inspection possible by arrangement.

Ventosas de vácuo Fabricante Nilfisk Tipo GB 726 Ano de construção desconhecido Pronto a usar em bom estado Potência 1900 W

Sistema de raios X YXLON YMU2000/DCT, construído em 2014

Forno de recozimento SAT, ano de fabrico 2021, temperatura de recozimento 185 °C, 2 portas

Forno de recozimento SAT, ano de construção 2005, temperatura de recozimento 185 °C, 2 portas

Plataforma Escala de Piso Mettler Toledo ID7

Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible.

Haul length: 1155-3500mm, blank width: 530-2400mm, creasing height: 300-2400mm, creasing length: 410-1600mm, creasing width: 150-1340mm, flap width: 35-50mm, max. format: 7000x2400mm, folded: 3500x2400mm, connected load: 20kVA, length: 15,000mm, width: 8000mm, height: 5000mm, with documentation. An inspection on site is possible.

A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open  ...