outras máquinas e instalações usadas para venda (22,010)

Hydraulic Marine Fishing Net / Rope Winch Heavy-duty hydraulically driven marine winch suitable for hauling and handling fishing nets, ropes, lines and aquaculture equipment. The unit is equipped with a large horizontal drum, hydraulic motor, directional control valve and structural steel frame. Machine type: Hydraulic marine fishing winch Drive: Hydraulic motor Drum: Horizontal winding drum loaded with steel wire rope Controls: Manual directional control valve and handwheel-operated mechanism Hydraulic hoses: EN 853 1SN, WP 105 bar Features: Reduction gearing, hydraulic hoses, guide/bollard posts and steel support frame Approximate dimensions: 1,500 x 1,100 x 1,300 mm Approximate weight: 750 kg The winch is offered in used condition with visible corrosion on the drum flanges, wire rope and internal components. The frame appears structurally substantial and has been repainted. Hydrauli ...

Industrial Electric Motor-Driven Pump Assembly Used industrial pump assembly comprising a three-phase electric motor, coupling or bearing housing and cast pump body. The configuration is suitable for centrifugal or transfer pumping of water and other low-viscosity liquids. Machine type: Electric motor-driven industrial pump Drive: Three-phase electric motor Pump configuration: Cast pump body with coupling or bearing housing Features: Protective motor fan cover, electrical terminal box and pump pipe connection Approximate dimensions: 950 x 400 x 450 mm Approximate weight: 90 kg The pump assembly is offered in used condition, untested and with operation unknown. Visible wear includes heavy dirt, chipped paint, surface corrosion, oxidized fasteners and contamination from prolonged storage. The motor, pump housing, coupling, bearings and electrical connections require inspection before use ...

Hydro-Pack Hydraulic Pump/Motor Units with Parker Hydraulic Component Separate lot of used hydraulic components comprising approximately three Hydro-Pack hydraulic pump/motor units, a Parker hydraulic unit and one mechanical hydraulic control/drive assembly marked HIDRAULIKA”. Hydro-Pack code: P10100SF131 Hydro-Pack serial numbers: 24.01.647636 and 22.23.97423 Quantity: Approximately 3 hydraulic pump/motor units, 1 Parker hydraulic unit and 1 Hidraulika control/drive assembly Hydro-Pack features: Splined shafts, threaded hydraulic ports and mounting flanges Additional components: Associated shafts and couplings may be included Approximate dimensions of main unit: 450 x 280 x 300 mm Approximate weight of main unit: 35 kg The components are offered in used condition after outdoor storage. The Hydro-Pack housings appear intact, with identification plates, capped ports and splined shafts ...

Marine Inline Sight-Flow Indicators – 2 Units Lot of two bronze/brass inline marine sight-flow indicators for visual inspection of liquid circulation in seawater, cooling-water or pump systems. Each unit has a circular inspection window, bolted cover, opposing hose or pipe connections and an internal flow indicator. Quantity: 2 units Construction: Bronze/brass cast bodies Type: Inline liquid flow inspection glasses Approximate connection sizes: 1½–2 inches and 2½–3 inches Features: Circular inspection windows, bolted covers, hose tails, couplings and mounting feet Approximate dimensions of larger unit: 430 x 260 x 180 mm Approximate total weight: 8 kg The units are offered in used condition with marine oxidation, verdigris, surface dirt and weathering. The inspection windows are scratched, cloudy and dirty. Seals, gaskets, hose clamps and connections require inspection or repla ...

Steel Open-Deck Harbour / Utility Workboat Used compact steel workboat designed for utility, manoeuvring and support operations in sheltered waters. The vessel is equipped with an inboard diesel engine, mechanical fuel injection, shaft propulsion, steering wheel and basic analogue instrumentation. Vessel type: Open-deck harbour / utility workboat Hull: Orange-painted steel Propulsion: Inboard diesel engine with shaft drive Engine configuration: Inline four-cylinder marine diesel Fendering: Heavy-duty rubber protection, including tire-type bow fender Deck equipment: Mooring fittings, rope protection, access hatches, stainless-steel rails and ladder Approximate dimensions: 6,000 x 2,400 x 2,200 mm Approximate weight: 4,000 kg The vessel is offered in used condition with substantial coating wear, corrosion and pitting, particularly around the lower hull and waterline. The deck, fendering, ...

Heavy-Duty Hydraulic Trawl Winch Used marine trawl winch suitable for deploying, retrieving and controlling trawl gear and steel wire rope. The winch is equipped with a large steel wire-rope drum, hydraulic drive, chain-and-sprocket transmission and level-wind mechanism. Machine type: Hydraulic marine trawl winch Drive: Hydraulic motor and gear drive Drum: Large steel drum with steel wire rope Transmission: Chain-and-sprocket drive Level wind: Grooved traversing screw with guide rollers Additional equipment: Bronze-alloy warping head and manual control/locking levers Construction: Fabricated steel side frames and base Approximate dimensions: 2,200 x 1,600 x 1,700 mm Approximate weight: 1,800 kg The winch is offered in used condition with extensive corrosion on the wire rope, shafts, chain drive, fasteners and hydraulic components. The wire rope, hydraulic drive, chain transmission, lev ...

BOCK HGX5/725-4 S Semi-Hermetic Refrigeration Compressor Used semi-hermetic reciprocating refrigeration compressor manufactured by BOCK Kältemaschinen in 2001. The compressor is suitable for industrial refrigeration and cooling applications. Manufacturer: BOCK Kältemaschinen Model: HGX5/725-4 S Serial number: AH18666-006 Year of manufacture: 2001 Electrical supply: 380–420 V Y/YY, 3-phase, 50 Hz Speed: 1,450 rpm at 50 Hz / 1,740 rpm at 60 Hz Displacement: 62.9 m³/h at 50 Hz / 75.5 m³/h at 60 Hz Maximum current: 37.0 A Maximum pressure: LP/HP 19/25 bar Protection: IP54 Oil: SE55 Approximate dimensions: 1,600 x 900 x 800 mm Approximate weight: 350 kg The compressor is offered in used condition with visible surface oxidation and weathering from outdoor storage. Auction-ID: A7-50995-4

Heavy-Duty Black Braided Marine Rope Lot Large lot of heavy black braided synthetic ropes stored in multiple pallet-sized piles. Suitable for commercial fishing, aquaculture, non-critical mooring, fendering, agricultural and general marine applications. Rope type: Braided synthetic marine rope Colour: Black Approximate diameter: 25–50 mm Storage: Multiple piles on pallets Approximate dimensions of complete lot: 2,400 x 1,800 x 1,200 mm Approximate total weight: 700 kg The ropes are offered in used condition with surface fuzzing, abrasion, dirt, vegetation contamination, weathering and localized fraying from previous use and outdoor storage. Individual lengths, exact material, breaking load and load certification are not specified. The lot is not represented as suitable for safety-critical lifting or certified mooring applications. Auction-ID: A7-50995-7

Heavy-Duty Marine Wire-Rope Winch Used commercial marine winch suitable for hauling trawl equipment, fishing nets, ropes and other heavy lines. The winch is equipped with a large single steel drum, multi-layer steel wire rope, reduction gearing, powered drive and mechanical band brake. Machine type: Marine/fishing wire-rope winch Application: Trawl, net and gear hauling Drive: Powered drive with reduction gearbox Drum: Single steel wire-rope drum Rope: Multi-layer steel wire rope included Brake: External mechanical band brake with manual lever Approximate dimensions: 1,500 x 1,000 x 1,100 mm Approximate weight: 750 kg The winch is offered in used condition with significant corrosion on the wire rope, drum flanges, brake mechanism, fasteners and structural frame. The rope termination is heavily weathered. The wire rope, brake lining, gearbox, bearings and drive require professional insp ...

Lot of Three Hydraulic Drive Components Lot comprising three heavy industrial hydraulic drive components with cast housings, hydraulic ports, control sections and splined shafts. Quantity: 3 units Identified manufacturer: Mekior / Hidro-Bat Identified model: 6R070MHP/20 Additional marking: C8C/3C00 Serial number: MHP000121 Additional number: 201129897 Configuration: Hydraulic motor/drive component with splined shaft Condition: Used, untested, suitable for repair or parts Approximate dimensions: 600 × 400 × 450 mm Approximate weight: 110 kg The components show surface oxidation, paint deterioration and storage wear. Shaft areas have been protected with tape, while several hydraulic ports and interfaces are exposed. The main housings appear intact, but internal hydraulic condition, pressure performance and serviceability have not been verified. Auction-ID: A7-50995-29

MWM Six-Cylinder Diesel Generator Set Open-frame stationary diesel generator set comprising an MWM inline six-cylinder diesel engine directly coupled to an AC alternator. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Fuel system: Individual mechanical fuel-injection elements and lines Cooling: Liquid-cooled Equipment: Dry-type air cleaner, dual fuel filters, starter, charging equipment, cooling system and separate control panel Monitoring: Carlo Gavazzi Mini TOL 122B alarm and monitoring unit Hour counter: Approximately 3,168 hours, photo-indicated Condition: Used, stored outdoors Approximate dimensions: 2,600 × 1,050 × 1,500 mm Approximate weight: 2,200 kg The generator set appears substantially complete but shows widespread corrosion, oxidation, dirt, biological debris, aged hoses and weathered wiring. Portions are wrapped for storage, and modified electrical e ...

Frigotecnica FT 2800 S Flake-Ice Maker Used industrial flake-ice maker with a production capacity of approximately 2,600–2,900 kg per 24 hours. The unit is designed for use with a separate refrigeration and condensing system. Manufacturer: Frigotecnica Model: FT 2800 S Production date: 05/2019 Serial number: 3411 Ice production: 2,600–2,900 kg/24 h Electrical supply: 220/380 V, 50 Hz Gearmotor: 0.11 kW Machine weight: 140 kg Approximate dimensions: 1,800 x 850 x 1,000 mm The flake-ice evaporator is offered in used condition with visible oxidation, corrosion around refrigeration connections, deteriorated pipe insulation and disconnected electrical connections. Refrigeration and condensing equipment is required for operation. Auction-ID: A7-50995-5

Palfinger Marine PK 12080 MB S1.2 Hydraulic Knuckle-Boom Crane Used marine hydraulic knuckle-boom crane suitable for lifting and handling loads. The crane is equipped with a folding articulated boom, hydraulic extension sections, hydraulic cylinders, hoses, control valves, operating levers and a wire-rope winch assembly. Manufacturer: Palfinger Marine Model: PK 12080 MB S1.2 Year of manufacture: 1999 Serial number: Approximately 054092 Drive: Hydraulic Safe working load marking: 0.6 t Approximate dimensions: 4,300 x 1,600 x 2,200 mm Approximate weight: 1,500 kg The crane is offered in used condition as an untested project unit. Significant corrosion, paint loss and weathering are visible around the base, slew area, pins, fittings, hoses and exposed steel components. Hydraulic cylinders, hoses, valves, slew mechanism, winch and boom extensions require inspection and testing before opera ...

Frascold S 15 56 Y Compressor with ROEN EST Heat Exchanger Used refrigeration package comprising a Frascold semi-hermetic reciprocating compressor and a ROEN EST shell-and-tube heat exchanger, suitable for industrial cooling and refrigeration systems. Compressor manufacturer: Frascold Compressor model: S 15 56 Y Compressor serial number: 3D000224 Motor rating: 11 kW / 15 hp Electrical supply: 380–420 V, 3-phase, 50 Hz Maximum running current: Approximately 31 A Displacement: 56 m³/h at 50 Hz / 67.2 m³/h at 60 Hz Speed: 1,450 rpm at 50 Hz / 1,740 rpm at 60 Hz Maximum pressure: 30 bar discharge / 20.5 bar suction Heat exchanger manufacturer: ROEN EST Heat exchanger model: RX.168.1.700.4.DN40.1H.MAR Heat exchanger serial number: 21860 Heat exchanger year: 2018 Shell/tube design pressure: 35 / 10 bar Shell/tube test pressure: 50.1 / 14.3 bar The equipment is offered in used condition w ...

Fassi F115A.0.23 E-ACTIVE Hydraulic Knuckle-Boom Crane Used Fassi articulating hydraulic loader crane suitable for lifting, positioning and handling loads. The crane is equipped with multiple hydraulic boom sections, hydraulic cylinders, electronic controls, radio remote control and attached hydraulic hoses. Manufacturer: Fassi Gru S.p.A. Model: F115A.0.23 E-ACTIVE Year of manufacture: 2019 Serial number: 1503-2196 Electrical system: 24 V Crane type: Hydraulic articulating / knuckle-boom crane Controls: Fassi electronic control system and fixed control panel Remote control: Fassi radio remote handset with display and emergency stop Approximate dimensions: 4,200 x 1,500 x 2,100 mm Approximate weight: 1,300 kg The crane is offered in used condition with surface corrosion, paint deterioration and wear around fittings, pins and exposed components. The crane has been removed from its origin ...

Commercial Fishing and Aquaculture Nets with Floats Mixed lot of commercial fishing and aquaculture nets, seine-net components, float lines, ropes, synthetic floats and covers. The lot includes bundled netting in red, burgundy and black colours, together with heavy perimeter ropes and numerous yellow and white oval floats. Lot type: Commercial fishing and aquaculture netting Float markings: NYC 8 – Made in Korea” and SANYOUNG S3N” Materials: Synthetic netting, braided ropes and plastic floats Included items: Seine nets, float lines, ropes, floats, cylindrical buoys and covers Approximate lot dimensions: 4,000 x 3,000 x 1,800 mm Approximate total weight: 800 kg The lot contains a substantial quantity of commercial-scale netting and floats suitable for fish containment, harvesting, seine fishing and aquaculture operations. The floats are supplied as part of the net a ...

Electric Marine Capstan / Warping Winch Heavy-duty electrically driven vertical capstan winch designed for hauling and tensioning ropes, net lines and other marine equipment. The unit is equipped with a vertical warping head, reduction gearbox, electric motor and welded steel base. Machine type: Electric marine capstan winch Capstan head height: Approximately 300 mm Estimated capstan head diameter: Approximately 450–550 mm Drive: Electric motor with reduction gearbox Controls: Local three-button pendant control Approximate dimensions: 1,300 x 900 x 1,100 mm Approximate weight: 450 kg The winch is offered as a restoration project in poor used condition. Extensive corrosion, deteriorated paint and weathering are visible across the capstan head, gearbox housing, motor mounting area and base. Structural steel around the support and base shows advanced corrosion and apparent perforation.  ...

MWM Inline Six-Cylinder Turbocharged Diesel Engine Large MWM marine/industrial diesel engine with mechanically governed fuel injection, liquid cooling and charge-air intercooling. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Induction: Turbocharged with charge-air cooler Fuel system: Mechanical injection with six high-pressure injection lines Equipment: Injection pump, turbocharger, charge-air cooler, starter, alternator, filters, cooling system, pipework and flywheel/coupling assembly Charge-air cooler: Ladeluftkühler by Motorenfabrik Langenstein & Reichert GmbH & Co. KG Condition: Used, stored outdoors Approximate dimensions: 2,200 × 1,100 × 1,450 mm Approximate weight: 2,500 kg The engine appears substantially complete but shows surface corrosion, oxidized fittings, deteriorated paint and weathering from prolonged storage. Some openings are protected ...

Heavy-Duty Marine Capstan / Mooring Winch Used marine capstan winch with a vertical warping head mounted on an enclosed steel gearbox housing. Suitable for handling mooring, towing and auxiliary marine ropes. Machine type: Marine capstan / mooring winch Configuration: Vertical warping head with enclosed gearbox Controls: Top-mounted handwheel for brake or clutch adjustment Housing: Heavy bolted inspection and gearbox cover Features: Lifting eye and steel gearbox housing Approximate dimensions: 1,500 x 1,100 x 1,100 mm Approximate weight: 900 kg The winch is offered in used condition with significant corrosion, rust staining, coating deterioration and weathering from outdoor storage. The gearbox, brake or clutch mechanism, bearings and drive components require inspection before operation. Auction-ID: A7-50995-13

Heavy-Duty White Braided Marine Rope Lot Large lot of used off-white braided synthetic marine ropes stored on wooden pallets. The lot includes continuous rope coils and shorter pre-cut rope assemblies or loops secured with black cord. Suitable for general marine, fishing, aquaculture, handling and non-critical mooring applications. Rope type: Braided synthetic marine rope Colour: Off-white Approximate diameter: 20–30 mm Storage: Coils and rope assemblies on wooden pallets Approximate dimensions of complete lot: 2,400 x 1,200 x 1,000 mm Approximate total weight: 450 kg The ropes are offered in used condition with dirt, green biological staining, weathering, surface fuzzing, abrasion and localized fraying from outdoor storage and previous use. The lot is not represented as certified for lifting or safety-critical mooring applications. Auction-ID: A7-50995-8

Iveco AIFO Marine Diesel Engine with ZF Marine Transmission Used marine diesel engine assembly equipped with a ZF marine transmission. The engine includes twin MANN W 1170/7 oil filters, a Bosch 24 V electronic control module, turbocharger, intake and exhaust system, hoses and associated pipework. Manufacturer: Iveco AIFO Engine type: Marine diesel engine Oil filters: 2 x MANN W 1170/7 Control system: Bosch 24 V electronic control module Transmission manufacturer: ZF Transmission part list number: 3215004655 Transmission ratio: 2.07 Transmission oil: SAE 30, approximately 7.0 l Clutch oil pressure: 20 Approximate dimensions: 1,800 x 1,100 x 1,300 mm Approximate weight: 1,200 kg The engine and transmission are offered in used condition with visible surface corrosion, weathering, paint deterioration and wear on hoses and pipework. The engine, gearbox, control system and associated compon ...

Stainless-Steel Vibrating Fish Grader / Size-Sorting Table Used powered stainless-steel aquaculture fish grader designed to separate fish by size as they move across parallel grading bars or channels. The machine is equipped with removable grading screens or grate panels with different bar spacings. Machine type: Vibrating grading / sorting table Vibration motor: OLI electric vibrator Vibrator type: Approximately MVE 500/1N-50A0 / Type 50/10-500 Indicated centrifugal force: Approximately 500 kg Electrical system: Three-phase vibrator with IP66 protection Features: Stainless-steel frame and hopper, spring isolation mounts, removable grading decks, electrical cabling and wash-down hose arrangement Approximate dimensions: 3,000 x 1,300 x 1,400 mm Approximate weight: 650 kg The machine includes multiple removable grading sections with different bar spacings. The grading  ...

: 2500/1250 length: 2500 mmwidth: 1250 mm: 4000 kgheight: 500 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions of the machine ca.: 3 x 1 ,25 x 0,5 mHeavy-duty trailer- Solid rubber tires- Dual steeringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Pumping system not included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-36

- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4

- Total installed power 120 KW. - Drum diameter 3600 mm. - Maximum sand/metal capacity 110 t/h. - Rotation speed 2.30 rpm. - Water consumption 120 litres/min. - Includes: - GENERAL KINEMATICS SYNCROCOIL vibratory conveyor. - 2 outbound conveyor belts. - Hammer breaker unit equipped with 4 hydraulic grapples. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-5

- Vertical partition core blower. - Total installed power 21 KW. - Blowing capacity 16 litres. - Air tank capacity 200 litres. - Includes transfer table and 2 unloading and palletizing robots. - HINE 13-11619 hydraulic unit. - LÜBER LW-FDA-1640 gasification unit. - The screens of the 2 control panels are missing. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-14

- This equipment was part of the production line associated with the GOJAIN EQUIPMENT - 2005 foundry sand plant, available separately under batch number A7-50548-1. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-7

- Industrial equipment for the manufacture of cast iron cores. - Installed assembly with control panel and auxiliary elements including a Rexroth hydraulic group. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-15

- Mobile sand dosing station for machería. - System consisting of two upper sand storage hoppers. - Travel trolley on rails for feeding several machines. - Motorized movement between working positions. - Timed dosing system. - Includes raised metal structure for support and access. - Electrical panel with SIEMENS SIMATIC HMI display and SIEMENS PLC automation. - Application for automatic feeding of foundry core manufacturing machines. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-9