outras máquinas e instalações usadas para venda (22,010)

- Industrial equipment for the manufacture of cast iron cores. - Installed assembly with control panel and auxiliary elements including a hydraulic group. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-17

- The conveyor belt has a metal support structure. - The installation includes an electrical panel and control elements. - Manual operation - Belt width: 1000mm - The scissor lift table shown in some photographs IS NOT included in the lot. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-13

- Total installed power: 60 KW. - Production capacity: 555 untapped moulds / 485 mapped moulds. - Maximum cool-down time: 48 min. - Maximum sand consumption: 110 Tons/h. - Weight of the pieces: from 0.50 kg to 20 kg. - A cooling line consisting of a DISA SBC-2306 belt conveyor with an approximate length of 52000 mm is included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-2

- Automatic horizontal molding line for green sand casting. - Production capacity up to 120 moulds/hour. - Sand consumption 72 Tons/h. - Weight of the pieces: from 20 kg to 100 kg. - Includes: - SEIATSU ACE 5 automatic molding machine (air stream and high-pressure pressing). - Molding box size: 900 × 700 × 230/230 mm. - Nominal production of the molding machine: up to 140 full molds/hour. - Automatic model change. - Hydraulic system and programmable electronic control. - Manual placement line for taps and hammers. - Automatic mold closing system. - 3 ton casting bucket with automatic checkweighing system. - Transport of moulds by means of trolleys on rails. - 5 cooling lanes with capacity for 36 molds each. - 3 streets with forced ventilation and 2 streets with natural ventilation. - Automatic track change transferors. - Rotary trommel for demoulding and sand separatio ...

- Complete installation for the preparation and recovery of sand for foundry. - It consists of: - Various feeding and return conveyor belts. - Polygonal sieve. - FELEMAMG SF-RCP permanent magnet magnetic separator. - Bucket elevator, capacity approximately 200,000 kg/hour. - 3 silos for return sand storage, diameter 4000 mm, approximate capacity of each silo 65 m³. - 4 silos for additives with a diameter of 2000 mm, approximate output 8 m³/hour. - Lung hopper. - 3 material reception silos (coal, bentonite and new sand), diameter 3000 mm, capacity approximately 42 m³ each. - DISA SAM 16-180S mixing mill: year of manufacture 2005, serial number 16.180.18.019, load capacity 5,000 kg, cycle 180 sec. - Fine aspiration. - The sand cooler that appears in a photograph IS NOT included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnectio ...

Technical data Manufacturer: VOITH Type: Roller Grinding Machine Year of Make: 1980 Serial Number: 256 Grinding length: max. 8,000 mm Configuration Suction 2 mounting fixtures for steady rests Grinding emulsion processing, Fabr. NEUHÄUSER Auction-ID: A7-50461-29

Technical data Manufacturer: WOHLENBERG Type: V1250 Year of Make: 1980 Serial Number: D4195 Grinding length: 8,000 mm Spindle Passage: 100 mm Face plate: Ø 1,000 mm Control: Siemens Sinumerik PLC Configuration Tailstock Bezel Face Plate Control panel with touchscreen Suction Auction-ID: A7-50461-28

Class IIA medical device. The unit switches on as expected. All three vacuum pumps are fully functional and can be controlled via the control panel. See images for technical specifications. It shows some signs of wear but is in excellent condition. There is an additional display, the functionality of which is unknown. The door lock has been removed.

2016~3,360 hours (seller estimate: 20 cycles of 7 days each)All cables and connectors

Automated Nucleic Acid Extraction System (DNA/RNA purification)Magnetic bead technology (automated magnetic-bead separation)No (control PC and chemagic software not included)3 Calibration Plates

Incubator Shaker (stackable benchtop shaking incubator)2 units in a stacked configuration (photographed together)

- Power: 4000 KW. - Turbine speed: 8700 rpm. - Inlet steam pressure: 40 bar. - Outlet steam pressure: 3 bar. - Exhaust vapour pressure: 0.1 bar. - Inlet steam temperature: 400°C. - LEROY-SOMER LSA 56 BUL85-4P generator: capacity 4000 KW. - Reducer: SEISA HDS050T . - Gearbox serial number: 00-7K1180 . - Year of gearbox: 2000 . - Reduction ratio: 1/5.806. - Lubrication: ISO VG32. - Rated power of gearbox: 3500 kW. - Input speed: 8700 rpm. - Output speed: 1500 rpm. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-17

- Shredding line for the treatment of recycled wood, pallets and industrial waste. - Includes: • Feed hopper with metal chain conveyor for material loading. • CASSEL metal removal system. • HAMMEL NZ-S 1000 D shredder: motor power 250 KW-1485 rpm, rotor diameter 1000 mm, rotor length 1500 mm, 72 knives, control panel. • Conveyor belts marked with a red X in photo number 3 are not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-1

- Complete wet gas purification system designed for the removal of fine particles. - Flow rate of gases to be treated 105,000 Nm³/h. - Operating temperature 70°C. - Design temperature 99 °C. - Operating pressure: –0.025 / +0.1 barg. - Main components included: • Main wet electrofiltration tower, equipped with perimeter platforms, stairs and railings. • Water and sludge separation system. • KRAFTPOWER transformer with GBQE 80/3500 Micro. • Auxiliary filter for pre-filtering of coarse particles before entering the electrofilter. • FIDIA electrical control panel, with PLC and touch screen for monitoring operating parameters. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention,  ...

- Chipping line for the treatment of natural wood. - Includes: • Feed hopper with inclined metal belt, for loading wooden pieces. • Vibratory load conveyor belt. • PALLMANN PHT 660 x 1050 chipper: main motor power 735 KW-992 rpm, rotor rotation speed 306 rpm, rotor diameter 2000 mm, rotor with 4 knives, feeding speed 38.60 m/min, chip thickness 31.50 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-2

- Power: 3500 KW. - Turbine speed: 8700 rpm. - Inlet steam pressure: 40 bar. - Outlet steam pressure: 3 bar. - Exhaust vapour pressure: 0.1 bar. - Inlet steam temperature: 400°C. - LEROY-SOMER LSA 56 BL65-4P generator: capacity 3500 KW. - Reducer: SEISA HDS050T . - Reduction ratio: 1/5.806. - Lubrication: ISO VG32. - Rated power of gearbox: 3500 kW. - Input speed: 8700 rpm. - Output speed: 1500 rpm. - Industrial steam installation with insulated pipes and valves. - Used for the generation of combined heat and electricity (cogeneration). - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: ...

For sale real estate compendium located in the Municipalities of Cartoceto and Colli al Metauro (PU), consisting of production buildings and agricultural land mainly used for wine and olive growing. The complex includes a company building with cellar, processing and storage rooms, sales point, tool shed, technical rooms and large appurtenant courtyards, for a total commercial area of about 964 square meters (as per the evaluation report). The winery, set in a prestigious hilly context, enjoys a suggestive panoramic view of the surrounding hills and the Adriatic Sea, in the stretch between Pesaro and Fano, an element of particular interest also from a wine tourism and accommodation point of view. The agricultural land extends between vineyards, olive groves, arable land, meadows and wooded portions, for a total area of more than 10 hectares, in an area dedicated to wine and oil prod ...

Manufacturer: Waters Model: SYNAPT G2-S Instrument Type: High Definition Mass Spectrometer Technology: Q-TOF / Ion Mobility Year of Construction:2015 Description: The SYNAPT G2-S combines high-resolution mass spectrometry with additional ion mobility separation and has been used for proteomics and the characterization of complex molecules, among other applications. Condition: - All four device circuits can be switched on - No further functional testing was performed. - No control PC included - No accessories included - LockSpray Source missing. - Switching valves are missing - Dent on the back of the device - Right side panel is a bit loose. - Normal scratches and signs of wear are present Otherwise, it is in good used condition. Testing Status: POWER ON TESTED / NOT FULLY TESTED Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Siemens Year of manufacture: June 17, 2024 Machine type: Laboratory analyzer Model: Atellica CI1900 with Rack handler Maintenance history: Currently up and running and under a Performance Standard (former TOP) service contract with Siemens Find more here - .ucymachines/ Contact us at - sales@ucymachines