outras máquinas e instalações usadas para venda (22,010)

Iveco AIFO Marine Diesel Engine with ZF Marine Transmission Used marine diesel engine assembly equipped with a ZF marine transmission. The engine includes twin MANN W 1170/7 oil filters, a Bosch 24 V electronic control module, turbocharger, intake and exhaust system, hoses and associated pipework. Manufacturer: Iveco AIFO Engine type: Marine diesel engine Oil filters: 2 x MANN W 1170/7 Control system: Bosch 24 V electronic control module Transmission manufacturer: ZF Transmission part list number: 3215004655 Transmission ratio: 2.07 Transmission oil: SAE 30, approximately 7.0 l Clutch oil pressure: 20 Approximate dimensions: 1,800 x 1,100 x 1,300 mm Approximate weight: 1,200 kg The engine and transmission are offered in used condition with visible surface corrosion, weathering, paint deterioration and wear on hoses and pipework. The engine, gearbox, control system and associated compon ...

Stainless-Steel Vibrating Fish Grader / Size-Sorting Table Used powered stainless-steel aquaculture fish grader designed to separate fish by size as they move across parallel grading bars or channels. The machine is equipped with removable grading screens or grate panels with different bar spacings. Machine type: Vibrating grading / sorting table Vibration motor: OLI electric vibrator Vibrator type: Approximately MVE 500/1N-50A0 / Type 50/10-500 Indicated centrifugal force: Approximately 500 kg Electrical system: Three-phase vibrator with IP66 protection Features: Stainless-steel frame and hopper, spring isolation mounts, removable grading decks, electrical cabling and wash-down hose arrangement Approximate dimensions: 3,000 x 1,300 x 1,400 mm Approximate weight: 650 kg The machine includes multiple removable grading sections with different bar spacings. The grading  ...

: 2500/1250 length: 2500 mmwidth: 1250 mm: 4000 kgheight: 500 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions of the machine ca.: 3 x 1 ,25 x 0,5 mHeavy-duty trailer- Solid rubber tires- Dual steeringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Pumping system not included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-36

- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4

- Total installed power 120 KW. - Drum diameter 3600 mm. - Maximum sand/metal capacity 110 t/h. - Rotation speed 2.30 rpm. - Water consumption 120 litres/min. - Includes: - GENERAL KINEMATICS SYNCROCOIL vibratory conveyor. - 2 outbound conveyor belts. - Hammer breaker unit equipped with 4 hydraulic grapples. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-5

- Vertical partition core blower. - Total installed power 21 KW. - Blowing capacity 16 litres. - Air tank capacity 200 litres. - Includes transfer table and 2 unloading and palletizing robots. - HINE 13-11619 hydraulic unit. - LÜBER LW-FDA-1640 gasification unit. - The screens of the 2 control panels are missing. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-14

- This equipment was part of the production line associated with the GOJAIN EQUIPMENT - 2005 foundry sand plant, available separately under batch number A7-50548-1. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-7

- Industrial equipment for the manufacture of cast iron cores. - Installed assembly with control panel and auxiliary elements including a Rexroth hydraulic group. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-15

- Mobile sand dosing station for machería. - System consisting of two upper sand storage hoppers. - Travel trolley on rails for feeding several machines. - Motorized movement between working positions. - Timed dosing system. - Includes raised metal structure for support and access. - Electrical panel with SIEMENS SIMATIC HMI display and SIEMENS PLC automation. - Application for automatic feeding of foundry core manufacturing machines. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-9

- Industrial equipment for the manufacture of cast iron cores. - Installed assembly with control panel and auxiliary elements including a hydraulic group. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-17

- The conveyor belt has a metal support structure. - The installation includes an electrical panel and control elements. - Manual operation - Belt width: 1000mm - The scissor lift table shown in some photographs IS NOT included in the lot. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-13

- Total installed power: 60 KW. - Production capacity: 555 untapped moulds / 485 mapped moulds. - Maximum cool-down time: 48 min. - Maximum sand consumption: 110 Tons/h. - Weight of the pieces: from 0.50 kg to 20 kg. - A cooling line consisting of a DISA SBC-2306 belt conveyor with an approximate length of 52000 mm is included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-2

- Automatic horizontal molding line for green sand casting. - Production capacity up to 120 moulds/hour. - Sand consumption 72 Tons/h. - Weight of the pieces: from 20 kg to 100 kg. - Includes: - SEIATSU ACE 5 automatic molding machine (air stream and high-pressure pressing). - Molding box size: 900 × 700 × 230/230 mm. - Nominal production of the molding machine: up to 140 full molds/hour. - Automatic model change. - Hydraulic system and programmable electronic control. - Manual placement line for taps and hammers. - Automatic mold closing system. - 3 ton casting bucket with automatic checkweighing system. - Transport of moulds by means of trolleys on rails. - 5 cooling lanes with capacity for 36 molds each. - 3 streets with forced ventilation and 2 streets with natural ventilation. - Automatic track change transferors. - Rotary trommel for demoulding and sand separatio ...

- Complete installation for the preparation and recovery of sand for foundry. - It consists of: - Various feeding and return conveyor belts. - Polygonal sieve. - FELEMAMG SF-RCP permanent magnet magnetic separator. - Bucket elevator, capacity approximately 200,000 kg/hour. - 3 silos for return sand storage, diameter 4000 mm, approximate capacity of each silo 65 m³. - 4 silos for additives with a diameter of 2000 mm, approximate output 8 m³/hour. - Lung hopper. - 3 material reception silos (coal, bentonite and new sand), diameter 3000 mm, capacity approximately 42 m³ each. - DISA SAM 16-180S mixing mill: year of manufacture 2005, serial number 16.180.18.019, load capacity 5,000 kg, cycle 180 sec. - Fine aspiration. - The sand cooler that appears in a photograph IS NOT included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnectio ...

Technical data Manufacturer: VOITH Type: Roller Grinding Machine Year of Make: 1980 Serial Number: 256 Grinding length: max. 8,000 mm Configuration Suction 2 mounting fixtures for steady rests Grinding emulsion processing, Fabr. NEUHÄUSER Auction-ID: A7-50461-29

Technical data Manufacturer: WOHLENBERG Type: V1250 Year of Make: 1980 Serial Number: D4195 Grinding length: 8,000 mm Spindle Passage: 100 mm Face plate: Ø 1,000 mm Control: Siemens Sinumerik PLC Configuration Tailstock Bezel Face Plate Control panel with touchscreen Suction Auction-ID: A7-50461-28

Class IIA medical device. The unit switches on as expected. All three vacuum pumps are fully functional and can be controlled via the control panel. See images for technical specifications. It shows some signs of wear but is in excellent condition. There is an additional display, the functionality of which is unknown. The door lock has been removed.

2016~3,360 hours (seller estimate: 20 cycles of 7 days each)All cables and connectors

Automated Nucleic Acid Extraction System (DNA/RNA purification)Magnetic bead technology (automated magnetic-bead separation)No (control PC and chemagic software not included)3 Calibration Plates

Incubator Shaker (stackable benchtop shaking incubator)2 units in a stacked configuration (photographed together)

- Power: 4000 KW. - Turbine speed: 8700 rpm. - Inlet steam pressure: 40 bar. - Outlet steam pressure: 3 bar. - Exhaust vapour pressure: 0.1 bar. - Inlet steam temperature: 400°C. - LEROY-SOMER LSA 56 BUL85-4P generator: capacity 4000 KW. - Reducer: SEISA HDS050T . - Gearbox serial number: 00-7K1180 . - Year of gearbox: 2000 . - Reduction ratio: 1/5.806. - Lubrication: ISO VG32. - Rated power of gearbox: 3500 kW. - Input speed: 8700 rpm. - Output speed: 1500 rpm. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-17

- Shredding line for the treatment of recycled wood, pallets and industrial waste. - Includes: • Feed hopper with metal chain conveyor for material loading. • CASSEL metal removal system. • HAMMEL NZ-S 1000 D shredder: motor power 250 KW-1485 rpm, rotor diameter 1000 mm, rotor length 1500 mm, 72 knives, control panel. • Conveyor belts marked with a red X in photo number 3 are not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-1

- Complete wet gas purification system designed for the removal of fine particles. - Flow rate of gases to be treated 105,000 Nm³/h. - Operating temperature 70°C. - Design temperature 99 °C. - Operating pressure: –0.025 / +0.1 barg. - Main components included: • Main wet electrofiltration tower, equipped with perimeter platforms, stairs and railings. • Water and sludge separation system. • KRAFTPOWER transformer with GBQE 80/3500 Micro. • Auxiliary filter for pre-filtering of coarse particles before entering the electrofilter. • FIDIA electrical control panel, with PLC and touch screen for monitoring operating parameters. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention,  ...

- Chipping line for the treatment of natural wood. - Includes: • Feed hopper with inclined metal belt, for loading wooden pieces. • Vibratory load conveyor belt. • PALLMANN PHT 660 x 1050 chipper: main motor power 735 KW-992 rpm, rotor rotation speed 306 rpm, rotor diameter 2000 mm, rotor with 4 knives, feeding speed 38.60 m/min, chip thickness 31.50 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-2

- Power: 3500 KW. - Turbine speed: 8700 rpm. - Inlet steam pressure: 40 bar. - Outlet steam pressure: 3 bar. - Exhaust vapour pressure: 0.1 bar. - Inlet steam temperature: 400°C. - LEROY-SOMER LSA 56 BL65-4P generator: capacity 3500 KW. - Reducer: SEISA HDS050T . - Reduction ratio: 1/5.806. - Lubrication: ISO VG32. - Rated power of gearbox: 3500 kW. - Input speed: 8700 rpm. - Output speed: 1500 rpm. - Industrial steam installation with insulated pipes and valves. - Used for the generation of combined heat and electricity (cogeneration). - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: ...

For sale real estate compendium located in the Municipalities of Cartoceto and Colli al Metauro (PU), consisting of production buildings and agricultural land mainly used for wine and olive growing. The complex includes a company building with cellar, processing and storage rooms, sales point, tool shed, technical rooms and large appurtenant courtyards, for a total commercial area of about 964 square meters (as per the evaluation report). The winery, set in a prestigious hilly context, enjoys a suggestive panoramic view of the surrounding hills and the Adriatic Sea, in the stretch between Pesaro and Fano, an element of particular interest also from a wine tourism and accommodation point of view. The agricultural land extends between vineyards, olive groves, arable land, meadows and wooded portions, for a total area of more than 10 hectares, in an area dedicated to wine and oil prod ...