prensas: outras usadas para venda (232)

SISTEMA ALTAMENTE AUTOMATIZADO E MODULAR PARA PRODUÇÃO DIGITAL DE LIVROS (inchBOOK ON DEMANDinch) E TIRAGENS CURTAS TECNAU LIBRA 800 Uso pretendido: adequado para embrulhar e processar tiragens curtas e livros individuais ("livros de um") com diferentes tamanhos, números de página e capas Beneficie da edição 1; até 800 cópias por hora Tamanho do livro: mínimo: 100 x 125 mm / máximo A4 Espessura: mínimo: 2 mm / máximo 60 mm Equipamento / informações adicionais: Configuração da linha: 1. Alimentação a partir do rolo: desenrolador, fusão, máquina de corte Dupla e estação de montagem de livros para a produção de blocos de livros com impressão de 2 painéis 2. Alimentador de folhas: Um número variável de folhas soltas pode ser adicionado ao bloco de livros como inserções. As folhas devem ter o mesmo tamanho e circulação que o bloco de livros para serem ...

BALANÇA DE PRECISÃO M. N.º: WD080052457 Equipamento / informações complementares: Máx: 36kg/d=10g

MÁQUINA DE IMPRESSÃO DIGITAL DE ETIQUETAS Rolo máximo de suporte: 450 mm Largura máxima do suporte: 320 mm Rolo máximo da etiqueta: 310 mm Comprimento máximo da etiqueta: 1200 mm Espessura máxima do suporte: 0,3 mm

IMPRESSORAS DE CÓDIGO DE BARRAS / IMPRESSORAS DE ETIQUETAS

Sistema de impressão a jato de tinta com sistema Secure Track and Trace TTS. Um sistema de marcação e verificação para as caixas dobráveis correspondentes (frente e verso). Máquina incluindo controle SIEMENS tipo Simatic S7-1200, impressora REA-Jet HR pro, etc.

IMPRESSORAS DE CÓDIGO DE BARRAS / IMPRESSORAS DE ETIQUETAS Equipamento / outras informações: Método de impressão: Transferência térmica / Termodirect Resolução: 203 dpi, 300 dpi ou 600 dpi Velocidade de impressão: 200 mm/seg (203 dpi), 152 mm/seg (300 dpi) Largura máxima de impressão: 116 mm Interfaces: USB 2.0, RS232, Ethernet 10/100 Base T, Interface master 2x USB, ranhura para cartão de memória CompactFlash

M. No.: 618371 Equipamento / outras informações: Balanças mecânicas de papel Schiltknecht Zurique F. No: 8351

Número : 8752 Tipo: G3521 Produtor: SOMA Criado: 1995 Parâmetros: A conversão para uma tipografia teve lugar por volta de 1995.

Número : 8433 Tipo: F190 CR Produtor: Stratasys Gerado: Parâmetros: Âmbito de fornecimento: PC com software Secador de filamentos Máquina de lavar roupa para remover o material de suporte Aspirador de filamentos Cabeças de impressão e almofadas Número de bobinas de filamento

Número : 8326 Tipo: STAR G2 Produtor: SPS VITESSA Criado: 2003 Parâmetros: Tamanho máximo do formato: 102 x 72 mm Equipamento: Túnel de secagem ULTRATERM UV/HAC

N.º : 7474 Tipo: TPX 100 Produtor: Teca-Print Criado: 2006 Parâmetros: Curso vertical: 100 mm Capacidade: 1800 cycl./h Dimensões da máquina: 380 x 762 x 560 mm Peso: 30 kg Componentes da oferta: Base MS250 Mesa transversal KT30 Alimentação Swab

Tabela manual de impressão manual para impressão em papel, cartão, filmes de PVC, acrílico etc. Até um staerke de 10 cm Com contrapeso Tabela de impressão de tela: Massa exterior: L 2395 mm x W 1675 mm x H 800 mm Placa: 1250 mm x 1740 mm 100 x 100 cm Peso: 150 kg Min. quadro de impressão de tela: 50 x 50 mm Quadro de impressão de tela max: 1100 x 1500 mm

Ink cup/doctor ring diameter: 130mm, cliché size: 150 x 300mm, maximum print image size: 84.5 x 84.5mm, print image diameter: 120mm, cycle rate in continuous operation: 480 cycles/h, cycle rate in start stop operation: 450 cycles/h, pad stroke over cliché: 10 to 100mm, pad stroke over workpiece continuously adjustable: 10 to 180mm, maximum pad installation height: 90 to 115mm, printing force: 2900N, speed control: continuously variable, automation interface: D-SUB 37-pin, service interface: Profinet, air consumption: 130NL per cycle, connected load: 1.2kW, control system: Siemens SIMATIC PANEL, length: 1510mm, width: 1692mm, height: 2205mm, weight: 1.68t. Inspection on site is possible.

A Flashforge 3D printer including the associated filament drying and storage unit is available. 1) Industrial FFF-3D printer Flashforge Creator 4A with HT extruder, build volume dimensions X/Y/Z: 400mm/350mm/500mm, layer height range: 0.05mm-0.4mm, printing accuracy: +/-0.2mm, max. printing speed: 200mm/s, max. extruder temperature HS/HT: 360°C/320°C, machine dimensions X/Y/Z: approx. 850mm/700mm/1000mm, weight: approx. 100kg, operating hours: approx. 5600h. 2) Mobile Flashforge filament drying and storage station, max. drying temperature: 120°C, drying chamber dimensions X/Y/Z: 500mm/375mm/200mm, machine dimensions X/Y/Z: approx. 840mm/675mm/600mm, weight: approx. 70kg. Including F extruder, HS extruder, 2x HT extruders and a tool set. The mainboard was replaced at approx. 4378 operating hours. Documentation available. An on-site inspection is possible.

Reference Num.: 4447Brand: HeidelbergType: KSB 40 x 57 cmAvailable: directlyStatus: In productionLocation: Deutschland

A repair-required Summa tangential plotter is available. Media width range: 170mm-1620mm, max. cutting width: 1575mm, max. cutting speed: 800mm/s, material thickness range: 0.05mm-0.25mm, repeatability: +/-0.1mm. Machine dimensions X/Y/Z: approx. 2300mm/550mm/1100mm, weight: approx. 75kg. The cutting head of the machine has an unknown defect. An on-site inspection is possible.

Size: 0x0Equipments:envelope feederbelt deliveryMax. format size: 36.5 x 35 cmMaximum passage width: 36.5 cm

É oferecido um sistema de serigrafia. Este foi amplamente revisto em 2016 e tem sido raramente utilizado desde então.

A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible.

Cutting length: 1700mm, squeegee rubber thickness: 5-10mm, coolant consumption: approx. 0.04l/m, connection voltage: 400V, 50Hz, 3 phases, connected load: 1kW, compressed air connection: 6bar, compressed air consumption: 2.5l/min, length: 2900mm, width: 784mm, height: 1250mm, weight: 430kg. An inspection on site is possible.

5 printing presses, - 1 enamel body, - 6 UV drying (air-cooled), - Rotary stamping press, - GAP Master, - BST video train surveillance, Fully rotary 355.6 mm, Maximum track width: 340 mm, Bagnbreite min.: 120 mm, Track width max.: 340 mm, Maximum track width: 340 mm, Bag width min.: 120 mm

A total of five identical ESC screen printing machines with different years of manufacture are available. Vacuum dimensions X/Y: 405mm/600mm, max. print dimensions X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. frame dimensions X/Y: 700mm/800mm, frame profile range: 25mm-54mm, max. substrate thickness: 300mm, max. cycle output: 800p/h, machine dimensions X/Y/Z: approx. 1250mm/950mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Equipments:1 x feed table, 1 x tube chain conveyor, 1 x mixer1 x water addition, 1 x extruder, 1 x supply air fan,1 x cyclone, 1 x rotary valve, 1 x distributor,1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor,1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag,1 x supply air fan, 1 x belt dryer, 1 x rotary valve,1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer,1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging1 x belt unit, type: BTK 1510-0refurbished 2016

Size: 0x0Equipments: Linotype-Setzmaschine

Size: Equipments:Speed: 4,300 cycles per hourFold types: Letter, Single Fold, Zigzag Fold, DoubJob Memories: 20Folding Capacity: 8 SheetsDocument Feeder Capacity: 325 SheetsMaxi Feeder: 1,200 SheetsEnvelope Capacity Hopper: 500 EnvelopesEnvelope Capacity Side Exit: 500 EnvelopesEnvelope Capacity Power Stacker: 500 EnvelopesSet Thickness: 2.5mmReverse Reading: YesCascade Feeding from all Feeders: YesHigh Capacity Power Stacker: YesDimensions: Depth: 460mm, Height: 920mm, Length: 1Dimensions: Weight: 140 Kg (6 Stations)

A textile screen printing machine Hebbecker including intermediate dryer and drying tunnel for the complete process is available. 1) Textile carousel screen printing machine Hebbecker S-Line-5-8-4040, year of manufacture: 2017, printing units: 5, stations: 8, max. print dimensions X/Y: 400mm/400mm, plate adjustment: +/-80mm, squeegee length: 410mm, machine diameter: approx. 2900mm, machine height: approx. 1900mm. 2) Infrared conveyor dryer M&R Economax D, year of manufacture: 2017, belt width: 610mm, heating chamber length: 1140mm, cooling system: CoolSkin. 3) Intermediate dryer Hebbecker Magic 25, year of manufacture: 2017. Documentation available. An on-site inspection is possible.

A continuous-flow washout machine Glunz & Jensen for washing out and simultaneous gumming of chemistry-free offset printing plates is available. Brushes: 2, max. working width: 851mm, min. plate width: 231mm, min. plate length: 300mm, max. plate length: 1100mm, plate thickness range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1100mm, weight: approx. 130kg. The machine has been cleaned, dismantled and is stored in a dry warehouse. Documentation available. An on-site inspection is possible.

Four identical screen printing machines ESC are available. Rigid material thickness: 200mm, max. print format X/Y: 400mm/600mm, vacuum plate dimensions X/Y: 500mm/700mm, vacuum area dimensions X/Y: 405mm/600mm, max. frame dimensions X/Y: 600mm/940mm, frame profile range: 25mm-47mm, max. print material thickness: 200mm, working height: 960mm, frame lift: 270mm, printing speed range: 125mm-750mm/s, max. cycle rate: 600p/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, working pressure range: 5bar-7bar. Machine dimensions X/Y/Z: approx. 1300mm/1100mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.

A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible.

Size: 360 x 360 mmEquipments:mobile envelope feederformat from 100 x 100 mm to 360 x 360 mmspeed 15000 per/hourssenor controlled for automatic speed adjustmend