outras máquinas para trabalhar madeira usadas para venda (1,437)

Manufacturer: Felder Model: K 940 S Year of Manufacture: 2020 Type of Machine : Circular Saw Electrical Data - Voltage: 400 V - Phases: 3~ - Frequency: 50 Hz - Motor power: 4.0 kW - Current consumption: approx. 9.1 A Technical Specifications - Cutting length (sliding table): 2050 to 3700 mm - Cutting width at rip fence: 800 to 1250 mm - Maximum cutting height: 133 mm - Saw blade diameter: up to 400 mm - Blade speeds: 3500 / 4500 / 5500 rpm - Blade tilt range: 90 to 45 degrees Features - X-Roll format sliding table, maintenance-free and high precision - Cast iron saw unit for smooth and stable operation - Electric height adjustment - Scoring unit approx. 1.1 kW Find more here - / Contact us at -

Manufacturer: Riepe Model: Polisher Year of Manufacture: 2015 Electrical Data - Voltage: 380 V / 50 Hz - Dimensions and Weight - Dimensions (L x W x H): approx. 1013 x 1104 x 1070 mm - Weight: approx. 190 kg Technical Specifications - Through-feed edge polishing machine for high-gloss finish - Transport via roller conveyor - 3 polishing discs arranged at 45 degrees: 1. Hard wax application (first disc) 2. Removal of excess wax 3. High-gloss finish - Manual wax feed (hard wax stick) - Height adjustment for different workpiece sizes - Each polishing disc individually adjustable horizontally and vertically - Quick-change polishing discs Find more here - / Contact us at -

Panel saw Type: WA 8 Manufacturer: Altendorf Year: 2016 Length of the table: 3200 mm Max. saw blade diameter: 400 mm Cutting height: up to 120 mm (depending on the disc) Disc tilt: 0–45° Motor: 5.5 kW (400 V) Pre-cut (pre-cut unit) Aluminum trolley with precise guidance Parallel ruler Angle ruler with stops Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Haas Model: HSZ-R 500 x 1800 Year of Manufacture: 2008 Type of Machine : Wet Hammer Mil Condition : Used Technical Specifications - Rotor diameter: 1300 mm - Machine inlet width: 1800 mm - Screen perforation (as delivered): 16 mm diameter - Number of hammer tools (full complement): 440 pieces - Grinding bars zone 1 (Mahlleisten Ml.1): 54 pieces - Grinding bars zone 2 (Mahlleisten Ml.2): 42 pieces - Total machine weight (including motor): approx. 12,350 kg - Feed trough weight: approx. 1,100 kg - Sound power level (at full load, 5 m distance): 90 dB(A) - Hydraulic unit (hood opening system): 1.5 kW, 230/400 V, 50 Hz Overall Dimensions - Length: 4790 mm - Width: 2700 mm - Height: 4145 mm Find more here - / Contact us at -

circular angle saw for cutting logs Type: D9 Duplex+LH8 Manufacturer: StrojCad Year: 2018 Hours: 10000 mth Logs max: 800 mm Max log length: 8000 mm Saw blade width: 500 mm Max. lumber size: 180/180 mm, in the mode of wide boards 310/180 mm 2x discharge conveyors 1x loading conveyor 1x sorting tipping conveyor Automatic sorting of cuts Machine weight: 19500 kg Centralized lubrication system, dispenser, cabin Machine in good condition, fully functional, under power Find more here - / Contact us at -

Dimensions (L/W/H): 2070x800x2500 mmWeight: 450 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2570x1100x2490 mmWeight: 400 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x800x2500 mmWeight: 400 kgTotal power requirement: 2,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 100 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Type: EDGETEQ S-300 Manufacturer: Homag Year: 2020 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Cutting center Type: Cut 6120 Manufacturer: Holz-Her Year: 2010 Control: HOLZHER CUTCONTROL 2 Cutting length: 4400 mm Max overhang of the saw blade:82 mm Main motor: 11 kW (for discs Ø 350 mm) Independent pre-cutting motor: 2.2 kW Feed speed: continuously adjustable up to 100 m/min Dimensions: 9730 x 6450 x 1650 mm Integrated label printer Air cushion tables for easy handling of heavy plates Machine in good condition, fully functional Find more here - / Contact us at -

Manufacturer: Italpresse Model: PRE46 - 3 14-6X180 Year of Manufacture: 2007 Voltage: 400V Frequency: 50 Hz Hydraulic Oil: AGIP OSO 46 Heating System Oil: AGIP ALARIA 3 Certification: CE Find more here - / Contact us at -

Manufacturer: OTT Model: Strong Edge Year of Manufacture: 2020 Type of Machine : Edge banding machine Find more here - / Contact us at -

Manufacturer: Italpresse Model: BG/660 Year of Manufacture: 2002 Technical Specifications - Control Voltage: 220 V - Operating Voltage: 400 V - Frequency: 50 Hz - Phases: 3+MP+PE - Maximum Power: 108 kW - Maximum Current: 160 A - Cable Cross-Section (Supply): 70 mm2 - Static Load Capacity: 27,500 daN - Dynamic Load Capacity (with tooling): 36,000 daN Find more here - / Contact us at -

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - / Contact us at -

Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: IMA, Type: Compact P/C F 6220, Year: 1996, Control: Imatronic 121, Min-max edge material mm: 14-55, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 8-20, Infeed table: yes, mit Vakuum: 2 X 3 kw, Power per lamp: 1-fach, kW Leistung Laser: yes, Coil magazine: yes, Strip magazin: yes, Bevel milling: MFA. 8.346, radius milling: yes, Magazin : yes nicht schwenkbar, Vertical grooves: R 3 und R 2, Nuten : yes, Radius scraper: yes, Type of scraper: 8.50, Spraying system 2: yes, Edge sanding: Rolle, Buffing unit: Ja, Free places: yes, Year :1996

Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,

Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radius scraper: yes, Servo copying: yes, Spraying system 2: A 20, Ersatzverleimteil : 5 kg, Number of sanding units: yes, Profile sanding top bottom: Einlauf und Auslauf, Barcode: möglich, Workpiece sup ...

Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010