partes elétricas usadas para venda (650)

Cordless pipe cleaner incl. accessories ; used; without battery and charger Dimensions: 600x400x700mm Auction-ID: A7-47086-68

max. Ø 125mm Dimensions: 300x320x160mm Auction-ID: A7-47086-113

Fast charger Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-47249-274

Hydr. Demolition hammer with OQ45-5 holder for carrier devices 5.0-9.0T; used; #07PA0258 Dimensions: 1200x800x700mm Auction-ID: A7-47086-80

Cordless drill/driver in a set with a battery and charger; without suitcase; Used Dimensions: 450x300x150mm Auction-ID: A7-47086-92

Fast charge charger Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-47249-104

Impact drill 705W; in a box; as good as new; #43195603000083M2020 Dimensions. 350x250x120mm Auction-ID: A7-47086-82

Fast charger charger, Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-47249-39

Manufacturer: Sodick Type of Machine : Starting hole drilling machine Model: K1CS-M792 Year of manufacture: presumably 2000 Find more here - / Contact us at -

Auction-ID: A1-46915-278

Manufacturer: KOKI TEC Model: SELBO III 350 Type: Inline selective soldering machine Specifications - Outer dimensions: 2,750 (L) x 1,430 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 350 (W) x 400 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 14 kVA (heater) / 6 kVA (solder pot) - Net weight: 420 kg (fluxer) / 370 kg (heater) / 450 kg (solder pot) Find more here - / Contact us at -

Manufacturer: KOKI TEC Model: SELBO III 5051 Type: Inline selective soldering machine Specifications - Outer dimensions: 3,236 (L) x 1,577 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 500 (W) x 510 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 20 kVA (heater) / 6 kVA (solder pot) - Net weight: 450 kg (fluxer) / 390 kg (heater) / 480 kg (solder pot) Key Features - Improved soldering quality with reduced solder defect rate - Inline automation for labor savings in PCB assembly - Modul ...

Manufacturer: KOKI TEC Series: ULTIMA (TakuROBO Benchtop Type) CE Mark: Registered on all three units System comprises: ULTIMA-TRZ + ULTIMA-SPZ + ULTIMA-PHS Suitable for: Prototype to small and medium volume PCB production ULTIMA-TRZ Selective Soldering Machine - Dimensions (without signal tower): 940 (L) x 885 (W) x 540 (H) mm - Outer dimensions (with signal tower): 940 (L) x 885 (W) x 753 (H) mm - Body dimensions: W620 x L940 x H442 mm - Minimum PCB size: 50 (W) x 50 (L) mm - Maximum PCB size: 250 (W) x 330 (L) mm - PCB thickness: 0.8 to 2.0 mm - Machine weight: approx. 120 kg - Power source: single-phase AC 200V plus/minus 5 percent, 4 kVA - Nitrogen supply: purity 99.99 percent or more, 0.4 to 0.5 MPa, 25 L/min - Solder pot capacity: approx. 16 kg (specific gravity 7.3) - Nozzle range: 17 sizes from diameter 2 to diameter 20 mm inner diameter, including Aerojet - nozzle - Stand ...

Manufacturer: NeoDen Model: IN8C Type of Machine : Reflow Oven - Heating zones: 8 total (4 upper / 4 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: 3.6 kW - Typical working power: approximately 1.5 kW - Machine dimensions: 1660 x 607 x 1075 mm (L x W x H) - Net weight: 241 kg - Gross weight: 308 kg Standard Accessories Included  ...

Manufacturer: NeoDen Model: IN12C Type of Machine : Reflow Oven Technical Specifications -Heating zones: 12 total (6 upper / 6 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: approximately 4.8 kW - Typical working power: approximately 2.2 kW - Machine dimensions: 2300 x 650 x 1280 mm (L x W x H) - Net weight: 300 kg - Gross weigh ...

The ND56X is designed for R&D; enterprises, laboratories, and quality inspection rooms. It is a fully automatic defect inspection system suitable for a wide range electronic components and precision parts. CE certified and compliant with SEMI S2/S8 semiconductor industry specifications. X-Ray Tube Source Specifications - Type: sealed micro-focus X-ray tube - Voltage range: 40 to 90 kV - Current range: 10 to 200 uA - Maximum output power: 8 W - Micro focus spot size: 15 um Flat Panel Detector Specifications - Type: TFT Industrial Dynamic Flat Panel Detector (FPD) - Pixel matrix: 768x768 to 1536x1536 - Field of view: 65x65 to 130x130 mm - Resolution: 5.8 Lp/mm - Frame rate (1x1): 20 to 40 fps - A/D conversion: 16 bits Key Features and Functions - Automatic defect detection: size, area, broken wire, bridging and more - Customizable software algorithms: Y/N, crack, broken wir ...

Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa ...

Manufacturer: NeoDen Model: YY1 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Machine style: single gantry with 2 heads - Alignment: vision and vacuum - Placement rate (vision on): 3,000 CPH - Placement rate (vision off): 4,000 CPH - Feeder capacity - tape feeder: 52 positions (all 8mm) - Feeder capacity - stick feeder: 4 - Feeder capacity - flexible feeder: 28 - Feeder capacity - bulk feeder: 19 - Nozzle change capacity: 3 nozzles - Component range - smallest: 0201 - Component range - largest: 18x18 mm - Maximum component height: 12 mm - Rotation: +/- 180 degrees - Placement accuracy: +/- 0.02 mm - X-Y repeatability: +/- 0.02 mm - Z-axis maximum movement range: 28 mm - PCB size maximum (dual sides tape feeder): 249x350 mm - PCB size maximum (single side tape feeder): 315x350 mm - Electricity supply: AC 100V to 240V ...

NeoDen4, the brand new and long-awaited model of NeoDen, is a desktop Pick and Place machine with vision system.NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201, BGA, QFN and 0.8m/1.2m/1.5m LED strip.NeoDen4 is the best choice to satisfy all demands of high precision, high capacity,stable performance and low cost. Manufacturer: NeoDen Model: 4 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 4 (with vision enabled) - Placement rate: 4,000 CPH - Feeder capacity - tape reel feeders: 48 - Feeder capacity - vibrating feeders: 5 - IC tray capacity: 5 - Component range - smallest: 0201 - Component range - largest: TQFP240 - Maximum component height: 5 mm - Resolution X/Y axis: 0.01 mm - Resolution Z axis: 0.1 mm - Rotation: +/- 180 degrees (360 ...

Manufacturer:NeoDen Model: K1830 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Mounting speed: 16,000 CPH maximum - Number of tape reel feeders: 66 (electric and pneumatic) - Number of IC trays: 10 - Placement area: 540x300 mm (1500 mm optional) - Maximum mounting height: 18 mm - Mark camera recognition system: 2 groups, left and right, US ON sensors - Flying camera recognition system: 2 groups, front and rear, US ON sensors - Operation system: patented SMT Mounting Operation System V1.3 - XY motion feedback control: SPM/IBG magnetic linear encoder - XY drive motor: Panasonic A6 750W servo motor - Repeat position accuracy: 0.01 mm - Compressed air: more than 0.6 MPa, maximum flow rate 37 L/min - Voltage: AC 110V/220V, 50Hz/60Hz - Machine dimensions: 1290x1060x1300  ...

The NeoDen ND1 is a high-precision automatic SMT screen printer designed for professional PCB solder paste printing. With a repeat accuracy of +/- 12.5 micron at 6 sigma and Cp of 2.0 or greater, it delivers the precision and reliability demanded by high-quality electronics manufacturing. Manufacturer: NeoDen Model: ND1 Fully Automatic Vision Printing Machine Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.6 mm to 14 mm - Maximum PCB weight: 10 kg - Transmission speed: 1500 mm/second maximum - Template frame size: 370x470 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: closed-loop print head with straight line motor - Scraper type: steel or rubber scraper, angles 45 / 55 / 60 degrees - Scraper length: 220 mm to 500 mm - Scraper blade thickne ...

The NeoDen ND2 is an advanced SMT automatic screen printer designed for easy operation, high precision, and high stability PCB solder paste printing.With a repeat position accuracy of +/- 10.0 micron at 6 sigma and Cpk of 2.0 or greater, the ND2 delivers superior precision over its predecessor the ND1. Manufacturer: NeoDen Model: ND2 Fully Automatic Visual Printer Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.4 mm to 6 mm - Maximum PCB weight: 3 kg - Transmission speed: 1500 mm/s maximum - Transfer height from ground: 900 +/- 40 mm - Transfer direction: left-right, right-left, left-left, right-right - Template frame size: 470x370 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: floating intelligent printing head with two independent direct  ...

Manufacturer: NeoDen Model: YS350 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 400x240 mm - Printing area: 500x320 mm - PCB fixed system: pin positioning - Frame size: L 550-650 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 900x700x1700 mm (L x W x H) - Net weight: 230 kg - Gross weight: 280 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine thro ...

Manufacturer: NeoDen Model: YS600 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 600x240 mm - Printing area: 700x320 mm - PCB fixed system: pin positioning - Frame size: L 750-850 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 900x700x1700 mm (L x W x H) - Net weight: 265 kg - Gross weight: 310 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine th ...

Manufacturer: NeoDen Model: YS1200 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 1200x240 mm - Printing area: 1300x320 mm - PCB fixed system: pin positioning - Frame size: L 1550-1650 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 1600x700x1700 mm (L x W x H) - Net weight: 300 kg - Gross weight: 350 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fin ...

Manufacturer: Essemtec Model: RO300FC US Year of manufacture: September 2005 Heating zones: 3 Cooling zones: 1 Total zones: 4 Voltage: 208 V Current: 25 A Operating hours: approximately 6,000 Condition: functions excellently Certification: CE marked Find more here - / Contact us at -

Manufacturer: NeoDen Model: IN6 Year of Manufacture: Type of Machine : Reflow Oven Key Technical Specifications - Power supply: 110/220 VAC, 1-phase (household power compatible) - Rated power: 2000 W maximum - Heating zones: 6 total (3 upper / 3 lower) - Heating type: aluminum alloy heating plate with nichrome wire - Cooling zones: 1, with bottom cooling fans at offload section - Conveyor speed: 5 to 30 cm/min (2 to 12 inch/min) - Maximum PCB height: 26 mm - Soldering width: 250 mm - Process chamber length: 680 mm (26.8 inch) - Temperature range: room temperature up to 300 degrees C - Temperature control accuracy: +/- 0.2 degrees C - PCB temperature distribution deviation: +/- 1 degree C - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Machine dimensions: 1020 x 507 x 350 mm (L x W x H) - Packing size: 112 x 62 x 56 cm - Net weight: 49 kg - Gr ...

Manufacturer: Speedprint Model: SP710 Condition : Good Find more here - / Contact us at -

Manufacturer: Nutek Model: NTM530WSXL-1800-3-AW Year of Manufacture: 2010 Machine length: 1800 mm Belt segments: 3 Maximum PCB width: up to 460 mm (XL size) Maximum PCB length: up to 460 mm (XL size) Voltage: 230 VAC, single phase Power: 250 VA Weight: 190 kg CE Certified Find more here - / Contact us at -

Manufacturer: Samco Model: FlexLiner II Year of Manufacture: 2018 Type of Machine : UCP plasma machine The samco-ucp FlexLiner II is a production type plasma cleaning system designed for surface cleaning of various types of leadframe packages. This system operates with a remote plasma source in the downstream process mode. The plasma is generated by RF power in the source and then injected into the process chamber through a shower head. Dimensions: 1,520 mm (W) x 1,410 mm (D) x 2,130 mm (H) Key Features and Benefits - Single substrate production equipment for various types and dimensions of substrates and magazines up to 300 mm x 300 mm - Gentle handling with minimal movement of substrates and magazines - Touchscreen GUI for user-friendly, intuitive operation - Multiple sensor controls for highly reliable operation - High throughput due to simultaneous (un)loading and plasma proce ...