3547 results
similar results found in category conversão de papel: outras
Número do item: 135928792
ES
Peristaltic pump.
Brand Name: DL.
Type: 55
Year: 1998
8, 2M3/h
4 Kw
1420/40 Rpm
10 bar pressure
Dimensions: 1.000 mm wide, 1,000 mm long, 2,000 mm high.
Número do item: 135891098
MCS BEAM DYEING FOR FABRIC, YEAR 1973WORKING WIDTH 2.000 MMMANUAL
PROGRAMMER TIME/TEMPERATURE \ r \ nINTERNAL DIAM. 1.100 MMCAPACITY
2.000 LTWO BEAMS UND ONE TROLLEY
Número do item: 135891096
NOSEDA BEAM DYEING FOR FABRIC, YEAR 1978WORKING WIDTH 3.200
MMTHERMOELETTRONICA PROGRAMMER CT 401nINTERNAL DIAM. 1.100 MMCAPACITY
5.000 LONE BEAM AND ONE TROLLEY
Número do item: 135891091
NOSEDA BEAM DYEING FOR FABRIC, YEAR 1979WORKING WIDTH 3.200
MMTHERMOELETTRONICA PROGRAMMER CT 401nINTERNAL DIAM. 1.100 MMCAPACITY
5.000 LTWO BEAMS UND ONE TROLLEY
Número do item: 135891084
MCS BEAM DYEING FOR FABRIC, YEAR 1970WORKING WIDTH 2.000
MMTHERMOELETTRONICA PROGRAMMER CT 411INTERNAL DIAM. 1.120 MMCAPACITY
3.000 LTWO BEAMS UND ONE TROLLEY
Número do item: 135840410
BETA DYEING PADDER, ROLLER WIDTH 2.100 MM, YEAR 1989-JusING UNIT FULLY
UPGRADED MITH MIXING KITCHEN UND DOSING PUMPIN PERFERCT WORKING
CONDITION
Número do item: 135840409
BETA DYEING PADDER, ROLLER WIDTH 2.100 MM, YEAR 1989
DYEING UNIT FULLY UPGRADED WITH MIXING KITCHEN AND DOSING PUMP
IN PERFERCT WORKING CONDITION
Número do item: 135839981
B&R 2005 PLC SPS CONTROLLER 3BP 152.4
FULL CPU SOLD €3300 VAT NOT INCL.
Status: AS NEW!
Transport (fixed price up to 5kg: 35.49 EUR): Bulgaria, Denmark,
Slovenia, Finland, Greece, Hungary, Ireland, Latvia, Lithuania, Malta,
Poland, Rep. Czech Republic, Romania, Sweden.
NO warranty is provided for this product.
Número do item: 135727756
PT
Mandriladora Scharmann WF 140 Opticut
Drill head with deep hole drilling with TBT drill
Table size 3000 x 2500 mm
X 5500 mm
Y 3000 mm
Z 2300 mm
Digital Heidenhain 3 axes
Nominal drilling Depth: 1500 mm
Drilling Height: 1500 mm
Motor power: 18 kw
Speed: 50-4800 RPM
Maximum speed: 7800 RPM
Spindle Head Bracket: 4 DIN 55021 size
Número do item: 135727173
MCS HT JIGGER DYEING MACHINE, MODEL COMBY, YEAR 1997HIDROLIC
DRIVETERMOELETTRONICA PROGRAMMER
Número do item: 135727172
MCS HT JIGGER DYEING MACHINE, MODEL COMBY, YEAR 1997
DIAMETER 1.100 MM
HIDROLIC DRIVE
TERMOELETTRONICA PROGRAMMER
Número do item: 135727167
OSTHOFF SINGEING RANGE, ROLLER MIT 1.800 MM, YEAR 1983SINGEING UNIT
MIT 2 OSTHOFF BURNERS\DESIZING TANK UND PADDEREXIT BY A-FRAME
BATCHERPREPARATION TANK mit 2 MIXERSDUST UND SPARKS abholung
Número do item: 135727166
OSTHOFF SINGEING RANGE, ROLLER WITH 1.800 MM, YEAR 1983
HIGH ENTRANCE WITH GUIDERS
SINGEING UNIT WITH 2 OSTHOFF BURNERS
BRUSHING
DESIZING TANK AND PADDER
EXIT BY A-FRAME BATCHER
PREPARATION TANK WITH 2 MIXERS
DUST AND SPARKS COLLECTION
Número do item: 135688284
LISA SUEDING MACHINE FÜR KNITS UND WOVEN MODEL 3E-DP, YEAR
2003SUEDING UNIT MIT 3 CARBON BRUSH CYLINDERSEXIT BY FOLDER UND
A-FRAME BATCHERDUST COLLECTOR MIT 7 Ärmel
Número do item: 135688283
LISA SUEDING MACHINE FOR KNITS AND WOVEN MODEL 3E-DP, YEAR 2003
HIGH ENTRANCE WITH BIANCO DOGAL SPREADING DEVICE
ROLLER WIDTH 2.100 MM
SUEDING UNIT WITH 3 CARBON BRUSH CYLINDERS
EXIT BY FOLDER AND A-FRAME BATCHER
DUST COLLECTOR WITH 7 SLEEVES
Número do item: 135688280
CIBITEX SANFOR FÜR WOVEN UND KNITS, YEAR 2002INKING UNIT: RUBBER
WIDTH 1.900 MM, CYLINDER WIDTH 2.400 MM. Mit dem EXISTING RUBBER BELT
DIE WW IS 1.800 MM, INSTALLING A WIDER RUBBER BELT THE WW WILL REACH
UP TO 2.300 MMPALMER FOR FIXATION WITH DRUM DRYER, KONVEYOR BELT FÜR
ACCUMULATION UND COOLING CYLINDEREXIT BY A-FRAME BATCHER
Número do item: 135688279
CIBITEX SANFOR FOR WOVEN AND KNITS, YEAR 2002
ENTRANCE WITH UNWINDING STATION FOR A-FRAME AND CORINO DOGAL SPREADING
DEVICE
STEAMING DRUM
SHRINKING UNIT: RUBBER WIDTH 1.900 MM, CYLINDER WIDTH 2.400 MM. WITH
THE EXISTING RUBBER BELT THE WW IS 1.800 MM, INSTALLING A WIDER RUBBER
BELT THE WW WILL REACH UP TO 2.300 MM
PALMER FOR FIXATION WITH DRUM DRYER, CONVEYOR BELT FOR ACCUMULATION
AND COOLING CYLINDER
EXIT BY A-FRAME BATCHER
Número do item: 135688272
Komplette Zig-Zag-Futterlinie: Für die Zickzack-Bandfütterung, MODEL
AEZD-1300-5-8000/RB, mit Feeder + Streightener + Decoiler in einem
Block, mit folgenden Eigenschaften: \ r-Maximale Breite des Bandes ...
mm 1306-Maximum Riemen Dicke ... mm 5-Maximaler Teil des Bandes, 420
N/mm ... mm ² 1000 x 3.0-Maximaler Teil des Bandes, 420 N/mm ... mm
² 650 x 4.0-Maximaler Teil des Bandes, 420 N/mm ... mm ² 350 x
5.0-Maximales Gewicht der Spule ... 8000 kg-Maximaler
Außendurchmesser der Spule ... 400-Adjustable Dorndur ...
Número do item: 135688271
Complete Zig-Zag feed line: for zig-zag band feeding, MODEL
AEZD-1300-5-8000 / RB, with feeder + streightener + decoiler in a
single block, with the following characteristics:
- Maximum width of the strap ...mm 1306
- Maximum strap thickness . mm 5
- Maximum section of the strap, 420 N / mm .. mm² 1000 x 3.0
- Maximum section of the strap, 420 N / mm .. mm² 650 x 4.0
- Maximum section of the strap, 420 N / mm .. mm² 350 x 5.0
- Maximum weight of the coil ... 8000 kg
- Maximum outside diameter of the co ...
Número do item: 135653096
Husky 1,650 Tonnen Spritzgießmaschine inkl. Roboter TE 14Technische
Details CLAMPING FORCE 16.500 kNPLATEN SIZE 2.520 x 2.120 mmDISTANCE
BETWEEN TIE BARS (h x v) 1.800 x 1.400 mmMIN. MOULD HIGHT 900/1.600
mmDAYLIGHT MAX 3.400 mmSCREW DIAMETER 100 mmINJJECTION PRESSURE 2.20
barINJECTION VOLUMEN 3.927 cm3YEAR OF BUILDING 2002
Número do item: 135653095
Husky 1.650 tons injection moulding machine incl. robot TE 14
Technical details
CLAMPING FORCE 16.500 kN
PLATEN SIZE 2.520 x 2.120 mm
DISTANCE BETWEEN TIE BARS (h x v) 1.800 x 1.400 mm
MIN. MOULD HIGHT 900 / 1.600 mm
DAYLIGHT MAX 3.400 mm
SCREW DIAMETER 100 mm
INJECTION PRESSURE 2.20 bar
INJECTION VOLUMEN 3.927 cm3
YEAR OF BUILDING 2002
Número do item: 135613214
Baujahr: 2012 (nie genutzt) NuevoRoboter Engel, Modell Viper 20 RC 200
für den Einsatz auf Engel-Spritzgießmaschinen mit integriertem
Anschluss. \ r \ n \ r \ nAxis travel = X = 500 mm, Y = 400 + 400 mm
(Tandem), Z = 1.400 mm , C = 0-90 º. \ r \ n \ r \ nDieser Roboter
kann auf Engel-Spritzgießmaschinen eingesetzt werden!
Número do item: 135613213
Year of building : 2012 ( never used ) Nuevo
Summary
Robot Engel, model Viper 20 RC 200 integrated for use on Engel
injection moulding machines with integrated connection.
Axis travel = X = 500 mm, Y = 400 + 400 mm (tandem), Z = 1.400 mm, C =
0-90º.
This robot can be used on Engel injection moulding machines !
Número do item: 135612855
Engel Roboter Viper 20 Speed, kann auf allen
Engel-Spritzgießmaschinen eingesetzt werden. Nur ca. 13.000
Arbeitsstunden X-Achse: 500 mm, Y-Achse 800 mm, Z-Achse 3.320 mm
Número do item: 135612854
Engel robot Viper 20 Speed, can be used on all Engel injection
moulding machines. Only approx. 13.000 working hours
X-axis: 500 mm, Y-axis 800 mm, Z-axis 3.320 mm
Número do item: 135612726
SEPRO Robot 3051 BZ PIB 7843 X = 4.000 mm, Y = 1.200 mm, Z = 2.300 mm
Número do item: 135612490
ENGEL ERC 74/2-E integrated robot built in 2004 with its own
electrical cabinet, machine complete checked.
Número do item: 135612487
Engel 110 Tonnen ungeschaltendes IMM. Diese Maschine hat neue Schraube
und Fass. Maschine wird komplett überprüft und getestet. \ r \ n \ r
\ nTechnische Details INJECTION VOLUMEN 154 cm3WORKING HOURS
65.725\w\ENING 500 mmINJECTION PRESSURE 1.600 bar MOULD HIGHT 250
mmSCREW DIAMETER 35 mmYEAR OF BUILDING 2000CLAMPING FORCE 1.100 kN
Número do item: 135612486
Engel 110 tons tie-bar-less IMM. This machine has new Screw and
barrel. Machine will be delivered complete checked and tested.
Technical details
INJECTION VOLUMEN 154 cm3
WORKING HOURS 65.725
TRAVEL OPENING 500 mm
INJECTION PRESSURE 1.600 bar
MIN. MOULD HIGHT 250 mm
PLATEN SIZE 730 x 600 mm
SCREW DIAMETER 35 mm
YEAR OF BUILDING 2000
CLAMPING FORCE 1.100 kN
Número do item: 135612485
400 Tonnen ENGEL, gebundungsloser Spritzgussmaschine mit integriertem
ENGEL-Roboter. \ r \ n \ n \ nTechnische Details INJECTION VOLUMEN
848cm3SCREW DIAMETER 60mmNOMINAL CAPACITY OF PUMP MOTOR 45 kWTRAVEL
OPENING 950 mmPLATEN SIZE 1.300 x 740 mm \ RCLAMPING FORCE 4.000
kNYEAR OF BUILDING 2002WORKING HOURS 69900DAYLIGHT MAX 1.300 mm MOULD
HIGHT 350 mm
Número do item: 135612484
400 tons ENGEL tie-bar-less injection mouding machine with integrated
ENGEL robot.
Technical details
INJECTION VOLUMEN 848cm3
SCREW DIAMETER 60mm
NOMINAL CAPACITY OF PUMP MOTOR 45 kW
TRAVEL OPENING 950 mm
PLATEN SIZE 1.300 x 740 mm
CLAMPING FORCE 4.000 kN
YEAR OF BUILDING 2002
WORKING HOURS 69900
DAYLIGHT MAX 1.300 mm
MIN. MOULD HIGHT 350 mm
Número do item: 135612483
175 Tonnen Krauss-Maffei-Spritzgießmaschine saniert Neue Dichtungen
in der Spanneinheit. \ r \ n \ r \ nTechnische Details WORKING HOURS
54600SHOTWEIGHT 250grDAYLIGHT MAX 1050mmYEAR OF BUILDING 2002INJECTION
VOLUMEN 275cm3SHOTWEIGHT 1878 barSCREW DIAMETER 45mmDISTANCE BETWEEN
TIE BARS (h x v) 560x560MIN. MOULD HIGHT 350mmTRAVEL OPENING
700mmPLATEN SIZE 915x915rCLAMPING FORCE 1750 kn
Número do item: 135612482
175 tons Krauss-Maffei injection moulding machine reconditioned. New
seals in the clamping unit.
Technical details
WORKING HOURS 54600
SHOTWEIGHT 250gr
DAYLIGHT MAX 1050mm
YEAR OF BUILDING 2002
INJECTION VOLUMEN 275cm3
SHOTWEIGHT 1878 bar
SCREW DIAMETER 45mm
DISTANCE BETWEEN TIE BARS (h x v) 560x560
MIN. MOULD HIGHT 350mm
TRAVEL OPENING 700mm
PLATEN SIZE 915x915
CLAMPING FORCE 1750 kn
Número do item: 135612481
300 Tonnen gebundene IMM im Jahr 2008 mit CC 200-Steuerung gebaut,
integrierter Engel-Roboter ERC 33/2-F, Kran für die Formenbefestigung
(2Tonnen), 16 Heißkanel, Akku für schnelle Einspritzung und
Parallelbewegungen. 2 Kernzieher fixieren platen, Durchflussmesser,
Transportband. Das Plastizisierungs-Schrauben bimetalic. \ r \ n \
nTechnische Details DAYLIGHT MAX 1.300 mmMIN. MOULD HIGHT 400
mmWORKING HOURS 73506INJECTION PRESSURE 1.616/2.053 bar\T. 511
cm3NOMINAL CAPACITY OF PUMP MOTOR 45 kWTRAVEL OPENING 900 mm ...
Número do item: 135612480
300 tons tie-bar-less IMM built in 2008 with CC 200 control,
integrated Engel robot ERC 33/2-F, crane for mould fixing (2tons), 16
hot chanel, accumulator for fast injection and parallel movements. 2
core puller fix platen, flow meter, transport belt. Plastizising screw
bimetalic.
Technical details
DAYLIGHT MAX 1.300 mm
MIN. MOULD HIGHT 400 mm
YEAR OF BUILDING 2008
WORKING HOURS 73506
INJECTION PRESSURE 1.616/2.053 bar
INJECTION VOLUMEN 511 cm3
NOMINAL CAPACITY OF PUMP MOTOR 45 kW
TRAVEL OPENING 900 mm
...
Número do item: 135612479
KRAUSS-MAFFEI KM 350/1900 C1, año 2000. Diese Maschine wird komplett
repariert und getestet geliefert und kann unter Strom gezeigt werden!
Es besteht die Möglichkeit, die Maschine mit dem Roboter Sepro zu
kaufen! Equipment: 6 Kernzieher, Roboterschnittstelle. \ r \ n \ r \ r
\ n \ r \ nTechnische Details CLAMPING FORCE 3.500 kNYEAR OF BUILDING
2000PLATEN SATEN IZE 1.100 x 1.120 mmDISTANCE BETWEEN TIE BARS (h x v)
710 x 710 mm\ Nmin. MOULD HIGHT 530-1.450 mmTRAVEL OPENING 920
mmDAYLIGHT MAX 1.300 mmSCREW DIAMETER ...
Número do item: 135612478
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be
delivered complete checked repaired and tested and can be shown under
power ! Possibility to buy machine with Sepro robot !
Equipment: 6 core-pullers, robot interface.
Technical details
CLAMPING FORCE 3.500 kN
YEAR OF BUILDING 2000
PLATEN SIZE 1.100 x 1.120 mm
DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm
MIN. MOULD HIGHT 530 - 1.450 mm
TRAVEL OPENING 920 mm
DAYLIGHT MAX 1.300 mm
SCREW DIAMETER 60 mm
INJECTION PRESSURE 2.420 bar
INJEC ...
Número do item: 135612471
5 axis-Vertical Machining Center SPINNER Modell U5-620 Serie Nr.
UT0286 (neu im Jahr 2013) ausgestattet mit: Optik,
Spindelgeschwindigkeit 12.000 U/min, Kühlmittel durch Spindel 22 bar,
Werkzeugmagazin für 32 Werkzeuge, 10 Werkzeughalter,
Chip-Fördergelnahmel-Typ, Papierfilter für die Kühlmittelreinigung,
Renishaw-Sonde, Siemens 840DE-SL Control, Handbücher.
Número do item: 135612470
5 eixo-centro de usinagem vertical SPINNER modelo U5-620 serial não.
UT0286 (novo em 2013) equipado com: Balanças ópticas, velocidade do
fuso 12.000 rpm, refrigerante através do fuso 22 bar, ferramenta
Magazine para 32 ferramentas, 10 suportes de ferramentas, tipo de
dobradiça transportadora chip, filtro de papel para limpeza de
refrigerante, sonda Renishaw, Siemens 840DE-SL controle, Manuais.
Número do item: 135577788
Telescopic Conveyor, NEW. The ergonomic design allows the operations
to be done by one or two persons, by a simple and easy movement
Extension:7.700 mm. Total length: 13.283 mm (include anti-collision
bumper) Express Snoot. Band width: 600 mm. Equipped with PVC band
with high resistance wear. The band movement is made by a motorized
drum and the telescopic movement, by a motor reducer. controlled
through a PLC. Moving is head up and down, and left and right, the
Express Snoot put the goods where it is needed, by ...
Número do item: 135577783
Número do item: 135577271
2 Farben DDS Continuos Dämpfung Front Konsole mit Kontrollen Powder
Spray Cooling Gerät Easy Plattenlader mit schnellen
Action-Plate-Klemmen \ nElectronic Doble Blechdetektor Segment Klingen
mit vertikalen Tintenreglern \ r Sehr gute Bedingungen \ nAvailable
immediately
Número do item: 135577270
2 Colors
DDS Continuos dampening
Front console with controls
Powder spray
Straight
Cooling device
Easy plate loader with quick action plate clamps
Electronic doble sheet detector
Segment blades with vertical ink regulators
Very good conditions
Available immediately
Número do item: 135575726
Engel 60 bis Krawatte weniger IMM erhöhte Spannkraft auf 800 kN von
Engel. Maschine komplett geprüft und getestet eine mit neuem
Gusskörper auf Spannseite. \ r \ r \ nTechnische Details WORKING
HOURS 45.855INJECTION VOLUMEN 154 cm3INJECECTION PRESSURE 1.581/2.190
barYEAR OF BUILDING 2003SCREW DIAMETER 35 mmTRAVEL OPENING 457 mm
Número do item: 135575725
Engel 60 to tie-bar less IMM increased clamping force to 800 kN by
Engel. Machine complete checked and tested an with new cast body on
clamping side.
Technical details
WORKING HOURS 45.855
INJECTION VOLUMEN 154 cm3
INJECTION PRESSURE 1.581/2.190 bar
YEAR OF BUILDING 2003
SCREW DIAMETER 35 mm
TRAVEL OPENING 457 mm
PLATEN SIZE 670 x 600 mm
CLAMPING FORCE 800 kN
Número do item: 135541794
LITTLE USED-MACHINE NOT UNDER POWER-SOLD \ "AS IS \" AT LOW PRICE.
Número do item: 135541793
POUCO USADO-MÁQUINA NÃO O PODER-VENDIDO COMO É A BAIXO PREÇO.
Número do item: 135466796
CA
WORKING RANGE -DEBURRING MACHINE-
design trough vibrator
total volume 283 ltr
ELECTRICAL SPECIFICATIONS
total power consumption 7.5 kW
mains power supply 14 kVA
mains voltage 460 V
mains frequency 60 Hz
Número do item: 135466797
WORKING RANGE-DEBURRING MACHINE
Design trough vibrator
Total volume 283 ltr
ELECTRICAL SPECIFICATIONS
Total power consumption 7.5 kW
Mains power supply 14 kVA
Mains voltage 460 V
Mains frequency 60 Hz
Número do item: 135466794
WORKING RANGE (DOUBLE DISC GRINDER)
Grinding wheel diameter 762 mm
COMPONENT-FEEDER
Feeder Design linear feeder
ELECTRICAL SPECIFICATIONS
mains voltage 460 V
mains frequency 60 Hz
Você não encontrar a sua máquina queria?
enviar inquérito procurado
a todos os revendedores (registo não é necessário)
