1 set of weld-on hooks suitable for Kramer large mount

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 32 mm, Bolt center: Ø 25 mm, Bottom bolt: Ø 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 32 mm, Bolt center: Ø 25 mm, Bottom bolt: Ø 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

Terex / Fermec / MF quick coupler, suitable for 700 / 800 / 900 models

cutting width 130 cm, weight 50 kg

60 cm working width, 92 l volume

Paal / BIG backhoe bucket 38 cm working width, with cutting edge without teeth, with quick-change mount, with wedge lock at the rear, Dimensions of the mount:, Bolt diameter: 40 mm, Handle/mounting width: 220 mm, LxWxH: 38x60x60, suitable for 3-6 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

LxWxH: 120x40x45 cm

Terex / Fermec / MF quick coupler, suitable for 700 / 800 / 900 models

suitable for 5 t excavator

NEW, - 240 cm width, - 0.90 m³ capacity, - 440 kg net weight, - with Merlo mount, - crocodile shovel / pelican shovel with 2 hyd. Cylinders, - strong double stiffened hold-down device, available in different working widths and with different mounts

BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!

Hydraulic Lehnhoff Lehmatic SW25 SD suitable for 30-45t excavators with 90mm bolts and handle width up to 380mm, for all attachments with MS21 or MS25 mount, Condition New

BIG adapter Manitou to Euro, Own weight: approx. 170 kg, Dimensions:, Bolt top: Ø 80 mm, Bolt bottom: Ø 36 mm, Bolt spacing (center to center): 350 mm

High tipping bucket 240 cm with Euro hitch, - Own weight: 793 kg, - HYDRAULIC CONNECTOR 1 Euro quick-release coupling ISO 12.5 M18x1.5 – Socket, - HYDRAULIC CONNECTOR 2 Euro quick-release coupling ISO 12.5 M18x1.5 – plug, - profiled sides to increase volume, - Volume: 2.28 m³, - Dig scraper strip HB500 150x16, - Scraper strip HB500 150x16 easy access to bolt lubrication, - tilt angle 109°

NEW, 1.0 m³ capacity, height 960 mm, opening width 1500 mm, 550 kg dead weight with Bobcat telehandler attachment

With 50mm bolt, mounting width 190mm,, matching VTN - Nino de Martis, Martin (old version) recording

Mustang RH20 demolition pulverizer, Technical specifications:, - Weight: about 1800 kg, - Application area: For excavators from 18 to 22 tons, - Hydraulic pressure: 300 bar, - Hydraulic flow: 140/200 L/min, - Max. back opening: 670 mm, - Pin sizes: 80 mm diameter, - Dimensions: 195 cm long x 56 cm wide x 121 cm high (excluding pallet), - Rotation: 360° hydraulic rotation, - Other features: cutting for processing reinforcing steel, wear-resistant plates and replaceable teeth on the jaws

Mustang HM202 hydraulic hammer, Technical specifications:, - Weight class: 2.5 to 6 tons, - Input power hydraulics (max.): about 17 kW, - Oil flow: 35 to 65 l/min, - Operating pressure: 100 to 150 bar, - Impact frequency: 850 to 1800 strokes/min, - Year of construction: 2025, - incl. a chisel (flat)

Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

NEW, 50 cm width, with Martin M03 mount, 78 kg dead weight, suitable for 2.8 - 3.9 t excavators

Mounting plate with Martin M03 mount, - Recording: Martin M03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with Martin M03 mount and retaining lug, - Recording: Martin M03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock