258 results

similar results found in category veículos que circulam sobre carris

Número do item: 138871268
-
70.000 €
country-es ES
Capacity 1100/800t Shut Height 1756 Slide dimensions 3350x2135
Número do item: 138866142
-
60.000 €
country-es ES
Shut Height 1220 Slide dimensions 2750x1895
Número do item: 138843506
200 Tonnen ENGEL 2-Schuss-Krawattenstange abzüglich Spritzgießmaschine mit Drehtisch auf beweglicher Platte. Die Maschine wird getestet, repariert und überprüft und kann unter der Stromversorgung angezeigt werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jahr 2002. Drehtisch 900mm Durchmesser. 2 Kerna ...
Número do item: 138843505
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! Description ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working. CLAMPING FORCE 2.000 kN YEAR OF BUILDING 20 ...
Número do item: 138749470
PRESS MECFOND model SH 2-400 POWER: 400TM TABLE DIMENSIONS: 2743-1524 Max. CLOSED USE HEIGHT: 918 mm VERTICAL TRAVEL: 610 mm SPEED: 20 GOLPES/min LOWER COJIN RACE: 305 mm TOTAL MACHINE WEIGHT: 85 TN
Número do item: 137907341
200 Tonnen ENGEL 2-Schuss-Krawattenstange abzüglich Spritzgießmaschine mit Drehtisch auf beweglicher Platte. Die Maschine wird getestet, repariert und überprüft und kann unter der Stromversorgung angezeigt werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jahr 2002. Drehtisch 900mm Durchmesser. 2 Kerna ...
Número do item: 137907340
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! Description ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working. Technical details WORKING HOURS 70.000 CL ...
Número do item: 137762589
-
35.000 €
country-pt PT
Maschine: ZPS -R-Nmodel: MCFV 1680 Nt-nxyz-Kurse: 1650 X 850 X 850 MM- und -Nr.: 1999 - r. Ntree: 6.000 RPM ISO50 Nwarehouse: 16 Werkzeuge, Controller: HEIDENHAIN 426 , r'nPesot: 11.4 TON'n__________________-r'n2 Hochfrequenzköpfe 16K + 30K RPMe Variator TDM K 250 V17 (separat erhältlich)
Número do item: 137762588
-
35.000 €
country-pt PT
Machine: ZPS Model: MCFV 1680 NT XYZ courses: 1650 X 850 X 850 MM Year: 1999 Tree: 6,000 RPM ISO50 Warehouse: 16 Tools Controller: HEIDENHAIN 426 Pesot: 11.4 TON _________ 2 heads High Frequency 16K + 30K RPMe variator TDM K 250 V17 (Can be sold separately)
Número do item: 136731066
-
BN 50.000 €
country-pt PT
Automatic Continuous baking oven – for fully automatic production of wafer sheets (refurbished) - 18 cooking plates/baking tongs - Plates dimension: 230 mm x 290 mm - Baking plate. It is possible to produce simultaneously a wafer with grid 5.0 x 0.8 mm and a wafer with grid 7.0 x 1.0 mm; - Main drive with frequency- controlled three phase drive system - 2 burners (Krom Schroder model ZKIH) with complete piping (forced fresh air and gas), cutting and mixing valves, gas inlet Krom Schroder with all accessor ...
Número do item: 136695505
HUSKY HYLECTRIC H600 RS80 / 70 (year 2011) Closing force: 6000 kN Space between columns: 1020 x 1020 mm. Size of plates: 1440 x 1480 mm. Stroke of the closing unit: 850/1450 mm. Mold height (min./max.): 330/930 mm. Mold height with support for stacked molds (min / max): 380/930 mm. Maximum separation between plates: 1780 mm. Expeller stroke: 200 mm. Ejector force: 112 kN Diameter of the columns: 168 mm. Maximum weight of the mold: 10,400 kg. Empty cycle: 3.2 s. Cycle time E6: 2.3 s. RS injection m ...
Número do item: 136070173
1475 KW Caterpillar G3516C Natural Gas Sound Enclosed Generator Sets\(25) 1475 KW Caterpillar G3516C Natural Gas Sound Attenuated Containergenerator Sets, Die Doppelfrequenz wird auf 50 HZ oder 60 HZ, 1500/1800 U/min, 400/480 Volt, Jahr 2012 bis 2014 wurden alle Leistungspakete nach OEM-Wartungsplan gewartet. Alle Erdgas-Strompakete sind in gutem Zustand und können an jeden weltweiten Standort transportiert werden, um sofort Strom zu produzieren. Bitte kontaktieren Sie uns.
Número do item: 136070172
1475 KW Caterpillar G3516C Natural Gas Sound Enclosed Generator Sets Twenty Five (25) 1475 KW Caterpillar G3516C Natural Gas Sound Attenuated Containerized Generator Sets, dual frequency will operate on 50 HZ or 60 HZ, 1500/1800 rpm, 400/480 volt, Year 2012 to 2014, all power packages were maintained in accordance with OEM maintenance schedule.All natural gas power packages are in good condition and can be transported to any worldwide location to produce immediate power. Please serious inquiries contact us.
Número do item: 135928792
Peristaltic pump. Brand Name: DL. Type: 55 Year: 1998 8, 2M3/h 4 Kw 1420/40 Rpm 10 bar pressure Dimensions: 1.000 mm wide, 1,000 mm long, 2,000 mm high.
Número do item: 135688271
Complete Zig-Zag feed line: for zig-zag band feeding, MODEL AEZD-1300-5-8000 / RB, with feeder + streightener + decoiler in a single block, with the following characteristics: - Maximum width of the strap ...mm 1306 - Maximum strap thickness . mm 5 - Maximum section of the strap, 420 N / mm .. mm² 1000 x 3.0 - Maximum section of the strap, 420 N / mm .. mm² 650 x 4.0 - Maximum section of the strap, 420 N / mm .. mm² 350 x 5.0 - Maximum weight of the coil ... 8000 kg - Maximum outside diameter of the co ...
Número do item: 135466796
WORKING RANGE -DEBURRING MACHINE- design trough vibrator total volume 283 ltr ELECTRICAL SPECIFICATIONS total power consumption 7.5 kW mains power supply 14 kVA mains voltage 460 V mains frequency 60 Hz
Número do item: 135466797
WORKING RANGE-DEBURRING MACHINE Design trough vibrator Total volume 283 ltr ELECTRICAL SPECIFICATIONS Total power consumption 7.5 kW Mains power supply 14 kVA Mains voltage 460 V Mains frequency 60 Hz
Número do item: 135466794
WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter 762 mm COMPONENT-FEEDER Feeder Design linear feeder ELECTRICAL SPECIFICATIONS mains voltage 460 V mains frequency 60 Hz
Número do item: 135466795
WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter 762 mm COMPONENT-FEEDER Feeder design linear feeder ELECTRICAL SPECIFICATIONS Mains voltage 460 V Mains frequency 60 Hz
Número do item: 135466792
WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter 600 mm grinding width max. - throughfeed grinding 120 mm material thickness max. - throughfeed grindin 20 mm GRINDING SPINDLE 1 spindle revolutions (max) 1019 /min drive power 48 kW GRINDING SPINDLE 2 spindle revolutions (max) 1019 /min drive power 48 kW COMPONENT-FEEDER Feeder Design rotary Feeder feeder velocity max. 240 mm/min feeder velocity min. 20 mm/min ELECTRICAL SPECIFICATIONS total power consumption 110 kW  ...
Número do item: 135466793
WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter 600 mm grinding width max.-throughfeed grinding 120 mm Material thickness max.-throughfeed grindin 20 mm GRINDING SPINDLE 1 Spindle revolutions (max) 1019/min Drive drive power 48 kW GRINDING SPINDLE 2 Spindle revolutions (max) 1019/min Drive drive power 48 kW COMPONENT-FEEDER Feeder Design rotary feeder feeder velocity max. 240 mm/min feeder velocity min. 20 mm/min ELECTRICAL SPECIFICATIONS Total power consumption 110 ...
Número do item: 135466790
WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter 600 mm grinding width max.-throughfeed grinding 120 mm Material thickness max.-throughfeed grindin 20 mm GRINDING SPINDLE 1 Spindle revolutions (max) 1019/min Drive drive power 48 kW GRINDING SPINDLE 2 Spindle revolutions (max) 1019/min Drive drive power 48 kW COMPONENT-FEEDER Feeder Design rotary feeder feeder velocity max. 240 mm/min feeder velocity min. 20 mm/min ELECTRICAL SPECIFICATIONS Total power consumption 110 ...
Número do item: 135466789
WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter 600 mm grinding width max. - throughfeed grinding 120 mm material thickness max. - throughfeed grindin 20 mm GRINDING SPINDLE 1 spindle revolutions (max) 1019 /min drive power 48 kW GRINDING SPINDLE 2 spindle revolutions (max) 1019 /min drive power 48 kW COMPONENT-FEEDER Feeder Design rotary Feeder feeder velocity max. 240 mm/min feeder velocity min. 20 mm/min ELECTRICAL SPECIFICATIONS total power consumption 110 kW  ...
Número do item: 135466782
PRESS DESIGN drive system hydromechanic openings in uprights yes PRESS FORCES total force (nominal) 240 to PRESS TABLE table surface (left-right) 1700 mm table surface (front-back) 1000 mm SLIDE table surface (left-right) 1700 mm table surface (front-back) 800 mm stroke rate (max.) 60 /min SLIDE (MECHAN. PRESS) slide adjustment 100 mm stroke min. 3 mm stroke max. 180 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC 550 mm ELECTRICAL SPECIFICATIONS ...
Número do item: 135466783
PRESS DESIGN Drive system hydromechanic Openings in uprights yes PRESS FORCES Total force (nominal) 240 to PRESS TABLE table surface (left-right) 1700 mm table surface (front-back) 1000 mm Slide table surface (left-right) 1700 mm table surface (front-back) 800 mm stroke rate (max.) 60/min SLIDE (MECHAN. PRESS) slide adjustment 100 mm stroke min. 3 mm stroke max 180 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC 550 mm ELECTRICAL SPECIFICATIONS  ...
Número do item: 135466780
PRESS DESIGN drive system hydraulic SLIDE total force (nominal) 400 to SLIDE (HYDR. PRESS) approximation velocity max. 200 mm/s working velocity min. 15 mm/s working velocity max. 44 mm/s return velocity max. 200 mm/s COUNTER RAM nominal force 100 to stroke 30 mm V-RING nominal force 200 to stroke 30 mm TOOL DIMENSIONS lower table (left-right) 650 mm lower table (front-back) 650 mm upper table (left-right) 850 mm upper table (front-back) 950 mm shut height max. 420 ...
Número do item: 135466781
PRESS DESIGN Hydraulic drive system Slide Total force (nominal) 400 to SLIDE (HYDR. PRESS) approximation velocity max. 200 mm/s Working velocity min. 15 mm/s Working velocity max. 44 mm/s velocity max. 200 mm/s COUNTER RAM Nominal force 100 to stroke 30 mm V-RING Nominal force 200 to stroke 30 mm TOOL DIMENSIONS Dlower table (left-right) 650 mm lower table (front-back) 650 mm Upper table (left-right) 850 mm Upper table (front-back) 950 mm shut height max. 420 mm  ...
Número do item: 135466778
PRESS DESIGN drive system hydraulic SLIDE total force (nominal) 650 to stroke 280 mm SLIDE (HYDR. PRESS) approximation velocity max. 180 mm/s working velocity min. 3 mm/s working velocity max. 40 mm/s return velocity max. 180 mm/s COUNTER RAM nominal force 130 to stroke 30 mm V-RING nominal force 320 to stroke 30 mm TOOL DIMENSIONS lower table (left-right) 1000 mm lower table (front-back) 900 mm upper table (left-right) 1000 mm upper table (front-back) 1050 mm s ...
Número do item: 135466779
PRESS DESIGN Hydraulic drive system Slide Total force (nominal) 650 to stroke 280 mm SLIDE (HYDR. PRESS) approximation velocity max. 180 mm/s Working velocity min. 3 mm/s Working velocity max. 40 mm/s velocity max. 180 mm/s COUNTER RAM Nominal force 130 to stroke 30 mm V-RING Nominal force 320 to stroke 30 mm TOOL DIMENSIONS Dlower table (left-right) 1000 mm lower table (front-back) 900 mm Upper table (left-right) 1000 mm Upper table (front-back) 1050 mm shut he ...
Número do item: 135466776
PRESS DESIGN drive system hydraulic feedstock transport direction left to right SLIDE total force (nominal) 1000 to stroke 180 mm stroke rate (max.) 30 /min SLIDE (HYDR. PRESS) approximation velocity max. 200 mm/s working velocity min. 3 mm/s working velocity max. 50 mm/s return velocity max. 200 mm/s COUNTER RAM nominal force 250 to stroke 40 mm V-RING nominal force 500 to stroke 40 mm TOOL DIMENSIONS lower table (left-right) 950 mm lower table (front-back) 1300  ...
Número do item: 135466777
PRESS DESIGN Hydraulic drive system feedstock transport direction left to right Slide Total force (nominal) 1000 to stroke 180 mm stroke rate (max.) 30/min SLIDE (HYDR. PRESS) approximation velocity max. 200 mm/s Working velocity min. 3 mm/s Working velocity max. 50 mm/s velocity max. 200 mm/s COUNTER RAM Nominal force 250 to stroke 40 mm V-RING Nominal force 500 to stroke 40 mm TOOL DIMENSIONS Dlower table (left-right) 950 mm lower table (front-back) 1300 mm U ...
Número do item: 135466775
PRESS DESIGN Hydraulic drive system feedstock transport direction left to right Slide Total force (nominal) 1200 to stroke 200 mm stroke rate (max.) 35/min SLIDE (HYDR. PRESS) approximation velocity max. 45 mm/s Working velocity min. 2 mm/s COUNTER RAM Nominal force 250 to V-RING Nominal force 500 to TOOL DIMENSIONS Dlower table (left-right) 1150 mm lower table (front-back) 1300 mm Upper table (left-right) 1150 mm Upper table (front-back) 1100 mm shut height max. 460 ...
Número do item: 135396389
COLD FORGING PRESS SCHULER 1000 TM plate 1250 X 800 MM
Número do item: 134823673
Pop Glace Entière (TK-pop) Pleine Fabrique des glace.Usine Schlagstöcke Aumont Entière pour Liquide le Entièrement rénové.Chaque Maschine Avec 4 Ou 5 Ou 6 Voies Jusqu' À l'exigence du Client. Pièce Mécanique rénovée.Partie Électrique Entièrement Rénovée Avec Plupart des Einzelteile PANASONIC, PLC, Écran tactile, Photocellule unterhaltsfreien pour Spot.La Longueur Variable Être Peut Juste Sur l' Écran est Compoused tactile.L'usine Avec 3 Maschinen Gießen Produktion: 15, 000 PCs Par Heure Pour Une  ...
Número do item: 134823672
Pop Glace (Frozen pop) pleine entière fabrique des batons of glace. Usine d'Occasion entière pour liquide le entièrement rénové. Chaque machine avec 4 ou 5 ou 6 voies jusqu' à l'exigence du client. Piece mécanique rénovée. Partie entièrement rénovée avec électrique the plupart des composants PANASONIC, PLC, écran tactile, photocellule électrique pour Spot. The peut être variable length juste sur l' écran tactile. L'usine est compoused avec 3 machines pour production: 15,000 PCs par heure  ...
Número do item: 134194303
GEMINIS - Model GHT5-G2-1000 x 3000 - Year of manufacture 2005 - Distance between centres 3,000 mm - Diameter over cross slide 680 mm - Diameter over bed 1000 mm - Main motor power S1/S6: 30/37 kW - maximum torque 4.500/5.625 Nm - CNC Siemens 840 D - Bed width: 550 mm width - Points height from the flat guide: 500 mm - Weight approx. 9,500 kg - Weight of workpiece between points (1 bezel) 6,200 kg - Weight of workpiece between points 4,800 kg - main shaft hole diameter 104 mm - Main shaft Nose: DIN  ...
Número do item: 134193888
GEMINIS - Model GHT5-G2-1000 x 3000 - Year of manufacture 2005 - Distance between centres 3,000 mm - Diameter over cross slide 680 mm - Diameter over bed 1000 mm - Main motor power S1/S6: 30/37 kW - maximum torque 4.500/5.625 Nm - CNC Siemens 840 D - Bed width: 550 mm width - Points height from the flat guide: 500 mm - Weight approx. 9,500 kg - Weight of workpiece between points (1 bezel) 6,200 kg - Weight of workpiece between points 4,800 kg - main shaft hole diameter 104 mm - Main shaft Nose: DIN  ...
Número do item: 134193792
Frequenzumrichter BAUMÜLLER in einwandfreiem Zustand
Número do item: 134193791
Número do item: 133896812
Size: 60 x 80 cms 2 Frames New electrical system Refurbished
Número do item: 133896788
Hydraulic press Loire 500 tn, CE plate 2000 x 1200 mm, frontal between tie bars 2050 mm
Número do item: 133753469
max Size 520 x 850 mm min size 100 x 120 mm Year 2000 4 Buckles Noise hoods Nigh speed feeder head Digital counter with program Electronic knife Hook on shingle belt delivery Implant machine Immaculate conditions Cleaned and checked Ready for test
Número do item: 133409568
ROTARY Feeder ( new belts) Digital counter 4 POCKETS FIRST UNIT (complete new rollers) 4 POCKETS SECOND UNIT (complete new rollers) 2 POCKETS THIRD UNIT (complete new rollers) Shingle belt delivery Very good conditions Complete cleaned, prepared and checked, ready for test Available immediately
Número do item: 131989068
novo
4.130 €
country-es ES
Hauptgenerator Dieselantrieb: 50KVA, 40Kw; Spannung: 380/220V; Bestehend aus: Generator: Modell: LU-50, Drehzahl: 1.500 u/min, Frequenz: 50 Hz, Phasen: 3; Dieselmotor: Modell: ZH4100ZD, Motor: 4-Zylinder, wassergekühlte Kühler, 4-Takt, direkte Einspritzung; maximale Leistung: 41kW, Aspiration: Turbo gesaugt, Verdichtungsverhältnis: 19, Verbrauch: 239 g/kWh; Startsystem: elektrisch 24V, Drehzahlverstellung: Mechanik, Klang-Niveau: < 70dBA; Lichtmaschine: Marke: LUCLA, Modell: LU40KW, selbst begeistert: Bürsten,  ...
Número do item: 131989067
-
4.130 €
country-es ES
Main generator DIESEL power: 50KVA, 40Kw; Voltage: 380/220V; Composed by: generator: model: LU-50/ 2019ES, speed: 1,500 rpm, frequency: 50 Hz, phases: 3; Diesel engine: model: ZH4100ZD, engine: 4-cylinder, water-cooled radiator, 4-stroke, direct injection; maximum power: 41kW, aspiration: turbo sucked, compression ratio: 19, consumption: 239 g/kWh; starting system: electric 24V, speed adjustment: mechanical, sound level: < 70dBA; Alternator: brand: LUCLA, model: LU40KW, self-excited: brushes, type protection: IP23, ...
Número do item: 131768184
Manufacturer: Transtech YOM: 2001 Max workpiece weight: 60 Ton Table diameter (min-max): 500-1600 mm Table lenght (min-max): 1200-3000 mm Total length of the cylinders: max 8000mm Power supply: 380 V 50 Hz 630 A
Número do item: 131484465
Characteristics: Spiral box elevator for optimal protection of the product. The main features are: -economical and practical, cost-effective, modular combination, easy to transport and assemble, reliable operation, low noise and safety. -transport between plants, reduces space, adjustable speed, large load capacity, lightweight design, fast installation. The spiral rail of the conveyor is the key to its unique compact construction that saves valuable floor space. With its small size of 1760 mm in diameter, th ...
Número do item: 131484248
A labeling machine or label applicator is basically composed of a labeling head with a system that detaches the label from the support paper and transfers it to the product. This system is widely used in production lines of different sectors, increasing productivity and minimizing costs and operator time. Year: 2007; 2008
Número do item: 131340641
CARU SUEDING MACHINE MOD. SMERIGLIA AS/5. YEAR 1995 ROLLER WIDTH 2000 MM SPECIAL FOR DRY AND WET EMERIZING SQUEEZING PADDER AND 5 EMERIZING CYLINDERS DUST SUCTION SYSTEM EXIT WITH ROLLER FOR A-FRAME
Você não encontrar a sua máquina queria? enviar inquérito procurado a todos os revendedores (registo não é necessário)