CNC drilling line Brand: Alberti Type: Syncro-Plus New machine Line with 5 controlled axes for vertical drilling from below. Options also allow grooving, milling and insertion of fittings. This Syncro line can be very well combined with the BMF series of Alberti. Autom. or manual loading with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimization 5 independet asex X1 Feed rate belt conveyor, 100 m/min X2 Control of reference stops, 55 m/min. X3 Workpiece transport control in relation to the workpiece width, 15 m/min. Y Drill head control, 45 m/min Z Machining depth control, 10 m/min Remark: Max. Workpiece dimensions: 3000x900x30mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width. Machining head: 1 vertical ...
Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm.
new CNC Drilling machine Brand: Alberti Type: Vector DH 6 controlled axes and two large drilling heads ensure high productivity on the Vector DH. This line can be fed manually or automatically. Two machining heads, working from above Manual or automatic loading and unloading with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling and optional with fitting cycle optimization 6 independent axes X workpiece transport along the X-axis with vacuum suction cup for autom. alignment Y1 first machining head Z1 control of machining depth, first machining head Y2 second machining head Z2 Machining depth control, second machining head W lateral pressure control Remark: Max. Workpiece dimensions: 3000x1200x50mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width ...
Cnc through feed drilling machine Brand: Cosmec Type: Star new mashine 1 x infeed air cushion table of 1500mm 1 x outfeed air cushion table of 1500mm Maximum workable piece in width 950mm Minimum workable piece in width 60mm Maximum workable piece in lenght, infinite Minimum workable piece in lenght 250mm 1 x Moving gripper 1 x Stop for reference in entrance 1 x Laser to detect the pieces lenght 1 x Drilling unit with 10 vertical + 6 horizontal spindles + saw in X 1 x Router of 8hp with ISO30 connection 1 x 13 points semiautomatic lubrification 2 x Vertical clamps with double row of pression each one with a pressing bar + a line of pressing wheels 1 x PC with 21 screen 1 x Cosmec interface Seaworthy packing Optional: 1 x 6 positions tool changer
Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW.
CNC Bearbeitungszentrum Fabrikat: IMA Typ: BIMA Gx50 E 160/630 Baujahr: 2014 - gebraucht, unüberholt, ohne Gewährleistung - Technische Daten: Bearbeitungsbereich X = 6300 mm Y = 1600 mm (max. 2000 mm bei Vertikalbearbeitung mit Hauptspindel und WZ Ø 20 mm) Z = 225 mm inkl. Spannmittel Gewicht ca. 10.500 kg Maschinenbett in schwerer Ausführung. Fahrportal in GANTRY-Bauweise. Spänetransportband Druckluft über Zentralanschluss mit 3/4 Absaugung über Zentralanschluss 250 mm. Einzelabsaugungen schon im Standard mit automatischer Schieberstauerung ausgerüstet. Absauggeschwindigkeit 28 m/s IMA Steuerungssystem ICOS CNC Hauptspindel 18 kW Werkzeug-/Adapterwechselmagazin auf Support-Rückseite mit 18 Plätzen in X-Richtung mitfahrend Werkzeug-/Adapterwechselmagazin auf Support-Rückseite mit 18 Plätzen in Y-Richtung mitfahrend vertikales Bohraggregat mit 21 Spin ...
Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly.
Swivel spindle milling machine Brand: Panhans type 245 10 New machine Technical data: Engine power: 5.5 kW / 7.5 hp table size: 1100 x 760 mm table height: 870 mm clamping height: 140 mm height adjustment: 140 mm speed: 3000 / 4500 / 6000 / 9000 rpm space requirement: 1145 x 1180 mm Net weight: approx. 800 Table milling machine with double-sided swiveling fixed milling spindle for the swiveling range from -5° to +45,5°. handwheel adjustment with analog dial gauges Belt quick tensioning device Electr. speed indicator Left and right rotation cutter quick clamping device fine planed cast iron table with rigid frame support Milling stop 215 total adjustment via handwheel incl. multiplex stop plates mechanical motor brake milling protection and pressure device GAMMA V 1629 curved milling fence 1639 Tapoa
Volume flow: 27,000m³/h, pressure increase: 3800pa, fan belt length: 3550mm, motor power: 55kW, available after June 2023.
used Vertical CNC machining center, 3 axes Brand: Biesse Type: Skipper V31 Year: 2018 only a few hours of use vertical working, feed through collet chuck Equipment machining head: - milling spindle 4,5 kW, ISO 30 - 10 individually callable vertical + 6 horizontal spindles - grooving saw Ø with 120 mm working area: 3200x900mm Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.
Edge thickness: 0.4-10mm, feed rate: 12m/min, connected load: 11kW, operational hours counter: 12,314h.
new CNC Nestingmachine, Brand: INFOTEC Type: 4621 EVO GO Technical data: Working range X axis: 2150 mm working range Y axis: 4600 mm Working range Z axis: 250 mm X / Y axes speed: 60 m/min Z axis speed: 12m/min Drill head grid 32 12 vertical spindles 8 horizontal spindles 1,7 kW System INFOTEC - EVO GO Automation of horizontal drilling in 18 mm panels (patent pending) Lateral drilling zone (requires drilling unit 12/8/2 LL) - Special unit for the C axis, which allows the transfer of the cut workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis required) Optional: - Extension of the working area in the Y-axis up to 4600 mm. (Total length of the machine set with unloading table for EVO GO is: 9100mm). - Lateral drilling range: X: 2150 mm, Y:1300 mm Dimensions of side drilling elements: - 1600 x 600 x 18 mm - maximum, - 500 x 80 x 18 m ...
With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible.
CNC unit for boring and routing Brand: Atemag Type: Function Line Extra with two tool interfaces angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 32 / ER 16 Spindle for omega router/ ER 16
Suitable for processing door seals, control: SIEMENS SIMATIC, with documentation, an on-site inspection is possible.
New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...
Table dimensions: 10,140x2240mm, milling/ drilling aggregate rotational speed: 5000-30.000/ 2100-8000/min, controls: SIEMENS SINUMERIK 840D, operational hours counter: 48,740h.
CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wi ...
Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible.