procura detalhada
4383 resultados
Ano de construção: 2001
usava
Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.
Ano de construção: 2002
usava
Weight: 9.1t, the machine is leaking and the control card is missing.
Ano de construção: 1992
usava
Clamping plate dimensions: 830x770mm, distance between tie-bars: 560x500mm, ejector stroke: 200mm, screw diameter: 60mm, injection pressure: 1778bar, weight: 11.1t, with handling.
Ano de construção: 2017
usava
Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.
Ano de construção: 2007
usava
Clamping force: 1100kN, tie bar distance: 470x470mmm, opening stroke: 1000mm, screw diameter: 40mm, max. stroke volume: 201cm³, controls: MC5, length: 4600mm, width: 2650mm, height: 2250mm, weight: 7.9t, operational hours counter: 65,200h, with Krauss Maffei LR100, 6x hoist channel control points, 4x core pull, blow-out unit, pressure accumulator, separating flap, energy saving circuit, ALS interface, 20mA interface and colour metering unit interface.
Ano de construção: 1995
usava
Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools.
Ano de construção: 1999
usava
With documentation, the machine should be tested.
Ano de construção: 2001
usava
Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.
Ano de construção: 2022
usava
Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.
Ano de construção: 2003
usava
max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg.
Ano de construção: 2009
usava
Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation.
Ano de construção: 2008
usava
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
Ano de construção: 2003
usava
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
Ano de construção: 2005
usava
Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, controls: Procan MD, length: 3250mm, width: 1140mm, height: 2040mm, weight: 2.25t, operational hours counter: 29,664h, with robot interface.
Ano de construção: 1998
usava
Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.
usava
Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm.
Ano de construção: 1997
usava
Hydraulic pressure: 210bar, weight: 3.7t.
Ano de construção: 1995
usava
Hydraulic pressure: 210bar, weight: 3.1t.
Ano de construção: 2016
usava
Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.
Ano de construção: 1997
usava
Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.