presses used for sale

Workshop press Stenhoj 100, press force 100 tons, year of construction 2006, set-up dimensions L=1700mm, H=2300mm, W=800mm, working stroke cylinder 300mm. We sell the Stenhoj 100 because our business has evolved from industrial maintenance to plant construction and the press is no longer needed for this. The press was not used often, in the first few years for normal maintenance work such as changing bearings, etc. In recent years, only occasionally. The press has always provided reliable, trouble-free services and the necessary maintenance such as oil changes have been carried out. It shows the usual signs of wear and damage to the paintwork. The new price today is approx. 10,500.00€ in almost identical design. The machine can be viewed and tested by appointment during our working hours from 06:30-15:45.

SLIDE  total force (nominal): 880 to  stroke: 305 mm  cutting velocity min.: 5 mm/s  cutting velocity max.: 70 mm/s  closing velocity: 200 mm/s  returning velocity: 200 mm/sV-RING  nominal force: 400 to  stroke: 40 mmCOUNTER RAM  nominal force: 200 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 1010 mm  lower table (front-back): 1600 mm  upper table (left-right): 1000 mm  upper table (front-back): 1000 mm  shut height max.: 460 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 450 mm  sheet thickness max.: 16 mm  feeding step min.: 1 mm  feeding step max.: 999.9 mm  sheet length min: 3950 mm  speed max.: 48 m/min  Vertical adjustment: 140 ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 15 mmV-RING  nominal force: 75 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mm  distance between columns (H-frame): 560 mm  passline opening (free passage in side columns): 270 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step max.: 999.99 mm  sheet  ...

PRESS DESIGN  drive system: knuckle-joint   feedstock transport direction: right to left SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 70 /minCOUNTER RAM  nominal force: 22 toV-RING  nominal force: 25 toTOOL DIMENSIONS  lower table (left-right): 430 mm  lower table (front-back): 490 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 230 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 180 mm  sheet thicknes ...

PRESS DESIGN  drive system: hydraulic   openings in uprights: yes   number of suspensions: 1   number of slide actions: 1   slide ejectors / cushion: yes   opening in table: no PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 1300 mm  table surface (front-back): 1300 mmSLIDE  stroke: 700 mmSLIDE EJECTOR / CUSHION  nominal force: 5 to  stroke: 20 mmTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1200 mm  distance between columns (H-frame): 1325 mmELECTRICAL SPECIFICATIONS  total power consumption: 400 kWDIMENSIONS / WEIGHTS  total height: 6100 mm  total weight approx.: 55000 kgATTACHMENTS (PRESSES)  press automation: yes   acc. to actual accident protection r ...

CONTROLS  PLC PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 12 PRESS FORCES  total force (nominal): 36 toSLIDE  slide force: 3 to  stroke: 38 mmSLIDE (MECHAN. PRESS)  variable speed: yes   main drive power: 4 kWOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 50 mm  feedstock transport direction: front-back STRIP-FEEDER  feeder type: roll feeder   sheet width max.: 50 mm  pilot release system: no   band lubrication system: optional TRANSFER SYSTEM  number of tool stations: 13   distance between tools, stroke X fixed: 63.5 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2400 mm   ...

CONTROLS  PLC SCHNEIDER PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 66 toSLIDE  slide force: 6 to  stroke: 114 mmSLIDE (MECHAN. PRESS)  variable speed: yes   stroke rate (min.): 40 /min  stroke rate (max.): 130 /min  main drive power: 7.5 kWSTRIP-FEEDER  feeder type: roll feeder TRANSFER SYSTEM  distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2875 mm  space requirements -front/back-: 1500 mm  total height: 2900 mm  total weight approx.: 7500 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   n ...

CONTROLS  PLC BECKHOFF PRESS DESIGN  drive system: knuckle-joint   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 67 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 125 toV-RING  nominal force: 125 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 560 mmSTRIP-FEEDER  feeder type: roll feeder DIMENSIONS / WEIGHTS  total weight approx.: 14000 kgATTACHMENTS -FINEBLANKING PRESS-  decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

PRESS FORCES  total force (nominal): 72 toA new electrical control system and a mechanical and lubrication rebuild are required.One used PLATARG model 611 transfer press, high speed type.Full follow cams.Number of stations: 12Number of rams: 11 + 1 slaveCapacity on any one ram: 6 tonsSpeed range: 30 – 120 SPMMax shell height: 20 mmTransfer slideMachine awaiting refurbishment

CONTROLS  PLC PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided   number of suspensions: 1 PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 1400 mm  table surface (front-back): 800 mmSLIDE  table surface (left-right): 1000 mm  table surface (front-back): 600 mmSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  autom. Slide adjustment: yes   stroke min.: 20 mm  stroke max.: 200 mm  stroke rate (max.): 45 /min  hydraulic overload protection: yes DIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 510 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 VDIMENSIONS / WEIGHTS  ...

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 10 SLIDE  stroke rate (max.): 110 /min10 stations + 1 auxiliary5 ton per stationDistance between stations: 54 mm  (2-1/8")STROKE OF CAMS (STANDARD)#1 25-35 mm  (1- 1-3/8")#2 to #10  25-41 mm, (1 - 1-5/8")Speed: 110 SPM

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 6  ... more information

PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 1   number of slide actions: 1   table cushion: no PRESS FORCES  total force (nominal): 125 toPRESS TABLE  table surface (left-right): 1100 mm  table surface (front-back): 630 mmSLIDE  table surface (left-right): 700 mm  table surface (front-back): 400 mm  stroke: 150 mm  stroke rate (max.): 70 /minSLIDE (MECHAN. PRESS)  slide adjustment: 90 mm  stroke adjustment: yes   stroke min.: 15 mm  stroke max.: 150 mm  stroke rate (min.): 20 /min  stroke rate (max.): 70 /min  main drive power: 15 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 400 mmELECTRICAL SPECIFICATIONS ...

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: link drive   feedstock transport direction: left to right SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 22 to  stroke: 8 mmV-RING  nominal force: 25 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 220 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mm  feed velocity max. ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 30 toPRESS TABLE  table surface (left-right): 350 mm  table surface (front-back): 330 mmSLIDE (MECHAN. PRESS)  stroke rate (min.): 250 /min  stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS  total weight approx.: 3800 kgATTACHMENTS (PRESSES)  decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS  conventional PRESS FORCES  total force (nominal): 30 toSLIDE (MECHAN. PRESS)  stroke rate (min.): 200 /min  stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS  total weight approx.: 3600 kgATTACHMENTS (PRESSES)  decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS  conventional PRESS FORCES  total force (nominal): 20 toSLIDE (MECHAN. PRESS)  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 38 mm  variable speed: yes   stroke rate (min.): 100 /min  stroke rate (max.): 1800 /minSTRIP-FEEDER  feeder type: roll feeder ELECTRICAL SPECIFICATIONS  total power consumption: 20 kWDIMENSIONS / WEIGHTS  total weight approx.: 3600 kgCoil Reel&Straightener KOHLER (option)

CONTROLS  electronic controls PRESS DESIGN  frame design: 4 column PRESS FORCES  total force (nominal): 400 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 800 mmSLIDE  slide force: 400 to  table surface (left-right): 1200 mm  table surface (front-back): 800 mm  stroke: 500 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 290 mm/s  working velocity min.: 25 mm/s  return velocity max.: 290 mm/s  return force: 35 toTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2255 mm  space requirements -front/back-: 1660 mm  t ...

PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES  total force (nominal): 650 toPRESS TABLE  table surface (left-right): 3000 mm  table surface (front-back): 1800 mmSLIDE  slide force: 630 to  table surface (left-right): 3000 mm  table surface (front-back): 1800 mm  stroke: 1000 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 7 mm/s  working velocity max.: 15 mm/s  return velocity max.: 120 mm/s  return force: 65 toDIE CUSHION (TABLE CUSHION)  cushion force: 250 to  stroke: 400 mm  cushion plate surface (left-right): 2500 mm  cushion  ...

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 6   table cushion: yes 6 stations plus auxiliary stationUsed for eyelet production - tooling still mounted ... more information