- (18)
- Bed Milling Machines (39)
- Bevel Gear Hobbing Machines For Straight And Spiral Bevel Gears (2)
- CNC Bed Milling Machines (36)
- CNC Milling Centers (51)
- CNC Milling Machines (135)
- CNC Portal Milling Machines (35)
- CNC Tool-Milling Machines (34)
- CNC Universal Milling Machines (28)
- Collet Pods (1)
- Console Milling Machines (10)
- Copy Milling Machines (26)
- Cylindrical Gear Hobbing Machines, Workpiece Axis Vertical (3)
- Edge-Milling Machines (4)
- End Milling Machines (13)
- Engraving Machines (4)
- Gantry milling machines (3)
- Gear hobbing machine (7)
- Gear Tooth Chamfering Machines (1)
- Groove Milling Machines (4)
- High Speed Milling Centres (HSC) (4)
- Horizontal Console Milling Machines (20)
- Horizontal Floor Type Milling And Boring Machines (1)
- Horizontal Milling And Boring Machines (1)
- Horizontal Milling Machines (11)
- Horizontal Plano Milling Machines (1)
- Horizontal Square T-Planer Type Milling Machines (2)
- Keyway Milling Machines (2)
- Metal milling machines (4)
- Milling And Boring Centres (3)
- Milling Centers (3)
- Milling Machines (146)
- Multipurpose milling machines (5)
- Other Milling Machines (3)
- Plano-milling machines (1)
- Portal And Gantry Type Milling Machines (2)
- Portal Milling Machines (19)
- Precision milling machines (1)
- Profile cutters (2)
- Rotary Indexing Table Milling Machines (2)
- Round table milling machines (32)
- Single And Double Column Milling Machines For Long Workpieces (1)
- Single-cutter spindle moulders (1)
- Spiral Cone Wheel Cutting Machines (2)
- Thread Milling Machines (1)
- Tool Carts (3)
- Tool-Milling Machines (96)
- Tooth edge milling machines (1)
- Travelling column milling machines (25)
- Universal Knee-Type Milling Machines (107)
- Universal Milling And Boring Machines (27)
- Universal Milling Machines (105)
- Universal Plano Milling Machines (10)
- Universal Tool-Milling Machines (35)
- Vertical Console Milling Machines (8)
- Vertical Knee-Type Milling Machines (1)
- Vertical Milling And Boring Machines (1)
- Vertical Milling Machines (21)
- more
- abb (10)
- Abene (4)
- Aciera (34)
- ACME (1)
- AFM (1)
- AGIE CHARMILES MIKRON (1)
- AgieCharmilles (2)
- AGMA (1)
- AKIRA SEIKI (1)
- ALCERA (1)
- ALCOR (2)
- ALESA MONTI (1)
- ALUGUSS (1)
- ALZMETALL (1)
- AMADA (1)
- AMCO-SACEM (1)
- AMF (9)
- ANAYAK (12)
- ANGER (1)
- ARBOGA (1)
- ARES - SEIKI (1)
- ARES-SEIKI (1)
- AROWA (1)
- ASSFAG (1)
- AUERBACH (6)
- AVEMAX INDUSTRIAL (1)
- Avia (8)
- AWEA (7)
- AWEA - CNC (1)
- AXA (12)
- AXILE (1)
- BARBER COLMAN (1)
- BAUBLYS (1)
- BAUER (1)
- BECKER DÃœSSELDORF (2)
- BELKI (1)
- BEMATO (2)
- BERNARDO (5)
- BIMT (1)
- BJM (1)
- BOHLE (1)
- BOHNER + KÖHLE (2)
- BOKÖ (2)
- BOMAC (1)
- BORNEMANN (1)
- BRETON (1)
- BRIDGE MACHINERY (1)
- Bridgeport (4)
- Brother (6)
- BUSCH (3)
- BUSH OPTIBELT (1)
- Butler Elgamill (2)
- BUTLER NEWALL (2)
- BUTLER-ELGAMILL (1)
- BUTLER-NEWALL (2)
- Carver (2)
- CASTEL (1)
- CB FERRARI (1)
- CEVISA (1)
- CHARLY ROBOT (1)
- CHEVALIER (1)
- Chiron (18)
- CIELLE (1)
- CINCINATTI (1)
- Cincinnati (2)
- CME (17)
- CMS (1)
- CNC (2)
- CNC-STEP (10)
- COLGAR (1)
- COMAGRAV (1)
- COMAU (1)
- COMU (1)
- COPYMAT (2)
- CORIMPEX (1)
- CORREA (30)
- CORREA ANAYAK (1)
- CORREA/ANAYAK (1)
- CSEPEL (2)
- CUGIR ROMANIA (1)
- Daewoo (2)
- DAH LIH (1)
- DAHLIH (1)
- DANDREA (4)
- DATRON (1)
- DATSUN (1)
- Deber (2)
- Deckel (144)
- DECKEL DMG (1)
- DECKEL ERSATMONITOR (1)
- Deckel Maho (51)
- DECKEL, STUDER, SAMECA (1)
- DECKEL-MAHO (8)
- DECKELMAHO (1)
- DEPO (1)
- DESCH (1)
- DIAG FRITZ WERNER (1)
- DIATEST (1)
- DIF (1)
- DIXI (1)
- ... more
Manufacturer:
(Category: 103)
New in: 1980
used
Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. ... more information
used
100 € -Table: approx. Ø 500 mm; -Spindle speed: 72 to 190 rpm. ... more information
used
Travel X/Y/Z: 1050mm/530mm/630mm, rapid traverse X/Y/Z: 24m/min, max. spindle speed: 10000rpm, max. tool diameter/length: 90mm/300mm, max. tool weight: 7kg, tool storage: 30, tool holder: ISO40. Table dimensions X/Y: 1150mm/560mm, max. table load: 700kg. Dimensions X/Y/Z: approx. 4300mm x 2300mm x 2600mm, weight: approx. 7800kg. Including suction, 10.00 spindle, IKZ (stronger pump installed). Noises on the spindle, probably caused by ball bearing damage.
New in: 2000
used
Travel X/Y/Z: 800mm/690mm/630mm, max. spindle speed: 15000 rpm, drilling capacity: 30mm. Table size X/Y: 630mm/630mm, max. workpiece weight: 1100kg, control: Siemens Sinumerik. Dimensions X/Y/Z: 6000mm/2900mm/2400mm, weight: approx. 25000kg. Spare parts available. Including chip conveyor and separate coolant system.
used
Traversal X/Y/Z: 365mm/185mm/360mm, Speed range: Various speeds depending on the gear stage: BC - 115/230 rpm, AC - 290/580 rpm, BD - 360/720 rpm, AD - 875/1750 rpm, measuring system: SINO SDS2MS, spindle orientation: horizontal/vertical. Control panel: Features stop, emergency stop and direction control. On-site inspection is possible.
New in: 1994
used
Control system: CNC532, axes: 3, operating hours: 19565h, travel X/Y/Z: 600mm/400mm/500mm. ... more information
New in: 1993
used
x-axis:16000 mmy-axis:1250 mmz-axis:3200 mmtotal power requirement:37 kWspeeds:2000 U/minSoraluce milling machine FR 16000Angle head pivotable: 2.5°Drive power: 37 KW The machine was completely overhauled in 2009: new cables, new controls. Can be viewed under power at any time - without machine table, without rotary table, without chip conveyor-- is in good condition (inspection under power is possible)
New in: 1998
used
Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.
New in: 1975
used
Working range: 1000mm/355mm, table size: 1400mm/250mm, spindle: SK50, digital display: Mitutoyo. ... more information
New in: 2005
used
x-travel:18000 mmy-travel:2500 mmz-travel:1250 mmspindle motor:31 kWspindle turning speed range:10 - 10000 U/minspindle taper::HSK A 80 number of tools:104 :A-Achse +100/-90c-axis:+/- 200 °feeds:1 - 16000 mm/minrapid traverse::16 m/minweight of the machine ca.:66 ttotal power requirement:65 kWdimensions of the machine ca.:25,5 x 10,0 x 5,2 mMachine equiped with SIEMENS 840 D control for 5 axis- NC 2-axis fork type milling head- BALLUF tool identification system- MARPOSS measuring device- tool changer for 104 tools- hand operating panel, exhauster
New in: 2006
used
Spindle speed: 12,000 rpm, control: Mazatrol, travel X/Y/Z: 1120mm/510mm/510mm (+180mm), table dimensions X/Y: 1460mm/510mm, max. table load: 1000kg, tool storage capacity: 30, rapid traverse: 36m/min. Machine works, but makes noises from the Y-axis. ... more information
used
New in: 1988
used
x-travel:1000 mmy-travel:600 mmz-travel:800 mmspindle taper: ISO:50 spindle turning speed range:20 - 4000 U/minfeeds:1 - 4000 mm/minRapid feeds x/y/z:10 m/mintotal power requirement:45 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:4,9 x 5,2 x 3,0 mMachine equiped with PHILPS CNC control- tool changer for 36 tools- NC table- universal milling head- coolant device, chip conveyor
New in: 1988
used
x-travel:1000 mmy-travel:600 mmz-travel:800 mmspindle taper ISO:50 spindle turning speed range:20 - 4000 U/mindistance vertical spindle / table:740 mmfeed speeds infinitely variable:1 - 4000 mm/minrapid traverse in x-y-z axis:10 m/min.total power requirement:45 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:5 x 6 x 3 mCNC PHILIPS 43236-station autom. toolchangeruniversal milling headNC- table b-axis chip conveyor and coolant attachment
used
2.600 € Equipped with 24-way tool change magazine; including cooling and filter installation ... more information
New in: 1994
used
x-travel:2600 mmy-travel:1000 mmz-travel:1000 mmspindle turning speed range:30 - 3500 U/minspindle taper: ISO:50 spindle motor:30 kWtotal power requirement:45 kWweight of the machine ca.:18 tdimensions of the machine ca.:6,0 x 4,5 x 3,5 mMachine equiped with HEIDENHAIN TNC 360 control for 3 axis- 2 axis manual head- coolant device
New in: 1994
used
x-travel:2600 mmy-travel:1000 mmz-travel:1000 mmspindle turning speed - stepless:30- 3500 U/minspindle taper ISO:50 table surface area:2700 x 800 mmtable load:8 ttotal power requirement:30 kWweight of the machine ca.:18 tdimensions of the machine ca.:6 x 4,5 x 3,5 mwith CNC HEIDENHAIN TNC 360 ... more information
used
x-travel:200 mmy-travel:100 mmz-travel:100 mmtotal power requirement:1,5 kWweight of the machine ca.:1,1 tdimensions of the machine ca.:0,6 x 0,6 x 1,8 mtable-size:350 x 150 mmNew class condition milling machine with vize and dividing head- Original year of manufacture unknown ... more information
New in: 1995
used
x-travel:600 mmy-travel:400 mmz-travel:420 mmtable diameter:540 mmspindle turning speed range:20 - 4000 U/minspindle motor:6 kWspindle taper ISO:40 Table dimensions:900 x 460 mmfeed range:1 - 5000 mm/mintotal power requirement:12 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:4,2 x 4,0 x 2,1 mMachine with CNC HEIDENHAIN TNC 415 automatic toolchanger 32 pocketsmeasuring probe headcoolant attachmentfixed tablehand operating panel
used