saws used for sale

sliding table saw Martin T 74 heavy-duty precision sliding table saw Axis Positioning Control Touch Screen Car. Scoring unit = prepared Motor 5.5 kW Saw blade max 500 mm \ Cutting height max 170 mm Parallelogram cross table T74 Anodized aluminum, for double-sided tilt up to 46° LCD displays, 0.01° fine adjustment for cutting angle. Aluminum Cast Construction Trimming length 3000 mm Cutting width with rip fence 1250 mm Auto. Width stop adjustment via axes Positioning control on precision guides Reading width stop via touch screen Swivel control panel over table Longitudinal fence T74 3 Speeds - Saw Blade CE version Machine from training workshop Year of construction 2009 Machine is WORKSHOP OVERHAULED in TOP CONDITION From stock Lieboch

Cutting depth:70 mmengine output:12.4 A, 220/380 V , 2 x 6 kWworking length:2500 mmdimensions of the machine ca.:3900 x 1100 x 1000 mmweight:1500 kg ... more information

used, good conditionmake Scheertype FM2 3000year of manufacture approx. 1970machine no. 102748cutting length 3000 mmsaw blade diameter approx. 180 mmrear support tablespace requirement approx. 3500 x 1000 x 1300 mmweight approx. 400 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty

saw blade protection: bei sägeblattdurchmesser 450 mm bis zu 125 mm, Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 700 mm, weight approx.: 150 kg ... more information

Description: Technical data Saw blade projection for saw blade diameter 450 mm to 125 mm Collet opening 130 mm Main saw motors 18 kW each Scoring saw motors 2.2 kW each W.02 number : 9105 QUICK CLAMPING DEVICE 'POWER-LOC' FOR HS Patented quick clamping system with high axial clamping force. Simple operation, working without without compressed air. W.04 Number : 9115 QUICK CLAMPING DEVICE 'POWER-LOC' FOR VS Patented quick clamping system with high axial clamping force. Simple operation, working without compressed air. Translated with www.DeepL.com/Translator (free version)cutting height: max 125 mm, main saw blade: 450 mm, main motor: 18 kW, scoring saw: 2,2 kW, Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 700 mm, weight approx.: 150 kg

Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 70 kg ... more information

Description: Miter band saw Cutting diameter 170 mm Saw band dimensions 2080 x 20 x 0.9 mm Table height 880 mm Cutting speed 40 + 80 m/min Cutting performance at 90° around 170 mm Cutting performance at 45° around 125 mm Cutting area at 90 degrees: rectangle 150 x 190 mm Cutting area at 45 degrees: rectangle 95 x 120 mm Total power requirement 1.1 kW Machine weight approx. 0.24 t Dimensions LxWxH 870 x 1,550 x 1.7 mmApprox. Onsite Dimension. (l x w x h): 870 x 1.550 x 1700 mm, weight approx.: 240 kg

Description: Machine incl. 3 pieces. Bandsaw blades Cutting diameter 420 mm Saw band length 4870 mm Cutting width 430 mm Table height 640 mm Profile size - max. 400 x 400 mm Cutting speed 20 - 60 m/min Saw blade length 4870 x 27 x 0.9 mm Total power requirement 1.82 kW Machine weight approx. 1.0 t Space requirement approx. 2.35 x 1.1 x 1.5 mApprox. Onsite Dimension. (l x w x h): 2,350 x 1,100 x 1,500 mm, weight approx.: 1,000 kg

Description: Double Miter Metal Band Saw with: - belt speed 35 + 70 m / min - Miter cuts up to 60 ° left and 45 ° right - Ball bearing rotary table for fast miter adjustment - Movable quick-release vice - Quick release lever - Automatic cooling Cutting area at 90 degrees: around 250 mm Cutting area at 90 degrees: square 210 mm Cutting area at 90 degrees: rectangle 290 x 210 mm Saw band length 2,965 x 27 x 0,9 mm Table height 940 mm Belt speed 35 + 70 m / min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space required approx. 1.3 x 0.8 x 1.5 mApprox. Onsite Dimension. (l x w x h): 1,300 x 800 x 1,500 mm, weight approx.: 350 kg

Description: Saw blade diameter 400 mm Cutting length max. 4000 mm Cutting area flat 140 x 190 mm Speed 2890 rpm Motor power 2.2 kW each Connected power 4.5 kW Machine weight approx. 0.75 t Dimensions LxWxH 5.0 x 1.0 x 1.7 m a pneumatic cylinder must be retrofitted.Approx. Onsite Dimension. (l x w x h): 5,000 x 1,000 x 1,700 mm, weight approx.: 750 kg

Description: Double miter metal band saw, GBS 250 Super AutoCut (20413) - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw band length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 mApprox. Onsite Dimension. (l x w x h): 1,230 x 1,700 x 1,750 mm, weight approx.: 420 kg

Feed speed: , m/min.Dimensions (L/W/H): , mmtotal power requirement: , kwweight of the machine ca.: , kgYear: , 0Arm length: , mm1 KUPER veneer splicing machine FW Junior 920---------------------------------with air heating system.For sale on behalf of the customer in the IS condition!For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm.A special glue thread is used as the adhesive medium and is zigzag orWavy line is applied by a heated thread guide. Guaranteedtight joint, high adhesion and tear resistance even with very wavy surfacesVeneer.During subsequent pressing, the glue thread is placed inside.Sanding the adhesive medium is therefore not necessary.Easy to use and efficient way of workingMethod that has now been proven 1000 times over.Specific features:- Torsion-free C-stand construction made of steel- Resistant PUR paint- Discus disc system with tolerance compensation m ...

Sawblade tiltable: ja °Length of the rolling table: , mmcutting width: , mmMotor output: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

CASOLIN tenosquaring machine model TSX3: – 3000mm steel trolley – protection suspended on the blade – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3000-4500-6000rpm – engraver D=110mm, motor hp 0,75, 8000rpm – cutting width on rip fence 950mm – spindle moulder with shaft D=35 x L=170mm, engine hp 5.5 , with 4 speeds 3000-4500-6000-8000 rpm – weight approx. 1500 kg Machine not according to CE standards, for export

Description: Table dimensions: 800 x 800 mm Cutting height: approx. 200 mm Saw blade length: 5700 mmApprox. Onsite Dimension. (l x w x h): 1,500 x 900 x 2,300 mm, weight approx.: 600 kg ... more information

Description: Machine number: 35364 With a combined circular table saw with a milling device and for slot drilling Table dimensions of the slot drilling device: 500 x 260 mm Table dimensions of the combined machine: 1000 x 820 mmApprox. Onsite Dimension. (l x w x h): 1,300 x 1,100 x 1,400 mm, weight approx.: 500 kg

Description: Machine number: 2867/1119 Table dimensions: 850 x 700 mm Saw blade can be tilted 45° Incl. mobile extraction system from the manufacturer SPÄNEXApprox. Onsite Dimension. (l x w x h): 4,000 x 1,500 x 2,400 mm, weight approx.: 300 kg ... more information

3 axis control with boom with digital display for inclination Sled with warranty Remaining warranty 4 years  ... more information

 ... more information

Description: Controller: CAD Matic V6.0 with 17' color display CAD Link interface for interfacing with external optimization programs Saw length: 3100 mm, with automatic pressure gauge for sheet alignment Main saw: ø350x4.4x75 mm, 7.5 kW, Powerlock system Saw height: 55 mm Sawing speed:5 to 60 m/min Front-zip saw: ø200x4.4x75 mm, 1.1 kW, Powerlock system Program slide: 5-60 m/min (CE limited to 25 m/min) Frames: 5 pieces Air cushion tables: 4 tables Ball jars floating on air- dimension: 650 x 2160 mm CE standard main motor: 7.5 kW, cutting length: 3,100 mm, cutting height: 55 mm, saw carriage speed forward: 5 - 60 m/min, air table: 4x, scoring saw: 1.1 kW, software: CAD Matic V6.0, Approx. Onsite Dimension. (l x w x h): 7,700 x 1,200 x 1,600 mm, weight approx.: 3,500 kg