- (5)
- Automatics (Lathes) For Bars (6)
- Bench Lathes For Precision Mechanics (26)
- Carousel Turning Machines (Lathes) (61)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (34)
- CNC Cycle Turning Machines (46)
- CNC Double Spindel Turning Maschines (Lathes) (13)
- CNC Long Turning Automatics (37)
- CNC Long Turning Machines (27)
- CNC Multiple Spindel Turning Lathes (9)
- CNC Sloping Beds (2)
- CNC Turning Automatics (28)
- CNC Turning Centers (156)
- CNC Turning Machines (448)
- Cutting-Off Machines (9)
- Cycle Lathes (36)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (296)
- Facing Disks (2)
- Facing Lathes (13)
- Facing Lathes With Tailstock (4)
- Feed Automatics (3)
- Heavy Lathes (27)
- High Precision Lathes (5)
- High Precision Turning Machines (Lathes) (10)
- Hollow Spindle Turning Machines (Lathes) (1)
- Horizontal Turning Centres (19)
- Horizontal Turning Machines (Lathes) (2)
- Longitudinal Turning Machines (Lathes) (7)
- Lunettes (13)
- Multi Spindle Automatics For Bars (13)
- Multi-spindle turn automatics (22)
- NC Universal Turning Machines (Lathes) (1)
- Other Turning Machines (35)
- Pointed Turning Automatics (Lathes) (3)
- Rotating Benches (16)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (7)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (2)
- Thread Turning Machines, External (2)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (13)
- Turning Benches (3)
- Turning Machines (Lathes) (165)
- Turning Machines (Lathes) And Turning Automatics (3)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (3)
- Universal Lathes > 800 Mm Diameter (7)
- Universal Lathes Up To 800 Mm Diameter (11)
- Universal Turning Machines (Lathes) (30)
- Vertical Turning Centres (5)
- Vertical Turning Machines (32)
- Vertical Turning Machines With Pick-Up Spindle (3)
- Vertical Turning Machines, Open Gap And Straight-Sided (2)
- Vertikal Turning Machines (Lathes) (46)
- more
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (2)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- ALZMETAL / HESSAP ET (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (4)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM / ANGELINI (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (9)
- BERG (1)
- BERNADO (1)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (21)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (22)
- BOEHRINGER MAZA (1)
- BOLEY (6)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (34)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (2)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (2)
- CINNCINATI (1)
- Citizen (34)
- CITIZEN BOLEY (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMH-QUICK TECH (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC-TAKANG (1)
- Colchester (47)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (14)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- Danobat (2)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- Diedesheim (2)
- ... more
Manufacturer:
(Category: 102)
used
New in: 1990
used
Swing over bed: 450mm, spindle rotational speed: 18-1600/min, with documentation, available in summer 2023. ... more information
New in: 1997
used
Turning length: 2300mm, center distance: 2300mm, three-jw chuck diameter: 800mm, center height: 590mm, max. turning diameter with center: 800mm. ... more information
New in: 1994
used
Hollow spindle opening diameter: 42mm, rotational speed: 56-5600/min, controls: SYSTEM TX 8F, length: 2498mm, width: 1990mm, height: 2005mm, weight: 3.8t, operational hours: 38,274h, with driven tools, various tool holders VDI30, high pressure pump, the Drive Baumüller BUH-4-55-6-002 shows an error message and has to be overhauled.
New in: 2004
used
X-travel: 200mm, z-travel: 650mm, W-travel: 750mm, swing diameter over slide: 265mm, center distance: 650mm, max. turning length: 650mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 7.2t, with documentation. ... more information
New in: 2005
used
X-travel: 200mm, z-travel: 400mm, W-travel: 670mm, swing diameter over slide: 300mm, center distance: 600mm, max. turning length: 350mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 6t, with documentation. ... more information
New in: 1997
used
Center distance: 1500mm, connected load: 24kVA, length: 3000mm, width: 1835mm, height: 1865mm, weight: 3.05t, including 250-chuck Bison, adjustable hollow spindle stop, quick-change head size C + 9 turning tool/drill rod holders. ... more information
New in: 1978
used
Center distance: 1500mm, swing over bed slide: 145mm, center height: 245mm, with copying device and documentation. ... more information
New in: 2001
used
Swing ober bed/ support: 400/ 245mm, Drehlänge: 1385mm, Spitzenweite: 2370mm, Steuerung: Fanuc Series 210i-T Anschlussleistung: 11kW, Länge: 3100mm, Breite: 1700mm, Höhe: 1600mm, Gewicht: 3,1t, mit Ersatzteilen. ... more information
New in: 2004
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.
New in: 1995
used
Main spindle opening: 30mm, clamping chuck: DIN 177E, number of tool slots: 12, controls: GE Fanuc Series 0-T, with Bar Loader IEMCA. ... more information
New in: 1996
used
Controls: Siemens S5, length: 7100mm, width: 2600mm, height: 2500mm, weight: 10.6t, with Bar Loader Iemca PRA 40/42/F, documentation, control cabinet, hydraulics, with bar guide and chip and coolant disposal was maintained regularly. ... more information
New in: 1999
used
Length: 2700mm, width: 1900mm, height: 1900mm, weight: 2.5t, with Bar Loader FMB Turbo 8-80/320/A, year of construction: 2007, Chip Conveyor Knoll, documentation and Extraction Sartorius, was maintained regularly. ... more information
used
Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders. ... more information
New in: 2007
used
Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h. ... more information
New in: 2020
used
Number of axes: 3, max. turning range: 350mm, turning length: 515mm, max. spindle speed: 8000/min, max. bar diameter: 34mm, spindle power: 11kW, control: M730UM with CELOS ERGOline Touch control panel for networking with CAD/CAM and MAPPS system, operating hours: 12,573h, including 3x external turning holder, 3x boring bar holder, 1x angular offset AGW, 1x axial AGW, 1x spindle insert tube, collet chuck for the main spindle, jaw chuck for the counter chucks, documentation, main and counter spindle with integrated motor spindle and increased speed, can be inspected on site.
New in: 1998
used
New in: 2006
used
Length: 2100mm, width: 1350mm, height: 1800mm, weight: 2.5t, the machine should be overhauled, an inspection is possible. ... more information
New in: 2005
used
There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.
New in: 2020
used
Controls: Fanuc 32iTB, operational hours counter: 3527h. ... more information