Manufacturer:
(Category: 102)
Rotational speed: 22-1800/min, an inspection is possible. ... more information
There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.
Controls: Fanuc 32iTB, operational hours counter: 3527h. ... more information
Number of tool places: 12, controls: Fanuc 32iTB, operating hours: 3611h, with bar feeder IRCO Breuning MUK 7012, standard equipment for TA series: interpolating and bidirectional compensation of mechanical errors by laser measurement, main spindle: oil-cooled main spindle unit, foot pedal for opening and closing the chuck, load indicator for main spindle motor, safety device against chuck opening in case of hydraulic pressure drop.
There are ten Automatic Lathes Hahn & Kolb DM 127 available, five more machines are available as spare parts donors, documentation, spare parts and accessories available, have been regularly serviced, inspection is possible. ... more information
Connected load: 44kVA, length: 3185mm, width: 1700mm, height: 1700mm, weight: 4.3t, spindle hours: 83,000h, with documentation and short bar feeder MULTIFEED, the bar feeder is not functional, the lathe has been serviced regularly. ... more information
Swing over bed/ slide: 400/ 190mm, center height: 220mm, center distance: 1000mm, bed width: 330mm, with documentation. ... more information
Length: 2100mm, width: 1350mm, height: 1800mm, weight: 2.5t, the machine should be overhauled, an inspection is possible. ... more information
Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. ... more information
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... more information
X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.
Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.
X-axis: 140mm, y-axis: +/-35mm, z-axis: 450mm, max. turning length: 450mm, spindle clearance: 42mm, max. rotational speed: 5600/min, max. clamping diameter: 42mm, control: TRAUB System TX 8H, length: 4250mm, width: 2076mm, height: 1917mm, weight: 4.8t, spindle hour reading spindle 1/ 2: 63,484/ 48,015h, equipment: collet chuck Hainbuch left spindle/front side, collet chuck Hainbuch right spindle/rear side, tool probing device, part ejection device counter spindle, parts conveyor belt, bar loader Traub Stamag DNH42, machine status light, tool load monitoring, coolant system 12bar, lateral chip conveyor, with accessories and 40 tool holders, 10 of which are driven, has been regularly maintained by the manufacturer, an on-site inspection is possible.
Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... more information
Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. ... more information
Length: 2300mm, width: 800mm, height: 1500mm, weight: 1.5t, supply voltage: 400V, on-site inspection is possible. ... more information
This DÖRRIES SCHARMANN VC5000/450 MC Lathe was made in 2008 in Germany. It is equipped with a SIEMENS SINUMERIK control unit. ... more information
Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible. ... more information