- (18)
- Bed Milling Machines (39)
- Bevel Gear Hobbing Machines For Straight And Spiral Bevel Gears (2)
- CNC Bed Milling Machines (36)
- CNC Milling Centers (51)
- CNC Milling Machines (135)
- CNC Portal Milling Machines (35)
- CNC Tool-Milling Machines (34)
- CNC Universal Milling Machines (28)
- Collet Pods (1)
- Console Milling Machines (10)
- Copy Milling Machines (26)
- Cylindrical Gear Hobbing Machines, Workpiece Axis Vertical (3)
- Edge-Milling Machines (4)
- End Milling Machines (13)
- Engraving Machines (4)
- Gantry milling machines (3)
- Gear hobbing machine (7)
- Gear Tooth Chamfering Machines (1)
- Groove Milling Machines (4)
- High Speed Milling Centres (HSC) (4)
- Horizontal Console Milling Machines (20)
- Horizontal Floor Type Milling And Boring Machines (1)
- Horizontal Milling And Boring Machines (1)
- Horizontal Milling Machines (11)
- Horizontal Plano Milling Machines (1)
- Horizontal Square T-Planer Type Milling Machines (2)
- Keyway Milling Machines (2)
- Metal milling machines (4)
- Milling And Boring Centres (3)
- Milling Centers (3)
- Milling Machines (146)
- Multipurpose milling machines (5)
- Other Milling Machines (3)
- Plano-milling machines (1)
- Portal And Gantry Type Milling Machines (2)
- Portal Milling Machines (19)
- Precision milling machines (1)
- Profile cutters (2)
- Rotary Indexing Table Milling Machines (2)
- Round table milling machines (32)
- Single And Double Column Milling Machines For Long Workpieces (1)
- Single-cutter spindle moulders (1)
- Spiral Cone Wheel Cutting Machines (2)
- Thread Milling Machines (1)
- Tool Carts (3)
- Tool-Milling Machines (96)
- Tooth edge milling machines (1)
- Travelling column milling machines (25)
- Universal Knee-Type Milling Machines (107)
- Universal Milling And Boring Machines (27)
- Universal Milling Machines (105)
- Universal Plano Milling Machines (10)
- Universal Tool-Milling Machines (35)
- Vertical Console Milling Machines (8)
- Vertical Knee-Type Milling Machines (1)
- Vertical Milling And Boring Machines (1)
- Vertical Milling Machines (21)
- more
- abb (10)
- Abene (4)
- Aciera (34)
- ACME (1)
- AFM (1)
- AGIE CHARMILES MIKRON (1)
- AgieCharmilles (2)
- AGMA (1)
- AKIRA SEIKI (1)
- ALCERA (1)
- ALCOR (2)
- ALESA MONTI (1)
- ALUGUSS (1)
- ALZMETALL (1)
- AMADA (1)
- AMCO-SACEM (1)
- AMF (9)
- ANAYAK (12)
- ANGER (1)
- ARBOGA (1)
- ARES - SEIKI (1)
- ARES-SEIKI (1)
- AROWA (1)
- ASSFAG (1)
- AUERBACH (6)
- AVEMAX INDUSTRIAL (1)
- Avia (8)
- AWEA (7)
- AWEA - CNC (1)
- AXA (12)
- AXILE (1)
- BARBER COLMAN (1)
- BAUBLYS (1)
- BAUER (1)
- BECKER DÃœSSELDORF (2)
- BELKI (1)
- BEMATO (2)
- BERNARDO (5)
- BIMT (1)
- BJM (1)
- BOHLE (1)
- BOHNER + KÖHLE (2)
- BOKÖ (2)
- BOMAC (1)
- BORNEMANN (1)
- BRETON (1)
- BRIDGE MACHINERY (1)
- Bridgeport (4)
- Brother (6)
- BUSCH (3)
- BUSH OPTIBELT (1)
- Butler Elgamill (2)
- BUTLER NEWALL (2)
- BUTLER-ELGAMILL (1)
- BUTLER-NEWALL (2)
- Carver (2)
- CASTEL (1)
- CB FERRARI (1)
- CEVISA (1)
- CHARLY ROBOT (1)
- CHEVALIER (1)
- Chiron (18)
- CIELLE (1)
- CINCINATTI (1)
- Cincinnati (2)
- CME (17)
- CMS (1)
- CNC (2)
- CNC-STEP (10)
- COLGAR (1)
- COMAGRAV (1)
- COMAU (1)
- COMU (1)
- COPYMAT (2)
- CORIMPEX (1)
- CORREA (30)
- CORREA ANAYAK (1)
- CORREA/ANAYAK (1)
- CSEPEL (2)
- CUGIR ROMANIA (1)
- Daewoo (2)
- DAH LIH (1)
- DAHLIH (1)
- DANDREA (4)
- DATRON (1)
- DATSUN (1)
- Deber (2)
- Deckel (144)
- DECKEL DMG (1)
- DECKEL ERSATMONITOR (1)
- Deckel Maho (51)
- DECKEL, STUDER, SAMECA (1)
- DECKEL-MAHO (8)
- DECKELMAHO (1)
- DEPO (1)
- DESCH (1)
- DIAG FRITZ WERNER (1)
- DIATEST (1)
- DIF (1)
- DIXI (1)
- ... more
Manufacturer:
(Category: 103)
used
300 € Description: Technical details: length 1010 mm, width 500 mm, height 450 mm, machine weight approx. 850 kg, additional information: clamping bracket 2 pieces, approx. 1010 x 450 / 500 x 450 mmweight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 550 mm ... more information
used
New in: 2001
used
280 € Description: - End milling machine for aluminum profiles - Serial number 9000575 - Milling capacity 250 x 120 mm - Vertical stroke approx. 110 mm - Motor power 0.75 KW - Rotational speed 2800 rpmApprox. Onsite Dimension. (l x w x h): 1,200 x 750 x 1,300 mm, weight approx.: 160 kg ... more information
New in: 1985
used
used
9.500 € Description: With HEIDENHAIN TNC 121 path control, linear path control, spindle speed range 0 to 2000 rpm, feed speeds 0.02 to 0.2 mm, with rotary swivel table, see photos for detailsweight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,800 x 2,300 mm ... more information
New in: 1989
used
X-travel: 600mm, y-travel: 400mm, z-travel: 500mm, table dimensions: 1000x400mm, rotational speed: 80-4000/min, tool cone: SK40, controls: Phillips 432/10, length: 2300mm, width: 2160mm, height: 1900mm, weight: 2.25t, operational hours counter: 49,567h. ... more information
used
2.500 € Description: Swivelling milling head, travel X approx. 900 mm, Y approx. 200 mm, Z approx. 350 mm, speed range 25 to 1300 rpm, feed rates 1 to 300 mm/rev, table surface 950 x 220 mm, machine is equipped with a counter bearing for horizontal milling, for further details see photosApprox. Onsite Dimension. (l x w x h): 1,700 x 1,600 x 1,600 mm, weight approx.: 2,800 kg
New in: 1990
used
Control: Deckel Dialog 11, with vice, an inspection is possible. ... more information
New in: 1974
used
2.200 € Description: Swivelling head, travel X approx. 400 mm, Y approx. 200, Z approx. 300 mm, speed range 56 to 1800 rpm, feed rates 11.2 to 355 mm/min, machine is equipped with a counter bearing for horizontal milling, for further details see photosApprox. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,700 mm, weight approx.: 2,800 kg
New in: 1999
used
X-travel: 600mm, y-travel: 400mm, z-travel: 400mm, spindle rotational speed: 63-3150/min, table dimensions: 800x400mm, tool holder: SK40, feed rate: 8-800/min, quill stroke: 105mm, connected load: 4kW, length: 2500mm, width: 2200mm, height: 2200mm, weight: 2.9t, with coolant device, chip guard and tool clamping.
New in: 2007
used
2.900 € Description: Attention: A vehicle with an access ramp is required for loading! Drive type: LPG Load capacity: 3.3 t Duplex full free lift mast FFT 3230 Lifting height: 3,230 mm Overall height retracted: 2,185 mm Free lift: approx. 1,475 mm Forks: 1,200 mm Oil-cooled disk brakes Further information: Brake actuation fully hydraulically assisted Continuously variable automatic transmission, electro-hydraulic Water-cooled Mitsubishi LPG engine, 4 cylinders Fully hydrostatic power steering Tires: 4-way superelastic, tire condition good (see photos)Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 2,150 mm, weight approx.: 5,750 kg
New in: 2008
used
X-travel: 500mm, y-travel: 380mm, z-travel: 360mm, main spindle/turning spindle speed: 10,500/ 3000/min, max. axis speed: 60m/min, control: Siemens 840D, with HSK-A63 and collet chuck, some spare parts are also available. ... more information
New in: 1998
used
X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, number of T-slots/width/spacing: 5/18/120mm, table dimensions: 1800x700mm, max. workpiece weight: 2.5t, connected load: 16.5kW, weight: 10.1t, with documentation and tool cones, without tools. ... more information
used
X-travel: 2520mm, y-travel: 3520mm, z-travel: 160mm, table dimensions: 2500x3500mm, control: CNC Microstep 980, length: 4320mm, width: 3100mm, height: 1820mm, weight: 900kg, including production computer with flat screen and Cenon CAM software, combination cutting/folding device, dust extraction device, industrial vacuum cleaner (1200W, 36l container volume), cooling and spraying device, automatic Z-adjustment, control cabinet, control and simultaneous interpolation of up to 5 axes, true 3D machining possible, continuous path with dynamic, pre-calculation, high machining speed exponential acceleration ramps, 4 digital outputs, 4 digital inputs, spindle interface (digital and analog), connection options are spindle controller, electronic workpiece leveling, automatic Z-adjustment, automatic tool change, automatic tool change, automatically switched tool cooling, safety device, control pan ...
New in: 1992
used
X-travel: 900mm, y-travel: 630mm, z-travel: 500mm, table dimensions: 1200x600mm, spindle drive: 15kW, tool holder: ISO/ SK 40, rotational speed: 20-6300/min, control: Heidenhain TNC 407, length: 3050mm, width: 2300mm, height: 2300mm, weight: 6.7t, with graphics screen, 40-fold tool magazine, vertical head, protective cabin, without chip conveyor and cooling lubricant device, was used for approx. 20 years in model making for plastic and wood processing, the control was replaced at the end of 2002, available from March 2024, can be inspected on site.
used
Controls: ELESTA, an inspection on site is possible. ... more information
used
With milling disks, tools and accessories, without documentation, on-site inspection is possible, year of manufacture unknown. ... more information
New in: 1989
used
X-travel: 560mm, y-travel: 500, z-travel: 450mm, rotational speed: 40-4000/min, connected load: 16.5VA, control: Contour 3, weight: 2.7t +295kg control cabinet, spindle y-axis defective, fourth axis defective, on-site inspection is possible. ... more information
used
Length: 1600mm, width: 1400mm, height: 1600mm, weight: 1.25t, with documentation and accessories, an inspection is possible. ... more information
New in: 2004
used
Max. machining length: 2,600 mm Max. transverse stroke: 440 mm Max. vertical stroke: 200 mm Milling spindle speed infinitely adjustable between 2,800 and 12,000 rpm. Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 3 pneumatically controllable copy pens 4 pneumatic material clamps Minimum Quantity Spraying Device