TOPHAMMER ENGINE - CUMMINS , 260hp,QSB6.7,Tier 4 COUNTRY OF PRODUCTION - South Korea DELIVERY - EXW  ... more information

ID3265 Adler B50 year/Year of construction 2020 approx. 1500 hours/ hours 3.1 t Well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5 t, standpipe with auger for pre-drilling, 110 m flushing drill pipe on steel pallet, complete maintenance was carried out at the end of 23. The machine was fitted with a new drill head from Eurodrill at the end of 2013 for approx. 20,000 euros. Water well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5t, standpipe with auger for pre-drilling, 110 m directional drill pipe on steel pallet, complete maintenance was carried out at the end of 23. At the end of 23, the machine received a new drill head from Eurodrill for about 20,000 euros.

ID3208 Unimog 405/12 year/Year of construction 2000 10360 hours/hours – 71.100 km Unimog with Nordmeyer DSB 2/6 drilling rig, auger pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drilling cable winch 19 kN, power flushing head 7 kNm, crushing device 11 kNm, cable impact device (cable pulling force 30 kN, drilling load 5 kN, stroke 400 mm) Unimog with Nordmeyer DSB 2/6 drilling rig, screw pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drill cable winch 19 kN, power rinsing head 7 kNm, crushing device 11 kNm, rope impact device (rope pulling force 30 kN, drilling load 5 kN, stroke 400 mm)

ID3237 Clamp KR806-3F year/Year of construction 2014 approx. 8480 hours/hours Double head slewing drive with Klemm KH22 and Klemm KD1215, divisible carriage type 202 (carriage can be shortened and 1700mm), Deutz TCD 6.1 L6 (160kW) COM 3B Tier4 i engine with diesel particulate filter, 500 mm track plate width, hydraulic clamping/breaking device type H (from 38-254 mm) Double-head rotary actuator with clamp KH22 and clamp KD1215, separable mount type 202 (mount can be shortened and 1700mm), engine Deutz TCD 6.1 L6 (160kW) COM 3B Tier4 i with diesel particulate filter, chain plate width 500 mm, hydraulic clamping-crushing device type H (from 38-254 mm)

The machine is already in Poland with us on site. , a drilling rig from the well-known Swedish brand Sandvik. Used for rocks mainly underground but can also work on the surface. This model is An excellent tool for securing high workings and tunnels, ensuring a safe working environment and constant access to the workplace. The universal screwdriver head design allows all common screw types and combinations to be used, with bolt lengths of up to 6 meters (20 feet), depending on the screwdriver head alternative chosen. The telescopic boom allows you to mount several rows of bolts without moving the machine. An optional second boom – screen holder or basket boom – increases productivity and versatility. Additional automatic functions allow the operator to focus on safe, fast and efficient rock reinforcement. The air-conditioned, soundproofed and tilting cab further enhances safety an ...

Stable drilling machine for core drilling up to borehole diameters of 1250mm; suitable for reinforced concrete; Including hydraulic power unit HAG-12.10; Including drill bit DN 1200 (length 160 cm) with used segments, DN 1000 (length 145 cm) with worn segments and DN 1000 (length 80 cm) without segments; including 1 set of new diamond segments for drill bit DN 1000 for reinforced concrete

ID3202 Wellco-Drill WD80 approx. 3110 hours/ hours Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, flushing drill head - reinforced version, drive pin and pulling bell, rod catching device, centrifugal pump, cable winch, 4 hydraulic support cylinders, control panel, machine has been general overhauled (the control blocks have been completely renewed, the chain profile is new, the interceptor is new, the drill head has been completely overhauled, all possible wear parts have been renewed, all hydraulic components have been overhauled) Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, directional drill head - reinforced design, drive journal and drawing bell, linkage interceptor, centrifugal pump, winch, 4 hydraulic support cylinders, control panel, machine has been completely overhauled (the control blocks have been completely ren ...

ID3203 Wellco-Drill WD500 year/Year of construction 1994 approx. 2780 hours/ hours Drilling rig, crown regulating load 100 kN, crown extraction load 100 kN, hydraulic power jetting head (torque 10,000 Nm), drilling pressure max. 55 kN, tractive force 55 kN, interception device max. 219 mm, 2 winches, centrifugal pump, piston pump        Drilling rig, crown control load 100 kN, crown exception load 100 kN, hydr. Power flushing head (torque 10,000 Nm), drilling pressure max. 55 kN, tensile force 55 kN, interceptor max. 219 mm, 2 winches, centrifugal pump, piston pump

ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 "MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 " MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001

ID3073 Atlas 1304 with Botec-Scheitza drill rig year/Year of construction 1990 13630 hours/hours 17 t Mobile excavator Atlas 1304 with Botec-Scheitza drilling mount for auger and down-hole hammer drilling (max. diameter 130 mm), without impact mechanism Atlas 1304 wheeled excavator with Botec-Scheitza drill rig for auger and down-the-hole hammer drilling (max. diameter 130 mm), without impact mechanism

ID3092 Clamp KR803-3 year/Year of construction 2009 approx. 10420 hours/hours Drilling rig, hydraulic hammer 1215, RT70 insertion end, Deutz diesel engine TCD2013L042V, with additional short carriage (but without clamping device) Drilling rig, hydraulic breaker 1215, plug-in end RT70, Deutz diesel engine TCD2013L042V, with additional short mount (but without clamping device)

ID2285 Clamp Rod Magazine/Rod Magazine Rod magazine for drilling rig, 3-shaft magazine Boom magazine for drilling rig, 3-bay magazine  ... more information

ID2487 Eurodrill CDH 2400 year/Year of construction 2008 1.4 t Double-head drilling rigs, ready for use, little used (approx. 500 hours) Double-head drilling rig, ready for use, little used (approx. 500 hours)  ... more information

ID2745 Hitachi KH230 year/Year of construction 1994 was overhauled in 2012, engine Deutz BF12L513 (284KW) – changed 3000 hours ago, hydraulic pump for drill, hammer and vibrator drive is a 4-stage constant pump with a capacity of 480 liters at 300bar, basic boom 36 + 2 m extension + 6 m Bär extension, with a choice of 7 t or 9 t BSP hydraulic hammer was overhauled in 2012, engine Deutz BF12L513 (284KW) – changed 3000 hours ago, hydraulic pump for drill, hammer and vibrator drive is a 4-stage constant pump with a capacity of 480 lieters at 300bar, basic boom 36 + 2 m extension + 6 m bear extension, with either 7 t or 9 t BSP hydraulic breaker

ID2752 PVE 5021S with 5t Pilemer hammer year/Year of construction 2002 approx. 7500 hours/hours Pile driver with 5 t Pilemer hammer – type DKH5L, good condition, max. vertical pile length 21m (24m with extension), max. pile weight 8,9 t, stroke of sliding brace 1500mm, max. hoisting capacity: 6,9 t at 4,6 m – 1,0 t at 11,7 m, Pile winch capacity 6,5 t (adjusted to 9 tons in 2 parts), hammer winch capacity 12,5 t (adjusted to 25 tons in 2 parts), auxiliary winch capacity 4 tons, 6-cylinder Cummins Diesel engine 6CTA8.3C (194 KW) Pile driver with 5 t Pilemer hammer – type DKH5L, good condition, max. vertical pile length 21m (24m with extension), max. pile weight 8.9 t, stroke of the push strut 1500mm, max. lifting capacity: 6.9 t at 4.6 m – 1.0 t at 11.7 m, capacity of the pile winch 6.5 t (adapted to 9 tons in 2 parts), capacity of the hammer winch 12.5 t (adapted to 25 tons ...

ID2753 Müller MS16 HFV year/Year of construction 1999 approx. 3900 hours/hours 3.5 t Vibrator, with hydraulic unit MS-A360V, clamps MSU140 for steel sheet piles and 30 m of hydraulic hoses Vibrator, with hydraulic power unit MS-A360V, clamps MSU140 for steel sheet piles and 30 m of hydraulic hoses

ID2934 ABI TM10/12,5 year/Year of construction 1995 hours/hours 10000 Pile driver, ZR20T carrier, with MRZV 500V vibrator, with hydr. Auxiliary winch (tractive force 30 kN), with single tongs and storage frame, very good condition Piling rig, carrier device ZR20T, with vibrator MRZV 500V, with hydr. Auxiliary winch (pulling force 30 kN), with single pliers and storage frame, very good condition

ID3049 Drill pipe 40 pieces of drill rods for Vermeer drilling rigs, 4.50 m (3.5"" diameter), 4 pieces of matching transport boxes 40 pieces of drill pipe for Vermeer drill rigs, 4.50 m (3.5" diameter), 4 pieces of matching transport boxes  ... more information

Horizontal drill rig, with rods on low-loaders and trucks with swivel wall boxes. Tracto Technik GRUNDODRILL 15XP complete train approx. 180m poles DB 2546 L 6x2 MP3, 467.000km Tandem low-loader trailer Complete train from 2009 ! Vehicle may be covered with advertising, labeling and/or labeling residues. Our offer is generally without new HU/AU/SP acceptance. On request, we will be happy to make you an offer from our partner workshops. Errors, typing errors and prior sale excepted. Please do not hesitate to contact us.

Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.  ... more information