other textile machines used for sale

FLEISSNER, AB 3,500 mm, with 6 drums, 1,400 mm diameter, built approx. 1985, but overhauled in 2008 and equipped with new motors and burners. Up to 250°C. With natural gas burners 1000/400 kW SIEMENS S7 controller from 2008 with touch screen Motors with frequency converter, 50 m per minute, up to 250 °C

1 IBELUS laboratory HT beaker dyeing machine, type LABIbelus 12 Infra Red, with 1 set of 12 high temperature beakers, maximal dyeing temperature 140º C, dye cycle controller IBELUS type IL-720 ... more information

1 POLYTEX pinking machine type ZO-30, cutting width 300 mm, machine supplied with 2 cutting knives: 1 new serrated knife with 4 mm serration gauge, 1 flat straight knife table size 605 mm x 315 mm, manual actuation ... more information

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation ... more information

1 POLYTEX pinking machine type ZP (Zigzag cutting), knife width 1020 mm, stroke up to 65 mm height, up to 50 cuts per minute, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge serrations, with FASNACHT security light guards, with laser cut indicator, motor power 2,2 kW, 3 x 380 V, 50 Hz, machine in immaculate condition as you can observe in the attached pictures.

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 270/975, year 2001, capacity 5 Kg per batch, autoclave diameter 270 mm, delivered with 1 carrier with 1 sword, sword useful loading height 975 mm, add vessel  ... more information

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 550/975, year 2001 and 1989, capacity each 20 Kg, autoclave diameter 550 mm, The 2 machines are delivered with total 2 bobbin carriers with 4 swords each, each word has a useful loading height 975 mm, add vessel on each machine, the 2 machines share the same electrical cabinet which was supplied by LORIS BELLINI in 2001

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 840/975, year 1998, capacity 40 Kg, autoclave diameter 840 mm, delivered with: 2 carriers with 8 swords each, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 750 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 1280/975, year 1990, capacity 150 Kg, autoclave diameter 1280 mm, delivered with: 1 carrier with 22 swords, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machines type RBNV 1280/975, year 2001, capacity 150 Kg each machine, both machines can run individually or coupled (total 300 Kg per batch), autoclave diameter 1280 mm, delivered with total: 4 carriers with 22 swords each, each word has a useful loading height 850 mm, 2 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, each machine add vessel capacity 800L with mixer

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988 ... more information

1 HORST KIND label cut and fold machine type ECO 2015, year 2014 ... more information

1 MÜLLER label cut and fold machine type LCFR2, year 2017 ... more information

1 PIMATEX ready made garment dyeing machine type MTP050, year 2005, capacity up to 50 Kg, drum diameter 120 cm, drum depth 85 cm, drum volume 960 L, drum with 3 compartments, with sampling device, with 8 add vats, equipped with AREL type ATC 304+ dye cycle controller, exterior heat exchanger and pump, machine fully LENZE and ABB inverter controlled

1 KAPPA pinking machine type 105 S knife width 1040 mm, serration gauge 4 mm machine equipped with precise hand lever feed mechanism, with laser cut indicator, motor power 3 kW, 3 x 380 V, 50 Hz, Machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with 2 new cutting boards (one to be used and one as spare), with installed cutting knife plus spare cutting knife Machine in pristine condition. It was bought for a project and was never really used. Delivered secured on it's wooden crate

1 HOZA (Germany) pinking machine type ZEN 80 (Zigzag cutting), knife width 820 mm, working width up to 800 mm, new serrated knife with 6 mm serration gauge, machine equipped with precise hand lever feed mechanism, feed mechanism settable for 2 measures between 0-320 mm, with security light guards, 3 x 380 V, 50 Hz

1 MARGASA textile waste cutting machine type CMT 600 rotary cutter, year 1996, working width 600 mm, cutting blade width 610 mm, feeding conveyor 250 cm long, exit conveyor 190 cm long, supplied with blade sharpening table and spare blade ... more information

1 MENSCHNER doubling / folding and measuring machine type RW 24/59 D, year 2001, folds article up to 300 cm in half it's width, with meter counter, with automatic selvedge control and overlaying device, entry with contact A-frame unwinder, mall roll or folded article, exit in roll of folded article, machine's motors are fully inverter controlled, with SIEMENS PLC type S7

24 PICANOL PCB boards from PICANOL looms composed of: 3 x PICANOL AISQ-B/2C-1 ref. BE151623, 1 x PICANOL AISQ-B/4C-1 ref. BE151624, 4 x PICANOL GDLP-2 ref. BE152373, 1 x PICANOL J-1 ref. BE152379, 2 x PICANOL DTS-1 ref. BE153319, 4 x PICANOL AIS-C/HP/4C-4 ref. BE153947, 2 x PICANOL AISE/HPT280/TI/6C-4 ref. BE153951, 3 x PICANOL CPUE-3 ref. BE154114, 3 x PICANOL AUT-S/EP2C-3 ref. BE154180, 1 x PICANOL SUP-3 PH600S ref. BE205734