- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOA (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (11)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (2)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- ALURO (1)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- APV (1)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- Bavelloni (2)
- BC (4)
- ... more
Manufacturer:
(Category: 1300)
new
Bulk pipe flexible The flexible rubble pipe ® is a better alternative to the standard bulk pipe and the most suitable solution for unloading your rubble from one or more floors. The rubble pipe is made of very strong material and has been tested on: glassware, concrete, stones, woodwork and various debris/waste. A flexible bulk pipe has a length of 3 meters per part and can be easily connected to another part. The product has been tested up to a maximum height of 27 meters (9 parts). No matter what height you need to pour from, the pouring pipe is all you need. It only takes a few minutes to install a bulk pipe. The bulk tube also weighs only 3 kilos per part and is foldable, making it easy to transport and move.
new
In stock as standard. Small U-head sockets, ideal for special work in crawl spaces and work on window frames. U Head Socket 1.60 Meter new -Retracted length of the screw jack: 1.00 meters. -Extended screw jack length: 1.60 meters. -Stutz is completely galvanized. -Stutz is equipped with finger protection. -Stutz is equipped with an anti-slip device. -With outer tube reinforcement -U-head size: 156x120x80 mm
New in: 1970
used
3,600 cbm/h Stacker With Tripper Car immediately available for re-location from SE-European mine; machine is still powered and can be tested as needed medium-size stacker for rail based stock yard use, to be flexibly used to stack loose soil, sand, waste, coal etc. boom length: 30 m; slewing angle: +/- 105 degree; boom luffing above ground: 2.0 to 13.3 m spreader on rails, luffing and slew able boom; incl. tripper car for a 1,400 mm belt at 5 m/s speed; boom conveyor drive and slew drive: electro mechanical; Boom Luffing: Winch; Total operating weight: approx. 280 + 65 t
New in: 1970
used
1,550 cbm/h Reclaimers; Bucket Wheel Excavators With Tripper Cars available at least until mid-2024; machines are both still powered and can be tested on site in SE-Europe; purchase of one machine only is possible, too compact open mine excavator machine, to be flexibly used to soft soil, sand, lignite etc., can operate with or without tripper car; also available as single machine at 179 T Euro each 11.6 m length of bucket wheel boom; 10 m cutting height; 7 buckets of each 350 litres volume 181 t + 35 t total operating weights
New in: 1988
used
1,550 cbm/h Capacity available at least until mid-2024; as it is and where it is; form Southern Europe compact belt wagons are important links in the mining or stock yard process between the excavator and the transport or dumping systems by increasing the working areas, can be flexibly used to sand, peat, lignite, coal etc. crawler-based belt wagon manufactured by Orenstein & Koppel; belt width 1,200 mm; belt speed 3.9 m/sec; distance from slew center to discharge pulley 28 m; discharge pulley height 14 m total operating weight approx. 125 t
New in: 1980
used
7,020 t/h rated capacity (of loose material) used to store bulk material in stockpiles in a controlled manner; is connected to the infeed conveyor belt via a tripper car; mostly used for intermediate storage of coal, for example in ports or at power plants; mounted on rails; belt width 1800 mm; belt speed 5.24 m/sec; distance from slew center to discharge pulley 23 m; discharge pulley height 8 m total operating weight approx. 150 t
used
For sale is a used vacuum pump, from the manufacturer FEZER. Incl. HANNING 7D2-7-013 engine. Type: RB0016 Vacuum: 2 mbar Connected load: 380 V The price is exclusive of VAT, free of charge from the Hesse-Germany location. Shipping by arrangement and assumption of costs as well as delivery throughout Germany possible. Subject to changes / errors in the technical data as well as prior sale.
New in: 2021
used
Injection unit: Type F75E Screw ø 36 mm Injection volume (max.) 147 cm³ Spraying speed (max.) 153 cm³/s Injection pressure (max.) 1,920 bar Holding pressure (max.) 1,720 bar Clamping unit: Clamping force (max.) 980 kN Travel 360 mm Tool size (min./max.) 150/510 mm Clear width tie rods 460 x 460 mm Die plate size 630 x 630 mm Equipment/Accessories: Automation Robot Interface EUROMAP 67 Other Interfaces Paint Dosing Unit, Cooling Unit
New in: 2005
used
Number of heads: 16, weight: approx. 800kg. Including 4 additional weighing heads with electronics. ... more information
New in: 1994
used
Max. output: 40/min, with capper, filler, inspection and inkjet printer. ... more information
New in: 2005
used
Connected load: 41kW, an inspection is possible. ... more information
used
Accessories/documentation are partially available, has been regularly serviced, on-site inspection is possible. ... more information
used
There are 4 Kuka robots with various grippers, control cabinets, housing and conveyor technology (Interroll) available. Designed for handling a power unit of wallboxes and handling the entire wallbox. KR120) Load capacity: 120kg, reach: 2700mm. KR50) Load capacity: 50kg, range: 2700mm. List with specifications of the accessories in the pictures.
New in: 1987
used
Cutting width min./max.: 25mm/1320mm, max. stack height: 140mm, pressure range: 30N-300N. ... more information
used
MAS 3a block making machine for paving blocks, hollow blocks and kerbstones. Board dimensions X/Y/Z: 1200mm/1100mm/50mm, production height min./max.: 50mm/330mm. 80x transport racks, 1700x base boards: dimensions X/Y/Z: 1200mm/1150mm/50mm. Bucket conveyor with Rekers drive and tipping drive: Bucket capacity: 1850l. 2000x pallets: Dimensions X/Y: 1000mm/1000mm. Forms: Concrete blocks: 36.5, 36.5 Z, 30, 24, 17.5, 11.5, 1.5 NF, NF. Expanded clay blocks: 36.5, 36.5 Z, 30.5, 24, 11.5. Lawn edgings: 5/25/100, 5/30/100. Kerbstones: 8/25/100, rectangular paving blocks: 10x10, 10x20, 20x20, 20x30, 30x30x8 cm, 20x20x8 cm without chamfer. Pavers: 6-8-10 H, 8er S, 6eck 7cm. Planting rings: small, large, oval (24x45x20). Special stones: lawn grids, filter stones. Including all accessories/conveyor belts etc. Documentation available. On-site inspection is possible.
used
With documentation, was maintained regularly, an inspection is possible. ... more information
New in: 2007
used
Number of axis: 6, load: 10kg, connected load: 5kVA, with Controls Yaskawa YASNAC XRC and documentation, an inspection is possible. ... more information
New in: 1997
used
Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. ... more information
New in: 1987
used
Rotorless rotational shear vulcameter with filter mats, calibration weights, new stepper motor and documentation. The device has been recalibrated and the chamber renewed, control unit has been replaced with a standard PC connection, on-site inspection is possible. ... more information
used
Number of axis: 6, load: 10kg, weight: 630kg, with controls and documentation, an inspection is possible. ... more information