- (4)
- All purpose circular saws (2)
- Automatic mitre band saws (1)
- Band resaws (15)
- Bandsaw automats (4)
- Bandsaw machines (14)
- Belt saw systems (5)
- Belt saws (67)
- Block belt saws (5)
- Building saws (1)
- Circular hand-saws (1)
- Circular sawing automats (14)
- Circular sawing machines (8)
- Circular saws (13)
- Cold circular saws (3)
- Construction timber Saws (4)
- Cut-off saws (68)
- Cutting-off saws (13)
- Dekupying saws (1)
- Disc dividing saws (28)
- Double arbour circular saws (1)
- Double miter bandsaws (1)
- Double mitre saws (15)
- Edge trimming saws (7)
- Electric chainsaws (1)
- Fine cut saws (1)
- Firewood saws (2)
- Friction circular saws (2)
- Fully automatic belt saws (3)
- Hole saws (1)
- Horizontal bandsaws (1)
- Industrial saws (1)
- Joiners circular saws (109)
- Log band sawing machines (4)
- Longitudinal circular saws (6)
- Many sheet circular saws (7)
- Miter saws (6)
- Mitre circular saws (9)
- Multi-blade saws (61)
- Notching saws (V-cut) (4)
- Panel saws (41)
- Pendulum saws (5)
- Precision circular saws (1)
- Recutting circular saws (1)
- Rocker circular saws (4)
- Special band-sawing machines (1)
- Squaring saws (15)
- Table circular saws (6)
- Veneer saws (7)
- Vertical belt sawing machines (2)
- Vertical belt saws (3)
- Wood band saws (1)
- Wood saws (8)
- Wooden circular saws (8)
- more
- A. COSTA (1)
- A.COSTA (3)
- ACM (2)
- ADIGE (1)
- AES EUROPA (1)
- Agazzani (4)
- AKE (18)
- ALDINGER (1)
- ALOIS GERLACH (1)
- ALPHA TOOLS (1)
- ALTENDORF (50)
- AMADA (1)
- ANTHON + GRENZEBACH (1)
- ANTON (1)
- Avola (2)
- B + Z (1)
- BACCI (1)
- BANDSäGEBLATT ZU NRA (1)
- BAUERLE (1)
- BAUHOLZ KREISSäGE (1)
- BELTECH (1)
- BELTECH GMBH / HERSTELLER (1)
- BERG UND SCHMID KAPPSäGE (1)
- BERG UND SCHMIDT (1)
- BERLE (1)
- Bernardo (4)
- Biesse (5)
- BOCHUD BULLE (1)
- BOEGLI (1)
- BONGIOANNI (2)
- BOSMACHINES (1)
- BOTTENE (4)
- BRAUN CANALI (1)
- BRENTA (1)
- BREVINI (1)
- BRODPOL (1)
- Bäuerle (2)
- Bögli (2)
- C W KREHER (1)
- CANALI (1)
- Casadei (6)
- Casolin (3)
- CEMI (1)
- CEMIL (1)
- Centauro (5)
- CJ (1)
- CMA-ITALY (1)
- CML (5)
- COMEC (5)
- COMEVA (1)
- COMPA (1)
- Compactsystem (3)
- COSMA (1)
- COSMEC (4)
- COSTA (4)
- CRECON DIMTER (1)
- CURSAL (3)
- Dewalt (4)
- DIMTER (12)
- DOUCET INC (1)
- DREVOSTROJ CKYNE (1)
- Düspohl (6)
- EDGER LINCK (1)
- EGURKO (1)
- EISELE (1)
- ELCON (6)
- ELEKTRA-BECKUM (1)
- ELMAG (1)
- Elumatec (2)
- ELUMATIC (1)
- EMME ELLE (1)
- ERNEX (1)
- ESSEPIGI (1)
- Esterer (7)
- ESTERER EWD (1)
- EUROMAC (1)
- EWD (1)
- EWD / PAUL (1)
- EWD ESTERER (3)
- EWD SPRINGER MICROTEC (1)
- EWD,NICOLSON,R+E, ESTERER (1)
- FELDER (6)
- FELDER FORMAT 4 (1)
- FELDER HAMMER (1)
- FERMIN ELOLA (1)
- FERMIN ELOLA - SCM (1)
- FIMAL (1)
- FINESSE (1)
- FMB (1)
- FOD (3)
- FOD BYDGOSZCZ (3)
- FORMAT (1)
- FORTE (2)
- FORTI (1)
- FRIULMAC (2)
- Frommia (2)
- FäHE (1)
- GABBIANI (4)
- GERD WOLFF (1)
- GIAI (1)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 201)
used
sliding table saw Altendorf F 45 ELMO 3 heavy-duty precision sliding table saw 3 - Axis Positioning Control Scoring unit Motor 5.5 kW Saw blade max. 350 mm Electromot. Height and swivel adjustment with digital display Trimming length 3200 mm Cutting width with rip fence approx. 1200 mm Electromot. Adjustment of the rip fence with fine adjustment Swivel control panel over table 4 Speeds - Saw Blade Additional. short mitre stop ruler with stop flaps CE version Built in 1995 by handicraft Machine is WORKING IN GOOD CONDITION From stock Lieboch
New in: 1994
used
max. cutting width : 5300 mm max. cutting height : 2200 mm Saw blade diameter : 300 mm max. machining thickness : 80 mm Saw blade bore : 30 mm Swivel saw head : manual Saw feed : manual Saw blade speed : 4750 min-1 Slatted frame: evasive Mounting : freestanding Suction : external suction Locking saw beam : manual Weight approx. : 1200 kg
New in: 2019
used
More time savings and more comfortable working. The T75 PreX supports you with its modern 10.4" touch screen control at the highest level of performance. These State-of-the-art machine operation ensures easy handling with the machine and supports you, for example, in calculating of workpiece dimensions or angles. Further data on request.
used
2.000 €
used
New in: 1993
used
Max. cutting depth: 80mm, cutting area: 5300x2200mm, length: 6665mm, width: 3015mm, height: 1810mm, weight: 840kg, with documentation. ... more information
used
used
used
used
used
New in: 2008
used
Cutting length: 4400mm, cutting width: 2200mm, working height: 950mm, blade projection: 107mm, main motor power: 13.5kW, length: 11,144mm, width: 7144mm, weight: 7.5t, with documentation, without accessories or spare parts, the machine is located in Romania. ... more information
New in: 1999
used
Blade length: 5600mm, opening width: 1000mm, band length: 2800mm, an inspection is possible. ... more information
New in: 2023
used
Max cutting width: 310mm, chain width: 340mm, max. passage/entry width: 650mm, saw blade diameter: 300-350mm, length: 1750mm, width: 1750mm, height: 1870mm, weight: 2,06t, with documentation, on-site inspection is possible. ... more information
New in: 1999
used
Special design, cutting length: 6300mm, max. passage height: 2200mm, max. trimming height: 2100mm, cutting depth: 80mm, power: 5.5 kw, saw blade diameter: 303mm, dimension display: digital, with continuous small parts support, tilt: pneumatic, extraction: 1,200 m³/h, 2 x 100mm, installation dimensions: 7620 x 1500mm, room height: 2990mm.
New in: 2006
used
Saw blade diameter: 290-303mm, max. saw blade speed: 4750/min, connected load: 4.4kW, on-site inspection is possible. ... more information
used
Vertical panel-sizing saw Brand: Putsch Type: SVP 145 M New machine Description: The SVP 145 M is a vertical panel saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and has a support grid for the workpieces to be processed, consisting of aluminium strips and plastic inserts. The automatic grid displacement ensures that the saw blade does not hit the support bars during horizontal cuts. The lower workpiece supports consist of aluminium soles and plastic inserts. For the easy movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and the saw carriage can be moved and adjusted by hand, the saw beam can be fixed in 5 vertical sawing positions for this purpose. The comfortable insertion and removal of the saw head is ensured by an ergonomically shaped handle. Standard equipment: - El ...
used
Basic machine complete with: - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm
used
Splitting saw Brand: Nardello Type: NAR-E New machine It can work as a standalone machine, or as Machine at the beginning of a production line. Actually, it can be connected to handling equipment, edge banding machines and boring machine, to optimise its production capacity. Technical data Standard Equipment - Scoring unit with electrospindle. Motor 3 kW - Postforming function - Scoring unit alignment with brushless motor - Scoring blade Ø 350 mm. - Saw unit with electrospindle. Motor 5,6kW - Saw blade Ø 350 mm. - Speed of the rotation of blades, variable with inverter - Electric lifting of the blade - Feeder unit with two feeding belts Motor 1,1 kW with inverter to control the speed - Feeding speed 6-3 m/min. (This is not the production capacity, which depends on tools, material and machines connected) - Reference fence with manual displacement and v ...
used
Splitting saw Brand: TecnoWood/Nardello Type: NAR-P New machine Ideal machine to be placed at the exit of a boring machine or a squaring edge banding machine. The boards arrive with double dimension and then they are cut. In this way you can optimize the production capacity. Technical data Standard Equipment - Scoring unit with electrospindle. Motor 3 kW - Postforming Function - Scoring alignment with brushless motor - Ø scoring blade 350 mm. - Saw unit with electrospindle. Motor 5,6 kW - Ø saw blade 350 mm. - Speed of rotation of the blade variable with inverter - Electric lifting of the blade - Feeder unit with two feeding belts Motor 1,1 kW with inverter to control the speed - Feeding speed 6-45 m/min. (This is not the production capacity, which depends on tools, material and machines connected) - Fixed reference fence - Machine movable. Movement controll ...