boring mills, machining centers used for sale

autom. boring machine Brand: VITAP Type: SIGMA B1 New machine technical detail: - 2800 mm working table - PLC and touch screen - 2 horizontal boring heads with 21 spindles each prepared for quick chucks - 2 motors each 1,5 kW - the right horizontal boring head is movable with the possibility to pass over the vertical boring groups and fitted on prismatic guide with ball bushes and electronic digital indicator. - Digital position indicators for height regulation of the horizontal boring heads - 2 pneumatic stops - changing horizontal/vertical drilling circuit - Belt conveyors fitted on springs sliding on prismatic guide with ball bushes - Front and side pneumatic pushers - Security on line circuit - 700 mm Infeed conveyor - Horizontal movement of the right head by ball bushes guide with electronic digital indicator - Standard accessories - CE standards Dust ...

Mobile dust extraction Brand: Riedex Type: DM 200 New machine Technical data: - Engine power 4 kW - Nominal volume flow 2262 m³/h - max. volume flow 3200 m³/h - 14,1 m² filter surface - motor cleaning - Residual dust content  ... more information

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content  ... more information

Mobile extraction Brand: Riedex Type: DM 300 New machine Technical data: - Motor power 7,5 kW - Nominal volume flow 5089 m³/h - max. volume flow 6000 m³/h - 31,8 m² filter surface - motorised cleaning - Residual dust content  ... more information

length: 1980 mmwidth: 670 mmheight over floor: 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Mobile extraction Make: Riedex Type: DM 350 New machine Technical data: - Motor power 11 kW - Nominal volume flow 6297 m³/h - max. volume flow 8000 m³/h - 49,6 m² filter surface - motorised cleaning - Residual dust content  ... more information

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

Mobile extraction Brand: Riedex Type: DM 160 New machine Technical data: - Motor power 3 kW - Nominal volume flow 1448 m³/h - Associated negative pressure 3000 Pa - Max. volume flow 2000 m³/h - 10.6 m² filter surface - motorised cleaning - Residual dust content  ... more information

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...

Semi-automatic boring machine Brand: VITAP Typ: ALFA 35 T New machine Technical data: - One boring head 35 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreese and any intermediate angles) - Frontal/top 51aliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator - Stroke regulation by means of 6 positions revolver (turret) (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mm) - Speed regulation of the boring group command by control board - Strengthened steel structures for tilting of the boring group - 1 motor HP. 3 (Kw 2,2) - Sta ...

 ... more information

Technical details on demand. ... more information

Working width: 630mm, max. portal passage: 690mm, clamping height: 100mm, drilling stroke: 120mm, weight: 300kg, on-site inspection is possible. ... more information

Servo motor vector axis scm Record complete Tamagawa TRE TS3351N16E196, Encoders EH38M500Z5L6X3PR Tested used part  ... more information

Würth Hand drill G&-5077-M36LJ  ... more information

Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions  ,  ,- Length approx. 230 - 3200 mm  ,  ,- Width of the single plate approx. 220 - 1220 mm  ,  ,- Width of the plates in double row ...

Description: measuring range: X = 2,700 mm / Y = 1,250 mm / Z = 85 mm (other dimensions on request) resolution: 0.01 mm accuracy (tolerance): <, +/- 0.1 mm connected load: min. 2 sockets 230 Volt AC field of application incoming goods: quality inspection of delivered parts quality assurance: sample measurement directly on the production line production: for regular checking of machine settings before the start of production of a series process control (safety in production) reduction in set-up time through automatic feedback to the operator of the drilling spindles to be adjusted in the X, Y and Z directions. quality check before delivery - assembly & training by HECHT AG, possible by exclusive arrangement. - factory overhaul 2023 - 12 months warranty with max. 2-shift operation (not valid for spare and wear parts)Approx. Onsite Dimension. (l x w x h): 3,364 x 2,600 x 1,300 mm ...

Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle: - Motor  ...

Description: The system was overhauled for every single component before it was originally installed. Disassembled sawmill plant. , Below is a description of the parts making up the plant (excluding parts not included in the sale, which are absent from the original plant). In order from the first photo (after photo 'disassembled components'):  , Band saw control panel. Saw carriage with 2 vices and variable distance. Saw carriage rope drum. BONGIOANNI saw body Diameter: 1300 mm No. 2 motors of 55 kW power for STORTI multi-blades, No. 1 motor for BONGIOANNI band saw, No. 1 variator for saw carriage. STORTI multi-blade saw Switchboard for BONGIOANNI saw and for automation. Exhausts. Rear roller conveyor of mitre saw with No. 2 stops. Roller conveyor for introduction to STORTI multi-blade saw. Band saw unloading roller conveyor. Three-way conveyor. Lower flywheel of the BONGIOAN ...