blow moulding machines used for sale

Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg. ... more information

Machine equipped for approx. 11,000 bottles per hour in 250 ml. Built in 2006. Extruder 100/24D. 6-fold head 70 mm stitch. With shapes. 2 bottles are produced in each cavity. 460V 60 Hz. Very good condition  ... more information

We offer a used TES BlueLine HiTech (2015) blow molding machine for the production of PET bottles. After the review, the machine is ready to work, adapted to the PCO thread, we can adapt to another preform thread. It is a four-nest blow molding machine with a capacity of about 7000 bottles per hour. Prepared to work with pressure up to 36 bar. BLUELINE series machines are a technologically advanced, innovative system for the production of PET preform bottles. Depending on the final product (shape / size / weight), the machines are able to achieve up to 98% efficiency, speeds up to 2000 bottles per hour from one slot. An additional advantage is the low energy consumption, which is less than 3.3W per one 1.5L bottle. Continuous development, patented solutions, precise assembly with high reliability make BLUELINE series machines the best option for the production of PET packaging. The  ...

10 and 20 ltr for sale. Closure 61 mm  ... more information

Several cut-off/cold/hot separators for sale. Different sizes  ... more information

Two-station machine for canister 4 x 5 ltr. Extruder S 100. Double and triple heads with 250 mm center to center. Clamping force 196 kN. With view strip extruder, cutting edge, removal robot, conveyor belt. Maquire mixer, refrigeration unit. Very few operating hours  ... more information

Single-station machine for containers up to 10 ltr. Extruder 60/24D. Single head with viewing stripes. Clamping force 110 kN. Canisters were produced with viewing strips in 2.5 and 5 ltr  ... more information

Two-station machine for tanks up to 10 ltr, 2 x 5 ltr, 4 x 2 ltr. with 2 extruders 90/24D, leak testing in the machine, bottle removal with lowering function. Screen in German and English  ... more information

Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free  ... more information

Description: engine power: 80 kW heating power: 49 kW max. hydraulic pressure: 250 bar max air pressure: 10 bar working pressure: 330 bar mould clamping: ,450 x 850mm  , general overhaul in 2008  , detailed dimensions in attached PDF document 2 trucks required for transport Approx. Onsite Dimension. (l x w x h): 5,500 x 1,700 x 3,400 mm, weight approx.: 19,900 kg

used double head, with WDS adjustment, in good condition. Stitch 125 mm, nozzles up to 55 mm.  ... more information

year of construction 2002 - completely refurbished in 2021 Extruder 45 mm, 22 D Control Beckhoff new pinola head new wall thickness control new hybrid pump Denison were installed. The machine was running 50 h since the refurbishing, and is as new. Further informations on request!  ... more information

This EXTRAPLAST 140to Blow Moulding machine was manufactured in the year 2015. It is equipped with a it-AUTEC Blow Control. The machine has a clamping force of 1400 kN. See tech specs details in attached PDF (German). ... more information

This YANCED YS600 Blow Moulding Machine was manufactured in the year 2015 in Spain. The machine has a clamping force of 180 kN. ... more information

Preheater VN 1000, year 2008 Automatic continuously operating with the size of the foaming vessel 975x3000 mm, Stirrer drive power 15 kW Shift of the discharge bar in 3 positions from 1500 mm to 2700 mm on: - made of stainless steel - preliminary bunker for raw materials 250 l, - dosing screw adjustable - foaming vessel with heat insulation   layer to reduce condensation - heated bottom of the chamber with on / off. To shorten   condensation - mixer with stainless steel breakers,   chrome - removable, fixed breaker, - precise dosing of the chamber with an adjustable auger and   dosing funnel, - safety device when disconnected   electric current - detached electronic control unit, - bimetal thermometer inside the blowing agent. The performance of the blowing agent depends on the quality of the feedstock, with a European material standard: - at a density o ...

SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.) Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together). Manufacturer: GABLER Thermoform GmbH & Co., Germany. Date of acceptance to accounting: 04/30/2014. Main technical characteristics: Area of forming surface, mm Maximum - 450x220 Minimum - 430x180 Maximum width of the tape, mm 480 Maximum tape thickness, mm 2 Maximum depth of molding, mm 125 Maximum noise level, dB Not more than 80 Tact at idle, tact / min 44 Mechanical performance, cycles / min 21-25 Voltage 230 / 400V, 50Hz Total power consumption, kW 64.15 Operating air pressure, bar 8 Dimensions (l ...

Urola USP-2FL Blowmoulding machine 2004 Urola double mold bottle blower of 5 lt 3,300 bottles / hour, molds and tipper included, the machine is brand new ... more information

We sell a factory for the production of PET containers. Brand: TEREKAS (Litva) Model: TFA-3 Release year: 2006 Productivity: 3100 bph Power: 50 kW Rated Power: 30 kW Kit: blow molding machine TFA-3 Airpol compressor station high pressure compressor booster dehumidifier chiller 2nd high pressure tanks preform loading manipulator preform conveyor preform hopper preform loader molds (7 sets)

Blow Molding BM 5000D full electric (2005) Machine mass: 22.800 kg Year of mnufacture: 2005 Ed.05 Max width: 4780 mm Max width with open barriers: 6820 mm Control cabinet height: 1400 mm Back width: 2270 mm Max height: 3800 mm Max length: 5770 mm Horizontal stroke: 500 mm Dry cycle time: 3,2 s Max cycles number: 13 per min Air pressure: 6-10 bar Total installed power: 44 Kw Cooling water pressure: 2,5kg/cm2 Working prssure level in the working environment: 88,3 dB(A) Total weight without extruder: 11.200 kg Extruder technical data: -Screw diameter : 90 mm -Screw motor power: 53 Kw -Rotation speed: 80 rpm -Heating power+maximum head: 24 Kw The machine is out of use but removed from production for 2 years , and can be connected electrically for inspection.

The 2017 Mikformen TM800/3 is a versatile plastic thermoforming machine designed for sale. With a weight of 13,000 kg, this robust and precise machine offers a compact design, measuring 11.50 meters in length, 2.75 meters in width (including the electrical cabinet), and 2.85 meters in height. It is specifically designed for plastic thermoforming processes, with a maximum sheet width of 840 mm (with a 60 mm stretch) and the ability to handle sheet thicknesses ranging from 0.2 mm to 3.0 mm. The TM800/3 features a maximum product height of 130 mm in both positive and negative directions, and it achieves a cycle speed of 75 cycles per minute during dry-run operations. Equipped with powerful pressure forces of 60,000 daN for the forming station, 75,000 daN for the punching station, and 80,000 daN for the cutting station, this machine delivers precise and efficient results in plastic thermofor ...