- (5)
- Barking machines (6)
- Central heating installations (16)
- Charging plants (21)
- Chip exhaust installations (2)
- Clean air extraction units (2)
- Combi-machines (40)
- Creel (2)
- Double-end tenoning machines (8)
- Extraction Systems (36)
- Filtering units (1)
- Gang saw systems (5)
- High-speed clamping carriages (2)
- Hydraulic trimmers (2)
- Lathes (17)
- Lifting devices (15)
- Macerators (13)
- Mitre joining machines (2)
- Mitre punching machines (10)
- Pallet lines (7)
- Portable dust extractors (3)
- Remote-controlled carriages (1)
- Resawing machines (2)
- Shredder (28)
- Suction units (9)
- Transportation belts (33)
- Wood crushing machines (26)
- Wood shredding systems (22)
- Wood turning lathes (9)
- Woodturning lathes (12)
- more
- A. COSTA (1)
- ABB (2)
- ADAR (1)
- ADDA (1)
- ADOLF ALDINGER (1)
- AEG (1)
- Aircraft (2)
- AIRCRAFT AIRSTAR (1)
- AIRHEAT (1)
- Alko (5)
- ALLGAIER (1)
- ALMAB (1)
- Alu (3)
- AMANO (1)
- AMBOSS + LANGBEIN (1)
- ANGELO CREMONA (1)
- ASPIR EELEC (1)
- ASTRA ASPIRAZIONI DUE (1)
- ATEMAG (2)
- ATLAS (1)
- Babcock (2)
- BACCI (2)
- Bajler Zembrod (2)
- BALDUF (1)
- BALESTRINI (1)
- BALZ (1)
- BAR GAR (1)
- BARBARIC (1)
- BARGSTEDT-RODA (1)
- BARTH (1)
- Bartling (3)
- BAUMANN (1)
- BöSCH (1)
- BECKER (3)
- BENTELE (1)
- BENZ (3)
- BESCHLAGWAGEN KOMMISONIERUNG (1)
- BEZOMBES (1)
- Biesse (6)
- BISON (1)
- BLüMLINGER (1)
- Bohm und Kruse (2)
- BOSITICH (1)
- BRANDT (25)
- BRAUN (1)
- BRODPOL (1)
- BRUECK (4)
- BRUKS (3)
- BRUKS-KLöCKNER (1)
- BUSELLATO (1)
- BÃœRKLE (1)
- CABO (1)
- CALZONI / SPERRY VICKERS (1)
- CAMAM (4)
- Cambio (2)
- Casadei (2)
- CASATI MACCHINE (1)
- CAT BLOWER (1)
- CATTINAIR (1)
- CEFLA (1)
- Celaschi (2)
- CENTAURO (4)
- CHOJNICKA (1)
- CIA (1)
- CKM (1)
- CLAAS (1)
- CMA-ITALY (1)
- CNC-STEP (4)
- CO.MA.FER (1)
- COMAFER (1)
- COMEC (4)
- COOK BOLINDER (1)
- COOK BOLINDERS (1)
- COOK BOLINDERS + MECOUTIL (1)
- COPCAL (1)
- COSTA (1)
- CPM (1)
- CRIZAF (15)
- DEC (5)
- DESTACO (1)
- DHB (1)
- DIETZ VAKUUMTURBINE (1)
- DIETZ VAKUUMVENTILATOR (1)
- dimter (3)
- DIVERSE (1)
- DMC (1)
- DUSTCONTROL (1)
- DüCKER (1)
- EDELSTAHL (1)
- ELEKTRA BECKUM (1)
- ELEKTRA-BECKUM (1)
- Elektror Karl W. Müller (2)
- ELPABOX (1)
- ELU (3)
- EMK (2)
- ENDRESS (1)
- ERNST (1)
- ERRE AUTOMAZIONI (1)
- ESTA VENTILATOR (1)
- Esterer (2)
- ... more
Manufacturer:
(Category: 209)
New in: 2021
used
Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. ... more information
New in: 1993
used
The machine cannot be started up at the moment, it will probably be the memory batteries of the control, including replacement control with display, an inspection is possible. ... more information
New in: 1992
used
Workpiece thickness: max. 45mm, workpiece length: min. 180mm, workpiece width: min. 60mm, pressure force of a roller: approx. 400N, feed speed: 16m/min max. With documentation, an on-site inspection is possible. ... more information
New in: 2018
used
There are two separators available, volume flow: 3600m³/h, total pressure: 4000Pa, operating temperature: 20°C, connected load: 11kW, operational hours counter: 5994h. ... more information
New in: 2012
used
Suitable for processing door seals, control: SIEMENS SIMATIC, with documentation, an on-site inspection is possible. ... more information
New in: 1994
used
Working area: 2890mm x 900mm x 80mm, axis working paths: X/Y/Z: 3270mm/1200mm/115mm, max. vector axis speed: 75mm/min. Spindle speed: 1200-18000rpm, max. panel thickness: 80mm, control: TRIA 7500. Dimensions X/Y/Z: 4400mm x 2865mm x 2350 mm, weight: 3000 kg. Defects: Screen, ball bearing of the Z-axis.
New in: 1998
used
A circular beam saw with approx. 3m roller conveyor to the left and right of the machine. Max. Cutting width: 840mm, max. cutting height: 280mm, speed: 1500rpm, saw diameter: 750mm, table dimensions: 1560mm/1560mm/940mm. Saw blade swivel 90° - 30°, extraction nozzle under/above the table: 160mm/100mm. Documentation available.
New in: 1979
used
Power: 11kW, rotational speed: 1450/min. ... more information
New in: 2011
used
There are two TEKA WNA 7500 AL available, volume flow: 6500m³/h, power: 7.5kW, weight: 780kg. ... more information
New in: 1993
used
X-travel: 3665mm, y-travel: 1250mm, z-travel: 200mm, max. plate thickness: 120mm, weight: 4t. ... more information
New in: 1992
used
Volume flow: 4000m³/h, power: 1.5kW, including documentation. ... more information
used
used
The machine has received a new rotor, with spare parts and documentation, without electrics and controls, an on-site inspection is possible. ... more information
New in: 1989
used
With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible. ... more information
used
Includes a loading table, a single-sided sizing and edge processing unit (KFL 23) lengthwise/crosswise and a return unit. For sizing and edge processing of worktops, side panels and shelves in small batches up to batch size 1. Workpiece parameters: Length range: 300-4500mm for worktops, 250-2600mm for side panels/shelves, 250-3100mm for niche back panels. Width range: 240-1200mm, thickness range: 12-60mm. Workpiece weight: max. 50kg. Material: chipboard, MDF. Surfaces: Melamine, laminate, CPL 0.6-0.8mm. Documentation available.
New in: 2001
used
Minimal/ nominal volume flow: 1448/ 1850m³/h, motor power: 2.2kW. ... more information
New in: 1999
used
With feeder and destacker Wemhöner 184. ... more information
New in: 2002
used
Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW. ... more information
New in: 1998
used
New in: 2000
used
Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. ... more information